Search Results

Search found 8 results on 1 pages for 'stu2000'.

Page 1/1 | 1 

• Setting PIdgin up for Lync2013

  - by Stu2000

  I having difficulty setting up pidgin to work with my company's microsoft 365's communicator lync 2013 (not 2010) account. I either receive a message stating authentication failed, or Incompatible authentication scheme chosen: NTLM depending upon the user agent values used from this wiki It appears that both the user agent values that start with UCCAPI provide authentication failed error, which I'm guessing is "closer" to the solution. I have triple checked that the password is correct. Below are some images of my settings (I have changed the company name to "company" for annonymity. I am running pidgin with a script in order to fix a write error issue: export NSS_SSL_CBC_RANDOM_IV=0 pidgin -d I am also using the latest version of SIPE (1.10.1) by using this ppa: https://launchpad.net/~aavelar/+archive/ppa What settings do I need to change/add to get it to work?

  Read the article

• smartctl not returning on HBA that's secure-erasing a different drive

  - by Stu2000

  Whenever I run smartctl -i /dev/sd* where * is a drive that is plugged into the same host bus adapter as another drive that is currently being erased with an hdparm secure erase command, the smart command will just 'hang' and not return (blocked) until the erasure of the other drive is finished. To make matters worse you can't cntrl-c out of it. Has anyone else had this issue? Is there another way to retrieve smart data from a drive, which doesn't block? I noticed that I can still use the udevadm command to retrieve the serial and model of the drive which is useful but doesn't appear to have any smart data. Any information relating to this matter is appreciated, especially if you can tell me another way to retrieve the S.M.A.R.T data that might work. Regards, Stuart

  Read the article

• Networking not starting - OpenVZ default Ubuntu 12.04 Template

  - by Stu2000

  I have been using HyperVM to deploy OpenVZ Ubuntu 12.04 server instances. Unfortunately, they all boot without networking enabled. I tried inserting int the crontab: @reboot /usr/sbin/service networking restart But this didn't work. Running this command (without @reboot) from the CLI will result in the network starting and being able to use commands like ifconfig so I get the feeling it is just a matter of the cron being called too soon? What is the best practice for resolving the issue. I am guessing something along the lines of adding an upstart job?

  Read the article

• ubuntu cobbler server - importing distros

  - by Stu2000

  I setup and fully configured ubuntu-12.04-server machine with cobbler/dhcp running in about 10 minutes (compared to taking over an hour on centos 5.8). I discovered the cobbler import which appears to be useful. Does this remove the need to use a cobbler distro add? whenever I run a cobbler report after a successful import of ubuntu desktop iso: sudo cobbler import --name=Ubuntu --path=/mnt --breed=debian task started: 2012-12-13_163245_import task started (id=Media import, time=Thu Dec 13 16:32:45 2012) Found a debian/ubuntu compatible signature: pool adding distros avoiding symlink loop avoiding symlink loop avoiding symlink loop associating repos associating kickstarts *** TASK COMPLETE *** I just get the following (nothing): distros: ========== profiles: ========== systems: ========== repos: ========== images: ========== mgmtclasses: ========== packages: ========== files: ========== I was rather hoping that I wouldn't have to do the traditional copying of all files in /mnt to a new /distro directory and then perform a cobbler distro add --initrd=/path/to/inird --kernel=/path/to/kernel Maybe I am mistaken about what the import actually does for me. If someone could elaborate on what the import is actually for please do.

  Read the article

• Cat 6 Only 100mbit speed

  - by Stu2000

  I tried two different cat6 cables directly connected between my two ubuntu machines. This one I ordered online: http://www.amazon.co.uk/gp/product/B002SQPDXS/ref=wms_ohs_product only achieves 100mbit speeds, but does appear to be supporting cross-talk (direct pc to pc), the other cat 6 cable, worked perfectly and gets the full 1gigabit speed. Both tests were performed using ftp and checking the network monitor with direct pc to pc connection. Did the product from amazon lie to me or do I need to manually set a setting somewhere in ubuntu for some cables? I had thought 10 quid for 20m of gigabit ethernet cable was a bit cheap, you get what you pay for... Regards, Stu Update: It seems that after rebooting, the device is set to 1000mbit sec when looking it up with sudo ethtool eth0 However after a while, this will drop down to just 100, after which to reset it to 1000 again, I have to reboot, and simply unpugging and re-plugging in the cable doesn't do it. I tried setting this in networking config file as suggested here: auto eth0 iface eth0 inet static pre-up /usr/sbin/ethtool -s eth0 speed 1000 duplex full but that resulted in my networking failing to start. Is there a problem with my 'auto-negotiation' or something? Can I manually override a setting to 1000mbit?

  Read the article

• Wheres my memory going?

  - by Stu2000

  My machine keeps 'freezing' before eventaully logging out with all the programs exiting. This is rather annoying, and I think its because I keep running out of memory. I am not running any custom software, just netbeans, chrome etc. (Stuff I usually run on other ubuntu computers without issue). For some reason my memory usage is through the roof as seen here, but I can't quite figure out why. Here is a screenshot which may be useful with htop and gnome-system monitor open as user and as root. I notice that my console-kit-daemon is taking up about a gig of 'virtual memory'. Is that normal? Any tips/advice will be helpful. In the meantime I have ordered 2 x 4 gig ram sticks to try and just throw hardware at the issue.

  Read the article

• Pxe boot ubuntu server - corrupt packages

  - by Stu2000

  I have set up a cobbler pxe boot server and managed to get centos5.8 to fully automatically install. Unfortunately with Ubuntu 12.04-server-i386, it stops mid-way through with a message stating that packages are corrupt. I tried following this tip to unzip the Packages.gz file which results in an empty Packages file with nothing in it. Other people suggested doing a touch command which essentially does the exact same thing, an empty Packages file. That results in me getting a different message that states: Couldn't retrieve dists/precise/restricted/binary-i386/Packages. This may be due to a network..... Does anyone know how to work around this issue? Hitting continue before having made the tip/workaround resulted in ubuntu installing fine, but I need to be able to provide no manual input. Any advice appreciated, Stu

  Read the article

• Pxe net install Centos with Static IP

  - by Stu2000

  I seem to be unable to perform a kickstart installation of centos5.8 with a netinstall. It correctly gets into the text installer, but keeps sending out a request for the dhcp server and failing. I have tried to manually set the IP everywhere. Here is my pxelinux.cfg file DEFAULT menu PROMPT 0 MENU TITLE Ubuntu MAAS TIMEOUT 200 TOTALTIMEOUT 6000 ONTIMEOUT local LABEL centos5.8-net kernel /images/centos5.8-net/vmlinuz MENU LABEL centos5.8-net append initrd=/images/centos5.8-net/initrd.img ip=192.168.1.163 netmask=255.255.255.0 hostname=client101 gateway=192.168.1.1 ksdevice=eth0 dns=8.8.8.8 ks=http://192.168.1.125/cblr/svc/op/ks/profile/centos5.8-net MENU end and here is my kickstart file: # Kickstart file for a very basic Centos 5.8 system # Assigns the server ip: 192.211.48.163 # DNS 8.8.8.8, 8.8.4.4 # London TZ install url --url http://mirror.centos.org/centos-5/5.8/os/i386 lang en_US.UTF-8 keyboard us network --device=eth0 --bootproto=static --ip=192.168.1.163 --netmask=255.255.255.0 --gateway=192.168.1.1 --nameserver=8.8.8.8,8.8.4.4 --hostname=client1-server --onboot=on rootpw --iscrypted $1$Snrd2bB6$CuD/07AX2r/lHgVTPZyAz/ firewall --enabled --port=22:tcp authconfig --enableshadow --enablemd5 selinux --enforcing timezone --utc Europe/London bootloader --location=mbr --driveorder=xvda --append="console=xvc0" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work part /boot --fstype ext3 --size=100 --ondisk=xvda part pv.2 --size=0 --grow --ondisk=xvda volgroup VolGroup00 --pesize=32768 pv.2 logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=528 --grow --maxsize=1056 logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow %packages @base @core @dialup @editors @text-internet keyutils iscsi-initiator-utils trousers bridge-utils fipscheck device-mapper-multipath sgpio emacs Here is my dhcp file: ddns-update-style interim; allow booting; allow bootp; ignore client-updates; set vendorclass = option vendor-class-identifier; subnet 192.168.1.0 netmask 255.255.255.0 { host tower { hardware ethernet 50:E5:49:18:D5:C6; fixed-address 192.168.1.163; option routers 192.168.1.1; option domain-name-servers 8.8.8.8,8.8.4.4; option subnet-mask 255.255.255.0; filename "/pxelinux.0"; default-lease-time 21600; max-lease-time 43200; next-server 192.168.1.125; } } Is it impossible to prevent it asking for a dynamic ip before trying to install from the net? Perhaps there is an error in of my files? My dhcp server is set to ignore client-updates, and is set to only works with one mac address whilst testing.

  Read the article

1