Search Results

Search found 184 results on 8 pages for 'tomas flannery'.

Page 1/8 | 1 2 3 4 5 6 7 8  | Next Page >

• 10.10 freezing when sftp downloading

  - by aGr

  My ubuntu 10.10 is freezing during downloading from my other computer on sftp. I thought it might be some nautilus issues so I tried it via command line and I got the same thing - after few minutes the whole computer freezes. Mostly the numlock led is blinking (I've heard somewhere that this means a kernel panic), but not in 100% cases. I dunno if that helps but here is a log from /var/log/message in the time that this happened. At least I hope so - it wasn't that big, when it happened before. But this looks quite "errorish", right? (isn't complete - see bottom) Jan 5 17:57:49 tomas-ntb kernel: imklog 4.2.0, log source = /proc/kmsg started. Jan 5 17:57:49 tomas-ntb rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="953" x-info="http://www.rsyslog.com"] (re)start Jan 5 17:57:49 tomas-ntb rsyslogd: rsyslogd's groupid changed to 103 Jan 5 17:57:49 tomas-ntb rsyslogd: rsyslogd's userid changed to 101 Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Initializing cgroup subsys cpuset Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Initializing cgroup subsys cpu Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Linux version 2.6.35-24-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 (Ubuntu 2.6.35-24.42-generic 2.6.35.8) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-provided physical RAM map: Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffa8000 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dffa8000 - 00000000dffb0000 (ACPI NVS) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dffb0000 - 00000000dffbff00 (ACPI data) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dffbff00 - 00000000dfff0000 (ACPI NVS) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000120000000 - 0000000140000000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] DMI 2.5 present. Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] last_pfn = 0xdffa8 max_arch_pfn = 0x100000 Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Scanning 0 areas for low memory corruption Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified physical RAM map: Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 0000000000100000 - 00000000dffa8000 (usable) ... to long - for whole and better view click here

  Read the article

• Interview with Tomas Ulin at the MySQL Innovation Day

  - by Monica Kumar

  MySQL Innovation Day held on June 5, 2012 was a great event for the MySQL engineers, users and customers to gather, share and network. I was able to get a few minutes with Tomas Ulin, Vice President of MySQL Engineering at Oracle, to ask him some questions. Here are the highlights of my interview with Tomas. Monica: This was the first MySQL Innovation Day, correct?  Why now, what was the strategy behind hosting this kind of event? Tomas: In the last year, we have rolled out an incredible number of MySQL events worldwide – some targeted at developers that are new to MySQL and others for the MySQL savvy. At the MySQL Innovation Day, our first event of this kind,, we had a number of our key engineers presenting lightning talks delivering previews of key new features as well as discussing roadmap. Our goal is to keep an open dialogue with the MySQL community. In fact, we are hosting a two-day conference, another first, for the MySQL community called MySQL Connect on Sept. 29-30 in San Francisco. If you attended the MySQL Innovation Day and liked what we did, you are going to love MySQL Connect. We’ll have a lot more of our engineers and many users and community members presenting hour long sessions and hands on labs. Our engineers will be presenting new MySQL features as well offer previews of upcoming enhancements. Monica: What's the big take-away from today's MySQL Innovation Day? Tomas: I hope the most important takeaway for attendees was to see that Oracle has been driving, and continues to drive MySQL innovation with a steady stream of new great GA and Development Milestone releases. Monica: What were attendees most interested in? What feedback did they have? Tomas: Feedback from attendees was incredibly positive and encouraging. In particular, they liked the interaction with the MySQL engineers and were also excited about the new early access features in MySQL 5.6 and MySQL Cluster 7.3. In addition, sessions delivered by MySQL users like Facebook, Pinterest and Twitter were very well received. For example, Pinterest talked about using MySQL to scale from 0 to billions of page views/month, Twitter talked about “Scaling twitter with MySQL” and Facebook discussed the many options to implement MySQL master failover solutions. The presentations are already available for download while some of the session videos will be made available on the MySQL Innovation Day web page shortly. Monica: How would you distinguish the use of MySQL vs. Oracle Database? What key factors should customers consider? Tomas: MySQL and Oracle Database complement each other. They are very different products, best suited to different use cases. Customers can choose world-class solutions from Oracle to fulfill a variety of needs. MySQL is a great choice for enterprise web-based, custom and embedded apps. Oracle Database is the leading choice for enterprise packaged applications such as ERP, CRM as well as high-end data warehousing and business intelligence applications. Monica: What are the highlights of the current MySQL 5.6 Development Milestone Release and early access features for MySQL Cluster 7.3? Tomas: MySQL 5.6 development milestone release builds on MySQL 5.5 by improving: Optimizer for better Performance, Scalability Performance Schema for better instrumentation InnoDB for better transactional throughput Replication for higher availability, data integrity NoSQL options for more flexibility We announced some new early access features in MySQL 5.6, including binary log group commit. We also announced early access features in MySQL Cluster 7.3 including support for foreign key constraints. Monica: How do people get these releases? Tomas: You can access development milestone releases by going to: http://dev.mysql.com/downloads/mysqlThen select the “Development Release” tab. The MySQL Cluster 7.3 and other early access features can be downloaded at: http://labs.mysql.com Monica: What's coming up next for MySQL? Tomas: Our development team is working in overdrive, cranking out new features with community feedback. Don’t miss the MySQL Connect conference being held in San Francisco on Sept. 29 and 30th. My team and I will be there. I hope you can join us! Monica: Thank you for your time, Tomas. I look forward to seeing you at the MySQL Connect conference. To our followers, I hope you found this interview informative. I welcome your comments. Please stay tuned here for more updates on MySQL. Note: Monica Kumar is Senior Director of product marketing for Linux, Virtualization and MySQL at Oracle.

  Read the article

• MySQL Connect: Interview with Tomas Ulin

  - by Bertrand Matthelié

  The MySQL Connect conference is taking place September 29-30 in San Francisco. We asked a few questions about the event to Oracle’s VP of MySQL Engineering Tomas Ulin. Hi Tomas, to start with, what is MySQL Connect? A: MySQL Connect is a conference delivered by Oracle, with and for the MySQL Community. We’ll have over 60 technical breakout sessions, Birds-of-a-feather sessions and Hands-On labs running throughout the two days, plus the keynotes. So it’s a fantastic opportunity to learn a huge amount in only two days, and to network with Oracle engineers, users, customers and partners. When will the program be available online? A: The call for papers ended May 6 and we got an amazing response. The content committee has been working hard to build a great program, and the content catalog will be available by mid-June. Will Oracle MySQL engineers developing and supporting the products be there? A: Absolutely. And they’ll be available during the whole conference to answer questions. What do you plan to cover in your keynote? A: That’s a secret...:). Oracle is driving a lot of MySQL innovations and I will spend time on the latest developments, as well as help folks understand where we are going. What should attendees definitely not miss? A: We’ll have so many great sessions that the list could be long…but I also think the Saturday eve reception should not be missed. It’s always a lot of fun to meet so many MySQL users and have passionate discussions in a relaxed setting. What do you personally look forward to? A: Getting to meet the MySQL users and customers is probably most rewarding, as well as getting the chance to showcase the latest and greatest in our MySQL products. The development is so rapid that there are always new and exciting things to talk about. Oh, and I’ve also been told that there will be a game zone including Guitar Hero...:) In summary, why should people attend MySQL Connect? A: During two days, you’ll hang out with MySQL experts. You’ll learn a lot, you’ll meet the Oracle engineers developing and supporting the MySQL products, you’ll hear from customers using MySQL in a wide variety of applications and share your experiences with them, and you’ll have a lot of fun! Thank you Tomas! MySQL Connect registration is open – Register Now and you’ll save US$500 with the early bird discount! Interested in Sponsorship and Exhibit opportunities? You will find more information here.

  Read the article

• Double root folder vs single root folder

  - by Tomas

  On my Linux box, in bash, I have access to a "double root" folder denoted by two forward slashes: tomas:~ $ cd / tomas:/ $ ls bin/ cdrom@ ... tomas:/ $ cd // tomas:// $ ls bin/ cdrom@ ... The content of the folder and its subfolder is identical to the "normal" single slash root. The double slash does not go away when I access its subfolders. The annomaly does not repeat itself with three or more slashes; these are simple synonyms for the root: tomas:// $ cd home/tomas tomas://home/tomas $ cd /// tomas:/ $ cd //// tomas:/ $ What kindof place is it? Is it a bug? Can anyone explain the annomaly?

  Read the article

• Ubuntu won't start

  - by Tomas

  I've had Ubuntu installed, using WUBI, for some time now - a few months or so. It's worked fine until now, allowing me to login, use it's features etc... Two days ago, I turned on my computer and started Ubuntu. It loaded the GUI fine but just showed the loading screen and even after waiting 10 mins on this screen it still wouldn't show me the login page. I am enthusiastic about web design and development and all of my work, along with my portfolio is stored in Ubuntu. Cheers, Tomas EDIT: I am using 12.04 LTS.

  Read the article

• JRockit R28 "Ropsten" released

  - by tomas.nilsson

  R28 is a major release (as indicated by the careless omissions of "minor" and "revision" numbers. The formal name would be R28.0.0). Our customers expect grand new features and innovation from major releases, and "Ropsten" will not disappoint. One of the biggest challenges for IT systems is after the fact diagnostics. That is - Once something has gone wrong, the act of trying to figure out why it went wrong. Monitoring a system and keeping track of system health once it is running is considered a hard problem (one that we to some extent help our customers solve already with JRockit Mission Control), but doing it after something occurred is close to impossible. The most common solution is to set up heavy logging (and sacrificing system performance to do the logging) and hope that the problem occurs again. No one really thinks that this is a good solution, but it's the best there is. Until now. Inspired by the "Black box" in airplanes, JRockit R28 introduces the Flight Recorder. Flight Recorder can be seen as an extremely detailed log, but one that is always on and that comes without a cost to system performance. With JRockit Flight Recorder the customer will be able to get diagnostics information about what happened _before_ a problem occurred, instead of trying to guess by looking at the fallout. Keywords that are important to the customer are: • Extremely detailed, always on, diagnostics information • No performance overhead • Powerful tooling to visualize the data recorded. • Enables diagnostics of bugs and SLA breaches after the fact. For followers of JRockit, other additions are: • New JMX agent that allows JRMC to be used through firewalls more easily • Option to generate HPROF dumps, compatible with tools like Eclipse MAT • Up to 64 BG compressed references (previously 4) • View memory allocation on a thread level (as an Mbean and in Mission Control) • Native memory tracking (Command line and Mbean) • More robust optimizer. • Dropping support for Java 1.4.2 and Itanium If you have any further questions, please email tomas[email protected]. The release can be downloaded from http://www.oracle.com/technology/software/products/jrockit/index.html

  Read the article

• What is an elegant way to install non-repository software in 12.04?

  - by Tomas

  Perhaps I missed something when Canonical removed the "Create launcher" option from the right click menu, because I've really been missing that little guy. For me, it was the preferred way to install software that comes not in a .deb, but in a tar.gz, for example. (Note: in that tar.gz I have a folder with the compiled files, I'm NOT compiling from source) I just downloaded the new Eclipse IDE and extracted the tar.gz to my /usr folder. Now, I'd like to add it to my desktop and dash so it can be started easily. Intuitively I would right click the desktop and create a launcher. After this I'd copy the .desktop to /usr/share/applications. However, creating a launcher is not possible. My question: How would you install an already compiled tar.gz that you have downloaded from the internet? Below are a few things I've seen, but these are all more time-consuming than the right click option. If you have any better ideas, please let me know. Thanks! Manual copy & create a .desktop file: manually Simply extract the archive to /usr. Create a new text file, adding something along the lines of the code block below: [Desktop Entry] Version=1.0 Type=Application Terminal=false Exec="/usr/local/eclipse42/eclipse" Name="Eclipse 4.2" Icon=/home/tomas/icons/eclipse.svg Rename this file to eclipse42.desktop and make it executable. Then copy this to /usr/share/applications. Manually copy & create a .desktop file: GUI fossfreedom has elaborated on this in How can I create launchers on my desktop? Basically it involves the command: gnome-desktop-item-edit --create-new ~/Desktop After creating the launcher, copy it to /usr/share/applications.

  Read the article

• Find permission problem on Windows 2003

  - by Tomas

  Hello, I am trying to run process(console executable) on remote PC from asp.net application using WMI and get "Access is denied" problem. I have checked all event viewer logs on remote PC, no information related this. Where do I start searching for problem? Does Windows has some kind of permission monitor tool? Also I have tried to use Procmon.exe but hard to understand what to search, my process even do not listed in Procmon. Regards, Tomas

  Read the article

• Increase simultaneous connection count for one user on IIS6

  - by Tomas

  Hello, By default one user can open only one simultaneous connection on IIS6, how to increase this number? I do not find any option in IIS6 for this. Regards, Tomas

  Read the article

• Windows 2003 hidden anonymous shares with IP restriction

  - by Tomas

  Hello, I have created anonymous(everyone account) "hidden" shares on Windows 2003 to let our ASP.NET application access it from another server without credentials. I have added $ to share name to hide it from other users, but actually this is not solution because such shares can be easily discovered by other OS or some tools on Win. Can I restrict shared folder access by IP? Regards, Tomas

  Read the article

• SIP server ("gateway") for joining accounts

  - by Tomas Srna

  Hello, I have a phone supporting 2 accounts, but I need 4 accounts. Is it possible to install some sort of SIP server/gateway/proxy (on a linux server), that would register those 4 accounts and I would be able to connect to it as if it was 1 account? (With dialing rules, etc.) 3 of the accounts have incoming numbers. Thanks. Tomas.

  Read the article

• System.Drawing.Color in console application

  - by Tomas

  Hello, Simple question from .NET beginner. How to work with colors in console application? VS do not let me declarate System.Drawing.Color namespace. I need to assign color for one method in console application. Regards, Tomas

  Read the article

• jQuery RadioButton index

  - by Tomas

  Hello How to get checked RadioButton Index using jQuery? I need to read it and save to cookies to load status later using code $('input[name="compression"]')[{Reading from cookies code}].checked = true; 1<input name="compression" type="radio" value="1" checked="checked" /> 2<input name="compression" type="radio" value="2" /> 3<input name="compression" type="radio" value="3" /> Regards Tomas

  Read the article

• Is is possible to get an email attachment into App Engine's Blobstore?

  - by Tomás Flannery

  I've managed to get email attachments onto Amazon S3 from a GAE incoming email, but does anyone know a technique to get an attachment, like an image, into the blobstore. Any help would be much appreciated.

  Read the article

• .NET command line argument bug?

  - by Tomas

  Hello, I am trying to read command lien argument but it seems there is some kind of bug in .NET. The parameter which I pass to my console application /i "C:\Projects\PC\trunk\Simulator\PDF-Source\PDF-Source\bin\Debug\ConversionFiles\dummy.pdf" /o "result" CommandLine variable return three arguments, but I pass four and values of these arguments messed up. /i = true "C:\Projects\PC\trunk\Simulator\PDF-Source\PDF-Source\bin\Debug\ConversionFiles\dummy.pdf" = true /o = "result" As you see only the last argument is parsed corectlly. Is this bug? regards, Tomas My code static void Main(string[] args) { Arguments CommandLine = new Arguments(args);

  Read the article

• ASP.NET access files on another computer shared folder

  - by Tomas

  Hello, I have ASP.NET project which do some file access and manipulation, the methods which I use for file access are below. Now I need to access files on another server shared folder, how to do that? I easily can change file path to shared folder path but I get "can't access" error because shares are password protected. As I understand I need somehow to send credentials to remote server before executing methods below. How to do that? FileStream("c:\MyProj\file.doc", FileMode.OpenOrCreate, FileAccess.Write) Context.Response.TransmitFile("c:\MyProj\file.doc"); Regards, Tomas

  Read the article

• Class Loading Deadlocks

  - by tomas.nilsson

  Mattis follows up on his previous post with one more expose on Class Loading Deadlocks As I wrote in a previous post, the class loading mechanism in Java is very powerful. There are many advanced techniques you can use, and when used wrongly you can get into all sorts of trouble. But one of the sneakiest deadlocks you can run into when it comes to class loading doesn't require any home made class loaders or anything. All you need is classes depending on each other, and some bad luck. First of all, here are some basic facts about class loading: 1) If a thread needs to use a class that is not yet loaded, it will try to load that class 2) If another thread is already loading the class, the first thread will wait for the other thread to finish the loading 3) During the loading of a class, one thing that happens is that the <clinit method of a class is being run 4) The <clinit method initializes all static fields, and runs any static blocks in the class. Take the following class for example: class Foo { static Bar bar = new Bar(); static { System.out.println("Loading Foo"); } } The first time a thread needs to use the Foo class, the class will be initialized. The <clinit method will run, creating a new Bar object and printing "Loading Foo" But what happens if the Bar object has never been used before either? Well, then we will need to load that class as well, calling the Bar <clinit method as we go. Can you start to see the potential problem here? A hint is in fact #2 above. What if another thread is currently loading class Bar? The thread loading class Foo will have to wait for that thread to finish loading. But what happens if the <clinit method of class Bar tries to initialize a Foo object? That thread will have to wait for the first thread, and there we have the deadlock. Thread one is waiting for thread two to initialize class Bar, thread two is waiting for thread one to initialize class Foo. All that is needed for a class loading deadlock is static cross dependencies between two classes (and a multi threaded environment): class Foo { static Bar b = new Bar(); } class Bar { static Foo f = new Foo(); } If two threads cause these classes to be loaded at exactly the same time, we will have a deadlock. So, how do you avoid this? Well, one way is of course to not have these circular (static) dependencies. On the other hand, it can be very hard to detect these, and sometimes your design may depend on it. What you can do in that case is to make sure that the classes are first loaded single threadedly, for example during an initialization phase of your application. The following program shows this kind of deadlock. To help bad luck on the way, I added a one second sleep in the static block of the classes to trigger the unlucky timing. Notice that if you uncomment the "//Foo f = new Foo();" line in the main method, the class will be loaded single threadedly, and the program will terminate as it should. public class ClassLoadingDeadlock { // Start two threads. The first will instansiate a Foo object, // the second one will instansiate a Bar object. public static void main(String[] arg) { // Uncomment next line to stop the deadlock // Foo f = new Foo(); new Thread(new FooUser()).start(); new Thread(new BarUser()).start(); } } class FooUser implements Runnable { public void run() { System.out.println("FooUser causing class Foo to be loaded"); Foo f = new Foo(); System.out.println("FooUser done"); } } class BarUser implements Runnable { public void run() { System.out.println("BarUser causing class Bar to be loaded"); Bar b = new Bar(); System.out.println("BarUser done"); } } class Foo { static { // We are deadlock prone even without this sleep... // The sleep just makes us more deterministic try { Thread.sleep(1000); } catch(InterruptedException e) {} } static Bar b = new Bar(); } class Bar { static { try { Thread.sleep(1000); } catch(InterruptedException e) {} } static Foo f = new Foo(); }

  Read the article

• XNA 4 Deferred Rendering deforms the model

  - by Tomáš Bezouška

  I have a problem when rendering a model of my World - when rendered using BasicEffect, it looks just peachy. Problem is when I render it using deferred rendering. See for yourselves: what it looks like: http://imageshack.us/photo/my-images/690/survival.png/ what it should look like: http://imageshack.us/photo/my-images/521/survival2.png/ (Please ignora the cars, they shouldn't be there. Nothing changes when they are removed) Im using Deferred renderer from www.catalinzima.com/tutorials/deferred-rendering-in-xna/introduction-2/ except very simplified, without the custom content processor. Here's the code for the GBuffer shader: float4x4 World; float4x4 View; float4x4 Projection; float specularIntensity = 0.001f; float specularPower = 3; texture Texture; sampler diffuseSampler = sampler_state { Texture = (Texture); MAGFILTER = LINEAR; MINFILTER = LINEAR; MIPFILTER = LINEAR; AddressU = Wrap; AddressV = Wrap; }; struct VertexShaderInput { float4 Position : POSITION0; float3 Normal : NORMAL0; float2 TexCoord : TEXCOORD0; }; struct VertexShaderOutput { float4 Position : POSITION0; float2 TexCoord : TEXCOORD0; float3 Normal : TEXCOORD1; float2 Depth : TEXCOORD2; }; VertexShaderOutput VertexShaderFunction(VertexShaderInput input) { VertexShaderOutput output; float4 worldPosition = mul(input.Position, World); float4 viewPosition = mul(worldPosition, View); output.Position = mul(viewPosition, Projection); output.TexCoord = input.TexCoord; //pass the texture coordinates further output.Normal = mul(input.Normal,World); //get normal into world space output.Depth.x = output.Position.z; output.Depth.y = output.Position.w; return output; } struct PixelShaderOutput { half4 Color : COLOR0; half4 Normal : COLOR1; half4 Depth : COLOR2; }; PixelShaderOutput PixelShaderFunction(VertexShaderOutput input) { PixelShaderOutput output; output.Color = tex2D(diffuseSampler, input.TexCoord); //output Color output.Color.a = specularIntensity; //output SpecularIntensity output.Normal.rgb = 0.5f * (normalize(input.Normal) + 1.0f); //transform normal domain output.Normal.a = specularPower; //output SpecularPower output.Depth = input.Depth.x / input.Depth.y; //output Depth return output; } technique Technique1 { pass Pass1 { VertexShader = compile vs_2_0 VertexShaderFunction(); PixelShader = compile ps_2_0 PixelShaderFunction(); } } And here are the rendering parts in XNA: public void RednerModel(Model model, Matrix world) { Matrix[] boneTransforms = new Matrix[model.Bones.Count]; model.CopyAbsoluteBoneTransformsTo(boneTransforms); Game.GraphicsDevice.DepthStencilState = DepthStencilState.Default; Game.GraphicsDevice.BlendState = BlendState.Opaque; Game.GraphicsDevice.RasterizerState = RasterizerState.CullCounterClockwise; foreach (ModelMesh mesh in model.Meshes) { foreach (ModelMeshPart meshPart in mesh.MeshParts) { GBufferEffect.Parameters["View"].SetValue(Camera.Instance.ViewMatrix); GBufferEffect.Parameters["Projection"].SetValue(Camera.Instance.ProjectionMatrix); GBufferEffect.Parameters["World"].SetValue(boneTransforms[mesh.ParentBone.Index] * world); GBufferEffect.Parameters["Texture"].SetValue(meshPart.Effect.Parameters["Texture"].GetValueTexture2D()); GBufferEffect.Techniques[0].Passes[0].Apply(); RenderMeshpart(mesh, meshPart); } } } private void RenderMeshpart(ModelMesh mesh, ModelMeshPart part) { Game.GraphicsDevice.SetVertexBuffer(part.VertexBuffer); Game.GraphicsDevice.Indices = part.IndexBuffer; Game.GraphicsDevice.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, part.NumVertices, part.StartIndex, part.PrimitiveCount); } I import the model using the built in content processor for FBX. The FBX is created in 3DS Max. I don't know the exact details of that export, but if you think it might be relevant, I will get them from my collegue who does them. What confuses me though is why the BasicEffect approach works... seems the FBX shouldnt be a problem. Any thoughts? They will be greatly appreciated :)

  Read the article

• GRUB2 prompt instead of BURG boot screen after mistake during BURG installation

  - by Tomas Lycken

  I just installed BURG, but during the installation I made a mistake: after the package was installed, I got to some command-line based GUI for configuration, where I forgot to mark my (only) hard disk as the boot device before I hit OK. I tried to reinstall (apt-get purge burg && apt-get autoremove followed by apt-get install burg) but I wasn't able to get to the same screen again (I didn't find the GUI). When I now start my computer, I am taken to a GRUB2 prompt and no BURG (or GRUB2) boot menu is shown. Since I don't know any GRUB commands and I am helpless. How do I reinstall GRUB/BURG correctly? Update: I rebooted my computer, and got a BURG prompt (which appears to be the same thing as a GRUB prompt, but if there's a difference I wouldn't know it...). I have booted from a Live USB, but I don't know what to do next. The text above has been updated to reflect this new situation - for the original text, please see the previous versions of this post. (No answers were posted when this was edited...)

  Read the article

• Wine 1.2 crash after I start Mega 5.0

  - by Tomáš Šíma

  I installed Mega 5.0 by running "sudo sh MEGA5_Setup_deb_v2.sh" The application downloaded wine 1.2 as mega requires in order to work under Ubuntu. However every time I start the application through the icon provided, wine crashes asking me to send/save bug report, the problem is that if I choose to do so, megas starting window pops up covering the bug report window leaving me unable to do anything (as it won't move) The only solution I have come up with is to log out and log back in, as I cancels wine. I beg you following: Please post detailed step by step instructions how to deal with said problem Tell me if forceful log out, can damage computer of any of my data Please forgive me my weak English as it is not my native language. Also forgive me my weak skills concerning Ubuntu usage as I have me forced to switch to Ubuntu this very day. Thank you.

  Read the article

• Programming as a minor

  - by Tomas Cokis

  Hello Everyone! I've never asked a question here at programmers, and for reasons which will become obvious later I've never answered one here, but I do poke around in short bursts. Anyway, I'm 15 right now, and I've been programming in C++ for 4 years, just working on my own projects that are aim so high as to never be finished. I've been working on a single project for the last year, and every 3 months, I add a new system into it. It might be a value tabling directory enabled log system, or a render system, or a class to load up xml files, whatever it is, I don't mind too much that the overall project (a 3d engine) isn't ever going to get finished, I just get some satisfaction from getting what I have done building and running. I don't know what I want to do when I grow up, although I suspect I'll go into some form of engineering, but I was interested in knowing if I do choose to go into a career as a developer, what kind of material I could look at to push myself up and get myself experience that might help my career later. I'm not talking about books in particular, I'm more interested in subjects areas that will get me access to good job opportunities, or that will give me a hand-up if I do computer science and software related courses at uni. One of the things I was thinking of doing was designing some of the logic gate components of a small computer - which I started briefly over the holidays, working out integer addition, subtraction and multiplication. That kind of stuff interests me, but is it really useful - or more useful then just more programming? But anyway, Any advice? Should I continue on my perpetual 3d engine? Are there any other projects or particular accomplishments that would help my education? Perhaps I should mention that I live in Perth, Australia, so local software companies are likely to be more scarce then usual.

  Read the article

• NetBeans PHP Community Council

  - by Tomas Mysik

  Hi all, today we would like to inform all of you that now you have a chance to improve NetBeans via NetBeans PHP Community Council. The author of this activity is Timur Poperecinii and he would like to tell you a few words about it. Hello passionate technical people, First of all let me introduce myself: my name is Timur, I’m a developer from Moldova (that little country between Romania and Ukraine), I develop mostly in .NET and JQuery, but I love to learn more, not being an expert I am familiar with Java (Struts2, Play), PHP (Symfony2), Ruby (Rails), Sencha Touch 2 and other technologies. I was “introduced” in PHP recently by a client of mine who requested to make the work specifically in PHP. Let me tell you a little story about my experience with open source and IDEs: when I was studying in university in 2007 I think, I did a simple little application in PHP and thought “Damn, if only there was a good IDE for PHP so I could relax and no having to remember all the function names”, then when I searched on internet pretty much everyone was using Vim or Emacs on Linux, but it had no autocomplete anyway, just syntax highlighting. I remember using some tool like Notepad++ I think. Nowadays everything changed, we have highlighting and autocomplete for about all standard things in PHP in many IDEs. I use NetBeans for PHP, and I really am happy with the experience I have there with standard PHP code, but for frameworks I still think there is lots of room for improvements. For example we have some Symfony 2 and Twig support. But I’d love to see more of that coming, for example I’m a big fan of file templates, where the main goal is to not waste time on writing over and over again something that can be generated, and it counts even more when you don’t have a lot of autocomplete. So what I thought, “Hey I know Java a little, and NetBeans has plugins, so may be it worth trying to do a file templates plugin”, and so I did, you can find details about my Unified Udevi Symfony2 Plugin for NetBeans 7.2 on my blog. It wasn’t hard, and it even was fun! Give back to open source Now think a little, NetBeans is an open source project and PHP support is just a part of it, so the resources are pretty limited in this area. But we as a community that uses this product, want to have the best possible experience with PHP and frameworks(!!!). So why don’t we GIVE BACK TO OPENSOURCE ? Imagine an IDE that can do all the things you wanted + it is free. Now how far is NetBeans from that point? I guess not so far – you might miss a little niche thing that you use on a daily basis, but then the question appears why don’t you make it happen on your own? NetBeans PHP Community Council What I proposed is to create a NetBeans PHP Community Council that will be formed of people willing to change something, willing to create plugins for their own needs and for the needs of the community, test the plugins created by them too, and basically evolve NetBeans in direction they want to reach. I already talked with the NetBeans PHP team. They are only happy to help this Council, with technical advises, opening some APIs we might need to have access to, and other things. One important thing to mention is that this Council is a Community project, so though we’ll have direct discussions with NetBeans PHP Dev team, NetBeans is not the leading force here, it is the community. You can see more details about the goals and structure I proposed at NetBeans PHP Community Council wiki page. We use this mail list: [email protected] for discussions and topics related to the Council. How can I join To join the NetBeans PHP Community Council please send an email to [email protected] with the subject of the mail starting with [Council New Member]. You can subscribe to this mail list here:http://netbeans.org/projects/php/lists. in your mail please indicate your location, age and experience both in Java and PHP. I need these data to assign you to a team. A response will be send to you with your next assignment and some people to contact. I really hope that you’ll make a step forward and try to make your everyday use of NetBeans even more fun.

  Read the article

• Why does my Grub have two entries for Windows?

  - by Tomas Lycken

  I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

  Read the article

• Backward compatibility with event-sourcing

  - by Tomas Jansson

  How do you stay backward compatible with event-sourcing? Let say you release a version that has one kind of event, let call it X. You know how to handle that event in all the systems that extracts the events from the event source. In a later release you make a change to event X or delete it, how do you stay backward compatible with that? To have a fully functional system you need to be able to handle the old event as the same time as you need to handle the updated version. Or if you delete that event type, then you will be stuck with code that is only there to handle legacy events which in my head can be a little bit messy in the long run.

  Read the article

• Remote synchronization

  - by Tomas Mysik

  Hi all, today we would like to show you another improvement we have prepared for NetBeans 7.2. Today, let's talk a little bit about remote synchronization. If you already use our simple (S)FTP client, this enhancement could be useful for you. Simply right click on Source Files and select Synchronize. Please notice that the remote synchronization works better only on the whole project (it means that the Source Files must be selected). The Synchronize action is also available on individual files (more files can be selected at once) but the suggested operation (download, upload etc.) does not work so precisely. Also please notice that the suggested operations are not 100% reliable since the timestamps provided by FTP servers are not exact. Once the remote files (their names and paths only, of course) are fetched, the main dialog appears: As you can see, NetBeans tries to suggest you operations (upload, download etc.) which should be done for each individual file of your project. If you are interested only in some particular changes, you can simply filter the list: Since we have a file conflict, we need to resolve it first. Fortunately this is very easy because we just select the desired file and click the Diff button . The remote version of our file is downloaded and compared with the local version. The resut is displayed in the dialog where you can easily apply and/or refuse the remote changes or even simply type manually to the local version of the selected file: Once we are done with our changes, the operation for the selected file changes to Upload and the file is marked with * (since we made some changes). Please notice that if you now click the Cancel button, in fact no changes are done in our local file. As you can see, if we have one or more files selected, we can change their operation to: no operation (file won't be synchronized) download upload delete (both local and remote file) reset (the operation is resetted to the original one suggested by NetBeans and also all changes done via Diff action are discarded) Now we are ready to synchronize our project. NetBeans will show us the synchronization summary (this dialog can be omitted, see the Show Summary checkbox on the previous image). The synchronization itself starts and we can see its progress and of course its result. As always, all the operations can be reviewed in the Output window. That's all for today, as always, please test it and report all the issues or enhancements you find in NetBeans BugZilla (component php, subcomponent FTP support).

  Read the article

1 2 3 4 5 6 7 8  | Next Page >