Search Results

Search found 56 results on 3 pages for 'samarth agarwal'.

Page 1/3 | 1 2 3  | Next Page >

  • An Oracle's Interns Story by Samarth Varshney

    - by user769227
    I have written a short write-up about my experience at Oracle and am attaching some pics along:  I joined Oracle on 5th January 2011 as part of my internship program in BITS Pilani Goa Campus. In the short period of six months, I had the most beautiful and interesting time of my life. It was fun to work in Oracle, thanks to the whole team. I had an excellent manager, simple and sophisticated, who gave me the utmost enthusiasm to work. I gained a lot of knowledge during my internship, thanks to my colleagues. They were very helpful and motivated us (interns) in every possible way. In the initial stages of work, in which you know almost nothing, they helped me gain knowledge at a rapid speed. Thanks to the vast database of study material at the Oracle site, that I could start on with my project in a very short time.  For me, the time flew like anything and made the 6 months look like a few days. It was probably due to the team, that the work was so much fun. We had our deadlines but had full freedom as to how to work and when to work. I don't remember a single instance, in which I was working and not listening to songs. I mean it will always be a time to remember. I hope to join this company and make this time last forever.  Samarth 

    Read the article

  • Ubuntu 12.04 Faster boot, Hibernate & other questions

    - by Samarth Shukla
    I've recently started exploring Ubuntu (my 1st distro). I fresh installed precise without a swap (4GB ram). The only issues are, slow boot (regardless of the swap) and instability after a few days of installation. The runtime performance is immaculate otherwise. Even though not needed, I still set swappiness = 10. I've tried the quiet splash profile to GRUB; already have preload installed. But it still is pretty slow. I am not too confident on recompiling the kernel yet. But you could please advice me on that too. I've also added the following to fstab: #Move /tmp to RAM: tmpfs /tmp tmpfs defaults,noexec,nosuid 0 0 (Also if you could please tell me the exact implication/scope of this tweak on physical ram & the swap.) But nothing has happened really. So what alternatives are there to make it boot faster? Also, right after fresh install, though no swap partition, the system still showed /dev/zram0 of arond 2GB which was never used (probably because of the above fstab edit). Finally, I experimented with Hibernate a little, but many claim that it doesn't work on 12.04. (Not to mention, I made a swap file of 4GB for it). What I did was: sudo gedit /var/lib/polkit-1/localauthority/50-local.d/hibernate.pkla Then I added the following lines, saved the file, and closed the text editor: [Re-enable Hibernate] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes I also edited the upower policy for hibernate: gksudo gedit /usr/share/polkit-1/actions/org.freedesktop.upower.policy I added these lines: < allow_inactive >no< /allow_inactive > < allow_active >yes< /allow_active > But it did not work. So is there an alternate method perhaps that can make it work on 12.04?

    Read the article

  • Install/upgrade ubuntu from another system

    - by Samarth Agarwal
    I have a new Laptop with latest Ubuntu preinstalled on it, its 12.04. I have another laptop with Ubuntu 10.04 on it. What I lack is a fast internet connection. I want to upgrade my Ubuntu 10 laptop to a ubuntu 12 version. How is this possible without using internet connection? Can I move/copy the installation from the new laptop to the older one? Is there a way so that the newer laptop can upgrade the older one using a usb disk or dvd/cd?

    Read the article

  • Problem installing g++ ccompiler on Ubuntu 14.04

    - by Yash Agarwal
    I tried to install g++ using packages from another user. offline..but there were errors. After connecting to the net I tried to install using sudo apt-get install g++, but it gave the following output: gstreamer0.10-alsa is already the newest version. qtdeclarative5-ubuntu-ui-extras-browser-plugin is already the newest version. python-gconf is already the newest version. gstreamer0.10-tools is already the newest version. libglib2.0-0 is already the newest version. gir1.2-peas-1.0 is already the newest version. libatk-bridge2.0-0 is already the newest version. gnome-session-bin is already the newest version. libgomp1 is already the newest version. libmessaging-menu0 is already the newest version. usb-creator-gtk is already the newest version. libgnome-desktop-3-7 is already the newest version. software-properties-gtk is already the newest version. gnome-control-center-shared-data is already the newest version. unity-scope-gourmet is already the newest version. libcupsimage2 is already the newest version. growisofs is already the newest version. libjson-glib-1.0-common is already the newest version. activity-log-manager is already the newest version. libio-string-perl is already the newest version. qtdeclarative5-qtfeedback-plugin is already the newest version. gnome-power-manager is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. and many more lines like this....but g++ is still not installed

    Read the article

  • Benefit of using Data URI to embed images within HTML document and its cross-browser compatibility

    - by Manoj Agarwal
    I want to embed an image using Data URI within HTML document so that we don't need image as a separate attachment, we get just one HTML file that contains the actual image. What are its advantages and disadvantages? Does IE10 supports it? Is it useful to have such an implementation? I am working on an application, where we have html documents that link towards images stored in some location. If I use tiny online editor, as images are saved somewhere in the server, while editing the document, i can provide a link towards that image, but can't preview the final document with images from within tiny editor. If I chose to download the file locally, then i will need to download the images from server side. It looks a bit overkill, so I thought if Data URI could be used in such a situation.

    Read the article

  • What are algorithmic paradigms?

    - by Vaibhav Agarwal
    We generally talk about paradigms of programming as functional, procedural, object oriented, imperative etc but what should I reply when I am asked the paradigms of algorithms? For example are Travelling Salesman Problem, Dijkstra Shortest Path Algorithm, Euclid GCD Algorithm, Binary search, Kruskal's Minimum Spanning Tree, Tower of Hanoi paradigms of algorithms? Should I answer the data structures I would use to design these algorithms?

    Read the article

  • Screen Resolution stuck at 640x480 after installing Bumblebee

    - by Saurabh Agarwal
    I have a Dell XPS 15z laptop. As you can see here, there are some issues with NVidia drivers. The site recommends installation of Bumblebee (instructions given in the link). I am posting it again for ease: $ sudo add-apt-repository ppa:bumblebee/stable $ sudo apt-get update && sudo apt-get upgrade $ sudo apt-get install bumblebee bumblebee-nvidia $ sudo usermod -a -G bumblebee $USER After restarting the computer however, the screen resolution was stuck at 640x480 and I got the following error message as soon as I logged in: **Could not apply the stored configuration for monitors** none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Prior to the update, the display was absolutely normal and thus there is no doubt about the cause. Albeit, there was no support for graphic drivers. In case it helps, some features of graphics drivers seem to be functional after bumblebee, ie, all features are in order except for the resolution. And if the resolution can't be fixed, please suggest a way to retract the changes so that atleast the prior state may be reachieved. Any help in the matter would be highly appreciated.

    Read the article

  • How to start competitive programming?

    - by Vaibhav Agarwal
    I am practicing coding for a while but the problem is that it takes me a lot of time to write a solution for the problems. I want to ask if competitive programming can help me in improving this? If yes, then how should I start and from what site like TopCoder? I would obviously won't be able to solve very hard problems for now. What should I do? If no, what else should I do? I also have another problem that I want to learn coding but the thing is that I feel that I am not very good at it. What should I do? It's like bugging me from inside. I know some people may not find this question informative but please at least allow me to get an answer.

    Read the article

  • Recovering data from hard disk after an accidental Ubuntu reinstallation

    - by Saurabh Agarwal
    My computer got wiped accidentally due to a fresh Ubuntu installation. Since the drive contains very important data and codes, it would be really great if the same could be recovered. It is a 2TB hard drive which had Ubuntu 10.10 earlier. It now has a Ubuntu 12.04 installed on it (which I understand occupies ~4GB). The machine has been powered off since. The installation was done using a usb with the option where the previous ubuntu installation is removed. Since installation doesn't take a lot of time, I'm inclined to think that the disk wasn't completely formatted and that most of the data is still there. I have no experience with recovery and hence a detailed explanation is very helpful. NOTE: I can arrange an additional 2TB hard disk for copying data. My computer has a fast internet connection and I have other computers connected to the network which I may use to access the previous one as well.

    Read the article

  • Making a design for a Problem [closed]

    - by Vaibhav Agarwal
    I have written many codes using OOPS and I am still to understand when is a code good enough to be accepted by experts. The thought procedure of every man is different and so is the design. My question is should I do something in particular to design my programs in such a way that they are good enough to be accepted by people. Other thing I have also read Head First Object Oriented Design but at last I feel that the way they design the problems is much different I would have designed them.

    Read the article

  • How to disable drag and drop of text within the textarea? [migrated]

    - by Manoj Agarwal
    I am working on UI Design, where I need to use Html textarea object. The sample code is: <textarea rows="5" cols="60" spellcheck="false" style="font-size:12px; font-family: Verdana;"> Abc Xyz Mnp Pqr </textarea> I don't want to disable the textarea, since there are some cross-browser issues. If I point on 'y' in 'xyz' and drag it after text 'Mnp', it will be shifted as 'Mnpyz'. I want to avoid this drag and drop feature of text within the text area.

    Read the article

  • Get items selected from another form

    - by Samarth Agarwal
    Hi I have a Windows Form application. I have a Textbox. I want to implement a functionality like when the user clicks on the textbox, a list should be made available to the user and then the item selected from the list should be filled in the textbox. The list should not be available if some other control is focussed other than the textbox. What would be the better way to do this? Should I implement the list in the same form as the textbox or should I use another form for the list? I want to implement a functionality like in the Tally Accounting Software.

    Read the article

  • How do I setup a cloud server to share and sync files on ESXi hosted environment?

    - by Manoj Agarwal
    I want to setup my private cloud network for my company for syncing and sharing files. Instead of using existing players like dropbox, google drive, amazon etc. I want to setup my own cloud infrastructure. The requirement is to easily share private data internally within the organization. I already have an ESXi based cloud environment, running several virtual machines in it. Will it be feasible and achievable?

    Read the article

  • How to synchronize two folders on two remote Linux virtual machines

    - by Manoj Agarwal
    I have two virtual machines, Host OS is ESXi 3.5 and guest OS is Centos 4.6. There are two ESXi servers remotely located, each containing a Centos 4.6 virtual machine. I wish, whatever change I make in any file/folder in one virtual machine should be automatically synchronized on other remote virtual machine. The synchronization process should be automatic. It should only sync differentials, not simulate entire copy with overwrite operation. Sync should be intelligent enough to look for what has changed and what not, and should only update the changed files/folders. Further, there should be some sort of overview and selection for syncing, for example, if it shows 4 files have changed, It should be possible to sync only two files and leave other two for the time being. So, some intelligent syncing mechanism for Linux is needed.

    Read the article

  • Load Testing Linux Virtual Server

    - by Anubhav Agarwal
    I have configured a Linux virtual network with following configuration 172.17.6.112- VIP 172.17.6.111- Linux Director | |----------172.17.6.113 --- Real Server 1 |----------172.17.6.114 --- Real Server 2 I am using direct routing technique. I am unable to test my LVS network. Are there some good scripts/softwares available for load testing. I am running apache2.0 service on them. I came across with testlvs on the internet but am unable to understand its documentation. Are there more simpler ones I want to test the response time of server using various scheduling algorithms .

    Read the article

  • How to show files being copied, moved,etc. on installer screen using WIX

    - by Sunil Agarwal
    Hi... I have my installer and is working fine. What I want to add more is that I want to show the work done by installer on installer screen (Example, installing Microsoft SQL Server 2005, we get the files being copied, moved, registry entry created,......) Similarly I want to show this on my installer. So can anyone help me on this to how to show all these at runtime on installer screen. Thanks, Sunil

    Read the article

  • Aspect oriented Programming?

    - by Jaswant Agarwal
    How can we apply attributes to class fucntion using AOP in C#? UPDATE: I am slightly not clear in what context AOP should be used? As we can use AOP for logging purpose, security(Authentication), please suggest some other scenarios where we can take benefit of AOP Is AOP can be use to share data among different running threads in application process?

    Read the article

  • Will the values of label and its correspondences change if Image is rotated?

    - by Vinayak Agarwal
    Hi all I have an image in which a text like "VINAYAK 123" is written. The text in the image is at a certain angle, say 30degrees. Now when I extract the labels of the connected components, I get V-1, I-2, N-3, A-4,Y-5,A-6,K-7, 1-8,2-9,3-10( Format: Character- Label No.). Now I rotate the image 30 degrees in the clockwise direction to make the text in the image horizontal. My question is that now if I extract the labels of the connected components, will the character and the label no. correspondence still remain the same? Thanks in advance!

    Read the article

  • WaitForSingleObject( )

    - by Rakesh Agarwal
    I have got myself stuck into a really amazing issue here.The code is like as below. class A { public: A(){ m_event = CreateEvent(NULL, false, false, NULL); // create an event with initial value as non-signalled m_thread = _beginthread(StaticThreadEntry, 0, this); // create a thread } static void StaticThreadEntry(A * obj) { obj->ThreadEntry(); } void ThreadEntry(); }; void A::ThreadEntry() { WaitforSingleObject(m_event,INFINITE); } int main() { A a; SetEvent(m_event); // sets the event to signalled state which causes the running thread to terminate WaitForSingleObject(m_thread, INFINITE); // waits for the thread to terminate return 0; } Problem : When the above code is run,sometimes( 1 out of 5 ) it hangs and the control gets stuck in the call to WaitforSingleObject()( inside the main function ).The code always calls SetEvent() function to ensure that the thread would terminate before calling Wait() function. I do not see any reason why it should ever hang?

    Read the article

  • Ember multiple property changes but want to trigger single event

    - by Ankur Agarwal
    I have a ArrayController for date picker with properties to and from. Now when user selects a new date range from the UI both to and from value changes. So a function which observers on to and from is trigger twice for a single change in date range. I want to trigger the function only one every date range change. Any suggestions how to do that with ember app = Ember.Application.create(); app.Time = Ember.ArrayController.create({ to: null, from: null, rootElement: "#time", debug1: function() { this.set('to', 1); this.set('from', 2); }, debug2: function() { this.setProperties( { 'to': 3, 'from': 4 }); }, debug3: function() { this.beginPropertyChanges(); this.set('to', 5); this.set('from', 6); this.endPropertyChanges(); }, search: function() { alert('called'); }.observes('to', 'from') }); View in JS Fiddle

    Read the article

1 2 3  | Next Page >