Search Results

Search found 42662 results on 1707 pages for 'page init'.

Page 1/1707 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Can't run init script on boot after another init script

  - by Colin McQueen

  I have three init scripts and the Broker init script runs fine, but when I try to run the Consumer init script and then the Data Collector init script, the only process that is running is the Broker. I added the symbolic links to the run levels using update-rc.d for each script and I also changed the number prefixes in the symbolic links to try and run the scripts in the proper order but that did not work. I am able to run the scripts from the terminal and they work fine but they need to all be started on boot. Any ideas as to why my other scripts are not running? Also inside my Consumer and Data Collector I am running: su user1 -c 'java -jar foo.jar' to start the services. Also the Consumer Java class sits and waits for a message from the queue, so the Java code does not stop until I specify the stop argument for the init script. The Broker has to start first, then the Consumer, then the Data Collector. Adding the symbolic links for the runlevels: sudo update-rc.d Broker defaults 10 90 sudo update-rc.d Consumer defaults 15 85 sudo update-rc.d DataCollector defaults 20 80

  Read the article

• How to install an init.d script in ubuntu?

  - by suhail

  i am trying to install an init.d script, to run celery for scheduling tasks. Here is the steps i followed: copied the file celeryd and pasted it in folder /etc/init.d/ created a configuration file celeryd in folder /etc/default/ now when i tried to start it by sudo /etc/init.d/celeryd start, it throws error sudo: /etc/init.d/celeryd: command not found I googled about how to install init.d, i got this SO-question. it says to issue a uname -a and when i does i get this: Linux capsonesystem8-desktop 3.2.0-43-generic-pae #68-Ubuntu SMP Wed May 15 03:55:10 UTC 2013 i686 i686 i386 GNU/Linux and also it says use utils like insserv to enable init.d script so tried: insserv /etc/init.d/celeryd but it throws error insserv: command not found so i tried to install insserv sudo apt-get install insserv. but it say aleady installed: insserv is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 222 not upgraded. So how to install init.d script?? Any help will be appreciated. update1: when i tried: $ sh -x /etc/init.d/celeryd start it reveal some errors. may be that is why the service won’t start. update2: I cleared all the errors when i run $ sh -x /etc/init.d/celeryd start but still sudo /etc/init.d/celeryd start throws command not found error

  Read the article

• Page Zipper Unpacks Multi-Page Articles for Single-Page Display

  - by ETC

  It’s annoying when you find an article worth reading but it’s diced up into little segments. Skip clicking next-next-next to read; use Page Zipper to unpack multi-page articles and read them all on one page. Page Zipper is available as both a bookmarklet and a Firefox extension. You simply click on the bookmarklet (or extension icon) when you’re looking at a segmented article or gallery. Page Zipper renders the page with all the individual pages laid out for easy reading. No more clicking next a dozen times to get to the end of the article or gallery. In addition unpacking long articles it also rocks keyboard shortcuts for viewing galleries and automatically resizes images to best-fit your browser window. Check the video above to see the article and gallery features in action. Visit the link below to read more and grab a copy of Page Zipper for your browser. Page Zipper [PrintWhatYouLike] Latest Features How-To Geek ETC How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? Page Zipper Unpacks Multi-Page Articles for Single-Page Display Minty Bug: Build an FM Bug Inside a Mint Container Get the MakeUseOf eBook Guide to Hacker Proofing Your PC Sync Your Windows Computer with Your Ubuntu One Account [Desktop Client] Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap

  Read the article

• /etc/init.d Character Encoding Issue

  - by Ryan Rosario

  I have a script in /etc/init.d on an EC2 image that, on machine startup, pulls in source code via SVN, builds it, and then runs it using Ant. The source code is Java. Within this code is a call to the Weka library which writes a file to disk. On most Ubuntu AMIs, and my home machines' versions of Ubuntu, there is no issue. The problem is that with certain versions/AMIs of Ubuntu, Unicode characters in the file are replaced with question marks ('?'). If I run the job manually on the trouble instance, Unicode is output to file correctly, but not when run from /etc/init.d. What might be causing this problem and how can I fix it so that Unicode characters appear correctly in files written from /etc/init.d processes?

  Read the article

• How to add in in appendix page numbers separately from the regular heading page numbers

  - by O_O

  I had regular page numbers on my Microsoft Word 2007 document at the bottom center of my page, starting from 1 from Insert tab Page Number Bottom of page Plain Number 2. I added an appendix with Heading 6 and followed the instructions from http://support.microsoft.com/kb/290953 to create separate page numbers just for the appendix, i.e. A-1, A-2, B-1, B-2, etc. The Page Number Format configuration I did is here: ]When I try to set this however, it changes all of the page numbers to this format, even the ones that aren't from heading 6 (meaning it changes the non-appendix content to this page number format). Here's another example: 1 Heading1 has page number A-4 (note it starts at A-1 at the title page) ... Appendix A has page number A-12 I would like to change it so that 1 Heading1 has page number 4 (note it starts at 1 at the title page) ... Appendix A has page number A-1 Anyone know why this is happening? Thank you!!

  Read the article

• Ensuring ethernet is configured before continuing init scripts.

  - by Pete Ashdown

  Is there a better way to ensure that an ethernet port is configured before continuing through startup init scripts? When 802.3ad bonded ethernet is configured on Ubuntu, it takes some time before it finishes protocol negotiation and starts passing packets, because the networking script just configures, but does not verify that traffic is being passed. As a result, this can throw off some of the other network dependent scripts, like the init for drbd. Right now, I just have a loop that pings the gateway in a startup script, but this seems less than optimal: GATEWAYIP=10.0.0.1 while ( ! ping -c 1 $GATEWAYIP ); do echo gateway not up done

  Read the article

• Running evrouter at boot with init.d, or after xserver starts

  - by J V

  I'm using evrouter to set up mouse button binds, and init.d to start it. My init.d file: #!/bin/bash #Simple init.d script to run evrouter ### BEGIN INIT INFO # Provides: evrouter # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Set evrouter bindings # Description: Set evrouter bindings at boot time. ### END INIT INFO config="/opt/hacks/evrouterrc" case "$1" in start|restart|reload|force-reload) evrouter -c "$config" /dev/input/event* ;; stop) echo "Evrouter is not a daemon, change settings file at '$config' and restart" ;; *) echo "Usage: $0 start" >&2 exit 3 ;; esac evrouter however complains that: evrouter: could not open display "". If evrouter requires xserver to be up, how do I get init to wait until after xserver starts to run this script? If xserver restarts will this script run automatically? Running this with sudo services evrouter start still results in this error, can init.d scripts not tell where my display is? (Not exactly familiar with init, runlevels, etc)

  Read the article

• korgac - init.d kill script on shutdown

  - by Max Magnus

  I'm new to Ubuntu 12.04 and Linux and my English is not the best, so I'm sorry for incorrect or stupid questions. I've installed KOrganizer and to start the reminder when I boot the system, I added the korgac command to the autostart. This works fine. But now, every time I want to reboot or shutdown my system, there appears a message that tells me that an unknown process is still running... so I have kill it manually before reboot/shutdown. I knew that it is the korgac process that causes this problem, so I decided to create an init.d script. I've created a script, put it into init.d, and created 2 symbolic links: to rc0.d and to rc6.d. The name starts with K10script... (I hope it is correct so). K10korgac_kill: #! /bin/sh pkill korgac exit 0 Unfortunately this wasn't able to resolve my problem. Maybe my script is wrong. I hope someone can help me. Thanks for your time Max

  Read the article

• Cannot login to Ubuntu 14.04 returns to the login screen

  - by Safder

  I updated to 14.04 from 12.04.03. I was using cinammon at that time. When I upgraded to 14.04 ,I got a serious problem. I was unable to login, as whenever I hit enter after entering password, it is taking me straight to login screen again.I unable to login like Guest even. So, here is my .xsession-errors file. possibly anyone could help. Thanks in advance. Script for ibus started at run_im. Script for auto started at run_im. Script for default started at run_im. init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd respawning too fast, stopped init: gnome-settings-daemon main process (14717) killed by TRAP signal init: gnome-settings-daemon main process ended, respawning init: update-notifier-crash (/var/crash/_usr_bin_gnome-session.1000.crash) main process (14607) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_ibus_ibus-x11.1000.crash) main process (14623) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_x86_64-linux-gnu_bamf_bamfdaemon.1000.crash) main process (14663) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_ibus_ibus-ui-gtk3.1000.crash) main process (14620) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_gnome-session_gnome-session-check-accelerated.1000.crash) main process (14612) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_gnome-settings-daemon_gnome-settings-daemon.1000.crash) main process (14616) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_unity_unity-panel-service.1000.crash) main process (14629) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_unity-settings-daemon_unity-settings-daemon.1000.crash) main process (14625) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_update-notifier_system-crash-notification.1000.crash) main process (14662) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_gnome-session_gnome-session-check-accelerated.127.crash) main process (14613) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_share_apport_apport-gtk.1000.crash) main process (14665) terminated with status 133 init: update-notifier-crash (/var/crash/linux-image-3.13.0-24-generic.0.crash) main process (14606) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_bin_Xorg.0.crash) main process (14609) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_ibus_ibus-x11.127.crash) main process (14624) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_ibus_ibus-ui-gtk3.127.crash) main process (14622) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_gnome-settings-daemon_gnome-settings-daemon.127.crash) main process (14618) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_unity-settings-daemon_unity-settings-daemon.127.crash) main process (14628) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_x86_64-linux-gnu_bamf_bamfdaemon.127.crash) main process (14664) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_bin_gnome-session.127.crash) main process (14608) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_unity_unity-panel-service.127.crash) main process (14634) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_share_apport_apport-gtk.127.crash) main process (14667) terminated with status 133 init: gnome-settings-daemon main process (14843) killed by TRAP signal init: gnome-settings-daemon main process ended, respawning init: gnome-settings-daemon main process (14850) killed by TRAP signal init: gnome-settings-daemon main process ended, respawning init: gnome-session (GNOME) main process (14727) killed by TRAP signal init: gnome-settings-daemon main process (14859) killed by TRAP signal init: logrotate main process (14570) killed by TERM signal init: upstart-dbus-session-bridge main process (14683) terminated with status 1 init: Disconnected from notified D-Bus bus

  Read the article

• /etc/rc.local not being run on Ubuntu Desktop Install

  - by loosecannon

  I have been trying to get sphinx to run at boot, so I added some lines to /etc/rc.local but nothing happens when I start up. If i run it manually it works however. /etc/init.d/rc.local start works fine as does /etc/rc.local It's listed in the default runlevel and is all executable but it does not work. I am considering writing a separate init.d script to do the same thing but that's a lot of work for a simple task dumbledore:/etc/init.d# ls -l rc* -rwxr-xr-x 1 root root 8863 2009-09-07 13:58 rc -rwxr-xr-x 1 root root 801 2009-09-07 13:58 rc.local -rwxr-xr-x 1 root root 117 2009-09-07 13:58 rcS dumbledore:/etc/init.d# ls /etc/rc.local -l -rwxr-xr-x 1 root root 491 2011-05-14 16:13 /etc/rc.local dumbledore:/etc/init.d# runlevel N 2 dumbledore:/etc/init.d# ls /etc/rc2.d/ -l total 4 lrwxrwxrwx 1 root root 18 2011-04-22 18:53 K08vmware -> /etc/init.d/vmware -rw-r--r-- 1 root root 677 2011-03-28 15:10 README lrwxrwxrwx 1 root root 18 2011-04-22 18:53 S19vmware -> /etc/init.d/vmware lrwxrwxrwx 1 root root 18 2011-05-15 14:09 S20ddclient -> ../init.d/ddclient lrwxrwxrwx 1 root root 20 2011-03-10 18:00 S20fancontrol -> ../init.d/fancontrol lrwxrwxrwx 1 root root 20 2011-03-10 18:00 S20kerneloops -> ../init.d/kerneloops lrwxrwxrwx 1 root root 27 2011-03-10 18:00 S20speech-dispatcher -> ../init.d/speech-dispatcher lrwxrwxrwx 1 root root 19 2011-03-10 18:00 S25bluetooth -> ../init.d/bluetooth lrwxrwxrwx 1 root root 20 2011-03-10 18:00 S50pulseaudio -> ../init.d/pulseaudio lrwxrwxrwx 1 root root 15 2011-03-10 18:00 S50rsync -> ../init.d/rsync lrwxrwxrwx 1 root root 15 2011-03-10 18:00 S50saned -> ../init.d/saned lrwxrwxrwx 1 root root 19 2011-03-10 18:00 S70dns-clean -> ../init.d/dns-clean lrwxrwxrwx 1 root root 18 2011-03-10 18:00 S70pppd-dns -> ../init.d/pppd-dns lrwxrwxrwx 1 root root 14 2011-05-07 11:22 S75sudo -> ../init.d/sudo lrwxrwxrwx 1 root root 24 2011-03-10 18:00 S90binfmt-support -> ../init.d/binfmt-support lrwxrwxrwx 1 root root 17 2011-05-12 21:18 S91apache2 -> ../init.d/apache2 lrwxrwxrwx 1 root root 22 2011-03-10 18:00 S99acpi-support -> ../init.d/acpi-support lrwxrwxrwx 1 root root 21 2011-03-10 18:00 S99grub-common -> ../init.d/grub-common lrwxrwxrwx 1 root root 18 2011-03-10 18:00 S99ondemand -> ../init.d/ondemand lrwxrwxrwx 1 root root 18 2011-03-10 18:00 S99rc.local -> ../init.d/rc.local dumbledore:/etc/init.d# cat /etc/rc.local #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. # Start sphinx daemon for rails app on startup # Added 2011-05-13 # Cannon Matthews cd /var/www/extemp /usr/bin/rake ts:config /usr/bin/rake ts:start touch ./tmp/ohyeah cd - exit 0 dumbledore:/etc/init.d# cat /etc/init.d/rc.local #! /bin/sh ### BEGIN INIT INFO # Provides: rc.local # Required-Start: $remote_fs $syslog $all # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: # Short-Description: Run /etc/rc.local if it exist ### END INIT INFO PATH=/sbin:/usr/sbin:/bin:/usr/bin . /lib/init/vars.sh . /lib/lsb/init-functions do_start() { if [ -x /etc/rc.local ]; then [ "$VERBOSE" != no ] && log_begin_msg "Running local boot scripts (/etc/rc.local)" /etc/rc.local ES=$? [ "$VERBOSE" != no ] && log_end_msg $ES return $ES fi } case "$1" in start) do_start ;; restart|reload|force-reload) echo "Error: argument '$1' not supported" >&2 exit 3 ;; stop) ;; *) echo "Usage: $0 start|stop" >&2 exit 3 ;; esac

  Read the article

• How to Omit the Page Number From the First Page of a Word 2013 Document Without Using Sections

  - by Lori Kaufman

  Normally, the first page, or cover page, of a document does not have a page number or other header or footer text. You can avoid putting a page number on the first page using sections, but there is an easier way to do this. If you don’t plan to use sections in any other part of your document, you may want to avoid using them completely. We will show you how to easily take the page number off the cover page and start the page numbering at one on the second page of your document by simply using a footer (or a header) and changing one setting. Click the Page Layout tab. In the Page Setup section of the Page Layout tab, click the Page Setup dialog box launcher icon in the lower, right corner of the section. On the Page Setup dialog box, click the Layout tab and select the Different first page check box in the Headers and footers section so there is a check mark in the box. Click OK. You’ll notice there is no page number on the first page of your document now. However, you might want the second page to be page one of your document, only to find it is currently page two. To change the page number on the second page to one, click the Insert tab. In the Header & Footer section of the Insert tab, click Page Number and select Format Page Numbers from the drop-down menu. On the Page Number Format dialog box, select Start at in the Page numbering section. Enter 0 in the edit box and click OK. This allows the second page of your document to be labeled as page one. You can use the drop-down menu on the Format Page Numbers button in the Header & Footer section of the Insert tab to add page numbers to your document as well. Easily insert formatted page numbers at the top or bottom of the page or in the page margins. Use the same menu to remove page numbers from your document.     

  Read the article

• What is the current state of Ubuntu's transition from init scripts to Upstart?

  - by Adam Eberlin

  What is the current state of Ubuntu's transition from init.d scripts to upstart? I was curious, so I compared the contents of /etc/init.d/ to /etc/init/ on one of our development machines, which is running Ubuntu 12.04 LTS Server. # /etc/init.d/ # /etc/init/ acpid acpid.conf apache2 --------------------------- apparmor --------------------------- apport apport.conf atd atd.conf bind9 --------------------------- bootlogd --------------------------- cgroup-lite cgroup-lite.conf --------------------------- console.conf console-setup console-setup.conf --------------------------- container-detect.conf --------------------------- control-alt-delete.conf cron cron.conf dbus dbus.conf dmesg dmesg.conf dns-clean --------------------------- friendly-recovery --------------------------- --------------------------- failsafe.conf --------------------------- flush-early-job-log.conf --------------------------- friendly-recovery.conf grub-common --------------------------- halt --------------------------- hostname hostname.conf hwclock hwclock.conf hwclock-save hwclock-save.conf irqbalance irqbalance.conf killprocs --------------------------- lxc lxc.conf lxc-net lxc-net.conf module-init-tools module-init-tools.conf --------------------------- mountall.conf --------------------------- mountall-net.conf --------------------------- mountall-reboot.conf --------------------------- mountall-shell.conf --------------------------- mounted-debugfs.conf --------------------------- mounted-dev.conf --------------------------- mounted-proc.conf --------------------------- mounted-run.conf --------------------------- mounted-tmp.conf --------------------------- mounted-var.conf networking networking.conf network-interface network-interface.conf network-interface-container network-interface-container.conf network-interface-security network-interface-security.conf newrelic-sysmond --------------------------- ondemand --------------------------- plymouth plymouth.conf plymouth-log plymouth-log.conf plymouth-splash plymouth-splash.conf plymouth-stop plymouth-stop.conf plymouth-upstart-bridge plymouth-upstart-bridge.conf postgresql --------------------------- pppd-dns --------------------------- procps procps.conf rc rc.conf rc.local --------------------------- rcS rcS.conf --------------------------- rc-sysinit.conf reboot --------------------------- resolvconf resolvconf.conf rsync --------------------------- rsyslog rsyslog.conf screen-cleanup screen-cleanup.conf sendsigs --------------------------- setvtrgb setvtrgb.conf --------------------------- shutdown.conf single --------------------------- skeleton --------------------------- ssh ssh.conf stop-bootlogd --------------------------- stop-bootlogd-single --------------------------- sudo --------------------------- --------------------------- tty1.conf --------------------------- tty2.conf --------------------------- tty3.conf --------------------------- tty4.conf --------------------------- tty5.conf --------------------------- tty6.conf udev udev.conf udev-fallback-graphics udev-fallback-graphics.conf udev-finish udev-finish.conf udevmonitor udevmonitor.conf udevtrigger udevtrigger.conf ufw ufw.conf umountfs --------------------------- umountnfs.sh --------------------------- umountroot --------------------------- --------------------------- upstart-socket-bridge.conf --------------------------- upstart-udev-bridge.conf urandom --------------------------- --------------------------- ureadahead.conf --------------------------- ureadahead-other.conf --------------------------- wait-for-state.conf whoopsie whoopsie.conf To be honest, I'm not entirely sure if I'm interpreting the division of responsibilities properly, as I didn't expect to see any overlap (of what framework handles which services). So I was quite surprised to learn that there was a significant amount of overlap in service references, in addition to being unable to discern which of the two was intended to be the primary service framework. Why does there seem to be a fair amount of redundancy in individual service handling between init.d and upstart? Is something else at play here that I'm missing? What is preventing upstart from completely taking over for init.d? Is there some functionality that certain daemons require which upstart does not yet have, which are preventing some services from converting? Or is it something else entirely?

  Read the article

• Launching a PHP daemon from an LSB init script w/ start-stop-daemon

  - by EvanK

  I'm writing an lsb init script (admittedly something I've never done from scratch) that launches a php script that daemonizes itself. The php script starts off like so: #!/usr/bin/env php <?php /* do some stuff */ It's then started like so in the init script: # first line is args to start-stop-daemon, second line is args to php-script start-stop-daemon --start --exec /path/to/executable/php-script.php \ -- --daemon --pid-file=$PIDFILE --other-php-script-args The --daemon flag causes the php script to detach & run as a daemon itself, rather than relying on start-stop-daemon to detach it. This is how it's (trying to) stop it in the init script: start-stop-daemon --stop --oknodo --exec /path/to/executable/php-script.php \ --pidfile $PIDFILE The problem is, when I try to stop via the init script, it gives me this: $ sudo /etc/init.d/my-lsb-init-script stop * Stopping My Project No /path/to/executable/php-script.php found running; none killed. ...done. A quick peek at ps tells me that, even though the php script itself is executable, its running as php <script> rather than the script name itself, which is keeping start-stop-daemon from seeing it. The PID file is even being generated, but it seems to ignore it and try to find+kill by process name instead. $ ps ax | grep '/path/to/executable/php-script.php' 2505 pts/1 S 0:01 php /path/to/executable/php-script.php --daemon --pid-file /var/run/blah/blah.pid --other-php-script-args 2507 pts/1 S 0:00 php /path/to/executable/php-script.php --daemon --pid-file /var/run/blah/blah.pid --other-php-script-args 2508 pts/1 S 0:00 php /path/to/executable/php-script.php --daemon --pid-file /var/run/blah/blah.pid --other-php-script-args 2509 pts/1 S 0:00 php /path/to/executable/php-script.php --daemon --pid-file /var/run/blah/blah.pid --other-php-script-args 2518 pts/1 S 0:01 php /path/to/executable/php-script.php --daemon --pid-file /var/run/blah/blah.pid --other-php-script-args $ cat /var/run/blah/blah.pid 2518 Am I completely misunderstanding something here? Or is there an easy way to work around this?

  Read the article

• Custom initrd init script: how to create /dev/initctl

  - by Posco Grubb

  I have a virtual machine (VMM is Xen 3.3) equipped with two IDE HDD's (/dev/hda and /dev/hdb). The root file system is in /dev/hda1, where Scientific Linux 5.4 is installed. /dev/hdb contains an empty ext2 file system. I want to protect the root file system from writes by the VM by using aufs (AnotherUnionFS) to layer a writable file system on top of the root file system. The changes to / will be written to the file system located on /dev/hdb. (Furthermore, outside the VM, the file backing the /dev/hda will also be set to read-only permissions, so the VMM should also prevent the VM from modifying at that level.) (The purpose of this setup: be able to corrupt a virtual machine using software-implemented fault injection but preserve the file system image in order to quickly reboot the VM to a fault-free state.) How do I get an initrd init script to do the necessary mounts to create the union file system? I've tried 2 approaches: I've tried modifying the nash script that mkinitrd creates, but I don't know what setuproot and switchroot do and how to make them use my aufs as the new root. Apparently, nobody else here knows either. (EDIT: I take that back.) I've tried building a LiveCD (using linux-live-6.3.0) and then modifying the Bash /linuxrc script from the generated initrd, and I got the mounts correct, but the final /sbin/init complains about /dev/initctl. Specifically, my /linuxrc mounts the aufs at /union. The last few lines of /linuxrc effectively do the following: cd /union mkdir -p mnt/live pivot_root . mnt/live exec sbin/chroot . sbin/init </dev/console >/dev/console 2>&1 When init starts, it outputs something like init: /dev/initctl: No such file or directory. What is supposed to create this FIFO? I found no such filename in the original linuxrc and liblinuxlive scripts. I tried creating it via "mkfifo /dev/initctl", but then init complained about a timeout opening or writing to the FIFO. Would appreciate any help or pointers. Thanks.

  Read the article

• how do i write an init script for django-supervisor

  - by amateur

  pardon me as this is my first time attempting to write a init script for centos 5. I am using django + supervisor to manage my celery workers, scheduler. Now, this is my naive simple attempt /etc/init.d/supervisor #!/bin/sh # # /etc/rc.d/init.d/supervisord # # Supervisor is a client/server system that # allows its users to monitor and control a # number of processes on UNIX-like operating # systems. # # chkconfig: - 64 36 # description: Supervisor Server # processname: supervisord # Source init functions /home/foo/virtualenv/property_env/bin/python /home/foo/bar/manage.py supervisor --daemonize inside my supervisor.conf: [program:celerybeat] command=/home/property/virtualenv/property_env/bin/python manage.py celerybeat --loglevel=INFO --logfile=/home/property/property_buyer/logfiles/celerybeat.log [program:celeryd] command=/home/foo/virtualenv/property_env/bin/python manage.py celeryd --loglevel=DEBUG --logfile=/home/foo/bar/logfiles/celeryd.log --concurrency=1 -E [program:celerycam] command=/home/foo/virtualenv/property_env/bin/python manage.py celerycam I couldn't get it to work. 2013-08-06 00:21:03,108 INFO exited: celerybeat (exit status 2; not expected) 2013-08-06 00:21:06,114 INFO spawned: 'celeryd' with pid 11772 2013-08-06 00:21:06,116 INFO spawned: 'celerycam' with pid 11773 2013-08-06 00:21:06,119 INFO spawned: 'celerybeat' with pid 11774 2013-08-06 00:21:06,146 INFO exited: celerycam (exit status 2; not expected) 2013-08-06 00:21:06,147 INFO gave up: celerycam entered FATAL state, too many start retries too quickly 2013-08-06 00:21:06,147 INFO exited: celeryd (exit status 2; not expected) 2013-08-06 00:21:06,152 INFO gave up: celeryd entered FATAL state, too many start retries too quickly 2013-08-06 00:21:06,152 INFO exited: celerybeat (exit status 2; not expected) 2013-08-06 00:21:07,153 INFO gave up: celerybeat entered FATAL state, too many start retries too quickly I believe it is the init script, but please help me understand what is wrong.

  Read the article

• CentOS: Init scripts failing to start for some unknown reason

  - by user705142

  I'm running CentOS 6.2 - I've just migrated some applications over to a failover server, and copied their init scripts into /etc/init.d. I've made them executable, added them to chkconfig, with chkconfig -add, set their levels, made sure they're residing in /etc/rc.d/ - made sure I can execute them from rc2.d etc. The permissions are the same on both servers. They're also running in the same order as on the primary server Yet on reboot they don't start. Any ideas? The offenders are these: jetty 0:off 1:off 2:on 3:on 4:on 5:on 6:off smart 0:off 1:off 2:on 3:on 4:on 5:on 6:off /etc/init.d: -rwxr-xr-x. 1 root root 14456 Mar 13 20:21 jetty -rwxrwxrwx. 1 root root 5829 Mar 29 09:58 smart /etc/rc.d/rc3.d lrwxrwxrwx. 1 root root 15 Mar 29 19:21 S99jetty -> ../init.d/jetty lrwxrwxrwx. 1 root root 11 Mar 26 17:12 S99local -> ../rc.local lrwxrwxrwx. 1 root root 15 Mar 29 19:21 S99smart -> ../init.d/smart I've checked, and I'm in run level 3. I've checked their logs, and there's no indication that that they've been started. I can start them manually easily - and other services are starting normally. I'm completely out of ideas really.

  Read the article

• How does the os know which paramater to pass to /etc/init.d/

  - by iDev247

  I've been working with linux for a while but in a rather simple manner. I understand that scripts in init.d are executed when the os starts but how exactly does it works? How does the os know which paramater to pass to a script? To start apache I would do sudo /etc/init.d/apache2 start. If I run sudo /etc/init.d/apache2 it doesn't work without the start. How does the os pass start to the script?

  Read the article

• Ubuntu init.d script not being called on startup

  - by Mike

  I've got a script in ubuntu 9.04 in init.d that I've set to run on start on with update-rc.d using update-rc.d init_test defaults 99. All of the symlinks are there and the permissions appear to be correct -rwxr-xr-x 1 root root 642 2010-10-28 16:44 init_test mike@xxxxxxxxxx:~$ find /etc -name S99* | grep init_test find: /etc/rc5.d/S99init_test find: /etc/rc4.d/S99init_test find: /etc/rc2.d/S99init_test find: /etc/rc3.d/S99init_test The script runs through source and ./ without issue and behaves correctly. Here is the source of the script: #!/bin/bash ### BEGIN INIT INFO # Provides: init test script # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO start() { echo "hi" echo "start called" >> /tmp/test.log return } stop() { echo "Stopping" } echo "Script called" >> /tmp/test.log case "$1" in start) start ;; stop) stop ;; *) echo "Usage: {start|stop|restart}" exit 1 ;; esac exit $? When the machine starts, I don't see "script called" or "start called" in the test.log at all. Is there anything obvious I'm messing up?

  Read the article

• Managing per-user rc.d init scripts

  - by Steve Schnepp

  I want to delegate SysV init scripts to each user. Like the SysV init, each item in ${HOME}/rc.d starting with S will be launched on server start-up with the start argument. The same for the server shut-down with the one starting with K and with the stop argument. I thought about scripting it myself, but maybe there is already some kind of implementation out there1. In summary it would be a script in /etc/init.d/ that iterates through all the users and launches runparts as the user on the relevant scripts. The platform here is a Linux (Debian flavour), but I think the solution would be quite portable among various Unix-like platforms. Update: The point here is for users to be able to create their own init scripts that should be launch on their behalf when the system boots up. As Dan Carley pointed out, the services won't be able to access any system asset (priviledged ports, system logs, ...). 1. This way I don't have to think that much about all the subtle security implications such as script timeouts for example...

  Read the article

• Word 2013: Get the page number for the previous page

  - by Mike Anthony

  I'm trying to accomplish something very simple in Word 2013, but the feature does not seem to be available, nor can I work it out with field codes. I simply want to include, on multiple pages, "continued from page n". In terms of field codes, I have tried this: { = PAGE - 1 \* MERGEFORMAT } It just tells me that PAGE is not a defined bookmark. Is there any way that this can be done? Edit: Per documentation I found somewhere, I also tried this - but with no luck: { = { PAGE } - 1 } This just threw Syntax Error, { back, which leads me to assume that it's incompatible with newer versions of Word.

  Read the article

• Sensitive data in init scripts

  - by Steve Jorgensen

  I'm adapting some examples I've found by Googling to build an init script to run a VirtualBox OSE virtual machine as a daemon. I would like to specify a password for VNC access to the VM, and this must be given as an argument to the VBoxHeadless command. Conventionally, init scripts are readable by standard users, and this seems like a useful convention, but I also don't want the VNC password for this VM to be stored in easily accessible plain text. What's the most appropriate/conventional way to handle this kind of situation? Maybe put a root-readable supporting data file someplace, and have the init script load the value from there?

  Read the article

• Kill xserver from command line (init 3/5 does not work)

  - by John Smith

  Hi, I'm running Linux Mint 10, although I've had this same issue with other variants of Linux. I've been told/found while researching that if the X server hangs or otherwise errors, one can drop to a root prompt, usually at another tty, and execute init 3 (to drop to single user mode) and then init 5 to return to the default, graphical session. Needless to say, I've tried this before in multiple configurations on multiple machines to no avail. The only feedback I receive form executing those two commands is a listing of VMWare services (from a kernel module) that are stopped and then restarted. Note: If I run startx (either before or after init 3), then I am told that the xserver is still running and that I should remove /tmp/.X0-lock. Having tried that, it removes that error message, but claims that the xserver cannot be attached as another instance is running. How do I kill the xserver completely? Can I killall some process name?

  Read the article

• Kill xserver from command line (init 3/5 does not work)

  - by Richard Martinez

  I'm running Linux Mint 10, although I've had this same issue with other variants of Linux. I've been told/found while researching that if the X server hangs or otherwise errors, one can drop to a root prompt, usually at another tty, and execute init 3 (to drop to single user mode) and then init 5 to return to the default, graphical session. Needless to say, I've tried this before in multiple configurations on multiple machines to no avail. The only feedback I receive form executing those two commands is a listing of VMWare services (from a kernel module) that are stopped and then restarted. Note: If I run startx (either before or after init 3), then I am told that the xserver is still running and that I should remove /tmp/.X0-lock. Having tried that, it removes that error message, but claims that the xserver cannot be attached as another instance is running. How do I kill the xserver completely? Can I killall some process name?

  Read the article

• Call to daemon in a /etc/init.d script is blocking, not running in background

  - by tony

  I have a Perl script that I want to daemonize. Basically this perl script will read a directory every 30 seconds, read the files that it finds and then process the data. To keep it simple here consider the following Perl script (called synpipe_server, there is a symbolic link of this script in /usr/sbin/) : #!/usr/bin/perl use strict; use warnings; my $continue = 1; $SIG{'TERM'} = sub { $continue = 0; print "Caught TERM signal\n"; }; $SIG{'INT'} = sub { $continue = 0; print "Caught INT signal\n"; }; my $i = 0; while ($continue) { #do stuff print "Hello, I am running " . ++$i . "\n"; sleep 3; } So this script basically prints something every 3 seconds. Then, as I want to daemonize this script, I've also put this bash script (also called synpipe_server) in /etc/init.d/ : #!/bin/bash # synpipe_server : This starts and stops synpipe_server # # chkconfig: 12345 12 88 # description: Monitors all production pipelines # processname: synpipe_server # pidfile: /var/run/synpipe_server.pid # Source function library. . /etc/rc.d/init.d/functions pname="synpipe_server" exe="/usr/sbin/synpipe_server" pidfile="/var/run/${pname}.pid" lockfile="/var/lock/subsys/${pname}" [ -x $exe ] || exit 0 RETVAL=0 start() { echo -n "Starting $pname : " daemon ${exe} RETVAL=$? PID=$! echo [ $RETVAL -eq 0 ] && touch ${lockfile} echo $PID > ${pidfile} } stop() { echo -n "Shutting down $pname : " killproc ${exe} RETVAL=$? echo if [ $RETVAL -eq 0 ]; then rm -f ${lockfile} rm -f ${pidfile} fi } restart() { echo -n "Restarting $pname : " stop sleep 2 start } case "$1" in start) start ;; stop) stop ;; status) status ${pname} ;; restart) restart ;; *) echo "Usage: $0 {start|stop|status|restart}" ;; esac exit 0 So, (if I have well understood the doc for daemon) the Perl script should run in the background and the output should be redirected to /dev/null if I execute : service synpipe_server start But here is what I get instead : [root@master init.d]# service synpipe_server start Starting synpipe_server : Hello, I am running 1 Hello, I am running 2 Hello, I am running 3 Hello, I am running 4 Caught INT signal [ OK ] [root@master init.d]# So it starts the Perl script but runs it without detaching it from the current terminal session, and I can see the output printed in my console ... which is not really what I was expecting. Moreover, the PID file is empty (or with a line feed only, no pid returned by daemon). Does anyone have any idea of what I am doing wrong ? EDIT : maybe I should say that I am on a Red Hat machine. Scientific Linux SL release 5.4 (Boron) Would it do the job if instead of using the daemon function, I use something like : nohup ${exe} >/dev/null 2>&1 & in the init script ?

  Read the article

• Explanation of the init.d/scripts Fedora

  - by Shahmir Javaid

  Below is a copy of vsftpd, i need some explanations of some of the scripts mentioned below in this script: #!/bin/bash # ### BEGIN INIT INFO # Provides: vsftpd # Required-Start: $local_fs $network $named $remote_fs $syslog # Required-Stop: $local_fs $network $named $remote_fs $syslog # Short-Description: Very Secure Ftp Daemon # Description: vsftpd is a Very Secure FTP daemon. It was written completely from # scratch ### END INIT INFO # vsftpd This shell script takes care of starting and stopping # standalone vsftpd. # # chkconfig: - 60 50 # description: Vsftpd is a ftp daemon, which is the program \ # that answers incoming ftp service requests. # processname: vsftpd # config: /etc/vsftpd/vsftpd.conf # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network RETVAL=0 prog="vsftpd" start() { # Start daemons. # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 1 [ -x /usr/sbin/vsftpd ] || exit 1 if [ -d /etc/vsftpd ] ; then CONFS=`ls /etc/vsftpd/*.conf 2>/dev/null` [ -z "$CONFS" ] && exit 6 for i in $CONFS; do site=`basename $i .conf` echo -n $"Starting $prog for $site: " daemon /usr/sbin/vsftpd $i RETVAL=$? echo if [ $RETVAL -eq 0 ]; then touch /var/lock/subsys/$prog break else if [ -f /var/lock/subsys/$prog ]; then RETVAL=0 break fi fi done else RETVAL=1 fi return $RETVAL } stop() { # Stop daemons. echo -n $"Shutting down $prog: " killproc $prog RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog return $RETVAL } # See how we were called. case "$1" in start) start ;; stop) stop ;; restart|reload) stop start RETVAL=$? ;; condrestart|try-restart|force-reload) if [ -f /var/lock/subsys/$prog ]; then stop start RETVAL=$? fi ;; status) status $prog RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|try-restart|force-reload|status}" exit 1 esac exit $RETVAL Question I What the hell is the difference between the && and || signs in the below commands, and is it just an easy way to do a simple if check or is it completely different to a if[..something..]; then ..something.. fi: # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 1 [ -x /usr/sbin/vsftpd ] || exit 1 Question II i get what -eq and -gt is (equal to, greater than) but is there a simple website that explains what -x, -d and -f are? Any help would be apreciated Running Fedora 12 on my OS. Script copied from /etc/init.d/vsftpd Question III It says required starts are $local_fs $network $named $remote_fs $syslog but i cant see any where it checks for those.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >