Search Results

Search found 6069 results on 243 pages for 'ftv admin'.

Page 99/243 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

• Issue with Netgear GS108T Managed Switch and Jumbo Frames

  - by Richie086

  I recently purchased a Netgear GS108T managed switch and I am trying to configure jumbo packets between my NAS (Thecus N4100Pro), PC and managed switch. I should mention the fact that I was able to use jumbo frames between my PC and NAS before I purchased the switch without issue. My Desktop has a wired gigabit NIC (Intel 82579V Gigabit) and has the ability to configure jumbo frames (see pic) that are either 9014 bytes or 4088 bytes. I choose 9014 bytes for the jumbo frame size My NAS supports jumbo frames as well, and is configured to use 9014 as the frame size. When I go into my Netgear managed switch and set the frame size to 9014 on the ports I am using for my PC and NAS. See image As soon as I hit apply in the web interface, I loose my connection to the SMB shares on my NAS and I can no longer connect to the web admin interface for my NAS. The really strange thing is I can ping my NAS via the ping command, but when I try to connect to the web interface on port 80 or port 443 the page never loads. I did a scan from my PC to my NAS using nmap and I can see the following ports open PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 631/tcp open ipp 2000/tcp open cisco-sccp 2049/tcp open nfs 3260/tcp open iscsi 49152/tcp open unknown MAC Address: 00:14:FD:15:00:44 (Thecus Technology) Read data files from: C:\Program Files (x86)\Nmap Nmap done: 1 IP address (1 host up) scanned in 211.97 seconds Raw packets sent: 1 (28B) | Rcvd: 1 (28B) Anyone have any idea what is going on here? Why is nmap able to detect the ports are open and listening for http, https and file sharing but I cant connect when all devices have jumbo packets enabled? Stranger still - I did a packet capture using wireshark while the nmap scan was running and filtered so I only saw converstations between my PC and my NAS. Here are the packet details from my scan Only 4 packets over 5k bytes? What is going on here? Do I not need to configure jumbo frame sizes on the switch? I have an internet connection from my pc to the switch to my router - I just cannot connect to my NAS. I just checked on my iPhone and I am able to open my NAS web admin interface without issue on my iPhone! WTF!!!!!! Let me know if you need more details..

  Read the article

• Recover sharepoint after uninstall project server

  - by David Owen

  I have a big, big problem. After uninstall project server for sharepoint 2010, it doesnt start any page or the central admin page, looking here http://www.sharepointboris.net/2011/10/disaster-recovery-after-uninstalling-project-server-2010/ will got the solution but I can´t remember the passphrase, there is some way to recover it and finish the sharepoint restoration? Thank for your in-time answers

  Read the article

• Static build ffmpeg 0.8

  - by Riduidel

  Is there anywhere an available static build of ffmpeg with all encoder/decoders libs for Linux (not a source tarball, but a binary) ? Although this question seems trivial, I spent the last half hour looking for it, without any success. EDIT I'm looking for binary to be run on x86 Suse 10 systems. Notice I can't use local package manager as all update repositories have bene removed by admin (to avoid uncontrolled software update).

  Read the article

• Active Sync Login Time Restriction

  - by Hovaness Bartamian

  Is there any other location restricting a user from accessing their emails from their phone using active sync, besides on a domain controller -active directory-user properties - account - logon hours. The user's logon hours are allowed all the time. To add to the mystery the user is an admin on the domain.(He seems not to be able to get emails from 7:00pm to 8:00pm) Its a Windows 2003 Server environment. Thanks for any help ahead of time.

  Read the article

• How do I restart a certain app pool on IIS remotely via a command line?

  - by AngryHacker

  I am an admin on the box and would like to stop/start a certain app pool without having to log into the box. Is there a command line to do this task?

  Read the article

• OSX Server & Client NFS "timeout" issues?

  - by user36659

  I have a mac environment our server is sharing an NFS mount Setup via Server Admin. Clients connect to the NFS mount at boot via The Directory Utility built into OSX... Everything works fine with one small exception, the NFS mount seems to timeout/dropout every now and then it seems random and requires a reboot to bring it back up? Has anyone else ran into this situation? Any fix would be appreciated.

  Read the article

• How to install ADFS 3.0 in standalone mode?

  - by user18044

  I've installed Windows 2012 R2 and enabled the ADFS (3.0?) feature. After installation, it asks to configure ADFS, but this step requires a user account that is a domain administrator, as it wants to create certificate containers and SPN records. In ADFS 2.0, you could install in standalone mode which required only local admin rights, storing everything in the Windows Internal Database. If this still possible with the latest version? If so, how do I configure ADFS in standalone mode?

  Read the article

• How do I properly uninstall a package installed via Plesk Autoinstaller?

  - by Gaia

  A) I installed atmail on plesk via "/usr/local/psa/admin/bin/autoinstaller --select-release-id=current" B) i decided not to use atmail. so i did "webmailmng --disable --name=atmail" and "webmailmng --remove --name=atmail" whats the last(?) step here to completely reverse A and properly uninstall atmail? thanks!

  Read the article

• SQLyog alternative

  - by JohnM2

  Do you know any app similar to SQLyog (sql gui admin tool)? Especially, I am looking for opinion from users who had used SQLyog and found "something better".

  Read the article

• Zimbra mail server: Changing max message size problem

  - by s4uadmin

  Hello, We are having some issues with changing the maximum message size in zimbra We followed the instructions given on the zimbra wiki zimbra@ZIM1:~$ zmprov modifyConfig zimbraMtaMaxMessageSize 2048000 zimbra@ZIM1:~$ postfix reload postfix/postfix-script: refreshing the Postfix mail system zimbra@ZIM1:~$ postconf | grep message_size_limit message_size_limit = 10240000 Strange thing: The setting displayed in the admin page does change but not to the corresponding size (2000kb) It would be much appreciated if someone can help us. Grtz, Thomas

  Read the article

• Win 2003 Terminal Server, Logoff Domain Users after 30 mins

  - by Kabir Rao

  We have a terminal server in our environment, where Domain\Domain Users can login through Remote Desktop. We want to force log off these users after half an hour. However Administrators (this includes Domain\Domain Admin also) should not be affected by this. They should be able to connect to terminal server with out any interruption. Can somebody guide us about it. Thanks upfront Kabir

  Read the article

• Turning down the sound on a switched off user

  - by soandos

  If one switches users (i.e. user one switches off, and then another users logs in) and there is sound playing on the first user, that sound will continue to play for the second user. If the second user has admin rights, they can guess what program is causing the sound and then kill it, but that is very clumsy, and far more than what "needs" to be done. When I open the mixer, it just shows that sound is playing. How can I stop it?

  Read the article

• Auto populate Outlook with other users' calendars

  - by bduncanj

  In Outlook 2007, when in Calendar view, there's a category (group) of calendars on the left hand bar titled "People's Calendars". We're migrating from a system where all employees have access to read and write to all other employees' calendars (via a 3rd party Web Calendar). Is it possible, from an admin level, to auto-populate this People's Calendars category in everyone's Outlook with all the employees in the company, and grant everyone read / write access to everyone else's calendars? (Running Exchange 2010) Thanks, Duncan

  Read the article

• Is it possible to do DNS-based ACLs on a Cisco ASA?

  - by pickles

  Short of using static IP addresses, is it possible to have a Cisco ASA use a DNS name rather than an IP address? For instance, if I want to limit a host in the DMZ to access only one particular web service, but that web service might be globally load balanced or using DynDNS or cloud, how can the ACL be expressed so that a fixed IP address isn't used and the admin doesn't have to keep opening and closing down IP addresses?

  Read the article

• Varnish + Plesk : vhost broken

  - by Raphaël

  I have an e-commerce site with 300,000 products and 20,000 categories. It is slow and currently in production. I decided to install Varnish to speed up. The trouble is that during installation, I got a Guru Meditation. Since the site is in production, I am not allowed to leave this error more than a second, thinking to have made an enormous stupidity. I followed the following tutorial: http://www.euperia.com/linux/setting-up-varnish-with-apache-tutorial I'm sure I followed all without error. I say that there may be a specific configuration with plesk. Has anyone already installed Varnish on a ubuntu 11.04 server with plesk 10? Does anyone have a better resource? I know it is "very vague" as an error, but maybe some of you have had this problem. edit 24/11/2011 I continued to work on Varnish + Plesk ... but it still does not work. 1) I changed the port for apache in plesk General # mysql -uadmin -p`cat /etc/psa/.psa.shadow` -D psa -e'replace into misc (param, val) values ("http_port", 8008)' 1.1) I rebuild the server conf # /usr/local/psa/admin/bin/httpdmng --reconfigure-all 2) I changed the apache conf files (if those were not taking full plesk top) vim /etc/apache2/ports.conf NameVirtualHost *:8008 Listen 8008 2.1) I do the same with /etc/apache2/sites-enables/000-default 3) I changed the port of my vhost (a single server) vim /var/www/vhosts/MYDOMAIN.COM/conf/XXXXXXXXX.http.include Replace the port 80 by this I want. Rebuild the vhost conf /usr/local/psa/admin/sbin/websrvmng --reconfigure-vhost --vhost-name=<domain_name> with without www (See my issue in serverfault: Edit vhost port in plesk 10.3 ) 4) I installed varnish by following this tutorial : http://www.euperia.com/linux/setting-up-varnish-with-apache-tutorial 5) I restart apache 2 + varnish service apache2 restart service varnish restart When I go to my site, I come across a page of apache It works! This is the default web page for this server. The web server software is running but no content has been added, yet. Can somebody help me ? This means that my vhost does not point to the right place. Why? What to do? How?

  Read the article

• Anyone know the default password on a Lexmark 4600 MFP?

  - by Chad

  Just opened the package, greeted with an admin screen. The password isn't blank and nothing I can see in the user manual... Google searches seem to turn up nothing either.

  Read the article

• MySQL as a simple Mac application for development

  - by Thilo

  What is the easiest way to run MySQL for development purposes on the Mac? Ideal would be a server embedded in a Mac application, that starts when you press a start button, and stops when you quit the app? I do not need a background service running, I do not want to have to be an admin user to install or run, I do not want files spread out all over the disk (everything should be in the App bundle and the Documents folder).

  Read the article

• Connecting two Windows XP with MSMQ

  - by NealWalters

  I have MSMQ installed on two Windows XP computers. Can I configure them to pass messages back and forth, or do I need an MSMQ server in the middle? If I need an MSMQ server, does the normal MSMQ with Win2003 able to act as that? And then, how do I connect my Windows XP to that Windows 2003 server? Is it a) On screen admin dialog in the MSMQ plug-in to MMC, b) a config file, c) Active Directory, d) something else? Thanks, Neal Walters

  Read the article

• In Apache, how do I set up password protection?

  - by rphello101

  I'm attempting to set up a server using Apache. In the conf file, I inserted the code: <Directory /> Options FollowSymLinks AllowOverride AuthConfig AuthType Basic AuthName "Restricted Files" AuthBasicProvider file AuthUserFile C:\...\serverpass.txt Require user Admin </Directory> In order to try and get Apache to require a password. I created the username and password with htpasswd -c. When I got to localhost though, it doesn't prompt me for a username and password?

  Read the article

• Logging in as the same user multiple times in Remote Desktop Windows Server 2008

  - by Little_Johnn

  Quick question: I have a situation where I need to let multiple people on different PCs log into one server 2008 machine as administrator simultaneously over remote desktop. I have the CALs for it, it's just not set up correctly. When one user tries to log in, it boots the other out. What I need is to present to them a different session, just each as logged in as admin. Sorry for the slightly rambling post, I'm new here. Thanks!

  Read the article

• Configuring sudo to work without password

  - by aidan

  I'm trying to configure sudo to allow all users to restart apache without having to enter a password. Security concerns aside, why isn't this working? I added the line to /etc/sudoers: %admin ALL=NOPASSWD: /usr/sbin/apache2ctl $sudo -l User aidan may run the following commands on this host: (root) NOPASSWD: /usr/sbin/apache2ctl (ALL) ALL $sudo /usr/sbin/apache2ctl [sudo] password for aidan: Thanks for any help.

  Read the article

• Setting up SSL on apache on linux ubuntu

  - by ThomasReggi

  I'm trying to get SSL to run on my apache web server. I do not have the DNS for the domain setup yet is that an issue? How do I setup SSL on my web server? When I start apache it fails. root@vannevar:/etc/apache2/ssl# service apache2 start * Starting web server apache2 Action 'start' failed. The Apache error log may have more information. The log stats that it's unable to read the certificate. [Thu Jun 28 15:01:02 2012] [error] Init: Unable to read server certificate from file /etc/apache2/ssl/www.example.com.csr [Thu Jun 28 15:01:02 2012] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag [Thu Jun 28 15:01:02 2012] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error The contents of /etc/apache2/httpd.conf ServerName [SERVERIP] The contents of /etc/apache2/ports.conf # If you just change the port or add more ports here, you will likely also # have to change the VirtualHost statement in # /etc/apache2/sites-enabled/000-default # This is also true if you have upgraded from before 2.2.9-3 (i.e. from # Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and # README.Debian.gz NameVirtualHost [SERVERIP]:443 NameVirtualHost *:80 Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> The contents of /etc/apache2/sites-available/www.example.com <VirtualHost *:80> ServerAdmin [email protected] ServerName example.com ServerAlias www.example.com DocumentRoot /srv/sites/example.com/public/ ErrorLog /srv/sites/example.com/logs/error.log CustomLog /srv/sites/example.com/logs/access.log combined </VirtualHost> <VirtualHost [SERVERIP]:443> SSLEngine On SSLCertificateFile /etc/apache2/ssl/www.example.com.csr SSLCertificateKeyFile /etc/apache2/ssl/www.example.com.key SSLCACertificateFile /etc/apache2/ssl/comodo.crt ServerAdmin [email protected] ServerName example.com ServerAlias www.example.com DocumentRoot /srv/sites/example.com/public/ ErrorLog /srv/sites/example.com/logs/error.log CustomLog /srv/sites/example.com/logs/access.log combined </VirtualHost>

  Read the article

• Dynamically set current domain in nginx with perl module

  - by Simone Margaritelli

  i know how to set variables and use subroutines with the nginx builtin perl module INSIDE a "server" directive but, what i need to do is to set/rewrite the current domain before ... let's say, we have a domain like admin.foobar.website.com i want that a request to foobar.othersite.com points to the first address ( obviously website.com and othersite.com are hosted on the same webserver running nginx :) ). For reasons i can't explain here, i can not use multiple server_name directive expressions, i have to do this before the server {} block, with perl or anyway possible. Thanks

  Read the article

• Administrator Password lost for a Win 2003 Server machine

  - by Nishant

  We have lost the admin password of a windows 2003 server machine which is used in out lab . Is there any way to make the system up and running without needing to reinstall the system now ? Rgds Nishant

  Read the article

• On Windows Vista administrator account how can I make a printer the default for all other accounts?

  - by Bill Rodman

  I "administer" a Windows Vista Home Premium machine for my brother's family. After installing a printer using my admin account, I then have to log in to each of the other accounts to set the printer as the default. Very tedious. Is there a a more automated way of doing this?

  Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >