Search Results

Search found 470 results on 19 pages for 'temperature'.

Page 1/19 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • core temperature vs CPU temperature

    - by Karl Nicoll
    I have recently installed a new heat sink & fan combination on my Core 2 Quad since my CPU was hitting about 70C under load. This has managed reduce temperatures while running Prime95 to about 54C, which I'm taking as a win (this is ~30 minutes after fitting). I'm a little confused though. The temperature readings given above are for CORE temperatures, but HWMonitor is showing a 5th "CPU" temperature (4 temperatures being the individual core temps) which is showing 21C idle, when idle temperatures for the cores vary between 37C and 42C. I guess there are two questions here: Are my CPU/Core temperatures decent, and is it safe to overclock when these are stock clock temperatures? I gather that the maximum safe operating temperature for a C2Q is ~70C, so which temperature should I measure against, the core temperatures (which are higher), or the CPU temperature reading?

    Read the article

  • CPU temperature higher under Ubuntu 12.10 than under Windows 7

    - by user110019
    The CPU temperature under Ubuntu 12.10 is significantly higher than under Windows 7 doing similar tasks. For example, the CPU temperature under Windows when watching flash videos is around 50-60 degrees, under Ubuntu it is between 65-75. In idle mode in Ubuntu it is usually around 50. I use an i3 core and an integrated graphics. Is there a way to lower the temperature? And I don't mean via Jupiter as this doesn't work for watching videos..

    Read the article

  • How can I lower the CPU temperature?

    - by nmc
    I have installed Ubuntu 12.04 on my EeePC 1015PX and I've noticed that the CPU temperature does not go below 60ºC (70 is usual). Looking at powertop it seems the 2 cores (Atom N570) are idle most of the time. I've installed jupiter (w/ jupiter-eee-support) but it did not help. Edit: Meanwhile I've found out that echo 2 > /sys/devices/platform/eeepc-wmi/cpufv is supposed to turn on Super Hybrid Engine. Though it seems to help a bit (temperature goes down 2-3ºC), the temperatures are still in the 60-70ºc range.

    Read the article

  • HP Pavilion G6 1209 temperature higher than usual and fan working in 11.10

    - by vanjadjurdjevic
    Installing Ubuntu on this new machine i had various problems, so I asked around ask ubuntu for a solution. This is the latest one! :D When I start the pc it shows the temperature around 50-55. When I open chromium it shows 60+ (61,62,63). It even gets to 67-68 when multi-tasking 2 apps. The fan is working slightly louder than in windows 7. Talking about windows 7, the temperature is 45-50 when idle, 50-53 when working in browser. Im already loosing it with this machine. You can find specs here It says 'technishe daten' below the picture. Click that tab and you will reach the specs.

    Read the article

  • cpu temperature imrpoves very fast

    - by myildirim
    Last few days i found out that when i click google chrome and the open it my laptop starts being angry.That's fans are working hardly and i can not touch the mousepad because of heating.I use Ubuntu 11.10 on my Toshiba A350-22z laptop and monitor cpu and harddrive temperature.Both cores reached 104 Celcius and i read somewhere "if your processor reaches 105Celcius it harms itself".I cleaned inside of laptop a year ago but there is a point : until wheather becomes about 20Celcius there was no problem.I know hardware cleaning is the best solution but how can i solve with another way ? I think problem is about outside's hot wheather.Is there anybody that has the same problem.In addition to Google Chrome i realized that when i open online video the processor temperature increas very fast.

    Read the article

  • High temperature on my laptop with Radeon Mobility HD4670

    - by Lorthirk
    As almost everyone here, I guess, in these days I downloaded Quantal Quetzal to give it a try. However I noticed that my laptop runs fairly hot with cooling fans almost always on, even sitting in the desktop doing nothing. I downloaded XSensor to read temperature sensors, and I saw that while CPU stays on about 65°C, so quiet normal I guess, the GPU sits at 75°C. In comparison my actual Windows 7 installation, which dual boots witb Quantal, stays at 59°C CPU and 65°C. So I went reading and learned that AMD dropped support for my video card from fglrx package, and that fglrx-legacy won't support 1.13 Xorg, so I'm basically stuck with OSS drivers. So I was guessing if there's anything I can try, and if it's possible that the OSS drivers could be the cause of the high temperature?

    Read the article

  • Ubuntu 12.04 and KDE, graphical temperature monitor for GPU

    - by Frank
    I have ubuntu 12.04 and KDE. I already installed "lm-sensors", "hardware sensors indicator" and "Psensors" but none works well for me. I also know a couple of commands to find gpu temperature on terminal but I don't need that, I need a graphical application that works with kde to use. Do you know something that helps me? My card is MSI R6870 Hawk (from ATI original HD6870) and I have fglrx drivers Thanks

    Read the article

  • SSD temperature sensor readout with hddtemp

    - by Dande Un
    It seems hddtemp cannot detect the temperature sensor of my SSD (Samsung EVO 840) properly.This is the bash output when running hddtemp: WARNUNG: Laufwerk /dev/sda scheint keinen Temperatur-Sensor zu haben. WARNUNG: Das bedeutet nicht, dass es keinen besitzt. WARNUNG: Falls Sie sicher sind, dass es einen besitzt, kontaktieren Sie mich bitte ([email protected]). WARNUNG: Siehe Optionen --help, --debug und --drivebase. /dev/sda: Samsung SSD 840 EVO 120G B ?@: kein Sensor I looked in the most recent .db file posted on http://nongnu.mirrors.hostinginnederland.nl//hddtemp/hddtemp.db, but it doesn't seem to list any SSD drives at all. Was anyone able to readout the temp-sensor of a SSD with hddtemp?

    Read the article

  • CPU temperature is high on Ubuntu

    - by Kaspar
    So I have a machine which has both latest *Ubuntu and Windows 8 on it. On windows 8 my CPU temp is roughtly 26 degrees when idle. Now when I boot into Ubuntu, CPU temperature is suddenly 43 degrees when idle, plus my fans are making a lot of noise which is probably because of the CPU degrees. Why is that? Everywhere I read it says the Linux is much better at managing CPU and so on. But yet it seems something is wrong. It is a stock installation of Ubuntu 14.04 and my CPU is a Intel i5-4570

    Read the article

  • Ubuntu 12.10 Laptop temperature

    - by romi
    I'm using a laptop having dedicated graphics card with Ubuntu and Windows 7 dual boot. The windows 7 idle temperature for cpu is 51C average and gpu is 46-48.5C, and when in load Cpu temp varies between 55-61C, and GPU 49-51 MAX. But in ubuntu idle temp CPU: 54c Gpu(ati radeon,proprietary driver installed): 50C and on load cpu: 58-69C gpu:53C max. Is it normal? If not is there any solution? Note that i'm using jupiter,latest graphics driver, grub tweaks etc.

    Read the article

  • BIOS upgrade lowers CPU temperature

    - by N.N.
    Setup I've got a system with an Asus P8Z68-V PRO motherboard and an Intel Core i7-2600K CPU running at stock speed (no overlocking) which I cool with a Noctua NH-U12P. On the heatsink I've got the two included fans connected via the included Low-Noise Adapters (L.N.A.) 1100 RPM, 16.9 dB(A). In the BIOS settings I've set the CPU and chassis fan profile to silent. Issue Yesterday I upgraded from BIOS version 0501 to 0606. After the upgrade I checked the temperatures in the BIOS monitor and was surprised to see that the CPU temperature was slightly ~30°C. Before the upgrade the CPU temperature was ~50°C with the same BIOS settings (see the following heading for details on temperatures). How can this be? It seems a bit odd that a BIOS upgrade can lower the CPU temperature by 20°C and it also seems odd that the CPU temperature is lower than the chassis temperature. Temperatures When I've checked temperatures the room temperature has been ~23°C. I haven't changed the placement of the computer nor the hardware or cooling setup between BIOS versions. BIOS version 0501 BIOS monitor: CPU: ~50°C Chassis: ~33°C I haven't got any temperature measures from lm-sensors or the like for version 0501 because I only discovered the issue after upgrading to version 0606 and the BIOS updater utility won't let me downgrade to version 0501 (it says "outdated image" when I try to load version 0501). BIOS version 0606 BIOS monitor: CPU: ~30°C Chassis: ~33°C lm-sensors in Ubuntu 11.04 Desktop 64-bit (sudo sensors after an uptime of 4 h 52 min and a load average of 0.22, 0.18, 0.15): coretemp-isa-0000 Adapter: ISA adapter Core 0: +32.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +35.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +29.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +36.0°C (high = +80.0°C, crit = +98.0°C) The BIOS monitor temperatures was checked directly after the lm-sensors temperatures was checked. BIOS version 0706, 0801, 1101 and 3203 I get the same kind of temperatures both in the BIOS monitor and with lm-sensors in BIOS version 0706, 0801, 1101 and 3203 as in 0606. Information from Asus The 0606 changelog mentions nothing explicitly about CPU temperature (but item 3., as indicated by sidran32, might affect temperatures): P8Z68-V PRO 0606 BIOS with IRST 10.6.0.1002 Enable the support of Intel Rapid Storage Technology version 10.6.0.1002 Release Improve DRAM compatibility Improve System stability Improve compatibility with some Raid card model Increase IGD share memory size to 512MB However the following FAQ might give a hint: FAQs I find that the CPU temperature reading in BIOS is about 10~20 degrees centigrade hotter than the reading in OS. Is it normal? Page Tools Solution That is normal as BIOS does not send idle command to the CPU, making most of the power saving features useless. You should be getting similar reading if you disable EIST/C1E/CPU C3 Report/CPU C6 Report in BIOS.

    Read the article

  • How to check CPU temperature on a HP P2000?

    - by Pavel
    I have a HP StorageWorks MSA Storage P2000 G3 SAS. show sensor-status gives something like # show sensor-status Sensor Name Value Status ---------------------------------------------------- On-Board Temperature 1-Ctlr A 53 C OK On-Board Temperature 1-Ctlr B 52 C OK On-Board Temperature 2-Ctlr A 61 C OK On-Board Temperature 2-Ctlr B 63 C OK On-Board Temperature 3-Ctlr A 53 C OK On-Board Temperature 3-Ctlr B 53 C OK Disk Controller Temp-Ctlr A 34 C OK Disk Controller Temp-Ctlr B 32 C OK Memory Controller Temp-Ctlr A 66 C OK Memory Controller Temp-Ctlr B 67 C OK [...] Overall Unit Status OK OK Temperature Loc: upper-IOM A 40 C OK Temperature Loc: lower-IOM B 38 C OK Temperature Loc: left-PSU 36 C OK Temperature Loc: right-PSU 40 C OK [...] is one of the values the CPU/FPGA temperature? Or, if not, how do I get it? Thanks!

    Read the article

  • Monitoring server room temperature

    - by user640
    I have a small server room with its own AC unit. Recently, the AC died, and the temperature increased from 70 F to 90 F. We rarely go in this room, so I was lucky that someone happened to notice that the fans were running a lot louder than normal as they walked past the door. It looks like I need a way to be notified when the temperature in that room gets too hot. What tools are you using to monitor the temperature in your server room? How does this tool notify you of a problem (email, SNMP, etc). Note: I've read this question on server temperature, but I'm interested in the whole room, not just the inside of a server case. Edit: Thanks for all the great responses so far! Many of these products measure much more than just temperature. What else should I be looking at and why?

    Read the article

  • Downclock CPU reaching critical temperature

    - by Draga
    I have an HP tx1250 laptop. It always had serious overheating problems and although usually it runs fine I'm now running a continuous test for my dissertation, this brings the CPU temp close to the critical and from time to time the computer shutdown for reaching it (checked the log). I use to have the same problem on Win XP but I noticed Win Vista and 7 downclock the CPU when is necessary to cool it down so I was thinking if the same is possible on Ubuntu 12. The only program I've found that may do the job is computer temp ( http://computertemp.berlios.de/ ) but it doesn't seems to work under Ubuntu 12. The inside of the laptop is fairly clean, the thermal paste is quite recent, I'm keeping it lifted from the desk and judjung by the sound of the fan that's running fine as well. The pc in now running between 78 and 91 degrees C but about once a day it shut down for reaching 95. I need the results of the test it's running pretty soon so it's important that it runs non-stop. I've though to set the maximum clock of the CPU to slightly less the maximum but then these tests I'm running would take much more time. Thanks! PS: first and last HP laptop for me.

    Read the article

  • average temperature of CPU

    - by lego 69
    I downloaded the program named speedFan(for measuring the temperature of the hardware), and I have parameters like these GPU: 60C HDO: 38C Temp1: 50C Core 0: 44C Core 1: 44C Core: 59C Ambient: 0C I know that it shows me temperature of the different parts of my hardware, but I have no idea which ones, can You please explain it and also, is it something wrong with my laptop (because temperature of GPU is 60C) thanks in advance

    Read the article

  • How to monitor the temperature of a HP Procurve 3500 switch via SNMP

    - by Murali Suriar
    I am attempting to poll the temperature of an HP ProCurve 3500YL switch remotely using SNMP. Looking at this MIB, it appears that the following OIDs: hpCpuTemperature 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.6 hpPowerSupplyTemperature 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.7 hpChassisTemperature 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.8 Within the 'hpProcurveSysMib' should provide the data I need. However, whenever I attempt to access these OIDs, I receive the response: SNMPv2-SMI::enterprises.11.2.3.7.11.17.7.1.1.1.6 = No Such Object available on this agent at this OID Further investigation reveals that the switch in question does not appear to implement the parent hpProcurveSystem MIB: SNMPv2-SMI::enterprises.11.2.3.7.11.17.7.1.1 = No Such Object available on this agent at this OID Does anyone know of an alternative MIB implemented by the 3500 that will allow its temperature to be polled automatically?

    Read the article

  • Thinkpad CPU temperature reaches 100°C after 10 minutes of heavy use

    - by Nicolas Raoul
    Less than two years ago, I bought a Lenovo Thinkpad R500. When using the CPU heavily, it sometimes decides to reboot. I am using Linux, and a widget shows me the CPU temperature. The PC usually reboots when the temperature of the first core gets over 100°C Since I switched from Ubuntu 2010.10 32bit to Ubuntu 2011.04 64bit, it crashes much more often. I survive using these techniques: When in the office, I use a laptopcooler. When outside, I underclock to 800 MHz, by doing so it does not get too warm. QUESTION: Is it normal that a Thinkpad crashes if the CPU is at 100% for more than 10 minutes? How can I use the full power of my computer, for instance when showing CPU-hungry business intelligence tools to clients? The computer does not really feel that hot. Maybe the sensor itself is reporting wrong temperatures? Can I tell the BIOS to ignore it?

    Read the article

  • Bad temperature sensors on Foxconn motherboard?

    - by Gawain
    I have a system with a Foxconn V400 series motherboard and AMD Athlon 3000+ processor. Ever since I got it a few years ago the fans (particularly the CPU fan) have been really loud. So recently I installed SpeedFan to see why they were running so fast. SpeedFan reported the CPU temperature to be 32C, and one motherboard sensor at about 26C. But the other two motherboard sensors were reporting 78C and 64C respectively. Naturally the fans were both maxed out because of this, with the CPU fan at 5800rpm and the case fan at 2400rpm. I opened the case and everything inside was literally cool to the touch, with the exception of the CPU heatsink which was slightly warm, but nowhere near 78C. It seems like the temperature sensors are either defective or being read incorrectly. Is there some way I can decrease my fan noise without risking damage to my processor? Some way to ignore those two temp sensors? Any help would be greatly appreciated.

    Read the article

  • Automatically detecting temperature sensors on startup (Ubuntu 10.10)

    - by dpitch40
    I am very close to achieving my goal of setting up a CPU temperature graph that is displayed in the top panel of my desktop. I have the applet and have gotten it to graph temperatures, which appear to be being sensed correctly. However, my machine doesn't find its temperature sensors by default; I have to run sudo modprobe coretemp for the sensors command to work, then log off and back in before the graph applet starts displaying my temperatures. I am wondering if I can somehow tell the kernel to load the coretemp module on startup so I don't have to keep doing these extra steps. I have tried putting this command in my startup applications, but I think its need for root permission is keeping this from working. Is there a way to set up startup applications with root permission, or some other way to ensure that this module is loaded at startup? If anyone is curious, I'm running 64-bit Ubuntu 10.10 on a Lenovo G770 laptop with a Core i5 processor and the 2.6.35 kernel.

    Read the article

  • Linux AMD-FX 8350 temperature monitoring

    - by HyperDevil
    I’m trying to get the CPU temperature for my AMD-FX8350 on Debian Squeeze. I ran sensors-detect and then sensors, but I only get my motherboard sensors (it8720-isa-0228). There are three temperature values there but I assume those are not for the CPU. it8720-isa-0228 Adapter: ISA adapter in0: +1.36 V (min = +0.00 V, max = +4.08 V) in1: +1.50 V (min = +0.00 V, max = +4.08 V) in2: +3.38 V (min = +0.00 V, max = +4.08 V) in3: +2.93 V (min = +0.00 V, max = +4.08 V) in4: +3.07 V (min = +0.00 V, max = +4.08 V) in5: +4.08 V (min = +0.00 V, max = +4.08 V) in6: +4.08 V (min = +0.00 V, max = +4.08 V) in7: +2.93 V (min = +0.00 V, max = +4.08 V) Vbat: +3.01 V fan1: 3375 RPM (min = 10 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 1730 RPM (min = 10 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: +53.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode temp3: +65.0°C (low = +127.0°C, high = +90.0°C) sensor = thermal diode cpu0_vid: +0.000 V Is there anything I am missing? I also loaded the K8temp and K10temp modules and ran sensor-detect without any results. I do see this message in dmesg: hwmon-vid: Unknown VRM version of your x86 CPU

    Read the article

  • Looking for CPU/GPU Temperature Monitor with Live Logging

    - by Nick Gotch
    I'm looking for a CPU/GPU temperature monitor with live logging that's also free. This question recommended some good software but doesn't meet my needs. I tried HWMonitor and it works great except it doesn't have live logging. I need live logging because the system I'm using seems to overheat and shutdown (assuming it's related to overheating) and I'd like to catch the failing point.

    Read the article

  • My system show extremely hot processor temperature

    - by user34300
    I've build a small miniITX system with Pentium 4 processor. It works fine but there's extremely hot temperature is shown by the CPU sensor, around 120 C. Of course this is causing the fan run extremely fast as well making the whole system very loud. I tried to touch the CPU radiator but it is very cool so this should be some kind of error. Could you please give me an advice on how to troubleshoot this?

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >