Search Results

Search found 359 results on 15 pages for 'panic'.

Page 1/15 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• reboot on kernel panic and drac

  - by user48116

  Does anyone know if it is possible to have a DRAC5 make a screenshot of the console when Linux reboots (automatically) due to a kernel panic? Our current system doesn't reboot automatically when it panics, so we can manually make a screenshot using the DRAC when it crashes. However, I'd like to configure it so it will reboot automatically when a panic happens, but still be able to log the cause of the crash.

  Read the article

• Ubuntu Kernel Panic on Inserting Network Cable

  - by Skizz

  I've been having a recurring kernel panic with my Ubuntu 9.04 installation (see other posts by me). Today, I was fiddling around trying to get some cable attached when the system panicked. Looking at the layout, the only cable in the vicinity was the network cable. Upon further investigation, it seems that the system reliably panics whenever I insert a network cable. Removing the cable does not cause the panic. How do I stop the system panicking when I insert the network cable? If more information is needed, please add comments/answers and I'll post the required data.

  Read the article

• Kernel Panic every time I open a print queue

  - by Gray

  Every time I open any printer queue I get a kernel panic and have to reboot. It's quite frustrating. I've tried removing/adding printers, clearing all caches with Onyx, repairing permissions, all manner of things to no avail. Any tips would be greatly appreciated! ==== CRASH REPORT ==== Interval Since Last Panic Report: 25551 sec Panics Since Last Report: 1 Anonymous UUID: 322E8128-0027-4C2F-9264-6A9D9F1BD13E Thu Aug 27 10:04:23 2009 panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x00233080, type 14=page fault, registers: CR0: 0x8001003b, CR2: 0x00000008, CR3: 0x01157000, CR4: 0x00000660 EAX: 0x00000000, EBX: 0x03f05df0, ECX: 0x2ad007fd, EDX: 0x2ad02d2d CR2: 0x00000008, EBP: 0x2e6abb78, ESI: 0x03f136a0, EDI: 0x03f13640 EFL: 0x00010206, EIP: 0x00233080, CS: 0x00000008, DS: 0x01a70010 Error code: 0x00000000 Backtrace (CPU 0), Frame : Return Address (4 potential args on stack) 0x2e6ab998 : 0x12b4c6 (0x45f91c 0x2e6ab9cc 0x13355c 0x0) 0x2e6ab9e8 : 0x1ab0fe (0x469a98 0x233080 0xe 0x469248) 0x2e6abac8 : 0x1a1713 (0x2e6abae0 0x206 0x2e6abb78 0x233080) 0x2e6abad8 : 0x233080 (0xe 0x3e10048 0x4570010 0x96d0010) 0x2e6abb78 : 0x27866c (0x3f05df0 0x0 0x4ec4 0x3f136a0) 0x2e6abbc8 : 0x249d53 (0x3f13640 0x3e17464 0x55c160 0x3034ed5c) 0x2e6abdc8 : 0x24bb59 (0x3034ed00 0x28 0x9 0x0) 0x2e6abde8 : 0x270186 (0x2e6abe70 0x2e6abe44 0x8 0x0) 0x2e6abe68 : 0x22ca5f (0x3034ed00 0x3034ed00 0x2e6abea8 0xffffffff) 0x2e6abea8 : 0x21b36e (0x1e 0x3034ed00 0x246 0x0) 0x2e6abec8 : 0x217591 (0x3f65c04 0x1e 0x3034ed00 0x3ef2c2) 0x2e6abef8 : 0x217cea (0x530d64 0x4037808 0x3034ed40 0x2e6abf4c) 0x2e6abf68 : 0x217f1b (0x3f65c04 0x3034ed00 0x0 0x530de8) 0x2e6abfc8 : 0x1a14fc (0x530dc0 0x0 0x1a40b5 0x3dd95d0) Backtrace terminated-invalid frame pointer 0 BSD process name corresponding to current thread: kernel_task Mac OS version: 9L31a Kernel version: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 System model name: MacBook4,1 (Mac-F22788A9) System uptime in nanoseconds: 30555146093771 unloaded kexts: com.apple.iokit.IOUSBMassStorageClass 2.0.8 - last unloaded 26709525128459 loaded kexts: com.vmware.kext.vmnet 2.0.5 com.vmware.kext.vmioplug 2.0.5 com.vmware.kext.vmci 2.0.5 com.vmware.kext.vmx86 2.0.5 com.apple.driver.iTunesPhoneDriver 1.0 - last loaded 981750246502 com.apple.iokit.IOUSBMassStorageClass 2.0.8 com.apple.filesystems.msdosfs 1.5.5 com.apple.iokit.IOBluetoothSerialManager 2.1.8f2 com.apple.filesystems.autofs 2.0.2 com.apple.driver.AppleHWSensor 1.9d0 com.apple.driver.AppleHDA 1.7.1a2 com.apple.driver.AppleUpstreamUserClient 2.7.5 com.apple.Dont_Steal_Mac_OS_X 6.0.3 com.apple.iokit.CHUDUtils 201 com.apple.iokit.CHUDProf 211 com.apple.driver.AppleIntelGMAX3100 5.4.8 com.apple.driver.AppleIntelGMAX3100FB 5.4.8 com.apple.driver.AppleHDAController 1.7.1a2 com.apple.iokit.IOFireWireIP 1.7.7 com.apple.driver.AppleIRController 113 com.apple.driver.AudioIPCDriver 1.0.6 com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17 com.apple.driver.AppleLPC 1.3.1 com.apple.driver.AppleBacklight 1.6.0 com.apple.driver.SMCMotionSensor 2.1.1d2 com.apple.driver.AppleUSBTrackpad 1.7.4f1 com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1 com.apple.driver.AppleUSBTCKeyboard 1.7.4f1 com.apple.driver.CSRUSBBluetoothHCIController 2.1.8f2 com.apple.driver.AppleUSBMergeNub 3.4.6 com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1 com.apple.iokit.SCSITaskUserClient 2.1.1 com.apple.driver.XsanFilter 2.7.91 com.apple.iokit.IOATAPIProtocolTransport 1.5.3 com.apple.iokit.IOAHCIBlockStorage 1.2.2 com.apple.driver.AppleUSBHub 3.4.9 com.apple.iokit.IOUSBUserClient 3.4.9 com.apple.driver.AppleAHCIPort 1.7.0 com.apple.driver.AppleIntelPIIXATA 2.0.1 com.apple.driver.AppleFWOHCI 3.9.7 com.apple.driver.AppleUSBEHCI 3.4.6 com.apple.driver.AppleEFINVRAM 1.2.0 com.apple.iokit.AppleYukon2 3.1.13b2 com.apple.driver.AirPortBrcm43xx 366.91.21 com.apple.driver.AppleUSBUHCI 3.3.5 com.apple.driver.AppleSmartBatteryManager 158.10.5 com.apple.driver.AppleRTC 1.2.3 com.apple.driver.AppleHPET 1.4 com.apple.driver.AppleACPIPCI 1.2.5 com.apple.driver.AppleACPIButtons 1.2.5 com.apple.driver.AppleSMBIOS 1.4 com.apple.driver.AppleACPIEC 1.2.5 com.apple.driver.AppleAPIC 1.4 com.apple.security.seatbelt 107.12 com.apple.nke.applicationfirewall 1.6.77 com.apple.security.TMSafetyNet 3 com.apple.driver.AppleIntelCPUPowerManagement 76.2.0 com.apple.driver.DiskImages 199 com.apple.BootCache 30.4 com.apple.iokit.IOSerialFamily 9.4 com.apple.driver.DspFuncLib 1.7.1a2 com.apple.iokit.CHUDKernLib 201 com.apple.iokit.IOHDAFamily 1.7.1a2 com.apple.iokit.IOAudioFamily 1.6.9fc5 com.apple.kext.OSvKernDSPLib 1.1 com.apple.driver.IOPlatformPluginFamily 3.4.0a17 com.apple.iokit.IONDRVSupport 1.7.3 com.apple.iokit.IOGraphicsFamily 1.7.3 com.apple.driver.AppleSMC 2.3.1d1 com.apple.iokit.IOUSBHIDDriver 3.4.6 com.apple.driver.AppleUSBBluetoothHCIController 2.1.8f2 com.apple.iokit.IOBluetoothFamily 2.1.8f2 com.apple.driver.AppleUSBComposite 3.2.0 com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1 com.apple.iokit.IOBDStorageFamily 1.5 com.apple.iokit.IODVDStorageFamily 1.5 com.apple.iokit.IOCDStorageFamily 1.5 com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1 com.apple.iokit.IOAHCIFamily 1.5.0 com.apple.iokit.IOATAFamily 2.0.1 com.apple.iokit.IOFireWireFamily 3.4.9 com.apple.iokit.IO80211Family 216.1 com.apple.iokit.IONetworkingFamily 1.6.1 com.apple.iokit.IOUSBFamily 3.4.9 com.apple.driver.AppleEFIRuntime 1.2.0 com.apple.iokit.IOSMBusFamily 1.1 com.apple.iokit.IOStorageFamily 1.5.6 com.apple.iokit.IOHIDFamily 1.5.5 com.apple.driver.AppleACPIPlatform 1.2.5 com.apple.iokit.IOACPIFamily 1.2.0 com.apple.iokit.IOPCIFamily 2.6 Macbook Black Mac OS X (10.5.8)

  Read the article

• md/raid:md2: cannot start dirty degraded array, kernel panic

  - by nl-x

  After having made use of a remote power switch, my server did not come back online. When I went to the datacenter and reboot the computer on the spot I see the server booting (I see the centos progress bar with running almost all the way to the end) and eventually giving the following messages: md/raid:md2: cannot start dirty degraded array. md/raid:md2: failed to run raid set. md: pers->run() failed ... md/raid:md2: cannot start dirty degraded array. md/raid:md2: failed to run raid set. md: pers->run() failed ... Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init not tainted 2.6.32-279.1.1.el6.i686 #1 Call Trace: [<c083bfbc>] ? panic+0x68/0x11c [<c045a501>] ? do_exit+0x741/0x750 [<c045a54c>] ? do_group_exit+0x3c/0xa0 [<c045a5c1>] ? sys_exit_group+0x11/0x20 [<c083eba4>] ? syscall_call+0x7/0xb [<c083007b>] ? cmos_wake_setup+0x62/0x112 The server runs CentOS and has software raid, and I don't have backups of the raid settings. The only backup I have is of /home and the database dumps. (Glad to at least have those though.) Since the server is an old Dell PowerEdge 1750 with no CD-ROM drive, I have no way of booting the machine from a boot disk. I also remember in the past that the server also wouldn't boot from a bootable USB disk. So the only way I know how to boot the server is to go to the datacenter, pick up the server and take it to the office. Screw open the server. Attach a cdrom drive to an IDE slot on the motherboard. And then boot it. I am hoping you guys could help me avoid this. I have looked a bit through the boot options and I found the following boot options. When CentOS is about to boot and interrupt the boot-countdown: CentOS (2.6.32-279.1.1.el63.i686) CentOS Linux (2.6.32-71.29.1.el6.i686) centos (2.6.32-71.el6.i686) I think the first configuration is the default one, because choosing that gets me to the above mentioned kernel panic. The other ones end with something like "Sleeping forever". I can press 'e' to edit boot commands, press 'a' to modify kernel arguments and press 'c' for grub command line. The command line gives a grub prompt. But I have no idea how to get the system to boot without (trying to) access the dirty partitions. What I want to do is off course: - boot the machine - check hard drive for errors - mark the drive as clean

  Read the article

• Get details / solve issue with a kernel panic?

  - by Joseph

  I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

  Read the article

• Mac OS X kernel panic after TM restore

  - by Sev

  I changed my HD in my MacBook Pro, and restored from Time Machine backup. Now I keep getting kernel panic error everytime I restart. I booted from the DVD and ran a few tests, noticed that HD and RAM are being detected, also did a repair on the disk through disk utility, still getting same error. Any suggestions?

  Read the article

• Kernel Panic with gentoo boot (root partition not found)

  - by JB87

  Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) grub.conf default 0 timeout 30 splashimage=(hd0,0)/boot/grub/splash.xpm.gz title Gentoo Linux 2.6.34-r6 root (hd0,0) kernel /boot/kernel-2.6.34-gentoo-r6 root=/dev/ram0 real_root=/dev/sda3 vim:ft=conf: fdisk -l Device Boot Start End Blocks Id System /dev/sda1 * 1 5 40131 83 Linux /dev/sda2 6 71 530145 82 Linux swap / Solaris /dev/sda3 72 1044 7815622+ 83 Linux so im having trouble getting gentoo to boot, how can I change it from looking for root at block(1,0) to block(0,0) which is where my root partition is created? I though setting it to look to that hdd in grub is all I needed? that is my first guess to what might be causing the problem but not sure why it is giving this error. please advise...

  Read the article

• Frequent Kernel Panic on CentOS 6.5

  - by Manuel Sopena Ballesteros

  I have a webserver with the configuration below: VMWare ESXi environemt CPanel installed CentOS release 6.5 (Final) 4 CPUs 2G RAM 2x VM disks 100G each LVM system My issue is I am getting kernel panic quite frequently. These is a list of some processes blocked I could see from the console: mysqld queueprocd httpd suphp vmtoolsd loop0 auditd this is my sar logs Linux 2.6.32-431.3.1.el6.x86_64 (test01) 08/22/2014 _x86_64_ (4 CPU) 12:00:01 AM CPU %user %nice %system %iowait %steal %idle 12:10:01 AM all 26.86 0.01 0.98 0.57 0.00 71.57 12:20:01 AM all 1.78 0.02 1.03 0.08 0.00 97.09 12:30:01 AM all 26.34 0.02 0.85 0.05 0.00 72.74 12:40:01 AM all 27.12 0.01 1.11 1.22 0.00 70.54 12:50:01 AM all 1.59 0.02 0.94 0.13 0.00 97.32 01:00:01 AM all 26.10 0.01 0.77 0.04 0.00 73.07 01:10:01 AM all 27.51 0.01 1.16 0.14 0.00 71.18 01:20:01 AM all 1.80 0.07 1.06 0.08 0.00 96.99 01:30:01 AM all 26.19 0.01 0.78 0.05 0.00 72.96 01:40:01 AM all 26.62 0.02 0.87 0.05 0.00 72.45 01:50:02 AM all 1.35 0.01 0.87 0.02 0.00 97.75 02:00:01 AM all 26.11 0.02 0.69 0.02 0.00 73.17 02:10:01 AM all 26.73 0.02 0.89 0.14 0.00 72.21 02:20:01 AM all 1.45 0.01 0.92 0.04 0.00 97.58 02:30:01 AM all 26.59 0.01 1.06 0.03 0.00 72.31 02:40:01 AM all 26.27 0.01 0.72 0.05 0.00 72.95 02:50:01 AM all 0.86 0.01 0.50 0.09 0.00 98.53 03:00:01 AM all 25.61 0.02 0.39 0.03 0.00 73.96 03:10:01 AM all 26.30 0.08 0.66 0.14 0.00 72.82 03:20:01 AM all 0.81 0.01 0.51 0.04 0.00 98.63 03:30:02 AM all 26.15 0.02 0.53 0.07 0.00 73.24 03:40:01 AM all 26.06 0.01 0.47 0.04 0.00 73.42 03:50:01 AM all 0.96 0.02 0.51 0.03 0.00 98.48 Average: all 17.69 0.02 0.79 0.14 0.00 81.36 06:58:14 AM LINUX RESTART 07:00:01 AM CPU %user %nice %system %iowait %steal %idle 07:10:01 AM all 1.04 0.02 0.57 0.95 0.00 97.42 07:20:02 AM all 0.66 0.01 0.39 0.06 0.00 98.87 07:30:01 AM all 25.71 0.01 0.45 0.16 0.00 73.67 07:40:01 AM all 25.88 0.01 0.35 0.08 0.00 73.68 As you can see the server became unresponsive at 03.50 AM and I had to reset the VM at 06.58 AM to fix it. sar -d 03:00:01 PM dev8-16 0.16 0.01 3.37 20.78 0.00 12.40 9.29 0.15 03:00:01 PM dev8-0 4.08 5.72 77.50 20.38 0.06 15.15 3.13 1.28 03:00:01 PM dev253-0 10.37 5.74 80.87 8.35 0.13 12.52 1.24 1.29 03:00:01 PM dev253-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 03:10:01 PM dev8-16 0.27 0.17 3.17 12.22 0.00 11.49 7.95 0.22 03:10:01 PM dev8-0 6.37 18.98 136.19 24.34 0.05 7.25 2.18 1.39 03:10:01 PM dev253-0 17.91 19.15 137.94 8.77 0.13 7.11 0.78 1.41 03:10:01 PM dev253-1 0.18 0.00 1.41 8.00 0.00 9.09 0.52 0.01 03:10:01 PM DEV tps rd_sec/s wr_sec/s avgrq-sz avgqu-sz await svctm %util 03:20:01 PM dev8-16 0.17 0.23 2.04 13.39 0.00 6.07 5.29 0.09 03:20:01 PM dev8-0 3.83 18.57 78.45 25.35 0.05 13.25 2.73 1.05 03:20:01 PM dev253-0 10.30 18.80 80.49 9.64 0.14 13.89 1.03 1.06 03:20:01 PM dev253-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 03:30:01 PM dev8-16 0.26 0.16 4.59 18.56 0.00 6.44 5.54 0.14 03:30:01 PM dev8-0 5.97 24.07 117.83 23.77 0.05 8.53 2.13 1.27 03:30:01 PM dev253-0 15.90 24.23 122.42 9.22 0.12 7.71 0.81 1.29 03:30:01 PM dev253-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 03:40:01 PM dev8-16 0.20 0.00 2.32 11.44 0.00 8.35 5.90 0.12 03:40:01 PM dev8-0 4.39 19.58 77.94 22.24 0.06 12.87 2.12 0.93 03:40:01 PM dev253-0 10.25 19.58 80.25 9.74 0.12 11.63 0.91 0.94 03:40:01 PM dev253-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 03:50:01 PM dev8-16 0.23 0.50 2.32 12.44 0.00 6.27 5.13 0.12 03:50:01 PM dev8-0 5.09 9.00 95.04 20.45 0.04 7.36 2.10 1.07 03:50:01 PM dev253-0 12.47 9.50 96.82 8.53 0.08 6.76 0.87 1.08 03:50:01 PM dev253-1 0.07 0.00 0.54 8.00 0.00 14.10 0.40 0.00 04:00:01 PM dev8-16 0.21 0.00 2.04 9.89 0.00 7.00 5.87 0.12 04:00:01 PM dev8-0 4.68 1.64 94.70 20.57 0.05 10.71 2.41 1.13 04:00:01 PM dev253-0 12.27 1.64 96.74 8.02 0.12 9.95 0.93 1.14 sar -q 01:00:01 AM 6 205 2.02 1.32 0.81 01:10:01 AM 3 187 0.08 0.72 0.86 01:20:01 AM 2 187 0.04 0.18 0.49 01:30:01 AM 4 205 2.04 1.34 0.82 01:40:01 AM 2 185 0.02 0.68 0.83 01:50:02 AM 1 185 0.08 0.15 0.45 02:00:01 AM 5 202 2.02 1.30 0.78 02:10:01 AM 4 185 0.11 0.72 0.84 02:20:01 AM 1 183 0.17 0.15 0.45 02:30:01 AM 5 206 2.03 1.32 0.79 02:40:01 AM 2 184 0.08 0.70 0.83 02:50:01 AM 1 183 0.00 0.10 0.43 03:00:01 AM 7 205 2.03 1.32 0.78 03:10:01 AM 2 194 0.34 0.73 0.83 03:20:01 AM 1 184 0.00 0.13 0.44 03:30:02 AM 4 201 2.04 1.32 0.78 03:40:01 AM 2 193 0.06 0.67 0.81 03:50:01 AM 1 183 0.06 0.12 0.43 Average: 3 192 0.68 0.70 0.69 06:58:14 AM LINUX RESTART 07:00:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 07:10:01 AM 2 181 0.00 0.09 0.11 07:20:02 AM 1 179 0.00 0.00 0.04 07:30:01 AM 4 197 2.12 1.33 0.58 sar -r Linux 2.6.32-431.3.1.el6.x86_64 (test01) 08/22/2014 _x86_64_ (4 CPU) 12:00:01 AM kbmemfree kbmemused %memused kbbuffers kbcached kbcommit %commit 12:10:01 AM 227484 1694468 88.16 117444 917004 635308 10.50 12:20:01 AM 219692 1702260 88.57 119556 920540 630940 10.43 12:30:01 AM 196248 1725704 89.79 121376 923592 695048 11.49 12:40:01 AM 127524 1794428 93.36 125004 1016196 633048 10.46 12:50:01 AM 127156 1794796 93.38 128212 1014536 624992 10.33 01:00:01 AM 110764 1811188 94.24 129964 1001608 700016 11.57 01:10:01 AM 160560 1761392 91.65 132260 973472 628640 10.39 01:20:01 AM 133076 1788876 93.08 134144 982608 655524 10.83 01:30:01 AM 121512 1800440 93.68 135548 985676 700500 11.58 01:40:01 AM 140640 1781312 92.68 137220 988576 628280 10.38 01:50:02 AM 139160 1782792 92.76 138688 990672 625224 10.33 02:00:01 AM 106112 1815840 94.48 139940 993976 700360 11.57 02:10:01 AM 155400 1766552 91.91 142112 971864 625656 10.34 02:20:01 AM 154056 1767896 91.98 143732 975556 621352 10.27 02:30:01 AM 110856 1811096 94.23 145032 978288 709360 11.72 02:40:01 AM 140200 1781752 92.71 146568 980656 624872 10.33 02:50:01 AM 137600 1784352 92.84 148940 984484 621948 10.28 03:00:01 AM 105032 1816920 94.54 150208 985736 706060 11.67 03:10:01 AM 168996 1752956 91.21 154708 941500 656312 10.85 03:20:01 AM 169408 1752544 91.19 156096 944100 621780 10.28 03:30:02 AM 132360 1789592 93.11 157724 951612 701296 11.59 03:40:01 AM 159012 1762940 91.73 158940 942560 656292 10.85 03:50:01 AM 163192 1758760 91.51 160312 944576 624544 10.32 Average: 148089 1773863 92.29 140162 969973 653363 10.80 06:58:14 AM LINUX RESTART 07:00:01 AM kbmemfree kbmemused %memused kbbuffers kbcached kbcommit %commit 07:10:01 AM 1016628 905324 47.10 85568 447556 600932 9.93 07:20:02 AM 1009996 911956 47.45 87616 451200 596156 9.85 07:30:01 AM 961128 960824 49.99 89164 464332 658912 10.89 07:40:01 AM 973376 948576 49.35 90880 473084 600176 9.92 dmesg does not show any relevant information. I don't see any bottleneck in sar, any idea what can I check next? thank you very much

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I have Mac OS X 10.6.3 and VMWare 7.1. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• kernel panic after LVM setup

  - by Manuel Sopena Ballesteros

  I broke my webserver... My setup is: VMWare ESXi environemt CPanel installed CentOS release 6.5 (Final) 4 CPUs 2G RAM 2x VM disks 100G each LVM system This was my previous storage settings (the server was working fine at this time): # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_test01-lv_root 95G 1.4G 88G 2% / tmpfs 939M 0 939M 0% /dev/shm /dev/sdb1 99G 188M 94G 1% /tmp /dev/sda1 485M 54M 407M 12% /boot My web developer asked me to merge /tmp and / disks so this is what I did: Delete /dev/sdb1 partition using fdisk Create a new partition as LVM on /dev/sdb1 using fdisk Create a new physical volume -- pvcreate /dev/sdb1 Extend volume group -- vgextend /dev/sdb1 vg_test01 Extend logical volume -- lvextend -l +100%FREE /dev/vg_test01/lv_root Resize filesystem -- resize2fs /dev/vg_test01/lv_root This is the new configuration: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_test01-lv_root 213G 105G 97G 52% / tmpfs 939M 0 939M 0% /dev/shm /dev/sda1 485M 54M 407M 12% /boot /usr/tmpDSK 4.0G 145M 3.6G 4% /tmp Since I have the new settings my web server is throwing kernel panics quite often (around every 2 days). The message says: INFO: task <taskName>:<pid> blocked for more than 120 seconds. The list of process affected that I can see from the console are: mysqld queueprocd httpd suphp vmtoolsd loop0 auditd The only way I can fix this is reseting (cold reboot) the VM. I don't think it is a hardware issue as sar is not showing any bottleneck: Linux 2.6.32-431.3.1.el6.x86_64 (test01) 08/22/2014 _x86_64_ (4 CPU) 12:00:01 AM CPU %user %nice %system %iowait %steal %idle 12:10:01 AM all 26.86 0.01 0.98 0.57 0.00 71.57 12:20:01 AM all 1.78 0.02 1.03 0.08 0.00 97.09 12:30:01 AM all 26.34 0.02 0.85 0.05 0.00 72.74 12:40:01 AM all 27.12 0.01 1.11 1.22 0.00 70.54 12:50:01 AM all 1.59 0.02 0.94 0.13 0.00 97.32 01:00:01 AM all 26.10 0.01 0.77 0.04 0.00 73.07 01:10:01 AM all 27.51 0.01 1.16 0.14 0.00 71.18 01:20:01 AM all 1.80 0.07 1.06 0.08 0.00 96.99 01:30:01 AM all 26.19 0.01 0.78 0.05 0.00 72.96 01:40:01 AM all 26.62 0.02 0.87 0.05 0.00 72.45 01:50:02 AM all 1.35 0.01 0.87 0.02 0.00 97.75 02:00:01 AM all 26.11 0.02 0.69 0.02 0.00 73.17 02:10:01 AM all 26.73 0.02 0.89 0.14 0.00 72.21 02:20:01 AM all 1.45 0.01 0.92 0.04 0.00 97.58 02:30:01 AM all 26.59 0.01 1.06 0.03 0.00 72.31 02:40:01 AM all 26.27 0.01 0.72 0.05 0.00 72.95 02:50:01 AM all 0.86 0.01 0.50 0.09 0.00 98.53 03:00:01 AM all 25.61 0.02 0.39 0.03 0.00 73.96 03:10:01 AM all 26.30 0.08 0.66 0.14 0.00 72.82 03:20:01 AM all 0.81 0.01 0.51 0.04 0.00 98.63 03:30:02 AM all 26.15 0.02 0.53 0.07 0.00 73.24 03:40:01 AM all 26.06 0.01 0.47 0.04 0.00 73.42 03:50:01 AM all 0.96 0.02 0.51 0.03 0.00 98.48 Average: all 17.69 0.02 0.79 0.14 0.00 81.36 06:58:14 AM LINUX RESTART 07:00:01 AM CPU %user %nice %system %iowait %steal %idle 07:10:01 AM all 1.04 0.02 0.57 0.95 0.00 97.42 07:20:02 AM all 0.66 0.01 0.39 0.06 0.00 98.87 07:30:01 AM all 25.71 0.01 0.45 0.16 0.00 73.67 07:40:01 AM all 25.88 0.01 0.35 0.08 0.00 73.68 07:50:01 AM all 1.13 0.02 0.55 0.11 0.00 98.19 As you can see the server became unresponsive at 03.50 AM and I had to reset the VM at 06.58 AM to bring the website up again. I would appreciate any help/assistance to fix this issue. thank you very much

  Read the article

• Kernel Panic - Not Syncing: Fatal exception

  - by user3513346

  Server (HP Proliant D320e G8 v2) froze at this screen during boot today (running CentOS 6.5): I was able to get the server to boot after a 'press and hold'. I've been having many problems with the server lately - mainly related to the iLO and being unable to install CentOS 7. Could someone please help me decode this screen? Does it suggest there could be a serious problem? Or does this just happen sometimes? It is possible that the OS wasn't 'shutdown' properly before the failed boot.

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• What is a kernel panic?

  - by RCIX

  I know that this sounds like a LMGTFY question but i thought i'd ask it so that google actually turns up (more) good results. What is it?

  Read the article

• Panic Transmit file upload

  - by 1ndivisible

  I've ditched Coda and bought Transmit. I'm a little confused by the file uploading. I have exactly the same folder structure remotely and locally, but if I right-click a file and choose Upload "SomeFileName.html" The file is always uploaded into the root of the remote site, even if the file is in a folder. If I choose to upload a file at assets/images/some_image.png I would expect it to be uploaded to the same folder on the remote server, not the root. Coda dealt with this perfectly and also told me what files had been modified and needed uploading. Transmit doesn't seem to do either of these things. So my questions are: How can I upload a file to the same path on the remote server without having to drag and drop Is there any way to have Transmit mark edited files or upload only edited files. [There is no tag for Transmit so if someone with more rep could make and add one that would be grand]

  Read the article

• How to workaround or diagnose a kernel panic when "safely removing" external hdd?

  - by Shawn

  I'm experiencing an issue when using the "Safely Remove" option to remove my 1TB external HDD from the Unity Launcher. Not every time, but occasionally my screen will go black and display LARGE amounts of text information (which I obviously cannot screen cap). The jist of the info displayed is that unmounting or 'safely removing' the drive causes a kernel panic. Is there a Command Line command to remove mounted drives, or at least one that would show me some sort of error output when the drive is removed? I'm trying to narrow down the cause. I could be imagining this, but it seems to happen most often when I have other programs running when I remove the drive (i.e. Firefox, Transmission). Please note that my external drive is not in use when I attempt to remove it and it is not being used either by Firefox or Transmission at these times. Any help would be appreciated.

  Read the article

• Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block 0,0

  - by AlbertK

  I've read the following two solution: Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) kernel panic not syncing vfs unable to mount root fs on unknown block oo swapper not tainted ,but still got the same problem. Here's my full error code: [1.902269] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [1.902299] Pid: 1, comm: swapper/0 Not tainted 3.2.0-29-generic #46-Ubuntu [1.902325] Call Trace: [1.902348] [<ffffffff81640ec8>] panic+0x91/0x1a4 [1.902373] [<ffffffff81cfc01e>] mount_block_root+0xdc/0x18e [1.902400] [<ffffffff81002930>] ? populate_rootfs_wait+0x300/0x9d0 [1.902426] [<ffffffff81cfc257>] mount_root+0x54/0x59 [1.902450] [<ffffffff81cfc3c9>] prepare_namespace+0x16d/0x1a6 [1.902476] [<ffffffff81cfbd63>] kernel_init+0x153/0x158 [1.902501] [<ffffffff81664034>] kernel_thread_helper+0x4/0x10 [1.902527] [<ffffffff81cfbc10>] ? start_kernel+0x3bd/0x3bd [1.902551] [<ffffffff81664030>] ? gs_change+0x13/0x13 I don't know what these error messages mean at all, but I hope that these will help to solve this problem I'm running Ubuntu 12.04. Thanks for any advice.

  Read the article

• Kernel Panic Troubleshooting For Dummies

  - by iamsid

  I have made Ubuntu my primary OS since 10.04, and I have converted many of my friends and neighbors into Ubuntu users since then. I am the fix-it guy they approach when they encounter problems. The most frantic calls I get are when they encounter an "update-induced kernel panic." (Many human beings are allergic to command-line interfaces and search engines.) What are the step-by-step procedures to resolve an "update-induced kernel panic"?

  Read the article

• Error:couldn't read file-Kernel panic

  - by Thanos

  I have just installed ubuntu 12.04.1. To be honest I had to run installation several times until it was finished fine. When I finally managed to install it properly, I power on the laptop and the grub shoed up! I selected ubuntu generic. It takes some time to load and when it does I get an error message stating that error: couldn't read file Press any key to continue If I press any button nothing happens. If a leave it there, in a short while there is a black screen loading which gives some weird messages [0.946710] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (0,0) [0.946755] Pid: 1, comm: swapper/0 Not tainted 3.2.0-29-generic #46-Ubuntu [0.946792] Call Trace: [0.946831] [<ffffffff81640ec8>] panic+0x91/0x1a4 [0.946869] [<ffffffff81cfc01e>] mount_block_root+0xdc/0x18e [0.946909] [<ffffffff81002930>] ? populate_rootfs_wait+0x300/0x9d0 [0.946947] [<ffffffff81cfc257>] mount_root+0x54/0x59 [0.946982] [<ffffffff81cfcec9>] prepare_namespace+0x16d/0x1a6 [0.947019] [<ffffffff81cfbd63>] kernel_init+0x153/0x158 [0.947094] [<ffffffff81cfbc10>] ? start_kernel+0x3bd/0x3bd [0.947129] [<ffffffff81664030>] ? gs_change+0x13/0x13 The thing is that the laptop isn't mine. A friend tried to dual boot ubuntu alongside windows 7 but he didn't succeed. Ubuntu option was in grub, but when you tried to boot it rebooted from the start. So from a Live CD I erased ubuntu, started windows to check if something went wrong, and fortunately everything was OK. Windows started normally! So I tried to install ubuntu. Before installation was completed the installer crashed! I was afraid that he would lost windows, something that was true... At that point I tried to install windows but whichever distro(XP, 7{home, proffessional, ultimate},8) I tried it could never reach the end. So I tried to reinstall ubuntu but I was facing those weird messages. What can I do to move on? ______________________________________________________________________ EDIT1: I tried to check and fix(if possible) with GParted it took a lot of hours,although gparted displays only 01:14, I restarted the system and now I get not exactly the same messages. Numbers in braces [ ] are different [0.818189] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (0,0) [0.818235] Pid: 1, comm: swapper/0 Not tainted 3.2.0-29-generic #46-Ubuntu [0.818272] Call Trace: [0.818312] [<ffffffff81640ec8>] panic+0x91/0x1a4 [0.818351] [<ffffffff81cfc01e>] mount_block_root+0xdc/0x18e [0.818391] [<ffffffff81002930>] ? populate_rootfs_wait+0x300/0x9d0 [0.818428] [<ffffffff81cfc257>] mount_root+0x54/0x59 [0.818464] [<ffffffff81cfcec9>] prepare_namespace+0x16d/0x1a6 [0.818501] [<ffffffff81cfbd63>] kernel_init+0x153/0x158 [0.818574] [<ffffffff81cfbc10>] ? start_kernel+0x3bd/0x3bd [0.818610] [<ffffffff81664030>] ? gs_change+0x13/0x13 What on earth is going on? ______________________________________________________________________ EDIT2: I forgot to mention that my friend gave a punch to his laptop during a game. After that his cooler became to make a weird noise so I checked and it is a bit tortuous but it is working. What I beleive must be wrong is that his HDD makes a weird noise while trying to load ubuntu, which means he might need a new HDD. Could that be true?

  Read the article

• Kernel Panic Fatal Machine Check

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-(

  Read the article

• kernel panic - diagnosis?

  - by user94188

  I'm having a kernel panic problem - my machine will run for hours, maybe all day and then have a panic attack. I have no idea how to interpret the output, but here's a picture of what's left on the screen when it happens: https://dl.dropbox.com/u/13279067/photo.JPG (I can't post images yet) I've looked through the logs but didn't find anything obvious - I'm still learning though so I've probably missed something. It's a little harder since it's always happened when I've been out or at night so I can't pinpoint the exact time it crashed. Anyone have advice? thanks

  Read the article

• 12.04 kernel panic

  - by jesus

  Hello I'm having trouble with Ubuntu 12.04. I downloaded the ISO and burned it into a CD and tried to install Ubuntu, but during the installation process, I got this message Kernel panic-not syncing Attempted to kill init! pid:1,comm:init not tainted 3.2.0-23-generic-pae#36-ubunru then it says switching to console text, and it just hangs in there and nothing happens. I burned another CD with Ubuntu 10.04, but I get a different problem: Ubuntu just gets stuck at the splash screen with the 5 dots which move from red to white, and nothing happens. I was able to boot before with 10.04 but I recently upgraded my computer graphics card and power supply. please see my system specs. Gigabyte GA-M68M-S2P (rev. 2.3) GeForce 7025 Chipset Athalon II x4 640 QuadCore Radeon HD 6870 sapphire OCZ ModXStream Pro 600W Modular High Performance Power Supply 3 hard drives one is IDE and the other two SATA IDE DVD Drive If any one could help me, I'd be most appreciative. If it helps I tried the F6 option like acpi=off noapic nolapic nomodset but i still get kernel panic

  Read the article

• Kernel panic on reboot after failed logical volume resize

  - by Derek

  I attempted to do a logical volume resize yesterday using the follwoing commands $sudo pvdisplay "/dev/sda8" is a new physical volume of "113.11 GiB" --- NEW Physical volume --- PV Name /dev/sda8 VG Name PV Size 113.11 GiB Allocatable NO PE Size 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID jwyO1o-b2ap-CW51-kx7O-kf26-arim-SM8V6m $sudo vgextend vg /dev/sda8 sudo vgdisplay vg --- Volume group --- VG Name vg System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 9 VG Access read/write VG Status resizable MAX LV 0 Cur LV 5 Open LV 5 Max PV 0 Cur PV 2 Act PV 2 VG Size 131.74 GiB PE Size 4.00 MiB Total PE 33725 Alloc PE / Size 4769 / 18.63 GiB Free PE / Size 28956 / 113.11 GiB VG UUID AhusW2-pzFv-3W32-mpv2-s5VG-FN7S-kVSadx $sudo lvresize -L +20GB /dev/mapper/vg-var So as you can see, it looks like adding the physical volume to the vg worked, because i see free space available there. When I typed the lvresize command, it never returned. I let this run overnight in the background, but this morning I still couldnt successfully do a "pvdisplay" or "lvdisplay" because I think it was waiting on a lock or something, so the command never returned. When i went to log onto the server's console, I saw a bunch of messages like: rcu_sched_state detected stall on cpu 2 Now when I boot, I get a kernel panic error, and a message about not being able to mount /mapper/vg-root cannot open root device "mapper/vg-root" or unknown_block(0,0) Kernel Panic -not syncing: VFS: Unable to mount root file system on unknown_block(0,0) What should I do to get my system back up and running? Did I attempt to do the logical volume resize correctly? Thanks

  Read the article

• Kernel panic - not syncing: Attempted to kill init!-grub rescue

  - by Nimish

  I have windows8 and ubuntu 13.10 installed on my laptop in dual-boot mode.While updating the disk management system my pc got hanged and on restarting it have grub rescue mode prompting on the screen.I tried ls (hd0,msdos_) all the commands but it shows 'unknown file system".i tried booting with ubuntu,boot-repair,superboot live cd but it shows "Kernel panic - not syncing: Attempted to kill init!" and hangs on the screen with two blinking lights.please suggest some help as soon as possible thanks in advance

  Read the article

• Motherboard and Processor sync error panic and killing init

  - by pradeep

  I have installed Ubuntu 12.04LTS for the first time and this has problems while working. the system hangs out and panic error showing the message that motherboard and processor not syncing and attempted to kill init. I have a Gigabyte GA-MA74GMT-S2(AM3) board AMD Phenom II X2 555 processor 4gb ddr3 ram with L6 cache I would like to know why is this problem happening. this is a separate installation and system is also having windows7 running as a separate installation. need help fixing this.

  Read the article

• How do I install lubuntu? (kernel panic)

  - by melvincv

  Please help me install Lubuntu 12.04 i386 on an old computer. I select the "Try Lubuntu without installing" and it crashes with a kernel panic. Rarely I do get to the live OS, but soon the display goes blank. The messages log gives me '[drm] ERROR GPU hung/wedged' The specs are: Pentium 4 2.4GHz 1GB DDR RAM 40GB PATA HDD Intel 845GL chipset (8MB framebuffer, 64MB shared system memory set in the BIOS)

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >