Search Results

Search found 16 results on 1 pages for 'piet binnenbocht'.

Page 1/1 | 1 

  • How do DP and CC change in Piet?

    - by Paul Butcher
    According to the specification, Black colour blocks and the edges of the program restrict program flow. If the Piet interpreter attempts to move into a black block or off an edge, it is stopped and the CC is toggled. The interpreter then attempts to move from its current block again. If it fails a second time, the DP is moved clockwise one step. These attempts are repeated, with the CC and DP being changed between alternate attempts. If after eight attempts the interpreter cannot leave its current colour block, there is no way out and the program terminates. Unless I'm reading it incorrectly, this is at odds with the behaviour of the Fibonacci sequence example here: http://www.dangermouse.net/esoteric/piet/fibbig1.gif (from: http://www.dangermouse.net/esoteric/piet/samples.html) Specifically, why does the DP turn left at (0,3) ((0,0) being (top, left)) when it hits the left edge? At this point, both DP and CC are LEFT, so, by my reading, the sequence should then be: Attempt (and fail) to leave the block by going off the edge at (0,4), Toggle CC to RIGHT, Attempt (and fail) to leave the block by going off the edge at (0,2). Rotate DP to UP, Attempt (and succeed) to leave the block at (1,2) by entering the white block at (1,1) The behaviour indicated by the trace seems to be that DP gets rotated all the way, leaving CC at LEFT. What have I misunderstood?

    Read the article

  • Performance problem with an Intel Wireless 5100

    - by Piet
    I just installed 12.04 on a HP Elitebook 2530p. The performance with wireless connection to an Eminem 4551 is very bad. Wired connection just works great. If I connect to my router (Eminent 4551) wired I have a good performance accessing internet pages with Firefox. When I try to access the same internet pages wireless I get a real bad performance. piet@piet-HP-EliteBook-2530p:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) 00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 44:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 44:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) piet@piet-HP-EliteBook-2530p:~$

    Read the article

  • ORACLE UNIVERSITY

    - by mseika
    Expert Seminar in Dubai: How to choose your High-Availability solutions with Piet de Visser Oracle University's Expert Seminars are delivered by the best Oracle Gurus in the industry from all over the world. These unique and informative seminars are designed to provide you with expert insight in your area of interest. Piet de Visser is delivering the Expert Seminar ‘How to choose your High-Availability solutions’ on 8 November October in Dubai. You can find more information here. Please note: Your OPN discount is applied to the standard price shown on the website. For assistance with bookings contact Oracle University: eMail: [email protected] Telephone: +971 4 39 09 050

    Read the article

  • Generating a twitter OAuth access key - the semi-manual way

    - by Piet
    [UPDATE] Apparently someone at Twitter was listening, or I’m going senile/blind. Let’s call it a combination of both. Instead of following all the steps below, you could just login with the Twitter account you want to use on http://dev.twitter.com, register your application and then click ‘Edit Details’ on the application overview page at http://dev.twitter.com/apps. Next click the ‘Application detail’ button on the right, followed by the ‘My Access Token’ button in order to get your Access Token and Access Token Secret. This makes the old post below rather obsolete. Clearly a case of me thinking everything is a nail and ruby is a hammer (don’t they usually say this about java coders?) [ORIGINAL POST] OAuth is great! OAuth allows your application to use your user’s data without the need to ask for their password. So Twitter made the API much safer for their and your users. Hurray! Free pizza for everyone! Unless of course you’re using the Twitter API for your own needs like running your own bot and don’t need access to other user’s data. In such cases a simple username/password combination is more than enough. I can understand however that the Twitter guys don’t really care that much about these exceptions(?). Most such uses for the API are probably rather spammy in nature. !!! If you have a twitter app that uses the API to access external user’s data: look for another solution. This solution is ONLY meant when you ONLY need access to your own account(s) through the API. Other Solutions Mr Dallas Devries posted a solution here which involves requesting and scraping a one-time PIN. But: I like to minimize the amount of calls I make to twitter’s API or pages to lessen my chances of meeting the fail whale. Also, as soon as the pin isn’t included in a div called ‘oauth_pin’ anymore, this will fail. However, mr Devries’ post was a starting point for my solution, so I’m much obliged to him posting his findings. Authenticating with the Twitter API: old vs new Acessing The Twitter API the old way: require ‘twitter’ httpauth = Twitter::HTTPAuth.new('my_account','my_secret_password') client = Twitter::Base.new(httpauth) client.update(‘Hurray!’) The OAuth way: require 'twitter' oauth = Twitter::OAuth.new('ve4whatafuzzksaMQKjoI', 'KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY') oauth.authorize_from_access('123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis', 'fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh') client = Twitter::Base.new(oauth) client.update(‘Hurray!’) In the above case, ve4whatafuzzksaMQKjoI is the ‘consumer key’ (sometimes also referred to as ‘consumer token’) and KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY is the ‘consumer secret’. You’ll get these from Twitter when you register your app. 123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis is the ‘access token’ and fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh is the ‘access secret’. This combination gives the registered application access to your account. I’ll show you how to obtain these by following the steps below. (Basically you’ll need a bunch of keys and you’ll have to jump a bit through hoops to obtain them for your server/bot. ) How to get these keys 1. Surf to the twitter apps registration page go to http://dev.twitter.com/apps to register your app. Login with your twitter account. 2. Register your application Enter something for Application name, Description, website,… as I said: they make you jump through hoops. If you plan on using the API to post tweets, Your application name and website will be used in the ‘5 minutes ago via…’ line below your tweet. You could use the this to point to a page with info about your bot, or maybe it’s useful for SEO purposes. For application type I choose ‘browser’ and entered http://www.hadermann.be/callback as a ‘Callback URL’. This url returns a 404 error, which is ideal because after giving our account access to our ‘application’ (step 6), it will redirect to this url with an ‘oauth_token’ and ‘oauth_verifier’ in the url. We need to get these from the url. It doesn’t really matter what you enter here though, you could leave it blank because you need to explicitely specify it when generating a request token. You probably want read&write access so set this at ‘Default Access type’. 3. Get your consumer key and consumer secret On the next page, copy/paste your ‘consumer key’ and ‘consumer secret’. You’ll need these later on. You also need these as part of the authentication in your script later on: oauth = Twitter::OAuth.new([consumer key], [consumer secret]) 4. Obtain your request token run the following in IRB to obtain your ‘request token’ Replace my fake consumer key and consumer secret with the one you obtained in step 3. And use something else instead http://www.hadermann.be/callback: although this will only give a 404, you shouldn’t trust me. irb(main):001:0> require 'oauth' irb(main):002:0> c = OAuth::Consumer.new('ve4whatafuzzksaMQKjoI', 'KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY', {:site => 'http://twitter.com'}) irb(main):003:0> request_token = c.get_request_token(:oauth_callback => 'http://www.hadermann.be/callback') irb(main):004:0> request_token.token => "UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1" This (UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1) is the request token: Copy/paste this token, you will need this next. 5. Authorize your application surf to https://api.twitter.com/oauth/authorize?oauth_token=[the above token], for example: https://api.twitter.com/oauth/authorize?oauth_token=UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1 This will bring you to the ‘An application would like to connect to your account’- screen on Twitter where you can grant access to the app you just registered. If you aren’t still logged in, you need to login first. Click ‘Allow’. Unless you don’t trust yourself. 6. Get your oauth_verifier from the redirected url Your browser will be redirected to your callback url, with an oauth_token and oauth_verifier parameter appended. You’ll need the oauth_verifier. In my case the browser redirected to: http://www.hadermann.be/callback?oauth_token=UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1&oauth_verifier=waoOhKo8orpaqvQe6rVi5fti4ejr8hPeZrTewyeag Which returned a 404, giving me the chance to copy/paste my oauth_verifier: waoOhKo8orpaqvQe6rVi5fti4ejr8hPeZrTewyeag 7. Request an access token Back to irb, use the oauth_verifier to request an access token, as follows: irb(main):005:0> at = request_token.get_access_token(:oauth_verifier => 'waoOhKo8orpaqvQe6rVi5fti4ejr8hPeZrTewyeag') irb(main):006:0> at.params[:oauth_token] => "123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis" irb(main):007:0> at.params[:oauth_token_secret] => "fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh" We’re there! 123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis is the access token. fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh is the access secret. Try it! Try the following to post an update: require 'twitter' oauth = Twitter::OAuth.new('ve4whatafuzzksaMQKjoI', 'KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY') oauth.authorize_from_access('123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis', 'fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh') client = Twitter::Base.new(oauth) client.update(‘Cowabunga!’) Now you can go to your twitter page and delete the tweet if you want to.

    Read the article

  • Twitter gem - undefined method `stringify_keys’

    - by Piet
    Have you been getting the following errors when running the Twitter gem lately ? /usr/local/lib/ruby/gems/1.8/gems/httparty-0.4.3/lib/httparty/response.rb:15:in `send': undefined method `stringify_keys' for # (NoMethodError) from /usr/local/lib/ruby/gems/1.8/gems/httparty-0.4.3/lib/httparty/response.rb:15:in `method_missing’ from /usr/local/lib/ruby/gems/1.8/gems/mash-0.0.3/lib/mash.rb:131:in `deep_update’ from /usr/local/lib/ruby/gems/1.8/gems/mash-0.0.3/lib/mash.rb:50:in `initialize’ from /usr/local/lib/ruby/gems/1.8/gems/twitter-0.6.13/lib/twitter/search.rb:101:in `new’ from /usr/local/lib/ruby/gems/1.8/gems/twitter-0.6.13/lib/twitter/search.rb:101:in `fetch’ from test.rb:26 It’s because Twitter has been sending back plain text errors that are treated as a string instead of json and can’t be properly ‘Mashed’ by the Twitter gem. Also check http://github.com/jnunemaker/twitter/issues#issue/6. Without diving into the bowels of the Twitter gem or HTTParty, you could ‘begin…rescue’ this error and try again in 5 minutes. I fixed it by overriding the offending code to return nil and checking for a nil response as follows: module Twitter class Search def fetch(force=false) if @fetch.nil? || force query = @query.dup query[:q] = query[:q].join(' ') query[:format] = 'json' #This line is the hack and whole reason we're monkey-patching at all. response = self.class.get('http://search.twitter.com/search', :query => query, :format => :json) #Our patch: response should be a Hash. If it isnt, return nil. return nil if response.class != Hash @fetch = Mash.new(response) end @fetch end end end (adapted from http://github.com/jnunemaker/twitter/issues#issue/9) If you have a better solution: speak up!

    Read the article

  • Twitter traffic might not be what it seems

    - by Piet
    Are you using bit.ly stats to measure interest in the links you post on twitter? I’ve been hearing for a while about people claiming to get the majority of their traffic originating from twitter these days. Now, I’ve been playing with the twitter ruby gem recently, doing various experiments which I’ll not go into detail here because they could be regarded as spamming… if I’d conduct them on a large scale, that is. It’s scary to see people actually engaging with @replies crafted with some regular expressions and eliza-like trickery on status updates found using the twitter api. I’m wondering how Twitter is going to contain the coming spam-flood. When posting links I used bit.ly as url shortener, since this one seems to be the de-facto standard on twitter. A nice thing about bit.ly is that it shows some basic stats about the redirects it performs for your shortened links. To my surprise, most links posted almost immediately resulted in several visitors. Now, seeing that I was posting the links together with some information concerning what the link is about, I concluded that the people who were actually clicking the links should be very targeted visitors. This felt a bit like free adwords, and I suddenly started to understand why everyone was raving about getting traffic from twitter. How wrong I was! (and I think several 1000 online marketers with me) On the destination site I used a traffic logging solution that works by including a little javascript snippet in your pages. It seemed that somehow all visitors disappeared after the bit.ly redirect and before getting to the site, because I was hardly seeing any visitors there. So I started investigating what was happening: by looking at the logfiles of the destination site, and by making my own ’shortened’ urls by doing redirects using a very short domain name I own. This way, I could check the apache access_log before the redirects. Most user agents turned out to be bots without a doubt. Here’s an excerpt of user-agents awk’ed from apache’s access_log for a time period of about one hour, right after posting some links: AideRSS 2.0 (postrank.com) Java/1.6.0_13 Java/1.6.0_14 libwww-perl/5.816 MLBot (www.metadatalabs.com/mlbot) Mozilla/4.0 (compatible;MSIE 5.01; Windows -NT 5.0 - real-url.org) Mozilla/5.0 (compatible; Twitturls; +http://twitturls.com) Mozilla/5.0 (compatible; Viralheat Bot/1.0; +http://www.viralheat.com/) Mozilla/5.0 (Danger hiptop 4.6; U; rv:1.7.12) Gecko/20050920 Mozilla/5.0 (X11; U; Linux i686; en-us; rv:1.9.0.2) Gecko/2008092313 Ubuntu/9.04 (jaunty) Firefox/3.5 OpenCalaisSemanticProxy PycURL/7.18.2 PycURL/7.19.3 Python-urllib/1.17 Twingly Recon twitmatic Twitturly / v0.6 Wget/1.10.2 (Red Hat modified) Wget/1.11.1 (Red Hat modified) Of the few user-agents that seem ‘real’ at first, half are originating from an ip-address used by Amazon EC2. And I doubt people are setting op proxies on there. Oh yeah, Googlebot (the real deal, from a legit google owned address) is sucking up posted links like fresh oysters. I guess google is trying to make sure in advance to never be beaten by twitter in the ‘realtime search’ department. Actually, I think it’d be almost stupid NOT to post any new pages/posts/websites on Twitter, it must be one of the fastest ways to get a Googlebot visit. Same experiment with a real, established twitter account Now, because I was posting the url’s either as ’status’ messages or directed @people, on a test-account with hardly any (human) followers, I checked again using the twitter accounts from a commercial site I’m involved with. These accounts all have between 500 and 1000 targeted (I think) followers. I checked the destination access_logs and also added ‘my’ redirect after the bit.ly redirect: same results, although seemingly a bit higher real visitor/bot ratio. Btw: one of these account was ‘punished’ with a 1 week lock recently because the same (1 one!) status update was sent that was sent right before using another account. They got an email explaining the lock because the account didn’t act according to their TOS. I can’t find anything in their TOS about it, can you? I don’t think Twitter is on the right track punishing a legit account, knowing the trickery I had been doing with it’s api went totally unpunished. I might be wrong though, I often am. On the other hand: this commercial site reported targeted traffic and actual signups from visitors coming from Twitter. The ones that are really real visitors are also very targeted. I’m just not sure if the amount of work involved could hold up against an adwords campaign. Reposting the same link over and over again helps On thing I noticed: It helps to keep on reposting the same links with regular intervals. I guess most people only look at their first page when checking out recent posts of the ones they’re following, or don’t look too far back when performing a search. Now, this probably isn’t according to the twitter TOS. Actually, it might be spamming but no-one is obligated to follow anyone else of course. This way, I was getting more real visitors and less bots. To my surprise (when my programmer’s hat is on) there were still repeated visits from the same bots coming from the same ip-addresses. Did they expect to find something else when visiting for a 2nd or 3rd time? (actually,this gave me an idea: you can’t change a link once it’s posted, but you can change where it redirects to) Most bots were smart enough not to follow the same link again though. Are you successful in getting real visitors from Twitter? Are you only relying on bit.ly to provide traffic stats?

    Read the article

  • MODx character encoding

    - by Piet
    Ahhh character encodings. Don’t you just love them? Having character issues in MODx? Then probably the MODx manager character encoding, the character encoding of the site itself, your database’s character encoding, or the encoding MODx/php uses to talk to MySQL isn’t correct. The Website Encoding Your MODx site’s character encoding can be configured in the manager under Tools/Configuration/Site/Character encoding. This is the encoding your website’s visitors will get. The Manager’s Encoding The manager’s encoding can be changed by setting $modx_manager_charset at manager/includes/lang/<language>.inc.php like this (for example): $modx_manager_charset = 'iso-8859-1'; To find out what language you’re using (and thus was file you need to change), check Tools/Configuration/Site/Language (1 line above the character encoding setting). This needs to be the same encoding as your site. You can’t have your manager in utf8 and your site in iso-8859-1. Your Database’s Encoding The charset MODx/php uses to talk to your database can be set by changing $database_connection_charset in manager/includes/config.inc.php. This needs to be the same as your database’s charset. Make sure you use the correct corresponding charset, for iso-8859-1 you need to use ‘latin1′. Utf8 is just utf8. Example: $database_connection_charset = 'latin1'; Now, if you check Reports/System info, the ‘Database Charset’ might say something else. This is because the mysql variable ‘character_set_database’ is displayed here, which contains the character set used by the default database and not the one for the current database/connection. However, if you’d change this to display ‘character_set_connection’, it could still say something else because the ’set character set’ statement used by MODx doesn’t change this value either. The ’set names’ statement does, but since it turns out my MODx install works now as expected I’ll just leave it at this before I get a headache. If I saved you a potential headache or you think I’m totally wrong or overlooked something, let me know in the comments. btw: I want to be able to use a real editor with MODx. Somehow.

    Read the article

  • Google Chrome OS

    - by Piet
    It’s about time someone took this initiative: Google Chrome OS I especially like the following: Speed, simplicity and security are the key aspects of Google Chrome OS. We’re designing the OS to be fast and lightweight, to start up and get you onto the web in a few seconds. The user interface is minimal to stay out of your way, and most of the user experience takes place on the web. And as we did for the Google Chrome browser, we are going back to the basics and completely redesigning the underlying security architecture of the OS so that users don’t have to deal with viruses, malware and security updates. It should just work. I recently had the ‘pleasure’ witnessing several 60+ yr old friends and family (all respect for everyone in their 2nd or 3rd youth) buying their first pc, taking their first steps using a pc and the net. Have you ever seen the gazillions of little ‘useful’ tools that are installed on a new standard Vista pc or laptop ? This is like learning to drive a new car and being placed in an airplane cockpit. And all the messages one gets about virus/security checks, fingerprint nog being enrolled, trial period expiring (because half those really useful tools come with a trial period), … If I was in their shoes, being confronted with this as a total newbie, I guess I’d just give up pretty soon. As a matter of fact, I actually gave up on Vista on my work-laptop, it was driving me crazy. Thank god I was allowed to install XP. I’m a Linux user at home, and Vista was such a frustrating experience that Windows XP actually felt like breath of fresh air. And what are those people using? Email, browsing…. and maybe writing a little letter now and then or storing their photo’s if they have a digital camera. Actually (side note), I get the impression that hearing about facebook is a major motivator for the digital newbies to finally take the plunge, buy a pc and get on-line. And OK, we’ve seen initiatives like this before, but Google is a brand everyone knows… unlike Ubuntu, Debain or Mandriva. Google = God. If I was Microsoft I’d be wetting my pants knowing Google was about to release their own OS, without a doubt fully optimized to use their own on-line office suit. On the other hand, the old adage ‘no one ever got fired for choosing Microsoft’ still holds a lot of truth. I hope I’ll be able to give it a big thumbs up if a would-be pc-user asks me what kind of pc/OS they should go for in the near future. On the other hand, if I’d do that, I’m pretty sure a couple of weeks later I’d get a call asking how to install this game or photo editing tool they got from one of their Windows using friends… or that nifty photo-printer they just bought. But then, I also get those questions now from newbie Windows users. It takes a couple of years before Newbie pc users understand that some things just don’t work and aren’t worth the time trying to fix them. I’d just wish they’d go back to the shop when something doesn’t work. You also don’t let you mechanic friend try to fix a problem with your brand new car. But that’s another story… Wait and see…

    Read the article

  • WordPress hack might affect more than your WordPress installation!

    - by Piet
    Just a quick note… If you’re managing WordPress installations, and haven’t heard about the recent WordPress hacks (http://wordpress.org/support/topic/307660) yet you probably just got back from holiday. There’s plenty of advice on fixing a hacked installation if you follow some of the links in the above post, so I’m not going to recite that here. However! While cleaning a WordPress installation that resides in a subdirectory of a modx cms I found that the modx index.php files were also infected. I searched for infected files using grep as follows: grep -R 'function gpc_' * If you’re on a shared hosting environment that doesn’t allow shell access: time to change your hosting provider. (mail me if you need recommendations)

    Read the article

  • What makes them click ?

    - by Piet
    The other day (well, actually some weeks ago while relaxing at the beach in Kos) I read ‘Neuro Web Design - What makes them click?’ by Susan Weinschenk. (http://neurowebbook.com) The book is a fast and easy read (no unnecessary filler) and a good introduction on how your site’s visitors can be steered in the direction you want them to go. The Obvious The book handles some of the more known/proven techniques, like for example that ratings/testimonials of other people can help sell your product or service. Another well known technique it talks about is inducing a sense of scarcity/urgency in the visitor. Only 2 seats left! Buy now and get 33% off! It’s not because these are known techniques that they stop working. Luckily 2/3rd of the book handles less obvious techniques, otherwise it wouldn’t be worth buying. The Not So Obvious A less known influencing technique is reciprocity. And then I’m not talking about swapping links with another website, but the fact that someone is more likely to do something for you after you did something for them first. The book cites some studies (I always love the facts and figures) and gives some actual examples of how to implement this in your site’s design, which is less obvious when you think about it. Want to know more ? Buy the book! Other interesting sources For a more general introduction to the same principles, I’d suggest ‘Yes! 50 Secrets from the Science of Persuasion’. ‘Yes!…’ cites some of the same studies (it seems there’s a rather limited pool of studies covering this subject), but of course doesn’t show how to implement these techniques in your site’s design. I read ‘Yes!…’ last year, making ‘Neuro Web Design’ just a little bit less interesting. !!!Always make sure you’re able to measure your changes. If you haven’t yet, check out the advanced segmentation in Google Analytics (don’t be afraid because it says ‘beta’, it works just fine) and Google Website Optimizer. Worth Buying? Can I recommend it ? Sure, why not. I think it can be useful for anyone who ever had to think about the design or content of a site. You don’t have to be a marketing guy to want a site you’re involved with to be successful. The content/filler ratio is excellent too: you don’t need to wade through dozens of pages to filter out the interesting bits. (unlike ‘The Design of Sites’, which contains too much useless info and because it’s in dead-tree format, you can’t google it) If you like it, you might also check out ‘Yes! 50 Secrets from the Science of Persuasion’. Tip for people living in Europe: check Amazon UK for your book buying needs. Because of the low UK Pound exchange rate, it’s usually considerably cheaper and faster to get a book delivered to your doorstep by Amazon UK compared to having to order it at the local book store or web-shop.

    Read the article

  • The hidden cost of interrupting knowledge workers

    - by Piet
    The November issue of pragpub has an interesting article on interruptions. The article is written by Brian Tarbox, who also mentions the article on his blog. I like the subtitle: ‘Simple Strategies for Avoiding Dumping Your Mental Stack’. Brian talks about the effective cost of interrupting a ‘knowledge worker’, often with trivial questions or distractions. In the eyes of the interruptor, the interruption only costs the time the interrupted had to listen to the question and give an answer. However, depending on what the interrupted was doing at the time, getting fully immersed in their task again might take up to 15-20 minutes. Enough interruptions might even cause a knowledge worker to mentally call it a day. According to this article interruptions can consume about 28% of a knowledge worker’s time, translating in a $588 billion loss for US companies each year. Looking for a new developer to join your team? Ever thought about optimizing your team’s environment and the way they work instead? Making non knowledge workers aware You can’t. Well, I haven’t succeeded yet. And believe me: I’ve tried. When you’ve got a simple way to really increase your productivity (’give me 2 hours of uninterrupted time a day’) it wouldn’t be right not to tell your boss or team-leader about it. The problem is: only productive knowledge workers seem to understand this. People who don’t fall into this category just seem to think you’re joking, being arrogant or anti-social when you tell them the interruptions can really have an impact on your productivity. Also, knowledge workers often work in a very concentrated mental state which is described here as: It is the same mindfulness as ecstatic lovemaking, the merging of two into a fluidly harmonious one. The hallmark of flow is a feeling of spontaneous joy, even rapture, while performing a task. Yes, coding can be addictive and if you’re interrupting a programmer at the wrong moment, you’re effectively bringing down a junkie from his high in just a few seconds. This can result in seemingly arrogant, almost aggressive reactions. How to make people aware of the production-cost they’re inflicting: I’ve been often pondering that question myself. The article suggests that solutions based on that question never seem to work. To be honest: I’ve never even been able to find a half decent solution for this question. People who are not in this situations just don’t understand the issue, no matter how you try to explain it. Fun (?) thing I’ve noticed: Programmers or IT people in general who don’t get this are often the kind of people who just don’t get anything done. Interrupt handling (interruption management?) IRL Have non-urgent questions handled in a non-interruptive way It helps a bit to educate people into using non-interruptive ways to ask questions: “duh, I have no idea, but I’m a bit busy here now could you put it in an email so I don’t forget?”. Eventually, a considerable amount of people will skip interrupting you and just send an email right away. Some stubborn-headed people however will continue to just interrupt you, saying “you’re 10 meters from my desk, why can’t we just talk?”. Just remember to disable your email notifications, it can be hard to resist opening your email client when you know a new email just arrived. Use Do Not Disturb signals When working in a group of programmers, often the unofficial sign you can only be interrupted for something important is to put on headphones. And when the environment is quiet enough, often people aren’t even listening to music. Otherwise music can help to block the indirect distractions (someone else talking on the phone or tapping their feet). You might get a “they’re all just surfing and listening to music”-reaction from outsiders though. Peopleware talks about a team where the no-interruption sign was placing a shawl on the desk. If I remember correctly, I am unable to locate my copy of this really excellent must-read book. If you have all standardized on the same IM tool, maybe that tool has a ‘do not disturb’ setting. Also some phone-systems have a ‘DND’ (do not disturb) setting. Hide Brian offers a number of good suggestions, some obvious like: hide away somewhere they can’t find you. Not sure how long it’ll be till someone thinks you’re just taking a nap somewhere though. Also, this often isn’t possible or your boss might not understand this. And if you really get caught taking a nap, make sure to explain that your were powernapping. Counter-act interruptions Another suggestion he offers is when you’re being interrupted to just hold up your hand, blocking the interruption, and at least giving you time to finish your sentence or your block/line of code. The last suggestion works more as a way to make it obvious to the interruptor that they really are interrupting your work and to offload some of the cost on the interruptor. In practice, this can also helps you cool down a bit so you don’t start saying nasty things to the interruptor. Unfortunately I’ve sometimes been confronted with people who just ignore this signal and keep talking, as if they’re sure that whatever they’ve got to say is really worth listening to and without a doubt more important than anything you might be doing. This behaviour usually leaves me speechless (not good when someone just asked a question). I’ve noticed that these people are usually also the first to complain when being interrupted themselves. They’re generally not very liked as colleagues, so try not to imitate their behaviour. TDD as a way to minimize recovery time I don’t like Test Driven Development. Mainly for only one reason: It interrupts flow. At least, that’s what it does for me, but maybe I’m just not grown used to TDD yet. BUT a positive effect TDD has on me when I have to work in an interruptive environment and can’t really get into the ‘flow’ (also supposedly called ‘the zone’ by software developers, although I’ve never heard it 1st hand), TDD helps me to concentrate on the tasks at hand and helps me to get back at work after an interruption. I feel when using TDD, I can get by without the need for being totally ‘in’ the project and I can be reasonably productive without obtaining ‘flow’. Do you have a suggestion on how to make people aware of the concept of ‘flow’ and the cost of interruptions? (without looking like an arrogant ass or a weirdo)

    Read the article

  • SWFObject and IE6 causing hair-pulling agony

    - by Piet
    I recently used SWFObject to display a flash header on a website. I chose SWFObject because: Instead of displaying an annoying ‘Install flash now’ message, it claims to be able to show alternate content. In this case: the original header image. It claims to be compatible with more or less every browser out there. Implementation went fine, until someone tested it on IE6 and got the following error: Internet explorer cannot open the Internet site http://www….. Operation aborted Which basically means that the site just can’t be visited with IE6 (still used a lot in business environments), it even seems as if there’s something wrong with your internet connection. Now, since about 10% of visitors to this site are still using IE6 (why does everyone still use Internet Explorer ???? Do YOU know that these days most people do NOT use Internet Explorer anymore ?) Now after some googling, I found the suggestion to defer loading of the SWFObject.js as follows: <script type="text/javascript" defer=”defer” src=”http://ajax.googleapis.com/ajax/libs/swfobject/2.2/swfobject.js” </script> <script type=”text/javascript” defer=”defer” swfobject.registerObject(”myId”, “9″, “”); </script> What this does according to W3C: When set, this boolean attribute provides a hint to the user agent that the script is not going to generate any document content (e.g., no “document.write” in javascript) and thus, the user agent can continue parsing and rendering. I don’t know exactly why, but: HURRAY! It works now!!! Only… IE6 and IE7 (didn’t try IE8) now gave the following error: Line: 19 Char: 1 Error: ’swfobject’ is undefined Code: 0 URL: http://www… But the flash was still running fine. Still, such an error isn’t clean, especially since almost half of the site’s visitors are using one of these Internet Explorer versions. Now, wanting a quick fix I decided to do the following: <script type="text/javascript" defer="defer" if (typeof(swfobject) != "undefined") swfobject.registerObject("myId", "9", ""); </script> I admit this is a bit of a weird ‘fix’. You’d suspect the flash to stop working on IE6/IE7, which it doesn’t. Not planning on diving into it’s inner bowels, I regard this a ‘mission accomplished’ until someone somewhere posts a better solution (for which I setup some Google alerts). Do you have a better solution? What would be the impact on the webdev economy (or your life) if all browsers were compatible? Addendum Because the above turned out not to work with the new Firefox 3.5.3 (strangely, was OK with 3.5.2 when I tested it) I decided to cut the crap and use the ‘Dynamic Publishing’ way. Ok, so it won’t work for people who have javascript disabled, but who on earth would have flash installed AND javascript disabled? To avoid the IE6 error with the ‘Dynamic Publishing’ way, I call swfobject.embedSWF right after the div that will be replaced with the flash content. Calling swfobject.embedSWF in the <head> would otherwise give me the above error in IE6 again.

    Read the article

  • Proper Regex to find and replace escaped UTF-8 strings

    - by Piet Binnenbocht
    (edited) I am reading a JSON file that includes some UTF-8 characters that are encoded like this: "\uf36b". I am trying to write a RegExp to convert this to an HTML entity that looks like "&#x1F36B;". This displays the character correctly in my html page. I haven't been able to correctly display the character that should be associated with "\uf36b", especially when in a longer sentence that also includes other text. How can I write a regexp that replaces strings like "\uf4d6" and "\uf36b" but leaves other text alone? Example: var str = "I need \uf36b #chocolate"; This should be converted to: I need &#x1F36B; #chocolate;

    Read the article

  • PHP How to create real hex values from a string

    - by Piet
    Hi, I have a string with hexvalues that I use with sha1() echo sha1("\x23\x9A\xB9\xCB\x28\x2D\xAF\x66\x23\x1D\xC5\xA4\xDF\x6B\xFB\xAE\x00\x00\x00\x01"); ab94fcedf2664edfb9b291f85d7f77f27f2f4a9d now I have another string with the same value only not hex. $string2=strtoupper("239ab9cb282daf66231dc5a4df6bfbae00000001"); I want to convert this string so that it is read as above and that the sha1-value is the same as above. echo sha1(do_something($string2)); ab94fcedf2664edfb9b291f85d7f77f27f2f4a9d Does anybody know how to convert a string to real hexvalues? I've tried with pack, sprinft, hexdec, but nothing worked (couldn't find typecasting in hex) Thanks

    Read the article

  • mod,prime -> inverse possible

    - by Piet
    Hi all. I was wondering if one can do the following: We have: X is a product of N-primes, thus I assume unique. C is a constant. We can assure that C is a number that is part of the N-primes or not. Whichever will work best. Thus: X mod C = Z We have Z and C and we know that X was a product of N-primes, where N is restricted lets say first 100 primes. Is there anyway we can get back X?

    Read the article

  • HAML on Rails 3 doesn`t work

    - by Peter
    Hey there, i have tried to render some files with HAML in Rails 3. But HAMl doesn`t work. My testfiles have the extension .html.haml. In the GEMFile i have written gem 'haml' and executed the bundle install When i call my testapp i become an error like this: Template is missing Missing template posts/index with {:locale=>[:en, :en], :formats=>[:html], :handlers=>[:rjs, :rhtml, :rxml, :builder, :erb]} in view paths "/Users/piet/Sites/blog/app/views" Hope, i become some help here. Peter

    Read the article

1