Search Results

Search found 597 results on 24 pages for 'sean francis ballais'.

Page 1/24 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Up in the Air: Team Oracle Play-by-Play

    - by Aaron Lazenby
    Yesterday, I had the amazing opportunity to fly along with Sean D. Tucker and Team Oracle. Leaving from the San Carols airport, we did a 30 minute flight over the Pacific just south of the coastal town of Half Moon Bay. In that half hour, I rode through a massive 4G loop, survived a crushing hammerhead, and took control of the plane to perform a basic wing over (you can learn what the heck I'm talking about by visiting this website). I have lots of great video, but it's going to take me some time to make sense of it. For now, here's my Twitter-based play-by-play of yesterday's events. Many thanks to Sean D. Tucker and the whole crew (Ben and Ian, especially) for this great opportunity to fly with Team Oracle.Live tweets from @OracleProfitI will be spending the afternoon in a stunt plane, upside down above the San Francisco bay. http://bit.ly/cwkrkIAt the San Carlos airport. More than slightly freaked out. Shaking hands diminish texting ability. Slightly reassuring. http://yfrog.com/1qt61nj There go the doors to the photo plane... #teamoracle http://yfrog.com/58ywljSean D Tucker assures me: "The sky is a great place to be." Helpful, but I'm still nervous. #teamoracle"You get a parachute. He gets a harness." How was this decision made? #teamoracleThe plane with @radu43 has returned. I'm up next...Couldn't help myself...drank a soda before flying. Mistake? We'll see... #teamoracleAdvice of the day "If you pull with two hands, you improve the chances of the chute deploying on the first try." Lovely. #teamoracleI feel so strange. But I flew a high performance airplane. And did an aerobatics move. Wild. #teamoracle"Flying ten feet off he ground, upside-down at 250 miles per hour isn't exciting to me." Sean D. Tucker #teamoracle"What is exciting to me is flying that perfect pattern, just like I imagined it in my head." Sean D. Tucker #teamoracle"You're going to sleep well tonight. You just carried four times your body weight." #teamoracle #gforce Just watched the #teamoracle plane take off for its flight home. I'm waiting for Caltrain. #undignifiedanticlimaxEnough with the #teamoracle. Check http://blogs.oracle.com/profit for the video. Coming soon! 

    Read the article

  • Tomorrow: Profit Rides into the DANGER ZONE!!!

    - by Aaron Lazenby
    On May 4 I'll be suiting up with Oracle social media maven Marius Ciortea-- Iceman and Maverick-style--for a flight in the Team Oracle stunt plane. World-renowned pilot Sean Tucker and his team were nice enough to invite us along to participate in aerial photo shoots over Oracle headquarters and the San Francisco bay. I don't think we'll be able to recreate the epic tension generated between Tom Cruise and Val Kilmer in "Top Gun" but we'll do our best to get some good photos, videos, and interviews along the way. Check back on Wednesday for a full report.

    Read the article

  • Xorg does not see my monitor EDID

    - by sean farley
    Below is the output from my Xorg.0. X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 22.311] X Protocol Version 11, Revision 0 [ 22.311] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 22.311] Current Operating System: Linux sean-P55-USB3 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 22.311] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=0a34603e-aee9-44d1-8982-a5a5a38c3e4d ro quiet splash [ 22.311] Build Date: 29 August 2012 12:12:33AM [ 22.311] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 22.311] Current version of pixman: 0.24.4 [ 22.311] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 22.311] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 22.311] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 17 13:20:45 2012 [ 22.311] (==) Using config file: "/etc/X11/xorg.conf" [ 22.311] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 22.311] (==) No Layout section. Using the first Screen section. [ 22.311] (==) No screen section available. Using defaults. [ 22.311] (**) |-->Screen "Default Screen Section" (0) [ 22.311] (**) | |-->Monitor "<default monitor>" [ 22.311] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 22.311] (**) | |-->Device "Default Device" [ 22.311] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 22.311] (==) Automatically adding devices I have searched all over, and followed lots of dead ends and unanswered questions on this issue. I need to get this monitor recognised so I can use the native resolution of 1600x1200. The Nvidia driver in Windows has no problem with this. The monitor is an old Iiyama HM204DT A. Is there a way of configuring Xorg manually to get these working? I have tried xrandr but this will not work. Output:- sean@sean-P55-USB3:~$ xrandr Screen 0: minimum 8 x 8, current 1152 x 864, maximum 16384 x 16384 DVI-I-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 disconnected (normal left inverted right x axis y axis) Tried Nvidia Xorg.config: sean@sean-P55-USB3:~$ sudo nvidia-xconfig [sudo] password for sean: Using X configuration file: "/etc/X11/xorg.conf". VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf. Device section "Default Device" must have a Driver line. Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.nvidia-xconfig-original' Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup' New X configuration file written to '/etc/X11/xorg.conf' How do I insert a driver line? This is a bit of a pain as I want to use my Vectorworks cad program in a WinXP Vbox at 1600x1200 but all virtual drives are restricted to the host screen resolution. Do i need to manually create EIDI info in Xorg? I am slightly confused about how Xorg and Nvidia relate Please help

    Read the article

  • "type" Command Not Working As Expected on Git Bash

    - by trysis
    The type command, in Linux, returns the location, on the filesystem, of the given file, if it is in the current folder or the $PATH. This functionality is also available through Windows with the Git Bash command line program. The command also returns a file's location given the file without its extension (.exe, .vbs, etc.) However, I have run into what seems like a strange corner case where the file exists on the $PATH but doesn't get returned using the command. I am thinking of buying a new computer soon, so I looked up the method of transferring the license key from one computer to another, in preparation for actually doing this. The method I found mentioned the files slmgr.vbs and slui.exe, both of which reside in the C:/Windows\System32 folder, which is in my $PATH, as usual for a Windows computer. However, these two files aren't showing up when I use the type command. Also, neither gets executed when I call the files as commands without their extensions in Git Bash, and only slmgr.vbs gets executed when I call them with the extensions. Finally, slmgr.vbs is shown when listing the folder's contents in Git Bash, as well, but slui.exe isn't. I thought this might have to do with permissions, and, indeed, both files have very restrictive permissions, as you can see in the pictures below, but they both have the same permissions, which wouldn't explain why one gets executed and the other doesn't when called directly, nor why one file is listed on command line but the other isn't. C:\Windows\System32 folder, proving the files exist: File permissions for the Users and Administrators groups for the two files (they are identical): And the folder: type command and its output in Git Bash for the 2 files, plus listing the files in the folder (using grep to filter as the folder is huge), as well as listing part of the $PATH (keep in mind, for all these, that Git Bash changes the paths as they are displayed): Sean@MYPC ~ $ type -a slmgr sh.exe": type: slmgr: not found Sean@MYPC ~ $ type -a slmgr.vbs sh.exe": type: slmgr.vbs: not found Sean@MYPC ~ $ type -a slui sh.exe": type: slui: not found Sean@MYPC ~ $ type -a slui.exe sh.exe": type: slui.exe: not found Sean@MYPC ~ $ slmgr sh.exe": slmgr: command not found Sean@MYPC ~ $ slmgr.vbs /c/WINDOWS/system32/slmgr.vbs: line 2: syntax error near unexpected token `(' /c/WINDOWS/system32/slmgr.vbs: line 2: `' Copyright (c) Microsoft Corporation. A ll rights reserved.' Sean@MYPC ~ $ slui sh.exe": slui: command not found Sean@MYPC ~ $ slui.exe sh.exe": slui.exe: command not found Sean@MYPC ~ $ ls /c/Windows/System32/slui.exe /c/Windows/System32/slmgr.vbs ls: /c/Windows/System32/slui.exe: No such file or directory /c/Windows/System32/slmgr.vbs Sean@MYPC ~ $ echo $PATH /c/Users/Sean/bin:.:/usr/local/bin:/mingw/bin:/bin:/cmd:/c/Python33/:/c/Program Files (x86)/Intel/iCLS Client/:/c/Program Files/Intel/iCLS Client/:/c/WINDOWS/sy stem32:/c/WINDOWS:/c/WINDOWS/System32/Wbem:/c/WINDOWS/System32/WindowsPowerShell /v1.0/:/c/Program Files/Intel/Intel(R) Management Engine Components/DAL:/c/Progr am Files/Intel/Intel(R) Management Engine Components/IPT:/c/Program Files (x86)/ Intel/Intel(R) Management Engine Components/DAL:/c/Program Files (x86)/Intel/Int el(R) Management Engine Components/IPT:/c/Program Files/Intel/WiFi/bin/:/c/Progr am Files/Common Files/Intel/WirelessCommon/:/c/strawberry/c/bin:/c/strawberry/pe rl/site/bin:/c/strawberry/perl/bin:/c/Program Files (x86)/Microsoft ASP.NET/ASP. NET Web Pages/v1.0/:/c/Program Files/Microsoft SQL Server/110/Tools/Binn/:/c/Pro gram Files (x86)/Microsoft SQL Server/90/Tools/binn/:/c/Program Files (x86)/Open AFS/Common:/c/HashiCorp/Vagrant/bin:/c/Program Files (x86)/Windows Kits/8.1/Wind ows Performance Toolkit/:/c/Program Files/nodejs/:/c/Program Files (x86)/Git/cmd :/c/Program Files (x86)/Git/bin:/c/Program Files/Microsoft/Web Platform Installe r/:/c/Ruby200-x64/bin:/c/Users/Sean/AppData/Local/Box/Box Edit/:/c/Program Files (x86)/SSH Communications Security/SSH Secure Shell:/c/Users/Sean/Documents/Lisp :/c/Program Files/GCL-2.6.1/lib/gcl-2.6.1/unixport:/c/Chocolatey/bin:/c/Users/Se an/AppData/Roaming/npm:/c/wamp/bin/mysql/mysql5.6.12/bin:/c/Program Files/Oracle /VirtualBox:/c/Program Files/Java/jdk1.7.0_51/bin:/c/Program Files/Node-Growl:/c /chocolatey/bin:/c/Program Files/eclipse:/c/MongoDB/bin:/c/Program Files/7-Zip:/ c/Program Files (x86)/Google/Chrome/Application:/c/Program Files (x86)/LibreOffi ce 4/program:/c/Program Files (x86)/OpenOffice 4/program What's happening? Why aren't these files listed with the type command? Is this issue because of weird Windows permissions, or something even weirder? If permissions, why do they seem to have the same permissions, yet both are not handled in the same way?

    Read the article

  • Podcast Show Notes: The Red Room Interview &ndash; Part 1

    - by Bob Rhubart
      The latest OTN Arch2Arch podcast is Part 1 of a three-part series featuring a discussion of a broad range of SOA  issues with three members of the small army of contributors to The Red Room Blog, now part of the OJam.biz site, the Australia-New Zealand outpost of the global Oracle community. The panelists for this program are: Sean Boiling - Sales Consulting Manager for Oracle Fusion Middleware LinkedIn | Twitter | Blog Richard Ward - SOA Channel Development Manager at Oracle LinkedIn | Blog Mervin Chiang - Consulting Principal at Leonardo Consulting LinkedIn | Twitter | Blog (You can also follow the Red Room itself on Twitter: @OracleRedRoom.) The genesis of this interview goes back to 2009, and the original Red Room blog, on which Sean, Richard, Mervin, and other Red Roomers published a 10-part series of posts that, taken together, form a kind of SOA best-practices guide, presented in an irreverent style that is rare in a lot of technical writing. It was on the basis of their expertise and irreverence that I wanted to get a few of the Red Room bloggers on an Arch2Arch podcast.  Easier said than done. Trying to schedule a group interview with very busy people on the other side of world (they’re actually 15 hours in the future, relative to my location) is not a simple process. The conversations about getting some of the Red Room people on the program began in the summer of 2009. The interview finally happened at 5:30 PM EDT on Tuesday March 30, 2010, which for the panelists, located in Australia, was 8:30 AM on Wednesday March 31, 2010. I was waiting for dinner, and Sean, Richard, and Mervin were waiting for breakfast. But the call went off without a hitch, and the panelists carried on a great discussion of SOA issues. Listen to Part 1 Many thanks to Gareth Llewellyn for his help in putting this together. SOA Best Practices Here’s a complete list of the posts in the original 10-part Red Room series: SOA is Dead. Long Live SOA by Sean Boiling Are you doing SOP’s instead of SOA? by Saul Cunningham All The President's SOA by Sean Boiling SOA – Pay Now or Pay Dearly by Richard Ward SOA where are the skills? by Richard Ward Project Management Pitfalls within SOA by Anton Gouws Viewing SOA as a project instead of an architecture by Saul Cunningham Kiss and Tell by Sean Boiling Failure to implement and adhere to SOA Governance by Mervin Chiang Ten Out Of Ten by Sean Boiling Parts 2 of the Red Room Interview will be available next week, followed by Part 3, so stay tuned: RSS Change in the Wind Beginning with next week’s program, the OTN Arch2Arch Podcast will be rechristened as the OTN ArchBeat Podcast, to better align with this blog. The transformation will be painless – you won’t feel a thing.   del.icio.us Tags: otn,oracle,Archbeat,Arch2Arch,soa,service oriented architecture,podcast Technorati Tags: otn,oracle,Archbeat,Arch2Arch,soa,service oriented architecture,podcast

    Read the article

  • Blank black screen with cursor after login -- RHEL5

    - by Sean O.
    I have a RHEL 5 machine here which is a Dell Precision T3500. I'm an Ubuntu guy, but I'm having a heck of a time with this machine. After processing its first security update, we cannot log in via the gdm greeter. A new kernel was installed; then I installed the nVidia drivers for our Quadro NVS 295. I know the X configuration is valid because the gdm greeter does display; however, upon login all we can get is a blank, black screen with a cursor. I thought perhaps our python installation was corrupted but a reinstall via yum has not helped. I have searched & googled extensively for a potential fix for this and can find nothing. Below are outputs from uname, a tail of an error in /var/log/messages, and the Xorg.conf. Can anyone suggest a course of action? [sean@cheetah ~]$ uname -a Linux cheetah.*.* 2.6.18-308.8.1.el5 #1 SMP Fri May 4 16:43:02 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux [sean@cheetah ~]$ sudo tail /var/log/messages Jun 5 15:03:04 cheetah gconfd (sean-4592): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jun 5 15:03:05 cheetah hcid[3855]: Default passkey agent (:1.8, /org/bluez/applet) registered Jun 5 15:03:05 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:03:05 cheetah last message repeated 2 times Jun 5 15:03:06 cheetah gconfd (sean-4592): Resolved address "xml:readwrite:/home/sean/.gconf" to a writable configuration source at position 0 Jun 5 15:03:06 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:07 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:08 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:07:01 cheetah ntpd[4114]: synchronized to 64.16.211.38, stratum 3 Jun 5 15:07:01 cheetah ntpd[4114]: kernel time sync enabled 0001 [sean@cheetah ~]$ cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012 # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Dell Studio 1737 Overheating

    - by Sean
    I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

    Read the article

  • Mono mkbundle issue

    - by Sean
    Hello, I am trying to bundle mono runtime with a C# a simple (console) program that does nothing, but 'hello world'. Got Cygwin, configured it all, though it fails: $ mkbundle -o x2 x.exe --deps -z OS is: Windows Sources: 1 Auto-dependencies: True embedding: C:\cygwin\home\Sean\x.exe compression ratio: 31.71% embedding: C:\PROGRA~2\MONO-2~1.1\lib\mono\4.0\mscorlib.dll compression ratio: 34.68% Compiling: as -o temp.o temp.s gcc -mno-cygwin -g -o x2 -Wall temp.c `pkg-config --cflags --libs mono-2|dos2unix` -lz temp.o temp.c: In function `main': temp.c:173: warning: implicit declaration of function `g_utf16_to_utf8' temp.c:173: warning: assignment makes pointer from integer without a cast temp.c:188: warning: assignment makes pointer from integer without a cast /tmp/ccu8fTcQ.o: In function `main': /home/Sean/temp.c:173: undefined reference to `_g_utf16_to_utf8' /home/Sean/temp.c:188: undefined reference to `_g_utf16_to_utf8' collect2: ld returned 1 exit status [Fail] Tried post with similar problem to mine here, but it didn't work either. My configuration: Windows 7 64bit Mono 2.8.1 Latest Cygwin Not sure what's the story here. Help appreciated.

    Read the article

  • OrbitFX: JavaFX 8 3D & NetBeans Platform in Space!

    - by Geertjan
    Here is a collection of screenshots from a proof of concept tool being developed by Nickolas Sabey and Sean Phillips from a.i. solutions. Before going further, read a great new article here written on java.net by Kevin Farnham, in light of the Duke's Choice Award (DCA) recently received at JavaOne 2013 by the a.i. solutions team. Here's Sean receiving the award on behalf of the a.i. solutions team, surrounded by the DCA selection committee and other officials: They won the DCA for helping facilitate and deploy the 2014 launch of NASA's Magnetospheric Multiscale mission, using JDK 7, the NetBeans Platform, and JavaFX to create the GEONS Ground Support System, helping reduce software development time by approximately 35%. The prototype tool that Nicklas and Sean are now working on uses JavaFX 3D with the NetBeans Platform and is nicknamed OrbitFX. Much of the early development is being done to experiment with different patterns, so that accuracy is currently not the goal. For example, you'll notice in the screenshots that the Earth is really close to the Sun, which is obviously not correct. The screenshots are generated using Java 8 build 111, together with NetBeans Platform 7.4. Inspired by various JavaOne demos using JavaFX 3D, Nick began development integrating them into their existing NetBeans Platform infrastructure. The 3D scene showing the Sun and Earth objects is all JavaFX 8 3D, demonstrating the use of Phong Material support, along with multiple light and camera objects. Each JavaFX component extends a JFXPanel type, so that each can easily be added to NetBeans Platform TopComponents. Right-clicking an item in the explorer view offers a context menu that animates and centers the 3D scene on the selected celestial body.  With each JavaFX scene component wrapped in a JFXPanel, they can easily be integrated into a NetBeans Platform Visual Library scene.  In this case, Nick and Sean are using an instance of their custom Slipstream PinGraphScene, which is an extension of the NetBeans Platform VMDGraphScene. Now, via the NetBeans Platform Visual Library, the OrbitFX celestial body viewer can be used in the same space as a WorldWind viewer, which is provided by a previously developed plugin. "This is a clear demonstration of the power of the NetBeans Platform as an application development framework," says Sean Phillips. "How else could you have so much rich application support placed literally side by side so easily?"

    Read the article

  • What should I use Ubuntu for? [closed]

    - by Sean francis Ballais
    I need some of your precious advice co-Ubuntu users. I have been a full Ubuntu user for a few months now and our old 2005 model PC just broke down and so my parents gave me a new PC (notebook). I have installed Windows 7 Ultimate for some reason. Now, my problem is that, since I am a amateur graphic designer, website developer, software developer and other professions a normal teenager won't try and I am using Adobe Creative Suite CS6 Master Collection for my multimedia creation and web development needs, what could I use Ubuntu Linux for? Software development? Website Usability Testing? Other Multimedia stuff? Etc.? Need real help because my mind is getting confused in what should I use Ubuntu for... Any help will be welcomed with appreciation. :D P.S. Don't suggest to me any games because I'm no gamer.

    Read the article

  • How to communicate within a company what is being Continually Deployed

    - by Francis Spor
    I work for a small development company, 20 people total in the entire company, 3 in actual development, and we've adopted CD for our commits to trunk, and it works great, from a code management and up-time side. However - we're getting flak from our support staff and marketing department that they don't feel that they're getting enough lead time on new features and notifications on bug fixes that could change behavior. Part of why we love the CD system is for us in development, it's fast, we fix the bug, add the quick feature, close the Bugz and move on with our day to the next item. All members of our company are now on HipChat at all times, and when a deployment occurs, a message is sent to a room that all company members are in, letting them know what was just deployed (it just shows the commit messages from tip back to the last recorded deployment). We in development are also attempting to make sure that when we're making a change that modifies the UI or a public facing behavior, we post a screenshot to the All Company room and explain what the behavior change is, seeking pushback or concerns. Often, the response is silence. Sometimes, it's a few minor questions, but nothing that need stop the deployment from happening. What I'm wondering is how do other users of the CD method deal with notifications of new features and changes to areas of the company that are not development - and eventually on to customers in the world? Thanks, Francis

    Read the article

  • BUILD 2013 Session&ndash;Testing Your C# Base Windows Store Apps

    - by Tim Murphy
    Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/build-2013-sessionndashtesting-your-c-base-windows-store-apps.aspx Testing an application is not what most people consider fun and the number of situation that need to be tested seems to grow exponentially when building mobile apps.  That is why I found the topic of this session interesting.  When I found out that the speaker, Francis Cheung, was from the Patterns and Practices group I knew I was in the right place.  I have admired that team since I first met Ron Jacobs around 2001.  So what did Francis have to offer? He started off in a rather confusing who’s on first fashion.  It seems that one of his tester was originally supposed to give the talk, but then it was decided that it would be better to have someone who does development present a testing topic.  This didn’t hinder the content of the talk in the least.  He broke the process down in a logical manner that would be straight forward to understand if not implement. Francis hit the main areas we usually think of such as tombstoning, network connectivity and asynchronous code, but he approached them with tools they we may not have thought of until now.  He relied heavily on Fiddler to intercept and change the behavior of network requests. Then there are the areas you might not normal think to check.  This includes localization, accessibility and updating client code to a new version.  These are important aspects of your app that can severely impact how customers feel about your app.  Take the time to view this session and get a new appreciation for testing and where it fits in your development lifecycle. del.icio.us Tags: BUILD 2013,Testing,C#,Windows Store Apps,Fiddler

    Read the article

  • Podcast Show Notes: The Red Room Interview &ndash; Part 2

    - by Bob Rhubart
    Room bloggers Sean Boiling, Richard Ward, and Mervin Chaing bring their in-the-trenches perspective to the conversation once again in this week’s edition of the OTN ArchBeat Podcast. Listen. (Missed last week? No problemo: Listen to Part 1) In this segment the conversation turns to SOA governance and balancing the need for reuse against the need for speed.  It’s no mystery that many people react to the term “SOA Governance” in much the same way as they would to the sound of Darth Vader’s respirator. But Mervin explains how a simple change in terminology can go a long way toward lowering blood pressure. Those interested in connecting with Sean, Richard, or Mervin can do so via the links listed below: Sean Boiling - Sales Consulting Manager for Oracle Fusion Middleware LinkedIn | Twitter | Blog Richard Ward - SOA Channel Development Manager at Oracle LinkedIn | Blog Mervin Chiang - Consulting Principal at Leonardo Consulting LinkedIn | Twitter | Blog And you’ll find the complete list of the Red Room SOA Best Practice Posts in last week’s show notes. The third and final segment of the Red Room series runs next week.  I have enough material from the original interview for a fourth program,  but it’ll have to wait. Also, as mentioned last week, the podcast name change is now complete, from Arch2Arch, to ArchBeat. As WPBH-TV9 weatherman Phil Connors says, “Anything different is good.”   Technorati Tags: archbeat,podcast. arch2arch,soa,soa governance,oracle,otn Flickr Tags: archbeat,podcast. arch2arch,soa,soa governance,oracle,otn

    Read the article

  • Oracle Customer Experience Summit @ OpenWorld

    - by Christie Flanagan
    This first-ever Oracle Customer Experience Summit @ OpenWorld kicked off yesterday, bringing together established thought leaders and practitioners in customer experience. The first day saw noted marketing and customer experience thought leader, Seth Godin, take the stage to discuss how rapidly accelerating change and adoption are driving new behaviors and higher expectations in a massively disruptive transformation in which the customer now holds the power. His presentation gave us in-depth insight into this always-connected, always-sharing experience revolution we are witnessing.If you haven’t yet made it over to the Oracle Customer Experience Summit at The Westin St. Francis and the recently made over Oracle Square (aka Union Square), there’s still time today and tomorrow to network with industry peers and hear best practices from those who have steered their ventures through the disruptive trends of customer experience and have proven, successful strategies to share for driving strategic customer-centric initiatives. If you’re interested in learning how Oracle WebCenter helps businesses meet the demands of the customer experience revolution, be sure to check out these sessions at the Oracle Customer Experience Summit later today:Using the Online Customer Experience to Drive Engagement and Marketing Success Thursday, Oct 4, 4:15 PM - 5:15 PM - St. Francis - GeorgianMariam Tariq - Senior Director Product Management, Oracle Stephen Schleifer - Senior Principal Product Manager, Oracle Richard Backx - Business IT Architect/Consultant, KPN NL Netco CE Channels Online The online channel is a critical means of reaching and engaging customers. Online marketing efforts today must be targeted, interactive, and consistent to provide customers with a seamless experience. These efforts must include integrated management of Web, mobile, and social channels—supported by cross-channel customer data and campaigns—and integration with commerce to drive an engaging and differentiated online customer experience. Attend this session to learn how you can use the online channel to increase customer loyalty and drive the success of your marketing initiatives.Empowering Your Frontline Employees: Sales and Service Enterprise Collaboration Thursday, Oct 4, 5:30 PM - 6:30 PM - St. Francis - Elizabethan ABStephen Fioretti - VP, Product Management, Oracle Peter Doolan - Group Vice President, Sales Engineering, Oracle Andrew Kershaw - Sr Director Business Development, Oracle Marty Marcinczyk - VP Customer Experience Engineering, Comcast A focus on the employee experience is critical, because it can make or break your customers’ experiences, directly or indirectly. Engaged and empowered frontline employees become your best advocates and inspire your brand champions. This session explores proven approaches and tools, including social collaboration tools, that can help you empower and enable your frontline teams to improve customer and employee experiences.And before you go, you'll also want to explore the Innovation Tents in Oracle Square which feature leading-edge customer experience demonstrations; attend our customer journey mapping workshop; and learn at sessions focused on innovating differentiated experiences that drive cross-functional alignment.

    Read the article

  • w2k3 chkdsk errors as vmware 1.8 guest

    - by Sean Kirkpatrick
    We have two Dell servers (CentOS 5.x) hosting a variety of VMs including 3 W2K3 and 1 W2K servers as guests as well as a handful of other Linux guests. Each Windows VM has 2 drives, C: and D:. on 2 of the W2K3 and the W2K boxes we have recurring errors appearing on a daily basis as reported by CHKDSK. We'll run CHKDSK /f and reboot all affected machines and the errors are reported as fixed. The next day CHKDSK will report the same errors. None of the linux guests nor either host report errors when the are rebooted. The RAID controllers are not reporting errors. We're beginning to think that these are phantom errors somehow, but I'm not willing to go to the bank on that just yet. Anybody have similar experiences or advice? Thanks! Sean

    Read the article

  • How to Open Local File in AS3?

    - by Sean
    Hi, i have some code that looks like this function main9Click(event:MouseEvent):void { var main9URL:URLRequest = new URLRequest("N:\ICT\Nationals\Unit 2\Pages\Cars"); navigateToURL(main9URL, "_self"); } mainBtn6.addEventListener(MouseEvent.CLICK, main9Click); I need to make it open so when you click on that button it opens the file Cheers Sean

    Read the article

  • - (void)alertViewCancel:(UIAlertView *)alertView is not called

    - by Sean
    Hi all I've got the problem that the UIAlertViewDelegate method - (void)alertViewCancel:(UIAlertView *)alertView is not called when I cancel a AlertView with it's cancel button. Weird is that the delegate method - (void)alertView:(UIAlertView *)alertView clickedButtonAtIndex:(NSInteger)buttonIndex works perfectly. Does anyone have an idea? Thanks in advance Sean

    Read the article

  • Change URL of WebBrowser in C#

    - by Sean
    I am designing a simple application using c# and it has a web browser in it. I need to either (preferably) refresh the page that is currently inside the broswer, or navigate to a "new" url. I tried Browser.Url = new Uri("http://www.pandora.com/"); but I get an error when I try to compile it. Error 1 Cannot implicitly convert type 'string' to 'System.Uri' c:\users\sean\documents\visual studio 2010\Projects\Pandora\Pandora\Form1.cs 51 27 Pandora What am I doing wrong?

    Read the article

  • XAML ToolTip + IsHitTestVisible="False"

    - by Sean
    We need to have mouse clicks and drags "ignored" by our View1 but the ToolTip must still function in that view. The reason is View1 is above View2 in Z-Order, so View1 can tint View2 a red color and show a warning via ToolTip; however the ToolTip accompanying View1 will not work if IsHitTestVisible="False". Anyone know a work around so the ToolTip will display on mouse move/over and the rest of mouse events are ignored by View1 and go to View2? Thanks, Sean

    Read the article

  • uitableview delegate methods are not called

    - by Sean
    hi all i got the problem that the tableview methods are not called the first time the tableview is shown. if switch back to the previous view and then click the button to show the tableview again, the methods are called this time. i've to say that i show an actionsheet while the tableview is loading. the actionsheet i call in the ViewWillAppear method. thanks in advance sean

    Read the article

  • Regex to repeat a capture across a CDL?

    - by richardtallent
    I have some data in this form: @"Managers Alice, Bob, Charlie Supervisors Don, Edward, Francis" I need a flat output like this: @"Managers Alice Managers Bob Managers Charlie Supervisors Don Supervisors Edward Supervisors Francis" The actual "job title" above could be any single word, there's no discrete list to work from. Replacing the ,  with \r\n is easy enough, as is the first replacement: Replace (^|\r\n)(\S+\s)([^,\r\n]*),\s With $1$2$3\r\n$2 But capturing the other names and applying the same prefix is what is eluding me today. Any suggestions?

    Read the article

  • SEO techniques for a complete Flex Website

    - by Bobby Francis Joseph
    I am planning to build a website completely in Flex. All the contents will be static. No DB will be used. Unfortunately I am not building the website for PUMA or NIKE and so SEO is important. There is an overwhelming and confusing information out there about Flex and SEO. The following is a piece of information I found on the web " FLEX( Flash ) uses XML as a primary source of content, and XHTML is just a custom XML. The idea is to to use the HTML pages as XML content for the FLEX( Flash ) application. The XML can be read and indexed by the search engines, and it’s also the ideal content source for your FLEX( Flash ) application.' It goes on to explain how this can be done. Is this really that simple. " Could someone give some credible links. SEO is important for me since I am planning to build the site for a resort.

    Read the article

  • Why doesn't Gradle include transitive dependencies in compile / runtime classpath?

    - by Francis Toth
    I'm learning how Gradle works, and I can't understand how it resolves a project transitive dependencies. For now, I have two projects : projectA : which has a couple of dependencies on external libraries projectB : which has only one dependency on projectA No matter how I try, when I build projectB, gradle doesn't include any projectA dependencies (X and Y) in projectB's compile or runtime classpath. I've only managed to make it work by including projectA's dependencies in projectB's build script, which, in my opinion does not make any sense. These dependencies should be automatically attached to projectB. I'm pretty sure I'm missing something but I can't figure out what. I've read about "lib dependencies", but it seems to apply only to local projects like described here, not on external dependencies. Here is the build.gradle I use in the root project (the one that contains both projectA and projectB) : buildscript { repositories { mavenCentral() } dependencies { classpath 'com.android.tools.build:gradle:0.3' } } subprojects { apply plugin: 'java' apply plugin: 'idea' group = 'com.company' repositories { mavenCentral() add(new org.apache.ivy.plugins.resolver.SshResolver()) { name = 'customRepo' addIvyPattern "ssh://.../repository/[organization]/[module]/[revision]/[module].xml" addArtifactPattern "ssh://.../[organization]/[module]/[revision]/[module](-[classifier]).[ext]" } } sourceSets { main { java { srcDir 'src/' } } } idea.module { downloadSources = true } // task that create sources jar task sourceJar(type: Jar) { from sourceSets.main.java classifier 'sources' } // Publishing configuration uploadArchives { repositories { add project.repositories.customRepo } } artifacts { archives(sourceJar) { name "$name-sources" type 'source' builtBy sourceJar } } } This one concerns projectA only : version = '1.0' dependencies { compile 'com.company:X:1.0' compile 'com.company:B:1.0' } And this is the one used by projectB : version = '1.0' dependencies { compile ('com.company:projectA:1.0') { transitive = true } } Thank you in advance for any help, and please, apologize me for my bad English.

    Read the article

  • In which cases Robolectric is a relevant solution?

    - by Francis Toth
    As you may now, Robolectric is a framework that provides stubs for Android objects, in order to make tests runnable outside the Dalvik environment. My concern is that, by doing this, one can fake a third party library, which is, I believe, not a good practice (it should be encapsulated instead). If you make assumptions about an interface you don't own, which is changed once your test has been written, you won't be always noticed about the modifications. This can lead to a misunderstanding between your implementations and the interface they depends on. In addition, Android use mostly inheritance over interfaces which limits contract testing. So here's my question: Are there situations when Robolectric is the way to go? Here are some links you can check for further information: test-doubles-with-mockito in-brief-contract-tests

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >