Search Results

Search found 8384 results on 336 pages for 'laptop batteries'.

Page 99/336 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

  • PXE Boot not working

    - by Nishant
    Please explain the error in this screenshot DHCP Setting: This screenshot was taken after powering off the old comp hence he server interface is shown as the wireless card - it becomes 192.168.0.1 when I connect wires and power up the old laptop to boot via PXE. My scenario is simple. An old laptop and a new laptop . A cross over cable ( that I myself made from CAT 6 cable by cutting it and connecting 4 wires as mentioned in some doc). The new laptop ( tftp server ) has a Wirelss Card ( with which I am browsing and writing this ) . And the cable is connected between laptops . TFTP server ( new laptop details ) Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::f511:3d4a:ca01:122e%16 IPv4 Address. . . . . . . . . . . : 192.168.0.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.2 Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Achilles Link-local IPv6 Address . . . . . : fe80::99b1:8ae0:9e6c:f300%11 IPv4 Address. . . . . . . . . . . : 192.168.2.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.2.1

    Read the article

  • Pushing DNSSEC updates with offline keys

    - by eggyal
    In a non-professional capacity, I look after the DNS of some 18 domains: mostly personal/vanity domains for immediate family. I outsource the whole shebang to an inexpensive managed hosting provider with a web interface through which I manage the zones; since the provider also offers DNSSEC, I have successfully deployed that too. These domains are so unimportant that an attack targetted against them seems much less likely than a general compromise of my provider's systems, at which point the records of all their customers might be changed to misdirect traffic (perhaps with extremely long TTLs). DNSSEC could protect against such an attack, but only if the zone's private keys are not held by the hosting provider. So, I wonder: how can one keep DNSSEC private keys offline yet still transfer signed zones to an outsourced DNS host? The most obvious answer (to me, at least) is to run one's own shadow/hidden master (from which the provider can slave) and then copy offline-signed zonefiles to the master as required. The problem is that the only machine I (want to*) control is my personal laptop, which usually connects from a typical home ADSL (behind NAT over a dynamically-assigned IP address). Having them slave from that (e.g. with a very long Expiry time on the zone for periods when my laptop is offline/unavailable) would not only require a Dynamic DNS record from which they can slave (if indeed they can slave from a named host rather than a static IP address), but would also involve me running a DNS server on my laptop and opening both it and my home network up to the incoming zone transfer requests: not ideal. I would prefer a much more push-oriented design, whereby my laptop initiates transfer of offline-signed zonefiles/updates to the provider's servers. I looked into whether nsupdate could fit the bill: documentation is a little sketchy, but my testing (with BIND 9.7) suggests it can indeed update DNSSEC zones, but only where the server holds the keys to perform the zone signing; I have not found a way to have it take an update including the relevant RRSIG/NSEC/etc. records and have the server accept them. Is this a supported use-case? If not, I suspect the only solutions which could fit the bill will involve non-DNS-based transfer of the zone updates and would welcome recommendations that are supported by (hopefully inexpensive) hosting providers: SFTP/SCP? rsync? RDBMS replication? Proprietary API? Finally, what would be the practical implications of such a setup? Key rotation is jumping out at me as being an obvious difficulty, especially if my laptop is offline for extended periods. But the zones are extremely stable, so perhaps I could get away with long-lived ZSKs**...? * Whilst I could run a shadow/hidden master on e.g. an outsourced VPS, I dislike the overhead of having to secure / manage / monitor / maintain yet another system; not to mention the additional financial costs of so doing. ** Okay, this would enable a concerted attacker to replay outdated records—but the risk and impact of such are both tolerable in the case of these domains.

    Read the article

  • iPad Impressions

    - by Aaron Lazenby
    So, I spent some quality time with my new iPad on Saturday. Here are things I like/don't like: -- Don't like that it has to sync with iTunes before you use it: I was traveling and left my laptop at home thinking I'd use this iPad thing instead. But the first thing it asked me to do is connect it to a laptop. Ugh. Had to borrow my mother-in-law's MacBook Pro just to get the iPad rolling. -- Like that magazines and newspapers are forever changed: And I think for the better...it's why I bought this thing in the first place. I spent significant time with The New York Times, The Wall Street Journal, Time Magazine and Popular Science on the iPad. Sliding stories around, jumping from section to section, enlarging images = all excellent experiences. Actually prefer iPad magazine to print, which will require a major shift in editorial strategy, summed up by Popular Science's Mark Jannot in his editor's note "What defines a magazine? Curated expertise--not paper." -- Don't like the screwy human factors: I actually enjoy the virtual keyboard (although I think I'm in the minority), but you have to hunch over to look down at what you're typing. Bad technology ergonomics have already jacked my body in various ways. The iPad just introduced a new one.-- Like the multitouch: In fact, it's awesome. Hands down. Probably will have the most lasting impact on the personal computing industry as a whole.   -- Don't like that it's heavy: If you plan to read in bed, you'd better double up on the creatine and curls. Holding this thing up on your own gets pretty uncomfortable. -- Like the Netfilx app: I wanted to watch "The Big Lebowski," so I did. That is all. -- Don't like that people feel 3G is necessary: For $30 a month? Please. I'm already accustomed to limiting my laptop internet use to readily available free wi-fi. Why do I expect anything different with the iPad? Most anyplace I have time to sit and read/use a computer (cafe, airport, you house, library, etc.) has free wi-fi. I can live without web surfing in your car. That's what the iPhone is for. -- Don't like that not everyone was ready in day one: I'm looking at you Facebook. No iPad app for launch? Lame. iPhone apps scaled-up to work on the iPad look grainy and cheap. Not a quality befitting this beautiful $700 piece of glass.Verdict: I'm bringing it to COLLABORATE 08 and seeing if I can go the whole week using only the iPad. If I can trade this thing for my laptop, I know it's a winner. For now, I'm enjoying Popular Science.

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • GIT clone repo across local file system

    - by Jon
    Hi all, I am a complete Noob when it comes to GIT. I have been just taking my first steps over the last few days. I setup a repo on my laptop, pulled down the Trunk from an SVN project (had some issues with branches, not got them working), but all seems ok there. I now want to be able to pull or push from the laptop to my main desktop. The reason being the laptop is handy on the train as I spend 2 hours a day travelling and can get some good work done. But my main machine at home is great for development. So I want to be able to push / pull from the laptop to the main computer when I get home. I thought the most simple way of doing this would be to just have the code folder shared out across the LAN and do: git clone file://192.168.10.51/code unfortunately this doesn't seem to be working for me: so I open a git bash cmd and type the above command, I am in C:\code (the shared folder for both machines) this is what I get back: Initialized empty Git repository in C:/code/code/.git/ fatal: 'C:/Program Files (x86)/Git/code' does not appear to be a git repository fatal: The remote end hung up unexpectedly How can I share the repository between the two machines in the most simple of ways. There will be other locations that will be official storage points and places where the other devs and CI server etc will pull from, this is just so that I can work on the same repo across two machines. Thanks

    Read the article

  • How to use git to manage one codebase but have different environments

    - by emostar
    I'm using git for a personal project at the moment and have run into a problem of having one codebase for two different environments and was wondering what the cleanest way to use git would be. Main Desktop I Use this machine for most of my development. I have a git repository here that I cloned off of an empty repository that I use on my internal server. I do most of my work here and push back to the internal server so I can use that as a master of truth and to ease making backups. Laptop I sometimes want to code on the road, so I did a clone from the internal server and created a new branch called "laptop-branch". Unfortunately some directories MSVC++ version are different than from the Main Desktop environment. I just modified the files in the "laptop-branch" and committed them there. Now I did a lot of changes while on vacation with my laptop, and want to push them to origin, but don't want the changes I made that were related to directories and compiler versions to be pushed back to origin. What would be the best way to get this done?

    Read the article

  • Are Chromebooks the New Netbooks, and What Does That Mean?

    - by Chris Hoffman
    Netbooks — small, cheap, slow laptops — were once very popular. They fell out of favor — people bought them because they seemed cheap and portable, but the actual experience was lackluster. Most netbooks now sit unused. Windows netbooks have vanished from stores today, but there’s a new super-cheap laptop — the Chromebook. Chromebook sales numbers are impressive, but their usage statistics tell a different story. Are Chromebooks just the new netbook? The Problem With Netbooks Netbooks seemed appealing, especially in an age before tablets and lightweight ultrabooks. You could buy a netbook for $200 or so and have a portable device that let you get on the Internet. The name “netbook” spelled that out — it was a portable device for getting on the ‘net. They weren’t really that great. The original netbook was a lightweight Asus Eee PC that ran Linux alone and had a small amount of fast flash storage. Netbooks eventually ran heavier Windows XP operating systems — Windows Vista was out, but it was just too bloated to run on netbooks. Manufacturers added slow magnetic hard drives, bloatware, and even DVD drives! They couldn’t run most Windows software very well. The build quality was poor and their keyboards were tiny and cramped. People liked the idea of a lightweight device that let them get on the Internet and loved the cheap price, but the actual experience wasn’t great. Chromebook Sales Chromebook sales numbers seem surprisingly high. NPD reported that Chromebooks were 21% of all notebooks sold in the US in 2013. If you combine laptop and tablet sales into a single statistic, Chromebooks were 9.6% of all those devices sold. That’s 2/3 as many Chromebooks sold as iPads in the US! Of Amazon’s best-selling laptop computers, two of the top three are Chromebooks. These definitely look like successful products. Unlike netbooks, Chromebooks are taking off in a big way in the education market. Many schools are buying Chromebooks for their students instead of more expensive Windows laptops. They’re easier to manage and lock down than Windows laptops, but — more importantly for cash-strapped schools — they’re very cheap. Netbooks never had this sort of momentum in schools. Chromebook Usage Statistics Here’s where the rosy picture of Chromebooks starts to become more realistic. StatCounter’s browser usage statistics show how widely used different operating systems are. For example, Windows 7 has the highest share with 35.71% of web activity in April, 2014. The chart doesn’t even show Chrome OS at all, although there is an “Other” number near the bottom. Click the Download Data link to download a CSV file and we can view more detailed information. Chrome OS only accounted for 0.38% of web usage in April, 2014. Desktop Linux, which people often shrug at, accounted for 1.52% in the same month. To its credit, Chrome OS usage has increased. Chromebooks were widely mocked back in November, 2013 when the sales numbers came out. After all, they only accounted for 0.11% of web usage globally in November, 2013! But Chrome OS numbers have been improving: Nov, 2013: 0.11% Dec, 2013: 0.22% Jan, 2014: 0.31% Feb, 2014: 0.35% Mar, 2014: 0.36% Apr, 2014: 0.38% Chrome OS is climbing, but it’s definitely still in the “Other” category. It isn’t as high as we’d expect to see it with those types of sales numbers. Chromebooks vs. Netbooks Chromebooks are more limited devices than traditional PCs. You can do quite a few things, but you have to do it all using Chrome or Chrome apps. Most people won’t be enabling developer mode and installing a Linux desktop. You don’t have access to the powerful desktop software available for Windows and even Mac OS X. On the other hand, these Chromebooks are less compromised than netbooks in many ways. They come with a lightweight operating system designed for portable, mobile devices. They don’t come packed with any bloatware, like the bloatware you’ll find on competing Windows PCs and the original netbooks. They’re cheaper because the manufacturer doesn’t have to pay for a Windows license. There’s no need for antivirus software weighing the operating system down. They’re larger than the original netbooks, with many of them being 11.6-inches instead of the original 8-inch bodies many older netbooks came with. They have larger, more comfortable keyboards and fast solid-state storage. Really, Chromebooks are what netbooks wanted to be. People didn’t buy netbooks to use typical Windows software — they just wanted a lightweight PC. Of course, for many people, the real successor to netbooks is tablets. If all you want is a portable device to throw in a bag so you can get online, maybe a tablet is better. Where Does This Leave Chromebooks? So, are Chromebooks the new netbooks? It’s a bit early to answer that question. Chromebooks are definitely not out of the competition — their sales look good and their usage share is increasing. On the other hand, Chrome OS is still pretty far behind. They’re not catching fire like tablets did. Maybe netbooks were just before their time and Chromebooks were what they were always meant to be. Just as Microsoft’s Windows XP tablets failed, Windows XP netbooks also failed. Tablets took off with a more refined operating system on better hardware years later. “Netbooks” — or Chromebooks — are now taking off with a more purpose-built operating system on better hardware, too. It’s hard to count Chromebooks out because they provide a much better experience than netbooks ever did. If you’re one of the people who wants to use old Windows desktop apps on your portable laptop, you may think netbooks were better — but most people don’t want that. But maybe people either want a full desktop PC experience or a full mobile tablet experience. Is there a place for a laptop with a keyboard that can only view websites? We’ll have to wait and see. Image Credit: Kevin Jarret on Flickr, Clive Darra on Flickr, Sean Freese on Flickr

    Read the article

  • ACPI Throttling in Ubuntu

    - by Evan
    I'm looking to throttle my cpu through the ACPI. I've read up on it, but I keep receiving permission denied statements. I have 8 available throttling states. Here are the outcomes of my atttempts: evan@evan-laptop:/proc/acpi/processor/CPU0$ echo 3 /proc/acpi/processor/CPU0/throttling bash: /proc/acpi/processor/CPU0/throttling: Permission denied evan@evan-laptop:/proc/acpi/processor/CPU0$ sudo echo 3 /proc/acpi/processor/CPU0/throttling bash: /proc/acpi/processor/CPU0/throttling: Permission denied EDIT: For reference, I am running Ubuntu Karmic with Intel Core Duo T2500 with ACPI enabled

    Read the article

  • Magic Mouse and Alum keyboard autosleep?

    - by Moshe
    How does the power management of the wireless keyboard and magic mouse work with iMac? (late 2009) Do I need to manually power off the keyboard and mouse when I shut off my Mac or do they power off/sleep automatically? ( BONUS: How often should the batteries be replaced? )

    Read the article

  • Home entertainment karaoke system

    - by Mehper C. Palavuzlar
    Here is what I have: 40" Sony Bravia LCD TV, 5+1 speaker system, lots of original Karaoke CDs, and of course, a microphone. To set up a karaoke entertainment system, what kind of hardware do I need? Are there any standalone karaoke players out there? I hope my only option is not having to connect my laptop to TV. I already have karaoke software on my laptop but I wanna step up to a higher level without the help of a computer.

    Read the article

  • Opening Time-Machine OSX backup files on Windows 7?

    - by user39279
    Hi, Have Time Machine backups on a Western Digital External HD. The Time Machine backups were done on my now dead Mac G4 running OSX Leopard- I am waiting on a new iMac but in the meantime I need to access some of my backup files urgently. I have a laptop running Windows 7 so is there any safe way of accessing some of the files from the Time Machine backup on my laptop and still be able to do a full restore when the iMac arrives? Thanks -

    Read the article

  • Installing drivers for switchable graphics

    - by Anonymous
    I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

    Read the article

  • How do I reset my BIOS password on a Advent 4211 Netbook?

    - by SocialAddict
    The title says it all really but I was hoping for a software solution to remove the password or find out what it is or even change it. It's my laptop but I can't remember what I set the BIOS password too. I know on a PC to take out the battery and clear it with the jumpers but on a laptop I'm slightly scared of breaking something. Any help would be appreciated as I'm currently without a machine!

    Read the article

  • OSX 10.6.6 SSH md5 break-in check

    - by Alex
    Information Recently one of the linux servers that I access was compromised to steal passwords and ssh keys using a modified ssh binary. This lead me to question if the attacker had compromised my OSX Laptop which had ssh access turned on. A sophos virus scan turned up nothing, and I did not have rkhunter installed before the attack, so I could not compare hashes of the system binaries to be sure. However because OSX is relatively standard for each of their major releases, I asked fiends for md5 hashes md5 /usr/bin/ssh and md5 /usr/sbin/sshd as a basic first check to see if there was anything different about my machine. A few emails later I have found the following data: Version (Arch) [N] MD5 (/usr/bin/ssh) MD5 (/usr/sbin/sshd) OSX 10.5.8 (PPC) [3] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.5.8 (intel) [5] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.6.x (intel) [7] 591fbe723011c17b6ce41c537353b059 e781fad4fc86cf652f6df22106e0bf0e OSX 10.6.x (intel) [4] 58be068ad5e575c303ec348a1c71d48b 33dafd419194b04a558c8404b484f650 Mine 10.6.6 (intel) df344cc00a294c91230c65e8b7332a79 b5094ccf4cd074aaf573d4f5df75906a where N is the number of machines with with that MD5, and the last row is my laptop. The sample is relatively heterogeneous spaning a few years of different makes and models of Apples, and different versions of 10.6.x. The different hash for my system made me worried that these binaries might have been compromised. So I made sure that my backup for the week was good, and dived into formatting my system and reinstalling OSX. After reinstalling OSX from the manufacturer DVD, I found that the MD5 hash did not change for either ssh, or sshd. Goal Make sure that my system is does not have any malicious software. Should I be worried that this base install of OSX (with no other software installed) has been compromised? I have also updated my system to 10.6.6 and found no change as well. Other Information I am not sure if this is helpful information, but my laptop is a i7 15 inch MacBook Pro bought in Nov 2010, and here is some output from system_profiler: System Software Overview: System Version: Mac OS X 10.6.6 (10J567) Kernel Version: Darwin 10.6.0 64-bit Kernel and Extensions: No Time since boot: 1:37 Hardware: Hardware Overview: Model Name: MacBook Model Identifier: MacBook6,2 Processor Name: Intel Core i7 Processor Speed: 2.66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 4 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s Boot ROM Version: MBP61.0057.B0C SMC Version (system): 1.58f16 Sudden Motion Sensor: State: Enabled On the laptop, I find: $ codesign -vvv /usr/bin/ssh /usr/bin/ssh: valid on disk /usr/bin/ssh: satisfies its Designated Requirement $ codesign -vvv /usr/sbin/sshd /usr/sbin/sshd: valid on disk /usr/sbin/sshd: satisfies its Designated Requirement $ ls -la /usr/bin/ssh -rwxr-xr-x 1 root wheel 1001520 Feb 11 2010 /usr/bin/ssh $ ls -la /usr/sbin/sshd -rwxr-xr-x 1 root wheel 1304800 Feb 11 2010 /usr/sbin/sshd $ ls -la /sbin/md5 -r-xr-xr-x 1 root wheel 65232 May 18 2009 /sbin/md5 Update So far I have not gotten an answer about this question, but if you could help by increasing the number of hashes that I can compare against, that would be great. To get hashes, and version numbers, run the following on osx: md5 /usr/bin/ssh md5 /usr/sbin/sshd ssh -V sw_vers

    Read the article

  • Internet Connection Sharing, can't Share Wireless

    - by GuyNoir
    I'm using Windows XP, and I've been trying to setup my laptop so that I can connect to the internet connection that I get on the laptop through my mobile on an ad-hoc network. I've set up an ad-hoc network, but when I try to select "allow other users to connect through this computers internet connection", the only options I have are the Local Area Connections. The tutorial I've been using says that Wireless Connection should be in that pull down menu. Any help?

    Read the article

  • Symantec site slow only when using a Mac?

    - by cozmokramer8
    I didn't know this was possible but it certainly seems slow when only using a Mac. I participate in the Symantec Connect forums regularly and when I get on it with my Windows PC or laptop it loads perfectly, but my Mac laptop the site rarely loads or if it does it takes a couple minutes for each page. My question is why does a website run slower on the Mac vs PC? No other sites experience this same issue just the symantec connect forums. Thanks, Grant

    Read the article

  • Why does my internet connection get cut off and is slow sometimes?

    - by user3716773
    When I first set up my internet connection it was all good and fast but after 2 months the connection started to be slow sometimes and sometimes there is no connection until i turn off my wifi then turn it on again on the laptop. And sometimes I have to restart the router. I don't know what's wrong. I think there is something wrong with the router because this problem happens with my brother's laptop and my phone too.

    Read the article

  • Windows 7 - SKU change?

    - by Chris W
    I've done an install of Windows 7 Ultimate on my laptop when I meant to install Pro - i.e. I've already used the Ultimate license on another box and want the laptop to run Pro for which I've got keys spare. Is there a way to change the SKU of the installed version to downgrade it so that I can use my Pro key. I've got a fair bit of stuff on it and would like to avoid re-installing the OS if I can.

    Read the article

  • Install OpenBSD from a USB flashdrive : "No OS" message on boot

    - by Opera
    Hello everyone, I'm attempting to install OpenBSD on a fancy new home server equipment I just bought and here is my problem. I followed this guide to create a bootable USB flash drive from an OpenBSD VM I have on my laptop but when I try to boot my laptop on it all I get is a "No OS" message (I tried two different USB keys). Does anyone know that problem (and its solution) ?

    Read the article

  • Display size comparison chart?

    - by Pekka
    I am in the process of collecting laptop recommendations for a friend. I need a way to show to her the size differences of the various formats (15" 4:3, 15" 16:9, 15" 16:10 .... up to 17.3") in a graphical way, so she can compare them to the laptop she currently has (15"). Does anybody know a simple comparison chart where those sizes are shown side-by-side? We have E-Mail connection only right now, so I would need some sort of a link or PDF document.

    Read the article

  • USB ports causing Wireless and Mobile Phone tethering drop out

    - by chrolli
    I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

    Read the article

  • D-Link DIR-300 slows down / loses network

    - by basic6
    Hi there, there are 2 buildings (A and B). In bldg A is an open WLAN (which I'm allowed to use btw). In bldg B is a computer that I want to connect to that network. So I flashed an old D-Link DIR-300 AP with DD-WRT, mounted it to the wall (bldg B) near a window, attached a 13 dBi directional antenna (pointing to bldg A) and configured it as AP client in that wireless network. Then there's another AP, connected to the D-Link AP, acting as standard access point, which the computer is connected to. That's basically working so far, but: Every now and then the connection is lost. Not the connection between the computer and the D-Link (I can access the DD-WRT admin page normally) or the connection between the D-Link and the WLAN (in Status - Wireless it says it's still connected to the network), but when I want to access a web page (which only works if I'm connected to the wireless network from bldg A), my Firefox keeps "Looking for" (name resolution) without finding anything. When I reset the D-Link (power off, power on) in this situation, after some moments, everything's working fine again (Internet access). I've no idea why this is happening, but usually it's at most every few weeks (most times when nobody was using the computer, so no traffic). Compared to the connection speed when I connect directly to the WLAN in bldg A (Laptop), the speed in bldg B is rather slow, but I have the impression that this difference is worse in the last few days. A few minutes ago, I got 582 KB/s down and 911 KB/s up in bldg A (directly/laptop) and 84 KB/s down and 9 KB/s up in bldg B. The speed in bldg B used to be way higher (I remember 200 KB/s up) while the actual network speed in bldg A was lower than it is now (close to those 200). I'm aware that the wireless connection between those buildings should slow things down, but I'm wondering why this difference has become that extreme. Thanks for any tips... Update: I currently want to upload a large file (1.5 GB) via FTP (FileZilla). Since that caused the D-Link to disconnect (as described in first post), I took my laptop to bldg A, connected directly to the original WLAN (bypassing my D-Link) and tried the same upload. Guess what - same issue: At some point the connection is dead (at this point I would have reset my D-Link if I was connected to it). Just as the D-Link, my laptop is still connected, but not even name resolution is working ("Looking for..." in Firefox). After reconnecting, it's working again. Maybe my D-Link isn't the problem at all...

    Read the article

  • DNS Server Order Incorrect on Windows 7 via PPTP VPN to Windows 2003 Server

    - by Simon
    Hi there. When I connect a Windows XP laptop via PPTP vpn to our Windows 2003 Server, the DNS Server order is correct: 192.168.8.3 208.67.222.222 208.67.220.220 But when I connect a Windows 7 laptop via PPTP VPN to our Windows 2003 Server, the DNS order is incorrect: 208.67.222.222 208.67.220.220 192.168.8.3 What do I need to do on our Windows 2003 Server to fix this so the when I do a ping, it will work correctly?

    Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >