Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 99/1036 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

• C string question

  - by user208454

  I am writing a simple c program which reverses a string, taking the string from argv[1]. Here is the code: #include <stdio.h> #include <stdlib.h> #include <string.h> char* flip_string(char *string){ int i = strlen(string); int j = 0; // Doesn't really matter all I wanted was the same size string for temp. char* temp = string; puts("This is the original string"); puts(string); puts("This is the \"temp\" string"); puts(temp); for(i; i>=0; i--){ temp[j] = string[i] if (j <= strlen(string)) { j++; } } return(temp); } int main(int argc, char *argv[]){ puts(flip_string(argv[1])); printf("This is the end of the program\n"); } That's basically it, the program compiles and everything but does not return the temp string in the end (just blank space). In the beginning it prints temp fine when its equal to string. Furthermore if I do a character by character printf of temp in the for loop the correct temp string in printed i.e. string - reversed. just when I try to print it to standard out (after the for loop/ or in the main) nothing happens only blank space is printed.

  Read the article

• Hardening network with sysctl settings made Wi-fi downloading speed extremely slow

  - by Rohit Bansal

  I just followed up following steps to harden network security The /etc/sysctl.conf file contain all the sysctl settings. Prevent source routing of incoming packets and log malformed IP's enter the following in a terminal window: sudo vi /etc/sysctl.conf Edit the `/etc/sysctl.conf` file and un-comment or add the following lines : # IP Spoofing protection net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Ignore ICMP broadcast requests net.ipv4.icmp_echo_ignore_broadcasts = 1 # Disable source packet routing net.ipv4.conf.all.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv6.conf.default.accept_source_route = 0 # Ignore send redirects net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 # Block SYN attacks net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_max_syn_backlog = 2048 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syn_retries = 5 # Log Martians net.ipv4.conf.all.log_martians = 1 net.ipv4.icmp_ignore_bogus_error_responses = 1 # Ignore ICMP redirects net.ipv4.conf.all.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv6.conf.default.accept_redirects = 0 # Ignore Directed pings net.ipv4.icmp_echo_ignore_all = 1 To reload sysctl with the latest changes, enter: sudo sysctl -p But, after applying the changes I found "Wi-fi" downloading speed and terminal downloading speed extremely slow (less than 1KB/s) however surfing speed through browser was good. But, using direct ethernet cable was giving a good speed. Then, I reverted back the above changes and things fall back in line once again.... Could you please let me know what possibly in above script is affecting such behaviour [and why] ? How could I still maintain hardening of network security without disturbing Wi-fi downloading speed ?

  Read the article

• QJackCtl - Alsa Unknown driver

  - by user69458

  Here's my problem : I just have installed QJackCtl on my Ubuntu 12.04 and when I start Jack I got this issue : 12:01:22.769 /usr/local/bin/jackd -dalsa -dhw:0 -r44100 -p1024 -n3 -i1 -o2 Cannot connect to server socket err = Aucun fichier ou dossier de ce type Cannot connect to server socket jack server is not running or cannot be started Unknown driver "alsa" If anyone knows the solution It would help me a lot !

  Read the article

• Can't shrink Windows Boot NTFS disk: ERROR(5): Could not map attribute 0x80 in inode, Input/output error

  - by arcyqwerty

  Ubuntu 12.04 LTS, all updates current as of 7/3/2012 gksudo gparted Shrink /dev/sda2 from 367GB to 307GB GParted 0.11.0 --enable-libparted-dmraid Libparted 2.3 Shrink /dev/sda2 from 367.00 GiB to 307.00 GiB 00:32:57 ( ERROR ) calibrate /dev/sda2 00:00:00 ( SUCCESS ) path: /dev/sda2 start: 20,484,096 end: 790,142,975 size: 769,658,880 (367.00 GiB) check file system on /dev/sda2 for errors and (if possible) fix them 00:00:53 ( SUCCESS ) ntfsresize -P -i -f -v /dev/sda2 ntfsresize v2012.1.15AR.1 (libntfs-3g) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 394065338880 bytes (394066 MB) Current device size: 394065346560 bytes (394066 MB) Checking for bad sectors ... Checking filesystem consistency ... Accounting clusters ... Space in use : 327950 MB (83.2%) Collecting resizing constraints ... Estimating smallest shrunken size supported ... File feature Last used at By inode $MFT : 389998 MB 0 Multi-Record : 394061 MB 386464 $MFTMirr : 314823 MB 1 Compressed : 394064 MB 1019521 Sparse : 330887 MB 752454 Ordinary : 393297 MB 706060 You might resize at 327949758464 bytes or 327950 MB (freeing 66116 MB). Please make a test run using both the -n and -s options before real resizing! shrink file system 00:32:04 ( ERROR ) run simulation 00:32:04 ( ERROR ) ntfsresize -P --force --force /dev/sda2 -s 329640837119 --no-action ntfsresize v2012.1.15AR.1 (libntfs-3g) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 394065338880 bytes (394066 MB) Current device size: 394065346560 bytes (394066 MB) New volume size : 329640829440 bytes (329641 MB) Checking filesystem consistency ... Accounting clusters ... Space in use : 327950 MB (83.2%) Collecting resizing constraints ... Needed relocations : 13300525 (54479 MB) Schedule chkdsk for NTFS consistency check at Windows boot time ... Resetting $LogFile ... (this might take a while) Relocating needed data ... Updating $BadClust file ... Updating $Bitmap file ... ERROR(5): Could not map attribute 0x80 in inode 1667593: Input/output error ======================================== Windows has run chkdsk successfully (on boot) several times now

  Read the article

• Do dconf use EXI binary XML?

  - by Hibou57

  A question came to my mind reading an answer to the question What are the differences between gconf and dconf?. In an reply to the above question, Oli said: Binary read access is far faster than parsing XML. However, there exist a W3C recommendation for binary XML, since 2010: Efficient XML Interchange (EXI) Format 1.0. Is this what dconf uses? If Yes, where is it confirmed? If No, was there some investigations toward it at some time, and what was the conclusions? Thanks for any tracks, I'm curious to know.

  Read the article

• Reformating xml document

  - by Joseph Reeves

  I have an xml document in the format below: <key>value</key> <key>value</key> <key>value</key> But need to convert it to the following: <tag k='key' v='value' /> <tag k='key' v='value' /> <tag k='key' v='value' /> The original xml file is roughly 20,000 lines long, so I'm keen to automate as much as possible! I've looked at xmlstarlet, but drew a blank with it. Presumably it would be a good place to start though? Help gratefully received, thanks.

  Read the article

• Files are piling up in /usr/src/. How can I stop this?

  - by Bogdanovist

  I have been having many serious system issues over the past few weeks and have been scratching my head as to why. I've now worked out that this problem is having no inodes left on the root partition $ df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda6 732960 724565 8395 99% / udev 125179 518 124661 1% /dev tmpfs 127001 464 126537 1% /run none 127001 4 126997 1% /run/lock none 127001 8 126993 1% /run/shm /dev/sda7 5234688 144639 5090049 3% /home What is the cause? I've found that 400K of those are in use in /usr/src $ ls /usr/src linux-headers-3.2.0-25-generic linux-headers-3.2.0-33 linux-headers-3.2.0-25-generic-pae linux-headers-3.2.0-33-generic linux-headers-3.2.0-26 linux-headers-3.2.0-33-generic-pae linux-headers-3.2.0-26-generic linux-headers-3.2.0-35 linux-headers-3.2.0-26-generic-pae linux-headers-3.2.0-35-generic linux-headers-3.2.0-27 linux-headers-3.2.0-35-generic-pae linux-headers-3.2.0-27-generic linux-headers-3.2.0-36 linux-headers-3.2.0-27-generic-pae linux-headers-3.2.0-36-generic linux-headers-3.2.0-29 linux-headers-3.2.0-36-generic-pae linux-headers-3.2.0-29-generic linux-headers-3.2.0-39 linux-headers-3.2.0-29-generic-pae linux-headers-3.2.0-39-generic linux-headers-3.2.0-30 linux-headers-3.2.0-39-generic-pae linux-headers-3.2.0-30-generic linux-headers-3.2.0-40 linux-headers-3.2.0-30-generic-pae linux-headers-3.2.0-40-generic linux-headers-3.2.0-31 linux-headers-3.2.0-40-generic-pae linux-headers-3.2.0-31-generic linux-headers-3.2.0-41 linux-headers-3.2.0-31-generic-pae linux-headers-3.2.0-41-generic linux-headers-3.2.0-32 linux-headers-3.2.0-41-generic-pae linux-headers-3.2.0-32-generic linux-headers-3.2.0-43 linux-headers-3.2.0-32-generic-pae Surely not all of these are actually needed? I've tried apt-get autoremove but it leaves them all be. I don't want to remove them manually, but this is crippling my machine. They also take up almost 2G of the 11G system partition that is getting full (80%) aside from the inode issue. How can I safely remove the headers that are not needed?

  Read the article

• AMD/AMD GPU Switching

  - by user73816

  I have two GPU's in my laptop, both of which are AMD. Whenever I use the Catalyst Control Centre to change the GPU, nothing changes after reboot. In fact, when I do the fglrxinfo command the terminal only reports seeing one GPU, the integrated one (HD 4250). The dedicated one (Mobility HD5470) goes unnoticed and I can't seem to use that GPU at all. I really don't want to use the Open Source drivers because I've found there generally slower than the proprietary, but the proprietary doesn't seem to work either. Any help is appreciated.

  Read the article

• How can I automatically change the system keyboard layout when plugging in an external keyboard?

  - by Andrew Bolster

  I have a US-Style laptop, which is fine, but I also have a UK-style Ergonomic USB keyboard. As such I usually have the US key layout set, but when I settle in at my desk and use the UK USB keyboard I find myself making stupid mistakes on symbols (normally a pretty good touch typist on either ergo or standard kbd). Can anyone think of a clean way of setting the keyboard layout based on the inferred layout/USBID of any plugged in Keyboard? Even having a custom setting such as adding a specific USB ID to a runtime script that checks if its plugged in or not. Can this be done without the user having to logout/in? I remember doing something similar with xorg.conf, but that required logout.

  Read the article

• Built-in network card not working?

  - by Zeeshan

  Hi, I am new to Ubuntu. I have installed Ubuntu 9.04(Jaunty). After installation I found that network card is not wokring. And id doest not list in "System Preferenes Network Connections" So , i got another card from my friend and try to search on internat about my problem but still cant find solution. Some commands output is here which may be help to solve problem root@mzeeshan-desktop:/home/mzeeshan# uname -r 2.6.28-11-generic root@mzeeshan-desktop:/home/mzeeshan# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:02:44:4a:45:12 inet addr:192.168.5.37 Bcast:192.168.5.255 Mask:255.255.255.0 inet6 addr: fe80::202:44ff:fe4a:4512/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3774 errors:0 dropped:0 overruns:0 frame:0 TX packets:3611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4307045 (4.3 MB) TX bytes:583067 (583.0 KB) Interrupt:22 Base address:0x1000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) pan0 Link encap:Ethernet HWaddr 5e:25:17:a1:18:ac BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@mzeeshan-desktop:/home/mzeeshan# lspci 00:00.0 Host bridge: Intel Corporation Device 0069 (rev 12) 00:01.0 PCI bridge: Intel Corporation Auburndale/Havendale PCI Express x16 Root Port (rev 12) 00:19.0 Ethernet controller: Intel Corporation Device 10f0 (rev 05) 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) 00:1c.6 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 7 (rev 05) 00:1c.7 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 8 (rev 05) 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) 06:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 06:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07) 06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) root@mzeeshan-desktop:/home/mzeeshan# Motherboard is Intel DP55WG. I don't know what to do next. Any help will be greatly appreciated.. Thanks

  Read the article

• Can mediatomb VLC profile transcode audio as MP3 rather than mpga ?

  - by djangofan

  In the /etc/mediatomb/config.xml, can mediatomb VLC profile transcode audo as MP3 rather than mpga ? My Sony GoogleTV wont render streamed .avi files files with a mpga audio in them. The original files are Divx encoded with 128kbs MP3 audio but mediatomb is transcoding them. How can I change this? Any ideas? Can I turn off the audio and video transcoding somehow? I need some ideas to try. <profile name="vlcprof" enabled="yes" type="external"> <mimetype>video/mpeg</mimetype> <agent command="vlc" arguments="-I dummy %in --sout #transcode{venc=ffmpeg,vcodec=mp2v,vb=4096,fps=25,aenc=ffmpeg,acodec=mpga,ab=192,samplerate=44100,channels=2}:standard{access=file,mux=ps,dst=%out} vlc:quit"/> <buffer size="10485760" chunk-size="131072" fill-size="2621440"/> <accept-url>yes</accept-url> <first-resource>yes</first-resource> </profile> I know that that MP3 encoding support is external to FFmpeg and must be configured appropriately, but I have no idea how to handle that. I would guess I can work around that by somehow telling ffmpeg to not transcode the audio stream? Also, should I create a separate vlcprof entry for video/avi ? Can you create more than one profile for VLC in the config.xml for mediatomb?

  Read the article

• How can fix HDMI HDTV overscan when I my TV has no aspect ratio setting?

  - by Colin Dean

  I have a 32" Vizio HDTV. It's a few years old, but running well. I just connected a new nettop to it using HDMI out. It's the Intel 3x00 graphics chipset. I'm seeing overscan, where the resolution in Ubuntu is set to 1280x720, but the TV itself is 1366x768. When I go into the Monitors control applet, I cannot change the resolution to anything other than the current or 640x480. A user had a similar overscan problem, but fixed the overscan by adjusting his TV's aspect ratio settings. I do not have that luxury. Is there a way I can do this without having to delve into xorg.conf or other command-line craziness? I'm more than comfortable doing so, but there must be a cleaner way. I'm running Ubuntu Natty, keeping up with updates and such. Here's the output of lspci: colin@bricktop:~$ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) 00:04.0 Signal processing controller: Intel Corporation Core Processor Thermal Management Controller (rev 12) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• Unable to install updates on 14.04 LTS

  - by Mike

  I have been getting update notifications for a few weeks now but whenever I attempt to install them I get this message; The upgrade needs a total of 74.6 M free space on disk '/boot'. Please free at least an additional 29.8 M of disk space on '/boot'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean'. First of all I don't have permission to access /boot (don't know why as its a standalone machine and i'm the only user). Secondly, I emptied the trash; Thirdly, I launched Terminal and entered sudo apt-get clean I was a asked for a sudo password. I entered my system password. Re-entered sudo apt-get clean. The cursor stopped blinking - I assumed it was doing it's "thing". I let it go for about 10 minutes then exited Terminal. Tried to install the updates but just got the same message. Is there something i'm ignorant of? This is the output I get from the command df -h and I have no idea what it all means! @Tim, What's bash and why am I denied access to fstab and /boot? mike@mike-MS-7800:~$ /etc/fstab bash: /etc/fstab: Permission denied mike@mike-MS-7800:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu--vg-root 913G 11G 856G 2% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 1.7G 4.0K 1.7G 1% /dev tmpfs 335M 1.6M 333M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 1.7G 14M 1.7G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sda2 237M 182M 43M 81% /boot /dev/sda1 487M 3.4M 483M 1% /boot/efi /dev/sr1 31M 31M 0 100% /media/mike/Optus Mobile mike@mike-MS-7800:~$ I ran this from the terminal and all is now working. dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' | xargs sudo apt-get -y purge

  Read the article

• Internet suddenly stopped working

  - by user95629

  I was using NoMachine to access Ubuntu 11.10 when suddenly the internet on Ubuntu stopped working. Now Ubuntu doesn't recognize the internet at all (including locally). Symptoms: Doesn't recognize the fact that there is an ethernet cable attached. (I've tried switching cables, didn't work.) GUI says "No network devices available" Can't ping external IP addresses. Tried changing /etc/network/interfaces to eth1 instead of eth0 but it didn't work. ifconfig provides no output relating to eth0. When I type "/etc/init.d/networking restart" it tells me "Cannot find device 'eth0'/Failed to bring up eth0." The network settings had used a static IP address prior to the crash. I don't know why it won't recognize the ethernet (I think this is the fundamental problem, but I might be wrong) and why it stopped working so suddenly--I haven't installed any updates lately. Any ideas? Any more information I should provide? EDIT: lspci recognizes the Ethernet controller; netstat does not. lspci calls it "Intel Corporation Device 0000"

  Read the article

• resolv.conf doesn't get set on reboot when networking is configured for static ip

  - by kenneth koontz

  I'm experiencing, what appears to be a hostname resolution issue in ubuntu 12.04 server edition when configuring my computer to use a static ip. In /etc/network/interfaces: # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.28 netmask 255.255.255.0 gateway 192.168.1.1 Running $ sudo apt-get upgrade, results in a 'Failed to fetch...': . . . W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en_US Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) E: Some index files failed to download. They have been ignored, or old ones used instead. When I change my /etc/network/interfaces to: auto eth0 iface eth0 inet dhcp Everything works fine. Looking into /etc/resolv.conf provides some more hints...In cases where I was getting the resolving issue, resolve.conf was empty. No nameservers were specified. When I changed to dhcp from static and restarted networking. /etc/resolv.conf gets written to: 'nameserver 192.168.1.1'. Switching back from dhcp to static and restarting doesn't remove the nameserve entry. When I restart the system with static set, resolv.conf is empty. When I restart the system with dhcp set, resolv.conf has nameserver 192.168.1.1. So it appears that the issue is that resolve.conf is not getting written to correctly? Which package/code is responsible for writing to resolv.conf? Is there a particular package that I can take a look at open issues? UPDATE: istream posted a good article discussing changes to resolve.conf in 12.04. http://www.stgraber.org/2012/02/24/dns-in-ubuntu-12-04/

  Read the article

• Restoring an Ubuntu Server using ZFS RAIDZ for data

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own Home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and ZFS (OS on 1 Ext4 disk, Data on 3 RAIDZ disks). As Joel Spolsky and Geoff Atwood say with regards to backup, I can't rest until I have done a restore in all of the failure scenarios that I am seeking to protect against. Q: How to configure Ubuntu Server to recognise a pre-existing RAIDZ array? Clearly if one of the data disks die - then that is a resilvering scenario, which is well documented. If two of the data disks die, then I am into regular backup/restore land. If the OS dies and I can restore, also an easy scenario. But if the OS dies and I can't restore, then I need to recreate an Ubuntu server. But how do I get this to recognise my RAID-Z array? Is the necessary configuration information stored within and across the RAIZ array and simply need to be found (if so, how)? Or does it reside on the OS ext4 disk (in which case how do I recreate it)?

  Read the article

• Autostart app with proper icon in unity launcher

  - by kyleN

  One can autostart an application such that it launches on session start with an xdg desktop file in ~/.config/autostart (or /etc/xdg/autostart). But my application (a python/gtk/webkit/html5 app) when autostarted has a unity (and a unity-2d) launcher icon that is a gray question mark, even though: when I find it in dash, the dash shows the icon I specify in my main desktop file (in /usr/share/applications) when I launch it from dash, the launcher shows the icon I specify in my main desktop file when I add it as a favorite, the launcher shows the proper icon There are two cases where I get the gray question mark icon: autostart launch from terminal (this use case is not essential though and doesn't involve the desktop file anyway: but should/does ubuntu have an xdg desktop file interpreter à la #!/usr/bin/desktop or something) So: what is needed such unity (3d/2d) launcher panel shows the icon specified in an autostart desktop file?

  Read the article

• Solarized Theme in Terminal Vim on Xubuntu

  - by Dave Long

  I recently setup my laptop with Xubuntu 13.04 and after installing and setting up all my dotfiles, which have previously worked fine with Ubuntu 13.04 with XFCE installed, my colorscheme in Vim is using the wrong colors. I dropped the terminalrc file from the Solarized repository in ~/.config/xfce4/terminal/terminalrc and setup my dotfiles (which can be found at http://github.com/davejlong/dotfiles). Here is a screen shot of my Temrinal when I open a file in Vim: Here is the contents of ~/.config/xfce4/terminal/terminalrc: [Configuration] ColorCursor=#0f0f49499999 ColorForeground=#838394949696 ColorBackground=#00002b2b3636 ColorPalette1=#070736364242 ColorPalette2=#dcdc32322f2f ColorPalette3=#858599990000 ColorPalette4=#b5b589890000 ColorPalette5=#26268b8bd2d2 ColorPalette6=#d3d336368282 ColorPalette7=#2a2aa1a19898 ColorPalette8=#eeeee8e8d5d5 ColorPalette9=#00002b2b3636 ColorPalette10=#cbcb4b4b1616 ColorPalette11=#58586e6e7575 ColorPalette12=#65657b7b8383 ColorPalette13=#838394949696 ColorPalette14=#6c6c7171c4c4 ColorPalette15=#9393a1a1a1a1 ColorPalette16=#fdfdf6f6e3e3 Term=xterm-256color FontName=Inconsolata Medium 12 MiscAlwaysShowTabs=FALSE MiscBell=FALSE MiscBordersDefault=TRUE MiscCursorBlinks=FALSE MiscCursorShape=TERMINAL_CURSOR_SHAPE_BLOCK MiscDefaultGeometry=80x24 MiscInheritGeometry=FALSE MiscMenubarDefault=TRUE MiscMouseAutohide=FALSE MiscToolbarDefault=FALSE MiscConfirmClose=TRUE MiscCycleTabs=TRUE MiscTabCloseButtons=TRUE MiscTabCloseMiddleClick=TRUE MiscTabPosition=GTK_POS_TOP MiscHighlightUrls=TRUE MiscScrollAlternateScreen=TRUE

  Read the article

• How to Upgrade Oracle JDK and remove old JDK settings

  - by obysr

  i searched and not found how to upgrade oracle jdk in here. I'm not satisfied with OpenJDK7 because it doesn't come with Java Compiler. I has installed and configured Sun Java SDK 6 and i want to upgrade to Oracle JDK 7. I searched ppas from launchpad an wubp8 but it didn't work. How should I do to upgrade Sun JDK 6 to Oracle JDK 7 and also clearly remove all Sun JDK 6 settings? I'm very grateful for your answers. Sorry for my english

  Read the article

• Ubuntu Studio Audio Issue with Alsa - No sound

  - by ddragon

  Spec: OS: Ubuntu Studio 13.10 64bit CPU: AMD FX 4100 Quad Core Memory: 6GB DDR3 Video: Radeon HD 4250 (embedded on the mobo) Sound: Delta 66 PCI Issue: I just installed Ubuntu Studio and found out that the streaming audio on a few common website such as Youtube had no sound, and also my CD/DVDs via a player. Thus, in the terminal, I entered: sudo alsa force-reload It actually worked but the sound/audio output was MONO and NOT Stereo (the sources are set to stereo stereo), and it seemed I was not able to locate any settings that can switch the output sound to stereo at all. I went through many forums and eventually "autoremove" pulseaudio since many said I would not be able to utilize both pulseaudio and alsa in this case. Now, I have no audio whatsoever. Does this version of Ubuntu only offer mono sound/audio no matter what I do? Then, I may just need to ditch the whole thing and go back to Windows, which I don't want to since Ubuntu Studio offers many great apps, soundfonts etc.. I have also installed restricted extra, but even after rebooting, it did not resolve the issue. In the terminal mode, I pulled "alsamixer" and unmuted almost everything. But still no sound after a reboot. Just an FYI, I have no saved data under this version of Ubuntu Studio yet, so please feel free to let me know whether I need to install Studio 12.10 instead or mess with some installing/uninstalling apps/plug-ins, etc... If it breaks at some point, all I need to do is to re-install it, which I do not mind at all. Or, if you can provide me a step by step instruction to get this work, I do not mind clean install the Studio 13.10 then wait for your instruction AT ALL!

  Read the article

• Problem in installation in My Hp g4 1226se

  - by vivek Verma

  1vivek.100 Dual booting error in Hp pavilion g4 1226se Dear sir or Madam, My name is vivek verma.... I am the user of my Hp laptop which series and model name is HP PAVILION G4 1226SE........ i have purchase in the year of 2012 and month is February.....the windows 7 home basic 64 Bit is already installed in in my laptop.... Now i want to install Ubuntu 12.04 Lts or 13.10 lts..... i have try many time to install in my laptop via live CD or USB installer....and i have try many live CD and many pen drive to install Ubuntu ... but it is not done......now i am in very big problem...... when i put my CD or USB drive to boot and install the Ubuntu......my laptop screen is goes the some black (brightness of my laptop screen is very low and there is very low visibility ) and not showing any thing on my laptop screen..... and when i move the my laptop screen.....then there is graphics option in this screen to installation of the Ubuntu option......and when i press the dual boot with setting button and press to continue them my laptop is goes for shutdown after 2 or 5 minutes..... ...... and Hp service center person is saying to me our laptop hardware has no problem.....please contact to Ubuntu tech support............. show please help me if possible..... My laptop configuration is here...... Hardware Product Name g4-1226se Product Number QJ551EA Microprocessor 2.4 GHz Intel Core i5-2430M Microprocessor Cache 3 MB L3 cache Memory 4 GB DDR3 Memory Max Upgradeable to 4 GB DDR3 Video Graphics Intel HD 3000 (up to 1.65 GB) Display 35,5 cm (14,0") High-Definition LED-backlit BrightView Display (1366 x 768) Hard Drive 500 GB SATA (5400 rpm) Multimedia Drive SuperMulti DVD±R/RW with Double Layer Support Network Card Integrated 10/100 BASE-T Ethernet LAN Wireless Connectivity 802.11 b/g/n Sound Altec Lansing speakers Keyboard Full size island-style keyboard with home roll keys Pointing Device TouchPad supporting Multi-Touch gestures with On/Off button PC Card Slots Multi-Format Digital Media Card Reader for Secure Digital cards, Multimedia cards External Ports 1 VGA 1 headphone-out 1 microphone-in 3 USB 2.0 1 RJ45 Dimensions 34.1 x 23.1 x 3.56 cm Weight Starting at 2.1 kg Power 65W AC Power Adapter 6-cell Lithium-Ion (Li-Ion) What's In The Box Webcam with Integrated Digital Microphone (VGA) Software Operating System: Windows 7 Home Basic 64bit....Genuine..... ......... Sir please help me if possible....... Name =vivek verma Contact no.+919911146737 Email [email protected]

  Read the article

• Dual monitors: one monitor starts blinking and after a while turns black

  - by Anand

  I am using dual monitors in Ubuntu 11 with classical interface (Not Unity). I am using two monitors. The system can detect and automatically configure the monitors correctly. The problem is that after some time, one monitor will start blinking and after a while it will turn black. Does any one know that it is the problem of my hardware or the problem of Ubuntu system? Thank you very much in advance for your help! Anand

  Read the article

• ISO booting with grub2 in Ubuntu on an Apple

  - by Robert Vila

  I have Ubuntu with grub2 installed in an Apple Macbook pro with dual boot (using rEFIt), and I would like to use grub2 to boot the LiveCD ISO image of a system based in Debian too (CrunchBang). The ISO image is saved in the same hard disk, same partition as Ubuntu. I can easily boot many other LiveCD ISO images, but I cannot boot this one, and I cannot boot the MacOS system, from the grub menu, either. The installation of Ubuntu left a couple of menu entries to boot MacOS, but they never worked. SO I don't know if it is possible to boot them, and how. I have tried many options, but the menuentry I am trying now to boot crunchBang is this one: menuentry "crunchbang-10-20120207-i386.iso" { set isofile="/home/user/Desktop/ISO/crunchbang-10-20120207-i386.iso" loopback loop (hd0,3)$isofile linux (loop)/live/vmlinuz1 iso-scan/filename=$isofile toram=filesystem.squashfs findiso=$isofile boot=live config -- initrd (loop)/live/initrd1.img } And I copied it from here: http://linux4netbook.blogspot.com.es/2012/08/due-crunchbang-e-un-pennino.html

  Read the article

• Virus that makes all files and folders read-only filesystem on a usb drive

  - by ren florento

  Is there any way on how to remove a virus from Windows that makes the files and folders and the usb drive itself a read-only filesystem as this is an annoying one because the virus keeps copying itself as long as it sees a folder and keeps running which prevents you from creating and deleting files and folders from the usb drive and makes " mount -o remount,rw '/path' " ineffective ? btw i'm not really sure if it is a virus but what makes me think that it is a virus is for the reason the it creates a .exe file within every folder which was named after folder and it also immediately reverts to read-only filesystem which locks the files and folders even after executing the command " mount -o remount,rw '/path' ". i also think the virus is just running only within the usb drive as it is not affecting the folders on ubuntu. I could choose to reformat the usb drive as it only contains few important files but what concerns me is if such virus or whatever you may call it gets into my backup drives that contains many important files.Thanks for any help and advice you could give.

  Read the article

• Can't log in to GNOME after upgrade (raring -> saucy)

  - by x-yuri

  I've just upgraded my ubuntu (raring to saucy) and I now can't log in to GNOME. As opposed to virtual consoles (Ctrl-Alt-F1, for example). I set it up to log in automatically. But it asks for password now. I type in the password, press Enter, the screen blinks and here I am again at the login screen. Then I looked into /var/log/Xorg.0.log: [ 33.956] Initializing built-in extension DRI2 [ 33.956] (II) LoadModule: "glx" [ 33.956] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 33.956] (II) Module glx: vendor="X.Org Foundation" [ 33.956] compiled for 1.14.3, module version = 1.0.0 [ 33.956] ABI class: X.Org Server Extension, version 7.0 [ 33.956] (==) AIGLX enabled [ 33.956] Loading extension GLX [ 33.956] (==) Matched fglrx as autoconfigured driver 0 [ 33.956] (==) Matched ati as autoconfigured driver 1 [ 33.956] (==) Matched fglrx as autoconfigured driver 2 [ 33.956] (==) Matched ati as autoconfigured driver 3 [ 33.956] (==) Matched vesa as autoconfigured driver 4 [ 33.956] (==) Matched modesetting as autoconfigured driver 5 [ 33.956] (==) Matched fbdev as autoconfigured driver 6 [ 33.956] (==) Assigned the driver to the xf86ConfigLayout [ 33.956] (II) LoadModule: "fglrx" [ 33.957] (WW) Warning, couldn't open module fglrx [ 33.957] (II) UnloadModule: "fglrx" [ 33.957] (II) Unloading fglrx [ 33.957] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 33.957] (II) LoadModule: "ati" [ 33.957] (WW) Warning, couldn't open module ati [ 33.957] (II) UnloadModule: "ati" [ 33.957] (II) Unloading ati [ 33.957] (EE) Failed to load module "ati" (module does not exist, 0) [ 33.957] (II) LoadModule: "vesa" [ 33.957] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 33.957] (II) Module vesa: vendor="X.Org Foundation" [ 33.957] compiled for 1.14.1, module version = 2.3.2 [ 33.957] Module class: X.Org Video Driver [ 33.957] ABI class: X.Org Video Driver, version 14.1 [ 33.957] (II) LoadModule: "modesetting" [ 33.957] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 33.957] (II) Module modesetting: vendor="X.Org Foundation" [ 33.957] compiled for 1.14.1, module version = 0.8.0 [ 33.957] Module class: X.Org Video Driver [ 33.957] ABI class: X.Org Video Driver, version 14.1 [ 33.957] (II) LoadModule: "fbdev" [ 33.957] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 33.958] (II) Module fbdev: vendor="X.Org Foundation" [ 33.958] compiled for 1.14.1, module version = 0.4.3 [ 33.958] Module class: X.Org Video Driver [ 33.958] ABI class: X.Org Video Driver, version 14.1 [ 33.958] (==) Matched fglrx as autoconfigured driver 0 [ 33.958] (==) Matched ati as autoconfigured driver 1 [ 33.958] (==) Matched fglrx as autoconfigured driver 2 [ 33.958] (==) Matched ati as autoconfigured driver 3 [ 33.958] (==) Matched vesa as autoconfigured driver 4 [ 33.958] (==) Matched modesetting as autoconfigured driver 5 [ 33.958] (==) Matched fbdev as autoconfigured driver 6 [ 33.958] (==) Assigned the driver to the xf86ConfigLayout [ 33.958] (II) LoadModule: "fglrx" [ 33.958] (WW) Warning, couldn't open module fglrx [ 33.958] (II) UnloadModule: "fglrx" [ 33.958] (II) Unloading fglrx [ 33.958] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 33.958] (II) LoadModule: "ati" [ 33.958] (WW) Warning, couldn't open module ati [ 33.958] (II) UnloadModule: "ati" [ 33.958] (II) Unloading ati [ 33.958] (EE) Failed to load module "ati" (module does not exist, 0) [ 33.958] (II) LoadModule: "vesa" [ 33.958] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 33.958] (II) Module vesa: vendor="X.Org Foundation" [ 33.958] compiled for 1.14.1, module version = 2.3.2 [ 33.958] Module class: X.Org Video Driver [ 33.958] ABI class: X.Org Video Driver, version 14.1 [ 33.958] (II) UnloadModule: "vesa" [ 33.958] (II) Unloading vesa [ 33.958] (II) Failed to load module "vesa" (already loaded, 0) [ 33.958] (II) LoadModule: "modesetting" [ 33.959] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 33.959] (II) Module modesetting: vendor="X.Org Foundation" [ 33.959] compiled for 1.14.1, module version = 0.8.0 [ 33.959] Module class: X.Org Video Driver [ 33.959] ABI class: X.Org Video Driver, version 14.1 [ 33.959] (II) UnloadModule: "modesetting" [ 33.959] (II) Unloading modesetting [ 33.959] (II) Failed to load module "modesetting" (already loaded, 0) [ 33.959] (II) LoadModule: "fbdev" [ 33.959] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 33.959] (II) Module fbdev: vendor="X.Org Foundation" [ 33.959] compiled for 1.14.1, module version = 0.4.3 [ 33.959] Module class: X.Org Video Driver [ 33.959] ABI class: X.Org Video Driver, version 14.1 [ 33.959] (II) UnloadModule: "fbdev" [ 33.959] (II) Unloading fbdev [ 33.959] (II) Failed to load module "fbdev" (already loaded, 0) [ 33.959] (II) VESA: driver for VESA chipsets: vesa [ 33.959] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 33.959] (II) FBDEV: driver for framebuffer: fbdev [ 33.959] (++) using VT number 7 If I install fglrx, it reads: [ 37.152] Initializing built-in extension DRI2 [ 37.152] (II) LoadModule: "glx" [ 37.152] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so [ 37.152] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 37.152] compiled for 6.9.0, module version = 1.0.0 [ 37.152] Loading extension GLX [ 37.153] (==) Matched fglrx as autoconfigured driver 0 [ 37.153] (==) Matched ati as autoconfigured driver 1 [ 37.153] (==) Matched vesa as autoconfigured driver 2 [ 37.153] (==) Matched modesetting as autoconfigured driver 3 [ 37.153] (==) Matched fbdev as autoconfigured driver 4 [ 37.153] (==) Assigned the driver to the xf86ConfigLayout [ 37.153] (II) LoadModule: "fglrx" [ 37.153] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so [ 37.168] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc." [ 37.168] compiled for 1.4.99.906, module version = 13.10.10 [ 37.168] Module class: X.Org Video Driver [ 37.168] (II) Loading sub module "fglrxdrm" [ 37.168] (II) LoadModule: "fglrxdrm" [ 37.168] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so [ 37.169] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 37.169] compiled for 1.4.99.906, module version = 13.10.10 [ 37.169] (II) LoadModule: "ati" [ 37.169] (WW) Warning, couldn't open module ati [ 37.169] (II) UnloadModule: "ati" [ 37.169] (II) Unloading ati [ 37.169] (EE) Failed to load module "ati" (module does not exist, 0) [ 37.169] (II) LoadModule: "vesa" [ 37.169] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 37.169] (II) Module vesa: vendor="X.Org Foundation" [ 37.169] compiled for 1.14.1, module version = 2.3.2 [ 37.169] Module class: X.Org Video Driver [ 37.169] ABI class: X.Org Video Driver, version 14.1 [ 37.169] (II) LoadModule: "modesetting" [ 37.170] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 37.170] (II) Module modesetting: vendor="X.Org Foundation" [ 37.170] compiled for 1.14.1, module version = 0.8.0 [ 37.170] Module class: X.Org Video Driver [ 37.170] ABI class: X.Org Video Driver, version 14.1 [ 37.170] (II) LoadModule: "fbdev" [ 37.170] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 37.170] (II) Module fbdev: vendor="X.Org Foundation" [ 37.170] compiled for 1.14.1, module version = 0.4.3 [ 37.170] Module class: X.Org Video Driver [ 37.170] ABI class: X.Org Video Driver, version 14.1 [ 37.170] (==) Matched fglrx as autoconfigured driver 0 [ 37.170] (==) Matched ati as autoconfigured driver 1 [ 37.170] (==) Matched vesa as autoconfigured driver 2 [ 37.170] (==) Matched modesetting as autoconfigured driver 3 [ 37.170] (==) Matched fbdev as autoconfigured driver 4 [ 37.170] (==) Assigned the driver to the xf86ConfigLayout [ 37.170] (II) LoadModule: "fglrx" [ 37.170] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so [ 37.170] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc." [ 37.170] compiled for 1.4.99.906, module version = 13.10.10 [ 37.170] Module class: X.Org Video Driver [ 37.170] (II) LoadModule: "ati" [ 37.170] (WW) Warning, couldn't open module ati [ 37.170] (II) UnloadModule: "ati" [ 37.171] (II) Unloading ati [ 37.171] (EE) Failed to load module "ati" (module does not exist, 0) [ 37.171] (II) LoadModule: "vesa" [ 37.171] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 37.171] (II) Module vesa: vendor="X.Org Foundation" [ 37.171] compiled for 1.14.1, module version = 2.3.2 [ 37.171] Module class: X.Org Video Driver [ 37.171] ABI class: X.Org Video Driver, version 14.1 [ 37.171] (II) UnloadModule: "vesa" [ 37.171] (II) Unloading vesa [ 37.171] (II) Failed to load module "vesa" (already loaded, 0) [ 37.171] (II) LoadModule: "modesetting" [ 37.171] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 37.171] (II) Module modesetting: vendor="X.Org Foundation" [ 37.171] compiled for 1.14.1, module version = 0.8.0 [ 37.171] Module class: X.Org Video Driver [ 37.171] ABI class: X.Org Video Driver, version 14.1 [ 37.171] (II) UnloadModule: "modesetting" [ 37.171] (II) Unloading modesetting [ 37.171] (II) Failed to load module "modesetting" (already loaded, 0) [ 37.171] (II) LoadModule: "fbdev" [ 37.171] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 37.171] (II) Module fbdev: vendor="X.Org Foundation" [ 37.171] compiled for 1.14.1, module version = 0.4.3 [ 37.171] Module class: X.Org Video Driver [ 37.171] ABI class: X.Org Video Driver, version 14.1 [ 37.171] (II) UnloadModule: "fbdev" [ 37.171] (II) Unloading fbdev [ 37.171] (II) Failed to load module "fbdev" (already loaded, 0) [ 37.171] (II) AMD Proprietary Linux Driver Version Identifier:13.10.10 [ 37.171] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.101 [ 37.171] (II) AMD Proprietary Linux Driver Build Date: May 23 2013 15:49:35 [ 37.171] (II) VESA: driver for VESA chipsets: vesa [ 37.171] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 37.171] (II) FBDEV: driver for framebuffer: fbdev [ 37.171] (++) using VT number 7 I did more installing/removing packages than that. There were a moment when it said: (EE) Failed to load /usr/lib64/xorg/modules/libglamoregl.so: /usr/lib64/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context Also there is init: not found in ~/.xsession-errors: /usr/sbin/lightdm-session: 5: exec: init: not found Actually, I'm out of ideas. What about you? :)

  Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >