Search Results

Search found 12472 results on 499 pages for 'remote debugging'.

Page 1/499 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Simultaneous remote connections

  - by user3215

  Is there any package for Ubuntu which allows me to connect to remote computer without disturbing or terminating others who have already connected to that server or who are accessing the computer directly?. I remember I did this in Windows Server 2003 installing Terminal Server when I was doing my course which allowed multiple clients to connect to the server simultaneously with no disturbance to clients and even direct access to server. Is there any package like this for Ubuntu desktops?

  Read the article

• remote desktop: the app on the remote machine is confusing the controller's hostname with its own hostname

  - by David Dai

  I have 2 machines A, B, both run Windows OS. A is my work machine, B is a server on which I have already installed SQLServer. Now I want to install another software on B which runs on top of the SQLServer. I remote connect to B from A. Then on the remote desktop, I start the installer, along the installation process, there's a step where I can configure which server to connect to. normally B's hostname is entered automatically to the hostname field. The issue I'm having is, when I get to that step, A's hostname is entered automatically instead of B's, and even if I manually correct it to 'localhost' or '127.0.0.1' or B's hostname, the installer still cannot connect to B's service as if it still try to connect to A. Theoretically, how does this happen? how is this possible?

  Read the article

• Ask the Readers: How Do You Remote Desktop Access Distant Computers?

  - by Jason Fitzpatrick

  You’re at a computer at point A, but the computer you want to interact with is at point B, and the only thing connecting you is a series of network switches and cabling. How do you comfortably control the remote computer? While there are a variety of ways to control a computer from afar, sometimes there’s just no good substitute for accessing the user interface as if you were sitting at the computer–a feat made possibly by remote desktop software. This week we want to hear about both your favorite remote desktop tool and your best tips for getting the most out of a remote desktop session–from banishing lag to improving mouse-cursor tracking, any tips are fair game. Sound off in the comments below with your remote desktop tips and then check back in on Friday for the What You Said roundup. Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For? HTG Explains: What is DNS?

  Read the article

• How to find which w3wp.exe to attach when debugging your SharePiont2010 project

  - by ybbest

  When debugging SharePoint2010 project, you need to attach w3wp.exe process, however there are often quite a few of them and it is very hard to figure out which one to attach. Today, I will show you how to find out which process to attach using a tool called process explorer. 1. Download the process explorer and run it after you download it. 2. Find the w3wp.exe processes under wininit.exe right-click the columns header and click Select Columns. 3. Include Command Line under Process Image. 4. Now you can see your IIS site name next to w3wp.exe, in my case I’d like to attach the “SharePoint – BenDev80″.You can see the PID of the process is 2920. 5. From the above process you know the process ID you’d like to attach is 2920, you can then go ahead to attach the process from Visual Studio.

  Read the article

• Remote assistance from Remote Desktop sessions: unable to control

  - by syneticon-dj

  Since Remote Control (aka Session Shadowing) is gone for good in Server 2012 Remote Desktop Session hosts, I am looking for a replacement to support users in a cross-domain environment. Since Remote Assistance is supposed to work for Remote Desktop Sessions as well, I tried leveraging that for support purposes by enabling unsolicited remote assistance for all Remote Desktop Session Hosts via Group Policy. All seems to be working well except that the "expert" seems to be unable to actually excercise any mouse or keyboard control when the remote assistance session has been initiated from a Remote Desktop session itself. Mouse clicks and keyboard strokes from the "expert" session (Server 2012) seem to simply be ignored even after the assisted user has acknowledged the request for control. I would like to see this working through RD sessions for the support staff due to a number of reasons: not every support agent would have the appropriate client system version to support users on a specific terminal server (e.g. an agent might have a Windows Vista or Windows 7 station and thus be unable to offer assistance to users on Server 2012 RDSHs) a support agent would not necessarily have a station which is a member of the specific destination domain (mainly due to the reason that more than a single domain's users are supported) what am I missing?

  Read the article

• Install remote desktop session host remotely

  - by Jorge

  I've removed the remote desktop host role from one of my Azue VM, so I can't RDP into it. I have tried to recreate the endpoints and even the VM with no luck. I can't either access remotely with Server Manager; getting this error: The client cannot connect to the destination specified in the request. Verify that the services on the destination is running" I cannot connect remotely to the registry Make sure this computer is on the network, has remote administration enabled, and that both computers are running the remote registry service PsPing tells me The remote computer refuses the network connection Which workaround can I follow to solve this?

  Read the article

• How to connect to Windows Server 2008 Remote Desktop with Network Level Authentication Required

  - by Lobo

  I have an Ubuntu 11.10 and I want to connect via remote desktop to a Windows Server 2008 R2. In the properties of remote desktop connection to Windows Server 2008, is set to "safer". Specifically, the selected option is "Allow connections only from computers running Remote Desktop with Network Level Authentication." In my Ubuntu, I used Remmina to connect to Windows Server 2008. Remmina can not connect to a Windows Server 2008 with the option "Network Level Authentication" (shown in the previous paragraph). The error message I Remmina returns is as follows: "Disable the connection to the server RPD: IPWINDOWSSERVER2008" How or what program I can connect by remote desktop to a Windows Server 2008 you have selected the option "Network Level Authentication"? Thanks for the help, Greetings! PD: Excuse for my English.

  Read the article

• Best VNC client for remote desktop assistance?

  - by e.m.fields

  Poll on best VNC / remote desktop software for assisting others on Windows/Mac machines from Ubuntu? I've heard good things about TeamViewer and Fog Creek Copilot, but I'm wondering if the included GNOME Vinaigre VNC client is good enough for this. To specify, I'm looking for best option based on: SIMPLEST ease-of-use for client to download/use on their end. See #1. Works cross-platform I am able to control client's mouse and/or keyboard from remote machine.

  Read the article

• Forcing Remote machine to serve RDP (or similar) session

  - by sMaN

  Due to a Dell/Nvidia design flaw in the Dell Inspiron 1420 series, my laptop no longer shows a display. I am looking for a solution to view it remotely. I have used it via RDP in the past (not for a year though) however for what ever reason I can no longer RDP, it could have been disabled some how. However, I'm on the same LAN, I can ping it, and know its login creditials. Is there a way I can hack into it remotely to force it to serve a RDP session or an alternative? Please bear in mind my only view I could have to its interface is via a remote session. Its running Windows 7 Pro

  Read the article

• Please recommend a free stealth remote access solution for internal network

  - by Nathaniel_613

  Hi, I need to have ability to stealthfully access, view, and control a few dozen PC's on my company's network. I would need a control panel window, so I can instantly connect to any of the users. Please recommend a secure solution, that will not make us vulnerable to viruses and hackers. All of the PC's have dynamic IP addresses, so I may have to use the DNS name or have a solution that uses web. Thank you very much, Nathaniel.

  Read the article

• What free Remote Desktop (server) solutions are there?

  - by Tao

  I know Ubuntu comes with a "Remote Desktop" option that appears to be a straightforward VNC server, and I'm trying to understand the alternatives. Here are the possibilities I've heard about so far: VNC VNC + SSH Tunnelling NX Server, free edition FreeNX NeatX X2Go X11 Forwarding over SSH xrdp I'm coming at this from a Windows user's perspective: To the best of my experience, RDP (aka Terminal Services) is a reasonably secure (barring mitm/server spoofing), efficient desktop sharing protocol with well-supported clients, that can be exposed to the internet when necessary without major fears of intrusion. To the best of my knowledge straight VNC is none of those things, which is where I get confused - why wouldn't a better desktop sharing technology be developed or used in the open-source world? I know VNC can be wrapped with SSH, but that seems beyond the reach of a casual user. X11 forwarding over SSH may be more or less efficient, I have no idea, but is definitely even more complicated, and doesn't (as far as I know) give you access to already-running stuff (no desktop sharing as such, just remote application running). So, I'd like any feedback/preferences amongst these or any other "Free" desktop sharing options, using these criteria and/or any others: Security (esp. for access across internet) Efficiency (bandwidth usage, responsiveness, etc) Free-ness, as in Speech (not sure where RDP or FreeNX lie for this) Free-ness, as in Beer (are there any commercial solutions with usable dependable free offerings?) Ease of use (server and client side) Cross-OS Client availability Cross-OS Server availability Support for independent sessions and shared (and/or "Console") sessions Ongoing support/maintenance/development Thanks!

  Read the article

• I need help debugging apache with gdb (no debugging symbols found)

  - by blockhead

  I'm trying to debug a segfault in PHP/Apache running on RHEL4. This is a production server, so I'm trying to install a separate copy of apache and php, and run apache through gdb. When I load httpd through gdb and then do run -X, I get the error (no debugging symbols found)...Error while reading shared library symbols: Dwarf Error: Cannot handle DW_FORM_strp in DWARF reader. The Apache manual says something about setting EXTRA_CFLAGS to "-g", and i've tried configuring with --enable-maintainer-mode, but I don't seem to be getting far.

  Read the article

• Oracle WebCenter Portlet Debugging

  - by Alexander Rudat

  IntroductionThis article describes how to debug a portlets that is already deployed to WebLogic server using Oracle JDeveloper 11g.OverviewThese a Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} re the basic steps involved in remote debugging an WebCenter portlets deployed in WebLogic:Configuration of the WebLogic to support remote debuggingConfiguration of the portlet project in JDeveloperActual debugging of the portletConfiguration of the WebLogicTo start the WebLogic server in debugging mode, there are a couple of configuration changes that need to be done to the WebLogic domain where the portlet is deployed.First we need to edit JVM options of the WebLogic server startup script where the portlet is deployed. Normally the startManagedWebLogic.cmd is used to start this managed server.This startup script is located in the %MIDDLEWARE_HOME%\user_projects\domains\<domain_name>\bin  directory, where %MIDDLEWARE_HOME% is the installation directory of WebLogic.Add the following line before the set JAVA_OPTIONS= line:set REMOTE_DEBUG_JAVA_OPTIONS=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=4000,server=y,suspend=nChange the set JAVA_OPTIONS= line to read like the one below:set JAVA_OPTIONS=%SAVE_JAVA_OPTIONS% %ADF_JAVA_OPTIONS% %REMOTE_DEBUG_JAVA_OPTIONS%After this changes save the startup script and start the managed server and be sure that you have access to the admin console (for example http://localhost:7001/console).Finally we need to check, that HTTP tunneling is enabled on the managed server. To do this, login to the admin console, select the managed server and select the Protocols tab.Be sure that Enable Tunneling is selected.Configuration of the portletFirst let's create a new run configuration specifically for remote debugging. Double-click the project where you portlets are developed.In the Project Properties select the Run/Debug/Profile page. Click New... to create a new run configuration. In the Create Run Configuration  dialog enter Remote Debugging for the name of the run configuration. Leave the Copy Settings From selection to Default and click OK to create the new run configuration.Once the Remote Debug run configuration is created, select it in the Run Configurations and click Edit... to bring up the Edit Run Configuration dialog. In the Launch Settings page click on the Remote Debugging checkbox to enable remote debugging for this run configuration.Finally select the Remote page and verify that the Protocol is set to Attach to JPDA and the port matches the port specified earlier when configuring WebLogic for remote debugging (defaults to 4000).Actual debugging of the portletTo start the remote debugging profile, right-click on your portlet project and select Start Remote Debugger.Now JDeveloper is asking the host and port specification. If you WebLogic server is installed locally, you can apply the default settings: Set a breakpoint at you java code and run the portal (WebCenter) application, where the portlet is used.That's all, now you are able to debug the portlet java code. Hope you will find all errors in your portlet :-)Referenceshttp://www.oracle.com/technology/products/jdev/howtos/weblogic/remotedebugwls.html

  Read the article

• Remote Desktop Connection Only Works One Way

  - by advocate

  I can't get my desktop to connect to my laptop through remote desktop connection. Unfortunately I can only get my laptop to connect to my desktop (quite useless). Desktop: Windows 7 Ultimate 64 Bit SP1 Windows firewall is off for all 3 profiles (domain / private / public) Remote desktop connection is installed and set to allow all connections Under running services is: Running Remote Desktop Configuration Running Remote Desktop Services Running Remote Desktop Services UserMode Port Redirector Running Remote Procedure Call (RPC) Stopped Remote Access Auto Connection Manager Stopped Remote Access Connection Manager Stopped Remote Procedure Call (RPC) Locator Stopped Remote Registry Stopped Routing and Remote Access Stopped Windows Remote Management (WS-Management) Laptop: Windows 7 Home Premium 64 Bit SP1 Windows firewall is off for all3 profiles (domain / private / public) Remote desktop connection is installed and set to 'Allow Remote Assistance connections to this computer' Under running services is: Running Remote Procedure Call (RPC) Stopped Remote Access Auto Connection Manager Stopped Remote Access Connection Manager Stopped Remote Desktop Configuration Stopped Remote Desktop Services Stopped Remote Procedure Call (RPC) Locator Stopped Remote Registry Stopped Routing and Remote Access Stopped Windows Remote Management (WS-Management) It should be noted that the Laptop that I'm trying to connect to is an Alienware and might be running some wonky Dell settings. Also, the settings are slightly different for remote desktop connection as it's a Home edition of Windows and not Ultimate like my desktop. Finally, both computers are on the same Homegroup so that RDC can be accessed by one click through the network section of Windows. They're also on the same workgroup, MSHOME, just to see if that helps.

  Read the article

• Is it okay to call exception-triggered debugging "post-mortem debugging"?

  - by cool-RR

  I heard the term "post-mortem debugging", and Wikipedia says it's debugging done after the program has crashed. I often debug Python apps using a debugger that stops execution once an important-enough exception has been raised. Then I can use the debug probe to investigate. Does this count as "post-mortem debugging"? Because the program doesn't really crash. EDIT: If the answer is no, then what name would you use for the kind of debugging that I described?

  Read the article

• Will logging debugging incur a performance hit if I don't turn debugging on?

  - by romandas

  On a Cisco device, I know that enabling debugging can incur a performance hit since debugging has such a high priority on the CPU. I know that to log debugging, you have to set logging up to the debugging level (logging buffered 4096 debugging, for example) and also enable debugging on some feature. Does configuring the logging debugging incur the performance hit even if you don't enable debugging on some feature, or would it be safe (assuming you want and can handle all the logging events via syslog) to configure 'logging buffered 4096 debugging' to have maximum logging available if/when someone uses debug?

  Read the article

• How to use remote microphone on Remote Desktop

  - by user553702

  I wish to connect to a remote Windows 7 PC that has a microphone, and use that local microphone (on the destination PC) in recording applications. Unfortunately whenever I connect on Remote Desktop, the remote PC's local microphones become hidden and disabled. Remote Desktop seems to force using the source computer's microphone with redirection, without an option to use the remote PC's microphone Isn't there a way to enable using the remote PC's microphone? I don't get why this should be so hard.

  Read the article

• Remote Assistance working but not Remote Desktop - both machines are XP Pro

  - by Craig Johnston

  I have Remote Assistance working but not Remote Desktop. XP Firewall has exceptions for both Remote Assistance and Remote Desktop. Remote Desktop is allowed in System Properties - Remote. What could be the problem?

  Read the article

• how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

  - by Oleksandr Dudchenko

  I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

  Read the article

• NX/SSH remote access with Remmina

  - by Niklas

  After many days and a lot of frustration, I managed to get freenx to work on my home server. I can connect to it with nomachine's linux client, but I want to use Remmina for this purpose. The problem is that I don't exactly know how to connect to a NX-server with the program. In the connection dialog, I've chosen SSH as the protocol, and I've correctly added the IP and port. Under "SSH Authentication" I've added my user name on the server, and I choose "identity file" and selected the ssh-key I generated (which works with nxclient). (When am I supposed to provide my password for the user on the server?) When I try to connect I get the message: SSH public key authentication failed: Public key file doesn't exist Why do I get this message? How shall I proceed correctly to get the authentication working? Thank you for your time!

  Read the article

• How to enable true remote login

  - by Scán

  I don't quite know how these things are called, so a search did not product any help. I've got two computers, a desktop and a netbook. The netbook is really weak, and there's hardly any fun doing work with it, especially after ubuntu software swallows so much cpu power for nothing. But my desktop is good, but uncomfortably positioned. So I know you can use any linux system as a server to give logins. I want to be able to login and work on my desktop, from my netbook. No VNC, no SSH, full X-server, I want to be able to choose "Login on Desktop" in my login menu on the netbook and have everything as if I was there. I hope I could make my point. Is it possible in a local network? And if so, how can I easily set it up?

  Read the article

• What are some good debugging techniques [closed]

  - by Brad Bruce

  I frequently run into situations where I'm working with other programmers, helping out with debugging issues. Over the years, I've acquired my own techniques for logically breaking down a problem and tracing through it. I see several others who are great at writing programs, but freeze up when debugging. Are there any good resources I can point people to that describe some good debugging techniques?

  Read the article

• Remote debugging in Windows Embedded

  - by Ben Schoepke

  Hi, I'm moving from Windows CE 6 to Windows Embedded Standard 7 for a project and am wondering how remote debugging of .Net apps works with Windows Embedded target devices. In CE with VS2008 and ActiveSync (USB), I can hit F5 and my app is automatically deployed to the target device and executed so I can step through my breakpoints just like I would if I were debugging locally. Is there an equivalent remote debugging solution for Windows Embedded debugging? A quick glance through the Visual Studio "Remote Debugger" documentation makes the whole thing seem a lot clunkier/less integrated. Is there an easy way to debug applications on target devices running Windows Embedded like I would with CE? Thanks, Ben

  Read the article

• Automatic deployment of VNC server to remote terminals (PC's) via Remote Desktop

  - by BradyKelly

  We have several remote, unmanned terminals where I require a VNC server, as using Remote Desktop prevents others using the terminals. Often the connection to one of these is extremely slow, and manually using Remote Desktop to perform the VNC installation is painstaking. What I would like to do is build a package that I could copy onto the remote terminal using Remote Desktop, and then have the package executed to install and configure VNC when the terminal restarts, as they all automatically restart nightly. The terminals are all running Windows XP. Also, out of the many VNC variants out there, which would suit this application?

  Read the article

• can't Remote desktop to windows XP, blaming the server side

  - by Jin

  After rebooting my work PC (windows XP sp3) this Wednesday (thank to Microsoft Tuesday), I found that I can't remote desktop to my work PC from home (with VPN to company). I have been remote-desktop to work for years and I am really surprised since connectivity is not the problem, so I brought up wireshark to sniff the packets. I can see after TCP handshake, client sent X.224 Connection Request 03 00 00 13 0e e0 00 00 00 00 00 01 00 08 00 03 00 00 00 server sent X.224 Connection Confirm. 03 00 00 0b 06 d0 00 00 12 34 00 According to "MS-RDPBCGR", the official spec on RDP, the server should include Negotiation Response in the "Connection Confirm" message but it didn't. It's empty. I googled a lot but didn't find any clue on why server did that. By the way, I used the same remote desktop client and can connect to other windows XP PC. Here are a couple of pieces of information that may help to give a clue: Since TCP handshake (server port being 3389), I believe the svchost service is actually running. going to control panel -- system window, --- "Remote" tab, the remote desktop is indeeded checked and it states that my username is allowed. according to the packet capture, client didn't even get a chance to tell server what user was trying to logon. Yes, the progress bar showed up a few seconds and then it went back to the "Remote desktop Connection" window again. Searched "windowsupdate.log", didn't find any appearance of the word "remote".

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >