Search Results

Search found 20 results on 1 pages for 'ranhiru cooray'.

Page 1/1 | 1 

• Trouble installing Rabbit VCS for nautilus

  - by Ranhiru Cooray

  I am using Ubuntu 11.10 and following instructions mentioned here to install Rabbit VCS. I added the PPA properly, did a sudo apt-get update and ran sudo apt-get install rabbitvcs-core rabbitvcs-nautilus rabbitvcs-thunar rabbitvcs-gedit rabbitvcs-cli There were dependency issues and I googled a bit and found out that I need to install RabbitVCS only for nautilus as that is the default file manager for Ubuntu. So I ran the install commands separately for rabbitvcs-core, rabbitvcs-gedit and rabbitvcs-cli. Now my understanding is that those are installed properly. However when I run the install command for rabbitvcs-nautilus, I still get a dependency issue. ranhiru@ranhiru-HP-HDX16-NoteBook-PC:~$ sudo apt-get install rabbitvcs-nautilus Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: rabbitvcs-nautilus : Depends: nautilus (< 1:3.0~) but 1:3.2.1-0ubuntu2 is to be installed Depends: python-nautilus (< 1.0~) but 1.0-0ubuntu2 is to be installed E: Unable to correct problems, you have held broken packages. How do I solve this?

  Read the article

• Any software to do minute by minute backup ?

  - by Ranhiru

  Of all the freeware backup programs i've checked out, the most frequent backup i could do automatically was every hour :( Is there any freeware out there that can backup my data every minute or so? :) I'm talking about a few mega bytes of VERY important data... Preferably over the LAN backup too :)

  Read the article

• My computer resets when i try to install Windows 7 (USB/DVD)

  - by Ranhiru

  I had a troublesome software starting up when Windows 7 was starting and i had no way to remove it because i couldn't log in to Windows. Not even safe mode. But i used Hiren's Boot CD to edit the registry to stop that software from starting up... But my efforts were not useful as Windows kept on going to an ultimate freeze just before the login screen should have been shown. And just freezes and I cannot do anything. So i decided heck with it and i now want to format the disk and reinstall a fresh copy of Windows 7. But now regardless of USB or DVD i use to boot the setup, it loads fine till you see the animating Windows and it just resets the laptop! Just plain resets! Hiren's Boot CD and Mini XP, strange enough but still works :( Any ideas what might be causing the laptop to reset in Windows 7 setup?

  Read the article

• Why cant i install ANY operating system??

  - by Ranhiru

  I tested the memory and i tested the hard disk and everything is fine! Mini XP booted from Hirens Boot Disk works :( I tried Windows 7, Windows XP SP3 and even Ubuntu 10.04 :( All Operating Systems boots up to the point where they can load necessary files to start the OS and then resets the laptop Windows 7, only up to the point where the Windows Loading Animation is happening Ubuntu, only up to the point where the loading is done, shows a small screen and then goes to a blinking cursor and thats it... it keeps on blinking and sometimes resets the computer Windows XP SP3, loads all the drivers and everything and then the point where i should be able install the OS, it simply resets the laptop :( I have used the word reset instead of restart because the laptop completely turns off and then only turns back in Any solutions would be greatly appreciated

  Read the article

• How do i prevent a software from starting in Windows startup when you cannot boot in to windows?

  - by Ranhiru

  I installed a software recently but it has gone mad now and i cannot boot into Windows. How do i remove that application from Windows?? Safe Mode and Safe Mode with command prompt is not working :( Any other method without reinstalling the OS?? Thanx a lot in advance :)

  Read the article

• Can i create a virtual machine on my laptop to be used with another monitor?

  - by Ranhiru

  OK, the scenario is like this... I have my laptop... and I have another user without a unit. He has only a keyboard, mouse and a monitor. Is there anyway that I can make him use my computer by creating a virtual environment which he will access, BUT, without interfering with my work. I use my laptop and view my OS from the laptop monitor. I create a virtual environment (some OS probably XP) and run it. The virtual environment is displayed in the connected monitor and the other user uses it using the extra keyboard/mouse and the monitor but without interfering my screen! Is this possible? Stupid? Futuristic? Need more hardware?

  Read the article

• How do i convert String to Integer/Float in Haskell

  - by Ranhiru

  data GroceryItem = CartItem ItemName Price Quantity | StockItem ItemName Price Quantity makeGroceryItem :: String -> Float -> Int -> GroceryItem makeGroceryItem name price quantity = CartItem name price quantity I want to create a GroceryItem when using a String or [String] createGroceryItem :: [String] -> GroceryItem createGroceryItem (a:b:c) = makeGroceryItem a b c The input will be in the format ["Apple","15.00","5"] which i broke up using words function in haskell. I get this error which i think is because the makeGroceryItem accepts a Float and an Int. But how do i make b and c Float and Int respectively? *Type error in application *** Expression : makeGroceryItem a read b read c *** Term : makeGroceryItem *** Type : String -> Float -> Int -> GroceryItem *** Does not match : a -> b -> c -> d -> e -> f* Thanx a lot in advance :)

  Read the article

• Retrieving Encrypted Rich Text file and showing it in a RichTextBox C#

  - by Ranhiru

  OK, my need here is to save whatever typed in the rich text box to a file, encrypted, and also retrieve the text from the file again and show it back on the rich textbox. Here is my save code. private void cmdSave_Click(object sender, EventArgs e) { FileStream fs = new FileStream(filePath, FileMode.Create, FileAccess.Write); AesCryptoServiceProvider aes = new AesCryptoServiceProvider(); aes.GenerateIV(); aes.GenerateKey(); aes.Mode = CipherMode.CBC; TextWriter twKey = new StreamWriter("key"); twKey.Write(ASCIIEncoding.ASCII.GetString(aes.Key)); twKey.Close(); TextWriter twIV = new StreamWriter("IV"); twIV.Write(ASCIIEncoding.ASCII.GetString(aes.IV)); twIV.Close(); ICryptoTransform aesEncrypt = aes.CreateEncryptor(); CryptoStream cryptoStream = new CryptoStream(fs, aesEncrypt, CryptoStreamMode.Write); richTextBox1.SaveFile(cryptoStream, RichTextBoxStreamType.RichText); } I know the security consequences of saving the key and iv in a file but this just for testing :) Well, the saving part works fine which means no exceptions... The file is created in filePath and the key and IV files are created fine too... OK now for retrieving part where I am stuck :S private void cmdOpen_Click(object sender, EventArgs e) { OpenFileDialog openFile = new OpenFileDialog(); openFile.ShowDialog(); FileStream openRTF = new FileStream(openFile.FileName, FileMode.Open, FileAccess.Read); AesCryptoServiceProvider aes = new AesCryptoServiceProvider(); TextReader trKey = new StreamReader("key"); byte[] AesKey = ASCIIEncoding.ASCII.GetBytes(trKey.ReadLine()); TextReader trIV = new StreamReader("IV"); byte[] AesIV = ASCIIEncoding.ASCII.GetBytes(trIV.ReadLine()); aes.Key = AesKey; aes.IV = AesIV; ICryptoTransform aesDecrypt = aes.CreateDecryptor(); CryptoStream cryptoStream = new CryptoStream(openRTF, aesDecrypt, CryptoStreamMode.Read); StreamReader fx = new StreamReader(cryptoStream); richTextBox1.Rtf = fx.ReadToEnd(); //richTextBox1.LoadFile(fx.BaseStream, RichTextBoxStreamType.RichText); } But the richTextBox1.Rtf = fx.ReadToEnd(); throws an cryptographic exception "Padding is invalid and cannot be removed." while richTextBox1.LoadFile(fx.BaseStream, RichTextBoxStreamType.RichText); throws an NotSupportedException "Stream does not support seeking." Any suggestions on what i can do to load the data from the encrypted file and show it in the rich text box?

  Read the article

• How do i bind an image to a <asp:Image /> tag in Form View

  - by Ranhiru

  First i have a getProfileImage.aspx which accepts a CusID and TN as query strings and display n image. So getProfileImage.aspx?CusID=10&TN=Y will show the image fine in the browser :) But... Now i am presented with a Form View and i want to bind the src of the image to get the image from the getProfileImage.aspx page... The following code works fine :) 10 is the customer ID and the image is working fine... <asp:Image ID="Image1" runat="server" Height="151px" ImageUrl='~/getProfileImage.aspx?CusID=10&TN=N' /> But now i want to Bind the CusID value... <asp:Image ID="Image1" runat="server" Height="151px" ImageUrl='~/getProfileImage.aspx?CusID=<%# Bind("CusID") %>&TN=N' /> This simply does not work :( The getProfileImage.aspx is called with CusID=<%... where the way i see it the <%# Bind("CusID") % is not parsed by ASP which would have returned 10... <%# Bind("CusID") %> The above tag alone will work... but inserting it to the middle of the tag seems to break it... Any suggestions ? Thanx a lot in advance :)

  Read the article

• C++ .NET DLL vs C# Managed Code ? (File Encrypting AES-128+XTS)

  - by Ranhiru

  I need to create a Windows Mobile Application (WinMo 6.x - C#) which is used to encrypt/decrypt files. However it is my duty to write the encryption algorithm which is AES-128 along with XTS as the mode of operation. RijndaelManaged just doesn't cut it :( Very much slower than DES and 3DES CryptoServiceProviders :O I know it all depends on how good I am at writing the algorithm in the most efficient way. (And yes I my self have to write it from scratch but i can take a look @ other implementations) Nevertheless, does writing a C++ .NET DLL to create the encryption/decryption algorithm + all the file handling and using it from C# have a significant performance advantage OVER writing the encryption algorithm + file handling in completely managed C# code? If I use C++ .NET to create the encryption algorithm, should I use MFC Smart Device DLL or ATL? What is the difference and is there any impact on which one I choose? And can i just add a reference to the C++ DLL from C# or should I use P/Invoke? I am fairly competent with C# than C++ but performance plays a major role as I have convinced my lecturers that AES is a very efficient cryptographic algorithm for resource constrained devices. Thanx a bunch :)

  Read the article

• SQL Query - group by more than one column, but distinct

  - by Ranhiru

  I have a bidding table, as follows: SellID INT FOREIGN KEY REFERENCES SellItem(SellID), CusID INT FOREIGN KEY REFERENCES Customer(CusID), Amount FLOAT NOT NULL, BidTime DATETIME DEFAULT getdate() Now in my website I need to show the user the current bids; only the highest bid but without repeating the same user. SELECT CusID, Max(Amount) FROM Bid WHERE SellID = 10 GROUP BY CusID ORDER BY Max(Amount) DESC This is the best I have achieved so far. This gives the CusID of each user with the maximum bid and it is ordered ascending. But I need to get the BidTime for each result as well. When I try to put the BidTime in to the query: SELECT CusID, Max(Amount), BidTime FROM Bid WHERE SellID = 10 GROUP BY CusID ORDER BY Max(Amount) DESC I am told that "Column 'Bid.BidTime' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause." Thus I tried: SELECT CusID, Max(Amount), BidTime FROM Bid WHERE SellID = 10 GROUP BY CusID, BidTime ORDER BY Max(Amount) DESC But this returns all the rows. No distinction. Any suggestions on solving this issue?

  Read the article

• Use cellular emulator with a REAL WinMo device?

  - by Ranhiru

  I don't whether this is even possible which is obviously why I am asking this question :) Is it in any way possible to leverage functionality the Cellular Emulator on a REAL PHYSICAL device?? :) So when I test it on my device, I really do not have to send real SMS(s) to test my MessageInteceptor. On a sidenote, why does MessageInteceptor fails after several messages to intercept messages?? :( Thanx a lot in advance :)

  Read the article

• Add new row in a databound form with a Oracle Sequence as the primary key

  - by Ranhiru

  I am connecting C# with Oracle 11g. I have a DataTable which i fill using an Oracle Data Adapter. OracleDataAdapter da; DataTable dt = new DataTable(); da = new OracleDataAdapter("SELECT * FROM Author", con); da.Fill(dt); I have few text boxes that I have databound to various rows in the data table. txtAuthorID.DataBindings.Add("Text", dt, "AUTHORID"); txtFirstName.DataBindings.Add("Text", dt, "FIRSTNAME"); txtLastName.DataBindings.Add("Text", dt, "LASTNAME"); txtAddress.DataBindings.Add("Text", dt, "ADDRESS"); txtTelephone.DataBindings.Add("Text", dt, "TELEPHONE"); txtEmailAddress.DataBindings.Add("Text", dt, "EMAIL"); I also have a DataGridView below the Text Boxes, showing the contents of the DataTable. dgvAuthor.DataSource = dt; Now when I want to add a new row, i do bm.AddNew(); where bm is defined in Form_Load as BindingManagerBase bm; bm = this.BindingContext[dt]; And when the save button is clicked after all the information is entered and validated, i do this.BindingContext[dt].EndCurrentEdit(); try { da.Update(dt); } catch (Exception ex) { MessageBox.Show(ex.Message); } However the problem comes where when I usually enter a row to the database (using SQL Plus) , I use a my_pk_sequence.nextval for the primary key. But how do i specify that when i add a new row in this method? I catch this exception ORA-01400: cannot insert NULL into ("SYSMAN".AUTHOR.AUTHORID") which is obvious because nothing was specified for the primary key. How do get around this? Thanx a lot in advance :)

  Read the article

• Can i override an abstract method written in a parent class, with a different name in a child class?

  - by Ranhiru

  abstract class SettingSaver { public abstract void add(string Name, string Value); public abstract void remove(string SettingName); } class XMLSettings : SettingSaver { public override void add(string Name, string Value) { throw new NotImplementedException(); } public override void remove(string SettingName) { throw new NotImplementedException(); } } Is there anyway that I can change the name of the add function in XMLSettings class to addSetting but make sure it overrides the add function in the SettingSaver? I know it should be definitely overridden in derived classes but just want to know whether I can use a different name :) Thanx in advance :D

  Read the article

• AES-XTS implementation in C#

  - by Ranhiru

  Is there any implementation of AES-XTS written in C# available in the Internet? Bouncy Castle disappointed me :( I took the source codes of TrueCrypt and FreeOTFE but they are written in C which is very hard for me to understand... Anyone?

  Read the article

• Getting started on a stream interface driver

  - by Ranhiru

  I want to build a stream interface driver for testing purposes but I am completely lost. I don't know which IDE to use VS2008 or Platform Builder. Platform Builder is whopping 20GB to download :( Can anyone guide me on how i create the .dll file and include XXX_Open, XXX_Close, XXX_Write, XXX_Read in the dll file? Should i write the .dll file in C++ or can i write it in C#? Please guide me through the basics :) Thanx a lot :)

  Read the article

• How do make my encryption algorithm encrypt more than 128 bits?

  - by Ranhiru

  OK, now I have coded for an implementation of AES-128 :) It is working fine. It takes in 128 bits, encrypts and returns 128 bits So how do i enhance my function so that it can handle more than 128 bits? How do i make the encryption algorithm handle larger strings? Can the same algorithm be used to encrypt files? :) The function definition is public byte[] Cipher(byte[] input) { }

  Read the article

• Are there any programming related diseases?

  - by Ranhiru

  When you play Tennis, you have the risk of getting tennis elbow... In the sea, you can get sea-sick... Are there any programmer/programming related sicknesses out there? Apart from carpal tunnel syndrome which happens from excessive typing, back pains and eye strains from sitting in one place and never moving your body/eyes. are there any phobias, disorders etc??

  Read the article

• Are these two functions the same?

  - by Ranhiru

  There is a function in the AES algorithm, to multiply a byte by 2 in Galois Field. This is the function given in a website private static byte gfmultby02(byte b) { if (b < 0x80) return (byte)(int)(b <<1); else return (byte)( (int)(b << 1) ^ (int)(0x1b) ); } This is the function i wrote. private static byte MulGF2(byte x) { if (x < 0x80) return (byte)(x << 1); else { return (byte)((x << 1) ^ 0x1b); } } What i need to know is, given any byte whether this will perform in the same manner. Actually I am worried about the extra conversion of to int and then again to byte. So far I have tested and it looks fine. Does the extra cast to int and then to byte make a difference?

  Read the article

• Start developing a database application using Oracle + Net Beans

  - by Ranhiru

  I have thought of creating my first database application for one of my projects using Oracle and Java. I have chosen Netbeans as my development environment. I have a few questions to getting started. Please bare with me as I'm a complete beginner to Oracle + Netbeans This will be a data intensive (yet still for a college project) database application. I do not need 1000 user concurrency or any other very advanced features but basic stuff such as triggers, stored procedures etc. Will the 11g "Express" (XE) suffice for my requirements? Do i need any Java to Oracle bridge (database connectivity driver eg. ODBC etc) for Netbeans to connect to the oracle database? If yes, what are they? Does Netbeans support Oracle databases natively? Any easy to follow guide on how do i connect to the database and insert/retrieve/display data on a J2SE application? (I know that i should Google this but if there's any guide previously followed by anyone and is considered easy, it would be greatly appreciated.)

  Read the article

1