Search Results

Search found 1339 results on 54 pages for 'rob farley'.

Page 1/54 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • 2011 PASS Board Applicants: Rob Farley

    - by andyleonard
    Introduction I am interviewing 2011 PASS Board Nominee Applicants. As listed on the PASS Board Elections site the applicants are: Rob Farley Geoff Hiten Adam Jorgensen Denise McInerney Sri Sridharan Kendal Van Dyke I'm asking everyone the same questions and blogging the responses in the order received. Rob Farley is first up: Interview With Rob Farley 1. What's your day job? I run LobsterPot Solutions out of Adelaide, Australia. We're a SQL & BI consultancy, and were the first Microsoft Partner...(read more)

    Read the article

  • SQLPeople Interviews - Jamie Thomson and Rob Farley

    - by andyleonard
    Introduction Late last year I announced an exciting new endeavor called SQLPeople . At the end of 2010 I announced the 2010 SQLPeople Person of the Year . Interviews I'm pleased to announce the first two interviews have been posted. They are with my friend and co-SSIS-professional Jamie Thomson and Rob Farley , someone I had the pleasure of meeting in person at the PASS Summit 2010. I plan to post two or three interviews each week for the forseeable future. Conclusion SQLPeople is just one of the...(read more)

    Read the article

  • @CodeStock 2012 Review: Rob Gillen ( @argodev ) - Anatomy of a Buffer Overflow Attack

    Anatomy of a Buffer Overflow AttackSpeaker: Rob GillenTwitter: @argodevBlog: rob.gillenfamily.net Honestly, this talk was over my head due to my lack of knowledge of low level programming, and I think that most of the other attendees would agree. However I did get the basic concepts that we was trying to get across. Fortunately most high level programming languages handle most of the low level concerns regarding preventing buffer overflow attacks. What I got from this talk was to validate all input data from external sources.

    Read the article

  • @CodeStock 2012 Review: Rob Gillen ( @argodev ) - Anatomy of a Buffer Overflow Attack

    Anatomy of a Buffer Overflow AttackSpeaker: Rob GillenTwitter: @argodevBlog: rob.gillenfamily.net Honestly, this talk was over my head due to my lack of knowledge of low level programming, and I think that most of the other attendees would agree. However I did get the basic concepts that we was trying to get across. Fortunately most high level programming languages handle most of the low level concerns regarding preventing buffer overflow attacks. What I got from this talk was to validate all input data from external sources.

    Read the article

  • Rob Blackwell on interoperability and Azure

    - by Eric Nelson
    At QCon in March we had a sample Azure application implemented in both Java and Ruby to demonstrate that the Windows Azure Platform is not just about .NET. The following is an interesting interview with Rob Blackwell, the R&D director of the partner who implemented the application. UK Interoperability Team Interviews Rob Blackwell, R&D Director at Active Web Solutions. Is Microsoft taking interoperability seriously? Yes. In the past, I think Microsoft has, quite rightly come in for criticism, but architects and developers should look at this again. The Interoperability Bridges site (http://www.interoperabilitybridges.com/ ) shows a wide range of projects that allow interoperability from Java, Ruby and PHP for example. The Windows Azure platform has been architected with interoperable APIs in mind. It's straightforward to access the various storage facilities from just about any language or platform. Azure compute is capable of running more than just C# applications! Why is interoperability important to you? My company provides consultancy and bespoke development services. We're a Microsoft Gold Partner, but we live in the real world where companies have a mix of technologies provided by a variety of vendors. When developing an enterprise software solution, you rarely have a completely blank canvas. We often see integration scenarios where we need to exchange data with legacy systems. It's not unusual to see modern Silverlight applications being built on top of Java or Mainframe based back ends. Could you give us some examples of where interoperability has been important for your projects? We developed an innovative Sea Safety system for the RNLI Lifeboats here in the UK. Commercial Fishing is one of the most dangerous professions and we helped developed the MOB Guardian System which uses satellite technology and man overboard devices to raise the alarm when a fisherman gets into trouble. The solution is implemented in .NET running on Windows, but without interoperable standards, it would have been impossible to communicate with the satellite gateway technology. For more information, please see the case study: http://www.microsoft.com/casestudies/Case_Study_Detail.aspx?CaseStudyID=4000005892 More recently, we were asked to build a web site to accompany the QCon 2010 conference in London to help demonstrate and promote interoperability. We built the site using Java and Restlet and hosted it in Windows Azure Compute. The site accepts feedback from visitors and all the data is stored in Windows Azure Storage. We also ported the application to Ruby on Rails for demonstration purposes. Visitors to the stand were surprised that this was even possible. Why should Java developers be interested in Windows Azure? Windows Azure Storage consists of Blobs, Queues and Tables. The storage is scalable, durable, secure and cost-effective. Using the WindowsAzure4j library, it's easy to use, and takes just a few lines of code. If you are writing an application with large data storage requirements, or you want an offsite backup, it makes a lot of sense. Running Java applications in Azure Compute is straightforward with tools like the Tomcat Solution Accelerator (http://code.msdn.microsoft.com/winazuretomcat )and AzureRunMe (http://azurerunme.codeplex.com/ ). The Windows Azure AppFabric Service Bus can also be used to connect heterogeneous systems running on different networks and in different data centres. How can The Service Bus be considered an interoperability solution? I think that the Windows Azure AppFabric Service Bus is one of Microsoft’s best kept secrets. Think of it as “a globally scalable application plumbing kit in the sky”. If you have used Enterprise Service Buses before, you’ll be familiar with the concept. Applications can connect to the service bus to securely exchange data – these can be point to point or multicast links. With the AppFabric Service Bus, the applications can exist anywhere that has access to the Internet and the connections can traverse firewalls. This makes it easy to extend or scale your application or reach out to other networks and technologies. For example, let’s say you have a SQL Server database running on premises and you want to expose the data to a Java application running in the cloud. You could set up a point to point Service Bus connection and use JDBC. Traditionally this would have been difficult or impossible without punching holes in firewalls and compromising security. Rob Blackwell is R&D Director at Active Web Solutions, www.aws.net , a Microsoft Gold Partner specialising in leading edge software solutions. He is an occasional writer and conference speaker and blogs at www.robblackwell.org.uk Related Links: UK Azure Online Community – join today. UK Windows Azure Site Start working with Windows Azure

    Read the article

  • NDC2010: Rob Conery I cant hear you, there is an ORM in my ear

    In this session Rob Conery tried to show of the new Shiny toy NoSQL in as many forms as possible, discussing the pros and and some cons. He based much of the talk on his experiences with building TekPub and the requirements they had around that. He tried to illustrate that this wasnt a magical [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Edinburgh this Thurs (25th) - Rob Carrol talks about how to build a high performance, scalable repor

    - by tonyrogerson
    Scottish Area SQL Server User Group Meeting, Edinburgh - Thursday 25th March An evening of SQL Server 2008 Reporting Services Scalability and Performance with Rob Carrol, see how to build a high performance, scalable reporting platform and the tuning techniques required to ensure that report performance remains optimal as your platform grows. Pizza and drinks will be provided! Register at http://www.sqlserverfaq.com/events/221/SQL-Server-2008-Reporting-Services-Scalability-and-Performance.aspx...(read more)

    Read the article

  • Linq to SQL and concurrency with Rob Conery repository pattern

    - by David Hall
    I have implemented a DAL using Rob Conery's spin on the repository pattern (from the MVC Storefront project) where I map database objects to domain objects using Linq and use Linq to SQL to actually get the data. This is all working wonderfully giving me the full control over the shape of my domain objects that I want, but I have hit a problem with concurrency that I thought I'd ask about here. I have concurrency working but the solution feels like it might be wrong (just one of those gitchy feelings). The basic pattern is: private MyDataContext _datacontext private Table _tasks; public Repository(MyDataContext datacontext) { _dataContext = datacontext; } public void GetTasks() { _tasks = from t in _dataContext.Tasks; return from t in _tasks select new Domain.Task { Name = t.Name, Id = t.TaskId, Description = t.Description }; } public void SaveTask(Domain.Task task) { Task dbTask = null; // Logic for new tasks omitted... dbTask = (from t in _tasks where t.TaskId == task.Id select t).SingleOrDefault(); dbTask.Description = task.Description, dbTask.Name = task.Name, _dataContext.SubmitChanges(); } So with that implementation I've lost concurrency tracking because of the mapping to the domain task. I get it back by storing the private Table which is my datacontext list of tasks at the time of getting the original task. I then update the tasks from this stored Table and save what I've updated This is working - I get change conflict exceptions raised when there are concurrency violations, just as I want. However, it just screams to me that I've missed a trick. Is there a better way of doing this? I've looked at the .Attach method on the datacontext but that appears to require storing the original version in a similar way to what I'm already doing. I also know that I could avoid all this by doing away with the domain objects and letting the Linq to SQL generated objects all the way up my stack - but I dislike that just as much as I dislike the way I'm handling concurrency.

    Read the article

  • An MCM exam, Rob? Really?

    - by Rob Farley
    I took the SQL 2008 MCM Knowledge exam while in Seattle for the PASS Summit ten days ago. I wasn’t planning to do it, but I got persuaded to try. I was meaning to write this post to explain myself before the result came out, but it seems I didn’t get typing quickly enough. Those of you who know me will know I’m a big fan of certification, to a point. I’ve been involved with Microsoft Learning to help create exams. I’ve kept my certifications current since I first took an exam back in 1998, sitting many in beta, across quite a variety of topics. I’ve probably become quite good at them – I know I’ve definitely passed some that I really should’ve failed. I’ve also written that I don’t think exams are worth studying for. (That’s probably not entirely true, but it depends on your motivation. If you’re doing learning, I would encourage you to focus on what you need to know to do your job better. That will help you pass an exam – but the two skills are very different. I can coach someone on how to pass an exam, but that’s a different kind of teaching when compared to coaching someone about how to do a job. For example, the real world includes a lot of “it depends”, where you develop a feel for what the influencing factors might be. In an exam, its better to be able to know some of the “Don’t use this technology if XYZ is true” concepts better.) As for the Microsoft Certified Master certification… I’m not opposed to the idea of having the MCM (or in the future, MCSM) cert. But the barrier to entry feels quite high for me. When it was first introduced, the nearest testing centres to me were in Kuala Lumpur and Manila. Now there’s one in Perth, but that’s still a big effort. I know there are options in the US – such as one about an hour’s drive away from downtown Seattle, but it all just seems too hard. Plus, these exams are more expensive, and all up – I wasn’t sure I wanted to try them, particularly with the fact that I don’t like to study. I used to study for exams. It would drive my wife crazy. I’d have some exam scheduled for some time in the future (like the time I had two booked for two consecutive days at TechEd Australia 2005), and I’d make sure I was ready. Every waking moment would be spent pouring over exam material, and it wasn’t healthy. I got shaken out of that, though, when I ended up taking four exams in those two days in 2005 and passed them all. I also worked out that if I had a Second Shot available, then failing wasn’t a bad thing at all. Even without Second Shot, I’m much more okay about failing. But even just trying an MCM exam is a big effort. I wouldn’t want to fail one of them. Plus there’s the illusion to maintain. People have told me for a long time that I should just take the MCM exams – that I’d pass no problem. I’ve never been so sure. It was almost becoming a pride-point. Perhaps I should fail just to demonstrate that I can fail these things. Anyway – boB Taylor (@sqlboBT) persuaded me to try the SQL 2008 MCM Knowledge exam at the PASS Summit. They set up a testing centre in one of the room there, so it wasn’t out of my way at all. I had to squeeze it in between other commitments, and I certainly didn’t have time to even see what was on the syllabus, let alone study. In fact, I was so exhausted from the week that I fell asleep at least once (just for a moment though) during the actual exam. Perhaps the questions need more jokes, I’m not sure. I knew if I failed, then I might disappoint some people, but that I wouldn’t’ve spent a great deal of effort in trying to pass. On the other hand, if I did pass I’d then be under pressure to investigate the MCM Lab exam, which can be taken remotely (therefore, a much smaller amount of effort to make happen). In some ways, passing could end up just putting a bunch more pressure on me. Oh, and I did.

    Read the article

  • An MCM exam, Rob? Really?

    - by Rob Farley
    I took the SQL 2008 MCM Knowledge exam while in Seattle for the PASS Summit ten days ago. I wasn’t planning to do it, but I got persuaded to try. I was meaning to write this post to explain myself before the result came out, but it seems I didn’t get typing quickly enough. Those of you who know me will know I’m a big fan of certification, to a point. I’ve been involved with Microsoft Learning to help create exams. I’ve kept my certifications current since I first took an exam back in 1998, sitting many in beta, across quite a variety of topics. I’ve probably become quite good at them – I know I’ve definitely passed some that I really should’ve failed. I’ve also written that I don’t think exams are worth studying for. (That’s probably not entirely true, but it depends on your motivation. If you’re doing learning, I would encourage you to focus on what you need to know to do your job better. That will help you pass an exam – but the two skills are very different. I can coach someone on how to pass an exam, but that’s a different kind of teaching when compared to coaching someone about how to do a job. For example, the real world includes a lot of “it depends”, where you develop a feel for what the influencing factors might be. In an exam, its better to be able to know some of the “Don’t use this technology if XYZ is true” concepts better.) As for the Microsoft Certified Master certification… I’m not opposed to the idea of having the MCM (or in the future, MCSM) cert. But the barrier to entry feels quite high for me. When it was first introduced, the nearest testing centres to me were in Kuala Lumpur and Manila. Now there’s one in Perth, but that’s still a big effort. I know there are options in the US – such as one about an hour’s drive away from downtown Seattle, but it all just seems too hard. Plus, these exams are more expensive, and all up – I wasn’t sure I wanted to try them, particularly with the fact that I don’t like to study. I used to study for exams. It would drive my wife crazy. I’d have some exam scheduled for some time in the future (like the time I had two booked for two consecutive days at TechEd Australia 2005), and I’d make sure I was ready. Every waking moment would be spent pouring over exam material, and it wasn’t healthy. I got shaken out of that, though, when I ended up taking four exams in those two days in 2005 and passed them all. I also worked out that if I had a Second Shot available, then failing wasn’t a bad thing at all. Even without Second Shot, I’m much more okay about failing. But even just trying an MCM exam is a big effort. I wouldn’t want to fail one of them. Plus there’s the illusion to maintain. People have told me for a long time that I should just take the MCM exams – that I’d pass no problem. I’ve never been so sure. It was almost becoming a pride-point. Perhaps I should fail just to demonstrate that I can fail these things. Anyway – boB Taylor (@sqlboBT) persuaded me to try the SQL 2008 MCM Knowledge exam at the PASS Summit. They set up a testing centre in one of the room there, so it wasn’t out of my way at all. I had to squeeze it in between other commitments, and I certainly didn’t have time to even see what was on the syllabus, let alone study. In fact, I was so exhausted from the week that I fell asleep at least once (just for a moment though) during the actual exam. Perhaps the questions need more jokes, I’m not sure. I knew if I failed, then I might disappoint some people, but that I wouldn’t’ve spent a great deal of effort in trying to pass. On the other hand, if I did pass I’d then be under pressure to investigate the MCM Lab exam, which can be taken remotely (therefore, a much smaller amount of effort to make happen). In some ways, passing could end up just putting a bunch more pressure on me. Oh, and I did.

    Read the article

  • Asp.Net MVC - Rob Conery's LazyList - Count() or Count

    - by Adam
    I'm trying to create an html table for order logs for customers. A customer is defined as (I've left out a lot of stuff): public class Customer { public LazyList<Order> Orders { get; set; } } The LazyList is set when fetching a Customer: public Customer GetCustomer(int custID) { Customer c = ... c.Orders = new LazyList<Order>(_repository.GetOrders().ByOrderID(custID)); return c; } The order log model: public class OrderLogTableModel { public OrderLogTableModel(LazyList<Order> orders) { Orders = orders; Page = 0; PageSize = 25; } public LazyList<Order> Orders { get; set; } public int Page { get; set; } public int PageSize { get; set; } } and I pass in the customer.Orders after loading a customer. Now the log i'm trying to make, looks something like: <table> <tbody> <% int rowCount = ViewData.Model.Orders.Count(); int innerRows = rowCount - (ViewData.Model.Page * ViewData.Model.PageSize); foreach (Order order in ViewData.Model.Orders.OrderByDescending(x => x.StartDateTime) .Take(innerRows).OrderBy(x => x.StartDateTime) .Take(ViewData.Model.PageSize)) { %> <tr> <td> <%= order.ID %> </td> </tr> <% } %> </tbody> </table> Which works fine. But the problem is evaluating ViewData.Model.Orders.Count() literally takes about 10 minutes. I've tried with the ViewData.Model.Orders.Count property instead, and the results are the same - takes forever. I've also tried calling _repository.GetOrders().ByCustomerID(custID).Count() directly from the view and that executes perfectly within a few ms. Can anybody see any reason why using the LazyList to get a simple count would take so long? It seems like its trying to iterate through the list when getting a simple count.

    Read the article

  • PASS Summit Feedback

    - by Rob Farley
    PASS Feedback came in last week. I also saw my dentist for some fillings... At the PASS Summit this year, I delivered a couple of regular sessions and a Lightning Talk. People told me they enjoyed it, but when the rankings came out, they showed that I didn’t score particularly well. Brent Ozar was keen to discuss it with me. Brent: PASS speaker feedback is out. You did two sessions and a Lightning Talk. How did you go? Rob: Not so well actually, thanks for asking. Brent: Ha! Sorry. Of course you know that's why I wanted to discuss this with you. I was in one of your sessions at SQLBits in the UK a month before PASS, and I thought you rocked. You've got a really good and distinctive delivery style.  Then I noticed your talks were ranked in the bottom quarter of the Summit ratings and wanted to discuss it. Rob: Yeah, I know. You did ask me if we could do this...  I should explain – my presentation style is not the stereotypical IT conference one. I throw in jokes, and try to engage the audience thoroughly. I find many talks amazingly dry, and I guess I try to buck that trend. I also run training courses, and find that I get a lot of feedback from people thanking me for keeping things interesting. That said, I also get feedback criticising me for my style, and that’s basically what’s happened here. For the rest of this discussion, let’s focus on my talk about the Incredible Shrinking Execution Plan, which I considered to be my main talk. Brent: I thought that session title was the very best one at the entire Summit, and I had it on my recommended sessions list.  In four words, you managed to sum up the topic and your sense of humor.  I read that and immediately thought, "People need to be in this session," and then it didn't score well.  Tell me about your scores. Rob: The questions on the feedback form covered the usefulness of the information, the speaker’s presentation skills, their knowledge of the subject, how well the session was described, the amount of time allocated, and the quality of the presentation materials. Brent: Presentation materials? But you don’t do slides.  Did they rate your thong? Rob: No-one saw my flip-flops in this talk, Brent. I created a script in Management Studio, and published that afterwards, but I think people will have scored that question based on the lack of slides. I wasn’t expecting to do particularly well on that one. That was the only section that didn’t have 5/5 as the most popular score. Brent: See, that sucks, because cookbook-style scripts are often some of my favorites.  Adam Machanic's Service Broker workbench series helped me immensely when I was prepping for the MCM.  As an attendee, I'd rather have a commented script than a slide deck.  So how did you rank so low? Rob: When I look at the scores that you got (based on your blog post), you got very few scores below 3 – people that felt strong enough about your talk to post a negative score. In my scores, between 5% and 10% were below 3 (except on the question about whether I knew my stuff – I guess I came as knowledgeable). Brent: Wow – so quite a few people really didn’t like your talk then? Rob: Yeah. Mind you, based on the comments, some people really loved it. I’d like to think that there would be a certain portion of the room who may have rated the talk as one of the best of the conference. Some of my comments included “amazing!”, “Best presentation so far!”, “Wow, best session yet”, “fantastic” and “Outstanding!”. I think lots of talks can be “Great”, but not so many talks can be “Outstanding” without the word losing its meaning. One wrote “Pretty amazing presentation, considering it was completely extemporaneous.” Brent: Extemporaneous, eh? Rob: Yeah. I guess they don’t realise how much preparation goes into coming across as unprepared. In many ways it’s much easier to give a written speech than to deliver a presentation without slides as a prompt. Brent: That delivery style, the really relaxed, casual, college-professor approach was one of the things I really liked about your presentation at SQLbits.  As somebody who presents a lot, I "get" it - I know how hard it is to come off as relaxed and comfortable with your own material.  It's like improv done by jazz players and comedians - if you've never tried it, you don't realize how hard it is.  People also don't realize how hard it is to make a tough subject fun. Rob: Yeah well... There will be people writing comments on this post that say I wasn't trying to make the subject fun, and that I was making it all about me. Sometimes the style works, sometimes it doesn't. Most of the comments mentioned the fact that I tell jokes, some in a nice way, but some not so much (and it wasn't just a PASS thing - that's the mix of feedback I generally get). One comment at PASS was: “great stand up comedian - not what I'm looking for at pass”, and there were certainly a few that said “too many jokes”. I’m not trying to do stand-up – jokes are my way of engaging with the audience while I demonstrate some of the amazing things that the Query Optimizer can do if you write your queries the right way. Some people didn’t think it was technical enough, but I’ve also had some people tell me that the concepts I’m explaining are deep and profound. Brent: To me, that's a hallmark of a great explanation - when someone says, "But of course it has to work that way - how could it work any other way?  It seems so simple and logical."  Well, sure it does when it's explained correctly, but now pick up any number of thick SQL Server books and try to understand the Redundant Joins concept.  I guarantee it'll take more than 45 minutes. Rob: Some people in my audiences realise that, but definitely not everyone. There's only so much you can tell someone that something is profound. Generally it's something that they either have an epiphany on or not. I like to lull my audience into knowing what's going on, and do something that surprises them. Gain their trust, build a rapport, and then show them the deeper truth of what just happened. Brent: So you've learned your lesson about presentation scores, right?  From here on out, you're going to be dry, humorless, and all your presentations will consist of you reading bullet points off the screen. Rob: No Brent, I’m not. I'm also not going to suggest that most presentations at PASS are like that. No-one tries to present like that. There's a big space to occupy between what "dry and humourless" and me. My difference is to focus on the relationship I have with the crowd, rather than focussing on delivering the perfect session. I want to see people smiling and know they're relaxed. I think most presenters focus on the material, which is completely reasonable and safe. I remember once hearing someone talking about product creation. They talked about mediocrity. They said that one of the worst things that people can ever say about your product is that it’s “good”. What you want is for 10% of the world to love it enough to want to buy it. If 10% the world gave me a dollar, I’d have more money than I could ever use (assuming it wasn’t the SAME dollar they were giving me I guess). Brent: It's the Raving Fans theory.  It's better to have a small number of raving customers than a large number of almost-but-not-really customers who don't care that much about your product or service.  I know exactly how you feel - when I got survey feedback from my Quest video presentation when I was dressed up in a Richard Simmons costume, some of the attendees said I was unprofessional and distracting.  Some of the attendees couldn't get enough and Photoshopped all kinds of stuff into the screen captures.  On a whole, I probably didn't score that well, and I'm fine with that.  It sucks to look at the scores though - do those lower scores bother you? Rob: Of course they do. It hurts deeply. I open myself up and give presentations in a very personal way. All presenters do that, and we all feel the pain of negative feedback. I hate coming 146th & 162nd out of 185, but have to acknowledge that many sessions did worse still. Plus, once I feel the wounds have healed, I’ll be able to remember that there are people in the world that rave about my presentation style, and figure that people will hopefully talk about me. One day maybe those people that don’t like my presentation style will stay away and I might be able to score better. You don’t pay to hear country music if you prefer western... Lots of people find chili too spicy, but it’s still a popular food. Brent: But don’t you want to appeal to everyone? Rob: I do, but I don’t want to be lukewarm as in Revelation 3:16. I’d rather disgust and be discussed. Well, maybe not ‘disgust’, but I don’t want to conform. Conformity just isn’t the same any more. I’m not sure I’ve ever been one to do that. I try not to offend, but definitely like to be different. Brent: Count me among your raving fans, sir.  Where can we see you next? Rob: Considering I live in Adelaide in Australia, I’m not about to appear at anyone’s local SQL Saturday. I’m still trying to plan which events I’ll get to in 2011. I’ve submitted abstracts for TechEd North America, but won’t hold my breath. I’m also considering the SQLBits conferences in the UK in April, PASS in October, and I’m sure I’ll do some LiveMeeting presentations for user groups. Online, people download some of my recent SQLBits presentations at http://bit.ly/RFSarg and http://bit.ly/Simplification though. And they can download a 5-minute MP3 of my Lightning Talk at http://www.lobsterpot.com.au/files/Collation.mp3, in which I try to explain the idea behind collation, using thongs as an example. Brent: I was in the audience for http://bit.ly/RFSarg. That was a great presentation. Rob: Thanks, Brent. Now where’s my dollar?

    Read the article

  • How do I stop Python install on Mac OS X from putting things in my home directory?

    - by Rob
    Hi, I'm trying to install Python from source on my Mac. (OS X 10.6.2, Python-2.6.5.tar.bz2) I've done this before and it was easy, but for some reason, this time after ./configure, and make, the sudo make install puts things some things in my home directory instead of in /usr/local/... where I expect. The .py files are okay, but not the .so files... RobsMac Python-2.6.5 $ sudo make install [...] /usr/bin/install -c -m 644 ./Lib/anydbm.py /usr/local/lib/python2.6 /usr/bin/install -c -m 644 ./Lib/ast.py /usr/local/lib/python2.6 /usr/bin/install -c -m 644 ./Lib/asynchat.py /usr/local/lib/python2.6 [...] running build_scripts running install_lib creating /Users/rob/Library/Python creating /Users/rob/Library/Python/2.6 creating /Users/rob/Library/Python/2.6/site-packages copying build/lib.macosx-10.4-x86_64-2.6/_AE.so - /Users/rob/Library/ Python/2.6/site-packages copying build/lib.macosx-10.4-x86_64-2.6/_AH.so - /Users/rob/Library/ Python/2.6/site-packages copying build/lib.macosx-10.4-x86_64-2.6/_App.so - /Users/rob/Library/ Python/2.6/site-packages [...] Later, this causes imports that require those .so files to fail. For example... RobsMac Python-2.6.5 $ python Python 2.6.5 (r265:79063, Apr 28 2010, 13:40:18) [GCC 4.2.1 (Apple Inc. build 5646) (dot 1)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import zlib Traceback (most recent call last):     File "", line 1, in ImportError: No module named zlib Any ideas what is wrong? thanks, Rob

    Read the article

  • Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

    - by Rob
    I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

    Read the article

  • Collation errors in business

    - by Rob Farley
    At the PASS Summit last month, I did a set (Lightning Talk) about collation, and in particular, the difference between the “English” spoken by people from the US, Australia and the UK. One of the examples I gave was that in the US drivers might stop for gas, whereas in Australia, they just open the window a little. This is what’s known as a paraprosdokian, where you suddenly realise you misunderstood the first part of the sentence, based on what was said in the second. My current favourite is Emo Phillip’s line “I like to play chess with old men in the park, but it can be hard to find thirty-two of them.” Essentially, this a collation error, one that good comedians can get mileage from. Unfortunately, collation is at its worst when we have a computer comparing two things in different collations. They might look the same, and sound the same, but if one of the things is in SQL English, and the other one is in Windows English, the poor database server (with no sense of humour) will get suspicious of developers (who all have senses of humour, obviously), and declare a collation error, worried that it might not realise some nuance of the language. One example is the common scenario of a case-sensitive collation and a case-insensitive one. One may think that “Rob” and “rob” are the same, but the other might not. Clearly one of them is my name, and the other is a verb which means to steal (people called “Nick” have the same problem, of course), but I have no idea whether “Rob” and “rob” should be considered the same or not – it depends on the collation. I told a lie before – collation isn’t at its worst in the computer world, because the computer has the sense to complain about the collation issue. People don’t. People will say something, with their own understanding of what they mean. Other people will listen, and apply their own collation to it. I remember when someone was asking me about a situation which had annoyed me. They asked if I was ‘pissed’, and I said yes. I meant that I was annoyed, but they were asking if I’d been drinking. It took a moment for us to realise the misunderstanding. In business, the problem is escalated. A business user may explain something in a particular way, using terminology that they understand, but using words that mean something else to a technical person. I remember a situation with a checkbox on a form (back in VB6 days from memory). It was used to indicate that something was approved, and indicated whether a particular database field should store True or False – nothing more. However, the client understood it to mean that an entire workflow system would be implemented, with different users have permission to approve items and more. The project manager I’d just taken over from clearly hadn’t appreciated that, and I faced a situation of explaining the misunderstanding to the client. Lots of fun... Collation errors aren’t just a database setting that you can ignore. You need to remember that Americans speak a different type of English to Aussies and Poms, and techies speak a different language to their clients.

    Read the article

  • Windows 7 search not finding files

    - by Rob Nicholson
    Can anyone please explain this quirk in Windows 7 search (not a big fan of it - preferred XP method or least both). With Outlook, you sometimes have to find and delete your OST file. It resides in the user's profile folder. How come searching the entire C: drive for *.ost files works - they are in c:\Users\rob.nicholson\appdata somewhere but starting the search from c:\Users\rob.nicholson fails to find the files??? Cheers, Rob.

    Read the article

  • simulate backspace key with java.awt.Robot

    - by Tyler
    There seems to be an issue simulating the backspace key with java.awt.Robot. This thread seems to confirm this but it does not propose a solution. This works: Robot rob = new Robot(); rob.keyPress(KeyEvent.VK_A); rob.keyRelease(KeyEvent.VK_A); This doesn't: Robot rob = new Robot(); rob.keyPress(KeyEvent.VK_BACK_SPACE); rob.keyRelease(KeyEvent.VK_BACK_SPACE); Any ideas? Thanks!

    Read the article

  • A whole site for reviewing of SQL Server MVP Deep Dives

    - by Rob Farley
    This book just keeps amazing me. Not only as I read through some chapters for the first time, and others for the second and third times, but also as I read reviews of it written by other people. The guys over at http://sqlperspectives.wordpress.com are a prime example. They’ve been going through each chapter, each writing a review on it, and often getting a guest blogger to write something as well – and they’re clearly getting a lot of stuff out of this brilliant book. Back when I first heard about them doing this, I had offered to be involved, and recently did an interview with them about my chapters (chapter seven and chapter forty). That interview can be found at http://sqlperspectives.wordpress.com/2010/03/20/interview-with-rob-farley/ – and covers how I got into databases, and how I think the database roles in the IT industry are changing. If you don’t have a copy of SQL Server MVP Deep Dives yet, why not get a copy from http://www.sqlservermvpdeepdives.com (or persuade your local bookstore to get some copies in), and read through chapters with these guys? Treat it like a book club, discussing each chapter with others (guest blogging perhaps?), and you’ll probably end up getting even more out of it. Remember that the proceeds of the book go to charity (instead of the authors – we get nothing), so you don’t need to consider that you’re splashing out on a treat for yourself. Think of the kids helped by War Child instead. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Remote file access.

    - by Rob Rob
    Hi, We're needing to provide remote (read/write) access to a number of files on our network to several users (some technical, some non-technical) who will be running Windows. The non technical users will need to be able to access their files in an easy to use manner. From previous experience, we could do this with: (some sort of) VPN SSH and something like Dokan (i've only previously done this on linux with sshfs) WebDav FTP VPN and SSH access are more open that we need at present, so I'm leaning towards webdav, however I only have limited experience of it (setting up an SVN server several years ago), but my understanding is that users can access it through windows explorer. FTP I haven't had much experience of, as I've always used SFTP via ssh - but i'd imagine we could make this work in a similar way to ssh. So my question is - have I missed any obvious candidates for this task, or if webdav is (or isn't) suitable what are the security implications of using it for this (obviously https will be used for the transfers, etc). Thanks, Rob.

    Read the article

  • How Can I Install LibreOffice Base?

    - by Rob
    Useful info: I have tried running sudo dpkg --configure -a and sudo apt-get install -f with no result. I am running Kubuntu 11.10 (the updater is far too unreliable to ever be trusted with performing a version upgrade) The rest of LibreOffice seems to work fine (apart from an annoying bug where tooltips are shown as black text on black background...) I have need to use LibreOffice Base to complete a mail merge document. However, I noticed it's not installed. When I go to install it however... rob@hydrogen:~$ sudo apt-get install libreoffice-base [sudo] password for rob: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies. libreoffice-base : Depends: libreoffice-core (= 1:3.4.4-0ubuntu1) but it is not going to be installed Depends: libreoffice-base-core (= 1:3.4.4-0ubuntu1) but it is not going to be installed Depends: libreoffice-java-common (>= 1:3.4.4~) but it is not going to be installed Suggests: libmyodbc but it is not going to be installed or odbc-postgresql but it is not going to be installed or libsqliteodbc but it is not going to be installed or tdsodbc but it is not going to be installed or mdbtools but it is not going to be installed Suggests: libreoffice-gcj but it is not installable Suggests: libreoffice-report-builder but it is not going to be installed E: Unable to correct problems, you have held broken packages. I'm bemused as to which packages it seems to think I have held. As far as I'm aware, Kubuntu doesn't give you the option to hold packages... So, how do I get out of this dependency hell?

    Read the article

  • Joins in single-table queries

    - by Rob Farley
    Tables are only metadata. They don’t store data. I’ve written something about this before, but I want to take a viewpoint of this idea around the topic of joins, especially since it’s the topic for T-SQL Tuesday this month. Hosted this time by Sebastian Meine (@sqlity), who has a whole series on joins this month. Good for him – it’s a great topic. In that last post I discussed the fact that we write queries against tables, but that the engine turns it into a plan against indexes. My point wasn’t simply that a table is actually just a Clustered Index (or heap, which I consider just a special type of index), but that data access always happens against indexes – never tables – and we should be thinking about the indexes (specifically the non-clustered ones) when we write our queries. I described the scenario of looking up phone numbers, and how it never really occurs to us that there is a master list of phone numbers, because we think in terms of the useful non-clustered indexes that the phone companies provide us, but anyway – that’s not the point of this post. So a table is metadata. It stores information about the names of columns and their data types. Nullability, default values, constraints, triggers – these are all things that define the table, but the data isn’t stored in the table. The data that a table describes is stored in a heap or clustered index, but it goes further than this. All the useful data is going to live in non-clustered indexes. Remember this. It’s important. Stop thinking about tables, and start thinking about indexes. So let’s think about tables as indexes. This applies even in a world created by someone else, who doesn’t have the best indexes in mind for you. I’m sure you don’t need me to explain Covering Index bit – the fact that if you don’t have sufficient columns “included” in your index, your query plan will either have to do a Lookup, or else it’ll give up using your index and use one that does have everything it needs (even if that means scanning it). If you haven’t seen that before, drop me a line and I’ll run through it with you. Or go and read a post I did a long while ago about the maths involved in that decision. So – what I’m going to tell you is that a Lookup is a join. When I run SELECT CustomerID FROM Sales.SalesOrderHeader WHERE SalesPersonID = 285; against the AdventureWorks2012 get the following plan: I’m sure you can see the join. Don’t look in the query, it’s not there. But you should be able to see the join in the plan. It’s an Inner Join, implemented by a Nested Loop. It’s pulling data in from the Index Seek, and joining that to the results of a Key Lookup. It clearly is – the QO wouldn’t call it that if it wasn’t really one. It behaves exactly like any other Nested Loop (Inner Join) operator, pulling rows from one side and putting a request in from the other. You wouldn’t have a problem accepting it as a join if the query were slightly different, such as SELECT sod.OrderQty FROM Sales.SalesOrderHeader AS soh JOIN Sales.SalesOrderDetail as sod on sod.SalesOrderID = soh.SalesOrderID WHERE soh.SalesPersonID = 285; Amazingly similar, of course. This one is an explicit join, the first example was just as much a join, even thought you didn’t actually ask for one. You need to consider this when you’re thinking about your queries. But it gets more interesting. Consider this query: SELECT SalesOrderID FROM Sales.SalesOrderHeader WHERE SalesPersonID = 276 AND CustomerID = 29522; It doesn’t look like there’s a join here either, but look at the plan. That’s not some Lookup in action – that’s a proper Merge Join. The Query Optimizer has worked out that it can get the data it needs by looking in two separate indexes and then doing a Merge Join on the data that it gets. Both indexes used are ordered by the column that’s indexed (one on SalesPersonID, one on CustomerID), and then by the CIX key SalesOrderID. Just like when you seek in the phone book to Farley, the Farleys you have are ordered by FirstName, these seek operations return the data ordered by the next field. This order is SalesOrderID, even though you didn’t explicitly put that column in the index definition. The result is two datasets that are ordered by SalesOrderID, making them very mergeable. Another example is the simple query SELECT CustomerID FROM Sales.SalesOrderHeader WHERE SalesPersonID = 276; This one prefers a Hash Match to a standard lookup even! This isn’t just ordinary index intersection, this is something else again! Just like before, we could imagine it better with two whole tables, but we shouldn’t try to distinguish between joining two tables and joining two indexes. The Query Optimizer can see (using basic maths) that it’s worth doing these particular operations using these two less-than-ideal indexes (because of course, the best indexese would be on both columns – a composite such as (SalesPersonID, CustomerID – and it would have the SalesOrderID column as part of it as the CIX key still). You need to think like this too. Not in terms of excusing single-column indexes like the ones in AdventureWorks2012, but in terms of having a picture about how you’d like your queries to run. If you start to think about what data you need, where it’s coming from, and how it’s going to be used, then you will almost certainly write better queries. …and yes, this would include when you’re dealing with regular joins across multiples, not just against joins within single table queries.

    Read the article

  • PowerShell - grabbing values out of the registry and running them

    - by Rob Farley
    So I closed an application that runs when Windows starts up, but it doesn’t have a Start Menu entry, and I was trying to find it. Ok, I could’ve run regedit.exe, navigated through the tree and found the list of things that run when Windows starts up, but I thought I’d use PowerShell instead. PowerShell presents the registry as if it’s a volume on a disk, and you can navigate around it using commands like cd and dir. It wasn’t hard to find the folder I knew I was after – tab completion (starting the word and then hitting the Tab key) was a friend here. But unfortunately dir doesn’t list values, only subkeys (which look like folders). PS C:\Windows\system32> dir HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Run PS C:\Windows\system32> Instead, I needed to use Get-Item to fetch the ‘Run’ key, and use its Property property. This listed the values in there for me, as an array of strings (I could work this out using Get-Member). PS C:\Windows\system32> (Get-Item HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Run).Property QuickSet SynTPEnh Zune Launcher PS C:\Windows\system32> Ok, so the thing I wanted wasn’t in there (an app called PureText, whicih lets me Paste As Text using Windows+V). That’s ok – a simple change to use HKCU instead of HKLM (Current User instead of Local Machine), and I found it. Now to fetch the details of the application itself, using the RegistryKey method GetValue PS C:\Windows\system32> (Get-Item HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\Run).GetValue('PureText') "C:\Users\Rob\Utilities\PureText.exe" PS C:\Windows\system32> And finally, surrounding it in a bit of code to execute that command. That needs an ampersand and the Invoke-Expression cmdlet. PS C:\Windows\system32> '& ' + (Get-Item HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\Run).GetValue('PureText') | Invoke-Expression A simple bit of exploring PowerShell which will makes for a much easier way of finding and running those apps which start with Windows.

    Read the article

  • Using SQL Execution Plans to discover the Swedish alphabet

    - by Rob Farley
    SQL Server is quite remarkable in a bunch of ways. In this post, I’m using the way that the Query Optimizer handles LIKE to keep it SARGable, the Execution Plans that result, Collations, and PowerShell to come up with the Swedish alphabet. SARGability is the ability to seek for items in an index according to a particular set of criteria. If you don’t have SARGability in play, you need to scan the whole index (or table if you don’t have an index). For example, I can find myself in the phonebook easily, because it’s sorted by LastName and I can find Farley in there by moving to the Fs, and so on. I can’t find everyone in my suburb easily, because the phonebook isn’t sorted that way. I can’t even find people who have six letters in their last name, because also the book is sorted by LastName, it’s not sorted by LEN(LastName). This is all stuff I’ve looked at before, including in the talk I gave at SQLBits in October 2010. If I try to find everyone who’s names start with F, I can do that using a query a bit like: SELECT LastName FROM dbo.PhoneBook WHERE LEFT(LastName,1) = 'F'; Unfortunately, the Query Optimizer doesn’t realise that all the entries that satisfy LEFT(LastName,1) = 'F' will be together, and it has to scan the whole table to find them. But if I write: SELECT LastName FROM dbo.PhoneBook WHERE LastName LIKE 'F%'; then SQL is smart enough to understand this, and performs an Index Seek instead. To see why, I look further into the plan, in particular, the properties of the Index Seek operator. The ToolTip shows me what I’m after: You’ll see that it does a Seek to find any entries that are at least F, but not yet G. There’s an extra Predicate in there (a Residual Predicate if you like), which checks that each LastName is really LIKE F% – I suppose it doesn’t consider that the Seek Predicate is quite enough – but most of the benefit is seen by its working out the Seek Predicate, filtering to just the “at least F but not yet G” section of the data. This got me curious though, particularly about where the G comes from, and whether I could leverage it to create the Swedish alphabet. I know that in the Swedish language, there are three extra letters that appear at the end of the alphabet. One of them is ä that appears in the word Västerås. It turns out that Västerås is quite hard to find in an index when you’re looking it up in a Swedish map. I talked about this briefly in my five-minute talk on Collation from SQLPASS (the one which was slightly less than serious). So by looking at the plan, I can work out what the next letter is in the alphabet of the collation used by the column. In other words, if my alphabet were Swedish, I’d be able to tell what the next letter after F is – just in case it’s not G. It turns out it is… Yes, the Swedish letter after F is G. But I worked this out by using a copy of my PhoneBook table that used the Finnish_Swedish_CI_AI collation. I couldn’t find how the Query Optimizer calculates the G, and my friend Paul White (@SQL_Kiwi) tells me that it’s frustratingly internal to the QO. He’s particularly smart, even if he is from New Zealand. To investigate further, I decided to do some PowerShell, leveraging the Get-SqlPlan function that I blogged about recently (make sure you also have the SqlServerCmdletSnapin100 snap-in added). I started by indicating that I was going to use Finnish_Swedish_CI_AI as my collation of choice, and that I’d start whichever letter cam straight after the number 9. I figure that this is a cheat’s way of guessing the first letter of the alphabet (but it doesn’t actually work in Unicode – luckily I’m using varchar not nvarchar. Actually, there are a few aspects of this code that only work using ASCII, so apologies if you were wanting to apply it to Greek, Japanese, etc). I also initialised my $alphabet variable. $collation = 'Finnish_Swedish_CI_AI'; $firstletter = '9'; $alphabet = ''; Now I created the table for my test. A single field would do, and putting a Clustered Index on it would suffice for the Seeks. Invoke-Sqlcmd -server . -data tempdb -query "create table dbo.collation_test (col varchar(10) collate $collation primary key);" Now I get into the looping. $c = $firstletter; $stillgoing = $true; while ($stillgoing) { I construct the query I want, seeking for entries which start with whatever $c has reached, and get the plan for it: $query = "select col from dbo.collation_test where col like '$($c)%';"; [xml] $pl = get-sqlplan $query "." "tempdb"; At this point, my $pl variable is a scary piece of XML, representing the execution plan. A bit of hunting through it showed me that the EndRange element contained what I was after, and that if it contained NULL, then I was done. $stillgoing = ($pl.ShowPlanXML.BatchSequence.Batch.Statements.StmtSimple.QueryPlan.RelOp.IndexScan.SeekPredicates.SeekPredicateNew.SeekKeys.EndRange -ne $null); Now I could grab the value out of it (which came with apostrophes that needed stripping), and append that to my $alphabet variable.   if ($stillgoing)   {  $c=$pl.ShowPlanXML.BatchSequence.Batch.Statements.StmtSimple.QueryPlan.RelOp.IndexScan.SeekPredicates.SeekPredicateNew.SeekKeys.EndRange.RangeExpressions.ScalarOperator.ScalarString.Replace("'","");     $alphabet += $c;   } Finally, finishing the loop, dropping the table, and showing my alphabet! } Invoke-Sqlcmd -server . -data tempdb -query "drop table dbo.collation_test;"; $alphabet; When I run all this, I see that the Swedish alphabet is ABCDEFGHIJKLMNOPQRSTUVXYZÅÄÖ, which matches what I see at Wikipedia. Interesting to see that the letters on the end are still there, even with Case Insensitivity. Turns out they’re not just “letters with accents”, they’re letters in their own right. I’m sure you gave up reading long ago, and really aren’t that fazed about the idea of doing this using PowerShell. I chose PowerShell because I’d already come up with an easy way of grabbing the estimated plan for a query, and PowerShell does allow for easy navigation of XML. I find the most interesting aspect of this as the fact that the Query Optimizer uses the next letter of the alphabet to maintain the SARGability of LIKE. I’m hoping they do something similar for a whole bunch of operations. Oh, and the fact that you know how to find stuff in the IKEA catalogue. Footnote: If you are interested in whether this works in other languages, you might want to consider the following screenshot, which shows that in principle, it should work with Japanese. It might be a bit harder to run this in PowerShell though, as I’m not sure how it translates. In Hiragana, the Japanese alphabet starts ?, ?, ?, ?, ?, ...

    Read the article

  • When is your interview?

    - by Rob Farley
    Sometimes it’s tough to evaluate someone – to figure out if you think they’d be worth hiring. These days, since starting LobsterPot Solutions, I have my share of interviews, on both sides of the desk. Sometimes I’m checking out potential staff members; sometimes I’m persuading someone else to get us on board for a project. Regardless of who is on which side of the desk, we’re both checking each other out. The world is not how it was some years ago. I’m pretty sure that every time I walk into a room for an interview, I’ve searched for them online, and they’ve searched for me. I suspect they usually have the easier time finding me, although there are obviously other Rob Farleys in the world. They may have even checked out some of my presentations from conferences, read my blog posts, maybe even heard me tell jokes or sing. I know some people need me to explain who I am, but for the most part, I think they’ve done plenty of research long before I’ve walked in the room. I remember when this was different (as it could be for you still). I remember a time when I dealt with recruitment agents, looking for work. I remember sitting in rooms having been giving a test designed to find out if I knew my stuff or not, and then being pulled into interviews with managers who had to find out if I could communicate effectively. I’d need to explain who I was, what kind of person I was, what my value-system involved, and so on. I’m sure you understand what I’m getting at. (Oh, and in case you hadn’t realised, it’s a T-SQL Tuesday post, this month about interviews.) At TechEd Australia some years ago (either 2009 or 2010 – I forget which), I remember hearing a comment made during the ‘locknote’, the closing session. The presenter described a conversation he’d heard between two girls, discussing a guy that one of them had just started dating. The other girl expressed horror at the fact that her friend had met this guy in person, rather than through an online dating agency. The presenter pointed out that people realise that there’s a certain level of safety provided through the checks that those sites do. I’m not sure I completely trust this, but I’m sure it’s true for people’s technical profiles. If I interview someone, I hope they have a profile. I hope I can look at what they already know. I hope I can get samples of their work, and see how they communicate. I hope I can get a feel for their sense of humour. I hope I already know exactly what kind of person they are – their value system, their beliefs, their passions. Even their grammar. I can work out if the person is a good risk or not from who they are online. If they don’t have an online presence, then I don’t have this information, and the risk is higher. So if you’re interviewing with me, your interview started long before the conversation. I hope it started before I’d ever heard of you. I know the interview in which I’m being assessed started before I even knew there was a product called SQL Server. It’s reflected in what I write. It’s in the way I present. I have spent my life becoming me – so let’s talk! @rob_farley

    Read the article

  • Merge replication stopping without errors in SQL 2008 R2

    - by Rob Farley
    A non-SQL MVP friend of mine, who also happens to be a client, asked me for some help again last week. I was planning on writing this up even before Rob Volk (@sql_r) listed his T-SQL Tuesday topic for this month. Earlier in the year, I (well, LobsterPot Solutions, although I’d been the person mostly involved) had helped out with a merge replication problem. The Merge Agent on the subscriber was just stopping every time, shortly after it started. With no errors anywhere – not in the Windows Event Log, the SQL Agent logs, not anywhere. We’d managed to get the system working again, but didn’t have a good reason about what had happened, and last week, the problem occurred again. I asked him about writing up the experience in a blog post, largely because of the red herrings that we encountered. It was an interesting experience for me, also because I didn’t end up touching my computer the whole time – just tapping on my phone via Twitter and Live Msgr. You see, the thing with replication is that a useful troubleshooting option is to reinitialise the thing. We’d done that last time, and it had started to work again – eventually. I say eventually, because the link being used between the sites is relatively slow, and it took a long while for the initialisation to finish. Meanwhile, we’d been doing some investigation into what the problem could be, and were suitably pleased when the problem disappeared. So I got a message saying that a replication problem had occurred again. Reinitialising wasn’t going to be an option this time either. In this scenario, the subscriber having the problem happened to be in a different domain to the publisher. The other subscribers (within the domain) were fine, just this one in a different domain had the problem. Part of the problem seemed to be a log file that wasn’t being backed up properly. They’d been trying to back up to a backup device that had a corruption, and the log file was growing. Turned out, this wasn’t related to the problem, but of course, any time you’re troubleshooting and you see something untoward, you wonder. Having got past that problem, my next thought was that perhaps there was a problem with the account being used. But the other subscribers were using the same account, without any problems. The client pointed out that that it was almost exactly six months since the last failure (later shown to be a complete red herring). It sounded like something might’ve expired. Checking through certificates and trusts showed no sign of anything, and besides, there wasn’t a problem running a command-prompt window using the account in question, from the subscriber box. ...except that when he ran the sqlcmd –E –S servername command I recommended, it failed with a Named Pipes error. I’ve seen problems with firewalls rejecting connections via Named Pipes but letting TCP/IP through, so I got him to look into SQL Configuration Manager to see what kind of connection was being preferred... Everything seemed fine. And strangely, he could connect via Management Studio. Turned out, he had a typo in the servername of the sqlcmd command. That particular red herring must’ve been reflected in his cheeks as he told me. During the time, I also pinged a friend of mine to find out who I should ask, and Ted Kruger (@onpnt) ‘s name came up. Ted (and thanks again, Ted – really) reconfirmed some of my thoughts around the idea of an account expiring, and also suggesting bumping up the logging to level 4 (2 is Verbose, 4 is undocumented ridiculousness). I’d just told the client to push the logging up to level 2, but the log file wasn’t appearing. Checking permissions showed that the user did have permission on the folder, but still no file was appearing. Then it was noticed that the user had been switched earlier as part of the troubleshooting, and switching it back to the real user caused the log file to appear. Still no errors. A lot more information being pushed out, but still no errors. Ted suggested making sure the FQDNs were okay from both ends, in case the servers were unable to talk to each other. DNS problems can lead to hassles which can stop replication from working. No luck there either – it was all working fine. Another server started to report a problem as well. These two boxes were both SQL 2008 R2 (SP1), while the others, still working, were SQL 2005. Around this time, the client tried an idea that I’d shown him a few years ago – using a Profiler trace to see what was being called on the servers. It turned out that the last call being made on the publisher was sp_MSenumschemachange. A quick interwebs search on that showed a problem that exists in SQL Server 2008 R2, when stored procedures have more than 4000 characters. Running that stored procedure (with the same parameters) manually on SQL 2005 listed three stored procedures, the first of which did indeed have more than 4000 characters. Still no error though, and the problem as listed at http://support.microsoft.com/kb/2539378 describes an error that should occur in the Event log. However, this problem is the type of thing that is fixed by a reinitialisation (because it doesn’t need to send the procedure change across as a transaction). And a look in the change history of the long stored procs (you all keep them, right?), showed that the problem from six months earlier could well have been down to this too. Applying SP2 (with sufficient paranoia about backups and how to get back out again if necessary) fixed the problem. The stored proc changes went through immediately after the service pack was applied, and it’s been running happily since. The funny thing is that I didn’t solve the problem. He had put the Profiler trace on the server, and had done the search that found a forum post pointing at this particular problem. I’d asked Ted too, and although he’d given some useful information, nothing that he’d come up with had actually been the solution either. Sometimes, asking for help is the most useful thing you can do. Often though, you don’t end up getting the help from the person you asked – the sounding board is actually what you need. @rob_farley

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >