Search Results

Search found 48 results on 2 pages for 'pratik thakkar'.

Page 1/2 | 1 2  | Next Page >

• How to install Oracle Weblogic Server using OS-specific Package installer?(Linux/Solaris)

  - by PratikS -- Oracle

  Note: OS-specific Package installer As the name suggests the installer is platform specific. It is meant for installation with a 32bit JVM only. Both SUN and JROCKIT 32 bit JDKs come bundled with "OS-specific Package installer", so no need to install the JDK in advance. There are three different ways of installing Oracle Weblogic Server: Graphical mode Console mode Silent mode For Linux/Solaris: Steps to install OS-specific Package .bin installer(for Linux/Solaris) are almost same as windows except for the way we launch the installation.Installer: wls_<version>_<linux/solaris>32.bin (E.g. wls1036_linux32.bin/wls1036_solaris32.bin) 1) Graphical mode: Log in to the target UNIX system. Go to the directory that contains the installation program.(Make sure GUI is enabled or else it will default to console mode) Launch the installation by entering the following commands: [weblogic@pratik ~]$ pwd/home/oracle[weblogic@pratik ~]$ cd WLSInstallers/[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rw-rw-r-- 1 oracle oracle 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rwxrwxr-x 1 oracle oracle 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin As soon as you run ./wls1036_linux32.bin with GUI enabled you would see the following screen: Rest of the screens and steps are similar to that of Graphical mode installation on windows, refer: How to install Oracle Weblogic Server using OS-specific Package installer?(Windows) 2) Console mode: Log in to the target UNIX system. Go to the directory that contains the installation program. Launch the installation by entering the following commands: [weblogic@pratik ~]$ pwd/home/oracle[weblogic@pratik ~]$ cd WLSInstallers/[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rw-rw-r-- 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rwxrwxr-x 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin [weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin -mode=consoleExtracting 0%....................................................................................................100%<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Welcome:--------This installer will guide you through the installation of WebLogic 10.3.6.0.Type "Next" or enter to proceed to the next prompt.  If you want to change data entered previously, type "Previous".  You may quit the installer at any time by typing "Exit".Enter [Exit][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:--------------------------------- ->1|* Create a new Middleware Home   2|/home/oracle/wls_12cEnter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [Enter new value or use default"/home/oracle/Oracle/Middleware"]Enter new Middleware Home OR [Exit][Previous][Next]> /home/oracle/WLS1036<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [/home/oracle/WLS1036]Use above value or select another option:    1 - Enter new Middleware Home    2 - Change to default [/home/oracle/Oracle/Middleware]Enter option number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[Yes]Enter index number to select OR [Exit][Previous][Next]> 3<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]Enter [Yes][No]? No<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]    ** Do you wish to bypass initiation of the configuration manager and    **  remain uninformed of critical security issues in your configuration?Enter [Yes][No]? Yes<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Install Type:--------------------Select the type of installation you wish to perform. ->1|Typical    |  Install the following product(s) and component(s):    | - WebLogic Server    | - Oracle Coherence   2|Custom    |  Choose software products and components to install and perform optional    |configuration.Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Product Installation Directories:----------------------------------------Middleware Home Directory: [/home/oracle/WLS1036]Product Installation Directories:   1|WebLogic Server: [/home/oracle/WLS1036/wlserver_10.3]   2|Oracle Coherence: [/home/oracle/WLS1036/coherence_3.7]Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->The following Products and JDKs will be installed:--------------------------------------------------    WebLogic Platform 10.3.6.0    |_____WebLogic Server    |    |_____Core Application Server    |    |_____Administration Console    |    |_____Configuration Wizard and Upgrade Framework    |    |_____Web 2.0 HTTP Pub-Sub Server    |    |_____WebLogic SCA    |    |_____WebLogic JDBC Drivers    |    |_____Third Party JDBC Drivers    |    |_____WebLogic Server Clients    |    |_____WebLogic Web Server Plugins    |    |_____UDDI and Xquery Support    |    |_____Evaluation Database    |_____Oracle Coherence    |    |_____Coherence Product Files    |_____JDKs         |_____SUN SDK 1.6.0_29         |_____Oracle JRockit 1.6.0_29 SDK    *Estimated size of installation: 1,276.0 MBEnter [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing files..0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing JDK....0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Performing String Substitutions...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Configuring OCM...0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Creating Domains...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installation CompleteCongratulations! Installation is complete.Press [Enter] to continue or type [Exit]> [weblogic@pratik ~]$ Note: All the inputs are in Bold 3) Silent mode:              1) Log in to the target Unix system.             2) Create a silent.xml file that defines the configuration settings normally entered by a user during an interactive installation process, such as graphical-mode or console-mode installation. <?xml version="1.0" encoding="UTF-8"?><bea-installer>     <input-fields>        <data-value name="BEAHOME" value="/home/oracle/WLS1036" />        <data-value name="WLS_INSTALL_DIR" value="/home/oracle/WLS1036/wlserver_10.3" />        <data-value name="COMPONENT_PATHS" value="WebLogic Server|Oracle Coherence" />    </input-fields></bea-installer> <!-- Note: This sample silent.xml file is used to install all the components of WebLogic Server and Oracle Coherence. All the values in Bold are the variables. -->               3) Place the silent.xml file in the same directory as where the WebLogic Server Package installer is located.              4) Go to the directory that contains the installation program.              5) Start the installer as follows: [weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851516-rwxrwxr-x 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin-rw-rw-r-- 1 weblogic weblogic       331 Jul  5 03:48 silent.xml[weblogic@pratik WLSInstallers]$ cat silent.xml<?xml version="1.0" encoding="UTF-8"?><bea-installer>        <input-fields>                <data-value name="BEAHOME" value="/home/oracle/WLS1036" />                <data-value name="WLS_INSTALL_DIR" value="/home/oracle/WLS1036/wlserver_10.3" />                <data-value name="COMPONENT_PATHS" value="WebLogic Server|Oracle Coherence" />        </input-fields></bea-installer>[weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin -mode=silenlent.xml -log=/home/oracle/WLSInstallers/install.logExtracting 0%....................................................................................................100%[weblogic@pratik WLSInstallers]$ -log=/home/oracle/WLSInstallers/install.log creates a installation log(install.log) under "/home/oracle/WLSInstallers/", when installation completes you will see the following printed in the log file: 2012-07-05 03:59:36,788 INFO  [WizardController] com.bea.plateng.wizard.silent.tasks.LogTask - The installation was successfull! For other configurable values in silent.xml refer: Values for the Sample silent.xml File for WebLogic Server Important links to Refer: Running the Installation Program in Graphical Mode Running the Installation Program in Console Mode Running the Installation Program in Silent Mode

  Read the article

• Why eclipse is hanging while in debug mode ?

  - by Pratik

  We are developing our web application using JAVA GWT framework. We are using Eclipse Indigo as a development GUI. We are facing problems while debugging the JAVA gwt application in eclipse. Most of the time, Eclipse hangs while debugging. We tried to increase the memory buffer size in eclipse but no luck. We had tried to run the eclipse in various environment like Windows, Fedora 16, Cent OS. but some how not getting positive results. Can anyone help me out to decide which OS, and eclipse or version should we have to use so can able to resolve the hanging issue? Thanks in advance. Pratik

  Read the article

• Speech Recognition.

  - by Arun Thakkar

  Hello Everyone, Hope you all are fine and also in one of your best moods!! I need your help, I need to develop iPhone application which recognize Voice, and based on Result it perform further tasks. I know iPhone 3.0 Doesn't support Speech recognition and i need to implement Speech recognition Software at server side, i know this thing only, Since i am newbie i Don't know How to deal with that. Mean Which software i need to buy and implement it at server side, and how to use that Service ?? So if you have any idea about Speech Recognition and its related softwre and also usage of that, Please post your Reply. Thank You, Regards, Arun Thakkar.

  Read the article

• Facebook Source path issue in iPhone

  - by Arun Thakkar

  Hello everyone!! Hope You all are fie and also in one of your best of moods!! I need your help to solve an issue with Facebook. I have integrate Facebook Connect with my iPhone app. So as per step i have to write path of src folder into 'Header path info' Field in Project Build. I have given the absolute path to 'Header path info' Field. and its run fine without any Error.. But, Now When i Move the project folder to another destination, its but obvious, that path of src folder will change… So Now after moving file, when i run an application, It gives path error. So is there any way to solve this path issue? this comes when i run an app in simulator, and i guess It also won't run in iPhone because of problem of path of src folder. Kindly accept my Apologize if i have written anything wrong.. Looking Forwards, Thanks, Arun Thakkar

  Read the article

• iPhone SDK 3.2 beta and iPhone SDK 3.1.2

  - by pratik

  Hello, Currently I am using iPhone SDK 3.1.2 for developing iPhone apps. Apple has recently released iPhone SDK 3.2 beta and I want to try my hands with it. But my problem is that I want to use both versions of SDKs, 3.1.2 since I am currently developing apps and uploading on app store, 3.2 beta to start trying the new version (but Apple will not accept apps on App Store, if developed using 3.2 beta) Please guide me. Regards, Pratik

  Read the article

• asp.net application + single sign on

  - by pratik

  Hello, I want to implement single sign on in my asp.net web application. Scenario is something like below: user will get registered / sign up at "account.example.com" there will a link to "professional.example.com" when user goes to this link (step 2), they must remain logged in over here. Please suggest me the best solution for this. Regards, Pratik

  Read the article

• Why DB constraints are not added during table creation.

  - by Pratik

  Hi All, What is the difference between these to ways of table creation. CREATE TABLE TABLENAME( field1.... field2... add constraint constraint1; add constraint constraint2; ) AND CREATE TABLE TABLENAME( field1.... field2... ) ALTER TABLE TABLENAME add constaint1 ALTER TABLE TABLENAME add constaint2 Moreover the first scripts fails on the SQL+ but they pass on sqldeveloper Thanks! Pratik

  Read the article

• image Gallery in iPhone

  - by Arun Thakkar

  Hello EveryOne!! Hope You all are fine and also in Your best of moods!! I need You Guys help.. I need to Create an Image Gallery!! That may be use Concept of Scrolling and Paging together. When i Click on Button, It will open new view in landscape mode. This View is for my Image Gallery.. It Shows 5 Images 1) - Centered Large Image With its description on Bottom. 2) - Next Coming image on left side, This image is slightly tilled at some angle, Without any description at bottom. 3)next to next coming image on left to 2nd image. 4) - previous image on right side, This image is slightly tilled at some angle, Without any description at bottom. 5)Previous to Previous image on right of 4th image And All images are scrollable.. like When i scroll 2nd image, it Will move to Center and show its description and image Which is already centered move to previous image. Sorry for my Confused English, I have also given link Bellow. kindly Check it. Click here For Showing image. I Tried for Basic code of paging and scrolling but unluckily nothing helpful. Kindly share your knowledge as well as Guide me to develop such image gallery. Looking forwards. Thanks, Regards, Arun Thakkar

  Read the article

• Get Image from Byte Aarray.

  - by Arun Thakkar

  Hello Everyone!! Hope You all are fine and also in one of your best of moods!! Hope You all are Enjoying iPhone development. I herewith one issue that i am not able to solve, may be i don't know the depth concept of iPhone. So Its my humble requet to you to guide me or suggest or share your ideas. I do find an issue with getting an image from Bytes array. I am calling a webservice which returns an image in form of Bytes Array as response. I have Converted this bytes array in to form of NSData, Now i have NSData, But When i Try to get an image from this NSData, It shows nil. I Did lots of R&D and Find one suggestion to use base64 encoder, But unfortunately because of not proper guidance I was not able to Implement that. I was also suggested to use OPenSSL Library for base64 from url http://www.cocoadev.com/index.pl?BaseSixtyFour But again i was not able to include #include #include these two files. as in Newer Version of SDK 3.X family Apple has depreciated those (as i guess). So Now i need help from you guys. kindly help me if you have solution or if you know the steps to solve these. Looking Forwards. Regards, Arun Thakkar

  Read the article

• Noftification between J2EE components.

  - by Pratik

  Hi There! I have a design problem . My application has multiple J2EE components ,In simple terms one acts as a service provider(Non UI) and others are consumers(UI webapp) . The consumer gets the configuration data from the service provider(this basically reads the data from DB) during the start up and stores it in the Cache. The cache gets refreshed after periodic time to reflect any changes done at the database. The Problem Apart from the cache refresh ,I also want to notify the consumers when someone changes the DB . that configuration has been changed please reload it. What notification mechanism's can I use to achieve this. Thanks! Pratik

  Read the article

• Notification between J2EE components.

  - by Pratik

  Hi There! I have a design problem . My application has multiple J2EE components ,In simple terms one acts as a service provider(Non UI) and others are consumers(UI webapp) . The consumer gets the configuration data from the service provider(this basically reads the data from DB) during the start up and stores it in the Cache. The cache gets refreshed after periodic time to reflect any changes done at the database. The Problem Apart from the cache refresh ,I also want to notify the consumers when someone changes the DB . that configuration has been changed please reload it. What notification mechanism's can I use to achieve this. Thanks! Pratik

  Read the article

• Common way to compare timestamp in oracle, postgres and mssql

  - by Pratik

  Hi There! I am writing a sql query which involves finding if timestamp falls in particular range of days . I have written that in the postgres but it doesn't works in oracle and msssql. Is there are common way to compare the timestamp across different database. My postgres sql looks something like this ... AND creation_date < (CURRENT_TIMESTAMP - interval '5 days') AND creation_date >= (CURRENT_TIMESTAMP - interval '15 days') ... Thanks! Pratik

  Read the article

• iPhone + AdMob + remove the Ad view

  - by pratik

  Hello, I have integrated AdMob in my iPhone application. I am adding an Ad view in of my UIViewController as follows: ProgrammaticAdViewController *temp = [[ProgrammaticAdViewController alloc] init]; temp = [[ProgrammaticAdViewController alloc] initWithNibName:nil bundle:nil]; [self.view addSubview:temp.view]; So, I will be able to see an Ad view on top of my UIViewController. Now I have two problems: I am not able to tap on certain buttons of my UIViewController on which I have added the Ad View. So, for temporary purpose I adding the Ad view as: [self.view insertSubView:temp.view atIndex:1]; I want to remove the Ad view after sometime so I am using: [temp.view removeFromSuperView]; But my Ad view is not being removed. Please help me. Regards, Pratik

  Read the article

• iPhone native app + payment gateway

  - by pratik

  Hello, I want to implement payment gateway for iPhone native app. I have read in few of the sites that I can integrate apple payment gateway for this through In App Purchase. But if I want to do through In App Purchase then, I have register each of my product with AppStore and set a price margin for each. Rather I am building something like shopping cart where prices of products are different. Please guide how should I proceed, is there any other payment gateway that I can integrate with my iPhone native app. Regards, Pratik

  Read the article

• iPhone + alternative to drop downs

  - by pratik

  Hello, I am developing native iPhone app. I have one requirement that, there are 5 drop downs in the screen, where user will select each value and based on that there will be a graph generated on screen. Also the drop downs are cascading, meaning that depending on value selected in upper drop down, the values in lower drop downs will change. If it was a web app than, I had no problem as we have drop downs available. But it is a native iPhone app and we don't have drop down in iPhone SDK. Please suggest me some other alternative to achieve the same. Regards, Pratik

  Read the article

• iPhone + upgrade existing paid application on app store to free application with In App purchase + w

  - by pratik

  Hello, I have implemented In App purchase in my existing application. This application is currently available on app store as paid application, I want to update this paid application to free application with this In App purchase feature, where users can download it freely and have to pay for few features to unlock them. But the problem is that, if I update the existing paid application as free application (with few features locked and user has to buy it to unlock it), what about the users who have already purchased this application. Because when they will update to new free application, few features will be locked and they have to pay again to unlock them (why should they pay, if they have already purchased whole application previously). Regards, Pratik

  Read the article

• iPhone + selecting a portion of UIImage using some rectangular frame and than cropping it

  - by pratik

  Hello, I have requirement of selecting a portion of UIImage displayed on iPhone screen (for e.g. selecting the face from the image of some human being) using some rectangular type of frame. It means a rectangular type of frame can be moved across the image to place it at portion that we want. After placing it, I need to resize the frame in order to have that portion completely fit in the frame. Finally, the UIImage should be cropped so that I have a UIImage only displaying the portion that I selected using the frame. Please help me. Regards, Pratik

  Read the article

• How to enable SMART?

  - by Pratik Koirala

  I want to conduct a SMART test on my drive but it was disabled. So, i used sudo smartctl -s on /dev/sda but the result was smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-26-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF ENABLE/DISABLE COMMANDS SECTION === Error SMART Enable failed: scsi error aborted command Smartctl: SMART Enable Failed. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. How to overcome this problem?

  Read the article

• Why do large IT projects tend to fail or have big cost/schedule overruns?

  - by Pratik

  I always read about large scale transformation or integration project that are total or almost total disaster. Even if they somehow manage to succeed the cost and schedule blow out is enormous. What is the real reason behind large projects being more prone to failure. Can agile be used in these sort of projects or traditional approach is still the best. One example from Australia is the Queensland Payroll project where they changed test success criteria to deliver the project. See some more failed projects in this SO question Have you got any personal experience to share?

  Read the article

• Is it correct to fix bugs without adding new features when releasing software for system testing?

  - by Pratik

  This question is to experienced testers or test leads. This is a scenario from a software project: Say the dev team have completed the first iteration of 10 features and released it to system testing. The test team has created test cases for these 10 features and estimated 5 days for testing. The dev team of course cannot sit idle for 5 days and they start creating 10 new features for next iteration. During this time the test team found defects and raised some bugs. The bugs are prioritised and some of them have to be fixed before next iteration. The catch is that they would not accept the new release with any new features or changes to existing features until all those bugs fixed. The test team says that's how can we guarantee a stable release for testing if we also introduce new features along with the bug fix. They also cannot do regression tests of all their test cases each iteration. Apparently this is proper testing process according to ISQTB. This means the dev team has to create a branch of code solely for bug fixing and another branch where they continue development. There is more merging overhead specially with refactoring and architectural changes. Can you agree if this is a common testing principle. Is the test team's concern valid. Have you encountered this in practice in your project.

  Read the article

• PHP 5.2 installation with GD on CentOS 6

  - by Pratik Thakkar

  I am trying to install PHP 5.2.17 on CentOS 6.2. I have downloaded RPMs from http://www6.atomicorp.com/channels/atomic/centos/6/i386/RPMs/ Problem is that the PHP RPM seems to have GD disabled by default. Hence in spite installing php-gd RPM, GD is disabled. Is there any way that I can enable GD. Atomicorp seems to be the only website that has PHP 5.2.17 RPMs. I am not an advanced user to be able to compile PHP. I would appreciate help on this.

  Read the article

• Help me start out with OpenGL

  - by Arun Thakkar

  Till today I am working with Basic UIKIT application but now onwards I need to work in OpenGL. Problem is I have not any idea about OpenGL and am confused lot about how to start and from where to start. I need to create an application which is same as "iBeer" (see movie in YouTube). So I am having lots of confusion about how do I create graphics of beer that you seen in application, so what should be preferred library?

  Read the article

• MOSS 2007 central administration - cannot connect to the configuration database

  - by Thakkar

  I am unable to access Sharepoint Central Administration. I installed MOSS 2007 successfully on Windows Server 2008 (IIS7 and SQL Server 2005), I launched the admin and got "Cannot connect to the configuration database" error. Application pool is using NetworkService account which has access to SQL Server. I can access the configuration databases through SQL Management Studio. SQL server is on the same machine. Any help, suggestions on how to solve the problem? I am very new to SharePoint.

  Read the article

• use svcutil to map multiple namespaces for generating wcf service proxies

  - by Pratik

  I want to use svcutil to map multiple wsdl namespace to clr namespace when generating service proxies. I use strong versioning of namespaces and hence the generated clr namespaces are awkward and may mean many client side code changes if the wsdl/xsd namespace version changes. A code example would be better to show what I want. // Service code namespace TestService.StoreService { [DataContract(Namespace = "http://mydomain.com/xsd/Model/Store/2009/07/01")] public class Address { [DataMember(IsRequired = true, Order = 0)] public string street { get; set; } } [ServiceContract(Namespace = "http://mydomain.com/wsdl/StoreService-v1.0")] public interface IStoreService { [OperationContract] List<Customer> GetAllCustomersForStore(int storeId); [OperationContract] Address GetStoreAddress(int storeId); } public class StoreService : IStoreService { public List<Customer> GetAllCustomersForStore(int storeId) { throw new NotImplementedException(); } public Address GetStoreAddress(int storeId) { throw new NotImplementedException(); } } } namespace TestService.CustomerService { [DataContract(Namespace = "http://mydomain.com/xsd/Model/Customer/2009/07/01")] public class Address { [DataMember(IsRequired = true, Order = 0)] public string city { get; set; } } [ServiceContract(Namespace = "http://mydomain.com/wsdl/CustomerService-v1.0")] public interface ICustomerService { [OperationContract] Customer GetCustomer(int customerId); [OperationContract] Address GetStoreAddress(int customerId); } public class CustomerService : ICustomerService { public Customer GetCustomer(int customerId) { throw new NotImplementedException(); } public Address GetStoreAddress(int customerId) { throw new NotImplementedException(); } } } namespace TestService.Shared { [DataContract(Namespace = "http://mydomain.com/xsd/Model/Shared/2009/07/01")] public class Customer { [DataMember(IsRequired = true, Order = 0)] public int CustomerId { get; set; } [DataMember(IsRequired = true, Order = 1)] public string FirstName { get; set; } } } 1. svcutil - without namespace mapping svcutil.exe /t:metadata TestSvcUtil\bin\debug\TestService.CustomerService.dll TestSvcUtil\bin\debug\TestService.StoreService.dll svcutil.exe /t:code *.wsdl *.xsd /o:TestClient\WebServiceProxy.cs The generated proxy looks like namespace mydomain.com.xsd.Model.Shared._2009._07._011 { public partial class Customer{} } namespace mydomain.com.xsd.Model.Customer._2009._07._011 { public partial class Address{} } namespace mydomain.com.xsd.Model.Store._2009._07._011 { public partial class Address{} } The client classes are out of any namespaces. Any change to xsd namespace would imply changing all using statements in my client code all build will break. 2. svcutil - with wildcard namespace mapping svcutil.exe /t:metadata TestSvcUtil\bin\debug\TestService.CustomerService.dll TestSvcUtil\bin\debug\TestService.StoreService.dll svcutil.exe /t:code *.wsdl *.xsd /n:*,MyDomain.ServiceProxy /o:TestClient\WebServicesProxy2.cs The generated proxy looks like namespace MyDomain.ServiceProxy { public partial class Customer{} public partial class Address{} public partial class Address1{} public partial class CustomerServiceClient{} public partial class StoreServiceClient{} } Notice that svcutil has automatically changed one of the Address class to Address1. I don't like this. All client classes are also inside the same namespace. What I want Something like this: svcutil.exe /t:code *.wsdl *.xsd /n:"http://mydomain.com/xsd/Model/Shared/2009/07/01, MyDomain.Model.Shared;http://mydomain.com/xsd/Model/Customer/2009/07/01, MyDomain.Model.Customer;http://mydomain.com/wsdl/CustomerService-v1.0, MyDomain.CustomerServiceProxy;http://mydomain.com/xsd/Model/Store/2009/07/01, MyDomain.Model.Store;http://mydomain.com/wsdl/StoreService-v1.0, MyDomain.StoreServiceProxy" /o:TestClient\WebServiceProxy3.cs This way I can logically group the clr namespace and any change to wsdl/xsd namespace is handled in the proxy generation only without affecting the rest of the client side code. Now this is not possible. The svcutil allows to map only one or all namespaces, not a list of mappings. I can do one mapping as shown below but not multiple svcutil.exe /t:code *.wsdl *.xsd /n:"http://mydomain.com/xsd/Model/Store/2009/07/01, MyDomain.Model.Address" /o:TestClient\WebServiceProxy4.cs But is there any solution. Svcutil is not magic, it is written in .Net and programatically generating the proxies. Has anyone written an alternate to svcutil or point me to directions so that I can write one.

  Read the article

• What does suds mean by "<faultcode/> not mapped to message part" ?

  - by Pratik Patel

  I'm using suds for the first time and trying to communicate with a server hosted by an external company. When I call a method on the server I get this XML back. soap:Server Can't use string ("") as an ARRAY ref while "strict refs" in use at /vindicia/site_perl/Vindicia/Soap/DocLitUtils.pm line 130. The exception thrown is this: File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\client.py", line 538, in __call__ return client.invoke(args, kwargs) File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\client.py", line 602, in invoke result = self.send(msg) File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\client.py", line 634, in send result = self.succeeded(binding, reply.message) File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\client.py", line 669, in succeeded r, p = binding.get_reply(self.method, reply) File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\bindings\binding.py", line 157, in get_reply result = self.replycomposite(rtypes, nodes) File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\bindings\binding.py", line 227, in replycomposite raise Exception(' not mapped to message part' % tag) Exception: not mapped to message part Any idea why suds is throwing the exception? Any thoughts on how it could be fixed?

  Read the article

1 2  | Next Page >