Search Results

Search found 12213 results on 489 pages for 'mapped drive'.

Page 98/489 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105 | Next Page >

Why does my simple Raid 1 backup storage perform really slow sometimes?

- by randomguy

I bought 2x Samsung F3 EcoGreen 2TB hard disks to make a backup storage. I put them in Raid 1 (mirror) mode. Made a single partition and formatted it to NTFS, running Windows 7. For some reason, accessing the drive's contents (simply by navigating folders) is sometimes really slow. Like opening D:/photos/ can sometimes take several seconds before it starts showing any of the folder's contents. Same applies for other folders. What could be causing this and what could I do to improve the performance? I remember that there was an option somewhere inside Windows to choose fast access but less reliable persistence operations (read/write). It was a tick inside some dialog. At the time, it felt like a good idea to take the tick away from the option and get more reliable persistence but slower access, but now I'm regretting. I'm unable to find this dialog.. I've looked hard. I don't know, if it would make any difference. Oh, and I've ran scan disk and defrag on the drive. No errors and speed isn't improved.

Read the article
What does the 'Burst Rate' stat mean in HDTune?

- by UpTheCreek

I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks

Read the article
Last step in HDD Recovery (fixing windows)

- by Atom Computing

My dad’s hard drive corrupted which was a result of many bad sectors. Anyway, I made a clone of the drive and have now repaired it totally (recreating the MBR and MFT) and doing a series of ChkDsk's on it. I can now see all the files and folder on it and it is all intact. I currently have it as a slave in my computer (where I was doing all the repairs). When putting it back into the computer, it comes up with "A disk read error occurred: Press Ctrl + Alt + Del to Restart". I don’t know why this is happening but think it might have something to do with file permissions. I have tried a start-up recovery on the Vista boot CD and it found no problems. When trying to apply file permissions (and creating file perms for the SYSTEM group (as it didn’t have any for SYSTEM group)) it couldn't apply them for some of the System32 folder files. I have tried applying them as admin and with as powerful privileges I can get. All to no avail. When it is in my PC I can boot it up (I added it into my bootloader) and it boots up fine except when it logs in it comes up with the error - "Rundll32.exe - Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item" This message keeps coming back and nothing loads at all. Any help would be greatly received as I have got so far with the data recovery and want to avoid a reformat at all costs due to the vast number of programs installed and I don’t have much time on my hands! Thanks

Read the article
Setting up a virtual ftp directory that points to another computer

- by AngryHacker

I have II5 sitting on an old Windows 2000 Professional box. It has an FTP site there that allows me to access files. It works great, no problem at all. However, now I need to setup a virtual directory that points to a share on another computer on the network (running Windows XP Tablet Edition). The share requires a user name and password. The network is a simple workgroup (i don't have any domains or any of that). What is the correct procedure for that? I've tried setting a share via UNC and typing in the UserID/Password when asked. But when I finished, the virtual machine showed up as an error in the IIS Manager and couldn't access it. I mapped the share onto a drive and then tried to setup a virtual directory with this drive. Same result. Is there something simple I am missing? Would upgrading any part of the picture help at all?

Read the article
How to fix Windows 7 device removal notification loop

- by Barry Kelly

Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

Read the article
Running an executable on network share with CustomAction with wix?

- by martin

Hello, i have created a msi-package which compresses some xml-files to a zip-file during installation. I have created a CustomAction for this purposes: <CustomAction Id="CompressMy" BinaryKey="zipEXE" ExeCommand="a -tzip "[TEMPLATE_DIR]my.zip" "[TempSourceFolder]data.xml"" Return="check" HideTarget="no" Impersonate="no" Execute="deferred" /> The installation works fine, if i try to install to a local drive, but recently a customer wanted to install [TEMPLATE_DIR] to a network drive on Windows Vista. The CustomAction fails, because of the elevated install-user hasn't mapped the network drive, even if the installer-calling user has mapped the drive. This happens also, if I try to install to an unc-path. I use 7zip for compressing. I have added it to my msi-package. I have tried to set Impersonate="yes", but then the Installations fails, if my TEMPLATE_DIR is f.e. the ProgramData-dir. Do you have any idea what i can do? I thinked about checking if TEMPLATE_DIR is a network path, but I didn't know how i can check this. Or do you have any other Ideas how I can provide a local and a network installation while using this custom action. Would be great if there are any advices, greetings, Martin

Read the article
Method not found: 'Void Google.Apis.Util.Store.FileDataStore..ctor(System.String)'

- by user3732193

I've been stuck at this for days now. I copied the exact codes from google api samples to upload files to Google Drive. Here is the code UserCredential credential = GoogleWebAuthorizationBroker.AuthorizeAsync( new ClientSecrets { ClientId = ClientId, ClientSecret = ClientSecret, }, new[] { DriveService.Scope.Drive, DriveService.Scope.DriveFile }, "user", CancellationToken.None, new FileDataStore("MyStore")).Result; But it would throw an exception at runtime: Method not found: 'Void Google.Apis.Util.Store.FileDataStore..ctor(System.String)'. I already added the necessary Google Api dlls. Or if anyone could suggest a better code for uploading files to Google Drive in a website which implements Server-Side Authorization. Any help would be greatly appreciated. UPDATE: I changed my code to this var token = new TokenResponse { RefreshToken = "1/6hnki1x0xOMU4tr5YXNsLgutzbTcRK1M-QOTEuRVxL4" }; var credentials = new UserCredential(new GoogleAuthorizationCodeFlow(new GoogleAuthorizationCodeFlow.Initializer { ClientSecrets = new ClientSecrets { ClientId = ClientId, ClientSecret = ClientSecret }, Scopes = new[] { DriveService.Scope.Drive, DriveService.Scope.DriveFile } }), "user", token); But it also throws an exception: Method not found: 'Void Google.Apis.Auth.OAuth2.Flows.GoogleAuthorizationCodeFlow..ctor(Initializer). Is the problem with the dlls?

Read the article
Mounting NAS drive with cifs using credentials file through fstab does not work

- by mahatmanich

I can mount the drive in the following way, no problem there: mount -t cifs //nas/home /mnt/nas -o username=username,password=pass\!word,uid=1000,gid=100,rw,suid However if I try to mount it via fstab I get the following error: //nas/home /mnt/nas cifs iocharset=utf8,credentials=/home/username/.smbcredentials,uid=1000,gid=100 0 0 auto .smbcredentials file looks like this: username=username password=pass\!word Note the ! in my password ... which I am escaping in both instances I also made sure there are no eol in the file using :set noeol binary from Mount CIFS Credentials File has Special Character chmod on .credentials file is 0600 and chown is root:root file is under ~/ Why am I getting in on the one side and not with fstab?? I am running on ubuntu 12 LTE and mount.cifs -V gives me mount.cifs version: 5.1 Any help and suggestions would be appreciated ... UPDATE: /var/log/syslog shows following [26630.509396] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [26630.509407] CIFS VFS: Send error in SessSetup = -13 [26630.509528] CIFS VFS: cifs_mount failed w/return code = -13 UPDATE no 2 Debugging with strace mount through fstab: strace -f -e trace=mount mount -a Process 4984 attached Process 4983 suspended Process 4985 attached Process 4984 suspended Process 4984 resumed Process 4985 detached [pid 4984] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4984] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = -1 EACCES (Permission denied) mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Process 4983 resumed Process 4984 detached Mount through terminal strace -f -e trace=mount mount -t cifs //nas/home /mnt/nas -o username=user,password=pass\!wd,uid=1000,gid=100,rw,suid Process 4990 attached Process 4989 suspended Process 4991 attached Process 4990 suspended Process 4990 resumed Process 4991 detached [pid 4990] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4990] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = 0 Process 4989 resumed Process 4990 detached

Read the article
100% iowait + drive faults in dmesg

- by w00t

Hi, I have a server on which resides a fairly visited web app. It has a raid1 of 2 HDDs, 64MB Buffer, 7200 RPM. Today it started throwing out errors like: kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen kernel: ata2.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in kernel: res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) kernel: ata2.00: status: { DRDY } kernel: ata2: hard resetting link kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kernel: ata2.00: max_sectors limited to 256 for NCQ kernel: ata2.00: max_sectors limited to 256 for NCQ kernel: ata2.00: configured for UDMA/133 kernel: sd 1:0:0:0: timing out command, waited 7s kernel: ata2: EH complete kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) kernel: sda: Write Protect is off kernel: SCSI device sda: drive cache: write back All day long it has been in load higher than 10-15. I am monitoring it with atop and it gives some bizarre readings: DSK | sda | busy 100% | read 2 | write 208 | KiB/r 16 | KiB/w 32 | MBr/s 0.00 | MBw/s 0.65 | avq 86.17 | avio 47.6 ms | DSK | sdb | busy 1% | read 10 | write 117 | KiB/r 17 | KiB/w 5 | MBr/s 0.02 | MBw/s 0.07 | avq 4.86 | avio 1.04 ms | I frankly don't understand why only sda is taking all the hit. I do have one process that is constantly writing with 1-2megs but what the hell.. 100% iowait?

Read the article
Windows Home Server installation fails because it can't find the DVD drive anymore

- by BBlake

I've got an old Dell Dimension 8300 desktop I decided to convert into a WHS box. I popped in a pair of 1 TB SATA drives, which were recognized fine by the BIOS and the currently installed OS (XP), so I decided to go ahead and install WHS. Near the end of the installation, WHS acts like it can no longer find the DVD drives (either of them, the box has a DVDROM and a DVDRW). The specific error is gives is the "Can't configure storage" error. I've found several forums where people say they get this error if they remove the boot DVD during the installation (at the time of the first reboot). However, I never removed the DVD. After the error, if fails into WHS, so it did mostly install and I can work with WHS. However, it refuses to recognize the network card, video card and while it shows the two DVD drives, any CD/DVD I insert in either drive the system says is corrupted and unreadable, even though none of them are. I've tried several reinstalls both removing and not removing the DVD, but the result is the same regardless. Any other tricks anyone found? If I can't figure this out, maybe I'll just install SBS2008 and fake it up to be similar to WHS with some addin tools. Shouldn't be too hard to create something since WHS is based on SBS2003 anyway.

Read the article
How to move Mdadm RAID drive (EBS based) to different AWS Instance

- by Stanley

We have a media-rich web application that is hosted on AWS. We have several Web Servers and we have an NFS server. On the NFS server (Linux server) we have several EBS volumes that are mounted and we've used mdadm to implement the different mounted volumes as a single RAID volume. The Web Servers simply access the NFS storage through a mount point. Amazon has now let us know that they will be performing power maintenance on this server in a couple of days time. Since all our media is on here it would render our site unusable for the hours while Amazon is working on it. We want to try and prevent this downtime. I was thinking that we can prevent server downtime by perhaps setting up a new server temporarily and attaching the EBS drives (raid volume) to that server and have our web servers point there during maintenance. This is a very high risk operation since this involves several terabytes of our production data. What would be the safe way to move over our logical raid drive (md0) to a new amazon instance? I was hoping that I could start with building the new server, mounting the ebs volumes and assembling the RAID partition using mdadm --assemble --scan before unmounting from the existing instance so that I can first test that everything works and thus having it mounted on two instances at the same time, but I don't believe that is possible with the way that filesystems work. How do I move a Linux software RAID to a new machine? suggests a way to move drives, but isn't really a cloud-based question. Perhaps there are simpler ways to prevent system downtime with our solution being hosted on the cloud? I have considered taking an EBS snapshot, but that tries to replicate all the many terabytes of mounted storage, so this is not a practical solution. Any ideas?

Read the article
Windows : Map-a-network-drive to a remote Shared-Folder (on QNAP NAS) using OpenVPN

- by spelltox

Provided my lack of networking knowledge, I've been struggling with this issue for quite a few days now : I have a QNAP-TS212 NAS on which i've created a shared-folder (mostly excel files). All the computers in the local network (windows) are able to access it without any problem. Now, i want to access that shared-folder remotely (windows client), so : I enabled OpenVPN (and PPTP) in QNAP admin. Installed OpenVPN on the remote client. Applied the configuration file that the QNAP generated - Configuration (openvpn.ovpn) : client dev tun script-security 3 proto udp remote ***MY_WAN_IP*** 1194 resolv-retry infinite nobind ca ca.crt auth-user-pass reneg-sec 0 cipher AES-128-CBC comp-lzo OpenVPN connect successfully from the remote client. Now, here's my problem : I can ping the NAS (got IP 10.8.0.1) from the remote client, But when i try to map-a-network-drive, i don't see the shared folder or the NAS or any of the other computers in the network... I checked - all computers are in "WORKGROUP" workgroup. I'm probably missing some basic knowledge, So - any help would be greatly appreciated ! Many thanks.

Read the article
How to move your Windows User Profile to another drive in Windows 8

- by Mark

I like to have my user folder on a different drive (D:) than my OS is (C:). Reading the following post I decided to give it a try. All went quite well, untill I found out that my Windows 8 Apps won't execute anymore (other than that I didn't noticed any problems). My apps do work, while using an account that isn't moved. In the eventviewer I've found error messages like these: App <Microsoft.MicrosoftSkyDrive> crashed with an unhandled Javascript exception. App details are as follows: Display Name:<SkyDrive>, AppUserModelId: <microsoft.microsoftskydrive_8wekyb3d8bbwe!Microsoft.MicrosoftSkyDrive> Package Identity:<microsoft.microsoftskydrive_16.4.4204.712_x64__8wekyb3d8bbwe> PID:<4452>. The details of the JavaScript exception are as follows Exception Name:<WinRT error>, Description:<Loading the state store failed. > , HTML Document Path:</modernskydrive/product/skydrive/App.html>, Source File Name:<ms-appx://microsoft.microsoftskydrive/jx/jx.js>, Source Line Number:<1>, Source Column Number:<27246>, and Stack Trace: ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:27246 localSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:51544 _initSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:54710 getApplicationStatus(boolean) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:48180 init(object) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:45583 Application(number, boolean) ms-appx://microsoft.microsoftskydrive/modernskydrive/product/skydrive/App.html:216:13 Anonymous function(object) Using ProcMon, I see a lot of access denied messages, like these: Date & Time: 12-9-2012 9:32:20 Event Class: File System Operation: CreateFile Result: ACCESS DENIED Path: D:\Users\John\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe\Settings\settings.dat TID: 2520 Duration: 0.0000149 Desired Access: Read Data/List Directory, Write Data/Add File, Read Control Disposition: OpenIf Options: Sequential Access, Synchronous IO Non-Alert, No Compression Attributes: N ShareMode: None AllocationSize: 0 Any idea how to solve this? I noticed that the app folders e.g.: D:\Users\john\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe had a different owner than the old profile folder had. Old profile folder had john as owner where my new profile folder had the Administrators group as owner. Changing this didn't help unfortunately.

Read the article
How do I reinitialise a failed RAID 5 drive using terminal on Ubuntu Server

- by Stephen

I've currently put together a new system and part of that has been creating a software RAID 5 using 'mdadm' in Ubuntu Server. I successfully got to the point where I create the array using: sudo mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 I left it to do its thing overnight then used the following command to check on it: watch cat /proc/mdstat To which the following was returned: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[4](S) sdc1[2] sdb1[1] sda1[0](F) 5860535808 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/2] [_UU_] unused devices: <none> It appears that one has failed (and I'm not too savvy with why another is a spare). So, just to be sure that something else isn't amiss I wanted to try and re-engage the failed drive. Can someone explain how I can do that and what I should do with the spare (if anything). And also how do I know when synchronisation is complete? The tutorial I used to get this far is located here: http://sonniesedge.co.uk/2009/06/13/software-raid-5-on-ubuntu-904/ Many thanks! p.s. Here is some extra information that may help: sudo mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Mon Jun 18 21:14:21 2012 Raid Level : raid5 Array Size : 5860535808 (5589.04 GiB 6001.19 GB) Used Dev Size : 1953511936 (1863.01 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon Jun 18 21:50:26 2012 State : clean, FAILED Active Devices : 2 Working Devices : 3 Failed Devices : 1 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Name : myraidbox:0 (local to host myraidbox) UUID : a269ee94:a161600c:fb1665e7:bd2f27b3 Events : 13 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 0 0 3 removed 0 8 1 - faulty spare /dev/sda1 4 8 49 - spare /dev/sdd1

Read the article
Windows Phone sync error when syncing with iTunes on different Hard Drive

- by njallam

I have my iTunes library file on a separate hard drive (which I believe may be the cause of the problem) and I have been trying to use it to synchronize with my Windows Phone. I would like to first note that if I set up my phone to synchronize with 'Windows Libraries', then it works fine. This is however not ideal as I have categorised my music and made playlists etc, on iTunes. When I first link my Windows Phone to the Windows Phone App (for desktop) and select iTunes from the above selection, I get the following error message: After searching that error, I found the following forum threads: Fix for error 8300300B when trying to sync Lumia 920 Windows 8 Phone in PC? Error code 8300300B on Windows Phone 8 while trying to sync I've tried the workarounds described in the above threads, however, they did not work for me. If I ignore that error message, I see the expected interface, along with all of my iTunes library's media, however the 'Sync' button is greyed out. I have tried some other things to try and fix this: Removing the app's AppData folder Uninstalling, reinstalling Using the full-screen modern app (does not allow for iTunes syncing)

Read the article
Windows: disable remote access of local drive, even by domain admin

- by Matt

We have a network of Windows 7 PCs that are managed as part of a domain. What we want is for the domain admin to be unable to view the PC's local drive (C:) unless he is physically at the PC. In other words, no remote desktop and no ability to use UNC. In other words, the domain admin should not be allowed to put \\user_pc\c$ in Windows Explorer and see all the files on that computer, unless he is physically present at the PC itself. Edit: to clarify some of the questions/comments that have come up. Yes, I am an admin---but a complete Windows novice. And yes, for the sake of this and my similar questions, it is fair to assume that I am working for someone who is paranoid. I understand the arguments about this being a "social problem versus a technical problem", and "you should be able to trust your admins", etc. But this is the situation in which I find myself. I'm basically new to Windows system administration, but am tasked with creating an environment that is secure by the company owner's definition---and this definition is clearly very different from what most people expect. In short, I understand that this is an unusual request. But I'm hoping there is enough expertise in the ServerFault community to point me in the right direction.

Read the article
Ubuntu 12.04 partioning an external drive without lossing data

- by Menelaos Perdikeas

I have an Ubuntu 12.04 with an external 1.5T disk (just for data). It is /dev/sdc1 seen below: $ df -T Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/sda1 ext4 1451144932 27722584 1350794536 3% / udev devtmpfs 6199460 4 6199456 1% /dev tmpfs tmpfs 2482692 988 2481704 1% /run none tmpfs 5120 0 5120 0% /run/lock none tmpfs 6206724 284 6206440 1% /run/shm /dev/sdc1 fuseblk 1465135100 172507664 1292627436 12% /media/Elements The thing is I would like to implement this rsync-based backup strategy and I want to use my /dev/sdc1 external drive for that. Since the guide mentioned above recommends placing the backup directory in a separate partition I want to repartition the /dev/sdc1 external hard disk but retain existing data in a separate partition. E.g. split /dev/sdc1 into two partitions: (i) one to be used exclusively for the rsync-based backup and (ii) the other for the existing miscellaneous data. How should I go about partitioning with minimal risk to my existing data and what kind of filesystem do you recommend? I would prefer a console-based guide but unfortunately all the material I found on the web is oriented towards partitioning the main (bootable) disk and not an external fuseblk filesystem used only for passive data.

Read the article
Adding more drives to a drive array

- by Mystere Man

I have a friend who has two servers, a Dell 1800 and an HP 350 ML G5, both have SAS drive arrays. The Dell is a 3.5" and the HP is a 2.5". They currently only have 3 drives in each array. We want to add additional drives, but they do not appear to have caddies, just "fake" covers. I haven't been able to take a good look at them, so I'm not sure what I need to do here. Are the "sockets" just there, and I can buy additional caddies and just stick them in? Or do I have to buy some kind of caddy adapter? Also, i'm thinking of just going 2.5" in the new server, so is there a 2.5" adapter caddy that will fit in the 3.5" chassis for the Dell, so I can use 2.5" drives in the 3.5" chassis? Can I buy 6GB/s drives and add them to the 3GB/s controller? The reason is that we're going to replace both computers in a year or so, and we want to bring the drives with. So rather than buy 3GB/s drives, we just want to buy 6GB/s drives so they can be used in the new server.

Read the article
Access to CD/DVD Drive is Denied through Windows 7 Explorer (Permission Problem)

- by Synetech inc.

A while ago I started having trouble with my optical drives. Both of them keep showing up in Explorer as CD/DVD drives on boot, but as soon as I put a disc in either one, it suddenly turns into a hard-drive—“local disk” is displayed in the Type column, though the File System column remains UDF/CDFS. (I though that maybe it was a permission issue on the registry key in HKLM\System\CurrentControlSet..., but I’m not so certain because of the next test.) When I try to open a disc (of any type), I get an access denied error message. If I open an elevated command-prompt, I am able to access the files. Also, if I kill Explorer and run it from an elevated command-prompt (thus giving Explorer elevated permissions), then I can access the files from Explorer. I’ve tried uninstalling and reinstalling the devices without success. The security dialog indicates that there are none set for the drives (no owner and no permissions). I tried setting the owner, but am only able to do so if there is a disc in it (it complains if it is empty), but the settings do not stick (if I immediately open the security dialog after setting it, it is empty again). I tried setting permissions, but that gives an error. I’ve included a screencap-flowchart of the security dialog of one of the drives below. (Yes, I made sure that there are no upper- or lower-filters, and yes, I ran sfc. I also made sure that in the policy editor, “devices: restrict CD-ROM...” is not set.) Does anyone know what the owner and permissions are supposed to be for optical drives and how to reset them?

Read the article
Cannot connect to a shared network drive

- by dublintech

I am using windows 7, I cannot connect to a shared network drive on another machine. I can ping the machine. I can remote desktop connect to the machine. The machine is on the same subnet My friend with the exact same laptop as me (and on the same network, same workgroup) can connect to the shared folder. The machine I am trying to connect to and my friends machine can both see shared folders on my machine. I also cannot see shared folders on the friends laptop. When I select diagnose, windows tells me nothing useful. When I select see details on the error pop up, I see: Error code: 0x80004005 (google doesn't help much) I can nbtstat -a the machine who has the shared folder. When I try with my firewall turned off the same happens. I have ensured my windows 7 has all updates. I run security essentials to ensure my laptop is clean. I run ccleaner to clean up my registry. Same error. I have tried with my laptop on both wireless and ethernet. As you can imagine, I am banging my head against the wall on this one.

Read the article
Programmatically controlled virtual drive

- by Robert Lin

How would I go about creating a virtual drive with which I can programmatically and dynamically change the contents? For instance, program A starts running and creates a virtual drive. When program B looks in the drive, it sees an error log and starts reading/processing it. In the middle of all this program A gets a signal from somewhere and decides to add to the log. I want program B to be unaware of the change and just keep on going. Program B should continue reading as if nothing happened. Program A would just report a rediculously large file size for the log and then fill it in as appropriate. Program A would fill the log with tags if program B tries to read past the last entry. I know this is a weird request but there's really no other way to do this... I basically can't rewrite program B so I need to fool it. How do I do this in windows? How about OSX?

Read the article
PC boot: dl register and drive number

- by kikou

I read somewhere in the internet that, before jumping to 0x7c00, the BIOS loads into %dl the "drive number" of the booted device. But what is this "drive number"? Each device attached to the computer is assigned a number by the BIOS? If so, how can I know which number is a given device assigned to? Reading GRUB's source code I found when %dl has bits 0x80 and 0x70 set, it overwrites the whole register with 0x80. Why is that? Here is the code: jmp 3f /* grub-setup may overwrite this jump */ testb $0x80, %dl jz 2f 3: /* Ignore %dl different from 0-0x0f and 0x80-0x8f. */ testb $0x70, %dl jz 1f 2: movb $0x80, %dl 1: By the way. Is there any detailed resource on the boot process of PC's in the web? Specially about what the BIOS does before giving the control to the bootloader and also the standard codes used to communicate with it (like that "drive numer"). I was hoping to write my own bootloader and everything I found is a bit too vague, not technical enough to the point of informing of the exact state of the computer when my bootloader starts to run.

Read the article
Mercurial on shared network drive?

- by user1164199

Right now I have my repo on my local drive. In order to back it up, I have to copy .hg to a window's network drive. At Is it a good idea to put Mercurial Repository in shared Network drive?, Lasse Karlsen said the repo shouldn't be on a shared folder on a network server because "mercurial cannot reliably hold locks in all situations". Would this still be an issue when the repository is only updated by a single user? If so, can someone explain to me why the corruption happens? A while back our IT had problem setting up a mercurial server. I am very fond of mercurial (it has a great interface and is very easy to work with), but if it's going to be such a pain in the neck to set up for multiple users, I am willing to look for something else. Does anyone have any suggestions (with reasons)? I am looking for a revision control program that has the following attributes: 2. Good interface (allow you to easily see revision and changes to the code over multiple revisions). 3. Work as a local repo or a network repo. 4. IT will feel comfortable installing on their network. Thanks, Stephen

Read the article
how mount userdata.img or userdata-qemu.img in osx

- by misbell

Disk Utility in OSX easily mounts an SD Card image as a device, but not so the other img files. I want to get the database I just created in the Android Emulator off the drive and into my osx file system. I updated my system with qemu using macports but no combination I try succeeds. Anyone figured out how to do this? Obviously one way I can do this is run the app on my phone than mount the phone as a USB drive. But I don't wanna. I wanna get it off the drive the emulator uses :-) Thanks in advance, folks. Michael

Read the article
Java portable media detection

- by quosoo

I would like to write a piece of java code that synchronizes files between local hard drive and a usb storage. I would like to have a different synchronization configuration depending on which usb storage is plugged in and I would like to have apropriate configuration to be selected automatically rather than chosen by the user. I've just read the JSR-80 and jUSB documentation as well as a bunch of articles and SO posts, but all of those are very old and it seems that since that time (around 2005) all the efforts have been abandoned especially for Windows platform, while the OS-independence is quite important to me (at least Windows and Linux need to be supported). Do I really need to use any of the USB APIs to recognize external drives that are connected to the system? I need something that is more unique than file path, drive letter or drive label... And if yes which one would you recommend (unless I missed something jUnit is actually the only for which Windows support exists).

Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105 | Next Page >