Search Results

Search found 21 results on 1 pages for 'saariko'.

Page 1/1 | 1 

• Administrator user session only shows a terminal

  - by Saariko

  Weird problem: After upgrading to 11.10 (and I am sure that I worked with it for couple of days). We had a power failure, and now, when open the computer, what I get is a screen, with a scrollable list of users (administrator is one of them). When I select the administrator user, and login, I get on the top left a terminal window. That's it ! I don't see my regular ubuntu desktop. What's wrong? I have tried some of the issues mentioned here: Delete the .Xauthority sudo apt-get update *I had some DNS errors, so had to fic my /etc/resolv.config (works now) please advise.

  Read the article

• Dual boot 12.04 and W7 - keybaord and screen not responsive

  - by Saariko

  I installed 12.04 using WUBI on a working W7 64bit system. both KB and mouse work perfect during the BIOS boot, and on the bootmgr, I can select Windows 7 or Ubuntu to load. Once I select Ubuntu, the KB and mouse seem to loose their power (light on the mouse and Numlock leds go off) After couple of seconds, the screen gets blurry. The screen pops back at the Ubuntu login screen, the mouse gets activated (light works, as well as mouse pointer is moving) However, the keyboard is not responsive to any click, nor does any icon on the login screen. - Using the mouse, I can't select the virtual keyboard, nor the shutdown icon - like it's not accepting any mouse clicks. The following Q&A didn't answer: Keyboard not responding at login with 12.04 dual boot on toshiba satellite L775 which links to a post on the web I also tried 12.04 - Windows 7 Dual boot - not responding to keyboard in boot menu - that goes beyond the login screen, but still didnt' assist me. It's a wired USB KB The board is an Intel board, and there isn't even a PS/2 connection anymore. Tried moving around the USB's Tried removing the Mouse, and only have the KB. Neither helped.

  Read the article

• Are the other organizations such as BSA that a small company can join?

  - by Saariko

  I am looking for other associations such as BSA. Setting aside the long debate about : should/can a software be protected?! I am currently actively looking for other, local, intentaional or even rgional groups/organizations that a small software company wants to join. I mark : small, since the BSA fees are expensive. please don't open the debate: if you are not big enough to pay the fee, than you are not big enough to join the __. Thank you

  Read the article

• Installation stops with cmd.exe window on Laptop

  - by Saariko

  I am installing W7 Ent on an LG R580. I am working with a valid ISO (installs perfect on other systems). During the installation, before the installation window, the process hangs, and I get a black, cmd.exe screen with the following: Select Administrator: X:\windows\system32\cmd.exe Microsoft Windows [Version 6.1.7601] with a prompt for: X:\windows\system32 My keyboard at that time only prints capital letters with '^' before each. Only thing that I am able to do is reboot. In the bios, I tried to disable USB Legacy ( thinking the problem is with my DVD ) - did not help.

  Read the article

• Error after moving WSUS DB from one server to another

  - by Saariko

  I have a WSUS 3.2 Installed on a Windows Server 2003 R2. SQL Server 2005. I want to move the WSUS DB from this server, to our new SQL Server 2008 R2 on a new Windows Server 2008 R2 Machine. After following 2 guides http://itechhawk.wordpress.com/2012/10/10/move-wsus-database-to-another-server/ http://davehope.co.uk/Blog/moving-a-wsus-database/ I encounter an error: I detached, copied, attached to the new server.

  Read the article

• Moving Farm to co-location hosting - network settings requirements

  - by Saariko

  I am moving my farm (2 Dell's R620) to a co-location hosting service. I am trying to figure out the secure way to have my network settings The requirements are: VM1 is the working HOST, includes: esxi 5.1, vSphere, 4 clients (w2008r2 all) VM2 has esxi 5.1 installed, and a single machine with Veeam Backup and copy 6.5 - keeping a copy of VM1 clients on the VM2 internal storage (this solution is due to a very small budget - in case of failure on Host 1 - can redirect IP's) Only 2 VM clients require network address and access from the WWAN - ISP provides IP's range for them (with Gateway and DNS) I need connection to the iDrac's from my office (option to create a VPN-SSL tunnel) Connection to the vSphere appliances I want to be able to RDP to the VM clients The current configuration is that each host has the iDrac dedicated nic connected , and another (NIC #1) connected - with a static IP on 192.168.3.x The iDrac's have a static IP from the same network range (19.168.3.x) It will look something like this: My thoughts: On NIC#2 of both hosts I will connected a crossed cable I will give each VM clients that needs internet access a 2ndry VM network with the assigned IP from the ISP open only to web - can not access from the My Question: Should I give IP's (external) to the machines who DO NOT require WWAN Access? - I can't see a way to RDP to them directly if not. Should I use the crossed cable? or just plug NIC #2 to the switch? Will this setup even work? What do I need to verify? What Virtual nic's and/or switches should I create on the Hosts?

  Read the article

• Why does a group policy not applied to the domain administrator account?

  - by Saariko

  I have a working policy on my entire domain. I just found out, when logging with the domain administrator, that this policy is not applied (EDIT: Running : gpresult shows that the GPO's are applied - but, this GPO is for Drive Mappings, and the actual drive mappings are NOT shown) The administrator account - does not have any login script on his profile tab. My GPO's are mainly small/atomic settings: single GPO to handle each settings: UAC, Firewall, printers. GPO status for the object is enabled That's an overview of the Drive Maps: Reading on MS support site, I checked the delegation tab, and it is marked as applied to domain and enterprise admins. Every user gets these policies correctly. The OU that is set is the root of the domain. (for testing purpose - I did that to eliminate hierarchy issues - did not help) Block Inheritance is disabled. (never used it anyway) GPO link GPO Security Filterings

  Read the article

• Why can't this user connect to domain share?

  - by Saariko

  Part of my reorganizing credentials in the domain, I have created several users that will be used solely for services (backup, LDAP, etc) The idea is that systems that need specific usage will use a user/service user, that will give them what they need. However, I am having trouble setting the correct needed data. For this example, I have a NAS (Ready NAS 1100 by Netgear), that runs it's own backup jobs. The job reads from a domain share: \domain\qa and copies all data to another location. When using the domain\administrator everything works. When I input the domain\srv.backup user I get an error connecting to the folder. The srv.backup is part of the 'Domain Admins' group, which is a member of 'Administrators' I thought there might be propagation issues, but even when the srv.backup user was a direct member of 'Administrators' the error still occurred. I have 2 DC's (W2K8R2 replicas) - I thought that could also cause a problem, AFAIKT it's not the issue. Sharing permissions are open to everyone The Security on the folder is as follow This is the test window from the NAS dashboard I doubled check that the 'srv.domain' is part of the 'Domain Admins' group As well as tried with a simple 1-9 password. What else do I need to check? thanks.

  Read the article

• Why are group policy preference drive mappings not applied to the domain administrator account?

  - by Saariko

  I have a working policy on my entire domain. I just found out, when logging with the domain administrator, that this policy is not applied (EDIT: Running : gpresult shows that the GPO's are applied - but, this GPO is for Drive Mappings, and the actual drive mappings are NOT shown) The administrator account - does not have any login script on his profile tab. To note: The mappings were applied before the GPO with a login script using the : net use ... command - all was working perfectly and correctly for the domain administrator user as well - That removes sharing and security problem (IMO) My GPO's are mainly small/atomic settings: single GPO to handle each settings: UAC, Firewall, printers. GPO status for the object is enabled That's an overview of the Drive Maps: Reading on MS support site, I checked the delegation tab, and it is marked as applied to domain and enterprise admins. Every user gets these policies correctly. The OU that is set is the root of the domain. (for testing purpose - I did that to eliminate hierarchy issues - did not help) Block Inheritance is disabled. (never used it anyway) GPO link GPO Security Filterings

  Read the article

• Understanding DHCP setting for DNS Server Options and Scope Options

  - by Saariko

  I have installed 2 DC's on my network (W2K8 R2) both serve as a replicate DC on my domain. On one of them (DC1) there is also a DHCP server running. On both I have a DNS server running. I am trying to understand the difference in the settings within the DHCP of Server Options and Scope Options. As I understand it: On the server options, I should put an external DNS for system (lets say 8.8.8.8 - google) And on the scope options, I should put both my internal dc1 and dc2 IP's as the server. - which are than distributed to my domain clients. Is that correct? Is there a better way? Do I need to add loopback address as well?

  Read the article

• How to enable RDP to a Server 2008 R2 on another network? VM network

  - by Saariko

  I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

  Read the article

• Trouble creating FTP in Server 2008

  - by Saariko

  I have been trying to create an FTP server on my new Server 2008. I have been following both (very detailed and highly published here guides) For setting up using IIS Manager http://learn.iis.net/page.aspx/321/configure-ftp-with-iis-7-manager-authentication/ and For anonymous FTP http://www.trainsignaltraining.com/windows-server-2008-ftp-iis7 I am able to log as an anonymous user. My need is to use a named user, so I need to use the IIS Manager. I get error 530 when trying to log as a user. Connected to 127.0.0.1. 220 Microsoft FTP Service User (127.0.0.1:(none)): ftpmanager 331 Password required for ftpmanager. Password: 530-User cannot log in. Win32 error: Logon failure: unknown user name or bad password. Error details: Filename: Error: 530 End Login failed. ftp> I can not learn from this message anything. My password is set to: 1234 (so I don't think I make a mistake here - testing purposes only ofc) Thank you. Note - I went over other posts on SE that I read, and couldn't get the result: IIS7 Windows Server 2008 FTP -> Response: 530 User cannot log in. FTP Error 530, User cannot log in, home directory inaccessible. Having trouble setting up FTP server on Windows Server 2008 EDIT I think I found some errors with the physical path. Going to Basic settings, and Test Connection on the physical path, gave me the following error: The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that \$ has Read access to the physical path. Then test these settings again. I am not sure which/whom should get access to the Root folder !? I want to point out, I managed to login with a domain user (change authorization and authentication methods) but this is NOT the requested solution. I checked to make sure that the FTP, folders, access is working properly. I am bit lost here. ==== More tries: I have enabled another Allow rule for ALL Users. I still get the same error. It seems that it doesn't matter if i use a correct or wrong password, I still get Error 530.

  Read the article

• How to know which disk has failed on a Mirrored Raid? marked as DR0 [migrated]

  - by Saariko

  Our 2ndry DC, which is on a W2K8R2 Mirrored software raid has lost it's sync, and disk management displays the failed redundancy error How do I know which of the disks has failed? (beside to try and replace one - and see if it loads and syncs) On the device manager, under disks I see both disks, one of them has an icon of: Disable, while the other doesn't Event log displays an event id 7 - bad block on Hard disk DR0 The thing is that looking in device manager, both disks are located in '0' location, which is bizzare

  Read the article

• How to know which disk has failed on a Mirrored Raid? marked as DR0

  - by Saariko

  Our 2ndry DC, which is on a W2K8R2 Mirrored software raid has lost it's sync, and disk management displays the failed redundancy error How do I know which of the disks has failed? (beside to try and replace one - and see if it loads and syncs) On the device manager, under disks I see both disks, one of them has an icon of: Disable, while the other doesn't Event log displays an event id 7 - bad block on Hard disk DR0 The thing is that looking in device manager, both disks are located in '0' location, which is bizzare

  Read the article

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• Getting started with the vCenter Web Client Administration tool

  - by Saariko

  I am trying to access a newly vCenter. The documentation clearly mentions to access the web-admin through: https://localhost:9443/admin-app but since I don't have a windows OS built under the vCenter (I use the vCenter Appliance) There is no localhost to use. If I try with the host IP I get the error: This PDF explains to install IIS component - But it's ESX 4 - and also not talking about appliance. so, a simple question: how can I access the web-app admin tool? also found a similar question on vmware forum. But I can't understand the solution/if any.

  Read the article

• Revert a VM client from within the VM Client - is it possible?

  - by Saariko

  I am creating a test VM client for our QA department. Once it's installed, my options will be: Use a snapshot Use non persistent disk on the hard disk. For either options, I can give the role of QA_DEP the ability to log to vCenter and go back/power-off the client - so they can return to their clean machine. My question: is it possible to have that ability without using vCenter? What If I want that on a Client reboot - it will return to it's initial/clean state? The clients are not gonna be heavy loaded.

  Read the article

• How can I know if a VM is used or not?

  - by Saariko

  I am running eSXI 4.1. In my main datastore I have plenty of folders, some of them has logical names, while the others don't, they hold BASE configurations/images of clients that I duplicate and activate. I only have a fraction of the actual clients loaded and running on the server. How can I know, but looking in the datastore folder, if the VM is in the inventory or not? If I right click on the vmx file, I can add it to the inventory - EVEN if the same client/folder is already active.

  Read the article

• Error connecting ESX 5.0.0 to domain

  - by Saariko

  I am trying to connect an ESX 5.0.0 to our Domain Controler, in order to give a Domain group specific roles security. But I do not see any groups after the host connects to the domain. Under Configuration - Authentication Services - I connected the host to the domain: I created the role I wanted, with the selected approved features But when I want to add a permission to a set of VM's, I can not see "my domain" on the drop down, only the: "localhost" How do I see "my domain" on the Domain drop down - so I can select the domain group to give the role to? To note: I followed the instructions to connect to the domain form VMware site.

  Read the article

• vmware host stuck after adding a virtual drive to client

  - by Saariko

  I use ESXi 5.0 I created a virtual (400GB) drive (located on an iSCSI mapped drive), and tried to add it to a specific client on the host. The task has stopped at 11%. After over an hour, it seems that everything is pretty stuck. Looking at the datastore - it says that 400GB are allocated, but I don't see the new drive with the client. How can I check if the process is still working? or should I restart the host and pray for good?

  Read the article

• Adobe AIR: touch screen doesn't trigger mouse down event correctly

  - by Saariko

  i have designed a gaming kiosk app in as3 i am using it on a Sony vaio l pc (like hp's touchsmarts) in windows 7 the app doesn't need any multi-touch gestures (only single touch clicks and drags) so i am using mouse events everything is fine (including mouse click and move events) except that a single touch to the screen (with no move) doesn't fire a mouse down. it is fired only after a small move of the finger outside the app, on my desktop, i see that the small windows 7 cursor jumps immediately to where a finger is placed, meaning this issue isn't a hardware or a windows problem but rather how internally the flash app receives "translated" touch-to-mouse events from the os. for example, in a windows Solitaire game, a simple touch to the screen immediately highlights the touched card. in my app, a button will change to the down state only if i touch it and also move my finger slightly (click events - down and up - are triggered fine) shouldn't the MOUSE_DOWN event trigger exactly like how a TOUCH_BEGIN would in the new touchevent class? any ideas?

  Read the article

1