Search Results

Search found 20048 results on 802 pages for 'failed installation'.

Page 99/802 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

• Mail server DNS failed to resolved by Mac clients

  - by Concordus Applications

  We have two internal DNS servers. One is located on a linux server box and the other is the router's DNS management. We set the linux box as primary DNS via DHCP and the router as secondary. We have a few Mac clients that are accessing our internal mail server (hostnamed "mail" internally). When using IMAP or SMTP against the mail server internally, the mac boxes will sometimes fail to locate the server. If I use NSLOOKUP I can see that "mail" is pointed to the correct IP address and is being resolved via the correct DNS server, but if I ping "mail" it fails. ~ (bash)$ nslookup mail Server: 254.254.254.206 Address: 254.254.254.206#53 Name: mail.example.com Address: 254.254.254.205 Note: I replaced our actual internal IP address with 254.254.254.* If I wait a few minutes (3-5 minutes), somehow it resolves itself and sends successfully. This happens multiple times a day. The /etc/hosts file on the mac boxes is the default config. ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost Is there something about Mac clients I should know to prevent this failed DNS resolution? Client boxes are: OSX 10.7.4, 8GB RAM, i5 MacBooks Server is: Ubuntu 12.04 Server

  Read the article

• Ubuntu 9.10 won't reboot after replacing a failed drive

  - by user149041

  Hello Serverfault community. I hope someone can shed light on a peculiar problem I am having with an Ubuntu 9.10 server install. I am not a Linux expert but have the responsibility of fixing the box if something goes wrong. DOH! I have Ubuntu 9.10 server installed on on a desktop platform: Compaq Presario SR5027CL. There are two 1TB SATA drives configured in a RAID 1 array; I use the box as an email backup server for a small group of users. Last week one of the drives failed and was replaced with a new drive of the same type. The problem I have been having is getting the box to reboot after a restart or a shutdown halt. The OS and the RAID 1 array are on the same drives that make up the RAID 1 array. The replacement drive (sda) was added to the box and the partitions were created to match the existing good drive (sdb). The array is made up of sda1 and sdb1. I found an interesting point while checking the BIOS settings: there is a "HDD Boot Group Priority" section, and the new drive was selected as the "1. 3rd master"; the server wouldn't boot configured like that, but when I set the old drive to be "1. 4th master", the box will reboot. I'm checking some more things, but I would certainly appreciate any useful information. Thanks in advance.

  Read the article

• Windows 8 doesn't start up after installation

  - by Raj BD

  I have a DELL INSPIRON n5110 machine running Windows 7 Home Premium 64-bit. It has 6GB of RAM and 500 GB hard disk capable to run any Windows and Linux system. And I recently attempted to install Windows 8 in the machine. Installation goes fine and smooth until the final stage when windows is done installing and GETS DEVICES READY. When GETTNG DEVICES READY reaches about 60%, the screen goes blank with the machine running. After a while it reboots. And after the new Windows Logo with dotted circles are done showing up, the screen goes blank again (when we'd expect login screen to show up). There is not even a cursor. I can see the HARD DISK ACTIVITY LED blinking but nothing shows up in the screen. I've tried CLEAN INSTALL several times. The DVD is fine, it installed and worked well in my friends' laptop PCs. I tried installing both PRO version and ENTERPRISE version and both 32-bit and 64-bit. But the problem was same everytime. Finally, I had to reinstall Windows 7 which installed and ran without any problem. The problem, we can guess, is GRAPHICS perhaps. I have Intel SandyBridge Graphics Mobile Chipset (Intel HD Graphics 3000). But if Windows 7 and Linux distrubutions like Mint and BackTrack can run on the machine, why on earth, would Windows 8 not run?

  Read the article

• Troubleshoot Perl module installation on Mac OS X

  - by Daniel Standage

  I'm trying to install the Perl module Set::IntervalTree on Mac OS X. I recently installed it today on an Ubuntu box with no problem. I simply started cpan, entered install Set:IntervalTree, and it all worked out. However, the installation failed on Mac OS X--it spits out a huge list of compiler errors (below). How would I troubleshoot this. I don't even know where to begin. cpan[1]> install Set::IntervalTree CPAN: Storable loaded ok (v2.18) Going to read /Users/standage/.cpan/Metadata Database was generated on Fri, 14 Jan 2011 02:58:42 GMT CPAN: YAML loaded ok (v0.72) Going to read /Users/standage/.cpan/build/ ............................................................................DONE Found 1 old build, restored the state of 1 Running install for module 'Set::IntervalTree' Running make for B/BE/BENBOOTH/Set-IntervalTree-0.01.tar.gz CPAN: Digest::SHA loaded ok (v5.45) CPAN: Compress::Zlib loaded ok (v2.008) Checksum for /Users/standage/.cpan/sources/authors/id/B/BE/BENBOOTH/Set-IntervalTree-0.01.tar.gz ok Scanning cache /Users/standage/.cpan/build for sizes ............................................................................DONE x Set-IntervalTree-0.01/ x Set-IntervalTree-0.01/src/ x Set-IntervalTree-0.01/src/Makefile x Set-IntervalTree-0.01/src/interval_tree.h x Set-IntervalTree-0.01/src/test_main.cc x Set-IntervalTree-0.01/lib/ x Set-IntervalTree-0.01/lib/Set/ x Set-IntervalTree-0.01/lib/Set/IntervalTree.pm x Set-IntervalTree-0.01/Changes x Set-IntervalTree-0.01/MANIFEST x Set-IntervalTree-0.01/t/ x Set-IntervalTree-0.01/t/Set-IntervalTree.t x Set-IntervalTree-0.01/typemap x Set-IntervalTree-0.01/perlobject.map x Set-IntervalTree-0.01/IntervalTree.xs x Set-IntervalTree-0.01/Makefile.PL x Set-IntervalTree-0.01/README x Set-IntervalTree-0.01/META.yml CPAN: File::Temp loaded ok (v0.18) CPAN.pm: Going to build B/BE/BENBOOTH/Set-IntervalTree-0.01.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Set::IntervalTree cp lib/Set/IntervalTree.pm blib/lib/Set/IntervalTree.pm AutoSplitting blib/lib/Set/IntervalTree.pm (blib/lib/auto/Set/IntervalTree) /usr/bin/perl /System/Library/Perl/5.10.0/ExtUtils/xsubpp -C++ -typemap /System/Library/Perl/5.10.0/ExtUtils/typemap -typemap perlobject.map -typemap typemap IntervalTree.xs > IntervalTree.xsc && mv IntervalTree.xsc IntervalTree.c g++ -c -Isrc -arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include -g -O0 -DVERSION=\"0.01\" -DXS_VERSION=\"0.01\" "-I/System/Library/Perl/5.10.0/darwin-thread-multi-2level/CORE" -Isrc IntervalTree.c In file included from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/bits/locale_facets.h:4420:40: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/bits/locale_facets.h:4467:34: error: macro "do_close" requires 2 arguments, but only 1 given /usr/include/c++/4.2.1/bits/locale_facets.h:4486:55: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/bits/locale_facets.h:4513:23: error: macro "do_close" requires 2 arguments, but only 1 given In file included from /usr/include/c++/4.2.1/bits/locale_facets.h:4599, from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:58:38: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:67:71: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:78:39: error: macro "do_close" requires 2 arguments, but only 1 given In file included from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/bits/locale_facets.h:4486: error: ‘do_open’ declared as a ‘virtual’ field /usr/include/c++/4.2.1/bits/locale_facets.h:4486: error: expected ‘;’ before ‘const’ /usr/include/c++/4.2.1/bits/locale_facets.h:4513: error: variable or field ‘do_close’ declared void /usr/include/c++/4.2.1/bits/locale_facets.h:4513: error: expected ‘;’ before ‘const’ In file included from /usr/include/c++/4.2.1/bits/locale_facets.h:4599, from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:67: error: expected initializer before ‘const’ /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:78: error: expected initializer before ‘const’ In file included from IntervalTree.xs:19: src/interval_tree.h:95: error: type/value mismatch at argument 1 in template parameter list for ‘template<class _Tp, class _Alloc> class std::vector’ src/interval_tree.h:95: error: expected a type, got ‘IntervalTree<T,N>::it_recursion_node’ src/interval_tree.h:95: error: template argument 2 is invalid src/interval_tree.h: In constructor ‘IntervalTree<T, N>::IntervalTree()’: src/interval_tree.h:130: error: expected type-specifier src/interval_tree.h:130: error: expected `;' src/interval_tree.h:135: error: expected type-specifier src/interval_tree.h:135: error: expected `;' src/interval_tree.h:141: error: request for member ‘push_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h: In member function ‘void IntervalTree<T, N>::LeftRotate(IntervalTree<T, N>::Node*)’: src/interval_tree.h:178: error: ‘y’ was not declared in this scope src/interval_tree.h: In member function ‘void IntervalTree<T, N>::RightRotate(IntervalTree<T, N>::Node*)’: src/interval_tree.h:240: error: ‘x’ was not declared in this scope src/interval_tree.h: In member function ‘void IntervalTree<T, N>::TreeInsertHelp(IntervalTree<T, N>::Node*)’: src/interval_tree.h:298: error: ‘x’ was not declared in this scope src/interval_tree.h:299: error: ‘y’ was not declared in this scope src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N)’: src/interval_tree.h:375: error: ‘y’ was not declared in this scope src/interval_tree.h:376: error: ‘x’ was not declared in this scope src/interval_tree.h:377: error: ‘newNode’ was not declared in this scope src/interval_tree.h:379: error: expected type-specifier src/interval_tree.h:379: error: expected `;' src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::GetSuccessorOf(IntervalTree<T, N>::Node*) const’: src/interval_tree.h:450: error: ‘y’ was not declared in this scope src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::GetPredecessorOf(IntervalTree<T, N>::Node*) const’: src/interval_tree.h:483: error: ‘y’ was not declared in this scope src/interval_tree.h: In destructor ‘IntervalTree<T, N>::~IntervalTree()’: src/interval_tree.h:546: error: ‘x’ was not declared in this scope src/interval_tree.h:547: error: type/value mismatch at argument 1 in template parameter list for ‘template<class _Tp, class _Alloc> class std::vector’ src/interval_tree.h:547: error: expected a type, got ‘(IntervalTree<T,N>::Node * <expression error>)’ src/interval_tree.h:547: error: template argument 2 is invalid src/interval_tree.h:547: error: invalid type in declaration before ‘;’ token src/interval_tree.h:551: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:554: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:557: error: request for member ‘empty’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:558: error: request for member ‘back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:559: error: request for member ‘pop_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:561: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:564: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h: In member function ‘void IntervalTree<T, N>::DeleteFixUp(IntervalTree<T, N>::Node*)’: src/interval_tree.h:613: error: ‘w’ was not declared in this scope src/interval_tree.h:614: error: ‘rootLeft’ was not declared in this scope src/interval_tree.h: In member function ‘T IntervalTree<T, N>::remove(IntervalTree<T, N>::Node*)’: src/interval_tree.h:697: error: ‘y’ was not declared in this scope src/interval_tree.h:698: error: ‘x’ was not declared in this scope src/interval_tree.h: In member function ‘std::vector<T, std::allocator<_CharT> > IntervalTree<T, N>::fetch(N, N)’: src/interval_tree.h:819: error: ‘x’ was not declared in this scope src/interval_tree.h:833: error: invalid types ‘int[size_t]’ for array subscript src/interval_tree.h:836: error: request for member ‘push_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:837: error: request for member ‘back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:838: error: request for member ‘back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:839: error: request for member ‘back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:840: error: request for member ‘size’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:846: error: request for member ‘size’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:847: error: expected `;' before ‘back’ src/interval_tree.h:848: error: request for member ‘pop_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:850: error: ‘back’ was not declared in this scope src/interval_tree.h:853: error: invalid types ‘int[size_t]’ for array subscript IntervalTree.c: In function ‘void boot_Set__IntervalTree(PerlInterpreter*, CV*)’: IntervalTree.c:365: warning: deprecated conversion from string constant to ‘char*’ src/interval_tree.h: In constructor ‘IntervalTree<T, N>::IntervalTree() [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.c:67: instantiated from here src/interval_tree.h:130: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment src/interval_tree.h:135: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment ...blah blah blah... ...blah blah blah... ...blah blah blah... ...blah blah blah... ...blah blah blah... ...blah blah blah... src/interval_tree.h:848: error: request for member ‘pop_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:850: error: ‘back’ was not declared in this scope src/interval_tree.h:853: error: invalid types ‘int[size_t]’ for array subscript IntervalTree.c: In function ‘void boot_Set__IntervalTree(PerlInterpreter*, CV*)’: IntervalTree.c:365: warning: deprecated conversion from string constant to ‘char*’ src/interval_tree.h: In constructor ‘IntervalTree<T, N>::IntervalTree() [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.c:67: instantiated from here src/interval_tree.h:130: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment src/interval_tree.h:135: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.xs:57: instantiated from here src/interval_tree.h:375: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:375: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h:376: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:376: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h:377: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:377: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘std::vector<T, std::allocator<_CharT> > IntervalTree<T, N>::fetch(N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.xs:65: instantiated from here src/interval_tree.h:819: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:819: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant IntervalTree.xs:65: instantiated from here src/interval_tree.h:847: error: dependent-name ‘IntervalTree<T,N>::it_recursion_node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:847: note: say ‘typename IntervalTree<T,N>::it_recursion_node’ if a type is meant src/interval_tree.h: In destructor ‘IntervalTree<T, N>::~IntervalTree() [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.c:205: instantiated from here src/interval_tree.h:546: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:546: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘void IntervalTree<T, N>::TreeInsertHelp(IntervalTree<T, N>::Node*) [with T = std::tr1::shared_ptr<sv>, N = long int]’: src/interval_tree.h:380: instantiated from ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’ IntervalTree.xs:57: instantiated from here src/interval_tree.h:298: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:298: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h:299: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:299: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘void IntervalTree<T, N>::LeftRotate(IntervalTree<T, N>::Node*) [with T = std::tr1::shared_ptr<sv>, N = long int]’: src/interval_tree.h:395: instantiated from ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’ IntervalTree.xs:57: instantiated from here src/interval_tree.h:178: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:178: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘void IntervalTree<T, N>::RightRotate(IntervalTree<T, N>::Node*) [with T = std::tr1::shared_ptr<sv>, N = long int]’: src/interval_tree.h:399: instantiated from ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’ IntervalTree.xs:57: instantiated from here src/interval_tree.h:240: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:240: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant lipo: can't open input file: /var/tmp//ccLthuaw.out (No such file or directory) make: *** [IntervalTree.o] Error 1 BENBOOTH/Set-IntervalTree-0.01.tar.gz make -- NOT OK Running make test Can't test without successful make Running make install Make had returned bad status, install seems impossible Failed during this command: BENBOOTH/Set-IntervalTree-0.01.tar.gz : make NO

  Read the article

• How to install php-devel under CentOS 6.3 x64?

  - by Jeremy Dicaire

  I'm trying to install php-devel on my CentOS 6.3 VPS and get a failed dependencies test. From phpinfos(): SYSTEM Linux 2.6.32-279.5.2.el6.x86_64 #1 x86_64 NTS error: Failed dependencies: php(x86-64) = 5.4.6-1.el6.remi is needed by php-devel-5.4.6-1.el6.remi.x86_64 I've tried the following RPM packages: php54w-devel-5.4.6-1.w6.x86_64.rpm php-devel-5.4.6-1.el6.remi.i686.rpm php-devel-5.4.6-1.el6.remi.x86_64.rpm One of the above package gave me this: root@sv1 [/tmp]# rpm -Uvh php-devel-5.4.6-1.el6.remi.i686.rpm warning: php-devel-5.4.6-1.el6.remi.i686.rpm: Header V3 DSA/SHA1 Signature, key ID 00f97f56: NOKEY error: Failed dependencies: php(x86-32) = 5.4.6-1.el6.remi is needed by php-devel-5.4.6-1.el6.remi.i686 libbz2.so.1 is needed by php-devel-5.4.6-1.el6.remi.i686 libcom_err.so.2 is needed by php-devel-5.4.6-1.el6.remi.i686 libcrypto.so.10 is needed by php-devel-5.4.6-1.el6.remi.i686 libedit.so.0 is needed by php-devel-5.4.6-1.el6.remi.i686 libgmp.so.3 is needed by php-devel-5.4.6-1.el6.remi.i686 libgssapi_krb5.so.2 is needed by php-devel-5.4.6-1.el6.remi.i686 libk5crypto.so.3 is needed by php-devel-5.4.6-1.el6.remi.i686 libkrb5.so.3 is needed by php-devel-5.4.6-1.el6.remi.i686 libncurses.so.5 is needed by php-devel-5.4.6-1.el6.remi.i686 libssl.so.10 is needed by php-devel-5.4.6-1.el6.remi.i686 libstdc++.so.6 is needed by php-devel-5.4.6-1.el6.remi.i686 libxml2.so.2 is needed by php-devel-5.4.6-1.el6.remi.i686 libxml2.so.2(LIBXML2_2.4.30) is needed by php-devel-5.4.6-1.el6.remi.i686 libxml2.so.2(LIBXML2_2.5.2) is needed by php-devel-5.4.6-1.el6.remi.i686 libxml2.so.2(LIBXML2_2.6.0) is needed by php-devel-5.4.6-1.el6.remi.i686 libxml2.so.2(LIBXML2_2.6.11) is needed by php-devel-5.4.6-1.el6.remi.i686 libxml2.so.2(LIBXML2_2.6.5) is needed by php-devel-5.4.6-1.el6.remi.i686 libz.so.1 is needed by php-devel-5.4.6-1.el6.remi.i686 I don't know how to fix this error and download all the dependencies. Thank you. Edit 1 (for quanta): Here is "yum repolist": root@sv1 [/tmp]# yum repolist Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile * base: mirror.atlanticmetro.net * epel: mirror.cogentco.com * extras: mirror.atlanticmetro.net * rpmforge: mirror.us.leaseweb.net * updates: centos.mirror.choopa.net repo id repo name status base CentOS-6 - Base 5,980+366 epel Extra Packages for Enterprise Linux 6 - x86_64 6,493+1,272 extras CentOS-6 - Extras 4 rpmforge RHEL 6 - RPMforge.net - dag 2,123+2,310 updates CentOS-6 - Updates 499+29 repolist: 15,099 root@sv1 [/tmp]# rpm -qa | grep php didn't return any result. I forgot to mention I'm using cPanel/WHM Edit 2 after adding the Remi repo: >root@sv1 [/etc/yum.repos.d]# yum clean all Loaded plugins: fastestmirror, presto Cleaning repos: base epel extras remi remi-test rpmforge updates Cleaning up Everything Cleaning up list of fastest mirrors 1 delta-package files removed, by presto >root@sv1 [/etc/yum.repos.d]# yum repolist Loaded plugins: fastestmirror, presto Determining fastest mirrors epel/metalink | 12 kB 00:00 * base: centos.mirror.nac.net * epel: mirror.symnds.com * extras: centos.mirror.choopa.net * remi: remi-mirror.dedipower.com * remi-test: remi-mirror.dedipower.com * rpmforge: mirror.us.leaseweb.net * updates: centos.mirror.nac.net base | 3.7 kB 00:00 base/primary_db | 4.5 MB 00:00 epel | 4.3 kB 00:00 epel/primary_db | 4.7 MB 00:00 extras | 3.0 kB 00:00 extras/primary_db | 6.3 kB 00:00 remi | 2.9 kB 00:00 remi/primary_db | 330 kB 00:00 remi-test | 2.9 kB 00:00 remi-test/primary_db | 85 kB 00:00 rpmforge | 1.9 kB 00:00 rpmforge/primary_db | 2.5 MB 00:00 updates | 3.5 kB 00:00 updates/primary_db | 2.3 MB 00:00 repo id repo name status base CentOS-6 - Base 5,980+366 epel Extra Packages for Enterprise Linux 6 - x86_64 6,493+1,272 extras CentOS-6 - Extras 4 remi Les RPM de remi pour Enterprise Linux 6 - x86_64 96+564 remi-test Les RPM de remi en test pour Enterprise Linux 6 - x86_64 25+139 rpmforge RHEL 6 - RPMforge.net - dag 2,123+2,310 updates CentOS-6 - Updates 499+29 repolist: 15,220 >root@sv1 [/etc/yum.repos.d]# yum install php-devel Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile * base: centos.mirror.nac.net * epel: mirror.symnds.com * extras: centos.mirror.choopa.net * remi: remi-mirror.dedipower.com * remi-test: remi-mirror.dedipower.com * rpmforge: mirror.us.leaseweb.net * updates: centos.mirror.nac.net Setting up Install Process No package php-devel available. Error: Nothing to do >root@sv1 [/etc/yum.repos.d]#

  Read the article

• springTestContextBeforeTestMethod failed in Maven spring-test

  - by joejax

  I try to setup a project with spring-test using TestNg in Maven. The code is like: @ContextConfiguration(locations={"test-context.xml"}) public class AppTest extends AbstractTestNGSpringContextTests { @Test public void testApp() { assert true; } } A test-context.xml simply defined a bean: <bean id="app" class="org.sonatype.mavenbook.simple.App"/> I got error for Failed to load ApplicationContext when running mvn test from command line, seems it cannot find the test-context.xml file; however, I can get it run correctly inside Eclipse (with TestNg plugin). So, test-context.xml is under src/test/resources/, how do I indicate this in the pom.xml so that 'mvn test' command will work? Thanks, UPDATE: Thanks for the reply. Cannot load context file error was caused by I moved the file arround in different location since I though the classpath was the problem. Now I found the context file seems loaded from the Maven output, but the test is failed: Running TestSuite May 25, 2010 9:55:13 AM org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions INFO: Loading XML bean definitions from class path resource [test-context.xml] May 25, 2010 9:55:13 AM org.springframework.context.support.AbstractApplicationContext prepareRefresh INFO: Refreshing org.springframework.context.support.GenericApplicationContext@171bbc9: display name [org.springframework.context.support.GenericApplicationContext@171bbc9]; startup date [Tue May 25 09:55:13 PDT 2010]; root of context hierarchy May 25, 2010 9:55:13 AM org.springframework.context.support.AbstractApplicationContext obtainFreshBeanFactory INFO: Bean factory for application context [org.springframework.context.support.GenericApplicationContext@171bbc9]: org.springframework.beans.factory.support.DefaultListableBeanFactory@1df8b99 May 25, 2010 9:55:13 AM org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons INFO: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@1df8b99: defining beans [app,org.springframework.context.annotation.internalCommonAnnotationProcessor,org.springframework.context.annotation.internalAutowiredAnnotationProcessor,org.springframework.context.annotation.internalRequiredAnnotationProcessor]; root of factory hierarchy Tests run: 3, Failures: 2, Errors: 0, Skipped: 1, Time elapsed: 0.63 sec <<< FAILURE! Results : Failed tests: springTestContextBeforeTestMethod(org.sonatype.mavenbook.simple.AppTest) springTestContextAfterTestMethod(org.sonatype.mavenbook.simple.AppTest) Tests run: 3, Failures: 2, Errors: 0, Skipped: 1 If I use spring-test version 3.0.2.RELEASE, the error becomes: org.springframework.test.context.testng.AbstractTestNGSpringContextTests.springTestContextPrepareTestInstance() is depending on nonexistent method null Here is the structure of the project: simple |-- pom.xml `-- src |-- main | `-- java `-- test |-- java `-- resources |-- test-context.xml `-- testng.xml testng.xml: <suite name="Suite" parallel="false"> <test name="Test"> <classes> <class name="org.sonatype.mavenbook.simple.AppTest"/> </classes> </test> </suite> test-context.xml: <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd" default-lazy-init="true"> <bean id="app" class="org.sonatype.mavenbook.simple.App"/> </beans> In the pom.xml, I add testng, spring, and spring-test artifacts, and plugin: <dependency> <groupId>org.testng</groupId> <artifactId>testng</artifactId> <version>5.1</version> <classifier>jdk15</classifier> <scope>test</scope> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-test</artifactId> <version>2.5.6</version> <scope>test</scope> </dependency> <build> <finalName>simple</finalName> <plugins> <plugin> <artifactId>maven-compiler-plugin</artifactId> <configuration> <source>1.6</source> <target>1.6</target> </configuration> </plugin> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-surefire-plugin</artifactId> <configuration> <suiteXmlFiles> <suiteXmlFile>src/test/resources/testng.xml</suiteXmlFile> </suiteXmlFiles> </configuration> </plugin> </plugins> Basically, I replaced 'A Simple Maven Project' Junit with TestNg, hope it works. UPDATE: I think I got the problem (still don't know why) - Whenever I extends AbstractTestNGSpringContextTests or AbstractTransactionalTestNGSpringContextTests, the test will failed with this error: Failed tests: springTestContextBeforeTestMethod(org.sonatype.mavenbook.simple.AppTest) springTestContextAfterTestMethod(org.sonatype.mavenbook.simple.AppTest) So, eventually the error went away when I override the two methods. I don't think this is the right way, didn't find much info from spring-test doc. If you know spring test framework, please shred some light on this.

  Read the article

• Encouter error "Linux ip -6 addr add failed" while setting up OpenVPN client

  - by Mickel

  I am trying to set up my router to use OpenVPN and have gotten quite far (I think), but something seems to be missing and I am not sure what. Here is my configuration for the client: client dev tun proto udp remote ovpn.azirevpn.net 1194 remote-random resolv-retry infinite auth-user-pass /tmp/password.txt nobind persist-key persist-tun ca /tmp/AzireVPN.ca.crt remote-cert-tls server reneg-sec 0 verb 3 OpenVPN client log: Nov 8 15:45:13 rc_service: httpd 15776:notify_rc start_vpnclient1 Nov 8 15:45:14 openvpn[27196]: OpenVPN 2.3.2 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Nov 1 2013 Nov 8 15:45:14 openvpn[27196]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Nov 8 15:45:14 openvpn[27196]: Socket Buffers: R=[116736->131072] S=[116736->131072] Nov 8 15:45:14 openvpn[27202]: UDPv4 link local: [undef] Nov 8 15:45:14 openvpn[27202]: UDPv4 link remote: [AF_INET]178.132.75.14:1194 Nov 8 15:45:14 openvpn[27202]: TLS: Initial packet from [AF_INET]178.132.75.14:1194, sid=44d80db5 8b36adf9 Nov 8 15:45:14 openvpn[27202]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Nov 8 15:45:14 openvpn[27202]: VERIFY OK: depth=1, C=RU, ST=Moscow, L=Moscow, O=Azire Networks, OU=VPN, CN=Azire Networks, name=Azire Networks, [email protected] Nov 8 15:45:14 openvpn[27202]: Validating certificate key usage Nov 8 15:45:14 openvpn[27202]: ++ Certificate has key usage 00a0, expects 00a0 Nov 8 15:45:14 openvpn[27202]: VERIFY KU OK Nov 8 15:45:14 openvpn[27202]: Validating certificate extended key usage Nov 8 15:45:14 openvpn[27202]: ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Nov 8 15:45:14 openvpn[27202]: VERIFY EKU OK Nov 8 15:45:14 openvpn[27202]: VERIFY OK: depth=0, C=RU, ST=Moscow, L=Moscow, O=AzireVPN, OU=VPN, CN=ovpn, name=ovpn, [email protected] Nov 8 15:45:15 openvpn[27202]: Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Nov 8 15:45:15 openvpn[27202]: Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Nov 8 15:45:15 openvpn[27202]: Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Nov 8 15:45:15 openvpn[27202]: Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Nov 8 15:45:15 openvpn[27202]: Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA Nov 8 15:45:15 openvpn[27202]: [ovpn] Peer Connection Initiated with [AF_INET]178.132.75.14:1194 Nov 8 15:45:17 openvpn[27202]: SENT CONTROL [ovpn]: 'PUSH_REQUEST' (status=1) Nov 8 15:45:17 openvpn[27202]: PUSH: Received control message: 'PUSH_REPLY,ifconfig-ipv6 2a03:8600:1001:4010::101f/64 2a03:8600:1001:4010::1,route-ipv6 2000::/3 2A03:8600:1001:4010::1,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 194.1.247.30,tun-ipv6,route-gateway 178.132.77.1,topology subnet,ping 3,ping-restart 15,ifconfig 178.132.77.33 255.255.255.192' Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: timers and/or timeouts modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: --ifconfig/up options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: route options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: route-related options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Nov 8 15:45:17 openvpn[27202]: TUN/TAP device tun0 opened Nov 8 15:45:17 openvpn[27202]: TUN/TAP TX queue length set to 100 Nov 8 15:45:17 openvpn[27202]: do_ifconfig, tt->ipv6=1, tt->did_ifconfig_ipv6_setup=1 Nov 8 15:45:17 openvpn[27202]: /usr/sbin/ip link set dev tun0 up mtu 1500 Nov 8 15:45:18 openvpn[27202]: /usr/sbin/ip addr add dev tun0 178.132.77.33/26 broadcast 178.132.77.63 Nov 8 15:45:18 openvpn[27202]: /usr/sbin/ip -6 addr add 2a03:8600:1001:4010::101f/64 dev tun0 Nov 8 15:45:18 openvpn[27202]: Linux ip -6 addr add failed: external program exited with error status: 254 Nov 8 15:45:18 openvpn[27202]: Exiting due to fatal error Any ideas are most welcome!

  Read the article

• connect() failed (111: Connection refused) while connecting to upstream

  - by Burning the Codeigniter

  I'm experiencing 502 gateway errors when accessing a PHP file in a directory (http://domain.com/dev/index.php), the logs simply says this: 2011/09/30 23:47:54 [error] 31160#0: *35 connect() failed (111: Connection refused) while connecting to upstream, client: xx.xx.xx.xx, server: domain.com, request: "GET /dev/ HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "domain.com" I've never experienced this before, how do I do a solution for this type of 502 gateway error? This is the nginx.conf: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } #mail { # # See sample authentication script at: # # http://wiki.nginx.org/ImapAuthenticateWithApachePhpScript # # # auth_http localhost/auth.php; # # pop3_capabilities "TOP" "USER"; # # imap_capabilities "IMAP4rev1" "UIDPLUS"; # # server { # listen localhost:110; # protocol pop3; # proxy on; # } # # server { # listen localhost:143; # protocol imap; # proxy on; # } #}

  Read the article

• 5.5.0 smtp;554 transaction failed spam message not queued

  - by Miguel

  Some users are trying to send email to certain domains using Exchange Server 2003, but the message is always is rejected and the following message is shown: 5.5.0 smtp;554 Transaction Failed Spam Message not queued The IP is not in a black list (checked using http://whatismyipaddress.com/blacklist-check and is clean - not listed). The emails were checked using using smtpdiag ("a troubleshooting tool designed to work directly on a Windows server with IIS/SMTP service enabled or with Exchange Server installed") and the connection using port 25 is ok. Also, an nslookup with set type=ptr shows (names and IP changed, "" means I typed something): C:\Documents and Settings\administrator>nslookup Default Server: publicdns.isp.net Address: 10.10.10.10 > server publicdns.isp.net Default Server: publicdns.isp.net Address: 10.10.10.10 > set type=ptr >mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 mydomain.com primary name server = publicdns.isp.net responsible mail addr = root.isp.net serial = 2011061301 refresh = 10800 (3 hours) retry = 3600 (1 hour) expire = 604800 (7 days) default TTL = 86400 (1 day) > 20.21.22.23 Server: publicdns.isp.net Address: 10.10.10.10 23.22.21.20.in-addr.arpa name = mail.mydomain.com 20.21.in-addr.arpa nameserver = publicdns.isp.net 20.21.in-addr.arpa nameserver = publicdns2.isp.net publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 Server: publicdns.isp.net Address: 10.10.10.10 23.22.21.20.in-addr.arpa name = mail.mydomain.com 20.21.in-addr.arpa nameserver = publicdns.isp.net 20.21.in-addr.arpa nameserver = publicdns2.isp.net publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 > set type=mx > mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 mydomain.com MX preference = 10, mail exchanger = mail.mydomain.com mydomain.com nameserver = publicdns.isp.net mydomain.com nameserver = publicdns2.isp.net mail.mydomain.com internet address = 20.21.22.23 publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 > set type=a > mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 Nombre: mydomain.com Address: 20.21.22.23 When I test the spf record with http://www.mxtoolbox.com it shows: TXT mydomain.com 24 hrs v=spf1 a mx ptr ip4:20.21.22.23 mx:mail.mydomain.com -all Any clues of what's happening here?

  Read the article

• gunicorn + django + nginx unix://socket failed (11: Resource temporarily unavailable)

  - by user1068118

  Running very high volume traffic on these servers configured with django, gunicorn, supervisor and nginx. But a lot of times I tend to see 502 errors. So I checked the nginx logs to see what error and this is what is recorded: [error] 2388#0: *208027 connect() to unix:/tmp/gunicorn-ourapp.socket failed (11: Resource temporarily unavailable) while connecting to upstream Can anyone help debug what might be causing this to happen? This is our nginx configuration: sendfile on; tcp_nopush on; tcp_nodelay off; listen 80 default_server; server_name imp.ourapp.com; access_log /mnt/ebs/nginx-log/ourapp-access.log; error_log /mnt/ebs/nginx-log/ourapp-error.log; charset utf-8; keepalive_timeout 60; client_max_body_size 8m; gzip_types text/plain text/xml text/css application/javascript application/x-javascript application/json; location / { proxy_pass http://unix:/tmp/gunicorn-ourapp.socket; proxy_pass_request_headers on; proxy_read_timeout 600s; proxy_connect_timeout 600s; proxy_redirect http://localhost/ http://imp.ourapp.com/; #proxy_set_header Host $host; #proxy_set_header X-Real-IP $remote_addr; #proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; #proxy_set_header X-Forwarded-Proto $my_scheme; #proxy_set_header X-Forwarded-Ssl $my_ssl; } We have configure Django to run in Gunicorn as a generic WSGI application. Supervisord is used to launch the gunicorn workers: home/user/virtenv/bin/python2.7 /home/user/virtenv/bin/gunicorn --config /home/user/shared/etc/gunicorn.conf.py daggr.wsgi:application This is what the gunicorn.conf.py looks like: import multiprocessing bind = 'unix:/tmp/gunicorn-ourapp.socket' workers = multiprocessing.cpu_count() * 3 + 1 timeout = 600 graceful_timeout = 40 Does anyone know where I can start digging to see what might be causing the problem? This is what my ulimit -a output looks like on the server: core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 59481 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 50000 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 1024 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

  Read the article

• CentOS 5.7 keeps rebooting after fresh installation

  - by Wagner Maestrelli

  I have just installed CentOS 5.7 x86_64 on a new computer. The installation went on without any issues. But, after it finnished, the machine started to show an awkward behaviour: it restarts every time it tries to boot. It happens after all the services have been started. The screen just goes black and it shows an error message from the monitor: Input not supported. And then it reboots. I took a look at the logs, but I couldn't manage to find anything. Any help? Update Before doing the hardware diagnosis, as pointed out, I decided to make some tests. First, I changed the runlevel to 3, adding the 3 parameter at the end of the kernel command. Then, after logging in in text mode, I checked the xorg.conf file out for some problems regarding the screen resolution. There was nothing unexpected set. Well, if there had to be a problem with it, I couldn't start the X server at the command line, right? So, I typed startx and Gnome started! So, probably, it's not an issue with the screen resolution, I suppose. Then I selected the Log Out root... Gnome menu option and something odd happened: the screen went black, the Input not supported monitor error message was displayed and the system rebooted. Yes, the same problem I was having while trying to boot! After that, I decided to try yet another test: I removed the rhgb quiet parameters from the kernel command to see if some error would show up. Well, to my surprise, the boot went on without problems! The Gnome login screen showed up, I logged in and the session started. But then I selected the Shut Down... menu option and guess what? Same problem: black screen, same monitor error and the system rebooted. Yes, it rebooted, it did not shut down. I repeated both of the tests and the behaviours were the same. I really don't know what's going on. It seems to be an issue regarding the changing of the screen mode or something like that. Any ideas? Could this be a hardware problem? Or does it seem to be something regarding the system configuration?

  Read the article

• HP F2180 driver installation fails on 64-bit Windows 7

  - by Noam Gal

  Hello; I am trying to install the HP Deskjet AIO (non-network) driver on my machine, which is running the 64-bit version of Windows 7. Before installing it, Windows detected my printer just fine... But I wanted to use the HP scanning application, because tt allows me to scan several photos at once. I ran the DJ_AIO_NonNetwork_ENU_NB file I got from their site, and the installation went almost without a problem... However, at the part where it should have detected the printer, it didn't, so I skipped it - telling the installer I'll connect the printer later. After it was finished I was able to use it regularly, and also scan using the wanted HP application. However, the installer kept popping at random intervals, and giving me an error message. Yesterday I tried removing all the installed HP Applications, and installing from scratch. Running the same installer setup, it now insists that it does not support my operating system, and that 64-bit Vista is the highest it can go... I just don't understand why this is occuring all of the sudden. Has anybody here successfully installed the AIO driver on the 64-bit version of Windows 7? UPDATE: Been chatting with HP chat support over the weekend. Managed to really mess up my windows. At first, they told me to uninstall using an "unintall_l3" batch file inside their installer package, and then reinstall. Didn't work. Also the "l4" batch didn't make any difference. Afterwards I was told to install "Windows install clean up" and remove many hp entries (most of which were not listed on my computer), and I also removed many other hp entries I bumped upon. Then my office 2k7 started failing. I searched around the web, and ran Security Restore, so now my office works, but my windows explorer is all buggy - can't seem to open windows explorer - it hangs while trying to load my hard drives, or completely ignores them and just shows my libraries. Anyone here has any idea how I can restore my win7 to normal, with or without the annoying scanner? UPDATE 2: Ok - explorer back to normal. I guess I just had to wait until it finishes searching while opening the windows explorer for the first time after the Security Restore. Scanner still not working though.

  Read the article

• Safer RAID5 rebuilds using partially failed disks?

  - by arcticmac

  There have been lots of articles posted recently about how RAID5 is dangerous because of long resilver times, and in particular because of increasing chances of encountering a URE during the resilver. Obviously this is a significant concern. However, it seems that in many cases of interest (as long as you're keeping some kind of eye on your disks), when it comes time to rebuild the array, the disk that I'm replacing is still mostly readable. If you try to explain this predicament to the average layperson, they are typically very confused as to why you have two almost completely functional disks but can't produce one working array. It seems to me that there ought to be some way to take advantage of this to make rebuilds safer, as long as I'm willing to have the RAID5 be read-only for a couple of days while it rebuilds. Conceptually, what I have in mind looks something like this: When a disk fails, immediately take the RAID5 offline or mount it read-only Attach a new disk (either in a spare bay, or externally via eSATA) and begin rebuilding it to replace the failed one. If known, perhaps start with the stripes in which the failure occurred, to minimize the chances of losing those if another disk fails. In the event that a second disk experiences a URE or other failure during the rebuild, try to source that data from the disk that is being replaced. Presumably if this happens, more rebuilding would be necessary. When complete, shut down the server, swap the replacement drive into the original bay if desired, and bring the array back up. Obviously such a process would not be appropriate for applications where uptime is critical or data loss cannot be tolerated, but it seems to me that this could help considerably to improve the reliability of RAID5. I assume that there's not a good way to implement a recovery like this at present, given that I haven't seen any indication of tools that are designed to do this, and that it seems like it would be rather obtuse to work out manually. Are there also technical issues with it that I haven't thought of (I'm still fairly new to RAID stuff)? Any thoughts on how hard something like this would be to implement (e.g. in linux md raid)?

  Read the article

• inews failed: "No colon-space in "X-MS-TNEF-Correlator:"

  - by wolfgangsz

  We run a news server for our engineering teams, which is also linked to the code repositories (so that all engineers can subscribe to any changes in the repos or just the projects they are interested in). On quite a regular basis (several times a day) I (as the sysadmin for that server) receive bounces from innd with the above as the first line. The news server simply rejects these messages and the articles don't get posted. Here is an example: inews failed: inews: cannot send article to server: 441 437 No colon-space in "X-MS-TNEF-Correlator:" header inews: article not posted -------- Article Contents Path: aminocom.com!ctaylor From: [email protected] (Cameron Taylor) Newsgroups: amino.qa.reports Content-Language: en-US Content-Type: multipart/alternative; boundary="_000_A2AB95742ADD524795C13EDE8F8CCD201A798C0Eukswaex01_" MIME-Version: 1.0 Subject: [QA REPORT] MDK 400 release 3.4.33 **PRE-RELEASE** Message-ID: Date: Thu, 9 Sep 2010 16:15:16 +0000 X-Received: from uk-swa-ex02.aminocom.com (uk-swa-ex02.aminocom.com [10.171.3.10]) by theoline.aminocom.com (8.14.3/8.13.8) with ESMTP id o89GF8tx019494 for ; Thu, 9 Sep 2010 17:15:08 +0100 X-Received: from uk-swa-ex01.aminocom.com ([10.171.3.9]) by uk-swa-ex02 ([10.171.3.10]) with mapi; Thu, 9 Sep 2010 17:15:18 +0100 X-To: QA Reports X-Thread-Topic: [QA REPORT] MDK 400 release 3.4.33 **PRE-RELEASE** X-Thread-Index: ActQOjBdms0CSJsORNSxRIMSZ4H3Ow== X-Accept-Language: en-US, en-GB X-MS-Has-Attach: X-MS-TNEF-Correlator: X-Auto-Response-Suppress: DR, OOF, AutoReply --_000_A2AB95742ADD524795C13EDE8F8CCD201A798C0Eukswaex01_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable SQA Test Report [QA REPORT] MDK 400 release 3.4.33 **PRE-RELEASE** Status .... (rest of the message is not important) And yes, quite clearly this header doesn't have anything after the colon. The man page for innd doesn't specify why it rejects these messages, it just says it rejects them. So far I have found out these headers are linked to messages in RTF format (coming from Outlook clients), where normally the formatting information would be stored in a winmail.dat attachment. The clients all use MS Exchange 2010 servers to send their mail (identified above as uk-swa-ex02.aminocom.com) which forwards the message to the news server. Does anybody know what advice I need to give these users to avoid their articles getting bounced? Or can I change the behaviour of innd? Or do I need to filter these headers out before innd processes the articles?

  Read the article

• Nvidia Drivers on Debian / Lenny (Stable) -> Installation successful -> Monitors gets black

  - by David

  I have successfully installed the proprietary drivers for my nvidia (geforce 7300 gt) graphics card on debian/lenny. I know its not the best way to chose for driver installation ( see this link: http://wiki.debian.org/NvidiaGraphicsDrivers#non-freedrivers ). but the two ways seem to be possible for me (nvidia-kernel module compilation). Now the problem is that the monitors gets black, the power light starts blinking after i launch the x-server. Have a short look a the logs (output truncated from /var/log/Xorg.0.log): (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) Jul 28 17:10:11 NVIDIA(0): Enabling RENDER acceleration (II) Jul 28 17:10:11 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Jul 28 17:10:11 NVIDIA(0): enabled. (II) Jul 28 17:10:11 NVIDIA(0): NVIDIA GPU GeForce 7300 GT (G73) at PCI:1:0:0 (GPU-0) (--) Jul 28 17:10:11 NVIDIA(0): Memory: 262144 kBytes (--) Jul 28 17:10:11 NVIDIA(0): VideoBIOS: 05.73.22.25.00 (II) Jul 28 17:10:11 NVIDIA(0): Detected PCI Express Link width: 16X (--) Jul 28 17:10:11 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Jul 28 17:10:11 NVIDIA(0): Connected display device(s) on GeForce 7300 GT at PCI:1:0:0: (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS (II) Jul 28 17:10:11 NVIDIA(0): Assigned Display Device: CRT-0 (==) Jul 28 17:10:11 NVIDIA(0): (==) Jul 28 17:10:11 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) Jul 28 17:10:11 NVIDIA(0): will be used as the requested mode. (==) Jul 28 17:10:11 NVIDIA(0): (II) Jul 28 17:10:11 NVIDIA(0): Validated modes: (II) Jul 28 17:10:11 NVIDIA(0): "nvidia-auto-select" (II) Jul 28 17:10:11 NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) Jul 28 17:10:11 NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config (--) Jul 28 17:10:11 NVIDIA(0): option (==) Jul 28 17:10:11 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp Here is the complete /etc/X11/xorg.conf file as generated by nvidia-xconfig: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" Hor

  Read the article

• Reinstall Acer OEM Windows 8, Windows 8 Recovery for Acer Aspire V5 122p

  - by stwindr

  My Acer Aspire V5-122P-61456G50NSS, model - MS2377, has crashed all together. It came preloaded with Windows 8 and I upgraded to windows 8.1 3-4 days before crash. Unfortunately I did not make any recovery media before the crash. While accessing the eRecovery on Acer store with my PC's serial no. it says nor RCD available for this. I tried recovery by loading recovery manager (Left Alt + F10) Various other advanced startup options (like holding shift key while turning on or pressing F8 key) returns nothing but no luck. However I am able to enter BIOS. After doing research on above condition on various PC forums, now my questions: I read that a 'Windows Recovery Drive' can be made on any PC running Windows 8 and could be used to repair another PC. Does anybody in SuperUser community have that (or a link to download the same from somewhere? as I'm unable to find anybody running windows 8 among my friends). I downloaded a window 8 Pro ISO and made a bootable USB. I was able to go to 'Repair Your Computer' option and after going to 'Reset your PC' option found that my recovery partition has gone/missing. I tried all options available but no luck. Then I tried to install with that Windows 8 Pro ISO but got message: "The product key entered does not match any of the Windows images available for installation. Enter a different product key". before this message I did not got any form to fill product key! Does this mean that the installer was picking up the key from BIOS (OEM Key)? and may be the installation did not succeeded because OEM Windows version was Window 8 and I was trying to install Windows 8 Pro. If that is the case then, could somebody please send me link to download an Windows 8 ISO? I am helpless and couldn't find anywhere on internet (without having to pay for a new key, but I should not pay as the installer will use OEM key).

  Read the article

• SQL Server 2005 SP3 on Windows 7 - No Management Studio

  - by Mike Thomas

  I've been trying for a day and a half now to get SQL Server 2005, DEV edition, to work on Windows 7, 64 bit prof. I install from the disk, then run SP 3. I get a failure on the Client Components section of the Installation Progress along with this vague message - Product : Client Components Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQLTools9_Hotfix_KB955706_sqlrun_tools.msp.log Error Number : 1712 Error Description : MSP Error: 1712 One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible. I've uninstalled all Visual Studio and tried to make this as clean as possible, and have read a lot of the blog posts, but am really at my wits end about this. I am not a DBA, but I use SQL Server all the time when coding and testing apps. Does anyone have any ideas as to where I can get this sorted out? I've been ati this for a long time and have never encountered an installation as bad as this one. Thanks Mike Thomas

  Read the article

• How do I install the latest version of packages in Ubuntu?

  - by Roman

  For example I want to install the latest version of "numpy". I type the following: "sudo apt-get install python-numpy". When I type this the first time it installs something and if I type this the second time it writes that I have already the latest version of numpy. However, I see that my version of numpy is 1.1.1. and I know that it NOT the latest version. Why it happens and how this problem can be solved? I can find the *tar.gz file with the latest version, I can extract files with the archive and than I need to rune one of the scripts which will be somewhere among the extracted files. But I do not like this way. It is too complicated. I do not know where I should put all these files, I do not know which dependencies I should install before I run the script for the installation of numpy, I do not know where numpy will be put after installation and so on. Is there an easy way to get the latest version of numpy?

  Read the article

• Group Policy Software Installs Too Silent on Windows 7

  - by jonblock

  I'm trying to migrate a Windows XP deployment process to Windows 7. The process has been surprisingly smooth, after figuring out how to bring up a base system. We rely heavily on Group Policy software installation, which in XP can mean long periods on any given morning sitting around watching the machine install new updates. At least the typical Windows Installer message shows the user that something is indeed happening. As far as I can tell, Windows 7 retains the startup installation process (good), but eliminates the on-screen message to indicate what's happening (bad). All a user will see, possibly for a half-hour or more if they haven't restarted for a while, is the electric hamster wheel and the words "Please wait...". I forsee a significant increase in support calls... If you're familiar with msiexec.exe parameters, XP behaves like /qb-, and 7 behaves like /qn. I want the /qb- behavior back. Is there a way to re-enable the Windows Installer notices for Group Policy startup installations?

  Read the article

• RHEL 5.2 installing on ProLiant BL460c - hangs at 'now booting the kernel'

  - by Dr Rocket Mr Socket

  As the title states, I have a problem. This server and the installation disc are also on the other side of the world to me so... So far, I have tried to start the install with the parameters: linux text noapic noacpi no=apic no=acpi which results in the same hang. I have also disabled a PCI ethernet adapter, I am uneasy about disabling the onboard ethernet adapter I do not know if ILO uses this. Anyone have any advice? Much appreciated. EDIT: full output after trying to begin the installation. boot: linux text Loading initrd.img.................. Loading vmlinuz....... Uncompressing Linux...done. Now booting the kernel stays on this for hours EDIT2: adding the 'mem=40960M' (server has 40 gigs of ram) parameter allows it to proceed but the following output directly after 'Now booting the kernal' Memory: sized by int13 0e801h initrd extends beyond end of memory (0x00ef2090 > 0x00000000) disabling initrd Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory Structure at 0x000ffee0 pcibios_init : BIOS32 Service Directory entry at 0xf0000

  Read the article

• Problems installing GIT on Ubuntu through SSH

  - by jamadri

  I'm having trouble installing git using this command: sudo apt-get install git-core It's giving me the problems below and I'm not quite sure how to get this to work correctly. I try running sudo apt-get update and after it just gives me problems. If anyone knows how to solve this or a possible way of getting GIT on your machine differently it would be of much help. I've never had a problem with using apt-get. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! liberror-perl git-core patch Install these packages without verification [y/N]? y Err http://us.archive.ubuntu.com jaunty/main git-core 1:1.6.0.4-1ubuntu2 404 Not Found [IP: 91.189.92.183 80] Err http://us.archive.ubuntu.com jaunty/main patch 2.5.9-5 404 Not Found [IP: 91.189.92.183 80] Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/main/g/git-core/git-core_1.6.0.4- 1ubuntu2_amd64.deb 404 Not Found [IP: 91.189.92.183 80] Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.5.9- 5_amd64.deb 404 Not Found [IP: 91.189.92.183 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Anything reply that can help fix this would be helpful. I'm not sure if it's the git servers or my connection that might be the problem. I've used apt-get to pull other things, it's just failing with git.

  Read the article

• How can I backup entire installations of a program, instead of just manually backing up individual f

  - by NoCatharsis

  It seems pretty straightforward to backup individual files, such as pictures, saved games, or settings files - just copy them straight over to your 2nd HDD or to an online service like DropBox. However, is there any way to backup entire installations of a program? For instance, my Firefox directory has a lot of personal customizations and add-ons. I don't want to go through each item and decide to back it up or let it go. So my next option is to copy out the entire directory for backup. But, if I copy the entire directory back onto the HD after a format, it is not an integrated installation and this seems like it could be troublesome. I would assume Windows cannot detect the directory for uninstallation, or would not let you choose Firefox as your default browser, right? I'm no pro, but this sounds like a bad idea. So my question is whether there is a good way to preserve all necessary files, while also preserving the full installation process of an application. This is not specific to Firefox - I would like to know how to do this for any application. Thank you.

  Read the article

• Windows 7 Install: No drives were found

  - by Albert Bori

  I was building a computer for my wife with an older SATA hard drive that I had lying around, and when attempting to do a new install of Windows 7 on it, the installer says: "No drives were found. Click Load Driver to provide a mass storage driver for installation." I ran the diskpart command: list volume, and it showed up as "Raw". So, I formatted it to NTFS and then it showed up as a healthy drive in diskpart. I also ran check disk on it with no errors. Windows 7 installer STILL can't find the drive. As far as BIOS settings, I have tried "Native IDE", AHCI, and Both AHCI/IDE mode (SATA slots 0-2 AHCI, 3-4 IDE). I tried all combinations... still "no drives were found". At this point, I'm just scratching my head. Using the installation dos window, I can see and talk to the drive just fine, but the installer just doesn't see it at all. I've even written folders and files to the drive, and it still "can't be seen". Any help would be great. Items of interest: Motherboard model: Gigabyte GA-A75M-UD2H - BIOS Version F5 (latest) Hard drive model: 80GB Seagate Barracuda 7200.7 ST380817AS (no other drives) Installing Windows 7 using a FAT32 formatted USB Drive, which I've used for other installs

  Read the article

• My yum repository able to search packages, but not able to install it in RHEL?

  - by mandy

  I set up yum from dvd. Following is the containts of my .repo file: [dvd] name=Red Hat Enterprise Linux Installation DVD baseurl=file:///media/dvd enabled=0. I'm able to search packages. However while installation I'm getting below error: [root@localhost dvd]# yum install libstdc++.x86_64 Loaded plugins: rhnplugin, security This system is not registered with RHN. RHN support will be disabled. Setting up Install Process Nothing to do My Yum Search output: [root@localhost dvd]# yum search gcc Loaded plugins: rhnplugin, security This system is not registered with RHN. RHN support will be disabled. ============================================================================= Matched: gcc ============================================================================= compat-libgcc-296.i386 : Compatibility 2.96-RH libgcc library compat-libstdc++-296.i386 : Compatibility 2.96-RH standard C++ libraries compat-libstdc++-33.i386 : Compatibility standard C++ libraries compat-libstdc++-33.x86_64 : Compatibility standard C++ libraries cpp.x86_64 : The C Preprocessor. libgcc.i386 : GCC version 4.1 shared support library libgcc.x86_64 : GCC version 4.1 shared support library libgcj.i386 : Java runtime library for gcc libgcj.x86_64 : Java runtime library for gcc libstdc++.i386 : GNU Standard C++ Library libstdc++.x86_64 : GNU Standard C++ Library libtermcap.i386 : A basic system library for accessing the termcap database. libtermcap.x86_64 : A basic system library for accessing the termcap database. Please guide me on this, I want to install gcc on my RHEL.

  Read the article

• Problem with ubuntu 10.10 running from USB drive

  - by Surjya Narayana Padhi

  I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

  Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >