Search Results

Search found 734 results on 30 pages for 'steven xu'.

Page 1/30 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Wine 1.6.2-Trying to switch to 32-bit Wineprefix from 64-bit Wine (Trusty 14.04). Can anyone help me out?

  - by AlternateSteve90

  Hello fellow Ubuntu users, I'm having a little trouble with Wine 1.6.1 and I was wondering if someone could help me out. I recently downloaded some 32-bit games that I'd wanted to try(BeamNG Drive and Bugbear's Next Car Game demo) and I had run into some trouble trying to get either of these games to run. So I came across a couple pieces of advice on the 'Net, one here on the Ubuntu community site and the other at BeamNG's forums, on how to create a 32-bit wineprefix on a 64-bit setup. I managed to be able to create the wine32 folder, but now I'm having trouble making it my default Wine setup. Anybody have any idea how I can do that? I'll post the URLs for said advice, btw: http://www.beamng.com/threads/1788-Installing-DRIVE-under-Linux-via-Wine How do I create a 32-bit WINE prefix? Here's what I've tried so far in the Terminal: steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/user/wine32' WINEARCH='win32' wine 'wineboot' wine: chdir to /home/user/wine32 : No such file or directory steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' wine: created the configuration directory '/home/steven/wine32' fixme:storage:create_storagefile Storage share mode not implemented. err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot fixme:storage:create_storagefile Storage share mode not implemented. fixme:iphlpapi:NotifyAddrChange (Handle 0x10ee890, overlapped 0x10ee89c): stub wine: configuration in '/home/steven/wine32' has been updated. steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX=$HOME/.wine32 wine dxsetup.exe wine: created the configuration directory '/home/steven/.wine32' fixme:storage:create_storagefile Storage share mode not implemented. err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot fixme:storage:create_storagefile Storage share mode not implemented. fixme:iphlpapi:NotifyAddrChange (Handle 0x103e2b8, overlapped 0x103e2d0): stub fixme:storage:create_storagefile Storage share mode not implemented. fixme:iphlpapi:NotifyAddrChange (Handle 0x10fe890, overlapped 0x10fe89c): stub wine: configuration in '/home/steven/.wine32' has been updated. wine: cannot find L"C:\windows\system32\dxsetup.exe" steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEARCH=win64 winecfgsteven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEARCH=win32 winecfg wine: WINEARCH set to win32 but '/home/steven/.wine' is a 64-bit installation. steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/user/wine32' WINEARCH='win32' wine 'wineboot' wine: chdir to /home/user/wine32 : No such file or directory steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX=/home/steven/wine32 WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX=/home/steven/wine32 WINEARCH=win32 wine wineboot steven@steven-HP-Pavilion-17-Notebook-PC:~$ So, yeah. TBH, though, I'm far from an expert and perhaps I've been going about it all the wrong way. In the meantime, I'll try to keep looking for solutions on my own, but if anybody can help me solve this dilemma, especially if anyone happens to own any of these two games in particular, I'd appreciate it. :)

  Read the article

• GNOME PPP doesn't connect

  - by Motorhead

  I am a new ubuntu user and connect to the internet using wi-fi broadband on my notebook. But I need to setup a dial-up connection through my phone which can keep me online while I travel. I have tried connecting to dial-up using pppconfig, wvdial and gnome-ppp. I do not know whether they use the same files for connecting but I have only been able to connect using Gnome-ppp. But the connection is intermittent and disconnects every five seconds or so. The exit code is 16 which I checked in man and got to know that the modem hangs itself up. I am connecting my phone to ubuntu as a usb modem. And as I am new I might have skipped a step or two. Please suggest a solution or an alternative to this. I have put down the Gnome-ppp log. Thanks. --> WvDial: Internet dialer version 1.61 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized. --> Sending: ATM1L3DT*99***1# --> Waiting for carrier. ATM1L3DT*99***1# CONNECT --> Carrier detected. Waiting for prompt. ~[7f]}#@!}!}$} }=}!}$}%\}"}&} } } } }#}%B#}%}%}&}*urW}'}"}(}"mX~ --> PPP negotiation detected. --> Starting pppd at Sat Apr 28 21:55:55 2012 --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied --> --> CHAP (Challenge Handshake) may be flaky. --> Pid of pppd: 2459 --> Using interface ppp0 --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> Disconnecting at Sat Apr 28 21:56:01 2012 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 5 seconds --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized. --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized. --> Sending: ATM1L3DT*99***1# --> Waiting for carrier. ATM1L3DT*99***1# CONNECT --> Carrier detected. Waiting for prompt. ~[7f]}#@!}!Q} }=}!}$}%\}"}&} } } } }#}%B#}%}%}&}*u69}'}"}(}"#W~ --> PPP negotiation detected. --> Starting pppd at Sat Apr 28 21:56:07 2012 --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied --> --> CHAP (Challenge Handshake) may be flaky. --> Pid of pppd: 2470 --> Using interface ppp0 --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> Disconnecting at Sat Apr 28 21:56:09 2012 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 10 seconds --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized. --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized. --> Sending: ATM1L3DT*99***1# --> Waiting for carrier. ATM1L3DT*99***1# CONNECT --> Carrier detected. Waiting for prompt. ~[7f]}#@!}!@} }=}!}$}%\}"}&} } } } }#}%B#}%}%}&}*uvM}'}"}(}"p}$~ --> PPP negotiation detected. --> Starting pppd at Sat Apr 28 21:56:20 2012 --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied --> --> CHAP (Challenge Handshake) may be flaky. --> Pid of pppd: 2481 --> Using interface ppp0 --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> Disconnecting at Sat Apr 28 21:56:25 2012 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 20 seconds --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized.

  Read the article

• Join 2 children tables with a parent tables without duplicated

  - by user1847866

  Problem I have 3 tables: People, Phones and Emails. Each person has an UNIQUE ID, and each person can have multiple numbers or multiple emails. Simplified it looks like this: +---------+----------+ | ID | Name | +---------+----------+ | 5000003 | Amy | | 5000004 | George | | 5000005 | John | | 5000008 | Steven | | 8000009 | Ashley | +---------+----------+ +---------+-----------------+ | ID | Number | +---------+-----------------+ | 5000005 | 5551234 | | 5000005 | 5154324 | | 5000008 | 2487312 | | 8000009 | 7134584 | | 5000008 | 8451384 | +---------+-----------------+ +---------+------------------------------+ | ID | Email | +---------+------------------------------+ | 5000005 | [email protected] | | 5000005 | [email protected] | | 5000008 | [email protected] | | 5000008 | [email protected] | | 5000008 | [email protected] | | 8000009 | [email protected] | | 5000004 | [email protected] | +---------+------------------------------+ I am trying to joining them together without duplicates. It works great, when I try to join only Emails with People or only Phones with People. SELECT People.Name, People.ID, Phones.Number FROM People LEFT OUTER JOIN Phones ON People.ID=Phones.ID ORDER BY Name, ID, Number; +----------+---------+-----------------+ | Name | ID | Number | +----------+---------+-----------------+ | Steven | 5000008 | 8451384 | | Steven | 5000008 | 24887312 | | John | 5000005 | 5551234 | | John | 5000005 | 5154324 | | George | 5000004 | NULL | | Ashley | 8000009 | 7134584 | | Amy | 5000003 | NULL | +----------+---------+-----------------+ SELECT People.Name, People.ID, Emails.Email FROM People LEFT OUTER JOIN Emails ON People.ID=Emails.ID ORDER BY Name, ID, Email; +----------+---------+------------------------------+ | Name | ID | Email | +----------+---------+------------------------------+ | Steven | 5000008 | [email protected] | | Steven | 5000008 | [email protected] | | Steven | 5000008 | [email protected] | | John | 5000005 | [email protected] | | John | 5000005 | [email protected] | | George | 5000004 | [email protected] | | Ashley | 8000009 | [email protected] | | Amy | 5000003 | NULL | +----------+---------+------------------------------+ However, when I try to join Emails and Phones on People - I get this: SELECT People.Name, People.ID, Phones.Number, Emails.Email FROM People LEFT OUTER JOIN Phones ON People.ID = Phones.ID LEFT OUTER JOIN Emails ON People.ID = Emails.ID ORDER BY Name, ID, Number, Email; +----------+---------+-----------------+------------------------------+ | Name | ID | Number | Email | +----------+---------+-----------------+------------------------------+ | Steven | 5000008 | 8451384 | [email protected] | | Steven | 5000008 | 8451384 | [email protected] | | Steven | 5000008 | 8451384 | [email protected] | | Steven | 5000008 | 24887312 | [email protected] | | Steven | 5000008 | 24887312 | [email protected] | | Steven | 5000008 | 24887312 | [email protected] | | John | 5000005 | 5551234 | [email protected] | | John | 5000005 | 5551234 | [email protected] | | John | 5000005 | 5154324 | [email protected] | | John | 5000005 | 5154324 | [email protected] | | George | 5000004 | NULL | [email protected] | | Ashley | 8000009 | 7134584 | [email protected] | | Amy | 5000003 | NULL | NULL | +----------+---------+-----------------+------------------------------+ What happens is - if a Person has 2 numbers, all his emails are shown twice (They can not be sorted! which means they can not be removed by @last) What I want: Bottom line, playing with the @last, I want to end up with somethig like this, but @last won't work if I don't arrange ORDER columns in the righ way - and this seems like a big problem..Orderin the email column. Because seen from the example above: Steven has 2 phone number and 3 emails. The JOIN Emails with Numbers happens with each email - thus duplicated values that can not be sorted (SORT BY does not work on them). **THIS IS WHAT I WANT** +----------+---------+-----------------+------------------------------+ | Name | ID | Number | Email | +----------+---------+-----------------+------------------------------+ | Steven | 5000008 | 8451384 | [email protected] | | | | 24887312 | [email protected] | | | | | [email protected] | | John | 5000005 | 5551234 | [email protected] | | | | 5154324 | [email protected] | | George | 5000004 | NULL | [email protected] | | Ashley | 8000009 | 7134584 | [email protected] | | Amy | 5000003 | NULL | NULL | +----------+---------+-----------------+------------------------------+ Now I'm told that it's best to keep emails and number in separated tables because one can have many emails. So if it's such a common thing to do, what isn't there a simple solution? I'd be happy with a PHP Solution aswell. What I know how to do by now that satisfies it, but is not as pretty. If I do it with GROUP_CONTACT I geat a satisfactory result, but it doesn't look as pretty: I can't put a "Email type = work" next to it. SELECT People.Ime, GROUP_CONCAT(DISTINCT Phones.Number), GROUP_CONCAT(DISTINCT Emails.Email) FROM People LEFT OUTER JOIN Phones ON People.ID=Phones.ID LEFT OUTER JOIN Emails ON People.ID=Emails.ID GROUP BY Name; +----------+----------------------------------------------+---------------------------------------------------------------------+ | Name | GROUP_CONCAT(DISTINCT Phones.Number) | GROUP_CONCAT(DISTINCT Emails.Email) | +----------+----------------------------------------------+---------------------------------------------------------------------+ | Steven | 8451384,24887312 | [email protected],[email protected],[email protected] | | John | 5551234,5154324 | [email protected],[email protected] | | George | NULL | [email protected] | | Ashley | 7134584 | [email protected] | | Amy | NULL | NULL | +----------+----------------------------------------------+---------------------------------------------------------------------+

  Read the article

• 7-zip archive with hard links?

  - by Steven Penny

  I see that tar respects hard links $ ln clonezilla.iso test.iso $ tar cfvvJ archive.tar.xz *.iso -rw-r--r-- Steven 111149056 2012-03-25 07:34 clonezilla.iso hrw-r--r-- Steven 0 2012-03-25 07:34 test.iso link to clonezilla.iso 7-Zip does not do this $ 7z a -mx=9 archive.7z *.iso $ ls -l -rw-r--r-- 1 Steven 212827496 Apr 17 07:40 archive.7z -rw-r--r-- 1 Steven 105073772 Apr 17 07:38 archive.tar.xz Is there a way to make 7-Zip respect hard links? gnu.org/software/tar/manual/html_node/hard-links

  Read the article

• EBS Techstack Sessions at OAUG/Collaborate 2010

  - by Steven Chan

  We have a large contingent of E-Business Suite Applications Technology Group staff rolling out to the OAUG/Collaborate 2010 conference in Las Vegas new week.  Our Applications Technology Group staff will be appearing as guest speakers or full-speakers at the following E-Business Suite technology stack related sessions:Database Special Interest GroupSunday, April 18, 11:00 AM, Breakers FSIG Leaders:  Michael Brown, Colibri; Sandra Vucinic, Vlad GroupGuest Speaker:  Steven ChanCovering database upcoming and past desupport dates, and database support policies as they apply to E-Business Suite environments, general Q&A E-Business Suite Technology Stack Special Interest GroupSunday, April 18, 3:00 PM, Breakers FSIG Leaders:  Elke Phelps, Paul Jackson, HumanaGuest Speaker:  Steven ChanCovering the latest EBS technology stack certifications, roadmap, desupport noticesupgrade options for Discoverer, OID, SSO, Portal, general Q&A E-Business Suite Applications Technology Roadmap & VisionMonday, April 19, 8:00 AM, South Seas GOracle Speaker:  Uma PrabhalaLatest developments for SOA, AOL, OAF, Web ADI, SES, AMP, ACMP, security, and other technologies Oracle E-Business Suite Applications Strategy and General Manager UpdateMonday, April 19, 2:30 PM, Mandalay Bay Ballroom DOracle Speaker:  Cliff GodwinUpdate on the entire Oracle E-Business Suite product line. The session covers the value delivered by the current release of Oracle E-Business Suite applications, the momentum, and how Oracle E-Business Suite applications integrate into Oracle's overall applications strategy 10 Things You Can Do Today to Prepare for the Next Generation ApplicationsTuesday, April 20, 8:00 AM, South Seas FOracle Speaker:  Nadia Bendjedou"Common sense" and "practical" steps that can be taken today to increase the value of your Oracle Applications (E-Business Suite, PeopleSoft, Siebel, and JDE) investments by using the latest Oracle solutions and technologiesReducing TCO using Oracle E-Business Suite Management PacksTuesday, April 20, 10:30 AM, South Seas EOracle Speaker:  Angelo RosadoLearn how you can reduce the Total Cost of Ownership by implementing Application Management Pack (AMP) and Application Change Management Pack (ACP) for E-Business Suite 11i, R12, R12.1. AMP is Oracle's next generation system manageability product offering that provides a centralized platform to manage and maintain EBS. ACP is Oracle's offering to monitor and manage E-Business Suite changes in the areas of E-Business Suite Customizations, Patches and Functional Setups. E-Business Suite Upgrade Special Interest GroupTuesday, April 20, 3:15 PM, South Seas ESIG Leaders:  John Stouffer; Sandra Vucinic, Vlad GroupGuest Speaker:  Steven ChanParticipating in general Q&A E-Business Suite Technology Essentials: Using the Latest Oracle Technologies with E-Business Suite Wednesday, April 21, 8:00 AM, South Seas HOracle Speaker:  Lisa ParekhOracle continues to build new functionality into the Oracle Database, Fusion Middleware, and Enterprise Manager. Come see how you can enhance the value of E-Business Suite for your users and lower your costs of ownership by utilizing the latest features of these Oracle technologies with E-Business Suite. Learn about the latest advanced E-Business Suite topologies and features, including new options for security, performance, third-party integration, SOA, virtualization, clouds, systems management, and much more How to Leverage the New E-Business Suite R12.1 Solutions Without Upgrading your 11.5.10 EnvironmentWednesday, April 21, 10:30 AMOracle Speaker:  Nadia Bendjedou, South Seas ELearn how you can use the latest E-Business Suite 12.1 standalone solutions without upgrading from your E-Business Suite 11.5.10 environment Web 2.0 User Experience and Oracle Fusion Middleware Integration with Oracle E-Business SuiteWednesday, April 21, 4:00 PM, South Seas FOracle Speaker:  Padmaprabodh AmbaleSee the next generation Oracle E-Business Suite OA framework improvements that will provide new rich interactions in components such as LOV, Tables and Attachments.  See  new components like the Rich Container that allows any Web 2.0 content like Flash or OBIEE to be embedded in OA Framework pages. Advanced Technology Deployment Architectures for E-Business Suite Wednesday, April 21, 2:15 PM, South Seas EOracle Speaker:  Steven ChanLearn how to take advantage of the latest version of Oracle Fusion Middleware with Oracle E-Business Suite. Learn how to utilize identity management systems and LDAP directories. In addition, come to this session for answers about advanced network deployments involving reverse proxy servers, load balancers, and DMZ's, and to see how you can take benefit from virtualization and new system management capabilities. Upgrading to Oracle E-Business Suite 12.1 - Best PracticesThursday, April 22, 11:00 AM, South Seas EOracle Speaker:  Lester Gutierrez, Udayan ParvateFundamental of upgrading to Release 12.1, which includes the technology stack components and differences, the upgrade path from various releases of Oracle E-Business Suite, upgrade steps, monitoring the upgrade, hints and tips for minimizing downtime and upgrade best practices for making the upgrade to Release 12.1 a success.  We look forward to seeing you there!

  Read the article

• expecting tASSOC in a Rails file

  - by steven_noble

  I'm sure I've done something stupid here, but I just can't see it. I call the breadcrumb method in the application view. app/helpers/breadcrumbs_helper.rb says: module BreadcrumbsHelper def breadcrumb @crumb_list = [] drominay_crumb_builder project_crumb_builder content_tag(:div, :id => "breadcrumbs", @crumb_list.map { |list_item| crumb_builder(list_item) }) end def crumb_builder(list_item) if list_item == @crumb_list.last content_tag(:span, list_item['body'], :class => list_item['crumb']) else body = ["list_item['body']", "&nbsp;&#x2192;&nbsp;"].join link_to(body, list_item['url'], :class => list_item['crumb']) end end def drominay_crumb_builder list_item = Hash.new list_item['body'] = "Drominay" list_item['url'] = "root" @crumb_list << list_item end def project_crumb_builder end end Why oh why am I getting this "expecting tASSOC" error? (And what is a tASSOC anyway?) steven-nobles-imac-200:drominay steven$ script/server => Booting Mongrel (use 'script/server webrick' to force WEBrick) => Rails 2.2.2 application starting on http://0.0.0.0:3000 => Call with -d to detach => Ctrl-C to shutdown server ** Starting Mongrel listening at 0.0.0.0:3000 ** Starting Rails with development environment... Exiting /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `gem_original_require': /Users/steven/Drominay/app/helpers/breadcrumbs_helper.rb:7: syntax error, unexpected ')', expecting tASSOC (SyntaxError) /Users/steven/Drominay/app/helpers/breadcrumbs_helper.rb:29: syntax error, unexpected $end, expecting kEND from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `require' from /Library/Ruby/Gems/1.8/gems/activesupport-2.2.2/lib/active_support/dependencies.rb:153:in `require' from /Library/Ruby/Gems/1.8/gems/activesupport-2.2.2/lib/active_support/dependencies.rb:521:in `new_constants_in' from /Library/Ruby/Gems/1.8/gems/activesupport-2.2.2/lib/active_support/dependencies.rb:153:in `require' from /Users/steven/Drominay/app/helpers/application_helper.rb:5 from /Library/Ruby/Gems/1.8/gems/activesupport-2.2.2/lib/active_support/dependencies.rb:382:in `load_without_new_constant_marking' from /Library/Ruby/Gems/1.8/gems/activesupport-2.2.2/lib/active_support/dependencies.rb:382:in `load_file' from /Library/Ruby/Gems/1.8/gems/activesupport-2.2.2/lib/active_support/dependencies.rb:521:in `new_constants_in' ... 56 levels... from /Users/steven/.gem/ruby/1.8/gems/rails-2.2.2/lib/commands/server.rb:49 from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `require' from script/server:3

  Read the article

• Remove words enclosed in parenthesis

  - by Maverick50

  How do I remove words enclosed in parenthesis in Word 2007 Example: From this: Michael Winkelman (Ben), Steven Benson (Joey), To This: Michael Winkelman, Steven Benson,

  Read the article

• Same domain only : smtp; 5.1.0 - Unknown address error 530-'SMTP authentication is required

  - by user124672

  I have a very strange problem after moving my netwave.be domain from WebHost4Life to Arvixe. I configured several email adresses, like [email protected] and [email protected]. For POP3 I can use mail.netwave.be, a mailserver hosted by Arvixe. However, for SMTP I have to use relay.skynet.be. Skynet (Belgacom) is one of the biggest internet providers in Belgium and blocks smtp requests to external mailservers. So for years I've been using relay.skynet.be to send my messages using [email protected] as the sender. The worked perfectly. After moving my domain to Arvixe, this is no longer the case. I can send emails to people, no problem. I have received emails too, so I suspect that's ok too. But I can't send emails from one user of my domain to another user. For example, if I send a mail from [email protected] to [email protected], relay.skynet.be picks up the mail just fine. A few seconds later, I get a 'Delivery Status Notification (Failure)' mail that contains: Reporting-MTA: dns; mailrelay012.isp.belgacom.be Final-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 (permanent failure) Remote-MTA: dns; [69.72.141.4] Diagnostic-Code: smtp; 5.1.0 - Unknown address error 530-'SMTP authentication is required.' (delivery attempts: 0) Like I said, this only seems to be the case when both the sender and recipient are adresses of a domain hosted by Arvixe. I have serveral accounts not related to Arvixe at all. I can use relay.skynet.be to send mail to [email protected] using these accounts. Likewise, I can use relay.skynet.be to send mail from [email protected] to these accounts. but not from one Arvixe account to another. I hope I have clearly outlined the problem and someone will be able to help me.

  Read the article

• linq select m:n user:groups

  - by cduke

  Hi guys, I've got three tables: cp_user (id, name) cp_group (id, name) cp_usergroup (user_id, group_id) the classical m:n stuff. Assume the following Data: cp_user 1, Paul 2, Steven cp_group 1, Admin 2, Editor cp_usergroup 1, 1 1, 2 2, 2 So Paul is in the Admin AND Editor group, while Steven is just in the Editor group. I want to generate a list like that from the database: Paul Admin Paul Editor Steven Editor Any suggestions? Thanks! Clemens

  Read the article

• Remove words enclosed in parenthesis [closed]

  - by Maverick50

  How do I remove words enclosed in parenthesis in Word 2007 Example: From this: Michael Winkelman (Ben), Steven Benson (Joey), To This: Michael Winkelman, Steven Benson,

  Read the article

• Pure virtual or abstract, what's in a name?

  - by Steven Jeuris

  While discussing a question about virtual functions on Stack Overflow, I wondered whether there was any official naming for pure (abstract) and non-pure virtual functions. I always relied on wikipedia for my information, which states that pure and non-pure virtual functions are the general term. Unfortunately, the article doesn't back it up with a origin or references. To quote Jon Skeet's answer to my reply that pure and non-pure are the general term used: @Steven: Hmm... possibly, but I've only ever seen it in the context of C++ before. I suspect anyone talking about them is likely to have a C++ background :) Did the terms originate from C++, or were they first defined or implemented in a earlier language, and are they the 'official' scientific terms?

  Read the article

• Bash script throws, "syntax error near unexpected token `}'" when ran

  - by Tab00

  I am trying to write a script to monitor some battery statuses on a laptop running as a server. To accomplish this, I have already started to write this code: #! /bin/bash # A script to monitor battery statuses and send out email notifications #take care of looping the script for (( ; ; )) do #First, we check to see if the battery is present... if(cat /proc/acpi/battery/BAT0/state | grep 'present: *' == present: yes) { #Code to execute if battery IS present #No script needed for our application #you may add scripts to run } else { #if the battery IS NOT present, run this code sendemail -f [email protected] -t 214*******@txt.att.net -u NTA TV Alert -m "The battery from the computer is either missing, or removed. Please check ASAP." -s smtp.gmail.com -o tls=yes -xu [email protected] -xp *********** } #Second, we check into the current state of the battery if(cat /proc/acpi/battery/BAT0/state | grep 'charging state: *' == 'charging state: charging') { #Code to execute if battery is charging sendemail -f [email protected] -t 214*******@txt.att.net -u NTA TV Alert -m "The battery from the computer is charging. This MIGHT mean that something just happened" -s smtp.gmail.com -o tls=yes -xu [email protected] -xp *********** } #If it isn't charging, is it discharging? else if(cat /proc/acpi/battery/BAT0/state | grep 'charging state: *' == 'charging state: discharging') { #Code to run if the battery is discharging sendemail -f [email protected] -t 214*******@txt.att.net -u NTA TV Alert -m "The battery from the computer is discharging. This shouldn't be happening. Please check ASAP." -s smtp.gmail.com -o tls=yes -xu [email protected] -xp *********** } #If it isn't charging or discharging, is it charged? else if(cat /proc/acpi/battery/BAT0/state | grep 'charging state: *' == 'charging state: charged') { #Code to run if battery is charged } done I'm pretty sure that most of the other stuff works correctly, but I haven't been able to try it because it will not run. whenever I try and run the script, this is the error that I get: ./BatMon.sh: line 15: syntax error near unexpected token `}' ./BatMon.sh: ` }' is the error something super simple like a forgotten semicolon? Thanks -Tab00

  Read the article

• How can I view Hebrew characters on my English Windows 7?

  - by Steven

  Hi all, I need to view a text file that contains hebrew characters, how can I do this on Windows 7? I don't want to change my default language to Hebrew just view the file. Thanks Steven

  Read the article

• Windows 7 Sysprep unattended doesn't work!

  - by Steven

  Hi all, I have a Windows 7 machine that I have run Sysprep on using the following command Sysprep /generalize /oobe /shutdown /unattend:c:\sysprep.xml When the PC shutsdown I upload it to my Windows Deployment Server (2008 R2), when I turn the PC back on the unattended install works fine, if I download the image from the deployment server it ignores the unattended install and I get prompted for all the settings. Any ideas why this would be? Many many thanks Steven

  Read the article

• How can I view Hebrew characters on my English Windows 7?

  - by Steven

  Hi all, I need to view a text file that contains hebrew characters, how can I do this on Windows 7? I don't want to change my default language to Hebrew just view the file. Thanks Steven

  Read the article

• SSAO Distortion

  - by Robert Xu

  I'm currently (attempting) to add SSAO to my engine, except it's...not really work, to say the least. I use a deferred renderer to render my scene. I have four render targets: Albedo, Light, Normal, and Depth. Here are the parameters for all of them (Surface Format, Depth Format): Albedo: 32-bit ARGB, Depth24Stencil8 Light: 32-bit ARGB, None Normal: 32-bit ARGB, None Depth: 8-bit R (Single), Depth24Stencil8 To generate my random noise map for the SSAO, I do the following for each pixel in the noise map: Vector3 v3 = Vector3.Zero; double z = rand.NextDouble() * 2.0 - 1.0; double r = Math.Sqrt(1.0 - z * z); double angle = rand.NextDouble() * MathHelper.TwoPi; v3.X = (float)(r * Math.Cos(angle)); v3.Y = (float)(r * Math.Sin(angle)); v3.Z = (float)z; v3 += offset; v3 *= 0.5f; result[i] = new Color(v3); This is my GBuffer rendering effect: PixelInput RenderGBufferColorVertexShader(VertexInput input) { PixelInput pi = ( PixelInput ) 0; pi.Position = mul(input.Position, WorldViewProjection); pi.Normal = mul(input.Normal, WorldInverseTranspose); pi.Color = input.Color; pi.TPosition = pi.Position; pi.WPosition = input.Position; return pi; } GBufferTarget RenderGBufferColorPixelShader(PixelInput input) { GBufferTarget output = ( GBufferTarget ) 0; float3 position = input.TPosition.xyz / input.TPosition.w; output.Albedo = lerp(float4(1.0f, 1.0f, 1.0f, 1.0f), input.Color, ColorFactor); output.Normal = EncodeNormal(input.Normal); output.Depth = position.z; return output; } And here is the SSAO effect: float4 EncodeNormal(float3 normal) { return float4((normal.xyz * 0.5f) + 0.5f, 0.0f); } float3 DecodeNormal(float4 encoded) { return encoded * 2.0 - 1.0f; } float Intensity; float Size; float2 NoiseOffset; float4x4 ViewProjection; float4x4 ViewProjectionInverse; texture DepthMap; texture NormalMap; texture RandomMap; const float3 samples[16] = { float3(0.01537562, 0.01389096, 0.02276565), float3(-0.0332658, -0.2151698, -0.0660736), float3(-0.06420016, -0.1919067, 0.5329634), float3(-0.05896204, -0.04509097, -0.03611697), float3(-0.1302175, 0.01034653, 0.01543675), float3(0.3168565, -0.182557, -0.01421785), float3(-0.02134448, -0.1056605, 0.00576055), float3(-0.3502164, 0.281433, -0.2245609), float3(-0.00123525, 0.00151868, 0.02614773), float3(0.1814744, 0.05798516, -0.02362876), float3(0.07945167, -0.08302628, 0.4423518), float3(0.321987, -0.05670302, -0.05418307), float3(-0.00165138, -0.00410309, 0.00537362), float3(0.01687791, 0.03189049, -0.04060405), float3(-0.04335613, -0.00530749, 0.06443053), float3(0.8474263, -0.3590308, -0.02318038), }; sampler DepthSampler = sampler_state { Texture = DepthMap; MipFilter = Point; MinFilter = Point; MagFilter = Point; AddressU = Clamp; AddressV = Clamp; AddressW = Clamp; }; sampler NormalSampler = sampler_state { Texture = NormalMap; MipFilter = Linear; MinFilter = Linear; MagFilter = Linear; AddressU = Clamp; AddressV = Clamp; AddressW = Clamp; }; sampler RandomSampler = sampler_state { Texture = RandomMap; MipFilter = Linear; MinFilter = Linear; MagFilter = Linear; }; struct VertexInput { float4 Position : POSITION0; float2 TextureCoordinates : TEXCOORD0; }; struct PixelInput { float4 Position : POSITION0; float2 TextureCoordinates : TEXCOORD0; }; PixelInput SSAOVertexShader(VertexInput input) { PixelInput pi = ( PixelInput ) 0; pi.Position = input.Position; pi.TextureCoordinates = input.TextureCoordinates; return pi; } float3 GetXYZ(float2 uv) { float depth = tex2D(DepthSampler, uv); float2 xy = uv * 2.0f - 1.0f; xy.y *= -1; float4 p = float4(xy, depth, 1); float4 q = mul(p, ViewProjectionInverse); return q.xyz / q.w; } float3 GetNormal(float2 uv) { return DecodeNormal(tex2D(NormalSampler, uv)); } float4 SSAOPixelShader(PixelInput input) : COLOR0 { float depth = tex2D(DepthSampler, input.TextureCoordinates); float3 position = GetXYZ(input.TextureCoordinates); float3 normal = GetNormal(input.TextureCoordinates); float occlusion = 1.0f; float3 reflectionRay = DecodeNormal(tex2D(RandomSampler, input.TextureCoordinates + NoiseOffset)); for (int i = 0; i < 16; i++) { float3 sampleXYZ = position + reflect(samples[i], reflectionRay) * Size; float4 screenXYZW = mul(float4(sampleXYZ, 1.0f), ViewProjection); float3 screenXYZ = screenXYZW.xyz / screenXYZW.w; float2 sampleUV = float2(screenXYZ.x * 0.5f + 0.5f, 1.0f - (screenXYZ.y * 0.5f + 0.5f)); float frontMostDepthAtSample = tex2D(DepthSampler, sampleUV); if (frontMostDepthAtSample < screenXYZ.z) { occlusion -= 1.0f / 16.0f; } } return float4(occlusion * Intensity * float3(1.0, 1.0, 1.0), 1.0); } technique SSAO { pass Pass0 { VertexShader = compile vs_3_0 SSAOVertexShader(); PixelShader = compile ps_3_0 SSAOPixelShader(); } } However, when I use the effect, I get some pretty bad distortion: Here's the light map that goes with it -- is the static-like effect supposed to be like that? I've noticed that even if I'm looking at nothing, I still get the static-like effect. (you can see it in the screenshot; the top half doesn't have any geometry yet it still has the static-like effect) Also, does anyone have any advice on how to effectively debug shaders?

  Read the article

• Scaling background without scaling foreground in platformer?

  - by David Xu

  I'm currently developing a platform game and I've run into a problem with scaling resolutions. I want a different resolution of the game to still display the foreground unscaled (characters, tiles, etc) but I want the background to be scaled to fit into the window. To explain this better, my viewport has 4 variables: (x, y, width, height) where x and y are the top left corner and width and height are the dimensions. These can be either 800x600, 1024x768 or 1280x960. When I design my levels, I design everything for the highest resolution (1280x960) and expect the game engine to scale it down if a user is running in a lower resolution. I have tried the following to make it work but nothing I've come up with solves it so far: scale = view->width/1280; drawX = x * scale; drawY = y * scale; (this makes the translation too small for low resolution) and scale = view->width/1280; bgWidth = background->width*scale; bgHeight = background->height*scale; drawX = x + background->width/2 - bgWidth/2; drawY = y + background->height/2 - bgHeight/2; (this makes the translation completely wrong at the edges of the map) The thing is, no matter what resolution the game is run at, the map remains the same size, and the foreground is unscaled. (With a lower resolution you just see less of the foreground in the viewport) I was wondering if anyone had any idea how to solve this problem? Thank you in advance!

  Read the article

• Does iframe affect SEO of its parent page?

  - by Xu Jiawan

  I would like to know that, does iframe affect the SEO of its parent page (the page contains iframe)? I've done some searching, such as Do we still need to avoid using frame/iframe for good SEO? and Using iFrame: SEO and Accessibility Points, which tell me that: The content in an iframe is not considered part of the parent page. The page within an iframe may be spidered and indexed (or it may be not) but no PR is definitely passed. But these are the content in the iframe, what about the parent page? Does the PageRank of the parent page will decrease because the iframe? Or maybe Googlebot wouldn't crawl the parent page? Or is the parent page not affected at all?

  Read the article

• Process arbitrarily large lists without explicit recursion or abstract list functions?

  - by Erica Xu

  This is one of the bonus questions in my assignment. The specific questions is to see the input list as a set and output all subsets of it in a list. We can only use cons, first, rest, empty?, empty, lambda, and cond. And we can only define exactly once. But after a night's thinking I don't see it possible to go through the arbitrarily long list without map or foldr. Is there a way to perform recursion or alternative of recursion with only these functions?

  Read the article

• How is this word document encoded?

  - by Steven Lee

  Hi all, We have a program that was written for us by a developer that we can no longer contact, the program opens word documents (forms) that we use in our company, you can tell they are Word documents as the 'Word' toolbar displays with this custom program and we can see the .doc files on the hard drive, the Save button is disabled in the program and when we open the .doc files in word the encoding is not standard as the forms are unreadable but look perfect in the custom program. If we can word out how he has done this we can hopefully convert the 100's of forms that we use. One of the .doc files can be download below, I've scanned it for viruses, it's clean. If anyone can tell me how we can fix this I'd be very grateful. http://www.2shared.com/document/Vb06LUmP/C4-002_Amenity_Fund_Constituti.html? Many thanks Steven

  Read the article

• Memory usage on debian webserver keeps going up

  - by Steven De Groote

  my webserver is running apache 1.3.x for a PHP application, along with mysql on the same machine. Most of the time it runs fine, CPU usage still with nice margin, but somehow memory usage keeps growing throughout uptime. While it looks like it is chunked from time to time, I've had moments my server going down because it's out of memory. Restarting apache or mysql only reduced memusage by 100M. Attached is an overview of monthly memory usage. The 2 massive drops are server restarts after out-of-memory situations. http://imageshack.us/photo/my-images/51/memorymonth.png/ Any explanations for his behaviour or how I could solve this? Thanks! Steven

  Read the article

• Is there a way to automatically strip out trailing whitespace in code on commit to CVS?

  - by Steven Swart

  Hi! We're using CVS, on every release we have to synchronise two different branches of code, and in every release cycle it's the same story, whitespace problems causing errors and wasting time. I'm looking for a way to automatically strip out trailing whitespace upon committing a file to CVS, unless explicitly forbidden, say by a command-line option. Is there a solution already available? If not, would anyone be interested if I wrote a plugin to do this? Regards, Steven

  Read the article

• links for 2010-03-30

  - by Bob Rhubart

  Antony Reynolds: How is Oracle SOA Suite 11g better than a lawn tractor? SOA author Antony Reynolds describes the correct order for cold-starting an Oracle SOA Suite 11g installation. (tags: otn oracle soasuite soa) Steven Chan: Business Continuity for EBS Using Oracle 11g Physical Standby DB Steven Chan reports shares links to two new documents covering the use of Oracle Data Guard to create physical standby databases for Oracle E-Business Suite environments. (tags: oracle otn ebusinesssuite database) @soatoday: Enterprise Architecture IS Arbitrary "Maybe my opinion is biased because I come from a Software background," says Oracle ACE Director Jordan Braunstein, "but I often think Enterprise Architecture is an Art that is trying to apply a Science." (tags: oracle otn oracleace entarch enterprisearchitecture)

  Read the article

• Pro ASP.NET MVC Framework Review

  - by Ben Griswold

  Early in my career, when I wanted to learn a new technology, I’d sit in the bookstore aisle and I’d work my way through each of the available books on the given subject.  Put in enough time in a bookstore and you can learn just about anything. I used to really enjoy my time in the bookstore – but times have certainly changed.  Whereas books used to be the only place I could find solutions to my problems, now they may be the very last place I look.  I have been working with the ASP.NET MVC Framework for more than a year.  I have a few projects and a couple of major deployments under my belt and I was able to get up to speed with the framework without reading a single book*.  With so many resources at our fingertips (podcasts, screencasts, blogs, stackoverflow, open source projects, www.asp.net, you name it) why bother with a book? Well, I flipped through Steven Sanderson’s Pro ASP.NET MVC Framework a few months ago. And since it is prominently displayed in my co-worker’s office, I tend to pick it up as a reference from time to time.  Last week, I’m not sure why, I decided to read it cover to cover.  Man, did I eat this book up.  Granted, a lot of what I read was review, but it was only review because I had already learned lessons by piecing the puzzle together for myself via various sources. If I were starting with ASP.NET MVC (or ASP.NET Web Deployment in general) today, the first thing I would do is buy Steven Sanderson’s Pro ASP.NET MVC Framework and read it cover to cover. Steven Sanderson did such a great job with this book! As much as I appreciated the in-depth model, view, and controller talk, I was completely impressed with all the extra bits which were included.  There a was nice overview of BDD, view engine comparisons, a chapter dedicated to security and vulnerabilities, IoC, TDD and Mocking (of course), IIS deployment options and a nice overview of what the .NET platform and C# offers.  Heck, Sanderson even include bits about webforms! The book is fantastic and I highly recommend it – even if you think you’ve already got your head around ASP.NET MVC.  By the way, procrastinators may be in luck.  ASP.NET MVC V2 Framework can be pre-ordered.  You might want to jump right into the second edition and find out what Sanderson has to say about MVC 2. * Actually, I did read through the free bits of Professional ASP.NET MVC 1.0.  But it was just a chapter – albeit a really long chapter.

  Read the article

• ArchBeat Link-o-Rama for November 8, 2012

  - by Bob Rhubart

  Webcast: Meeting Customer Expectations in the New Age of Retail Keep your eye on this live webcast as Sanjeev Sharma (Principal Product Director, Oracle Exalogic), Kelly Goetsch (Senior Principal Product Manager, Oracle Commerce), and Dan Conway (Senior Product Manager, Oracle Retail) offer real-world examples of business value derived by running customer-facing applications on Oracle Engineered Systems. Live, Thursday Nov 8, 10am PT/ 1pm ET. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." — Irving Wladawsky-Berger SOA Still Not Dead: Ratification of Governance Standard Highlights SOA’s Continued Relevance So just about the time I dig into Google Trends to learn that the conversation about governance peaked in 2004, along comes all this InfoQ article by Richard Seroter. And of course you've already listened to the OTN Archbeat Podcast about governance, right? Right? Implications of Java 6 End of Public Updates for Oracle E-Business Suite Users | Steven Chan The short version is: "Nothing will change for EBS users after February 2013." According to Steven Chan, "EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6." You'll find additional information on Steven's blog. ADF Mobile Custom Javascript – iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. How Data and BPM are married to get the right information to the right people at the right time | Leon Smiers "Business Process Management…supports a large group of stakeholders within an organization, all with different needs," says Oracle ACE Leon Smiers. "End-to-end processes typically run across departments, stakeholders and applications, and can often have a long life-span. So how do organizations provide all stakeholders with the information they need?" Leon provides answers in this post. Thought for the Day "(When) asking skilled architects…what they do when confronted with highly complex problems…(they) would most likely answer, 'Just use Common Sense.' (A) better expression than 'common sense' is 'contextual sense' — a knowledge of what is reasonable within a given content. Practicing architects through eduction, experience and examples accumulate a considerable body of contextual sense by the time they're entrusted with solving a system-level problem…" — Eberhardt Rechtin (January 16, 1926 – April 14, 2006) Source: SoftwareQuotes.com

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >