Search Results

Search found 24 results on 1 pages for 'sigchld'.

Page 1/1 | 1 

• what is the relation between SIGTSTP and SIGCHLD

  - by Rawhi

  I have tow handlers for each one of them (SIGTSTP, SIGCHLD), the thing is that when I pause a process using SIGTSTP the handler function of SIGCHLD run too. what should I do to prevent this . void ExeExternal(char *args[MAX_ARG], char* cmdString, LIST_ELEMENT** pList, int *Susp_Bg_Pid, int *susp) { int pID, status, w; switch (pID = fork()) { case -1: perror("smash error: >"); break; case 0: // Child Process setpgrp(); execv(args[0], args); execvp(args[0], args); perror("error"); exit(EXIT_FAILURE); break; default: if (cmdString[strlen(cmdString) - 1] != '&') { *Susp_Bg_Pid = pID; *susp = 1; while(*susp); } else { InsertElem(pList, args[0], getpid(), pID, 0); } break; } } signal handlers : void signalHandler(int signal) { int pid, cstatus; if (signal == SIGCHLD) { susp = 0; pid = waitpid(-1, &cstatus, WNOHANG); printf("[[child %d terminated]]\n", pid); DelPID(&JobsList, pid); } } void ctrlZsignal(int signal){ kill(Susp_Bg_Pid, SIGTSTP); susp = 0; printf("\nchild %d suspended\n", Susp_Bg_Pid); } Susp_Bg_Pid used to save the paused process id. susp indicates the state of the "smash" the parent process if it is suspended or not .

  Read the article

• Avoiding a fork()/SIGCHLD race condition

  - by larry

  Please consider the following fork()/SIGCHLD pseudo-code. // main program excerpt for (;;) { if ( is_time_to_make_babies ) { pid = fork(); if (pid == -1) { /* fail */ } else if (pid == 0) { /* child stuff */ print "child started" exit } else { /* parent stuff */ print "parent forked new child ", pid children.add(pid); } } } // SIGCHLD handler sigchld_handler(signo) { while ( (pid = wait(status, WNOHANG)) > 0 ) { print "parent caught SIGCHLD from ", pid children.remove(pid); } } In the above example there's a race-condition. It's possible for "/* child stuff */" to finish before "/* parent stuff */" starts which can result in a child's pid being added to the list of children after it's exited, and never being removed. When the time comes for the app to close down, the parent will wait endlessly for the already-finished child to finish. One solution I can think of to counter this is to have two lists: started_children and finished_children. I'd add to started_children in the same place I'm adding to children now. But in the signal handler, instead of removing from children I'd add to finished_children. When the app closes down, the parent can simply wait until the difference between started_children and finished_children is zero. Another possible solution I can think of is using shared-memory, e.g. share the parent's list of children and let the children .add and .remove themselves? But I don't know too much about this. EDIT: Another possible solution, which was the first thing that came to mind, is to simply add a sleep(1) at the start of /* child stuff */ but that smells funny to me, which is why I left it out. I'm also not even sure it's a 100% fix. So, how would you correct this race-condition? And if there's a well-established recommended pattern for this, please let me know! Thanks.

  Read the article

• Stunnel delaying boot

  - by Onitlikesonic

  My stunnel implementation works fine when the network is plugged in but it takes an awful amount of time, which delays the whole boot process, when there is no network connected to the machine. As extra information: I'm using "delay=yes" I'm using an fqdn (e.g: stunnel.mydomain.com) for the connections Using ubuntu but this also happened with centos5 previously How can this be avoided or a timeout specified? edit: doing an strace as suggested by symcbean shows the following (including the last part where it hangs): [...] --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 0 close(3) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6039 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7ff9ce0c79d0) = 6046 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046 --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 6046 write(1, "[Started: /etc/stunnel/stunnel.c"..., 37) = 37 write(1, "stunnel.\n", 9) = 9 exit_group(0) = ? [...] stunnel hangs in this line: wait4(-1, and when i plug in the network cable it continues to show [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046

  Read the article

• How to remove the hint in the terminal?

  - by jiangchengwu

  As a normal user , when I run some command like ps\netstat, the terminal hint me: (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) I know could redirect STDERR to /dev/null can remove this hint. But I want to know is there any way to remove it , such as edit some configuration files ? [deploy@storage2 ~]$ ps -V (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) procps version 3.2.7 [deploy@storage2 ~]$ ps -V 2>/dev/null procps version 3.2.7 My OS info: [deploy@storage2 ~]$ uname -a Linux storage2 2.6.18-243.el5 #1 SMP Mon Feb 7 18:47:27 EST 2011 x86_64 x86_64 x86_64 GNU/Linux [deploy@storage2 ~]$ lsb_release LSB Version: :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch [deploy@storage2 ~]$ netstat -V (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) net-tools 1.60 netstat 1.42 (2001-04-15) Fred Baumgarten, Alan Cox, Bernd Eckenfels, Phil Blundell, Tuan Hoang and others +NEW_ADDRT +RTF_IRTT +RTF_REJECT +FW_MASQUERADE +I18N AF: (inet) +UNIX +INET +INET6 +IPX +AX25 +NETROM +X25 +ATALK +ECONET +ROSE HW: +ETHER +ARC +SLIP +PPP +TUNNEL +TR +AX25 +NETROM +X25 +FR +ROSE +ASH +SIT +FDDI +HIPPI +HDLC/LAPB There are more info from strace: [deploy@storage2 ~]$ strace ps -V execve("/bin/ps", ["ps", "-V"], [/* 27 vars */]) = 0 brk(0) = 0x929a000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=99752, ...}) = 0 mmap2(NULL, 99752, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7fde000 close(3) = 0 open("/lib/libnsl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \241\210\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=101404, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fdd000 mmap2(0x887000, 92104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x887000 mmap2(0x89a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12) = 0x89a000 mmap2(0x89c000, 6088, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x89c000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0Pzt\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=16428, ...}) = 0 mmap2(0x747000, 12408, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x747000 mmap2(0x749000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x749000 close(3) = 0 open("/lib/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\204p\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=208352, ...}) = 0 mmap2(0x705000, 155760, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x705000 mmap2(0x72a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24) = 0x72a000 close(3) = 0 open("/lib/libcrypt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\246q\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=45288, ...}) = 0 mmap2(0x71a000, 201020, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fab000 mmap2(0xf7fb4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xfffffffff7fb4000 mmap2(0xf7fb6000, 155964, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fb6000 close(3) = 0 open("/lib/libutil.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \n\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=13420, ...}) = 0 mmap2(NULL, 12428, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fa7000 mmap2(0xf7fa9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xfffffffff7fa9000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@(s\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=129716, ...}) = 0 mmap2(0x72e000, 90596, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x72e000 mmap2(0x741000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x741000 mmap2(0x743000, 4580, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x743000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340?]\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1611564, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fa6000 mmap2(0x5be000, 1328580, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x5be000 mmap2(0x6fd000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13f) = 0x6fd000 mmap2(0x700000, 9668, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x700000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fa5000 set_thread_area(0xffd61bb4) = 0 mprotect(0x6fd000, 8192, PROT_READ) = 0 mprotect(0x741000, 4096, PROT_READ) = 0 mprotect(0xf7fa9000, 4096, PROT_READ) = 0 mprotect(0xf7fb4000, 4096, PROT_READ) = 0 mprotect(0x72a000, 4096, PROT_READ) = 0 mprotect(0x749000, 4096, PROT_READ) = 0 mprotect(0x89a000, 4096, PROT_READ) = 0 mprotect(0x5ba000, 4096, PROT_READ) = 0 munmap(0xf7fde000, 99752) = 0 set_tid_address(0xf7fa5708) = 20214 set_robust_list(0xf7fa5710, 0xc) = 0 futex(0xffd61f74, FUTEX_WAKE_PRIVATE, 1) = 0 rt_sigaction(SIGRTMIN, {0x4007323d0, [], 0}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x10000004007322e0, [], 0}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=-4284481536, rlim_max=67108864*1024}) = 0 uname({sys="Linux", node="storage2", ...}) = 0 readlink("/proc/self/exe", "/bin/ps"..., 260) = 7 brk(0) = 0x929a000 brk(0x92bb000) = 0x92bb000 open("/bin/ps", O_RDONLY|O_LARGEFILE) = 3 _llseek(3, -12, [711660], SEEK_END) = 0 read(3, "\274U!\253\2\0\0\0\224\237\t\0", 12) = 12 mmap2(NULL, 634880, PROT_READ, MAP_SHARED, 3, 0x13) = 0xfffffffff7f0a000 mmap2(NULL, 630784, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7e70000 close(3) = 0 futex(0x74a06c, FUTEX_WAKE_PRIVATE, 2147483647) = 0 geteuid32() = 501 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7ff6000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0xf7ff6000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=99752, ...}) = 0 mmap2(NULL, 99752, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7fde000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\30\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=46680, ...}) = 0 mmap2(NULL, 41616, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7e65000 mmap2(0xf7e6e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xfffffffff7e6e000 close(3) = 0 mprotect(0xf7e6e000, 4096, PROT_READ) = 0 munmap(0xf7fde000, 99752) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=2166, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7ff6000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2166 close(3) = 0 munmap(0xf7ff6000, 4096) = 0 mkdir("/tmp/pdk-deploy/", 0755) = -1 EEXIST (File exists) mkdir("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a", 0755) = -1 EEXIST (File exists) open("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a/libperl.so", O_RDONLY|O_LARGEFILE) = 3 close(3) = 0 open("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a/libperl.so", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300!\2\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0664, st_size=1264090, ...}) = 0 mmap2(NULL, 1140104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7d4e000 mmap2(0xf7e5a000, 45056, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10b) = 0xfffffffff7e5a000 close(3) = 0 rt_sigaction(SIGFPE, {0x1000000000000001, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|SA_SIGINFO|0x3d61cb8, (nil)}, {SIG_DFL, ~[HUP INT ILL ABRT BUS SEGV USR2 PIPE ALRM TERM STOP TSTP TTIN TTOU XCPU WINCH IO PWR SYS RTMIN RT_1 RT_2 RT_4 RT_5 RT_8 RT_9 RT_11 RT_12 RT_13 RT_16 RT_17 RT_18 RT_22 RT_24 RT_25 RT_26 RT_27 RT_28 RT_29 RT_30 RT_31], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 getuid32() = 501 geteuid32() = 501 getgid32() = 502 getegid32() = 502 open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=56454896, ...}) = 0 mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7b4e000 mmap2(NULL, 241664, PROT_READ, MAP_PRIVATE, 3, 0x13ec) = 0xfffffffff7b13000 mmap2(NULL, 4096, PROT_READ, MAP_PRIVATE, 3, 0x1466) = 0xfffffffff7b12000 close(3) = 0 mmap2(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7af1000 time(NULL) = 1348210009 readlink("/proc/self/exe", "/bin/ps"..., 4095) = 7 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 _llseek(0, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd618a8) = -1 EINVAL (Invalid argument) _llseek(1, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) ioctl(2, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd618a8) = -1 EINVAL (Invalid argument) _llseek(2, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) open("/dev/null", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61978) = -1 ENOTTY (Inappropriate ioctl for device) _llseek(3, 0, [0], SEEK_CUR) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 rt_sigaction(SIGCHLD, NULL, {SIG_DFL, [], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 brk(0x92dc000) = 0x92dc000 getppid() = 20212 stat64("/opt/ActivePerl-5.8/site/lib/sitecustomize.pl", 0xffd61560) = -1 ENOENT (No such file or directory) close(3) = 0 open("/usr/lib/.khostd/.hostconf", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61828) = -1 ENOTTY (Inappropriate ioctl for device) _llseek(3, 0, [0], SEEK_CUR) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=334, ...}) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 read(3, "bindport=9001\ntrustip=221.122.57"..., 4096) = 334 read(3, "", 4096) = 0 close(3) = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20215 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) fstat64(3, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 read(3, (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) "tcp 0 0 0.0.0.0:9001"..., 4096) = 109 read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- fstat64(3, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [TRAP BUS FPE USR1 CHLD CONT TTOU VTALRM IO RTMIN], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 waitpid(20215, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20215 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [TRAP BUS FPE USR1 CHLD CONT TTOU VTALRM IO RTMIN], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 chdir("/usr/lib/.khostd") = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20218 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|0x3d61850, (nil)}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 waitpid(20218, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20218 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 chdir("/home/deploy") = 0 stat64("/etc/cron.hourly/hichina", {st_mode=S_IFREG|0755, st_size=711660, ...}) = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20230 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) read(3, "procps version 3.2.7\n", 4096) = 21 read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|0x3d61850, (nil)}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 waitpid(20230, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20230 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 write(1, "procps version 3.2.7\n", 21procps version 3.2.7 ) = 21 munmap(0xf7af1000, 135168) = 0 munmap(0xf7e70000, 630784) = 0 munmap(0xf7f0a000, 634880) = 0 munmap(0xf7d4e000, 1140104) = 0 exit_group(0) = ? [ Process PID=20214 runs in 32 bit mode. ] Thank you very much.

  Read the article

• Linux servers going into Halt when pressing Control-D in putty or exit in the shell

  - by Itai Ganot

  Since today at noon, there's a number of Linux CentOS servers which are going to Halt whenever i type exit or use Control-D to close the putty window. Did anyone encounter this weird behavior before? I've checked the aliases list on the servers and there is no alias regarding halt command. After the server came online i've checked the history and saw a "logout" command there but nothing which is related to Halt. At first, i thought it happens only from my computer but later i realized that it happens to everyone which types exit, logout or control+d. 2 of these server are our main iptables firewalls and so it's super critical, your assistance is much appreciated. It looks like that, and it only happens on servers with active IPTables: [root@srv1 bin]# ssh srv2 root@srv2's password: Last login: Sun Nov 11 17:19:41 2012 from 192.168.12.98 [root@srv2 ~]# vim /etc/crontab [root@srv2 ~]# exit logout Broadcast message from root (pts/1) (Tue Nov 13 10:44:04 2012): The system is going down for system halt NOW! Connection to srv2 closed. [root@srv1 bin]# In my troubleshooting steps i came across the command strace, and so i've opened two bash windows to one of the problematic server and i used strace -p PID_of_bash. When i typed in exit in the first shell it did go to halt, attached is the strace output, if you can check it out and tell me if you see anything suspicious i'd be more than thankful. RER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGWINCH, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, 8) = 0 socket(PF_NETLINK, SOCK_RAW, 9) = 3 sendmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(2)=[{"\25\0\0\0d\4\1\0\0\0\0\0\0\0\0\0", 16}, {"exit\0", 5}], msg_controllen=0, msg_flags=0}, 0) = 21 close(3) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "logout\n", 7) = 7 write(2, "There are stopped jobs.\n", 24) = 24 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 pipe([3, 4]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2b0e45db6fe0) = 23717 setpgid(23717, 23717) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 close(3) = 0 close(4) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [23717]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WSTOPPED|WCONTINUED, NULL) = 23717 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 ioctl(255, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(255, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395da984, WNOHANG|WSTOPPED|WCONTINUED, NULL) = 0 rt_sigreturn(0x11) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 ioctl(0, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 ioctl(0, TIOCSWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig -icanon -echo ...}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT QUIT ALRM TSTP TTIN TTOU], [], 8) = 0 rt_sigaction(SIGINT, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGWINCH, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "[root@g2-lga ~]# ", 17) = 17 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "e", 1) = 1 write(2, "e", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "x", 1) = 1 write(2, "x", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "i", 1) = 1 write(2, "i", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "t", 1) = 1 write(2, "t", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "\r", 1) = 1 write(2, "\n", 1) = 1 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig icanon echo ...}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGWINCH, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, 8) = 0 socket(PF_NETLINK, SOCK_RAW, 9) = 3 sendmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(2)=[{"\25\0\0\0d\4\1\0\0\0\0\0\0\0\0\0", 16}, {"exit\0", 5}], msg_controllen=0, msg_flags=0}, 0) = 21 close(3) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "logout\n", 7) = 7 open("/root/.bash_logout", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=24, ...}) = 0 read(3, "# ~/.bash_logout\n\nclear\n", 24) = 24 close(3) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 stat(".", {st_mode=S_IFDIR|0750, st_size=12288, ...}) = 0 stat("/usr/kerberos/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/kerberos/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/local/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/local/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/bin/clear", {st_mode=S_IFREG|0755, st_size=12712, ...}) = 0 access("/usr/bin/clear", X_OK) = 0 access("/usr/bin/clear", R_OK) = 0 stat("/usr/bin/clear", {st_mode=S_IFREG|0755, st_size=12712, ...}) = 0 access("/usr/bin/clear", X_OK) = 0 access("/usr/bin/clear", R_OK) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 pipe([3, 4]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2b0e45db6fe0) = 23726 setpgid(23726, 23726) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 close(3) = 0 close(4) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [23726]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 wait4(-1, Broadcast message from root (pts/0) (Wed Nov 14 12:41:44 2012): The system is going down for system halt NOW! [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WSTOPPED|WCONTINUED, NULL) = 23726 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 ioctl(255, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(255, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395da634, WNOHANG|WSTOPPED|WCONTINUED, NULL) = 0 rt_sigreturn(0x11) = 0 open("/etc/bash.bash_logout", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 stat("/root/.bash_history", {st_mode=S_IFREG|0600, st_size=28900, ...}) = 0 open("/root/.bash_history", O_WRONLY|O_APPEND) = 3 write(3, "cd /etc/profile.d/\nls\nls -alrt\ng"..., 1120) = 1120 close(3) = 0 open("/root/.bash_history", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0600, st_size=30020, ...}) = 0 read(3, "history \nping g1-lga\nping g1-lga"..., 30020) = 30020 close(3) = 0 open("/root/.bash_history", O_WRONLY|O_TRUNC) = 3 write(3, "grep \"216.18\" *\nhistory \nexit\nvi"..., 27609) = 27609 close(3) = 0 kill(4294965658, SIGTERM) = 0 kill(4294965658, SIGCONT) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, [{WIFSIGNALED(s) && WTERMSIG(s) == SIGTERM}], WNOHANG|WSTOPPED|WCONTINUED, NULL) = 1638 wait4(-1, 0x7fff395dac34, WNOHANG|WSTOPPED|WCONTINUED, NULL) = -1 ECHILD (No child processes) rt_sigreturn(0x11) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395dac34, WNOHANG|WSTOPPED|WCONTINUED, NULL) = -1 ECHILD (No child processes) rt_sigreturn(0xffffffffffffffff) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 setpgid(0, 20458) = -1 EPERM (Operation not permitted) exit_group(1) = ? Process 20458 detached [root@g2-lga ~]#

  Read the article

• Problem with signal handlers being called too many times [closed]

  - by Hristo

  how can something print 3 times when it only goes the printing code twice? I'm coding in C and the code is in a SIGCHLD signal handler I created. void chld_signalHandler() { int pidadf = (int) getpid(); printf("pidafdfaddf: %d\n", pidadf); while (1) { int termChildPID = waitpid(-1, NULL, WNOHANG); if (termChildPID == 0 || termChildPID == -1) { break; } dll_node_t *temp = head; while (temp != NULL) { printf("stuff\n"); if (temp->pid == termChildPID && temp->type == WORK) { printf("inside if\n"); // read memory mapped file b/w WORKER and MAIN // get statistics and write results to pipe char resultString[256]; // printing TIME int i; for (i = 0; i < 24; i++) { sprintf(resultString, "TIME; %d ; %d ; %d ; %s\n",i,1,2,temp->stats->mboxFileName); fwrite(resultString, strlen(resultString), 1, pipeFD); } remove_node(temp); break; } temp = temp->next; } printf("done printing from sigchld \n"); } return; } the output for my MAIN process is this: MAIN PROCESS 16214 created WORKER PROCESS 16220 for file class.sp10.cs241.mbox pidafdfaddf: 16214 stuff stuff inside if done printing from sigchld MAIN PROCESS 16214 created WORKER PROCESS 16221 for file class.sp10.cs225.mbox pidafdfaddf: 16214 stuff stuff inside if done printing from sigchld and the output for the MONITOR process is this: MONITOR: pipe is open for reading MONITOR PIPE: TIME; 0 ; 1 ; 2 ; class.sp10.cs225.mbox MONITOR PIPE: TIME; 0 ; 1 ; 2 ; class.sp10.cs225.mbox MONITOR PIPE: TIME; 0 ; 1 ; 2 ; class.sp10.cs241.mbox MONITOR: end of readpipe ( I've taken out repeating lines so I don't take up so much space ) Thanks, Hristo

  Read the article

• Problem with signal handlers

  - by Hristo

  how can something print 3 times when it only goes the printing code twice? I'm coding in C and the code is in a SIGCHLD signal handler I created. void chld_signalHandler() { int pidadf = (int) getpid(); printf("pidafdfaddf: %d\n", pidadf); while (1) { int termChildPID = waitpid(-1, NULL, WNOHANG); if (termChildPID == 0 || termChildPID == -1) { break; } dll_node_t *temp = head; while (temp != NULL) { printf("stuff\n"); if (temp->pid == termChildPID && temp->type == WORK) { printf("inside if\n"); // read memory mapped file b/w WORKER and MAIN // get statistics and write results to pipe char resultString[256]; // printing TIME int i; for (i = 0; i < 24; i++) { sprintf(resultString, "TIME; %d ; %d ; %d ; %s\n",i,1,2,temp->stats->mboxFileName); fwrite(resultString, strlen(resultString), 1, pipeFD); } remove_node(temp); break; } temp = temp->next; } printf("done printing from sigchld \n"); } return; } the output for my MAIN process is this: MAIN PROCESS 16214 created WORKER PROCESS 16220 for file class.sp10.cs241.mbox pidafdfaddf: 16214 stuff stuff inside if done printing from sigchld MAIN PROCESS 16214 created WORKER PROCESS 16221 for file class.sp10.cs225.mbox pidafdfaddf: 16214 stuff stuff inside if done printing from sigchld and the output for the MONITOR process is this: MONITOR: pipe is open for reading MONITOR PIPE: TIME; 0 ; 1 ; 2 ; class.sp10.cs225.mbox MONITOR PIPE: TIME; 0 ; 1 ; 2 ; class.sp10.cs225.mbox MONITOR PIPE: TIME; 0 ; 1 ; 2 ; class.sp10.cs241.mbox MONITOR: end of readpipe ( I've taken out repeating lines so I don't take up so much space ) Thanks, Hristo

  Read the article

• i don't understand how...

  - by Hristo

  how can something print 3 times when it only goes the printing code twice? I'm coding in C and the code is in a SIGCHLD signal handler I created. void chld_signalHandler() { int pidadf = (int) getpid(); printf("pidafdfaddf: %d\n", pidadf); while (1) { int termChildPID = waitpid(-1, NULL, WNOHANG); if (termChildPID == 0 || termChildPID == -1) { break; } dll_node_t *temp = head; while (temp != NULL) { printf("stuff\n"); if (temp-pid == termChildPID && temp-type == WORK) { printf("inside if\n"); // read memory mapped file b/w WORKER and MAIN // get statistics and write results to pipe char resultString[256]; // printing TIME int i; for (i = 0; i < 24; i++) { sprintf(resultString, "TIME; %d ; %d ; %d ; %s\n",i,1,2,temp->stats->mboxFileName); fwrite(resultString, strlen(resultString), 1, pipeFD); } remove_node(temp); break; } temp = temp-next; } printf("done printing from sigchld \n"); } return; } the output for my MAIN process is this: MAIN PROCESS 16214 created WORKER PROCESS 16220 for file class.sp10.cs241.mbox pidafdfaddf: 16214 stuff stuff inside if done printing from sigchld MAIN PROCESS 16214 created WORKER PROCESS 16221 for file class.sp10.cs225.mbox pidafdfaddf: 16214 stuff stuff inside if done printing from sigchld and the output for the MONITOR process is this: MONITOR: pipe is open for reading MONITOR PIPE: TIME; 0 ; 1 ; 2 ; class.sp10.cs225.mbox MONITOR PIPE: TIME; 0 ; 1 ; 2 ; class.sp10.cs225.mbox MONITOR PIPE: TIME; 0 ; 1 ; 2 ; class.sp10.cs241.mbox MONITOR: end of readpipe ( I've taken out repeating lines so I don't take up so much space ) Thanks, Hristo

  Read the article

• determine pid of terminated process

  - by Hristo

  I'm trying to figure out what the pid is of a process that sent the SIGCHLD signal, and I want to do this in a signal handler I created for SIGCHLD. How would I do this? I'm trying: int pid = waitpid(-1, NULL, WNOHANG); .. because I want to wait for any child process that is spawned. Thanks, Hristo

  Read the article

• Mounting NAS drive with cifs using credentials file through fstab does not work

  - by mahatmanich

  I can mount the drive in the following way, no problem there: mount -t cifs //nas/home /mnt/nas -o username=username,password=pass\!word,uid=1000,gid=100,rw,suid However if I try to mount it via fstab I get the following error: //nas/home /mnt/nas cifs iocharset=utf8,credentials=/home/username/.smbcredentials,uid=1000,gid=100 0 0 auto .smbcredentials file looks like this: username=username password=pass\!word Note the ! in my password ... which I am escaping in both instances I also made sure there are no eol in the file using :set noeol binary from Mount CIFS Credentials File has Special Character chmod on .credentials file is 0600 and chown is root:root file is under ~/ Why am I getting in on the one side and not with fstab?? I am running on ubuntu 12 LTE and mount.cifs -V gives me mount.cifs version: 5.1 Any help and suggestions would be appreciated ... UPDATE: /var/log/syslog shows following [26630.509396] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [26630.509407] CIFS VFS: Send error in SessSetup = -13 [26630.509528] CIFS VFS: cifs_mount failed w/return code = -13 UPDATE no 2 Debugging with strace mount through fstab: strace -f -e trace=mount mount -a Process 4984 attached Process 4983 suspended Process 4985 attached Process 4984 suspended Process 4984 resumed Process 4985 detached [pid 4984] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4984] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = -1 EACCES (Permission denied) mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Process 4983 resumed Process 4984 detached Mount through terminal strace -f -e trace=mount mount -t cifs //nas/home /mnt/nas -o username=user,password=pass\!wd,uid=1000,gid=100,rw,suid Process 4990 attached Process 4989 suspended Process 4991 attached Process 4990 suspended Process 4990 resumed Process 4991 detached [pid 4990] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4990] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = 0 Process 4989 resumed Process 4990 detached

  Read the article

• fork() within a fork()

  - by codingfreak

  Hi Is there any way to differentiate the child processes created by different fork() functions within a program. global variable i; SIGCHLD handler function() { i--; } handle() { fork() --> FORK2 } main() { while(1) { if(i<5) { i++; if( (fpid=fork())==0) --> FORK1 handle() else (fpid>0) ..... } } } Is there any way I can differentiate between child processes created by FORK1 and FORK2 ?? because I am trying to decrement the value of global variable 'i' in SIGCHLD handler function and it should be decremented only for the processes created by FORK1 .. I tried to use an array and save the process id [this code is placed in fpid0 part] of the child processes created by FORK1 and then decrement the value of 'i' only if the process id of dead child is within the array ... But this didn't work out as sometimes child processes dead so fastly that updating the array is not done perfectly and everything messed up. So is there any better solution for this problem ??

  Read the article

• First could access the repository next cannot

  - by Banani

  Hi! I have configured svnserve (1.6.5,plain, without apache) on Fedora 12. I could ran the following svn subcommands which access the repository after configuration. Such as, commit, update,checkout, list. But, when next time ( after stopping,ctrl-c and then starting svnserve)I tried above commands, could not access the repository. This is happening both from local and remote machine. I ran svn and svnserve as below. 'svn commit svn://127.0.0.1/myrepository/' from local client. 'svnserve -d --foregorund --listen-port=3690 -r /path-to-repository/mypository/' To understand the problem better, I created another repository and found similar behavior . Frist I could access the repository and next I could not. I tried doing strace on svnserve, but don't uderstand much of it. Below is the partial output. accept(3, {sa_family=AF_INET, sin_port=htons(54425), sin_addr=inet_addr("127.0.0 .1")}, [16]) = 4 fcntl64(4, F_GETFD) = 0 fcntl64(4, F_SETFD, FD_CLOEXEC) = 0 waitpid(-1, 0xbfcdf31c, WNOHANG|WSTOPPED) = -1 ECHILD (No child processes) clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, chil d_tidptr=0xb7743758) = 9737 close(4) = 0 accept(3, 0xbfcdf2bc, [128]) = ? ERESTARTSYS (To be restarted) --- SIGCHLD (Child exited) @ 0 (0) --- sigreturn() = ? (mask now []) waitpid(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG|WSTOPPED) = 9737 waitpid(-1, 0xbfcdf31c, WNOHANG|WSTOPPED) = -1 ECHILD (No child processes) My question: Why user are not able to access the repository anymore? What information the strace output gives about this problem? Any help is much appreciated. Thanks. Banani

  Read the article

• linked list elements gone?

  - by Hristo

  I create a linked list dynamically and initialize the first node in main(), and I add to the list every time I spawn a worker process. Before the worker process exits, I print the list. Also, I print the list inside my sigchld signal handler. in main(): head = NULL; tail = NULL; // linked list to keep track of worker process dll_node_t *node; node = (dll_node_t *) malloc(sizeof(dll_node_t)); // initialize list, allocate memory append_node(node); node->pid = mainPID; // the first node is the MAIN process node->type = MAIN; in a fork()'d process: // add to list dll_node_t *node; node = (dll_node_t *) malloc(sizeof(dll_node_t)); append_node(node); node->pid = mmapFileWorkerStats->childPID; node->workerFileName = mmapFileWorkerStats->workerFileName; node->type = WORK; functions: void append_node(dll_node_t *nodeToAppend) { /* * append param node to end of list */ // if the list is empty if (head == NULL) { // create the first/head node head = nodeToAppend; nodeToAppend->prev = NULL; } else { tail->next = nodeToAppend; nodeToAppend->prev = tail; } // fix the tail to point to the new node tail = nodeToAppend; nodeToAppend->next = NULL; } finally... the signal handler: void chld_signalHandler() { dll_node_t *temp1 = head; while (temp1 != NULL) { printf("2. node's pid: %d\n", temp1->pid); temp1 = temp1->next; } int termChildPID = waitpid(-1, NULL, WNOHANG); dll_node_t *temp = head; while (temp != NULL) { if (temp->pid == termChildPID) { printf("found process: %d\n", temp->pid); } temp = temp->next; } return; } Is it true that upon the worker process exiting, the SIGCHLD signal handler is triggered? If so, that would mean that after I print the tree before exiting, the next thing I do is in the signal handler which is print the tree... which would mean i would print the tree twice? But the tree isn't the same. The node I add in the worker process doesn't exist when I print in the signal handler or at the very end of main(). Any idea why? Thanks, Hristo

  Read the article

• Can't log in via SSH to any accounts set to use /bin/bash as a default shell

  - by Gui Ambros

  I'm trying to install bash as the default shell on a ARM Linux running on an embedded device (Synology DS212+ NAS). But there's something really wrong, and I can't figure out what it is. Symptoms: 1) Root has /bin/bash as default shell, and can log in normally via SSH: $ grep root /etc/passwd root:x:0:0:root:/root:/bin/bash $ ssh root@NAS root@NAS's password: Last login: Sun Dec 16 14:06:56 2012 from desktop # 2) joeuser has /bin/bash as default shell, and receives "Permission denied" when trying to log in via SSH: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/bash $ ssh joeuser@localhost joeuser@NAS's password: Last login: Sun Dec 16 14:07:22 2012 from desktop Permission denied, please try again. Connection to localhost closed. 3) changing joeuser's shell back to /bin/sh: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/sh $ ssh joeuser@localhost Last login: Sun Dec 16 15:50:52 2012 from localhost $ To make things even more strange, I can log in as joeuser using /bin/bash using the serial console (!). Also a su - joeuser as root works fine, so the bash binary itself is working fine. In an act of despair, I changed joeuser's uid to 0 on /etc/passwd, but also didn't work, so it doesn't seem to be anything permission related. Seems that bash is doing some extra checking that sshd didn't like, and blocking the connections for non-root users. Maybe some sort of sanity checking - or terminal emulation - that is triggering the SIGCHLD, but only when called via ssh. I already went through every single item on sshd_config, and also put SSHD in debug mode, but didn't find anything strange. Here's my /etc/ssh/sshd_config: LogLevel DEBUG LoginGraceTime 2m PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile %h/.ssh/authorized_keys ChallengeResponseAuthentication no UsePAM yes AllowTcpForwarding no ChrootDirectory none Subsystem sftp internal-sftp -f DAEMON -u 000 And here's the output from /usr/syno/sbin/sshd -d, showing the failed attempt of joeuser trying to log in, with /bin/bash as the shell: debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: HPN Buffer Size: 87380 debug1: sshd version OpenSSH_5.8p1-hpn13v11 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: read PEM private key done: type ECDSA debug1: private host key: #2 type 3 ECDSA debug1: rexec_argv[0]='/usr/syno/sbin/sshd' debug1: rexec_argv[1]='-d' Set /proc/self/oom_adj from 0 to -17 debug1: Bind to port 22 on ::. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on :: port 22. debug1: Bind to port 22 on 0.0.0.0. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on 0.0.0.0 port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 6 out 6 newsock 6 pipe -1 sock 9 debug1: inetd sockets after dupping: 4, 4 Connection from 127.0.0.1 port 52212 debug1: HPN Disabled: 0, HPN Buffer Size: 87380 debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1-hpn13v11 SSH: Server;Ltype: Version;Remote: 127.0.0.1-52212;Protocol: 2.0;Client: OpenSSH_5.8p1-hpn13v11 debug1: match: OpenSSH_5.8p1-hpn13v11 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1-hpn13v11 debug1: permanently_set_uid: 1024/100 debug1: MYFLAG IS 1 debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: AUTH STATE IS 0 debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: client->server aes128-ctr hmac-md5 none SSH: Server;Ltype: Kex;Remote: 127.0.0.1-52212;Enc: aes128-ctr;MAC: hmac-md5;Comp: none debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: server->client aes128-ctr hmac-md5 none debug1: expecting SSH2_MSG_KEX_ECDH_INIT debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user joeuser service ssh-connection method none SSH: Server;Ltype: Authname;Remote: 127.0.0.1-52212;Name: joeuser debug1: attempt 0 failures 0 debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: PAM: initializing for "joeuser" debug1: PAM: setting PAM_RHOST to "localhost" debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user joeuser service ssh-connection method password debug1: attempt 1 failures 0 debug1: do_pam_account: called Accepted password for joeuser from 127.0.0.1 port 52212 ssh2 debug1: monitor_child_preauth: joeuser has been authenticated by privileged process debug1: PAM: establishing credentials User child is on pid 9129 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_new: session 0 debug1: session_pty_req: session 0 alloc /dev/pts/1 debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 9130 debug1: session_exit_message: session 0 channel 0 pid 9130 debug1: session_exit_message: release channel 0 debug1: session_by_tty: session 0 tty /dev/pts/1 debug1: session_pty_cleanup: session 0 release /dev/pts/1 Received disconnect from 127.0.0.1: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials Here you have the full output of sshd -dd, together with ssh -vv. Bash: # bash --version GNU bash, version 3.2.49(1)-release (arm-none-linux-gnueabi) Copyright (C) 2007 Free Software Foundation, Inc. The bash binary was cross compiled from source. I also tried using a pre-compiled binary from the Optware distribution, but had the exact same problem. I checked for missing shared libraries using objdump -x, but they're all there. Any ideas what could be causing this "Permission denied, please try again."? I'm almost diving in the bash source code to investigate, but trying to avoid hours chasing something that may be silly.

  Read the article

• MySQL hangs if connection comes from outside the LAN

  - by Subito

  I have a MySQL Server operating just fine if I access him from his local LAN (192.168.100.0/24). If I try to access hin from another LAN (192.168.113.0/24 in this case) it hangs for a really long time before delivering the result. SHOW PROCESSLIST; shows this process in Sleep, State empty. If I strace -p this process I get the following Output (23512 is the PID of the corresponding mysqld process): Process 23512 attached - interrupt to quit restart_syscall(<... resuming interrupted call ...>) = 1 fcntl(10, F_GETFL) = 0x2 (flags O_RDWR) fcntl(10, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(10, {sa_family=AF_INET, sin_port=htons(51696), sin_addr=inet_addr("192.168.113.4")}, [16]) = 33 fcntl(10, F_SETFL, O_RDWR) = 0 rt_sigaction(SIGCHLD, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, ) = 0 getpeername(33, {sa_family=AF_INET, sin_port=htons(51696), sin_addr=inet_addr("192.168.113.4")}, [16]) = 0 getsockname(33, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 open("/etc/hosts.allow", O_RDONLY) = 64 fstat(64, {st_mode=S_IFREG|0644, st_size=580, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(64, "# /etc/hosts.allow: list of host"..., 4096) = 580 read(64, "", 4096) = 0 close(64) = 0 munmap(0x7f9ce9839000, 4096) = 0 open("/etc/hosts.deny", O_RDONLY) = 64 fstat(64, {st_mode=S_IFREG|0644, st_size=880, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(64, "# /etc/hosts.deny: list of hosts"..., 4096) = 880 read(64, "", 4096) = 0 close(64) = 0 munmap(0x7f9ce9839000, 4096) = 0 getsockname(33, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 fcntl(33, F_SETFL, O_RDONLY) = 0 fcntl(33, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(33, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 setsockopt(33, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 fcntl(33, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(33, SOL_IP, IP_TOS, [8], 4) = 0 setsockopt(33, SOL_TCP, TCP_NODELAY, [1], 4) = 0 futex(0x7f9cea5c9564, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7f9cea5c9560, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7f9cea5c6fe0, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1) = 1 ([{fd=10, revents=POLLIN}]) fcntl(10, F_GETFL) = 0x2 (flags O_RDWR) fcntl(10, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(10, {sa_family=AF_INET, sin_port=htons(51697), sin_addr=inet_addr("192.168.113.4")}, [16]) = 31 fcntl(10, F_SETFL, O_RDWR) = 0 rt_sigaction(SIGCHLD, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, ) = 0 getpeername(31, {sa_family=AF_INET, sin_port=htons(51697), sin_addr=inet_addr("192.168.113.4")}, [16]) = 0 getsockname(31, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 open("/etc/hosts.allow", O_RDONLY) = 33 fstat(33, {st_mode=S_IFREG|0644, st_size=580, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(33, "# /etc/hosts.allow: list of host"..., 4096) = 580 read(33, "", 4096) = 0 close(33) = 0 munmap(0x7f9ce9839000, 4096) = 0 open("/etc/hosts.deny", O_RDONLY) = 33 fstat(33, {st_mode=S_IFREG|0644, st_size=880, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(33, "# /etc/hosts.deny: list of hosts"..., 4096) = 880 read(33, "", 4096) = 0 close(33) = 0 munmap(0x7f9ce9839000, 4096) = 0 getsockname(31, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 fcntl(31, F_SETFL, O_RDONLY) = 0 fcntl(31, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(31, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 setsockopt(31, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 fcntl(31, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(31, SOL_IP, IP_TOS, [8], 4) = 0 setsockopt(31, SOL_TCP, TCP_NODELAY, [1], 4) = 0 futex(0x7f9cea5c9564, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7f9cea5c9560, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7f9cea5c6fe0, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1^C <unfinished ...> Process 23512 detached This output repeats itself until the answer gets send. It could take up to 15 Minutes until the request gets served. In the local LAN its a matter of Milliseconds. Why is this and how can I debug this further? [Edit] tcpdump shows a ton of this: 14:49:44.103107 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [S.], seq 1434117703, ack 1793610733, win 14600, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 14:49:44.135187 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 106:145, ack 182, win 4345, length 39 14:49:44.135293 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [P.], seq 182:293, ack 145, win 115, length 111 14:49:44.167025 IP 192.168.X.6.64624 > cassandra-test.mysql: Flags [.], ack 444, win 4280, length 0 14:49:44.168933 IP 192.168.X.6.64626 > cassandra-test.mysql: Flags [.], ack 1, win 4390, length 0 14:49:44.169088 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [P.], seq 1:89, ack 1, win 115, length 88 14:49:44.169672 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 145:171, ack 293, win 4317, length 26 14:49:44.169726 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [P.], seq 293:419, ack 171, win 115, length 126 14:49:44.275111 IP 192.168.X.6.64626 > cassandra-test.mysql: Flags [P.], seq 1:74, ack 89, win 4368, length 73 14:49:44.275131 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [.], ack 74, win 115, length 0 14:49:44.275149 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 171:180, ack 419, win 4286, length 9 14:49:44.275189 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [P.], seq 89:100, ack 74, win 115, length 11 14:49:44.275264 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 180:185, ack 419, win 4286, length 5 14:49:44.275281 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [.], ack 185, win 115, length 0 14:49:44.275295 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [F.], seq 419, ack 185, win 115, length 0 14:49:44.275650 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [F.], seq 185, ack 419, win 4286, length 0 14:49:44.275660 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [.], ack 186, win 115, length 0 14:49:44.275910 IP 192.168.X.6.64627 > cassandra-test.mysql: Flags [S], seq 2336421549, win 8192, options [mss 1351,nop,wscale 2,nop,nop,sackOK], length 0 14:49:44.275921 IP cassandra-test.mysql > 192.168.X.6.64627: Flags [S.], seq 3289359778, ack 2336421550, win 14600, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0

  Read the article

• C signals and processes

  - by Gary

  Hi, so basically I want "cmd_limit" to take a number in seconds which is the maximum time we'll wait for the child process (safe to assume there's only one) to finish. If the child process does finish during the sleep, I want cmd_limit to return pass and not run the rest of the cmd_limit code. Could anyone help me do this, here's what I've got so far.. int cmd_limit( int limit, int pid ) { signal( SIGCHLD, child_died ); sleep( limit ); kill( pid, SIGKILL ); printf("killin'\n"); return PASS; } void child_died( int sig ) { int stat_loc; /* child return information */ int status; /* child return status */ waitpid( -1, &stat_loc, WNOHANG ); if( WIFEXITED(stat_loc) ) { // program exited normally status = WEXITSTATUS( stat_loc ); /* get child exit status */ } printf("child died: %s\n", signal); }

  Read the article

• Find which files an apache process is writing to?

  - by Haluk

  We have this apache process which becomes io-bound time to time. Using atop, we can see it is a write operation. Using lsof -p <PID> we can see a list of files open by the httpd process. First we thought "log" files must be the problem. So we turned them off just to test. However write operations still continues. We will continue testing a few other things. For instance we use php session variables a lot. Maybe php session files are getting all the writing. But is there a way to quickly identify files which get written to by the httpd process? This way we can focus our efforts on those files. UPDATE: We used the strace command as suggested. Here are two lines from the output. write(23, "\27\0\0\0\3SET CHARACTER SET utf8", 27) = 27 write(23, "\17\0\0\0\3SET NAMES utf8", 19) = 19 We do not have a mysql process on this server. So is strace also showing what is being written to an ethernet port? UPDATE2: During high io load, the process which consumes most of the write resources gives the following output to strace -e trace=write -p <PID>: --- SIGCHLD (Child exited) @ 0 (0) --- write(9, "!", 1) = 1 write(19, "OPTIONS * HTTP/1.0\r\nUser-Agent: Apache (internal dummy connection)\r\n\r\n", 70) = 70 However I cannot figure out where these are being written to.

  Read the article

• Why is my cron daemon is being killed every few minutes? OpenVZ?

  - by user113215

  As of about a week ago, my cron daemon refuses to stay running. I'm using Debian 6. Running something like pgrep cron shows that the daemon isn't running. I start the service with service cron start or /etc/init.d/cron start and it launches, but it disappears from the running process list after a few minutes (varying anywhere between 1 - 30 minutes before the process is killed again). Using strace -f service cron start, I can see that the process is being killed for some reason: nanosleep({56, 0}, 0x7fffa7184c80) = 0 stat("crontabs", {st_mode=S_IFDIR|S_ISVTX|0730, st_size=4096, ...}) = 0 stat("/etc/crontab", {st_mode=S_IFREG|0644, st_size=1100, ...}) = 0 stat("/etc/cron.d", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 stat("/etc/cron.d/php5", {st_mode=S_IFREG|0644, st_size=475, ...}) = 0 stat("/etc/cron.d/anacron", {st_mode=S_IFREG|0644, st_size=244, ...}) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 rt_sigaction(SIGCHLD, NULL, {0x4036f0, [CHLD], SA_RESTORER|SA_RESTART, 0x2b0e8465f230}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 nanosleep({60, 0}, <unfinished ...> +++ killed by SIGKILL +++ There's nothing relevant in /var/log/syslog, /var/log/messages, /var/log/auth.log, or /var/log/kern.log to explain why the the process is dying. The system has about 500 MB of free memory, and cat /proc/loadavg returns 0.10 0.21 0.45 so resources shouldn't be the issue. I also tried removing and reinstalling the cron package using apt-get. What else should I check? How do I find out what's killing my crond? Edit: I'm on a virtual machine under OpenVZ (and as such, I have no swap). With cron running, free -m reports: total used free shared buffers cached Mem: 1024 465 558 0 0 0 -/+ buffers/cache: 465 558 Swap: 0 0 0 My OpenVZ User Beancounters via cat /proc/user_beancounters: Version: 2.5 uid resource held maxheld barrier limit failcnt 172087: kmemsize 8275718 25561636 51200000 51200000 0 lockedpages 0 968 2048 2048 0 privvmpages 113442 266465 262200 262200 3740757 shmpages 788 4004 128000 128000 0 dummy 0 0 0 0 0 numproc 39 98 600 600 0 physpages 50521 208434 0 9223372036854775807 0 vmguarpages 0 0 512000 512000 0 oomguarpages 50521 208447 512000 512000 0 numtcpsock 7 323 4096 4096 0 numflock 7 64 2048 2048 0 numpty 1 4 32 32 0 numsiginfo 0 23 1024 1024 0 tcpsndbuf 137984 17878480 20480000 20480000 0 tcprcvbuf 114688 6983504 20480000 20480000 0 othersockbuf 162960 1074440 20480000 20480000 0 dgramrcvbuf 0 24208 10240000 10240000 0 numothersock 101 353 2048 2048 0 dcachesize 459171 747444 10240000 10240000 0 numfile 1010 4221 50000 50000 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 39 424 2048 2048 0

  Read the article

• chrooting user causes "connection closed" message when using sftp

  - by George Reith

  First off I am a linux newbie so please don't assume much knowledge. I am using CentOS 5.8 (final) and using OpenSSH version 5.8p1. I have made a user playwithbits and I am attempting to chroot them to the directory home/nginx/domains/playwithbits/public I am using the following match statement in my sshd_config file: Match group web-root-locked ChrootDirectory /home/nginx/domains/%u/public X11Forwarding no AllowTcpForwarding no ForceCommand /usr/libexec/openssh/sftp-server # id playwithbits returns: uid=504(playwithbits) gid=504(playwithbits) groups=504(playwithbits),507(web-root-locked) I have changed the user's home directory to: home/nginx/domains/playwithbits/public Now when I attempt to sftp in with this user I instantly get the message: connection closed Does anyone know what I am doing wrong? Edit: Following advice from @Dennis Williamson I have connected in debug mode (I think... correct me if I'm wrong). I have made a bit of progress by using chmod to set permissions recursively of all files in the directly to 700. Now I get the following messages when I attempt to log on (still connection refused): Connection from [My ip address] port 38737 debug1: Client protocol version 2.0; client software version OpenSSH_5.6 debug1: match: OpenSSH_5.6 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user playwithbits service ssh-connection method none debug1: attempt 0 failures 0 debug1: user playwithbits matched group list web-root-locked at line 91 debug1: PAM: initializing for "playwithbits" debug1: PAM: setting PAM_RHOST to [My host info] debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user playwithbits service ssh-connection method password debug1: attempt 1 failures 0 debug1: PAM: password authentication accepted for playwithbits debug1: do_pam_account: called Accepted password for playwithbits from [My ip address] port 38737 ssh2 debug1: monitor_child_preauth: playwithbits has been authenticated by privileged process debug1: SELinux support disabled debug1: PAM: establishing credentials User child is on pid 3942 debug1: PAM: establishing credentials Changed root directory to "/home/nginx/domains/playwithbits/public" debug1: permanently_set_uid: 504/504 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 2097152 max 32768 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request env reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req env debug1: server_input_channel_req: channel 0 request subsystem reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req subsystem subsystem request for sftp by user playwithbits debug1: subsystem: cannot stat /usr/libexec/openssh/sftp-server: Permission denied debug1: subsystem: exec() /usr/libexec/openssh/sftp-server debug1: Forced command (config) '/usr/libexec/openssh/sftp-server' debug1: session_new: session 0 debug1: Received SIGCHLD. debug1: session_by_pid: pid 3943 debug1: session_exit_message: session 0 channel 0 pid 3943 debug1: session_exit_message: release channel 0 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from [My ip address]: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials

  Read the article

• 2010 Collaboration Summit Impressions

  - by Elena Zannoni

  It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

  Read the article

• SSH as root using public key still prompts for password on RHEL 6.1

  - by Dean Schulze

  I've generated rsa keys with cygwin ssh-keygen and copied them to the server with ssh-copy-id -i id_rsa.pub [email protected] I've got the following settings in my /etc/ssh/sshd_config file RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys PermitRootLogin yes When I ssh [email protected] it still prompts for a password. The output below from /usr/sbin/sshd -d says that a matching keys was found in the .ssh/authorized_keys file, but it still requires a password from the client. I've read a bunch of web postings about permissions on files and directories, but nothing works. Is it possible to ssh with keys in RHEL 6.1 or is this forbidden? The debug output from ssh and sshd is below. $ ssh -v [email protected] OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012 debug1: Connecting to my.ip.address [my.ip.address] port 22. debug1: Connection established. debug1: identity file /home/dschulze/.ssh/id_rsa type 1 debug1: identity file /home/dschulze/.ssh/id_rsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_dsa type 2 debug1: identity file /home/dschulze/.ssh/id_dsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 9f:00:e0:1e:a2:cd:05:53:c8:21:d5:69:25:80:39:92 debug1: Host 'my.ip.address' is known and matches the RSA host key. debug1: Found key in /home/dschulze/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/dschulze/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering DSA public key: /home/dschulze/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Trying private key: /home/dschulze/.ssh/id_ecdsa debug1: Next authentication method: password Here is the server output from /usr/sbin/sshd -d [root@ga2-lab .ssh]# /usr/sbin/sshd -d debug1: sshd version OpenSSH_5.3p1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: rexec_argv[0]='/usr/sbin/sshd' debug1: rexec_argv[1]='-d' debug1: Bind to port 22 on 0.0.0.0. Server listening on 0.0.0.0 port 22. debug1: Bind to port 22 on ::. Server listening on :: port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8 debug1: inetd sockets after dupping: 3, 3 Connection from 172.60.254.24 port 53401 debug1: Client protocol version 2.0; client software version OpenSSH_6.1 debug1: match: OpenSSH_6.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user root service ssh-connection method none debug1: attempt 0 failures 0 debug1: PAM: initializing for "root" debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 1 failures 0 debug1: test whether pkalg/pkblob are acceptable debug1: PAM: setting PAM_RHOST to "172.60.254.24" debug1: PAM: setting PAM_TTY to "ssh" debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 Postponed publickey for root from 172.60.254.24 port 53401 ssh2 debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 2 failures 0 debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 debug1: ssh_rsa_verify: signature correct debug1: do_pam_account: called Accepted publickey for root from 172.60.254.24 port 53401 ssh2 debug1: monitor_child_preauth: root has been authenticated by privileged process debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: ssh_gssapi_storecreds: Not a GSSAPI mechanism debug1: restore_uid: 0/0 debug1: SELinux support enabled debug1: PAM: establishing credentials PAM: pam_open_session(): Authentication failure debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/pts/1 ssh_selinux_setup_pty: security_compute_relabel: Invalid argument debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 17323 debug1: session_exit_message: session 0 channel 0 pid 17323 debug1: session_exit_message: release channel 0 debug1: session_pty_cleanup: session 0 release /dev/pts/1 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from 172.60.254.24: 11: disconnected by user debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: deleting credentials

  Read the article

• How should I clean up hung grandchild processes when an alarm trips in Perl?

  - by brian d foy

  I have a parallelized automation script which needs to call many other scripts, some of which hang because they (incorrectly) wait for standard input. That's not a big deal because I catch those with alarm. The trick is to shut down those hung grandchild processes when the child shuts down. I thought various incantations of SIGCHLD, waiting, and process groups could do the trick, but they all block and the grandchildren aren't reaped. My solution, which works, just doesn't seem like it is the right solution. I'm not especially interested in the Windows solution just yet, but I'll eventually need that too. Mine only works for Unix, which is fine for now. I wrote a small script that takes the number of simultaneous parallel children to run and the total number of forks: $ fork_bomb <parallel jobs> <number of forks> $ fork_bomb 8 500 This will probably hit the per-user process limit within a couple of minutes. Many solutions I've found just tell you to increase the per-user process limit, but I need this to run about 300,000 times, so that isn't going to work. Similarly, suggestions to re-exec and so on to clear the process table aren't what I need. I'd like to actually fix the problem instead of slapping duct tape over it. I crawl the process table looking for the child processes and shut down the hung processes individually in the SIGALRM handler, which needs to die because the rest of real code has no hope of success after that. The kludgey crawl through the process table doesn't bother me from a performance perspective, but I wouldn't mind not doing it: use Parallel::ForkManager; use Proc::ProcessTable; my $pm = Parallel::ForkManager->new( $ARGV[0] ); my $alarm_sub = sub { kill 9, map { $_->{pid} } grep { $_->{ppid} == $$ } @{ Proc::ProcessTable->new->table }; die "Alarm rang for $$!\n"; }; foreach ( 0 .. $ARGV[1] ) { print "."; print "\n" unless $count++ % 50; my $pid = $pm->start and next; local $SIG{ALRM} = $alarm_sub; eval { alarm( 2 ); system "$^X -le '<STDIN>'"; # this will hang alarm( 0 ); }; $pm->finish; } If you want to run out of processes, take out the kill. I thought that setting a process group would work so I could kill everything together, but that blocks: my $alarm_sub = sub { kill 9, -$$; # blocks here die "Alarm rang for $$!\n"; }; foreach ( 0 .. $ARGV[1] ) { print "."; print "\n" unless $count++ % 50; my $pid = $pm->start and next; setpgrp(0, 0); local $SIG{ALRM} = $alarm_sub; eval { alarm( 2 ); system "$^X -le '<STDIN>'"; # this will hang alarm( 0 ); }; $pm->finish; } The same thing with POSIX's setsid didn't work either, and I think that actually broke things in a different way since I'm not really daemonizing this. Curiously, Parallel::ForkManager's run_on_finish happens too late for the same clean-up code: the grandchildren are apparently already disassociated from the child processes at that point.

  Read the article

• lxc containers hangs after upgrade to 13.10

  - by doug123

  I have 3 lxc containers. They were all working fine on 12.10 and I upgraded the containers with do-release-upgrade on the containers to 13.04 and 13.10 and that worked great. Then I upgraded the host to 13.04 and then 13.10 and now the 3 containers hang with this: >lxc-start -n as1 -l DEBUG -o $(tty) lxc-start 1383145786.513 INFO lxc_start_ui - using rcfile /var/lib/lxc/as1/config lxc-start 1383145786.513 WARN lxc_log - lxc_log_init called with log already initialized lxc-start 1383145786.513 INFO lxc_apparmor - aa_enabled set to 1 lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/2' (5/6) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/13' (7/8) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/14' (9/10) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/15' (11/12) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/17' (13/14) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/18' (15/16) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/19' (17/18) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/20' (19/20) lxc-start 1383145786.514 INFO lxc_conf - tty's configured lxc-start 1383145786.514 DEBUG lxc_start - sigchild handler set lxc-start 1383145786.514 DEBUG lxc_console - opening /dev/tty for console peer lxc-start 1383145786.514 DEBUG lxc_console - using '/dev/tty' as console lxc-start 1383145786.514 DEBUG lxc_console - 6242 got SIGWINCH fd 25 lxc-start 1383145786.514 DEBUG lxc_console - set winsz dstfd:22 cols:177 rows:53 lxc-start 1383145786.514 INFO lxc_start - 'as1' is initialized lxc-start 1383145786.522 DEBUG lxc_start - Not dropping cap_sys_boot or watching utmp lxc-start 1383145786.524 DEBUG lxc_conf - mac address of host interface 'vethB4L35W' changed to private fe:7c:96:a0:ae:29 lxc-start 1383145786.525 DEBUG lxc_conf - instanciated veth 'vethB4L35W/vethVC61K2', index is '26' lxc-start 1383145786.529 DEBUG lxc_cgroup - cgroup 'memory.limit_in_bytes' set to '20G' lxc-start 1383145786.529 DEBUG lxc_cgroup - cgroup 'cpuset.cpus' set to '12-23' lxc-start 1383145786.529 INFO lxc_cgroup - cgroup has been setup lxc-start 1383145786.555 DEBUG lxc_conf - move 'eth0' to '6249' lxc-start 1383145786.555 INFO lxc_conf - 'as1' hostname has been setup lxc-start 1383145786.575 DEBUG lxc_conf - 'eth0' has been setup lxc-start 1383145786.575 INFO lxc_conf - network has been setup lxc-start 1383145786.575 INFO lxc_conf - looking at .44 42 252:0 / / rw,relatime - ext4 /dev/mapper/limitorderbook1-root rw,errors=remount-ro,data=ordered . lxc-start 1383145786.575 INFO lxc_conf - now p is . /. lxc-start 1383145786.575 INFO lxc_conf - looking at .52 44 0:5 / /dev rw,relatime - devtmpfs udev rw,size=32961632k,nr_inodes=8240408,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /dev. lxc-start 1383145786.575 INFO lxc_conf - looking at .61 52 0:11 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,mode=600,ptmxmode=000 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /dev/pts. lxc-start 1383145786.575 INFO lxc_conf - looking at .68 44 0:15 / /run rw,nosuid,noexec,relatime - tmpfs tmpfs rw,size=6594456k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run. lxc-start 1383145786.575 INFO lxc_conf - looking at .69 68 0:18 / /run/lock rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=5120k . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/lock. lxc-start 1383145786.575 INFO lxc_conf - looking at .72 68 0:19 / /run/shm rw,nosuid,nodev,relatime - tmpfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/shm. lxc-start 1383145786.575 INFO lxc_conf - looking at .73 68 0:21 / /run/user rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=102400k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/user. lxc-start 1383145786.575 INFO lxc_conf - looking at .76 44 0:14 / /sys rw,nosuid,nodev,noexec,relatime - sysfs sysfs rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys. lxc-start 1383145786.575 INFO lxc_conf - looking at .77 76 0:16 / /sys/fs/cgroup rw,relatime - tmpfs none rw,size=4k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup. lxc-start 1383145786.575 INFO lxc_conf - looking at .78 77 0:20 / /sys/fs/cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset,clone_children . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuset. lxc-start 1383145786.575 INFO lxc_conf - looking at .79 77 0:23 / /sys/fs/cgroup/cpu rw,relatime - cgroup cgroup rw,cpu . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpu. lxc-start 1383145786.575 INFO lxc_conf - looking at .80 77 0:24 / /sys/fs/cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuacct. lxc-start 1383145786.575 INFO lxc_conf - looking at .81 77 0:25 / /sys/fs/cgroup/memory rw,relatime - cgroup cgroup rw,memory . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/memory. lxc-start 1383145786.575 INFO lxc_conf - looking at .82 77 0:26 / /sys/fs/cgroup/devices rw,relatime - cgroup cgroup rw,devices . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/devices. lxc-start 1383145786.575 INFO lxc_conf - looking at .83 77 0:27 / /sys/fs/cgroup/freezer rw,relatime - cgroup cgroup rw,freezer . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/freezer. lxc-start 1383145786.575 INFO lxc_conf - looking at .84 77 0:28 / /sys/fs/cgroup/blkio rw,relatime - cgroup cgroup rw,blkio . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/blkio. lxc-start 1383145786.575 INFO lxc_conf - looking at .85 77 0:29 / /sys/fs/cgroup/perf_event rw,relatime - cgroup cgroup rw,perf_event . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/perf_event. lxc-start 1383145786.575 INFO lxc_conf - looking at .94 77 0:30 / /sys/fs/cgroup/hugetlb rw,relatime - cgroup cgroup rw,hugetlb . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/hugetlb. lxc-start 1383145786.575 INFO lxc_conf - looking at .95 77 0:31 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime - cgroup systemd rw,name=systemd . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/systemd. lxc-start 1383145786.575 INFO lxc_conf - looking at .96 76 0:17 / /sys/fs/fuse/connections rw,relatime - fusectl none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/fuse/connections. lxc-start 1383145786.575 INFO lxc_conf - looking at .98 76 0:6 / /sys/kernel/debug rw,relatime - debugfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/kernel/debug. lxc-start 1383145786.575 INFO lxc_conf - looking at .101 76 0:10 / /sys/kernel/security rw,relatime - securityfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/kernel/security. lxc-start 1383145786.575 INFO lxc_conf - looking at .102 76 0:22 / /sys/fs/pstore rw,relatime - pstore none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/pstore. lxc-start 1383145786.575 INFO lxc_conf - looking at .103 44 0:3 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /proc. lxc-start 1383145786.575 INFO lxc_conf - looking at .104 44 9:2 / /data rw,relatime - ext4 /dev/md2 rw,errors=remount-ro,data=ordered . lxc-start 1383145786.575 INFO lxc_conf - now p is . /data. lxc-start 1383145786.575 INFO lxc_conf - looking at .105 44 8:1 / /boot rw,relatime - ext2 /dev/sda1 rw,errors=continue . lxc-start 1383145786.575 INFO lxc_conf - now p is . /boot. lxc-start 1383145786.576 DEBUG lxc_conf - mounted '/data/srv/lxc/as1' on '/usr/lib/x86_64-linux-gnu/lxc' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//dev/pts', type 'devpts' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//proc', type 'proc' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//sys', type 'sysfs' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//run', type 'tmpfs' lxc-start 1383145786.576 INFO lxc_conf - mount points have been setup lxc-start 1383145786.577 INFO lxc_conf - console has been setup lxc-start 1383145786.577 INFO lxc_conf - 8 tty(s) has been setup lxc-start 1383145786.577 INFO lxc_conf - rootfs path is ./data/srv/lxc/as1., mount is ./usr/lib/x86_64-linux-gnu/lxc. lxc-start 1383145786.577 INFO lxc_apparmor - I am 1, /proc/self points to 1 lxc-start 1383145786.577 DEBUG lxc_conf - created '/usr/lib/x86_64-linux-gnu/lxc/lxc_putold' directory lxc-start 1383145786.577 DEBUG lxc_conf - mountpoint for old rootfs is '/usr/lib/x86_64-linux-gnu/lxc/lxc_putold' lxc-start 1383145786.577 DEBUG lxc_conf - pivot_root syscall to '/usr/lib/x86_64-linux-gnu/lxc' successful lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/dev/pts' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/lock' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/shm' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/user' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpuset' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpu' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpuacct' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/memory' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/devices' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/freezer' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/blkio' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/perf_event' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/hugetlb' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/systemd' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/fuse/connections' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/kernel/debug' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/kernel/security' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/pstore' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/proc' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/data' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/boot' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/dev' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold' lxc-start 1383145786.577 INFO lxc_conf - created new pts instance lxc-start 1383145786.578 DEBUG lxc_conf - drop capability 'sys_boot' (22) lxc-start 1383145786.578 DEBUG lxc_conf - capabilities have been setup lxc-start 1383145786.578 NOTICE lxc_conf - 'as1' is setup. lxc-start 1383145786.578 DEBUG lxc_cgroup - cgroup 'memory.limit_in_bytes' set to '20G' lxc-start 1383145786.578 DEBUG lxc_cgroup - cgroup 'cpuset.cpus' set to '12-23' lxc-start 1383145786.578 INFO lxc_cgroup - cgroup has been setup lxc-start 1383145786.578 INFO lxc_apparmor - setting up apparmor lxc-start 1383145786.578 INFO lxc_apparmor - changed apparmor profile to lxc-container-default lxc-start 1383145786.578 NOTICE lxc_start - exec'ing '/sbin/init' lxc-start 1383145786.578 INFO lxc_conf - looking at .15 20 0:14 / /sys rw,nosuid,nodev,noexec,relatime - sysfs sysfs rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys. lxc-start 1383145786.578 INFO lxc_conf - looking at .16 20 0:3 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /proc. lxc-start 1383145786.578 INFO lxc_conf - looking at .17 20 0:5 / /dev rw,relatime - devtmpfs udev rw,size=32961632k,nr_inodes=8240408,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /dev. lxc-start 1383145786.578 INFO lxc_conf - looking at .18 17 0:11 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,mode=600,ptmxmode=000 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /dev/pts. lxc-start 1383145786.578 INFO lxc_conf - looking at .19 20 0:15 / /run rw,nosuid,noexec,relatime - tmpfs tmpfs rw,size=6594456k,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /run. lxc-start 1383145786.578 INFO lxc_conf - looking at .20 1 252:0 / / rw,relatime - ext4 /dev/mapper/limitorderbook1-root rw,errors=remount-ro,data=ordered . lxc-start 1383145786.578 INFO lxc_conf - now p is . /. lxc-start 1383145786.578 INFO lxc_conf - looking at .22 15 0:16 / /sys/fs/cgroup rw,relatime - tmpfs none rw,size=4k,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys/fs/cgroup. lxc-start 1383145786.578 INFO lxc_conf - looking at .23 15 0:17 / /sys/fs/fuse/connections rw,relatime - fusectl none rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys/fs/fuse/connections. lxc-start 1383145786.578 INFO lxc_conf - looking at .24 15 0:6 / /sys/kernel/debug rw,relatime - debugfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/kernel/debug. lxc-start 1383145786.579 INFO lxc_conf - looking at .25 15 0:10 / /sys/kernel/security rw,relatime - securityfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/kernel/security. lxc-start 1383145786.579 INFO lxc_conf - looking at .26 19 0:18 / /run/lock rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=5120k . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/lock. lxc-start 1383145786.579 INFO lxc_conf - looking at .27 19 0:19 / /run/shm rw,nosuid,nodev,relatime - tmpfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/shm. lxc-start 1383145786.579 INFO lxc_conf - looking at .28 22 0:20 / /sys/fs/cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset,clone_children . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuset. lxc-start 1383145786.579 INFO lxc_conf - looking at .29 19 0:21 / /run/user rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=102400k,mode=755 . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/user. lxc-start 1383145786.579 INFO lxc_conf - looking at .30 15 0:22 / /sys/fs/pstore rw,relatime - pstore none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/pstore. lxc-start 1383145786.579 INFO lxc_conf - looking at .31 22 0:23 / /sys/fs/cgroup/cpu rw,relatime - cgroup cgroup rw,cpu . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpu. lxc-start 1383145786.579 INFO lxc_conf - looking at .32 22 0:24 / /sys/fs/cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuacct. lxc-start 1383145786.579 INFO lxc_conf - looking at .33 22 0:25 / /sys/fs/cgroup/memory rw,relatime - cgroup cgroup rw,memory . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/memory. lxc-start 1383145786.579 INFO lxc_conf - looking at .34 22 0:26 / /sys/fs/cgroup/devices rw,relatime - cgroup cgroup rw,devices . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/devices. lxc-start 1383145786.579 INFO lxc_conf - looking at .35 22 0:27 / /sys/fs/cgroup/freezer rw,relatime - cgroup cgroup rw,freezer . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/freezer. lxc-start 1383145786.579 INFO lxc_conf - looking at .36 22 0:28 / /sys/fs/cgroup/blkio rw,relatime - cgroup cgroup rw,blkio . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/blkio. lxc-start 1383145786.579 INFO lxc_conf - looking at .37 22 0:29 / /sys/fs/cgroup/perf_event rw,relatime - cgroup cgroup rw,perf_event . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/perf_event. lxc-start 1383145786.579 INFO lxc_conf - looking at .38 22 0:30 / /sys/fs/cgroup/hugetlb rw,relatime - cgroup cgroup rw,hugetlb . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/hugetlb. lxc-start 1383145786.579 INFO lxc_conf - looking at .39 20 9:2 / /data rw,relatime - ext4 /dev/md2 rw,errors=remount-ro,data=ordered . lxc-start 1383145786.579 INFO lxc_conf - now p is . /data. lxc-start 1383145786.579 INFO lxc_conf - looking at .40 20 8:1 / /boot rw,relatime - ext2 /dev/sda1 rw,errors=continue . lxc-start 1383145786.579 INFO lxc_conf - now p is . /boot. lxc-start 1383145786.579 INFO lxc_conf - looking at .41 22 0:31 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime - cgroup systemd rw,name=systemd . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/systemd. lxc-start 1383145786.579 NOTICE lxc_start - '/sbin/init' started with pid '6249' lxc-start 1383145786.579 WARN lxc_start - invalid pid for SIGCHLD <4>init: ureadahead main process (7) terminated with status 5 <4>init: console-font main process (94) terminated with status 1 And it will just sit there like that for hours at least. The container becomes pingable but I can't ssh and if I try lxc-console -n as1 I get a blank screen. If I do lxc-stop -n as1 or ^C in the window where it has hung I get: ^CTERM environment variable not set. <4>init: plymouth-upstart-bridge main process (192) terminated with status 1 <4>init: hwclock-save main process (187) terminated with status 70 * Asking all remaining processes to terminate... ...done. * All processes ended within 1 seconds... ...done. * Deactivating swap... ...fail! mount: cannot mount block device /dev/md2 read-only * Will now restart But after 20 minutes it hasn't restarted. Any ideas why these containers are hanging?

  Read the article

• Can't seem to get C TCP Server-Client Communications Right

  - by Zeesponge

  Ok i need some serious help here. I have to make a TCP Server Client. When the Client connects to server using a three stage handshake. AFterwards... while the Client is running in the terminal, the user enters linux shell commands like xinput list, ls -1, ect... something that uses standard output. The server accepts the commands and uses system() (in a fork() in an infinite loop) to run the commands and the standard output is redirected to the client, where the client prints out each line. Afterward the server sends a completion signal of "\377\n". In which the client goes back to the command prompt asking for a new command and closes its connection and exit()'s when inputting "quit". I know that you have to dup2() both the STDOUT_FILENO and STDERR_FILENO to the clients file descriptor {dup2(client_FD, STDOUT_FILENO). Everything works accept when it comes for the client to retrieve system()'s stdout and printing it out... all i get is a blank line with a blinking cursor (client waiting on stdin). I tried all kinds of different routes with no avail... If anyone can help out i would greatly appreciate it TCP SERVER CODE include #include <sys/socket.h> #include <stdio.h> #include <string.h> #include <netinet/in.h> #include <signal.h> #include <unistd.h> #include <stdlib.h> #include <errno.h> //Prototype void handle_client(int connect_fd); int main() { int server_sockfd, client_sockfd; socklen_t server_len, client_len; struct sockaddr_in server_address; struct sockaddr_in client_address; server_sockfd = socket(AF_INET, SOCK_STREAM, 0); server_address.sin_family = AF_INET; server_address.sin_addr.s_addr = htonl(INADDR_ANY); server_address.sin_port = htons(9734); server_len = sizeof(server_address); bind(server_sockfd, (struct sockaddr *)&server_address, server_len); /* Create a connection queue, ignore child exit details and wait for clients. */ listen(server_sockfd, 10); signal(SIGCHLD, SIG_IGN); while(1) { printf("server waiting\n"); client_len = sizeof(client_address); client_sockfd = accept(server_sockfd, (struct sockaddr *)&client_address, &client_len); if(fork() == 0) handle_client(client_sockfd); else close(client_sockfd); } } void handle_client(int connect_fd) { const char* remsh = "<remsh>\n"; const char* ready = "<ready>\n"; const char* ok = "<ok>\n"; const char* command = "<command>\n"; const char* complete = "<\377\n"; const char* shared_secret = "<shapoopi>\n"; static char server_msg[201]; static char client_msg[201]; static char commands[201]; int sys_return; //memset client_msg, server_msg, commands memset(&client_msg, 0, sizeof(client_msg)); memset(&server_msg, 0, sizeof(client_msg)); memset(&commands, 0, sizeof(commands)); //read remsh from client read(connect_fd, &client_msg, 200); //check remsh validity from client if(strcmp(client_msg, remsh) != 0) { errno++; perror("Error Establishing Handshake"); close(connect_fd); exit(1); } //memset client_msg memset(&client_msg, 0, sizeof(client_msg)); //write remsh to client write(connect_fd, remsh, strlen(remsh)); //read shared_secret from client read(connect_fd, &client_msg, 200); //check shared_secret validity from client if(strcmp(client_msg, shared_secret) != 0) { errno++; perror("Invalid Security Passphrase"); write(connect_fd, "no", 2); close(connect_fd); exit(1); } //memset client_msg memset(&client_msg, 0, sizeof(client_msg)); //write ok to client write(connect_fd, ok, strlen(ok)); // dup2 STDOUT_FILENO <= client fd, STDERR_FILENO <= client fd dup2(connect_fd, STDOUT_FILENO); dup2(connect_fd, STDERR_FILENO); //begin while... while read (client_msg) from server and >0 while(read(connect_fd, &client_msg, 200) > 0) { //check command validity from client if(strcmp(client_msg, command) != 0) { errno++; perror("Error, unable to retrieve data"); close(connect_fd); exit(1); } //memset client_msg memset(&client_msg, 0, sizeof(client_msg)); //write ready to client write(connect_fd, ready, strlen(ready)); //read commands from client read(connect_fd, &commands, 200); //run commands using system( ) sys_return = system(commands); //check success of system( ) if(sys_return < 0) { perror("Invalid Commands"); errno++; } //memset commands memset(commands, 0, sizeof(commands)); //write complete to client write(connect_fd, complete, sizeof(complete)); } } TCP CLIENT CODE #include <sys/types.h> #include <sys/socket.h> #include <stdio.h> #include <string.h> #include <netinet/in.h> #include <arpa/inet.h> #include <unistd.h> #include <stdlib.h> #include <errno.h> #include "readline.c" int main(int argc, char *argv[]) { int sockfd; int len; struct sockaddr_in address; int result; const char* remsh = "<remsh>\n"; const char* ready = "<ready>\n"; const char* ok = "<ok>\n"; const char* command = "<command>\n"; const char* complete = "<\377\n"; const char* shared_secret = "<shapoopi>\n"; static char server_msg[201]; static char client_msg[201]; memset(&client_msg, 0, sizeof(client_msg)); memset(&server_msg, 0, sizeof(server_msg)); /* Create a socket for the client. */ sockfd = socket(AF_INET, SOCK_STREAM, 0); /* Name the socket, as agreed with the server. */ memset(&address, 0, sizeof(address)); address.sin_family = AF_INET; address.sin_addr.s_addr = inet_addr(argv[1]); address.sin_port = htons(9734); len = sizeof(address); /* Now connect our socket to the server's socket. */ result = connect(sockfd, (struct sockaddr *)&address, len); if(result == -1) { perror("ACCESS DENIED"); exit(1); } //write remsh to server write(sockfd, remsh, strlen(remsh)); //read remsh from server read(sockfd, &server_msg, 200); //check remsh validity from server if(strcmp(server_msg, remsh) != 0) { errno++; perror("Error Establishing Initial Handshake"); close(sockfd); exit(1); } //memset server_msg memset(&server_msg, 0, sizeof(server_msg)); //write shared secret text to server write(sockfd, shared_secret, strlen(shared_secret)); //read ok from server read(sockfd, &server_msg, 200); //check ok velidity from server if(strcmp(server_msg, ok) != 0 ) { errno++; perror("Incorrect security phrase"); close(sockfd); exit(1); } //? dup2 STDIN_FILENO = server socket fd? //dup2(sockfd, STDIN_FILENO); //begin while(1)/////////////////////////////////////// while(1){ //memset both msg arrays memset(&client_msg, 0, sizeof(client_msg)); memset(&server_msg, 0, sizeof(server_msg)); //print Enter Command, scan input, fflush to stdout printf("<<Enter Command>> "); scanf("%s", client_msg); fflush(stdout); //check quit input, if true close and exit successfully if(strcmp(client_msg, "quit") == 0) { printf("Exiting\n"); close(sockfd); exit(EXIT_SUCCESS); } //write command to server write(sockfd, command, strlen(command)); //read ready from server read(sockfd, &server_msg, 200); //check ready validity from server if(strcmp(server_msg, ready) != 0) { errno++; perror("Failed Server Communications"); close(sockfd); exit(1); } //memset server_msg memset(&server_msg, 0, sizeof(server_msg)); //begin looping and retrieving from stdin, //break loop at EOF or complete while((read(sockfd, server_msg, 200) != 0) && (strcmp(server_msg, complete) != 0)) { //while((fgets(server_msg, 4096, stdin) != EOF) || (strcmp(server_msg, complete) == 0)) { printf("%s", server_msg); memset(&server_msg, 0, sizeof(server_msg)); } } }

  Read the article

1