Search Results

Search found 5864 results on 235 pages for 'secure gateway'.

Page 1/235 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Gateway IP for eth0 and gateway IP for pptp vpn are same

  - by user286630

  My problem is.. 1) I'm using laptop at school. 2) In school, the default gateway for ethernet is 192.168.1.1. 3) I want to connect to a pptp vpn server. The gateway over the vpn connection is also 192.68.1.1. (The VPN server assigns 192.168.100.1 to my laptop and I confirmed that it is not used in school.) In this situation, there is no problem in Windows 7. I think it is enough smart to distinguish two different gateways with the same IP. All connection requests may be forwarded to the vpn gateway. But, in Ubuntu, I cannot access a file server in the remote site. I guess every connection request is forwarded to the ethernet gateway. How can I send all connection requests to the vpn gateway whose IP is same as the ethernet gateway?

  Read the article

• Accessing two networks connected to gateway from behind the gateway

  - by Babar

  I have a Windows XP machine acting as internet gateway. It is connected to two different networks, one, say LAN1, connects to internet and other, say LAN2, to outside LAN. My machine is sitting behind the gateway. I have set up internet connection sharing on LAN1 and can access internet on my machine but i can't access anything from LAN2. Is it possible to access internet from LAN1 and yet be able to access PC's on LAN2? -------------- --------- | Lan 1 | | Lan 2 | | (Internet) | --------- -------------- ^ ^ | | | -------------------------- | Win XP Gateway | -------------------------- ^ | -------------- | My Machine | -------------- EDIT: Gateway is equipped with 3 lan sockets, two are connected to Lan 1 & 2, third one is connected to switch. And my machine also connects to that same switch.

  Read the article

• DHCP server with multiple interfaces on ubuntu, destroys default gateway

  - by Henrik Alstad

  I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

  Read the article

• Remote Desktop Services Gateway Issue

  - by AVandelay05

  Alright fellow techies here's the rundown. I have installed Server 2008 r2 Remote Dekstop Services on a VM in my network. I installed the following RD role services: RD Session Host, Licensing, Connection Broker, Gateway, Web Access. When I set things up originally, the gateway server and RDWeb worked as it should locally. After getting things running locally (remoteserver.domainname.local) I wanted to test things externally. From the outside, I couldn't get things running (meaning I could connect to rdweb access externally, but when I tried to run an app I would get the message "can't connect/find computer"). Here's my setup for external access The VM has every RD Services role services installed on it, meaning it acts as gateway, rd web access, session host, licensing, the whole bit. I made a self-signed certificate on the gateway server (gateway.domainname.net is the cert name). Internally, I have a secondary forward-lookup zone called domainname.net with an A record gateway pointing to the local IP of the gateway server. On our public DNS (domainname.net) I have an A record gateway. This is to access the RDWeb externally. In IIS I have the following authentication settings RDWeb: All disabled except for anonymous authentication Rpc: All disabled except for basic and windows RpcWithCert: All disbled except for windows authentication I have the necessary web access config in our sonicwall tz210 (https and rdp, external ip pointing to local ip of rds server) RAP and CAP have the correct user and computer groups, authentication, and allowed devices After all of this, here's what happens accessing externally. I can login correctly to RDWeb Access (I've tried a bogus login, I can't login to it so that's working properly). I see the Apps for use. I click on an app, click connect, the credential window opens, I put in the correct user creds, it tries to connect to the gateway server, but then the cred window comes back in view. I tried to reach a limit of failed logins, but never reached one, haha. So from the same external client machine I try to connect to the gateway through a Remote Desktop connection. I put in the correct gateway settings in the RD window, try to connect and get the same results as I did in RDWeb access. I checked the event logs on the RD Services machine and saw the following event IDs around the time I tried to login externally: ID 6037 with the message "The program svchost.exe, with the assigned process ID 2168, could not authenticate locally by using the target name host/gateway.domainname.net. The target name used is not valid. A target name should refer to one of the local computer names, for example, the DNS host name. Try a different target name." ID 10 RADWebAccess "RD Web Access was unable to access gateway.domainname.net, which is the server that is specified as running the RemoteApp and Desktop Connection Management service. Ensure that the computer account of the RD Web Access server is a member of the TS Web Access Computers security group on gateway.domainname.net" ID 4625 "An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Administrator Account Domain: gateway.domainname.net Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: USER-LAPTOP Source Network Address: External IP Source Port: 63125 Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols." I don't think the VM has a null SID. The SID of the VM and it's physical host have different SIDS. I can access the blank page for rpc externally using the external gateway name. It seems like authentication is a problem. Also, is it a problem that the external name of the gateway server doesn't match the local name? The external name (which the cert is based on) is gateway.domainname.net and the internal name is remoteserver.domainname.local. That's the only thing I can think of that would be the problem, but the external name has to be different from the local right? Internally, I ping gateway.domainname.net and it gives me the correct local IP of the server. Now, there isn't an actual computer name in AD, but I don't know how I would achieve that? I hope I've been clear....any help would be appreciated. I think I'm close to achieving this. :)

  Read the article

• Running 12.04 as a gateway - resolvconf, dhclient and dnsmasq integration

  - by Adam

  I have a gateway server which is set up originally with Ubuntu desktop 12.04 - perhaps a mistake, I don't know, something to bear in mind. I ripped out network-manager and now want to get resolvconf, dhclient and dnsmasq to play well together. dhclient gets the gateway's eth0 WAN ip address and the ISP DNS name server from the modem. dnsmasq needs to serve dhcp to the rest of the lan on eth1 and acts as a DNS cache both for the lan and for the gateway machine. I also set up iptables as a firewall. Right now, the gateway's /etc/resolv.conf shows only name server = 127.0.0.1 which is correct AFAIK. However I don't think that dhclient is giving dnsmasq the ISP DNS name server nor is dnsmasq picking up the OpenDNS and Google name servers I specified in /etc/network/interfaces - at the moment look-ups, i.e. ping or surfing, don't work unless I manually edit /etc/resolv.conf to put in an upstream name server like 8.8.8.8 So I removed the resolvconf package. Now I'm not getting dhcp on my lan and I'm not able to do DNS look-ups on the host itself - I can surf and ping on the net, but not 127.0.0.1. Where do I go from here? This setup with the config for dhclient and dnsmasq, and the same resolv.conf and hosts files worked on my old debian box.

  Read the article

• Finding a Payment Gateway?

  - by Lynda

  I have a client who would like to sell glass pipes online. The problem I run into is with the payment gateway. Glass pipes fall into two categories drug paraphernalia or tobacco product. This leads me to here and asking: Does anyone know of a payment gateway that will process payments for glass pipes? Note: Doing some Google searching I read that Authorize.net will accept tobacco but when I spoke with them they said they do not.

  Read the article

• Oracle Secure Global Desktop - Business Continuity During Snowstorm!

  - by Mohan Prabhala

  Capgemini, one of the world's largest management consulting, outsourcing and professional services companies, is an Oracle Secure Global Desktop customer and uses it to provide secure, remote access to 1) corporate applications centralized in the datacenter and 2) desktops hosted on Oracle VDI. Earlier this month, one of Capgemini's government customers in Holland were advised to avoid traveling to work, due to a heavy snowstorm. This resulted in a lot of employees working from home. Thankfully due to their deployment of the Oracle Secure Global Desktop gateway, employees were able to easily access their corporate applications and desktops from home and anywhere outside of their office. Capgemini reports that during the days of the snowstorm, a record number of users leveraged Oracle Secure Global Desktop (servers and gateway). Despite this record usage, Oracle Secure Global Desktop remained perfectly stable and allowed users to seamlessly access their applications and desktops. This is a great example of how Oracle Secure Global Desktop allows employee productivity and business continuity even during severe weather conditions such as snowstorms. We are delighted to have enabled business continuity for Capgemini's customers, and look forward to our continued relationship with Capgemini. This blog has been approved for posting by Capgemini.

  Read the article

• Force Windows Local Subnet Traffic through a Gateway

  - by Beerey

  Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

  Read the article

• Windows 7 DHCP Default Gateway not Overridden by manual Default Gateway

  - by dgwilson

  We have recently installed Windows 7 for student computers. All student computers must be routed through our content filter which is located at 192.168.0.63. This was done in WinXP by adding a Default Gateway in the network adapter settings TCP/IP Properties Advanced Default Gateway. All teacher computers are routed through the DHCP assigned Default Gateway of 192.168.0.1. In WinXP the dhcp default gateway was correctly overridden by this manual setting. In Win7 it appears that the dhcp default gateway is retained and the manual one is added to the list so that there are two with the dhcp one having the primary metric. I have tried several ways to remove the dhcp default gateway such as, running the "route delete 0.0.0.0 192.168.0.1" command. Doing this from an administrator command prompt works but it just resets upon reboot. I've tried adding this command to the registry's Run section but it seems to run as a non-administrator and therefore will not complete successfully. Is there any way to prevent this and force the manual default gateway to override the dhcp one? Or to remove the dhcp assigned one automatically on boot/login? HELP! We CANNOT allow student computers to connect to the internet without going through the content filter.

  Read the article

• Windows 7 DHCP Default Gateway not Overridden by manual Default Gateway

  - by dgwilson

  We have recently installed Windows 7 for student computers. All student computers must be routed through our content filter which is located at 192.168.0.63. This was done in WinXP by adding a Default Gateway in the network adapter settings TCP/IP Properties Advanced Default Gateway. All teacher computers are routed through the DHCP assigned Default Gateway of 192.168.0.1. In WinXP the dhcp default gateway was correctly overridden by this manual setting. In Win7 it appears that the dhcp default gateway is retained and the manual one is added to the list so that there are two with the dhcp one having the primary metric. I have tried several ways to remove the dhcp default gateway such as, running the "route delete 0.0.0.0 192.168.0.1" command. Doing this from an administrator command prompt works but it just resets upon reboot. I've tried adding this command to the registry's Run section but it seems to run as a non-administrator and therefore will not complete successfully. Is there any way to prevent this and force the manual default gateway to override the dhcp one? Or to remove the dhcp assigned one automatically on boot/login? HELP! We CANNOT allow student computers to connect to the internet without going through the content filter.

  Read the article

• Wubi on Windows 8 without secure boot?

  - by emersonhsieh

  I have a MacBook Pro. I've heard rumours that if Windows 8 is going to have this thing called "Secure boot", Wubi cannot work. At first I plan to install Ubuntu on my mac via Wubi(and windows via bootcamp), but since I can't find my Windows 7 Installation CD, I installed Windows 8 on my Mac and installed Ubuntu on a VM. Then suddenly Windows 8 Release Preview was released today so I decided to install over my existing copy of Windows 8 Consumer Preview. When I went to the Windows 8 Upgrade assistant, it said that the firmware on my Mac doesn't support Secure booting. I don't even know what it means, but since the Upgrade assistant said that the Mac cannot support secure booting, can I install Wubi successfully? And what is secure booting anyways? Any help will be appreciated.

  Read the article

• Solution for payment gateway with multiple sellers

  - by pvieira

  I'm looking for a payment gateway that can be used in a website with multiple sellers. Let's say that depending on the purchased item, a given seller/merchant should receive the money. Would that be possible using only one "master merchant" account that would act as a "distributor" of funds for several "sub-merchants"? Does any well established privider (paypal, worldpay, auth.net, etc) supports this?

  Read the article

• Solution for payment gateway with multiple sellers

  - by pvieira

  I'm looking for a payment gateway that can be used in a website with multiple sellers. Let's say that depending on the purchased item, a given seller/merchant should receive the money. Would that be possible using only one "master merchant" account that would act as a "distributor" of funds for several "sub-merchants"? Does any well established privider (paypal, worldpay, auth.net, etc) supports this?

  Read the article

• Secure Networks Require Secure Web Gateways

  Most IT shops have handled the e-mail threat but overlook the rise of the Web as today's primary attack vector. Secure Web gateways that know better than to trust "good" sites will be key to addressing that oversight.

  Read the article

• Unable to ping inside or outside network with default gateway 0.0.0.0

  - by agentroadkill

  I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

  Read the article

• openvpn does not recover from disabling redirect-gateway

  - by Marki

  When I enable the redirect-gateway option on the server, restart openvpn, and restart the client software, the new default gateway is set on the client. When I then disable the redirect-gateway option in the server config, restart openvpn on the server, then on the client, the client no longer sets the old gateway, effectively breaking access to the outside world. Why could this be?

  Read the article

• debian gateway using iptables

  - by meijuh

  I am having problems setting up a debian gateway server. My goal: Having eth1 the WAN interface. Having eth0 the LAN interface. Allow both ports 22 (SSH) and 80 (HTTP) accessed from the outside world on the gateway (SSH and HTTP run on this server). What I did was the following: Create a file /etc/iptables.rules with contents: /etc/iptables.rules: *nat -A POSTROUTING -o eth1 -j MASQUERADE COMMIT *filter -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth1 -j DROP COMMIT edit /etc/network/interfaces as follows: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.rules auto eth0 allow-hotplug eth0 iface eth0 inet dhcp #auto eth1 #allow-hotplug eth1 #iface eth1 inet dhcp allow-hotplug eth1 iface eth1 inet static address 217.119.224.51 netmask 255.255.255.248 gateway 217.119.224.49 dns-nameservers 217.119.226.67 217.119.226.68 Uncomment the rule net.ipv4.ip_forward=1 in /etc/sysctl.conf to allow packet forwarding. The static settings for eth1 such as the ip address I got from my router (which I want to replace); I simply copied these. I have a (windows) DNS + DHCP server on ip address 10.180.1.10, which assigns ip address 10.180.1.44 to eth0. What this server does is not really interesting it only maps domain names on our local network and assigns one static ip to the gateway. What works: on the gateway itself I can ping 8.8.8.8 and google.nl. So that is okey. What does not work: (1) Every machine connected to eth0 (indirectly via a switch) can not ping an ip or a domain. So I guess the gateway can not be found. (2) Also when I configure my linux machine (a laptop) to use a static ip 10.180.1.41, a mask and a gateway (10.180.1.44) I can not ping an ip or domain either. This means that maybe my iptables is incorrect of not loaded correctly. Or I maybe have to configure my DNS/DHCP on my windows machine. I have not reset the windows machine net, restart the DNS/DHCP services, should I do this? I did not install dnsmasq as desribed here: http://blog.noviantech.com/2010/12/22/debian-router-gateway-in-15-minutes/. I don't think this is necessary?

  Read the article

• Windows 7 Default Gateway problem

  - by Matt

  Hi, I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

  Read the article

• how to get gateway address

  - by brknl

  I am trying to get gateway address but when i call "route -n" I expect to see something like that Destination Gateway Genmask Flags 0.0.0.0 dnsip 0.0.0.0 UG 0 0 0 eth0 but I only see the flag U ones and gateway ip is 0.0.0.0. When i look /etc/sysconfig/network/routes i can see the gateway address. I can not use that file because not every versions of open suse have that file. So i need to use a common way to find out the gateway addres.

  Read the article

• ANNOUNCEMENT: Windows Server Certified As Oracle Secure Global Desktop Clients With Oracle E-Business Suite 12

  - by Mohan Prabhala

  We are proud to announce the certification of Oracle Secure Global Desktop for use with Microsoft Windows Server 2003 and 2008 virtualized environments acting as desktop clients connecting to Oracle E-Business Suite Release 12 environments.  32-bit and 64-bit versions of Microsoft Windows Server are certified. These combinations may also be used in conjunction with Oracle VM, if required. Oracle E-Business Suite customers and partners may now use Oracle Secure Global Desktop as an access layer for Oracle Applications, knowing that Oracle fully certifies this particular scenario. For more details, please refer to this Oracle E-Business Suite Technology blog or My Oracle Support (Note 1491211.1)

  Read the article

• All Secure: "Secure Testimony"

  Advising the United States Congress about cybersecurity

  Read the article

• Payment Gateway options other than Paypal, for sending out mass payments

  - by Rishav Rastogi

  We were using Paypal Payment pro earlier for the same thing, but for some reason Paypal has been given some new guideline which kinda hinder with the way we need to send out payments at the moment. We receive payments from clients and then send out payments back to vendors on a weekly basis ( deducting our cut ). Can you let me know what options are available to for such transactions other than paypal ? which is the best in terms cost of setup etc. Thanks

  Read the article

• scp through ssh gateway connection

  - by zidarsk8

  so my network layou is something like this (I don't have enough reputation to post images so here's the link) http://i.imgur.com/OaD4i.png now Alice has access to SSH gateway (just gateway from now on) with: ssh [email protected] and the authorized keys file on the gateway looks like this #/home/Alice/.ssh/authorized_keys command="ssh -t alice@web" ssh-rsa ABCD...E== alice@somehost so when Alice trys to connect to the Gateway with her private key, she actually gets connected to the Web server (the gateway pc can make a connection to the web server with a passwordless private key, so that stays transparent). The question 1) How can I set this up so that Alice will be able to scp things to web server too? 2) I know this makes a separete connection, but is there any way for this to work as a normal ssh so that even something like -R12345:localhost:22 would work?

  Read the article

• Linux route add between static LAN and Wifi Gateway

  - by Hamza

  I have two local machines connected to each other via wired ethernet and one of those machines is also connected to a wifi network which provides internet access. A pseudo-graphical representation of the topology is as follows: (PC2)----------(PC1)---------(Wifi Gateway) 192.168.2.x 10.0.0.x The configuration on PC2 is: iface eth0 inet static address 192.168.2.2 network 192.168.2.0 netmask 255.255.255.0 gateway 192.168.2.1 ...and the configuration on PC1 is: iface eth0 inet static address 192.168.2.1 network 192.168.2.0 netmask 255.255.255.0 gateway 192.168.2.1 On PC1, I've added a default route for wlan0 as I couldn't access the internet otherwise: route add default gw 10.0.0.1 wlan0 And also tried setting the gateway for the 192.168.2.x network using: route add -net 192.168.2.0 netmask 255.255.255.0 gw 10.0.0.1 But I still can't access internet from PC2. Edit I don't have access to the wifi gateway.

  Read the article

• Windows 7 Default Gateway problem

  - by Matt

  I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >