Search Results

Search found 220 results on 9 pages for 'pxe'.

Page 1/9 | 1 2 3 4 5 6 7 8 9  | Next Page >

• PXE boot very slow when PXE server is virtualbox

  - by sqrtsben

  As I read in questions here and on the Internet, PXE and Virtualbox don't seem to like each other too much. My problem is the following: I have a virtualized machine which hosts the DHCP and PXE server for 10 native clients. They are rebooted roughly every 10 mins and on each reboot, they need to boot a small linux (the initrd is ~4MB). Before, I had a native machine running and booting via PXE was very fast. Now, looking at the output of nload, I only get 500kbit/s whenever one machine is booting. The machines are connected via a GBit switch, so that can't be it. Also, when testing the connection speed to the outside, I have the full bandwidth available. Is VBox just unable to deal with large amounts of UDP packets? Can anyone point me in the right direction here?

  Read the article

• PXE-boot for Ubuntu 10.04 Desktop version

  - by omkar

  My aim is to Install the Ubuntu 10.04 desktop version on a remote machine using PXE-BOOT. I'm trying to apply the steps given in PXE-BOOT for Ubuntu 9.10 . (I know this is for 9.10). In "Step 8. Setting Up Boot Files", it says cp -a /media/cdrom/install/netboot/* /tftpboot/ but I wasn't able to find the netboot folder in my Ubuntu 10.04 Desktop CD-Rom. Does that folder only exist in Ubuntu Server edition? Is it possible to do this in the Desktop edition?

  Read the article

• BAD ARCHIVE MIRROR using PXE BOOT method

  - by omkar

  i m trying to automatically install UBUNTU on a client PC by using the method of PXE BOOT method....my Objectives are below:- i m following the steps given in this link installation using PXE BOOT 1:-the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. 2:-the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server i have installed DHCP3-server,Apache2 and TFTP for helping me with the installation. i have nearly achieved my first objective,i m able to boot my client using the files stored in the server,but during the installation stage it is asking me to "CHOOSE A MIRROR of UBUNTU ARCHIVE".i gave the server's IP address and the path in the server where the files are located but then too its giving me error "BAD ARCHIVE MIRROR". so is it possible that instead of downloading all the files from the internet and storing them on my disk , can i use the files which comes with the UBUNTU-CD, and how to store this files in what format (should i zip them ) on the disk. secondly i am also generating the ks.cfg which i wanted to give to the client for automatic installation of the OS ,so how should the configuration file be given to the installation process.

  Read the article

• Bad archive mirror using PXE boot method

  - by user11566

  I'm trying to automatically install Ubuntu on a client PC by using the PXE BOOT method....my Objectives are below: I am following the steps given in this link installation using PXE BOOT the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server I have installed DHCP3-server,Apache2 and TFTP to help me with the installation. I have nearly achieved my first objective, I am able to boot my client using the files stored in the server but during the installation stage it is asking me to CHOOSE A MIRROR OF UBUNTU ARCHIVE I gave the server's IP address and the path in the server where the files are located but then its giving me this error BAD ARCHIVE MIRROR So is it possible that instead of downloading all the files from the internet and storing them on my disk can I use the files which comes with the UBUNTU-CD, and how to store these files in what format (should I zip them) on the disk? secondly I am also generating the ks.cfg which I wanted to give to the client for automatic installation of the OS. So how should the configuration file be given to the installation process?

  Read the article

• Resealing windows XP stops PXE working

  - by zeocrash

  I'm trying to capture a drive image of a windows xp pro machine. I've gone through the steps and resealed the machine. When i try and network boot the PXE instantly gives the message "PXE-MOF" and ends. I have managed to get network boot to work on this machine whenever XP is not resealed. I have tried Multiple times to get PXE to work after resealing windows, but with no luck. As soon as i unseal it, PXE works every time. I know PXE is supposed to work independent of what's on the hard drive. Is there any way that resealing windows could cause PXE to stop working.

  Read the article

• Long pause in pxe/preseed install

  - by Bo Kersey

  I'm encountering a long pause during unattended (preseeded) install of precise server via pxe. The install eventually works, but appears to just sit there for 20 or 30 minutes after it authenticates the mirror. There is nothing in the logs during this time, even with full debug. Log excerpt: Aug 2 13:29:59 net-retriever: Signature made Fri Aug 2 06:05:28 2013 UTC using DSA key ID 437D05B5 Aug 2 13:29:59 net-retriever: gpgv: Aug 2 13:29:59 net-retriever: Good signature from "Ubuntu Archive Automatic Signing Key <[email protected]>" Aug 2 13:29:59 net-retriever: Aug 2 13:50:10 anna[5072]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Aug 2 13:50:10 anna[5072]: DEBUG: resolver (efi-modules): package doesn't exist (ignored) Bug related to this problem that is not being worked. I'm surprised that no one else is complaining about this. Or, is there some other way to do an unattended install that everyone else is using?

  Read the article

• PXE boot FreeBSD iso from pxelinux server

  - by Andrew

  I'm using FOG as a TFTP / PXE server and would like to be able to boot a FreeBSD LiveCD (specifically pfSense, but it could be any LiveCD, really); I've found HOWTOs for booting a "netboot" BSD but they all seem to use a BSD server. So: Is it possible to PXE boot BSD from a Linux server? Is it possible to PXE boot a BSD LiveCD? Is it possible to PXE boot a Linux LiveCD? My main motivation is to be able to boot small LiveCD images (e.g. < 100MB) that I may only use once and don't want to burn a physical CD for.

  Read the article

• EFI pxe network boot error

  - by Lee

  Asking this on both [serverfault][1] and [superuser][2]. When attempting to network boot RHEL 5.4 on an old ia64 machine I get the following error : ![alt text][3] So I've basically followed the tutorial here : [http://www-uxsup.csx.cam.ac.uk/pub/doc/suse/sles9/adminguide-sles9/ch04s03.html][4] DHCPD,TFTPD etc are already setup and working with standard x86 PXE clients. I've unpacked the boot.img file into /tftpboot/ia64/ and passed the path to the elilo.efi file via DHCP with the filename ""; option. Changing this filename generates a PXE file not found error (see below). So I assume that PXE has found the file... ![alt text][5] The only thing wrong I can find in the logs is : Jan 6 19:49:31 dhcphost in.tftpd[31379]: tftp: client does not accept options Any ideas? I'm sure I hit a problem like this a few years ago but I can't remember the fix :) Thanks in advance! Thanks in advance! [1]: http:// serverfault.com/questions/100188/ efi-pxe-network-boot-error [2]: http:// superuser.com/questions/92295/ efi-pxe-network-boot-error [3]: http:// i.imgur.com/Zx1Jy. png [4]: http:// www-uxsup.csx.cam.ac.uk/pub/doc/suse/sles9/adminguide-sles9/ch04s03.html [5]: http:// i.imgur.com/CEzGf. jpg

  Read the article

• dell poweredge 860 always pxe boot

  - by Berto

  Hi, We bought a dell poweredge 860, and installed windows server 2008 std. So far so good. Now everytime the server reboots, it try's the pxe boot, and hangs on "cant find pxe bootable, press f1 to continue or f2 to setup". Now, i tried all the settings in the bios (it's the latest - A05), i have the nic active without pxe (i also tried with the nic off)... well, i tried everyting off and on the bios and it still goes to pxe booting. I have one sata drive, that is boot's after the f1. I would like to keep the system updated, but i can't because of the reboot, can someone point me to some direction? Can i give any more information of the server? If yes, what do you want? It has been a week on google trying to figure out this one. Thx

  Read the article

• PXE-E32 TFTP Open Timeout While Attempting to PXE Boot from Windows Deployment Services

  - by bschafer

  I'm running Windows Deployment Services on Windows Server 2008 R2 on top of an ESX 4.0 box. This is the only function of this VM instance, although it had previously functioned as an AD Domain Controller. My DHCP server is running on our primary Domain Controller, which is also Server 2008 R2, but running on metal. Everything was working perfectly until we recently had our backup generator fail during a power outage, causing all of our servers and networking equipment to lose power for a period of time. When we brought all of our equipment back up, everything was working as expected except for WDS. Our network is split up into several different vlans. Now, depending on which vlan the client computer is on, it's behaving differently when attempting to PXE boot into WDS. Our servers are located on the 10.55.x.x vlan, which, due to the nature of it, has no DHCP server active in it. The first computer we plugged in happened to be in the 10.99.x.x vlan, which is supposed to be reserved for network management devices (i.e. switches), but we've been using it occasionally otherwise. That computer gave us PXE-E11 ARP Timeout errors. When we moved to a different computer on the 10.19.x.x vlan (for general purpose use), it finally gets an IP from DHCP, but it presents us with a very stumping PXE-E32 TFTP Open Timeout error. Before the power outage, it didn't matter which vlan a device was on; it would PXE boot and image just fine. I've made no changes to anything server-side. Everything is configured exactly the same way it was on my WDS and DHCP servers as before the power outage. I've tried several different computers, including different models. All of this, combined with the quirky behavior depending on the vlan, makes me think something went wrong in one or more of our switches, probably because of the power outage. Unfortunately, I'm no network guy, and I know very little about how to configure our switches properly. Is this an issue with switches, etc? If so, how can I fix it? Is there some magical option I'm not aware of? Does anybody out there have any hunches? I've pretty much exhausted my ideas. Our main switch is an HP Procurve 5406. We also have 3x HP Procurve 4208 switches. The ESX Server is an HP ProLiant DL380 G6. The WDS VM is currently using the VMXNET3 network adaptor, but we've also tried the E1000 adaptor.

  Read the article

• PXE in an 802.1X environment

  - by newmanth

  My organization is about to implement 802.1X on our enterprise, but we currently use PXE-based OS deployment sequences in SCCM. I'm looking for a way to continue using PXE in an 802.1X environment. Our infrastructure uses Cisco network gear running at 12.2 (or newer). We are an all Windows network and all clients support 802.1X. All new workstations have Intel AMT available (but not factory configured). In a worst case scenario, we'll use a guest vlan for OSD, but I'd rather have the OSD occur in an authenticated session. I've seen white papers that describe using AMT to act as a supplicant for PXE boot, but can't find any implementation details...

  Read the article

• How useful is PXE booting?

  - by J. T.

  Hi All, How fast is booting over PXE?. Is it conceivable to boot a linux installation? Does it take a long time? I have never really looked into it at all, but I was considering setting up a compiler farm and thought this might be interesting to try. Does one have a main computer that the PXE answers to to get its image? Can you have multiple PXE images to pick from? Thanks!

  Read the article

• how to broadcast a PXE server like Trinity Rescue Kit

  - by Larry G. Wapnitsky

  I would like to set up a portable PXE server for diagnostic purposes. The issue is that I won't always have access to the DHCP server, or the router itself (sometimes a home router) doesn't have an easily accessible place to set the servername/file for broadcast. I know that Trinity Rescue Kit is able to broadcast its PXE server without its own DHCP server. Can anyone point me in the direction to set this up on my own (without Trinity)? Thanks.

  Read the article

• Problem with PXE boot

  - by user70523

  Hi, I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

  Read the article

• Use GRUB/GRUB2 to PXE boot OS image

  - by Jack

  Asked this in stackoverflow but they recommended I post this here: Here is the situation I am in: I currently have a Windows drive that boots XP. The BIOS does not support PXE booting so this is out of the question. Therefore, I was thinking I could install a customized GRUB bootloader on it instead such that it will have the option to PXE boot an image from a DHCP server connected to it and have the option to load Windows as it normally does (two items in menu). The catch is it may need to be automated (meaning no keyboard), so is there any way to run a script pre-boot during GRUB loading that determines if DHCP / TFTP servers are running and attempt to PXE boot an image from the network (and if not, say timeout of 10 seconds, regularly boot from Windows drive)? If this is not possible, what are some other options / suggestions? I was reading up on grub4dos as well but I'm not sure that is what I need. FWIW, I'm free to do whatever I want to the drive. I'd really appreciate some help on this as I'm not sure where to start. Thanks!

  Read the article

• InfiniBand Enabled Diskless PXE Boot

  - by Neeraj Gupta

  When you want to bring up a compute server in your environment and need InfiniBand connectivity, usually you go through various installation steps. This could involve operating systems like Linux, followed by a compatible InfiniBand software distribution, associated dependencies and configurations. What if you just want to run some InfiniBand diagnostics or troubleshooting tools from a test machine ? What if something happened to your primary machine and while recovering in rescue mode, you also need access to your InfiniBand network ? Often times we use opensource community supported small Linux distributions but they don't come with required InfiniBand support and tools. In this weblog, I am going to provide instructions on how to add InfniBand support to a specific Linux image - Parted Magic.This is a free to use opensource Linux distro often used to recover or rescue machines. The distribution itself will not be changed at all. Yes, you heard it right ! I have built an InfiniBand Add-on package that will be passed to the default kernel and initrd to get this all working. Pr-requisites You will need to have have a PXE server ready on your ethernet based network. The compute server you are trying to PXE boot should have a compatible IB HCA and must be connected to an active IB network. Required Downloads Download the Parted Magic small distribution for PXE from Parted Magic website. Download InfiniBand PXE Add On package. Right Click and Download from here. Do not extract contents of this file. You need to use it as is. Prepare PXE Server Extract the contents of downloaded pmagic distribution into a temporary directory. Inside the directory structure, you will see pmagic directory containing two files - bzImage and initrd.img. Copy this directory in your TFTP server's root directory. This is usually /tftpboot unless you have a different setup. For Example: cp pmagic_pxe_2012_2_27_x86_64.zip /tmp cd /tmp unzip pmagic_pxe_2012_2_27_x86_64.zip cd pmagic_pxe_2012_2_27_x86_64 # ls -l total 12 drwxr-xr-x  3 root root 4096 Feb 27 15:48 boot drwxr-xr-x  2 root root 4096 Mar 17 22:19 pmagic cp -r pmagic /tftpboot As I mentioned earlier, we dont change anything to the default pmagic distro. Simply provide the add-on package via PXE append options. If you are using a menu based PXE server, then add an entry to your menu. For example /tftpboot/pxelinux.cfg/default can be appended with following section. LABEL Diskless Boot With InfiniBand Support MENU LABEL Diskless Boot With InfiniBand Support KERNEL pmagic/bzImage APPEND initrd=pmagic/initrd.img,pmagic/ib-pxe-addon.cgz edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 TEXT HELP * A Linux Image which can be used to PXE Boot w/ IB tools ENDTEXT Note: Keep the line starting with "APPEND" as a single line. If you use host specific files in pxelinux.cfg, then you can use that specific file to add the above mentioned entry. Boot Computer over PXE Now boot your desired compute machine over PXE. This does not have to be over InfiniBand. Just use your standard ethernet interface and network. If using menus, then pick the new entry that you created in previous section. Enable IPoIB After a few minutes, you will be booted into Parted Magic environment. Open a terminal session and see if InfiniBand is enabled. You can use commands like: ifconfig -a ibstat ibv_devices ibv_devinfo If you are connected to InfiniBand network with an active Subnet Manager, then your IB interfaces must have come online by now. You can proceed and assign IP address to them. This will enable you at IPoIB layer. Example InfiniBand Diagnostic Tools I have added several InfiniBand Diagnistic tools in this add-on. You can use from following list: ibstat, ibstatus, ibv_devinfo, ibv_devices perfquery, smpquery ibnetdiscover, iblinkinfo.pl ibhosts, ibswitches, ibnodes Wrap Up This concludes this weblog. Here we saw how to bring up a computer with IPoIB and InfiniBand diagnostic tools without installing anything on it. Its almost like running diskless !

  Read the article

• Multiple PXE boots on the same subnet for RIS and WDS

  - by Tim

  We are looking to migrate off our existing server 2003 sp2 machine, running RIS (which I know is WDS as of Server 2003 Sp2, but to be clear..) with a bunch of legacy RiSETUP images to a Server 2008 r2 box. Because the change in architecture (x86 to x64), and a limitation of the Server 2008 upgrade path that won't allow mixed-mode WDS services to be upgraded, I am forced to look at running Server 2003 for RIS and Server 2008 R2 for WDS for Windows 7 on the same network. The problem I'm facing is how to deal with both PXE services at the same time? I'd still like the existing RIS server to be available for production use, but start working on WDS for deploying Windows 7. Is there a way to have a sort of PXE "chooser" ? Or some other mechanism to be able to select which server the client should download the boot image from? Thanks!

  Read the article

• BAD ARCHIVE MIRROR using PXE BOOT method

  - by omkar

  i m trying to automatically install UBUNTU on a client PC by using the method of PXE BOOT method....my Objectives are below:- i m following the steps given in this link installation using PXE BOOT INSTALL 1:-the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. 2:-the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server i have installed DHCP3-server,Apache2 and TFTP for helping me with the installation. i have nearly achieved my first objective,i m able to boot my client using the files stored in the server,but during the installation stage it is asking me to "CHOOSE A MIRROR of UBUNTU ARCHIVE".i gave the server's IP address and the path in the server where the files are located but then too its giving me error "BAD ARCHIVE MIRROR". so is it possible that instead of downloading all the files from the internet and storing them on my disk , can i use the files which comes with the UBUNTU-CD, and how to store this files in what format (should i zip them ) on the disk. secondly i am also generating the ks.cfg which i wanted to give to the client for automatic installation of the OS ,so how should the configuration file be given to the installation process.

  Read the article

• PXE boot from USB NIC

  - by JoelHess

  Is there a USB solution to PXE boot? I want to use ghost or clonezilla or something to image a bunch of units that don't have on board ethernet, and no clear real way to add to it.

  Read the article

• PXE Booting with 2 NICs not finding DHCP server

  - by Xaver

  I have two NICs in a client PC. I have a WDS server. When I boot from PXE on client computer I receive: WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment. I think my client is trying to get an IP adress from the NIC which not connected to LAN. How to avoid this error?

  Read the article

• EFI support for Cobbler PXE booting

  - by William

  I'm wondering if EFI PXE booting is supported by a Cobbler provisioning server. Anyone more familiar with Cobbler have an idea? Thanks.

  Read the article

• Why Ubuntu Server asks to insert a CD-ROM when installed from PXE?

  - by MainMa

  I set up a PXE server which hosts both Ubuntu Desktop and Ubuntu Server. Ubuntu Desktop is installed successfully from PXE. Ubuntu Server seems to successfully load vmlinuz and initrd.gz, asks for the language, then the location, then the keyboard layout, and finally complains that it can't mount the CD-ROM: The content of /var/lib/tftpboot/pxelinux.cfg/default is the following: default ubuntu-installer/amd64/boot-screens/vesamenu.c32 menu title Ubuntu setup label ubuntu-14.04-desktop-amd64 menu label ubuntu-14.04-desktop-amd64 kernel ubuntu-14.04-desktop-amd64/vmlinuz.efi append initrd=ubuntu-14.04-desktop-amd64/initrd.lz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.1.41:/exports/ubuntu-14.04-desktop-amd64 splash -- label ubuntu-14.04-server-amd64 menu label ubuntu-14.04-server-amd64 kernel ubuntu-14.04-server-amd64/vmlinuz append initrd=ubuntu-14.04-server-amd64/initrd.gz root=/dev/nfs boot=install netboot=nfs nfsroot=192.168.1.41:/exports/ubuntu-14.04-server-amd64 splash -- What explains the fact that it requests the CD-ROM and how to avoid it?

  Read the article

• Installing Win7 over PXE through Serva fails on Loading Network Resources

  - by Armand

  Trying to install Win7 OS to a Lenovo E335 with no DVD/CD. I have to do it either over PXE/Network or USB. Although I am able to get passt the installation menu of Serva, it fails on Loading Network Resources ... FAILED No NIC/Driver, ABORTING! This is the only log on the Serva Client PC and nothing on the Serva-server. Would appreciate if someone can tell me how to go pass this error. THe network card works fine, it has already loaded the Windows installation structure on a X: drive on the new laptop. Another detail: I am using a normal Ethernet Cable to connect the PCs. Should this be enough or a crossover cable is a must in this case?

  Read the article

• PXE boot not happening due to DHCP issue .

  - by Nishant

  I could PXE boot this laptop to some extent yesterday but all of a sudden after some time it started to show this error message . I reinstalled my tftp server etc in between . It seems that DHCP lease issue is happening . The client wants some specific address I think ? How to resolve List item Client requested address 0.68.101.98 [06/06 04:37:27.658] no more address or address previously allocated by another server [06/06 04:37:27.658] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:29.670] Client requested address 0.68.101.98 [06/06 04:37:29.670] no more address or address previously allocated by another server [06/06 04:37:29.670] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:33.679] Client requested address 0.68.101.98 [06/06 04:37:33.679] no more address or address previously allocated by another server [06/06 04:37:33.679] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:41.699]

  Read the article

• PXE Boot not working

  - by Nishant

  Please explain the error in this screenshot DHCP Setting: This screenshot was taken after powering off the old comp hence he server interface is shown as the wireless card - it becomes 192.168.0.1 when I connect wires and power up the old laptop to boot via PXE. My scenario is simple. An old laptop and a new laptop . A cross over cable ( that I myself made from CAT 6 cable by cutting it and connecting 4 wires as mentioned in some doc). The new laptop ( tftp server ) has a Wirelss Card ( with which I am browsing and writing this ) . And the cable is connected between laptops . TFTP server ( new laptop details ) Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::f511:3d4a:ca01:122e%16 IPv4 Address. . . . . . . . . . . : 192.168.0.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.2 Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Achilles Link-local IPv6 Address . . . . . : fe80::99b1:8ae0:9e6c:f300%11 IPv4 Address. . . . . . . . . . . : 192.168.2.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.2.1

  Read the article

1 2 3 4 5 6 7 8 9  | Next Page >