silviu ionut radu - Developer IT

Installing Canon LBP6000 in Ubuntu 12.04

- by MMA

This is really frustrating. I am trying to install LBP6000 in Ubuntu 12.04 without any success. (Well, I had success about a week back when I first bought the printer and finally printed pages after a struggle of several hours. Then today it suddenly stopped working and I uninstalled everything and started from scratch. Now, I seem to have lost the way.) My steps Downloaded the latest Canon driver from Canon site. File Linux_CAPT_PrinterDriver_V240_uk_EN.tar.gz Got the radu script (I am allowed only two hyperlinks, so can not put the link here. You can Google radu Canon) Changed the /etc/modprobe.d/blacklist-cups-usblp.conf file as instructed in, Official Documentation. (See the section Ubuntu 12.04 Install). Now this file looks like, # cups talks to the raw USB devices, so we need to blacklist usblp to avoid # grabbing them # blacklist usblp Rebooted my machine Changed the port in radu script to 59787 as instructed in the link at step 3. (Again see the section Ubuntu 12.04 Install, or see the comment at How to Install Canon LBP Printers in Ubuntu. Also put the latest deb files from step 1 in the appropriate directory of this script. Ran the radu script. A printer, LBP6000 got added. Not two printers, one to be disabled, as appeared in the message on the terminal after running the script. sudo /etc/init.d/ccpd status shows, Canon Printer Daemon for CUPS: ccpd: 3142 3139 Results The printer does not print. Printer state (from System Setting-Printing, or at cups http interface localhost:631/printers/LBP6000) goes from Idle to Processing, a job appears in print queue, and then the job disappears and the printer state goes back to Idle. The actual printer does not even blink. Diagnostics (got help from the link in step 3, Troubleshooting) captstatusui -P LBP6000 shows communication error lsmod | grep usblp did not show anything. After running, sudo modprobe usblp, shows usblp 17885 0 However, ls -l /dev/usb/lp0 gives, ls: cannot access /dev/usb/lp0: No such file or directory /var/ccpd did not exist, created, sudo mkdir /var/ccpd sudo mkfifo /var/ccpd/fifo0 sudo chown -R lp:lp /var/ccpd Any suggestion will be appreciated. Do not know what to do.

Read the article

permanently load module

- by Radu

I have a Compaq Presario CQ-61 320SQ, I am using Ubuntu 10.04 because after update to 10.10 my mouse and touchpad won't work, network won't work, sound won't work ... (I managed to fix most of them after almost a month of googling, but not all, my 2 Desktops have no problem with 10.10) so I decided to switch back to 10.04, where I have a problem: My broadband speed is very low beacause of the kernel module r8169, I downloaded the good module r8101 and every time the computer boots have a rc.local entry to fix this. Question: Can I load the modul permanently from a specific location. I heard about /etc/modules but there I need the module name, but I have to load it from a specific path (where is the default path for that) Thank you. So I studied the script: It creates the file r8101.ko in /lib/modules/uname -r/kernel/drivers/net so I think as long as nobody will delete that file, and I don't update the kernel, maybe adding r8108 to /etc/modules will work, and add r8169 to blacklist ... I will give it a try. EDIT2: So I added r8101 to /etc/modules and blacklist r8169 to /etc/modprobe.d/blacklist.conf It still uses the old module, lsmod prints: radu@adu:~$ lsmod | grep r8 r8101 67626 0 r8169 34108 0 mii 4381 1 r8169 EDIT: the module is loaded using this script that came with it: #!/bin/sh # invoke insmod with all arguments we got # and use a pathname, as insmod doesn't look in . by default TARGET_PATH=/lib/modules/`uname -r`/kernel/drivers/net echo echo "Check old driver and unload it." check=`lsmod | grep r8169` if [ "$check" != "" ]; then echo "rmmod r8169" /sbin/rmmod r8169 fi check=`lsmod | grep r8101` if [ "$check" != "" ]; then echo "rmmod r8101" /sbin/rmmod r8101 fi echo "Build the module and install" echo "-------------------------------" >> log.txt date 1>>log.txt make all 1>>log.txt || exit 1 module=`ls src/*.ko` module=${module#src/} module=${module%.ko} if [ "$module" == "" ]; then echo "No driver exists!!!" exit 1 elif [ "$module" != "r8169" ]; then if test -e $TARGET_PATH/r8169.ko ; then echo "Backup r8169.ko" if test -e $TARGET_PATH/r8169.bak ; then i=0 while test -e $TARGET_PATH/r8169.bak$i do i=$(($i+1)) done echo "rename r8169.ko to r8169.bak$i" mv $TARGET_PATH/r8169.ko $TARGET_PATH/r8169.bak$i else echo "rename r8169.ko to r8169.bak" mv $TARGET_PATH/r8169.ko $TARGET_PATH/r8169.bak fi fi fi echo "Depending module. Please wait." depmod -a echo "load module $module" modprobe $module echo "Completed." exit 0

Read the article

Actuate 7 - Resize frame depending on the containing objects

- by Radu Dragomir

I don't know if this is the place to ask this question, but if it is: Is it possible to dynamically resize a frame depending on the objects it contains. Objects inside also resize dynamically according to multiline text size. Thank you, Radu.

Read the article

Notes - Part II - Play with JavaFX

- by Silviu Turuga

Open the project from last lesson Double click on NotesUI.fmxl, this will open the JavaFX Scene Builder On the left side you have a area called Hierarchy, from there press Del or Shift+Backspace on Mac to delete the Button and the Label. You'll receive a warning, that some components have been assigned an fx:id, click Delete as we don't need them anymore. Resize the AnchorPane to have enough room for our design, eg. 820x550px From the top left pick the Container called Accordion and drag over the AnchorPane design Chose then from Controls a List View and drag inside the Accordion. You'll notice that by default the Accordion has 2 TitledPane, and you can switch between them by clicking on their name. I'll let you the pleasure to do the rest in order to get the following result Here is the list of objects used Save it and then return to NetBeans Run the application and it should be run without any issue. If you click on buttons they all are functional, but nothing happens as we didn't link them with any action. We'll see this in the next episode. Now, let's play a little bit with the application and try to resize it… Have you notice the behavior? If the form is too small, some objects aren't visible, if it is too large there is too much space . That's for sure something that your users won't like and you as a programmer have to care about this. From NetBeans double click NotesUI.fmxl so to return back to JavaFX Scene Builder Select the TextField from bottom left of Notes, the one where I put the text Category and then from the right part of JavaFX Scene Builder you'll notice a panel called Inspector. Chose Layout and then click on the dotted lines from left and bottom of the square, like you see in the below image This will make the textfield to have always the same distance from left and bottom no matter the size of the form. Save and run the application. Note that whenever the form is changing the Height, the Category TextField has the same distance from the bottom. Select Accordion and do the same steps but also check the top dotted line, because we want the Accordion to have the same height as the main form has. I'll let you the pleasure to do the same for the rest of components. It's very important to design an application that can be resize by user and in the same time, all the buttons are on place. Last step is to make sure our application is not getting smaller then a certain size, as this will hide parts of our layout. So select the AnchorPane and from Inspector go to Layout and note down the Width and Height. Go back to NetBeans and open the file Main.java and add the following code just after stage.setScene(scene); (around line 26) stage.setMinWidth(820); stage.setMinHeight(550); Use your own width and height. This will prevent user to reduce the width or height of your application to a value that will hide parts of your layout. So now you should have done most of the design part and next time we'll see how can we enter some data into our newly created application… Note: in case you miss something, here are the source files of the project till this point.

Read the article

What's about Java?

- by Silviu Turuga

What is Java? In very short words, Java is a programming language that let you make an application that can be run on different operating systems, no matter we are talking about Windows, Mac OS, Linux or even embedded devices, such as RaspberryPi. When you compile a Java program, instead of getting a binary output as you get on other programming languages, you'll get a Java intermediate code, called Java bytecode. This is interpreted at run time, by a virtual machine that is specifically for the hardware and operating system you are using. What Java do i need? There are 5 major versions of Java: Java SE(Standard Edition) - this is what I'll use on most of my tutorials. Most of the examples will run on Java 6, but for others you'll need Java 7. Java EE (Enterprise Edition) - used for enterprise development Java ME (Micro Edition) - for running Java on mobile and different embedded devices such as PDAs, TV set-top boxes, printers, etc. Java Embedded - for some embedded devices such as Raspberry Pi, where the resources are limited JavaFX - to develop rich content User Interfaces. This is also something that will use a lot. More detailed information can be found on Oracle's website If you just want to run java applications you'll need the JRE (Java Runtime Environment) installed. If you want to program and create new applications, then you'll need the JDK (Java Development Kit). How to check if Java is already installed? From command line, if you are on Windows, or from Terminal on Mac enter the following: java -version You should get something like this, if you have java installed on your system: java version "1.6.0_37" Java(TM) SE Runtime Environment (build 1.6.0_37-b06-434-11M3909) Java HotSpot(TM) 64-Bit Server VM (build 20.12-b01-434, mixed mode) Note: your current Java version might be different from mine. More information https://www.java.com/en/download/faq/whatis_java.xml http://en.wikipedia.org/wiki/Java_(programming_language) Next steps Install Java SDK Chose an IDE. I recommend NetBeans as it is very easy to use and also let you quickly create the GUI of your application Alternatives are Eclipse, Komodo Edit (for Mac), etc. There are plenty of solutions both free or paid. Resources on web Oracle Tutorials - lot of tutorials and useful resources JavaRanch - forum about java

Read the article

Notes - Part I - Say Hello from Java

- by Silviu Turuga

Sometimes we need to take small notes to remember things, one way to do this is to use stick notes and have them all around our desktop. But what happening if you have a lot of notes and a small office? You'll need a piece of software that will sort things for you and also it will provide you a quick way to retrieve the notes when need. Did I mention that this will keep your desktop clean and also will reduce paper waste? During the next days we'll gonna create an application that will let you manage your notes, put them in different categories etc. I'll show you step by step what do you need to do and finally you'll have the application run on multiple systems, such as Mac, Windows, Linux, etc. The only pre-requisition for this lesson is to have JDK 7 with JavaFX installed and an IDE, preferably NetBeans. I'll call this application Notes…. Part I - Say Hello from Java From NetBeans go to Files->New Project Chose JavaFX->JavaFX FXML Application Project Name: Notes FXML name: NotesUI Check Create Application Class and name it Main After this the project is created and you'll see the following structure As a best practice I advice you to have your code in your own package instead of the default one. right click on Source Packages and chose New->Java Package name it something like this: com.turuga.notes and click Next after the package is created, select all the 3 files from step #3 and drag them over the new package chose Refactor, as this will make sure all the references are correctly moved inside the new package now you should have the following structure if you'll try to run the project you'll get an error: Unable to find class: Main right click on project name Notes and click properties go to Run and you'll see Application Class set to Main, but because we have defined our own packages, this location has been change, so click on Browse and the correct one appear: com.turuga.notes.Main last modification before running the project is to right click on NotesUI.fxml and chose Edit (if you'll double click it will open in JavaFX Scene Builder) look around line 9 and change fx:controller="NotesUIController" to fx:controller="com.turuga.notes.NotesUIController" now you are ready to run it and you should see the following On the next lesson we'll continue to play with NetBeans and start working on the interface of our project

Read the article

Static objects and concurrency in a web application

- by Ionut

I'm developing small Java Web Applications on Tomcat server and I'm using MySQL as my database. Up until now I was using a connection singleton for accessing the database but I found out that this will ensure just on connection per Application and there will be problems if multiple users want to access the database in the same time. (They all have to make us of that single Connection object). I created a Connection Pool and I hope that this is the correct way of doing things. Furthermore it seems that I developed the bad habit of creating a lot of static object and static methods (mainly because I was under the wrong impression that every static object will be duplicated for every client which accesses my application). Because of this all the Service Classes ( classes used to handle database data) are static and distributed through a ServiceFactory: public class ServiceFactory { private static final String JDBC = "JDBC"; private static String impl; private static AccountService accountService; private static BoardService boardService; public static AccountService getAccountService(){ initConfig(); if (accountService == null){ if (impl.equalsIgnoreCase(JDBC)){ accountService = new JDBCAccountService(); } } return accountService; } public static BoardService getBoardService(){ initConfig(); if (boardService == null){ if (impl.equalsIgnoreCase(JDBC)){ boardService = new JDBCBoardService(); } } return boardService; } private static void initConfig(){ if (StringUtil.isEmpty(impl)){ impl = ConfigUtil.getProperty("service.implementation"); // If the config failed initialize with standard if (StringUtil.isEmpty(impl)){ impl = JDBC; } } } This was the factory class which, as you can see, allows just one Service to exist at any time. Now, is this a bad practice? What happens if let's say 1k users access AccountService simultaneously? I know that all this questions and bad practices come from a bad understanding of the static attribute in a web application and the way the server handles this attributes. Any help on this topic would be more than welcomed. Thank you for your time!

Read the article

Splitting big request in multiple small ajax requests

- by Ionut

I am unsure regarding the scalability of the following model. I have no experience at all with large systems, big number of requests and so on but I'm trying to build some features considering scalability first. In my scenario there is a user page which contains data for: User's details (name, location, workplace ...) User's activity (blog posts, comments...) User statistics (rating, number of friends...) In order to show all this on the same page, for a request there will be at least 3 different database queries on the back-end. In some cases, I imagine that those queries will be running quite a wile, therefore the user experience may suffer while waiting between requests. This is why I decided to run only step 1 (User's details) as a normal request. After the response is received, two ajax requests are sent for steps 2 and 3. When those responses are received, I only place the data in the destined wrappers. For me at least this makes more sense. However there are 3 requests instead of one for every user page view. Will this affect the system on the long term? I'm assuming that this kind of approach requires more resources but is this trade of UX for resources a good dial or should I stick to one plain big request?

Read the article

Is it better to build HTML Code string on the server or on the client side?

- by Ionut

The result of the following process should be a html form. This form's structure varies from one to user. For example there might be a different number of rows or there may be the need for rowspan and colspan. When the user chooses to see this table an ajax call is made to the server where the structure of the table is decided from the database. Then I have to create the html code for the table structure which will be inserted in the DOM via JavaScript. The following problem comes to my mind: Where should I build the HTML code which will be inserted in the DOM? On the server side or should I send some parameters in the ajax call method and process the structure there? Therefore the main question involves good practice when it comes to decide between Server side processing or client side processing. Thank you!

Read the article

Session serialization in JavaEE environment

- by Ionut

Please consider the following scenario: We are working on a JavaEE project for which the scalability starts to become an issue. Up until now, we were able to scale up but this is no longer an option. Therefore we need to consider scaling out and preparing the App for a clustered environment. Our main concern right now is serializing the user sessions. Sadly, we did not consider from the beginning the issue and we are encountering the following excetion: java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: org.apache.catalina.session.StandardSessionFacade I did some research and this exception is thrown because there are objects stored on the session which does not implement the Serializable interface. Considering that all over the app there are quite a few custom objects which are stored on the session without implementing this interface, it would require a lot of tedious work and dedication to fix all these classes declaration. We will fix all this declarations but the main concern is that, in the future, there may be a developer which will add a non Serializable object on the session and break the session serialization & replication over multiple nodes. As a quick overview of the project, we are developing using a home grown framework based on Struts 1 with the Servlet 3.0 API. This means that at this point, we are using the standard session.getAttribute() and session.setAttribute() to work with the session and the session handling is scattered all over the code base. Besides updating the classes of the objects stored on session and making sure that they implement the Serializable interface, what other measures of precaution should we take in order to ensure a reliable Session replication capability on the Application layer? I know it is a little bit late to consider this but what would be the best practice in this case? Furthermore, are there any other issues we should consider regarding this transition? Thank you in advance!

Read the article

Complete deployment to AWS

- by Ionut

I'm trying to deploy a Java Application to AWS free tier. I need the following: RDS provider. Using MySQL client S3 service. This is required for the Lucene Index and image uploading SES service. I need to be able to send emails to new registered users. Namecheap is my domain provider. EC2 instance Elastic Beanstalk instance. I managed to create an EC2 instance, upload the WAR file and link it to the Namecheap domain. However I find it difficult to link the other instances to the current application. I find the documentation a little messy and I can't find the right way to do this. Can you provide a simple walk through to deployment for this use case? Thanks!

Read the article

Symfony user authentication using Active Directory

- by Radu Dragomir

Is there a way to authenticate users in symfony apps using Active Directory? Can you please point out some documentation? edit What i need is to have a transparent login in my application. The user authenticates once at windows logon, then all applications should be accessed with the same credentials without being asked for the domain\username and password again. I tried the following in a simple php script: if (!isset($_SERVER['PHP_AUTH_USER'])) { header('WWW-Authenticate: Basic realm="my realm"'); header('HTTP/1.0 401 Unauthorized'); exit; } else { echo "<p>Hello {$_SERVER['PHP_AUTH_USER']}.</p>"; echo "<p>You entered {$_SERVER['PHP_AUTH_PW']} as your password.</p>"; } but then i get the authentication form popped up. Is there any way to pass the header the credentials used at windows logon? Thanks, Radu.

Read the article

Save user favorites

- by Radu D

Hi, In my application I need to display items to the user. He can mark some items as favorites. I need to display those differently. How can I save the favorites on the user's computer? I need something like a config entry ... but I need to change that as the user add/remove the favorites. Do you think that I should save that in registry ... or on the disk in a separate file? Does .net offers some support for such situations? Thanks, Radu

Read the article

Why there are many guest accounts?

- by Radu Radeanu

After I saw this answer, I realized that there are many guest accounts on my system: grep guest /etc/passwd guest-jzXeRx:x:117:127:Guest,,,:/tmp/guest-jzXeRx:/bin/false guest-l5dAPU:x:118:128:Guest,,,:/tmp/guest-l5dAPU:/bin/false guest-FdSAkw:x:119:129:Guest,,,:/tmp/guest-FdSAkw:/bin/false guest-eBU0cU:x:121:131:Guest,,,:/tmp/guest-eBU0cU:/bin/false Moreover, in this moment there is nobody logged as guest, but if somebody will login as guest, a new guest account is created - why, since there are already other guest accounts? After the new guest will log out, his account will be deleted. But why the other guest accounts remain? For what use/purpose? It doesn't mind me at all this guest account, but I want to know if it is okay to delete them manually.

Read the article

Can I use PBOs for textures in iOS?

- by Radu

As far as I can see, there is no GL_PIXEL_UNPACK_BUFFER. Also, the OpenGL ES 2.0 specification (and as far as I know, no iOS device currently supports OpenGL ES 2.0) states that glMapBufferOES() can only use GL_ARRAY_BUFFER as a target, yet glTexImage2D() and glTexSubImage2D() only seem to use PBOs if GL_PIXEL_UNPACK_BUFFER is bound. The OpenGL documentation for glBindBuffer() also states that: GL_PIXEL_PACK_BUFFER and GL_PIXEL_UNPACK_BUFFER are available only if the GL version is 2.1 or greater. So, can I use PBOs for textures? Am I missing something obvious?

Read the article

How do I get a Canon LBP5000 Printer working?

- by Saigun

I have unsuccessfully attempted to install a Canon LBP5000 printer on Ubuntu 11.10. I have attempted all possible methods to be found on the web, but nothing seems to work. My latest attempt was Radu Cotescu's script from http://radu.cotescu.com/how-to-install-canon-lbp-printers-in-ubuntu/ Using the script everything appears to work as described during the installation process, but when attempting to actually print, it remains stuck in “processing” (regardless of what I attempt to print) [There is no additional error message]. Could anyone help me? It would be very much appreciated!

Read the article

Keep a programming language backwards compatible vs. fixing its flaws

- by Radu Murzea

First, some context (stuff that most of you know anyway): Every popular programming language has a clear evolution, most of the time marked by its version: you have Java 5, 6, 7 etc., PHP 5.1, 5.2, 5.3 etc. Releasing a new version makes new APIs available, fixes bugs, adds new features, new frameworks etc. So all in all: it's good. But what about the language's (or platform's) problems? If and when there's something wrong in a language, developers either avoid it (if they can) or they learn to live with it. Now, the developers of those languages get a lot of feedback from the programmers that use them. So it kind of makes sense that, as time (and version numbers) goes by, the problems in those languages will slowly but surely go away. Well, not really. Why? Backwards compatibility, that's why. But why is this so? Read below for a more concrete situation. The best way I can explain my question is to use PHP as an example: PHP is loved thousands of people and hated by just as many thousands. All languages have flaws, but apparently PHP is special. Check out this blog post. It has a very long list of so called flaws in PHP. Now, I'm not a PHP developer (not yet), but I read through all of it and I'm sure that a big chunk of that list are indeed real issues. (Not all of it, since it's potentially subjective). Now, if I was one of the guys who actively develops PHP, I would surely want to fix those problems, one by one. However, if I do that, then code that relies on a particular behaviour of the language will break if it runs on the new version. Summing it up in 2 words: backwards compatibility. What I don't understand is: why should I keep PHP backwards compatible? If I release PHP version 8 with all those problems fixed, can't I just put a big warning on it saying: "Don't run old code on this version !"? There is a thing called deprecation. We had it for years and it works. In the context of PHP: look at how these days people actively discourage the use of the mysql_* functions (and instead recommend mysqli_* and PDO). Deprecation works. We can use it. We should use it. If it works for functions, why shouldn't it work for entire languages? Let's say I (the developer of PHP) do this: Launch a new version of PHP (let's say 8) with all of those flaws fixed New projects will start using that version, since it's much better, clearer, more secure etc. However, in order not to abandon older versions of PHP, I keep releasing updates to it, fixing security issues, bugs etc. This makes sense for reasons that I'm not listing here. It's common practice: look for example at how Oracle kept updating version 5.1.x of MySQL, even though it mostly focused on version 5.5.x. After about 3 or 4 years, I stop updating old versions of PHP and leave them to die. This is fine, since in those 3 or 4 years, most projects will have switched to PHP 8 anyway. My question is: Do all these steps make sense? Would it be so hard to do? If it can be done, then why isn't it done? Yes, the downside is that you break backwards compatibility. But isn't that a price worth paying ? As an upside, in 3 or 4 years you'll have a language that has 90 % of its problems fixed.... a language much more pleasant to work with. Its name will ensure its popularity. EDIT: OK, so I didn't expressed myself correctly when I said that in 3 or 4 years people will move to the hypothetical PHP 8. What I meant was: in 3 or 4 years, people will use PHP 8 if they start a new project.

Read the article

My screen turns off when I watch movies on YouTube [duplicate]

- by Radu Radeanu

This question already has an answer here: How to prevent my screen from dimming when watching YouTube? 4 answers When I use VLC or other media player, I can watch the movie until the end without touching the PC. If I watch a movie on YouTube using Chromium or Firefox my screen will turn off as is set in System Settings Brightness and Lock. How to prevent this without to change the settings in Brightness and Lock. Edit: My Ubuntu 13.04 with Gnome 3.6.3.1 uses gnome-screensaver (I didn't installed any other screensaver).

Read the article

How do I get an Canon Pixma MP150 to print?

- by Radu Erdei

I succesfully installed my Canon Pixma MP150 printer (and scanner) in Ubuntu 12.04, made it the default printer, but i cannot print anything. Watching the printing queue, i see that the printer receives my documents but just for a few seconds after which the queue gets empty without anything getting actually printed. I tried to print from large pdf's to quite tiny txt files. I reinstalled the printer from cups web-based interface (127.0.0.1:631) but again, no luck. Any ideea on the matter?

Read the article

DNS Server (2008 r2) MMC The server DC01 could not be contacted. The error was: Access was denied

- by Silviu-Ionut Radu

I've just migrated the AD with the whole nine yards, FSMO, PDC, RID, Schema, etc, from an SBS 2003 to a Win 2008 R2 Std. I have managed to have no error in the dcdiag before I demoted the SBS 2003 from the AD, fsmocheck, conectivity, advertising, dns, etc. The SBS 2003 demoted successfully. After this step I have restarted both, the old SBS and the new Win 2008 r2. After restart the new DC (which is the GC) started with an Access denied to the DNS Server MMC, actually it is looking like I would try to connect to the 2008 r2 DNS server from an older server console I can NOT manage DNS server through MMC nor through dnscmd (Command failed: ERROR_ACCESS_DENIED 5 0x5) I cannot even use the Action Option from the DNS Server MMC because all the options are DISABLED but for "Launch nslookup". I've made a lot of research on the internet but no luck, yet. So I come to ask for help. Thank you very much.

Read the article

Asterisk Connection not working

- by Tamas Ionut

I have installed Asterisk on VirtualBox by following the steps from here. Everything went ok until I got to navigate to an IP to configure Asterisk using FreePBX: 10.0.2.15 (Shouldn't be something like 192.168.x.y?? ). However, when I navigated to that url from outside of VirtualBox, that url pointed to nothing. Also I am logged in as root@localhost. Should I be logged in as root@server? I have also validated the installation as described here and everything went well. I am a complete beginner at Asterisk.

Read the article

understanding mount -o bind

- by Ionut

Few questions after the following commands: mount -o bind /new_disk/home/user/ /home/user/ mount -o bind --no-mtab /new_disk/home/user/ /home/user/ What is the difference between the two commands other than " Mount without writing in /etc/mtab. This is necessary for example when /etc is on a read-only filesystem." What is the difference between mount -o bind and mount --bind ...if there are Let's suppose i don't know there is a partition mounted using -o bind --no-mtab...where can I find if there is any mound point with bind ? The only way i can detect this is grep user /proc/mounts but in that line there is no info abut bind. Thank you.

Read the article

List of ALL iPhone/Android apps

- by Ionut

Is there, somewhere on the web, a list of all apps for iPhone and Android? I don't own a mobile phone (with iPhone/Android), and I would like to browse the apps from my computer.

Read the article

Explicit behavior with checks vs. implicit behavior

- by Silviu

I'm not sure how to construct the question but I'm interested to know what do you guys think of the following situations and which one would you prefer. We're working at a client-server application with winforms. And we have a control that has some fields automatically calculated upon filling another field. So we're having a field currency which when filled by the user would determine an automatic filling of another field, maybe more fields. When the user fills the currency field, a Currency object would be retrieved from a cache based on the string introduced by the user. If entered currency is not found in the cache a null reference is returned by the cache object. Further down when asking the application layer to compute the other fields based on the currency, given a null currency a null specific field would be returned. This way the default, implicit behavior is to clear all fields. Which is the expected behavior. What i would call the explicit implementation would be to verify that the Currency object is null in which case the depending fields are cleared explicitly. I think that the latter version is more clear, less error prone and more testable. But it implies a form of redundancy. The former version is not as clear and it implies a certain behavior from the application layer which is not expressed in the tests. Maybe in the lower layer tests but when the need arises to modify the lower layers, so that given a null currency something else should be returned, i don't think a test that says just that without a motivation is going to be an impediment for introducing a bug in upper layers. What do you guys think?

Read the article

mysqld causes high CPU load

- by Radu

Search Results

Search found 74 results on 3 pages for 'silviu ionut radu'.

Page 1/3 | 1 2 3 | Next Page >

- by MMA

- by Radu

- by Radu Dragomir

- by Silviu Turuga

- by Silviu Turuga

- by Silviu Turuga

- by Ionut

- by Ionut

- by Ionut

- by Ionut

- by Ionut

- by Radu Dragomir

- by Radu D

- by Radu Radeanu

- by Radu

- by Saigun

- by Radu Murzea

- by Radu Radeanu

- by Radu Erdei

- by Silviu-Ionut Radu

- by Tamas Ionut

- by Ionut

- by Ionut

- by Silviu

- by Radu

1 2 3 | Next Page >