Search Results

Search found 13909 results on 557 pages for 'old man'.

Page 98/557 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• Raid 5 scsi fault

  - by HaLaBi

  I have no much knowledge about servers and I was looking all day around the internet about finding a solution to my raid 5 problem. All of a sudden two disks failed. The server won't boot (HP Proliant, windows 2003 R2, very old maybe 10 years old). I know that if one disk is faulty then I can add a new disk and rebuild it and things will be fine, the problem is two went faulty :( is this normal? two at the same time? is there any other thing I can do and I am not aware of? other than taking them out and reinserting them back? Windows won't boot. The Array menu shows that disks 0 and 4 are "Missing". Any other tricks or things to do? It is important because for some unknown reason the back up job did not work for a month and I just found out, so I need to make these raid 5 back online again.

  Read the article

• Import EML emails into Outlook 2010 64-bit

  - by nness

  Evening everyone. I'm helping setup a small office network, where a number of old PC's are being replaced with new ones with a 64-bit copy of Outlook 2010. The old emails were stored in Windows Live Email, and were exported as .eml files (since we were replacing the machines). All the support I can find indicates that .eml files could simply be dragged-and-dropped into a folder in Outlook 2010, and it will import them correctly. However, it seems this is not the case in the 64-bit versioin, where dropping in .eml files results in a new message being created with these files as attachments. We can re-download the most of the emails off the server if need be, but there were user folders which were not on the server which we were hoping to import. Any advice would be fantastic at this point!

  Read the article

• RedirectPermanent vs RewriteRule [R]

  - by notbrain

  I currently have a perm_redirects.conf file that gets included into my apache config stack where I have lines in the format RedirectPermanent /old/url/path /new/url/path It looks like I'm required to use an absolute URL for the new path, e.g.: http://example.com/new/url/path. In the logs I'm getting "incomplete redirect target /new/url/path was corrected to http://example.com/new/url/path." (paraphrased). In the 2.2 docs for RewriteRule, at the bottom they show the following as being a valid redirect, with only the url-paths instead of an abs URL for the right hand side of the redirect: RewriteRule ^/old/url/path(.*) /new/url/path$1 [R] But I can't seem to get that format to work to replicate the functionality of the RedirectPermanent version. Is this possible?

  Read the article

• Pointing a subdomain at a file

  - by Seva Alekseyev

  Switched hosting recently (Linux, CPanel, WHM). At the old host, there was a subdomain that had a file (instead of a directory) as a root. The file was a CGI script. The said subdomain was created via CPanel by me a while ago. At the new host, I'm trying to recreate this subdomain. And I get the following error: The directory, /home/(...)/cgi-bin/guest.cgi could not be created. Is there a tweak somewhere that enables this functionality? EDIT: tried to repeat the trick on the old site, and I could not. CPanel update broke it, maybe?

  Read the article

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• SCCM 2012: How to properly update the content of an application?

  - by Omnomnomnom

  I recently set up a new SCCM 2012 environment at my workplace and now we are creating our applications for distribution. Some applications are set up using a script. When during testing, something was not right and the content of the application needs to be changed. The distribution point keeps on serving the old content to the clients. I was wondering what the proper procedure is for updating the DP's when the content of an application changes. I have tried redistributing to the distribution points and deleting old revisions but to no avail.

  Read the article

• How to share datastores between multiple exchange servers?

  - by Johan

  I have an Exchange 2003 box that is seriously overstressed. I want to transfer its duties to a new and faster box. I don't cannot suffer downtime, so I have to do this stuff live. Here's what I plan to do: Install Exchange 2003 on the new server Set up the new server, so it will accept requests from users for their mailboxes I want to do as little manual set up as possible, because that 'll eat up my time and is too error prone Than I want to transfer my datastores one by one to the new server and have those users (once the datastore in the new server is up and running) to get their data from the new server (without them noticing) I don't have to transfer all the datastores, some of them need to stay on the old box (because I'm still waiting for extra HD space to arrive from the supplier) What steps do I need to follow to do this? The new box has never seen this domain before, the old exchange server is not the DC, we have a dedicated DC.

  Read the article

• Password History Storage and Variability Comparison

  - by z3ke

  I believe this situation would be similar to many others out there, so maybe some of you can shed some light... Supposedly, when making password changes through MS exchange every 90 days, you cannot use any simple variation of one of your old passwords, up to whatever limit the admin's set for a system. My question: If your previous passwords are only stored as hashes, how can they check for the "just changed one letter" case. Wouldn't they have to have access to the old plain-text passwords in order to make those comparisons? The only other thing I can think of is if upon original creation of a password, they also stored all other one character permutations of it, so that they can be banned later?

  Read the article

• Is there a Utility that will scan selected locations and return all files older than a certain date?

  - by CT

  Can anyone recommend a utility that can scan specified directory locations (network shares specifically) and return all files older than a certain date? I am looking to implement a data retention policy at my workplace. As our amount of data grows it puts a large strain on our backup routines. I would like to move old data to some sort of archival system. Extra points for the ability to move queried old files to another location for archival and the ability to create schedules for when this occurs. Many thanks. EDIT: Windows Shop. Mostly Windows 2003 Servers.

  Read the article

• Would a switch be covered by a router's firewall

  - by Uh-yeah...

  So... Hopefully; this is the right place for this question. I need more Ethernet ports on my home network. Sadly, we already have an old router connected to the main router and we still need more ports. I feel dumb for asking; but, I just would like to double check. Would the devices connected to the switch be "protected" by the Main router's firewall? ? Up to this point I have assumed that was the case; but, a co-worker is convinced that is not the case [ I believe he is thinking of a situation in which the switch (un-managed) is before an access point]. [It would go modem to main router; main router then has the switch and old router connected to it.

  Read the article

• Apache redirect some requests to another server

  - by mucie

  We just bought a new server. We want our old server to respond the https connections(because of ssl certificate) and new server to respond the rest. New server is ready but i don't know how to redirect requests to new one. mydomain.com => old machine ip 10.10.10.41 => new machine Requests will come through mydomain.com. If it is https: respond else redirect to 10.10.10.41 How should i configure apache for this situation?

  Read the article

• Blurred refurbished TFT

  - by PeterMmm

  I got 3 refurbished PC+TFT 19". All TFT shows a very blurry image. I estimate the TFT's are 2-3 yrs old. The PC's running Windows7 Pro. The resolution is set to the TFT native values. It could be possible that all TFT's are broken but I have similiar models that are up to 5 yrs old, without any issue. I still think it could be a config issue but from the hardware it is possible that a TFT get broken I shows up a very blurry image. Update TFT HP 2035, grafic Intel Q35/GMA 3100, analog D-SUB connector, Manuf. date Sep 2005. Config. resolution 1600x1200, PPP 150% Without ClearType it is worst. Desktop Icon titles seems to be good and clear. But in Notepad for example the effect is that on the right of the characters is a pinky shadow.

  Read the article

• Web application access different between Domain Name and IP

  - by h82

  in our office, we have a web application running. When we access the application by the domain name, http://server.domain.com/application/name it will display the current version of application. However, when we go by the IP address, http://192.168.1.111/application/name it will display the old version of that application. One thing is that we can access that application either by http://server.domain.com/ (it will be redirected to the long URL automatically) or http://server.domain.com/application/name when we are using domain name. But only accessible via the exact URL when we use IP address. Why is it showing the old version and how can it be corrected? It is running JRun4, Apache on Red hat. I've checked in httpd.conf a bit but could not find any. Please advice what should be done to display the same (updated version) when we access using domain name or IP address. Thank you.

  Read the article

• How to change the clients and "My Documents" from a SBS2003 server to a new SBS2008 server?

  - by Sanoj

  Today we have a small network with 5 clients and a Windows SBS 2003 as a server. Now have we bought a new server with Windows SBS 2008. How do I easiest: Switch the clients working with the old server, to work with the new server? Is it just to run http://domain/connectcomputer again? Move the data in "My Documents" from the old server to the new server? And finally, is there anything other that I have to think of when changing server? It will be a new clean installation.

  Read the article

• Transfer disk image to larger/smaller disk

  - by forthrin

  I need to switch the hard drive on a 2006 iMac to a new SSD. I don't have the original installation CDs. I know I can order CDs from Apple, but this costs money. Someone told me it's possible to rip the image of the old drive and transfer to the new drive. If so, does the size of the new drive have to be exactly the same as the old? If not, my questions are: Is it possible to "stretch" the image from 120 MB disk to a 256 MB disk (numbers are examples)? If so, what is the command line for this? Likewise, is it possible to "shrink" an image from a larger disk (eg. 256 MB) to a smaller disk (eg. 120 MB), provided that the actual space used on the disk does not exceed 120 MB? How do you do this on the command line?

  Read the article

• Why can't I change the icon being displayed for a desktop shortcut?

  - by Bill

  I wanted to change the icon showing for a shortcut on the desktop, which points to a .Net utility I created for myself. I rebuilt the exe after changing the icon used within the project. In Windows Explorer the new icon shows in all size variations for the exe. In the 'Change Icon' dialog from the Properties option, the correct icon is showing as present, yet when I Apply it remains with the old icon??? Even when I delete the shortcut and create a new one pointing to the newly built exe the old icon somehow is assigned???

  Read the article

• SQL Express 2008 R2 on Amazon EC2 instance: tons of free memory, poor performance

  - by gravyface

  The old SQL Express 2005 was running on a low-end single Xeon CPU Dell server, RAID 5 7200 disks, 2 GB RAM (SBS 2003). I have not done any baseline measurements on the old physical server, but the Web app is used by half a dozen people (maybe 2 concurrently), so I figured "how bad can an Amazon EC2 instance be?". It's pretty horrible: a difference of 8 seconds of load time on one screen. First of all, I'm not a SQL guru, but here's what I've tried: Had a Small Instance, now running a c1.medium (High Cpu Medium) Windows 2008 32-bit R2 EBS-backed instance running IIS 7.5 and SQL Express 2008 R2. No noticeable improvement. Changed Page File from fixed 256 to Automatic. Setup a Striped Mirror from within Disk Management with two attached 1 GB EBS volumes. Moved database and transaction log, left everything else on the boot EBS volume. No noticeable change. Looked at memory, ~1000 MB of physical memory free (1.7 GB total). Changed SQL instance to use a minimum of 1024 RAM; restarted server, no change in memory usage. SQL still only using ~28MB of RAM(!). So I'm thinking: this database is tiny (28MB), why isn't the whole thing cached in RAM? Surely that would speed up performance. The transaction log is 241 MB. Seems kind of large in comparison -- has this not been committed? Is it a cause of performance degradation? I recall something about Recovery Models and log sizes somewhere in my travels, but not positive. Another thing: the old server was running SQL Express 2005. Not sure if that has any impact, but I tried changing the compatibility level from SQL 2000 to 2008, but that had no effect. Anyways, what else can I try here? Seems ridiculous to throw more virtual hardware at this thing. I know I/O is going to be rough on EBS volumes, but surely others are successfully running small .NET/SQL apps on reasonably priced instances?

  Read the article

• How to "get" a reliable parallel port on a laptop without a PCMCIA slot?

  - by ldigas

  Usb-Parallel port (for an old, but reliable matrix printer that has its special use) connections (cables) are unreliable. They sometimes work, sometimes don't - and since I installed Windows 7 I can't get neither of my old ones to work properly. PCMCIA is usually considered (and it is) a much more reliable solution, but unfortunatelly, none of my new laptops has a PCMCIA slot. So, all ideas are welcomed. What should I do? I'm open to all suggestions as long as you have some experience that they work more reliably than USB-Parallel cables and their wicked drivers.

  Read the article

• TrueCrypt partition will no longer mount

  - by sparkyuiop

  I am hoping for some advice to help me out of my situation, with luck. I have a computer running Windows 7 Ultimate x64 with 3 hard disks installed. On my 2TB hard disk 2 (non-system disk) I have 4 partitions. One is for music, another for video, a downloads partition and a 500GB RAW Truecrypt encrypted partition / volume that I had setup to mount with 4 photographs used as keyfiles. The 4 photographs are located in my 'Documents' partition which is one of four partitions on my 1.5TB hard disk 1 (non-system disk) When I setup the disk encryption I did not (I'm 99% sure) create a password, I only used the 4 photograph keyfiles to mount the volume. Recently my 1TB hard disk 0 (system / boot) started to fail so I decided to replace it. I was going to clone the old disk to a new disk but decided that a fresh installation would be more beneficial. Once I had transferred all the required 'User Data' from my old hard disk 0 (C: disk) I discarded it. I reinstalled Truecrypt, pointed to the partition, selected my 4 keyfiles photographs and I mounted my encrypted volume with no issues. In fact I mounted it several times after re-installing Windows and after reboots. Now all of a sudden when I try and mount it I get the message "incorrect keyfile(s) and/or password or not a Truecrypt volume". Now I am not sure why this happened as I do not recall exactly what I did between last mounting the volume successfully and it not mounting. Here are some of the possible things I may have done to cause it to stop working but I am at a loss as to where to start to try and resolve the problem. 1. I had swapped the drive letters to a preferred order. 2. I possibly swapped the physical SATA connectors on the mainboard. 3. I enabled 'Hot Plugging' for the two non-system hard disk SATA ports and the DVD SATA port in the BIOS. I have tried changing the encrypted partition drive letter as suggested in another post but this does not help. On my old system the encrypted drive was drive "X". I have about tried it with all the other free drive letters but alas nothing changes. I do not recall what drive letter was allocated to the encrypted partition before I changed them all. I have not tried to change the letter back to what it possibly was to start with as I am happy with the current layout. I will try this is anyone thinks it would be worthwhile though. I do hope I have managed to convey my situation in an understandable manner and live in hope someone could help me recover years of personal files. Thank you very much for taking the time to read my post and for any suggestions you may offer. Regards Phillip Thorne (UK) Anyone???

  Read the article

• Thunderbird 3.0 - how to prevent new message indicator from clearing?

  - by Joe Casadonte

  I just installed Thunderbird 3.0 and there are a few things driving me batty. When new email is delivered it has a faint star to the left of the subject (this is different than the new star column thing). In the old days (i.e. last week) the new message indicator wouldn't go away until I read the message or left the folder and returned. Now, as soon as I do anything with any email message, all new message indicators are cleared. How can I go back to the old behavior?

  Read the article

• one domain name, two servers

  - by MarcoKotrotsos

  Goodmorning. Because my client wants to keep an old server (running php-fusion) running under the same domain name as a new server (running Drupal) I have a question. Is this possible? And most importantly how would I do this?? The old server URL structure is like projectname.domain.com and the new server's URL structure is domain.com/projectname. Is this possible? To run these two servers side by side, on the same domain name- but with a different URL structure? Thank you Marco

  Read the article

• Setting primary IP for VPS (out of 2 available)

  - by Flyer

  I've got a little problem. My VPS (Debian box) has 1 primary IP address, but now my hosting provider decided to assign me another one due to problems with first one. Let's say new IP is 91.222.152.20 and old one 91.221.190.170. How should I make 91.222.152.20 primary one, so that everything works on this address instead of 91.221.190.170 (like ftp, mysql etc) I tried editing /etc/newtwork/interfaces setting iface eth1 inet static address 91.222.152.20 netmask 255.255.252.0 network 91.222.152.0 broadcast 91.222.155.255 gateway 91.222.152.1 I know that network is 91.222.152.0/22 so I assume that above configuration should be right. Saved, rebooted and that ended pretty bad. Couldn't even ping box on old or new IP. Had to revert to working one. So question is. What am I doing wrong and how to do it right?

  Read the article

• Cloned Windows 7 to new HDD and want to change the drive letter to C

  - by Hoppe

  I used Clonezilla to clone my existing hard drive to a new one I bought. I then changed the BIOS to set the new drive as the first in the boot sequence. I'm pretty sure that I'm still running Windows 7 on the old drive. My old drive is marked as C. Now that I don't have a disk drive any more, how I do I swap the drive letter from J: to C:? I tried to change it in the disk management section of "Manage", but it reports: "the parameter is incorrect".

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >