Search Results

Search found 51 results on 3 pages for 'tmg'.

Page 1/3 | 1 2 3  | Next Page >

• 'The RPC server is unavailable' when converting a physical ISA/Forefront TMG machine to virtual (P2V) in SCVMM

  - by Goran B.

  When I try to convert a physical ISA/TMG machine to virtual using SCVMM, i keep getting an error in the Collect machine configuration step ('Scan Now' button): VMM is unable to complete the request. The connection to the agent MACHINE_NAME was lost. Ensure that the computer MACHINE_NAME exists on the network, WMI service and the agent are installed and running and that a firewall is not blocking HTTP and WMI traffic. ID: 3157 Details: The RPC server is unavailable (0x800706BA) Firewall rules allow for RPC traffic from the SCVMM machine to ISA/TMG machine.

  Read the article

• Are there other application layer firewalls like Microfot TMG (ISA) that do advanced http rules?

  - by Bret Fisher

  Since the old days ISA and now TMG have had several great features that I often want to deploy to my customers because of the enhanced functionality and security, but often the cost of an additinal server HW, Windows Server, and TMG license is too much to justify when compaired to a $300-500 appliance. Are there other gateway firewalls that can perform one or more of these application layer features: pre-auth incoming http traffic against AD/LDAP before sending packets to internal server (forms auth or basic creds popup)? read host headers of incoming http traffic (even on https) to a single public IP and route packets to different internal servers based on that host header?

  Read the article

• curl blocked at TMG firewall

  - by jemtube100

  i using TMG (threat management gateway) firewall at my web server. when i try to use Curl from outside, this firewall was blocked the connection. what rule/setting that i need to create at TMG to allow it. the error state as below : Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion. Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped. Access from a link: If there is a link to the page you are looking for, try accessing the page from that link. </UL> <HR color=#c0c0c0 noShade> <P id=L_defaultr_11>Technical Information (for support personnel)</P> <UL> <LI id=L_defaultr_12>Error Code: 403 Forbidden. The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. (12202)

  Read the article

• Forefront TMG vs pfSense

  - by Macropus

  We currently run pfSense with no problems, however we are looking at TMG as it is included in our partner subscription to MS and allows Windows 7 DirectConnect features to our domain for off-site users. I have had a google, but there don't seem to be any comparisons of TMG to pfSense. Anyone have experience/knowledge of this? Our infrastructure is Windows Server 2008 R2 behind pfSense at the moment.

  Read the article

• Forefront TMG vs pfSense

  - by JD01

  Hi all, We currently run pfSense with no problems, however we are looking at TMG as it is included in our partner subscription to MS and allows Windows 7 DirectConnect features to our domain for off-site users. I have had a google, but there don't seem to be any comparisons of TMG to pfSense. Anyone have experience/knowledge of this? Our infrastructure is Windows Server 2008 R2 behind pfSense at the moment.

  Read the article

• VPN access configuration with ForeFront TMG

  - by Yang

  I am trying to configure VPN Client access with ForeFront TMG. When I try to add domain groups to allow access to them, under Group column I can only see the SID of the domain group. And the Domain column ends up empty. ForeFront TMG is joined to the domain. Can you think of a reason?

  Read the article

• Best practice for Exchange 2010 HA topology considering 6 x Exchange licenses and TMG 2010

  - by MadBoy

  What would be best topology considering that: 6 x Exchange 2010 Standard Licenses 2 x Separate locations that are supposed to support redundancy in case of link problems 4 x Forefront TMG 2010 with Forefront Security and Forefront Protection/Security Multiple locations worldwide using those Exchange. Most locations will be connected with VPN Tunnel (the ones hosting Exchange for sure). I was thinking something like this: Location MAIN (about 70-100 people): 2x TMG 2010 in NLB 1x Exchange 2010 CAS/HUB Role 2x Exchange 2010 Mailbox Role (Active + Passive) Location SUPPORT (about 20 people): 2x TMG 2010 in NLB 1x Exchange 2010 CAS/HUB Role 2x Exchange 2010 Mailbox Role (Active + Passive) Management wants to make sure that in case of problems in main location (power failure, link loss etc) second location can support all traffic from around the world and vice-versa. We have 6-7 locations and more comming up (not big ones but like 10+ people per each location). I do know that CAS/HUB is single point of failure (and no NLB), but i simply lack more licenses to do some redundancy on that. What do you think about this approach? What would be better approach according to you?

  Read the article

• Multiple VLANs in the same subnet

  - by A.J.

  Is it possible to have multiple VLANs in the same subnet, with the same gateway address (TMG)? I want to avoid having many Subnets (and vNIC's in TMG) just to isolate sets of a few hosts. IP: 10.0.0.1 (TMG server) VLAN:1 ~ 3 IP: 10.0.0.11 ~ 20 (Hosts group 1) VLAN:1 IP: 10.0.0.21 ~ 30 (Hosts group 2) VLAN:2 IP: 10.0.0.31 ~ 40 (Hosts group 3) VLAN:3 Note that I don't want them to connect to each other, so ARP/inter-vlan routing (within the subnet) is not required. The gateway is running in a VM within ESXi 5, I can pass the VLans to the VM using VGT or VLan Range, but I don't know how the OS/TMG should handle them.

  Read the article

• Access FTPS from behind Forefront TMG

  - by Maxim V. Pavlov

  I have a web server on which IIS 7 host an SSL-enabled site. The client in am trying to connect with is behind the corporate Forefront TMG. The app is Total Commander - a file manager shell, that has the ability to connect to SSL FTP by putting a checkmark over SSL/TLS in the FTP connection settings. When FTP Access Filter in FF is enabled, my connection attempt fails on Negociating TLS step of FTP connection. The same happens even if I enable Allow Active FTP in the filter's settings. But when I disable the FTP Access Filter on FF completely, I am able to connect fine. How to configure FF TMG to allow FTPS?

  Read the article

• TMG Forefront Proxy blocking internal HTTP requests

  - by Pascal

  I have TMG Forefront with Proxy installed and configured. However, whenever I make internal HTTP requested to servers on the internal network with a fully qualified dns name, the proxy denies the connection. Denied Connection FRW-02 18/03/2011 20:06:37 Log type: Web Proxy (Forward) Status: 12202 Forefront TMG denied the specified Uniform Resource Locator (URL). Rule: Default rule Source: Internal (10.50.75.21:21492) Destination: Internal (10.50.75.10:8080) Request: GET http://app-01.mydomain.com.br:9871/internalwebserver_deploy/MyServiceService.svc?wsdl Filter information: Req ID: 0a157279; Compression: client=No, server=No, compress rate=0% decompress rate=0% Protocol: http User: anonymous How can I get around this block? This is an internal call, so it should block it. If I use only http://app-01:9871/internalwebserver_deploy/MyServiceService.svc?wsdl, without the domain after the server name, then it doesn't get blocked. 10.50.75.10 is the firewall's ip, and the internal network's gateway.

  Read the article

• Migrating 2008 AD to Windows SBS 2011 and Forefront TMG 2010

  - by Tong Wang

  Our company has two physical servers: a Dell R710 with 4 NIC and a Dell R410 with 2 NIC. Right now, we have Windows server 2008 R2 installed on R710 with AD setup to host our domain. I am thinking to install both SBS 2011 and TMG 2010 on the other R410 running on Hyper-V. As I am fairly new to Windows Server technology, I'd like to check with you fellow Windows admins and see what is the proper way to install SBS 2011 and TMG 2010 and how to migrate the 2008 AD. Your advice and help will be highly appreciated.

  Read the article

• Does MS Forefront TMG cache authentication?

  - by SnOrfus

  I'm testing a client machine that makes requests to a biztalk server using a forefront machine as a web proxy. Upon first test I put in an invalid name/password into the receive port and received the correct error message (407). Then, I set the correct name/password and everything worked correctly. From there, I kept the correct information in the receive port but put an invalid name/password into the send adapter but the process completed successfully (should have failed with 407). I've ensured that both the recieve and send ports are not bypassing the proxy for local addresses. So the only thing that seems to make sense is if TMG is caching the authentication request coming from the machine I'm working on. Is this thinking correct, and if so, does anyone know how to disable it in TMG?

  Read the article

• Wrong source IP when accessing internet directly from TMG server

  - by jarod1701

  Hi everyone, after implementing a ForeFront TMG server I'm facing only one problem: After I added a second IP to the external adapter I had to manually set "NAT Address Selection" inside the network rule "Internet Access" to the first IP since all others would get blocked by the CISCO firewall. This configuration works as long as traffic comes from the internal network (e.g. browser on clients). Traffic from the TMG directed to the internet always carries the second IP as it's source address and gets blocked. All our other TMGs/ISAs are running fine and I never came across this problem- Does anybody have a clue, coz I don't?! Kevin

  Read the article

• How to bypass Forefront TMG for downloading from Adobe Cloud

  - by user1006272

  I hope that this question has not been asked as I've spent a couple of days googling around trying to find a solution. I have one computer that needs to download from Adobe Cloud to install applications like Photoshop etc... The issue I'm having is that Adobe uses a download manager program (AdobeApplicationManager.exe) that just keeps incrementing the time left on the download of any app like Photoshop. Is there a way to allow just the download manager from that one computer to bypass any filtering settings in Forefront TMG 2010? I have very little knowledge of servers / ISA servers / Forefront TMG and have been thrown into this position by luck I guess. Any help with this would be highly appreciated. Thanks in advance.

  Read the article

• Error 619 when connecting to ForeFront TMG VPN

  - by yang

  I have a fresh new Windows Server 2008 R2 Domain Setup and a ForeFront TMG installation. Both of them are newly installed. I enabled VPN client access and configured address assignment method. Now when I try to connect to VPN over internet (with Windows 7 client) I receive Error 619 stating that the credentials are wrong. Of course credentials are not wrong, something else is wrong here. Any help?

  Read the article

• Single hardware unit to protect web servers and implement smart publishing

  - by Maxim V. Pavlov

  Thus far we've been using the combination of Forefront TMG 2010 as an edge firewall + intrusion prevention system + web site publishing mechanism in the data center to work with a few web server machines. Since we develop on ASP.NET, we are IIS and in general - Microsoft crowd. Since TMG is being deprecated, we need to come up with a hardware alternative to protect and serve our data center web cloud. Could you please advise a hardware or virtual appliance solution that can provide routing, flood prevention and smart web-site publishing (one IP - many web sites based on domain name filter) all in one. Even if it is hard to configure, as long as it covers all these features, we will invest to learn and replace TMG eventually.

  Read the article

• Network outside internal not reaching TMG Forefront 2010 (Hyper-V environment)

  - by Pascal

  Below is my environment: I have 1 physical machine running Windows 2008 R2, with the Hyper-V role. This machine has 3 physical NICs: One for Internet One for Internal Network One for Wireless Network All 3 have their respective Virtual Networks in Hyper-V, and I have an extra Private virutal machine network for a DMZ Network. In one of the virtual machines, I have TMG Forefront 2010 SP1 installed, with all 4 networks available to it. Below is the IPCONFIG /ALL at the firewall: Windows IP Configuration Host Name . . . . . . . . . . . . : FRW-EXP1-02 Primary Dns Suffix . . . . . . . : exp1.eti.br Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : exp1.eti.br Ethernet adapter Internet: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #4 Physical Address. . . . . . . . . : 00-15-5D-01-06-0E DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::6d05:6033:4cfc:bdf5%15(Preferred) IPv4 Address. . . . . . . . . . . : 189.100.110.xxx(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.240.0 Lease Obtained. . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 11:17:24 Lease Expires . . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 16:07:02 Default Gateway . . . . . . . . . : 189.100.96.xxx DHCP Server . . . . . . . . . . . : 201.6.2.43 DHCPv6 IAID . . . . . . . . . . . : 436213085 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Rede Interna: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #3 Physical Address. . . . . . . . . : 00-15-5D-01-06-0C DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::51ff:4723:ce4c:bbc3%14(Preferred) IPv4 Address. . . . . . . . . . . : 10.50.75.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352327005 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 10.50.75.1 10.50.75.2 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter DMZ: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #2 Physical Address. . . . . . . . . : 00-15-5D-01-06-0A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::d4c5:75cf:e9aa:73e1%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.10.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 301995357 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Wireless: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-0B DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::459:8ca6:d02:8da1%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I have the Networks below at Forefront: External: IP addresses external to the Forefront TMG Networks Internal: 10.50.75.0 - 10.50.75.255 Local Host: Perimiter: 192.168.10.0 - 192.168.10.255 Wireless: 192.168.1.0 - 192.168.1.255 In the Networks Rules, I have: 1 => Route => Local Host => All Networks 2 => Route => Quarantined; VPN => Internal 3 => NAT => Internal; VPN => Perimiter 4 => NAT => Internal; Perimiter; Quarantined; VPN; Wireless => External My problem is that I can only communicate with the Internal and External networks. If a ping www.google.com or 10.50.75.21 from the Forefront VM, I get answer backs without a problem. If I try to ping a machine at the Perimiter network or the Wireless network, it doesn't get routed back to Forefront, and it's the default gateway on all Networks. Here as ping samples: PS C:\Users\Administrator.TPB1> ping www.google.com Pinging www.l.google.com [64.233.163.104] with 32 bytes of data: Reply from 64.233.163.104: bytes=32 time=11ms TTL=58 Reply from 64.233.163.104: bytes=32 time=8ms TTL=58 Ping statistics for 64.233.163.104: Packets: Sent = 2, Received = 2, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 8ms, Maximum = 11ms, Average = 9ms Control-C PS C:\Users\Administrator.TPB1> ping 10.50.75.21 Pinging 10.50.75.21 with 32 bytes of data: Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Ping statistics for 10.50.75.21: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms PS C:\Users\Administrator.TPB1> ping 192.168.10.3 Pinging 192.168.10.3 with 32 bytes of data: Reply from 192.168.10.1: Destination host unreachable. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.10.3: Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), PS C:\Users\Administrator.TPB1> The ping to the 192.168.10.3 gets the Destination host unreachable. Below is the ipconfig for the perimiter VM: PS C:\Users\Administrator.Administrator> ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : app-exp1-02 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unkown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-08 DHCP Enabled. . . . . . . . . . . : No IPv4 Address. . . . . . . . . . . : 192.168.10.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.10.1 DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 Trying to ping 192.168.10.1 ( the gateway ) from the DMZ machine also does not work. When I use Log & Reports to monitor packets from Wireless network and Perimiter network, I don't get any packets link PING or HTTP that I try to send. But I do get a lot of spoofing messages for NETBIOS broadcasts... it's like Forefront thinks it's coming from a different network, but I don't know why. Please Help! Tks

  Read the article

• Forefront TMG 2010: Can you monitor realtime TCP connections and bandwidth on a per-user basis?

  - by user65235

  I'm just starting a trial of ForeFront TMG to use as a proxy server. I know I can get a real time activity monitor and filter on a per user basis, but would like to be able to get a real time activity monitor of all users that I can then sort by bandwidth consumed (enabling me to get a view on who the bandwidth hogs are). Does anyone know if this is possible in Forefront TMG or if a third party product is required? Thanks. JR

  Read the article

• Forefront TMG: Can you monitor realtime TCP connections and bandwidth on a per-user basis?

  - by user65235

  I'm just starting a trial of ForeFront TMG to use as a proxy server. I know I can get a real time activity monitor and filter on a per user basis, but would like to be able to get a real time activity monitor of all users that I can then sort by bandwidth consumed (enabling me to get a view on who the bandwidth hogs are). Does anyone know if this is possible in Forefront TMG or if a third party product is required? Thanks. JR

  Read the article

• Redundancy and Automated failover using Forefront TMG 2010 Standard between Production-DR site ?

  - by Albert Widjaja

  Hi, I'm using MS TMG 2010 Standard as my single firewall to publish my Exchange Server and IIS website to the internet, however it is just one VM in the DMZ network with just one network card (vNIC), what sort of redundancy method that is suitable for making this firewall VM redundant / automatically failover in my DR site ? Because it is very important in the event of disaster recovery all important email through various mobile device will still need to operate and it is impossible if this TMG 2010 VM is offline. is it by using: 1. Multicast NLB 2. Any other clustering 3. VMware HA / FT (one VM in production, the other VM in DR site with different subnet ?) Any suggestion and idea willl be appreciated. Thanks

  Read the article

• Always failed in connecting to the Outlook Anywhere through TMG 2010 with certificate ?

  - by Albert Widjaja

  Hi, I have successfully published Exchange Activesync using TMG 2010 and OWA internally only but somehow when I tried to publish the Outlook Anywhere it failed ( as can be seen from the https://www.testexchangeconnectivity.com ) Settings: IIS 7 settings, I have unchecked the require SSL and "Ignore" the client certificate Exchange CAS settings: ServerName : ExCAS02-VM SSLOffloading : True ExternalHostname : activesync.domain.com ClientAuthenticationMethod : Basic IISAuthenticationMethods : {Basic} MetabasePath : IIS://ExCAS02-VM.domainad.com/W3SVC/1/ROOT/Rpc Path : C:\Windows\System32\RpcProxy Server : ExCAS02-VM AdminDisplayName : ExchangeVersion : 0.1 (8.0.535.0) Name : Rpc (Default Web Site) DistinguishedName : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=ExCAS02-VM,CN=Servers,CN=Exchange Administrative....... Identity : ExCAS02-VM\Rpc (Default Web Site) Guid : 59873fe5-3e09-456e-9540-f67abc893f5e ObjectCategory : domainad.com/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory} WhenChanged : 18/02/2011 4:31:54 PM WhenCreated : 18/02/2011 4:30:27 PM OriginatingServer : ADDC01.domainad.com IsValid : True Test-OutlookWebServices settings: 1013 Error When contacting https://activesync.domain.com/Rpc received the error The remote server returned an error: (500) Internal Server Error. 1017 Error [EXPR]-Error when contacting the RPC/HTTP service at https://activesync.domain.com/Rpc. The elapsed time was 0 milliseconds. https://www.testexchangeconnectivity.com testing result: Checking the IIS configuration for client certificate authentication. Client certificate authentication was detected. Additional Details Accept/Require client certificates were found. Set the IIS configuration to Ignore Client Certificates if you aren't using this type of authentication. environment: Windows Server 2008 (HT-CAS) Exchange Server 2007 SP1 TMG 2010 Standard Outlook 2007 client SP2. Any kind of help would be greatly appreciated. Thanks.

  Read the article

• Is it possible to configure TMG to impersonate a domain user for anonymous requests to a website?

  - by Daniel Root

  I would like to configure Forefront Threat Management Gateway (formerly ISA server) to impersonate a specific domain user for any anonymous request to a particular listener. For example, for any anonymous request to http://www.mycompany.com, I would like to serve up http://myinternal as though MYDOMAIN/GuestAccount were accessing the site. Is this even possible in ISA/TMG? If so, where do I go to configure this?

  Read the article

• Reverse DNS does not match SMTP banner vs Reverse DNS mismatch

  - by MadBoy

  I have to make decision whether my Reverse DNS should match SMTP banner but Reverse DNS to DNS and vice versa stays different or vice versa. Which one to choose? I have an 2x Exchange 2010 server with one SMTP Sender with TMG 2010. TMG has 2 links connected so that we have 2 separate internet providers. The problem is I have no way to control TMG behavior on which link is used to send emails as it picks it randomly. I have 2 MX records: - mail.test.com which resolves to IP and IP resolves to mail.test.com - mail2.test.com which resolves to IP2 and IP2 resolves to mail.test.com This was done to prevent smtp banner issues but it provides problems with Reverse DNS if the server on the other side is eager enough to do comparison. But I've checked with Google and they also don't have that in perfect condition.

  Read the article

• WPF Data Binding won't work

  - by Tokk

  Hey, I have got an UserControll with a DependencyProperty called "Risikobewertung" whitch has the own Datatype "RisikoBewertung"(Datatype created by LINQ). So in my Controll I try to bind the Fields of RisikoBewertung to the TextBoxes on the Controll, but It won't work. I hope you can help me, and tell me why ;) Code: UserControl.xaml: <UserControl x:Class="Cis.Modules.RiskManagement.Views.Controls.RisikoBewertungEditor" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:gridtools="clr-namespace:TmgUnity.Common.Presentation.Controls.DataGridTools;assembly=TmgUnity.Common.Presentation" xmlns:converter="clr-namespace:Cis.Modules.RiskManagement.Views.Converter" xmlns:tmg="clr-namespace:TmgUnity.Common.Presentation.Controls.FilterDataGrid;assembly=TmgUnity.Common.Presentation" xmlns:validators="clr-namespace:TmgUnity.Common.Presentation.ValidationRules;assembly=TmgUnity.Common.Presentation" xmlns:toolkit="http://schemas.microsoft.com/wpf/2008/toolkit" xmlns:risikoControls="clr-namespace:Cis.Modules.RiskManagement.Views.Controls"> <UserControl.Resources> <converter:CountToArrowConverter x:Key="CountConverter" /> </UserControl.Resources> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Name="Veränderung"/> <ColumnDefinition Name="Volumen" /> <ColumnDefinition Name="Schadenshöhe" /> <ColumnDefinition Name="SchadensOrte" /> <ColumnDefinition Name="Wahrscheinlichkeit" /> <ColumnDefinition Name="Kategorie" /> <ColumnDefinition Name="Handlungsbedarf" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="20" /> <RowDefinition /> </Grid.RowDefinitions> <Image Source="{Binding Path=Entwicklung, Converter={StaticResource CountConverter}, UpdateSourceTrigger=PropertyChanged}" Grid.RowSpan="2" Grid.Row="0" Width="68" Height="68" Grid.Column="0" /> <TextBox Grid.Column="1" Grid.Row="0" Text="Volumen" /> <TextBox Grid.Column="1" Grid.Row="1"> <TextBox.Text> <Binding Path="Volumen" UpdateSourceTrigger="PropertyChanged" /> </TextBox.Text> </TextBox> <TextBox Grid.Column="2" Grid.Row="0" Text="Schadenshöhe" /> <TextBox Grid.Column="2" Grid.Row="1" Text="{Binding Path=Schadenshöhe, UpdateSourceTrigger=PropertyChanged}" /> <StackPanel Grid.Column="3" Grid.RowSpan="2" Grid.Row="0" Orientation="Horizontal"> <Grid> <Grid.RowDefinitions> <RowDefinition Height="20" /> <RowDefinition /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition /> <ColumnDefinition /> <ColumnDefinition /> </Grid.ColumnDefinitions> <TextBox Text ="Politik" Grid.Row="0" Grid.Column="0"/> <CheckBox Name="Politik" Grid.Row="1" Grid.Column="0" IsChecked="{Binding Path=Politik, UpdateSourceTrigger=PropertyChanged}" VerticalAlignment="Center" HorizontalAlignment="Center" /> <TextBox Text ="Vermögen" Grid.Row="0" Grid.Column="1" /> <CheckBox Name="Vermögen" Grid.Row="1" Grid.Column="1" IsChecked="{Binding Path=Vermögen, UpdateSourceTrigger=PropertyChanged}" VerticalAlignment="Center" HorizontalAlignment="Center" /> <TextBox Text ="Vertrauen" Grid.Row="0" Grid.Column="2" /> <CheckBox Name="Vertrauen" Grid.Row="1" Grid.Column="2" IsChecked="{Binding Path=Vertrauen, UpdateSourceTrigger=PropertyChanged}" VerticalAlignment="Center" HorizontalAlignment="Center" /> </Grid> </StackPanel> <TextBox Grid.Column="4" Grid.Row="0" Text="Wahrscheinlichkeit" /> <TextBox Grid.Column="4" Grid.Row="1" Text="{Binding Path=Wahrscheinlichkeit, UpdateSourceTrigger=PropertyChanged}"/> <risikoControls:RiskTrafficLightControl Grid.Column="5" Grid.Row="0" Grid.RowSpan="2" RiskValue="{Binding Path=Kategorie, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}" /> <StackPanel Grid.Column="6" Grid.RowSpan="2" Grid.Row="0" Orientation="Vertical"> <TextBox Text="Handlungsbedarf" /> <CheckBox VerticalAlignment="Center" HorizontalAlignment="Center" IsChecked="{Binding Path=Handlungsbedarf, UpdateSourceTrigger=PropertyChanged}" /> </StackPanel> </Grid> The CodeBehind: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; using System.ComponentModel; using Cis.Modules.RiskManagement.Data; using Cis.Modules.RiskManagement.Views.Models; namespace Cis.Modules.RiskManagement.Views.Controls { /// <summary> /// Interaktionslogik für RisikoBewertungEditor.xaml /// </summary> public partial class RisikoBewertungEditor : UserControl, INotifyPropertyChanged { public event PropertyChangedEventHandler PropertyChanged; public static readonly DependencyProperty RisikoBewertungProperty = DependencyProperty.Register("RisikoBewertung", typeof(RisikoBewertung), typeof(RisikoBewertungEditor), new PropertyMetadata(null, new PropertyChangedCallback(RisikoBewertungChanged))); // public static readonly DependencyProperty Readonly = DependencyProperty.Register("EditorReadonly", typeof(Boolean), typeof(RisikoBewertungEditor), new PropertyMetadata(null, new PropertyChangedCallback(ReadonlyChanged))); private static void RisikoBewertungChanged(DependencyObject dependencyObject, DependencyPropertyChangedEventArgs arguments) { var bewertungEditor = dependencyObject as RisikoBewertungEditor; bewertungEditor.RisikoBewertung = arguments.NewValue as RisikoBewertung; } /* private static void ReadonlyChanged(DependencyObject dependencyObject, DependencyPropertyChangedEventArgs arguments) { } */ public RisikoBewertung RisikoBewertung { get { return GetValue(RisikoBewertungProperty) as RisikoBewertung; } set { SetValue(RisikoBewertungProperty, value); if (PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs("RisikoBewertung")); } } } /* public Boolean EditorReadonly { get; set; } */ public void mebosho(object sender, RoutedEventArgs e) { MessageBox.Show(RisikoBewertung.LfdNr.ToString()); } public RisikoBewertungEditor() { InitializeComponent(); RisikoBewertung = new RisikoBewertung(); this.DataContext = (GetValue(RisikoBewertungProperty) as RisikoBewertung); } } } and a little example of it's usage: <tmg:FilterDataGrid Grid.Row="0" AutoGenerateColumns="False" ItemsSource="{Binding TodoListe}" IsReadOnly="False" x:Name="TodoListeDataGrid" CanUserAddRows="False" SelectionUnit="FullRow" SelectedValuePath="." SelectedValue="{Binding CurrentTodoItem}" gridtools:DataGridStyle.SelectAllButtonTemplate="{DynamicResource CisSelectAllButtonTemplate}" CanUserResizeColumns="True" MinHeight="80" SelectionChanged="SelectionChanged" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" diagnostics:PresentationTraceSources.TraceLevel="High" > <tmg:FilterDataGrid.RowDetailsTemplate> <DataTemplate> <risikoControls:RisikoBewertungEditor x:Name="BewertungEditor" RisikoBewertung="{Binding ElementName=TodoListeDataGrid, Path=SelectedValue}" diagnostics:PresentationTraceSources.TraceLevel="High"> </risikoControls:RisikoBewertungEditor> </DataTemplate> </tmg:FilterDataGrid.RowDetailsTemplate> <tmg:FilterDataGrid.Columns> <toolkit:DataGridTextColumn Binding="{Binding Path=LfdNr}" Header="LfdNr" /> </tmg:FilterDataGrid.Columns> </tmg:FilterDataGrid>

  Read the article

• How to rewrite index.php (and other valid default files) to the document root using mod_rewrite?

  - by TMG

  Hello, I would like to redirect index.php, as well as any other valid default file (e.g. index.html, index.asp, etc.) to the document root (which contains index.php) with something like this: RewriteRule ^index\.(php|htm|html|asp|cfm|shtml|shtm)/?$ / [NC,L] However, this is of course giving me an infinite redirect loop. What's the right way to do this? If possible, I'd like to have this work in both the development and production environment, so I don't want to specify an explicit url like http://www.mysite.com/ as the target. Thanks!

  Read the article

1 2 3  | Next Page >