Search Results

Search found 22 results on 1 pages for 'shaul'.

Page 1/1 | 1 

  • How to get Word 2003 to make my print layout go from left to right?

    - by Shaul
    My copy of MS Word 2003 was installed on my computer with the locale set to Israel, so among other things my Normal.dot template was set up for right-to-left. I managed to fix most of the Hebrew support things so that I am working in English by default now. The only thing I haven't found a cure for is how to make the "print layout" view also go from left to right; as things are, the page flow always appears from right to left, even in English documents - IOW, page 1 appears on the right of page 2, as shown below. I can't see any obvious option to change this. How do I do it?

    Read the article

  • Creating self-signed SSL certificate - Access denied?

    - by Shaul
    I'm trying to create a Self-Signed Certificate in IIS 7 (Win7 Ultimate x64), and getting the following error: I found this question on SF, which says I should set permissions on the C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys folder to allow rights - but that's also not working. Firstly, note that "Everyone" has "Full Control" rights: And when I try to delete and recreate rights, look what comes up: I am logged in as a user with admin privileges, and I've even tried running Explorer with Admin rights... nothing seems to help. What do I do to get this right?

    Read the article

  • What's wrong with my MAC address?

    - by Shaul
    I have a D-Link DSL-2650U router, and exactly one computer on the network. For reasons of port forwarding I want to give my computer a static internal IP address, so that I don't take the chance of losing my NAT settings every time the computer reboots. So here's a screen shot that summarizes the entire problem: WTH is wrong with my MAC address? It's copied and pasted from the command prompt window! I tried editing out the dashes, but it still doesn't work. Am I doing something wrong, or is there a bug in the D-Link firmware?

    Read the article

  • RDP connections keep dropping

    - by Shaul
    I have an odd problem on my notebook (HP Pavilion dv7). My Internet connection seems OK for the most part. But lately I've been having trouble with Remote Desktop connections. While I can connect to remote computers, the connection is very flaky, and usually drops after a few seconds. Sometimes it'll successfully reconnect automatically, and sometimes not. But even after successful reconnection, it'll just drop again after a few seconds. This appears to be independent of which RDP host I'm connecting to, and which network I'm connected to locally, whether wireless or wired. Other remote control apps like TeamViewer and Ammyy seem to work fine. Any ideas?

    Read the article

  • How to get full write permission on my second drive after dual boot?

    - by Shaul
    I had a WinXP installation on my hard drive. Then I bought a 2nd drive and installed Win7. Dual boot working fine. But when I'm in the Win7 environment, it appears that I don't have full admin permission on the "D" drive (that's the drive with WinXP). Even though the user I'm logged in as has admin permissions, I have to run my apps with administrator privileges in order to get write access to the D drive. This is not the case when I do stuff on the C drive. I could just get into running those apps that access the D drive in admin mode, but that seems like overkill. Is there some secret switch I can flip so that my D drive acts like my C drive, security-wise?

    Read the article

  • Unable to launch the ASP.NET Development server because port '1900' is in use.

    - by Shaul
    I don't know what has got into my computer today. I was developing just fine in VS 2008 and testing my ASP.NET web site on my development server. Then suddenly, out of the blue, I can't run my web site any more! As soon as I hit F5, the message appears: Unable to launch the ASP.NET Development server because port '1900' is in use. And it doesn't matter what port I change to, it's always in use! AAARRRGGGHH!!! I have tried: Changing the port number Restarting Visual Studio Rebooting my machine Installing IIS Clue: My IIS refuses to start. But I didn't have IIS installed when I was happily working earlier, so that is probably not the issue; it might just be highlighting something else... Thanks in advance... Update: after rebooting, IIS does start, but the problem here persists.

    Read the article

  • How do I convert Word files to PDF programmatically?

    - by Shaul
    I have found several open-source/freeware programs that allow you to convert .doc files to .pdf files, but they're all of the application/printer driver variety, with no SDK attached. I have found several programs that do have an SDK allowing you to convert .doc files to .pdf files, but they're all of the proprietary type, $2,000 a license or thereabouts. Does anyone know of any clean, inexpensive (preferably free) programmatic solution to my problem, using C# or VB.NET? Thanks!

    Read the article

  • How to do fixed price quote for design sessions?

    - by Shaul
    Normally when I do a system for a customer, I do design sessions on an hourly rate and then come out with a fixed price quotation for the full system development. Now this customer has thrown me a curveball: he doesn't want an hourly rate for design, either - he wants me to quote a fixed price to do all the design, too! Not that he's trying to cheap out, but he doesn't want to be in a situation where the longer design stretches out, the more he has to pay - and I can understand that. For the business layer it was actually not too difficult to work with this, because from his original functional spec I got a good idea of what the core business objects were, and in our design agreement I defined several objects which would be covered by a fixed design price; if any new non-trivial objects were discovered, they would be considered variances, and those would be billed on an hourly rate. So far so good. But when it comes to the UI, things start getting a lot more woolly. How many screens will there be? Don't know yet. What's going to be on each screen? Don't know yet. All we know is that it's a "dashboard" type of system, and there will be a lot of visual reporting involved e.g. gauges, graphs, etc. So maybe make it fixed price per screen design? Not a great definition; he might say that everything is going to be on one screen. Maybe a price per "visual report" design, including ability to slice & dice? Again not so easy - it might be that the entire system is just one report, and all the intelligence is going to go into how to present that segmentation. Anyone have any ideas how to do a fixed price quotation for a UI design like this?

    Read the article

  • Can you recommend an effective and cheap CDN for video streaming?

    - by Shaul Dar
    I am looking for a streaming CDN recommendation. Cost and performance are my chief concerns. Video viewers may be all over the globe, with the, US, Europe, Russia and South America topping the list (yes, I know that leaves out a little :-). I saw the following list of streaming CDNs in LinkedIn: Akamai, BitGravity, EdgeCast, Highwinds, Internap, Level3, Limelight, Mirror Image, Move Networks, Qbrick, SimpleCDN, StreamZilla, Swarmcast (streaming via HTTP), WINK Streaming... (+Amazon's S3 and CloudFront) Can anyone recommend any of these or others? Or a different type of technology (e.g. P2P).

    Read the article

  • FCKEditor doesn't set Value property on postback!

    - by Shaul
    I'm using FCKEditor on my asp.net web page. It appears beautifully, and the editor looks really good on the front end. Only problem is, the .Value property is not being set on the postback. No matter what changes the user makes to the value of the control on the page, when I click "Submit", the .Value property remains blank. I have Googled for other solutions, and most of them are of the variety where there's some conflict with Ajax, such as this and this. My problem is not solved by these solutions; it's much more fundamental than that. I'm not doing anything to do with Ajax; I'm just a simple asp.net newbie with a simple web form, and the value property is not being set on postback, not in IE and not in FF. It appears that at least one other person has had this problem, but no solution yet. Any ideas? Thanks! New information: I tried this out on a "hello world" test web site - and the test web site works 100%. There is obviously a problem on my page, but I have no idea where to begin tracking this down. Here's the markup of my page, in case anyone can see anything obvious that my newbie eyes can't: <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="EmailTemplateEditForm.aspx.vb" Inherits="EEI_App.EmailTemplateEditForm" %> <%@ Register Assembly="FredCK.FCKeditorV2" Namespace="FredCK.FCKeditorV2" TagPrefix="FCKeditorV2" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title>EEI - Email Template</title> <link rel="stylesheet" href="EEI.css"> <script language="javascript" id="jssembleWare" src="sembleWare.js"></script> <style type="text/css"> .style1 { height: 251px; } .style2 { width: 2%; height: 251px; } .style3 { height: 490px; } </style> </head> <body> <form id="form1" runat="server"> <%@ register src="header.ascx" tagname="header" tagprefix="uc1" %> <%@ register src="footer.ascx" tagname="footer" tagprefix="uc1" %> <uc1:header ID="header1" runat="server" /> <!-- main content area --> <div class="content"> <!-- title of the page --> <div class="boxheader"> Email Template </div> <div class="standardbox"> <!-- Start Page Main Contents--> <!-- error messages --> <div class="errorbox"> <asp:Label ID="lblError" CssClass="ErrorControlStyle" runat="server" EnableViewState="False" Width="100%"></asp:Label> </div> <table class="contenttable"> <tr> <td align="left" valign="top" class="style3"> <div class="actionbox"> <div class="navheadertitle"> Navigation</div> <ul> <li> <asp:LinkButton ID="btnSubmit" CssClass="LinkButtonStyle" runat="server">Submit</asp:LinkButton> </li> <li> <asp:LinkButton ID="btnCancel" CssClass="LinkButtonStyle" runat="server" CausesValidation="false">Cancel</asp:LinkButton> </li> </ul> </div> </td> <td align="left" valign="top" class="style3"> <p> </p> <table> <tr class="MCRSFieldRow"> <td class="MCRSFieldLabelCell"> <asp:Label ID="lblEmailTemplate_TemplateName" CssClass="LabelStyle" runat="server" Width="175">Template Name</asp:Label> </td> <td class="MCRSFieldEditCell"> <asp:TextBox ID="txtEmailTemplate_TemplateName" CssClass="TextBoxStyle" runat="server" Width="100%"></asp:TextBox> </td> <td class="MCRSFieldLabelCell"> <asp:Label ID="lblEmailTemplate_TemplateType" CssClass="LabelStyle" runat="server" Width="175">Template Type</asp:Label> </td> <td class="MCRSFieldEditCell"> <asp:RadioButtonList ID="rblEmailTemplate_TemplateType" CssClass="RadioButtonListStyle" runat="server" RepeatColumns="1" RepeatDirection="Horizontal" Width="135px"> <asp:ListItem Value="1">Cover Letter</asp:ListItem> <asp:ListItem Value="2">Email</asp:ListItem> </asp:RadioButtonList> </td> <td class="MCRSRowRightCell"> &nbsp; </td> </tr> <tr class="MCRSFieldRow"> <td class="MCRSFieldLabelCell"> Composition Date </td> <td class="MCRSFieldEditCell"> <asp:Label ID="lblEmailTemplate_CompositionDate" CssClass="ElementLabelStyle" runat="server" Width="175"></asp:Label> </td> <td class="MCRSFieldLabelCell"> Last Used Date </td> <td class="MCRSFieldEditCell"> <asp:Label ID="lblEmailTemplate_LastUsedDate" CssClass="ElementLabelStyle" runat="server" Width="175"></asp:Label> </td> <td class="MCRSRowRightCell"> &nbsp; </td> </tr> <tr class="MCRSFieldRow"> <td class="MCRSFieldLabelCell"> Composed By </td> <td class="MCRSFieldEditCell" colspan="3"> <asp:Label ID="lblPerson_FirstNames" CssClass="ElementLabelStyle" runat="server"></asp:Label> <asp:Label ID="lblPerson_LastName" CssClass="ElementLabelStyle" runat="server"></asp:Label> </td> <td class="MCRSRowRightCell"> &nbsp; </td> </tr> <tr class="MCRSFieldRow"> <td class="MCRSFieldLabelCell"> <asp:Label ID="lblEmailTemplate_Subject" CssClass="LabelStyle" runat="server" Width="175">Subject</asp:Label> </td> <td class="MCRSFieldEditCell" colspan="3"> <asp:TextBox ID="txtEmailTemplate_Subject" CssClass="TextBoxStyle" runat="server" Width="100%"></asp:TextBox> </td> <td class="MCRSRowRightCell"> &nbsp; </td> </tr> <tr class="MCRSFieldRow"> <td class="style1"> <asp:Label ID="lblEmailTemplate_Body" CssClass="LabelStyle" runat="server" Width="175">Body</asp:Label> </td> <td class="style1" colspan="3"> <FCKeditorV2:FCKeditor ID="FCKeditor1" runat="server" Height="500px"> </FCKeditorV2:FCKeditor> </td> <td class="style2"> &nbsp; </td> </tr> </table> </td> </tr> </table> </div> <p> <a class="InputButtonStyle" href="#_swTopOfPage">Top of Page</a> </p> </div> <uc1:footer ID="footer1" runat="server" /> <p> <asp:TextBox ID="txtEmailTemplate_Body" CssClass="TextAreaStyle" Rows="4" runat="server" Width="100%" Height="16px" Visible="False"></asp:TextBox> </p> </form> </body> </html>

    Read the article

  • Updating nullability of columns in SQL 2008

    - by Shaul
    I have a very wide table, containing lots and lots of bit fields. These bit fields were originally set up as nullable. Now we've just made a decision that it doesn't make sense to have them nullable; the value is either Yes or No, default No. In other words, the schema should change from: create table MyTable( ID bigint not null, Name varchar(100) not null, BitField1 bit null, BitField2 bit null, ... BitFieldN bit null ) to create table MyTable( ID bigint not null, Name varchar(100) not null, BitField1 bit not null, BitField2 bit not null, ... BitFieldN bit not null ) alter table MyTable add constraint DF_BitField1 default 0 for BitField1 alter table MyTable add constraint DF_BitField2 default 0 for BitField2 alter table MyTable add constraint DF_BitField3 default 0 for BitField3 So I've just gone in through the SQL Management Studio, updating all these fields to non-nullable, default value 0. And guess what - when I try to update it, SQL Mgmt studio internally recreates the table and then tries to reinsert all the data into the new table... including the null values! Which of course generates an error, because it's explicitly trying to insert a null value into a non-nullable column. Aaargh! Obviously I could run N update statements of the form: update MyTable set BitField1 = 0 where BitField1 is null update MyTable set BitField2 = 0 where BitField2 is null but as I said before, there are n fields out there, and what's more, this change has to propagate out to several identical databases. Very painful to implement manually. Is there any way to make the table modification just ignore the null values and allow the default rule to kick in when you attempt to insert a null value?

    Read the article

  • How/when to hire new programmers, and how to integrate them?

    - by Shaul
    Hiring new programmers, especially in a small company, can often present a Catch-22 situation. We have too much work to do, so we need to hire new programmers. But we can't hire new programmers now, because they will need mentoring and several months of learning curve in your industry/product/environment before they're useful, and none of the programmers has time to be a mentor to a new programmer, because they're all completely swamped with the current work load. That may be a slightly frivolous way of describing the situation, but nevertheless, it's difficult for a small company on a tight budget to justify hiring someone who is not only going to be unproductive for a long time, but will also take away from the performance of the current programmers. How have you dealt with this kind of situation? When is the best time to hire someone? What are the best tasks to assign to a new team member so that they can learn their way around your code base and start getting their hands dirty as quickly as possible? How do you get the new guy useful without bogging your existing programmers down in too much mentoring? Any comments & suggestions you have are much appreciated!

    Read the article

  • What's the funniest user request you've ever had?

    - by Shaul
    Users sometimes come up with the most amusing, weird and wonderful requirements for programmers to design and implement. Today I read a memo from my boss that we need the "ability to import any excel or access data, irrespective of size, easily and quickly." From the same memo, we have a requirement to "know if anyone unauthorized accessed the system" - as if a hacker is going to leave his calling card wedged between an index and a foreign key somewhere. I think my boss has been watching too much "Star Trek"... :) What's the funniest user request you've ever had?

    Read the article

  • Duplex communication using NetTcpBinding - ContractFilter mismatch?

    - by Shaul
    I'm making slow and steady progress towards having a duplex communication channel open between a client and a server, using NetTcpBinding. (FYI, you can observe my newbie progress here and here!) I'm now at the stage where I have successfully connected to my server, through the server's firewall, and the client can make requests of the server. In the other direction, however, things aren't quite so happy. It works fine when testing on my own machine, but when testing over the internet, when I try to initiate a callback from the server side, I get an error: The message with Action 'http://MyWebService/IWebService/HelloWorld' cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport, None). Here are some of the key bits of code. First, the web interface: [ServiceContract(Namespace = "http://MyWebService", SessionMode = SessionMode.Required, CallbackContract = typeof(ISiteServiceExternal))] public interface IWebService { [OperationContract] void Register(long customerID); } public interface ISiteServiceExternal { [OperationContract] string HelloWorld(); } Then, on the client side (I was fiddling with these attributes without really knowing what I'm doing): [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerSession, Namespace="http://MyWebService")] class SiteServer : IWebServiceCallback { string IWebServiceCallback.HelloWorld() { return "Hello World!"; } ... } So what am I doing wrong here? EDIT: Adding app.config code. From server: <system.serviceModel> <diagnostics> <messageLogging logMalformedMessages="true" logMessagesAtServiceLevel="true" logMessagesAtTransportLevel="true" logEntireMessage="true" maxMessagesToLog="1000" maxSizeOfMessageToLog="524288" /> </diagnostics> <behaviors> <serviceBehaviors> <behavior name="mex"> <serviceDebug includeExceptionDetailInFaults="true"/> <serviceMetadata/> </behavior> </serviceBehaviors> </behaviors> <services> <service name ="MyWebService.WebService" behaviorConfiguration="mex"> <endpoint address="net.tcp://localhost:8000" binding="netTcpBinding" contract="MyWebService.IWebService" bindingConfiguration="TestBinding" name="MyEndPoint"></endpoint> <endpoint address ="mex" binding="mexTcpBinding" name="MEX" contract="IMetadataExchange"/> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:8000"/> </baseAddresses> </host> </service> </services> <bindings> <netTcpBinding> <binding name="TestBinding" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" portSharingEnabled="false"> <readerQuotas maxDepth="32" maxStringContentLength ="8192" maxArrayLength ="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384"/> <security mode="None"/> </binding> </netTcpBinding> </bindings> </system.serviceModel> and on the client side: <system.serviceModel> <bindings> <netTcpBinding> <binding name="MyEndPoint" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" transactionFlow="false" transferMode="Buffered" transactionProtocol="OleTransactions" hostNameComparisonMode="StrongWildcard" listenBacklog="10" maxBufferPoolSize="524288" maxBufferSize="65536" maxConnections="10" maxReceivedMessageSize="65536"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="None"> <transport clientCredentialType="Windows" protectionLevel="EncryptAndSign"> <extendedProtectionPolicy policyEnforcement="Never" /> </transport> <message clientCredentialType="Windows" /> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint address="net.tcp://mydomain.gotdns.com:8000/" binding="netTcpBinding" bindingConfiguration="MyEndPoint" contract="IWebService" name="MyEndPoint" /> </client> </system.serviceModel>

    Read the article

  • WCF: connecting to service over internet times out

    - by Shaul
    Still on the WCF learning curve: I've set up a self-hosted WCF Service (WSDualHttpBinding), which works fine on my own computer, which resides behind a firewall. If I run the client on my own computer, everything works great. Now I installed the client on a computer outside my network, and I'm trying to access the service via a dynamic DNS, like so: http://mydomain.dyndns.org:8000/MyService. My port forwarding issues were taken care of in a previous question; I can now see the service is up in my browser. But now when I try to run the client on the other machine, I get the following error message: "The open operation did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout." I have disabled security on the service, so that's not it. What else might be preventing the connection from happening?

    Read the article

  • Installing a Windows Service from a separate GUI - how to install .config file along with it?

    - by Shaul
    I have written a GUI (call it MyGUI) for ClickOnce deployment on any given client site. That GUI installs and configures a Windows Service (MyService), using the method described here by @Marc Gravell. Here's my code, run from inside MyGUI, which contains a reference to MyService: using (var inst = new AssemblyInstaller(typeof(MyService.Program).Assembly, new string[] { })) { IDictionary state = new Hashtable(); inst.UseNewContext = true; try { if (uninstall) { inst.Uninstall(state); } else { inst.Install(state); inst.Commit(state); } } catch { try { inst.Rollback(state); } catch { } throw; } } Take note of that first line: I'm grabbing the assembly for MyService, and installing that. Now, trouble is, the way I've done the deployment, I'm effectively referencing the service's EXE file from the GUI's app folder. So now the service fires up and starts looking for stuff in the MyService.config file, and can't find it, because it's living in someone else's app folder, with only the GUI's MyGUI.config file present. So, how do I get MyService.config to be available to the service?

    Read the article

  • How to do Linq aggregates when there might be an empty set?

    - by Shaul
    I have a Linq collection of Things, where Thing has an Amount (decimal) property. I'm trying to do an aggregate on this for a certain subset of Things: var total = myThings.Sum(t => t.Amount); and that works nicely. But then I added a condition that left me with no Things in the result: var total = myThings.Where(t => t.OtherProperty == 123).Sum(t => t.Amount); And instead of getting total = 0 or null, I get an error: System.InvalidOperationException: The null value cannot be assigned to a member with type System.Decimal which is a non-nullable value type. That is really nasty, because I didn't expect that behavior. I would have expected total to be zero, maybe null - but certainly not to throw an exception! What am I doing wrong? What's the workaround/fix?

    Read the article

  • How to avoid geometric slowdown with large Linq transactions?

    - by Shaul
    I've written some really nice, funky libraries for use in LinqToSql. (Some day when I have time to think about it I might make it open source... :) ) Anyway, I'm not sure if this is related to my libraries or not, but I've discovered that when I have a large number of changed objects in one transaction, and then call DataContext.GetChangeSet(), things start getting reaalllly slooowwwww. When I break into the code, I find that my program is spinning its wheels doing an awful lot of Equals() comparisons between the objects in the change set. I can't guarantee this is true, but I suspect that if there are n objects in the change set, then the call to GetChangeSet() is causing every object to be compared to every other object for equivalence, i.e. at best (n^2-n)/2 calls to Equals()... Yes, of course I could commit each object separately, but that kinda defeats the purpose of transactions. And in the program I'm writing, I could have a batch job containing 100,000 separate items, that all need to be committed together. Around 5 billion comparisons there. So the question is: (1) is my assessment of the situation correct? Do you get this behavior in pure, textbook LinqToSql, or is this something my libraries are doing? And (2) is there a standard/reasonable workaround so that I can create my batch without making the program geometrically slower with every extra object in the change set?

    Read the article

  • WCF newbie - how to install and use a SSL certificate?

    - by Shaul
    This should be a snap for anyone who's done it before... I'm trying to set up a self-hosted WCF service using NetTcpBinding. I got a trial SSL certificate from Thawte and successfully installed that in my IIS store, and I think I've got it correctly set up in the service - at least it doesn't exception out on me! Now, I'm trying to connect the client (this is still all on my dev machine), and it's giving me an error, "Message = "The X.509 certificate CN=ssl.mydomain.com, OU=For Test Purposes Only. No assurances., OU=IT, O=My Company, L=My Town, S=None, C=IL chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider." Ooookeeeey... now what? Client code (I want to do this in code, not app.config): var baseAddress = "localhost"; var factory = new DuplexChannelFactory<IMyWCFService>(new InstanceContext(SiteServer.Instance)); factory.Endpoint.Address = new EndpointAddress("net.tcp://{0}:8000/".Fmt(baseAddress)); var binding = new NetTcpBinding(SecurityMode.Message); binding.Security.Message.ClientCredentialType = MessageCredentialType.UserName; factory.Endpoint.Binding = binding; var u = factory.Credentials.UserName; u.UserName = userName; u.Password = password; return factory.CreateChannel()

    Read the article

  • Subsonic foreign key returning collection?

    - by Shaul
    I'm just writing my first "Hello World" program using Subsonic, for which I've thrown together a simple little Customer/Invoice/InvoiceItem/Product database. The connection was successfully made to the DB, and it generated all the right ActiveRecord classes. But for some reason, the Invoice class has a property called Customers, which returns a collection of Customer objects, even though the Invoice table has a CustomerID field which has a foreign key to the Customer table. I would have expected a Customer property returning a single Customer object. I must be doing something wrong - but what?

    Read the article

  • How to do bulk update of views?

    - by Shaul
    My database has about 30 views, most of which have a reference to another database on this server (call it DB1). Now, without going into the reasons why, I need to update all those views to DB2, also on the local server. I would hate to have to do this manually on each view. Is there some SQL query I can run that will replace all occurrences of the string 'DB1' with 'DB2' in all my views?

    Read the article

1