Search Results

Search found 3177 results on 128 pages for 'smart phones'.

Page 99/128 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

• Windows XP corrupts registry every several hours

  - by Ilya Kazakevich

  There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

  Read the article

• Getting 502 instead of 503 when all backend servers are down running HAProxy behind Apache

  - by scarba05

  I'm testing running HAProxy as a dedicated load balancer behind Apache 2.2, replacing our current configuration where we use Apache's load balancer. In our current, Apache only, set-up if all the backend (origin) servers are down Apache will serve a 503 service unavailable message. With HAProxy I get a 502 bad gateway response. I'm using a simple reverse proxy rewrite rule in Apache RewriteRule ^/(.*) http://127.0.0.1:8000/$1 [last,proxy] In HAProxy I have the following (running in default tcp mode) defaults log global option tcp-smart-accept timeout connect 7s timeout client 60s timeout queue 120s timeout server 60s listen my_server 127.0.0.1:8000 balance leastconn server backend1 127.0.0.1:8001 check observe layer4 maxconn 2 server backend1 127.0.0.1:8001 check observe layer4 maxconn 2 Testing connecting directly to the load balancer when the backend servers are down: [root@dev ~]# wget http://127.0.0.1:8000/ test.html --2012-05-28 11:45:28-- http://127.0.0.1:8000/ Connecting to 127.0.0.1:8000... connected. HTTP request sent, awaiting response... No data received. So presumably this is down to the fact that HAProxy accepts the connection and then closes it.

  Read the article

• 2013 Predictions for Retail

  - by David Dorf

  Its that time of year to roll out the predictions for next year.  I can't say I've really nailed it in the past, but feel free to look back at my 2012, 2011, and 2010 predictions.  I'm not expecting anything earth-shattering this year; just continued maturation of several technologies that are finally taking hold. 1. Next day delivery -- Amazon finally decided it wasn't worth fighting state taxes and instead decided to place distribution centers everywhere so they can potentially offer next-day deliveries.  Not to be outdone, Walmart is looking to leverage its huge physical presence to offer the same.  Clubs like ShopRunner are pushing delivery barriers as well, so the norm is shifting to free shipping in a few days or relatively cheap shipping overnight.  Retailers need be thinking about how to ship from physical stores. 2. Bring your own device -- Earlier this year Intuit bought AisleBuyer, a mobile self-checkout start-up, at least somewhat validating the BYOD approach.  Grocery stores, especially in Europe, have been supporting in-aisle self-scanning for a while and I'm betting it will find a home in certain verticals in the US too.  There's also the BYOD concept for employees.  Some retailers are considering issuing mobile devices at hiring along side the shirt and name-tag.  Employees become responsible for the hardware until they leave. 3. TV shopping -- Will Apple finally release a TV product in 2013?  Who knows?  But the industry isn't standing still. Companies like QVC and HSN are already successfully combining the TV and online experiences for shopping.  Comcast is partnering with Tivo to allow viewers to interact with ads with Paypal handing payment.  This will be a slow maturation, but expect TVs to get smarter and eventually become a new selling channel (pun intended) for retailers. 4. Privacy backlash -- It only takes one big incident to stir the public, and I'm betting we have one in 2013.  Facebook, Google, or Apple will test the boundaries of what the public is willing to accept.  It could involve a retailer using geo-location technology, or possibly video analytics.  And as is always the case, the offender will apologize, temporarily remove the technology, and wait 2-3 years for it to be generally accepted.  Privacy is a moving target. 5. More NFC -- I've come to the conclusion that adoption of any banking technology is going to be slow.  It was slow for credit cards, ATMs, and online billpay so why should it be any different for NFC?  Maybe, just maybe the iPhone 5S will have an NFC chip, but we're not going to see mainstream uptake for years.  Next year we'll continue to see incremental improvements from Isis, Google, and Paypal and a plethora of new startups, but don't toss your magstripe cards just yet. 6. In-store location -- The technologies for tracking people inside stores is really improving.  Retailers can track people using video cameras, infrared, and by the WiFi radios in mobile phones.  We're getting closer to the point where accuracy could be a shelf-facing, which will help retailers understand how people shop, where they spend time, and what displays attract them.  Expect CPG companies to get involved and partner with retailers, since the data benefits both parties.  Consumers will benefit by being directed right to the products they seek.  (In 2013 ARTS is forming a workteam to develop new standards in this area.) 7. M&A -- Looking back at 2012 there were some really big deals involving IBM, Oracle, JDA, and NCR and I expect that trend will likely continue as vendors add assets to bolster their portfolios.  Many retailers are due for an IT transformation to support anywhere, anytime shoppers, and one-stop-vendors can minimize complexity and costs. Predictions from other sources: Independent Retailer Stores Magazine IDC Insights Mobile Commerce Daily

  Read the article

• Are there cloud network drives that let users lock files or mark them as "in use"?

  - by Brandon Craig Rhodes

  Having spent several hours reading about the features and limitations of services like DropBox and Jungle Disk and the hundreds of competitors they seem to have (as though everyone with an AWS account these days goes ahead and writes a file sharing application just for fun), I have yet to find one that would let a team of people at a small business collaborate without stepping all over each other's toes. At a small business there are often many small documents per project — estimates, contracts, project plans, budgets — and team members frequently have to open and edit them, with all sorts of problems happening if two people edit a file at once. Even if a sharing service is smart enough to keep both versions of the file created, most small-business software (like word processors, spreadsheets, estimating software, or billing systems) has no way to compare — much less to merge! — the changes in two rival versions of a file that two people edited at the same time without each other's knowledge. So, my question: are their cloud-based file sharing solutions that not only provide a virtual network drive that people can access, but that also let users lock files — even if it's not a real lock but just a flag or indicator — that could possibly prevent remote workers from both editing the same file at once? Having one person wait for another person to finish editing is a very, very small inconvenience compared to the hour or more than it can take to compare two estimates by hand until you find and resolve the rival changes. Given this fact, I am surprised that almost none of the popular file sharing solutions seem to recognize this problem and provide some solution! Does anyone know of a service that does?

  Read the article

• 13 Things From the Oracle Social Summit You Should Know

  - by Mike Stiles

  Oracle held its first annual Oracle Social Summit, “The School for the Socially Gifted,” this past week in Las Vegas.  If anyone came to the event uncertain as to why Oracle has such an interest in social, and what its plans for social are, they left with an entirely new vision of where social is headed, and why.For those unable to attend, I was able to keep my MacBook charged just long enough to capture some of the more pertinent takeaways.1. The social enterprise is inevitable.  Social technology is disrupting the hierarchies of big companies.  It’s a revolution in corporate structures, just as it has been in various governments.  It’s not crazy to ask yourself if your CEO is the next Mubarak.  (David Kilpatrick Author of “The Facebook Effect” and founder of the Techonomy Conference) 2. The social enterprise represents collaboration on steroids.  It’s tapping into the power of your people, as opposed to keeping them “in their place.”  3. 1 in every 7 humans on earth is an active Facebook user.  75% have posted a negative comment after a poor customer experience.  The average user will inform 53 people of a bad experience.4. Checking social media is the 2nd biggest use of phones now.  Reading posts from brands is 4th.5. 70% of marketers have little or no understanding of the social conversations happening around their brand.6. Advertising, when done well, is content we care about, preferably informed by those we trust.7. Acquiring low-quality fans through gimmicks, or focusing purely on fan acquisition is a mistake.  And relying purely on organic distribution is a mistake.  (John Yi, Head of Marketing Partnerships – Facebook)8. Using all this newfound data and insight serves to positively affect the customer experience.  It allows organizations to now leverage the investments they’ve made in social up to now.9. Social is not a marketing utopia where everything is free.  It’s pay to play.  The paid component is about driving attention.  10. We are only in the infancy of ad-targeting opportunities in social.  There’s an evolution underway from interest-based targeting to action-based targeting.11. There’s actually very little overlap of the people following you on different social platforms.  Don’t assume it’s the same audience on each.12. People who can create content and who also have an understanding of what drives that content are growing increasingly valuable.13. Oracle Social’s future is enterprise SRM, integrated across marketing, selling, service, HR and every other corner of the organization.And in case you thought those were the only gems to come out of the summit, you may want to keep an eye out for Tuesday’s Social Spotlight, ever so aptly titled “13 More Things from the Oracle Social Summit You Should Know.”

  Read the article

• Formatting an external HDD stuck at 70%

  - by mahmood

  My external HDD which is a 250GB WD (powered by USB) seems to have problem! Whenever i try to copy some files, it stuck while copying. I decided to format it. So I used windows tool and performed the format (not quickly) however at nearly 70% it stuck. Then I decided to perform a low level format with lowlevel. Again it stuck at 70%. I endup that the HDD has bad sector. So is there any tool that mark the bad sectors and bypass them? It is not very reasonable to through 250GB because of some bad sectors! P.S: I saw a similar topic but there were no conclusion there either. The smart data is Attribute, raw value, value, threshold, status Read Error Rate, 50, 200, 51, OK Spin-Up Time, 3275, 154, 21, OK Start/Stop Count, 2729, 98, 0, OK Reallocated Sectors Count,0, 200, 140, OK Seek Error Rate, 0, 100, 51, OK Power-On Hours (POH), 1057, 99, 0, OK Spin Retry Count, 0, 100, 51, OK Recalibration Retries ,0, 100, 51 , OK Power Cycle Count, 1385, 99, 0, OK Power-off Retract Count, 425, 200, 0, OK Load /Unload Cycle Count,12974, 196, 0, OK Temperature, 43, 43, 0, OK Reallocation Event Count,0, 200, 0, OK Current Pending Sector Count,23,200, 0, Degradation Uncorrectable Sector Count, 0, 100, 0, OK UltraDMA CRC Error Count,6, 200, 0, OK Write Error Rate/Multi-Zone Error Rate,0,100,51, OK It seems that the most important thing is this line Current Pending Sector Count,23,200, 0, Degradation Any idea on that?

  Read the article

• Best photo management software?

  - by Niels Basjes

  Hi, What I would like is a single piece of software (or a smart combination of tools) that allow me to manage my photos in a better way than what I've found so far. 1. Tags Primarily I need a way of tagging the images. So I can manually tag photos the same way we tag questions here at SO/SF/SU. I want this software to place a lot of the tags automagically (obvious things like date and resolution). 2. Face recognition What I would really like is that this software has a feature that it can recognize faces in images and places tags with the name of the person. So far I've only heard of one online photo system that can do that (Picasa) and not yet of any offline tool. 3. Version database I must have some way of having a central GIT/SVN/... that contains all images. I have had a harddrive corruption a few years ago and it took me a long time to figure out which images had been damaged. I always want to be able to go back to what the camera produced. 4. Website I want to be able to generate a website (few 'tag' specific websites) based on the actual content. 5. Easy bulk uploading Many photo tools have a one on one uploading option. I prefer simply 'throwing' my images on a file server under Linux (Samba) and let the system automagically integrate, tag, recognize, etc. all images. Ok, I know these are a bit much. Perhaps you guy's have some suggestions about existing tools that can make this possible. Or even a complete system that does this. EDIT: To clarify on the OS. I prefer Linux for any 'server' task and Windows XP for any 'desktop' task. Thanks for all your input. Niels Basjes

  Read the article

• Launch 7:Windows Phone 7 Style Live Tiles On Android Mobiles

  - by Gopinath

  Android is a great mobile OS but one thought that lingers in the mind of few Android owners is: Am I using a cheap iPhone? This is valid thought for many low end Android users as their phones runs sluggish and the user interface of Android looks like an imitation of iOS. When it comes to Windows Phone 7 users, even though their operating system features are not as great as iPhone/Android but it has its unique user interface; Windows Phone 7 user interface is a very intuitive and fresh, it’s constantly updating Live Tiles show all the required information on the home screen. Android has best mobile operating system features except UI and Windows Phone 7 has excellent user interface. How about porting Windows Phone 7 Tiles interface on an Android? That should be great. Launch 7 app brings the best of Windows Phone 7 look and feel to Android OS. Once the Launcher 7 app is installed and activated, it brings Live Tiles or constantly updating controls that show information on Android home screen. Apart from simple and smooth tiles, there are handful of customization options provided. Users can change colour of the tiles, add new tiles, enable/disable transitions. The reviews on Android Market are on the positive side with 4.4 stars by 10,000 + reviewers. Here are few user reviews 1. Does what it says. only issue for me is that the app drawer doesn’t rotate. And I would like the UI to rotate when my KB is opened. HTC desire z – Jonathan 2. Works great on atrix.Kudos to developers. Awesome. Though needs: Better notification bar More stock images of tiles Better fitting of widgets on tiles – Manny 3. Looks really good like it much more than I thought I would runs real smooth running royal ginger 2.1 – Jay 4. Omg amazing i am definetly keeping it as my default best of android and windows – Devon 5. Man! An update every week! Very very responsive developer! – Andrew You can read more reviews on Android Market here.  There is no doubt that this application is receiving rave reviews. After scanning a while through the reviews, few complaints throw light on the negative side: Battery drains a bit faster & Low end mobile run a bit sluggish. The application is available in two versions – an ad supported free version and $1.41 ad free version. Download Launcher 7 from Android Market This article titled,Launch 7:Windows Phone 7 Style Live Tiles On Android Mobiles, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• VIM with iA Writer type formatting?

  - by Ambidex

  I've been Googling for a while now. I would like to have iA Writer-like (or a bit like StackExchange) formatting in Vim. Since I love the way it formats my texts, but I'm constantly pressing "w" to skip words because my experience with Vim. I would love to be able to have the same smart formatting in Vim. I did found a nice Vim plugin for getting Vim to toggle to big and clean font: https://github.com/honza/writer.vim But this still does not enable me to use the formatting: # Header 1 ## Header 2 *underline* **strong** etc... Besides all this above, I would not mind to have Vim like shortcuts in my iA writer app if it would not be possible to implement iA formatting in Vim. Edit: After a while of even more searching, I found out this type of formatting is called Markdown. I am starting to think there isn't really a good way to directly edit a Markdown file in Vim, because Vim is not able to make things display like that? I would really like to be able to use the movement shortcuts in combination of the nice formatting of Markdown and how it is displayed in iA Writer.

  Read the article

• How do I create a wifi network bridge with qemu on OS X?

  - by a paid nerd

  I grabbed a small FreeBSD live CD and QEMU, and I'm trying to bridge my Mac OS X 10.8 wifi connection so that the guest OS is available on my LAN. However, the guest OS never gets a DHCP lease. This works perfectly with VirtualBox in their "bridged" network mode, so I know it can be done. I need to get it working with QEMU because VirtualBox doesn't support the architecture that I need for this project. Here's what I've done so far based on hours of googling: Installed TUNTAP for OS X Told OS X to supposedly forward all packets, even ARP: (NOTE: This doesn't appear to work.) $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 Created a bridge: $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) Started tcpdump with -I in the hopes that it enables promiscuous mode on the wifi device: $ sudo tcpdump -In -i en0 Run QEMU using the bridged network instructions: $ qemu-system-x86_64 -cdrom mfsbsd-9.2-RELEASE-amd64.iso -m 1024 \ -boot d -net nic -net tap,ifname=tap0,script=no,downscript=no But the guest system never gets a DHCP lease: If I tcpdump -ni tap0, I see lots of traffic from the wireless network. But if I tcpdump -ni en0, I don't see any DHCP traffic from the QEMU guest OS. Any ideas? Update 1: I tried sudo defaults write "/Library/Preferences/SystemConfiguration/com.apple.Boot" "Kernel Flags" "net.inet.ip.scopedroute=0" and rebooting per this mailing list suggestion, but this didn't help. In fact, it made VirtualBox bridged mode stop working.

  Read the article

• Why Ultra-Low Power Computing Will Change Everything

  - by Tori Wieldt

  The ARM TechCon keynote "Why Ultra-Low Power Computing Will Change Everything" was anything but low-powered. The speaker, Dr. Johnathan Koomey, knows his subject: he is a Consulting Professor at Stanford University, worked for more than two decades at Lawrence Berkeley National Laboratory, and has been a visiting professor at Stanford University, Yale University, and UC Berkeley's Energy and Resources Group. His current focus is creating a standard (computations per kilowatt hour) and measuring computer energy consumption over time. The trends are impressive: energy consumption has halved every 1.5 years for the last 60 years. Battery life has made roughly a 10x improvement each decade since 1960. It's these improvements that have made laptops and cell phones possible. What does the future hold? Dr. Koomey said that in the past, the race by chip manufacturers was to create the fastest computer, but the priorities have now changed. New computers are tiny, smart, connected and cheap. "You can't underestimate the importance of a shift in industry focus from raw performance to power efficiency for mobile devices," he said. There is also a confluence of trends in computing, communications, sensors, and controls. The challenge is how to reduce the power requirements for these tiny devices. Alternate sources of power that are being explored are light, heat, motion, and even blood sugar. The University of Michigan has produced a miniature sensor that harnesses solar energy and could last for years without needing to be replaced. Also, the University of Washington has created a sensor that scavenges power from existing radio and TV signals.Specific devices designed for a purpose are much more efficient than general purpose computers. With all these sensors, instead of big data, developers should focus on nano-data, personalized information that will adjust the lights in a room, a machine, a variable sign, etc.Dr. Koomey showed some examples:The Proteus Digital Health Feedback System, an ingestible sensor that transmits when a patient has taken their medicine and is powered by their stomach juices. (Gives "powered by you" a whole new meaning!) Streetline Parking Systems, that provide real-time data about available parking spaces. The information can be sent to your phone or update parking signs around the city to point to areas with available spaces. Less driving around looking for parking spaces!The BigBelly trash system that uses solar power, compacts trash, and sends a text message when it is full. This dramatically reduces the number of times a truck has to come to pick up trash, freeing up resources and slashing fuel costs. This is a classic example of the efficiency of moving "bits not atoms." But researchers are approaching the physical limits of sensors, Dr. Kommey explained. With the current rate of technology improvement, they'll reach the three-atom transistor by 2041. Once they hit that wall, it will force a revolution they way we do computing. But wait, researchers at Purdue University and the University of New South Wales are both working on a reliable one-atom transistors! Other researchers are working on "approximate computing" that will reduce computing requirements drastically. So it's unclear where the wall actually is. In the meantime, as Dr. Koomey promised, ultra-low power computing will change everything.

  Read the article

• MIX 2010 Covert Operations Day 3

  - by GeekAgilistMercenary

  I rolled over to the Mandalay for breakfast.  There I met a couple guys that were really excited about the new Windows 7 Phone.  They, as I, are also hopeful that the phone really gets a big push and some penetration into the market.  Not because we don’t like any other of the phones, but because this phone is so much better in many ways.  From a developer's perspective creating applications in Windows 7 Mobile will be vastly superior in ease, capabilities, and other aspects.  The architectural, existing code base, examples, and provisions to create things on the 7 Mobile Device are already existing as of RIGHT NOW.  There is no reason, except for fickle market conditions, for this phone to not just explode onto the market.  But alas, I won't hold my breath. Day three keynote had a whole new slew of things provided.  It also seemed that things got a lot more technical on this second keynote.  The oData was one of the very technical bits, yet it included almost no code.  Starting with a Netflix example and all the way to the Codename "Dallas" effort the oData Services provide some expansive possibilities. A mash up going 4 ways was then shown for finding a movie, finding local places to have a viewing, and information about the movie and were to prospectively find and buy additional movie bits.  The display was of course, in a Windows 7 Mobile device with literally a click to view each set of data.  The backend and the front end of this was beautifully smooth. The Dallas Project has a lot of potential for analytics in dashboard and scorecard creation also.  If there is a need or reason to provide data to a vast and wide range of clients, Dallas is a prime example of how to do that. Azure Clouds After the main keynote I checked out (while developing a working WPF & Silverlight Application for work) the session on deploying ASP.NET Applications, services, etc, into the cloud.  The session was pretty good, but I'll admit I got a little unfocused from it a few times.  It is after all hard to do two things at one time. I did take note that the cloud still is a multiple step process for deploying to.  This is a good thing and a bad thing.  There needs to be more checks and verifications when deploying something into the cloud just for technical reasons.  However, I feel that there should be some streamlining to the process.  Going back and forth between web and Visual Studio as the interface also seems kind of clunky.  Deployment should be able to be completed from within Visual Studio in my perspective.  Overall, the cloud is getting more and more impressive in function as well as theory. That's it from me so far on the third day of MIX.  I'll be note taking and studying hard to have more good tidbits to provide. Thanks for reading, if you're curious about more of my writing, check out this original entry at my other blog Agilist Mercenary.

  Read the article

• Laptop Acer Travelmate 4050 takes over 10 Mins to POST

  - by Belliez

  Hi, I am a computer tech and have received a laptop for repair. I noticed when I turned it on the laptop would not do anything for a min or two (the fan would run up and stop, power led would shine and some cd rom activity then stop). It would sit there with a black screen. Suddenly after a random number of minutes (between 1-20mins!) the Acer BIOS screen would display and POST would happen before booting into Windows XP. It has frozen in XP at various times and pointed towards a CPU fault and over heating. The fan was on its last legs, sounded like a car engine, so I replaced this. Still same issues. I next replaced the CPU like for like. Same problems. Also applied new thermal paste between the cpu and heatsink, when running the fan kicks in occasionally (not as often as I thought it would) and I left it playing mp3, online radio and updating to service pack 3 and it wouldnt freeze. shutting down ok, cold start, not ok. Waits again before showing the BIOS screen. The hard disk was also making a screaming noise (SMART test and chkdsk passed) but I also replaced this. The laptop powers up with and without the battery so dont think its a battery issue. Running out of ideas and wondered if anyone had any advice. Thanks

  Read the article

• Is current SATA 6 gb/s equipment simply unreliable?

  - by korkman

  I have a 45-disk array of Seagate Barracuda 3 TB ST3000DM001 (yes these are desktop drives I'm aware of that) in a Supermicro sc847 JBOD, connected via LSI 9285. I have found a solution for the problem description below by reducing speed via MegaCli -PhySetLinkSpeed -phy0 2 -a0; for i in $(seq 48); do MegaCli -PhySetLinkSpeed -phy${i} 2 -a0; done and rebooting. The question remains: Is this typical for current 6 gb/s equipment? Is this the sad state of SATA storage? Or is some of my equipment (the sff-8088 cables come to mind) bad? The Problem was: Synchronizing HW RAID-6, disks kept offlining. Fetching SMART values reveiled that those which offlined did not increase powered-on hours anymore. That is, their firmware (CC4C) seems to crash. Digging into the matter by switching to Software RAID-6, with the disks passed-through, I got tons of kernel messages scattered across all disks, with 6 gb/s: sd 0:0:9:0: [sdb] Sense Key : No Sense [current] Info fld=0x0 sd 0:0:9:0: [sdb] Add. Sense: No additional sense information And finally, when a disk offlines: megasas: [ 5]waiting for 160 commands to complete ... megasas: [35]waiting for 159 commands to complete ... megasas: [155]waiting for 156 commands to complete ... megaraid_sas: pending commands remain after waiting, will reset adapter. Ugly controller reset here, then minutes later: megaraid_sas: Reset successful. sd 0:0:28:0: Device offlined - not ready after error recovery ... sd 0:0:28:0: [sdu] Unhandled error code sd 0:0:28:0: [sdu] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK sd 0:0:28:0: [sdu] CDB: Read(10): 28 00 23 21 2f 40 00 00 70 00 sd 0:0:28:0: [sdu] killing request Reduced speed to 3 gb/s like written above, all problems vanished.

  Read the article

• How to sync two computers using new MobileMe calendar

  - by CesarGon

  I have been using MobileMe for over a year with success. I use it to sync my Outlook calendars in my work and home computers, using Windows 7 and Outlook 2007. The main Outlook calendar folder in my work computer is replicated to MobileMe as "Work", and synced to my home computer, and the main calendar folder in my home computer is replicated to MobileMe as "Home", and synced to my work computer. This means that I can see both "Work" and "Home" calendars from both computers (as well as from the web interface through me.com), which is very convenient. Yesterday I migrated to the new MobileMe calendar, accepting the suggestion that popped up on the me.com website. After the migration, the MobileMe control panel on each of Windows computers asked me to re-configure my calendar setup, and everything fell apart. The "Home" and "Work" calendar folders in Outlook are now ignored by MobileMe, and new ones named "Home in MobileMe" and "Work in MobileMe" have been created, and placed in a separate Outlook data file rather than the default. This means that now: I now have four folders, two of which are not replicated to MobileMe The two folders that are not replicated reside on a separate data file, so alarms and reminders don't work; they're basically useless to me as calendar folders In addition, the button in the MobileMe Control Panel that used to let me specify what MobileMe folder should be synced against the default Outlook folder has gone. MobileMe is now too smart. Do you have any idea how to undo this mess and go back to a situation where I have two folders, as described in the top paragraph, which keep synced? I don't want an extra data file. Thanks.

  Read the article

• Are there cloud network drives that let users lock files or mark them as "in use"?

  - by Brandon Craig Rhodes

  Having spent several hours reading about the features and limitations of services like DropBox and Jungle Disk and the hundreds of competitors they seem to have (as though everyone with an AWS account these days goes ahead and writes a file sharing application just for fun), I have yet to find one that would let a team of people at a small business collaborate without stepping all over each other's toes. At a small business there are often many small documents per project — estimates, contracts, project plans, budgets — and team members frequently have to open and edit them, with all sorts of problems happening if two people edit a file at once. Even if a sharing service is smart enough to keep both versions of the file created, most small-business software (like word processors, spreadsheets, estimating software, or billing systems) has no way to compare — much less to merge! — the changes in two rival versions of a file that two people edited at the same time without each other's knowledge. So, my question: are their cloud-based file sharing solutions that not only provide a virtual network drive that people can access, but that also let users lock files — even if it's not a real lock but just a flag or indicator — that could possibly prevent remote workers from both editing the same file at once? Having one person wait for another person to finish editing is a very, very small inconvenience compared to the hour or more than it can take to compare two estimates by hand until you find and resolve the rival changes. Given this fact, I am surprised that almost none of the popular file sharing solutions seem to recognize this problem and provide some solution! Does anyone know of a service that does?

  Read the article

• Postfix (delivery temporarily suspended: conversation with mydomain.net [private/lmtp] timed out while receiving the initial server greeting)

  - by Paul

  I'm running Debian 7.1, Postfix version 2.9.6, Dovecot Version 2.1.7 To set it up I followed mostly this (without the spamass-clamav-greylist bit) I have also got setup smart host relaying via gmail postconf -n reveals: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 milter_default_action = accept mydestination = MyDomain, localhost.net, localhost myhostname = MyDomain.net mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relay_domains = mysql:/etc/postfix/mysql_relay_domains.cf relayhost = [smtp.gmail.com]:587 smtp_connect_timeout = 120s smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/relay_passwd smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf virtual_gid_maps = static:3000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_mailbox_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_transport = lmtp:unix:private/lmtp virtual_uid_maps = static:3000 I am able to send emails to the outside world but all emails sent to me are getting stuck. mailq is showing numerous lines: A69C2414C4 2621 Fri Dec 27 14:57:03 [email protected] (conversation with MyDomain.net[private/lmtp] timed out while receiving the initial server greeting) [email protected] AB78B414BE 3796 Fri Dec 27 14:56:50 [email protected] (delivery temporarily suspended: conversation with MyDomain.net[private/lmtp] timed out while receiving the initial server greeting) [email protected] /var/log/mail.log is showing: Dec 28 09:50:09 hostname postfix/lmtp[10828]: E947C414CD: to=, relay=localhost[private/lmtp], delay=64012, delays=63712/0.25/300/0, dsn=4.4.2, status=deferred (conversation with localhost[private/lmtp] timed out while receiving the initial server greeting) Any help would be greatly appreciated. Thank you

  Read the article

• Fully FOSS EMail solution

  - by Ravi

  I am looking at various FOSS options to build a robust EMail solution for a government funded university. Commercial options are to be chosen only in the worst case scenario. Here are the requirements: Approx 1000-1500 users - Postfix or Exim? (Sendmail is out;-)) Mailing lists for different groups/Need web based archive - Mailman? Sympa? Centralised identity store - OpenLDAP? Fedora 389DS? Secure IMAP only - no POP3 required - Courier? Dovecot? Cyrus?? Anti Spam - SpamAssasin? what else? Calendaring - ?? webmail - good to have, not mandatory - needs to be very secure...so squirrelmail is out;-)? Other questions: What mailbox storage format to use? where to store? database/file system? Simple and effective HA options? Is there a web proxy equivalent to squid in the mail server world? software load balancers?CARP? Monitoring and alert? Backup? The govt wants to stimulate the local economy by buying hardware locally from whitebox vendors. Also local consultants and university students will do the integration. We looked at out-of-the-box integrated solutions like Axigen, Zimbra and GMail but each was ruled out in favour of a DIY approach in the hopes of full control over the data and avoiding vendor lockin - which i though was a smart thing to do. I wish more provincial governments in the developing world think of these sort of initiatives As for OS - Debian, FreeBSD would be first preference. Commercial OS's need not apply. CentOS as second tier option...

  Read the article

• Debian - starting UFW (Uncomplicated Firewall) before network interfaces are operational

  - by Tomasz Zielinski

  I want to install UFW on Debian Lenny. Everything looks straightforward except that I don't know where to plug UFW startup script so that it configures iptables before hax0rs can break in. I've reviewed runlevel directories and in /etc/rc0.d, /etc/rc6.d and /etc/rcS.d there are items like these: S35networking -> ../init.d/networking S36ifupdown -> ../init.d/ifupdown Runlevel 0 and 6 are for shutdown and reboot so I guess nothing should be changed there, but runlevel S advertises itself (in README) like something for me: The scripts in this directory whose names begin with an 'S' are executed once when booting the system, even when booting directly into single user mode. The following sequence points are defined at this time: * After the S40 scripts have executed, all local file systems are mounted and networking is available. All device drivers have been initialized. (What bothers me is that both rc0/6.d and rcS.d point to the same networking and ifupdown scripts, but after looking at sources I believe those scripts are smart enough to figure out where to start and where to stop networking.) Now, I think that I should plug my /lib/ufw/ufw-init into /etc/rcS.d, with priority higher that the one of ifupdown and networking, i.e. <= 38 for my /etc/rcS.d. Am I right in this "analysis" ?

  Read the article

• SQL Server Backup modes, and a huge log file

  - by Matt Dawdy

  Okay, I'm not a server administrator, a network guy, or a DBA. I'm merely a programmer helping out a small company. They have IT guy who isn't MS centric (most stuff is on Mac) and he and I are trying to figure out a solution here. We've got 1 main database. We run nightly full backups. I know they are full backups because I can take the latest file, or any of the daily backups, and go to a completely new machine and "restore" the backup to an empty database and our app runs perfectly fine off of this backup. The backups have grown from 60 MB to 250MB over 4 months. When running, then log file is 1.7 GB, and the data file is only 200-300 MB. Yes, recovery model is set to full. So, my question, after all of that, if we are keeping daily backups, and we don't have the need / aren't smart enough to roll the DB back to a certain time, if I change the recovery mode to simple, am I really losing anything? And, if I do change it to simple, will it completely dump the log file or at least reduce it way the hell down? And, will that make our database run faster? I know that it'll make my life easier when I copy a relatively recent backup to my local machine to do development and testing...

  Read the article

• Mail.app doesn't detect sender in Address Book

  - by CoreSandello

  I don't understand, how does 'smart addresses' in Mail.app work. Recently I mentioned, that for some emails I don't see person's full name in 'From' column. I started to dig into this behavior and found out, that I have few contacts in my Address Book, that are not recognized by Mail.app. Here how it looks: I have a person in Address Book with filled email entry and filled first/last name (localized). I have an incoming email from that person (from email specified in Address Book), but first/last name in the email itself doesn't match with ones specified in Address Book (e. g. 'From' field in email looks like 'John [work] <[email protected]>' while Address Book entry is 'John Smith' (localized, in Russian)). And Mail.app doesn't recognize that this mail is originating from that person in Address Book: if I click on 'From' field, it suggests to me to add sender to Address Book, while for others' emails I have 'Show in Address Book' menu entry (especially for ones with full localized name in 'From' field). I'm wondering, is that behavior correct or I'm missing something? I'm using Snow Leopard & Mail 4.0; my system language set to English, if that matters. I'd like to have some clarifications on that Mail.app behavior: whenever it fixable or not (and if it's fixable, I'd like to see a fix). By the way, is it possible to match sender's address against Address Book entry in filter rules or not? That would be great, if I can create rules like 'move all mail from that person to that folder' without specifying exact source address. Thanks, Ivan.

  Read the article

• Using Varnish (only) for DDoS mitigation

  - by Martin Kanters

  My VPS is suffering from a (D)DoS doing a SYN flood with spoofed IPs. I'm right now searching from ways how to be able to defend (at least a bit) against it. It's running a DirectAdmin apache2 webserver. Mainly used for serving PHP and MySQL. We are using CloudFlare, which are saying that they are able to mitigate (D)DoS at some level, now the attacker knows our real IP address, so CloudFlare isn't helping a bit. I've done some searching on the net and found out about enabling SYN cookies, to defend against it. I've checked my settings and it seems it was enabled all along. I've also read about that Varnish is able to defend against SYN flooding and Slowloris attacks, now I'm pretty interested in using that. The thing is that CloudFlare is already caching a lot from us, and I don't wish to spend too much resources on Varnish. Is it possible and smart to set up Varnish only for the better handling of requests? Are there perhaps better ways which I've missed? Thanks in advance, Martin

  Read the article

• what is the fastest way to copy all data to a new larger hard drive?

  - by SUPER user

  I was certain this would have been covered before, but I cannot find an answer amongst all the almost-duplicates that come up; sorry if I've missed something obvious. I have a full 320gb disk inside my machine, a new 1tb disk to replace it, and a USB 2.0 chassis. It is only data on a single partition, no OS/apps involved, and the old drive will be kept somewhere as backup (no secure wiping etc). The simple option would be to put new disk in USB chassis, copy files, then swap them over. But for USB pen drives, reading is around 4x faster than writing. If the same is true for a USB SATA chassis (is it?) then it would be significantly faster to swap the drives first and read from the old drive over USB, right? Then the other consideration is that copying lots of files is usually slower than a single file of equivalent size. Is Windows 7 smart enough to do everything in a single lump like that, or is there specialised software that should be used instead? (Even if SATA-SATA copying is faster than involving USB, knowing what to do when it isn't an option is useful information.) Summary: Does a USB SATA chassis suffer from a read/write inequality? (like a USB pen drive does, but unlike a direct SATA connection) Can Windows 7 do sequential access? (I can't find confirmation if Robocopy does this.) Or is it necessary to use a bootable CD/USB with something like Clonezilla to achieve sequential copy speeds?

  Read the article

• AccelerometerInput XNA GameComponent

  - by Michael B. McLaughlin

  Bad accelerometer controls kill otherwise good games. I decided to try to do something about it. So I create an XNA GameComponent called AccelerometerInput. It’s still a beta project but you are welcome to try it, use it, modify it, etc. I’m releasing under the terms of the Microsoft Public License. Important info: First, it only supports tilt-style controls currently. I have not implemented motion-style controls yet (and make no promises as to when I might find time to do so). Second, I commented it heavily so that you can (hopefully) understand what it is doing. Please read the comments and examine the sample game for a usage overview. There are configurable parameters which I encourage you to make use of (both by modifying the default values where your testing shows it to be appropriate and also by implementing a calibration mechanism in your game that lets the user adjust those configurable values based on his or her own circumstances). Third, even with this code, accelerometer controls are still a fairly advanced topic area; you will likely find nothing but disappointment if you simply plunk this into some project without testing it on a device (or preferably on several devices). Fourth, if you do try this code and find that something doesn’t work as expected on your phone, please let me know as I want to improve it and can only do so with your help. Let me know what phone model it is, what you tried doing, what you expected, and what result you had instead. I may or may not be able to incorporate it into the code, but I can let others know at the very least so that they can make appropriate modifications to their games (I’m hopeful that all phones are reasonably similar in their workings and require, at most, a slight calibration change, but I simply don’t know). Fifth, although I’ll do my best to answer any questions you may have about it, I’m very busy with a number of things currently so it might take a little while. Please look through the code and examine the comments and sample game first before asking any questions. It’s likely that the answer is in there. If not, or if you just aren’t really sure, ask away. Sixth, there are differences between a portrait-mode game and a landscape mode game (specifically in the appropriate default tilt adjustment for toward the user/away from the user calculations). This is documented and the default is set for landscape. If you use this for a portrait game, make the appropriate change (look for the TODO: comment in AccelerometerInput.cs). Seventh, no provision whatsoever is made for disabling screen locking. It is up to you to implement that and to take appropriate measures to detect when the user has been idle for too long and timeout the game. That code is very game-specific. If you have questions about such matters, consult the relevant MSDN documentation and, if you still have questions, visit the App Hub forums and ask there. I answer questions there a lot and so I may even stumble across your question and answer it. But that’s a much better forum than the comments section here for questions of that sort so I would appreciate it if you asked idle detection-related questions there (or on some other suitable site that you may be more familiar and comfortable with). Eighth, this is an XNA GameComponent intended for XNA-based games on WP7. A sufficiently knowledgeable Silverlight developer should have no problem adapting it for use in a Silverlight game or app. I may create a Silverlight version at some point myself. Right now I do not have the time, unfortunately. Ok. Without further ado: http://www.bobtacoindustries.com/developers/utils/AccelerometerInput.zip Have a great St. Patrick’s Day!

  Read the article

• Adding third disk as a single disk in a server with an existing RAID1

  - by slowhandsolo

  I've got a ProLiant DL360 G5 server (Fedora 13) with two SAS disks in a hardware RAID 1, working fine. Now I hot plugged another SAS disk. I'd like to configure this new hard disk out of my RAID, as a single non-RAID disk (ex. /dev/sdb). Even after rebooting the server, I can't see the new disk with "fdisk -l". It displays only my hardware RAID, but not the new disk. [root@myserver]# fdisk -l Disco /dev/cciss/c0d0: 300.0 GB, 299966445568 bytes Disposit. Inicio Comienzo Fin Bloques Id Sistema /dev/cciss/c0d0p1 * 1 126 512000 83 Linux /dev/cciss/c0d0p2 126 71798 292422656 8e Linux LVM Disco /dev/dm-0: 234.9 GB, 234881024000 bytes Disco /dev/dm-1: 10.5 GB, 10536091648 bytes Disco /dev/dm-2: 21.0 GB, 20971520000 bytes Disco /dev/dm-3: 31.5 GB, 31474057216 bytes Disco /dev/dm-4: 1577 MB, 1577058304 bytes However, I can see the new disk using the HP Array Configuration Utility CLI for Linux "hpacucli": [root@myserver]# hpacucli => controller slot=0 physicaldrive all show status physicaldrive 1I:1:1 (port 1I:box 1:bay 1, 300 GB): OK physicaldrive 1I:1:2 (port 1I:box 1:bay 2, 300 GB): OK physicaldrive 1I:1:3 (port 1I:box 1:bay 3, 300 GB): OK => controller slot=0 pd all show detail Smart Array P400i in Slot 0 (Embedded) array A physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 **unassigned** physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: **Unassigned Drive** As you can see, I've got two SAS disks in a RAID 1 and the new disk as "unassigned". Is there any way to work with the new disk as another non-RAID single disk? If relevant, I want to create a new partition in my new disk, format it with mkfs and mount it, but as I can't see it with fdisk, I don't know how to do it. Thanks!

  Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >