Search Results

Search found 13 results on 1 pages for 'touchsmart'.

Page 1/1 | 1 

  • Why is my HP TouchSmart tx2 1025dx shutting down?

    - by Kristy
    I'm having an issue with my HP tx2 1025dx laptop. Sometimes it will spontaneously shut itself off. First, the screen will go out. Next, the computer itself will shut down. This usually occurs when I am doing something that requires a lot of resources, but lately can happen when I am doing something as simple as using an Office app. I think it may be heat related, if I try to boot the laptop after it shuts itself down, it will shut itself down again before startup is complete. If I let it cool down for a while and then come back to it, the computer will boot properly. These shutdowns are always accompanied by high temperatures on the bottom right side, as well as the right side of the keyboard. I am using a laptop cooler with two fans, and it is not making a bit of difference. This is the second TouchSmart we have owned, the first one had the same issues, we sent it in to HP after it finally refused to reboot. They “fixed” it, and it worked fine for about a month before doing the exact same thing. Unfortunately we had bought the second one before the issues began with the original, if I had known this would be a problem, I would not have purchased another TouchSmart. This particular laptop we have had for more than a year and it didn’t start these issues until a couple of months ago. Any suggestions as to how to fix this problem?

    Read the article

  • Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

    - by Schof
    This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

    Read the article

  • HP ENVY TouchSmart 15t-j000 Quad Edition + custom mSata Plextor M5M 64GB SSD

    - by Akash Ramani
    The ssd did not come along with the laptop, so i bought one myself and physically installed it. I've booted into Ubuntu from a USB drive and my goal is to install / and /home in the SSD. (because most of the actual media exists on the HDD) The only problem is i'm unable to detect the SSD while configuring the partitions. I know the SSD is not the problem because it recognizes in a different laptop. I've followed the instructions shown in https://help.ubuntu.com/community/UEFI but that still doesn't help in identifying the SSD partition. Any help would be appreciated. (p.s: I'm wondering if i have to prepare the SSD through windows or something like that)

    Read the article

  • How do I install Ubuntu on an HP Touchsmart 600?

    - by user70004
    I have a hp touchsmart 600 pc series. I tried to install the lastest version of ubuntu (12.04 LTS, 64bits) but it would not install. I popped in the cd and the menu asked for a reboot. Which I did. As ubuntu was about to install(purple background with 2 symbols underneth) the screen was dark and a prompt kept blinking for like over 10 minutes. So I turned off my pc and loaded my window os. I ran ubuntu again and used the help install feature. Needless to say the same thing happen again! does ubuntu work on hp touchsmart computers?

    Read the article

  • Integrating virtual keyboard on a HP TouchSmart with an Adobe AIR app

    - by Alan
    Hi, Does anyone know if it's possible to integrate the ToushSmart's virtual keyboard with an Adobe AIR application? In most programs (Internet Explorer, Firefox, etc), when a user touches a text field a little keyboard icon automatically pops up which, when pressed, will bring up the virtual keyboard. However, this doesn't happen when clicking on text input fields in Adobe AIR applications. Has anyone had any experience working with AIR/Flash and touchscreens? Is there any API that can tell Windows (or the HP virtual keyboard specifically) that the user has clicked in a text field and that the virtual keyboard should be shown? The text fields are the standard kind (fl.controls.TextInput). Any suggestions would be greatly appreciated. Thanks in advance!

    Read the article

  • How to install hardware drivers for my laptop

    - by John Flisk
    Everytime I change the OS I usually format my laptop. It is an HP tx-2 Touchsmart. It has a touchscreen and additional hardware that isn't working (i.e. volume control buttons and the network discovery) If I was on windows I would just download the hardware drivers from the HP website. How do I go about installing the software for the built-in hardware of my laptop? I am new to the community and I really want to get this computer working like it used to, to get the full Ubuntu experience. Please direct me, thank you.

    Read the article

  • Windows 7 Windows XP mode cannot run - it says "Require Hardware Assisted Virtualization"

    - by Jian Lin
    After installing the 2 files for Windows 7 Windows XP mode, the Start Menu now has Windows Virtual PC Windows XP Mode but clicking on the first merely brings out a folder, and clicking on the second brings out a dialog box that says: "Require Hardware Assisted Virtualization" Does that mean the machine cannot support Windows 7 Windows XP mode? I am running Win 7 Ultimate 64 bit edition. This is the dialog box: Update: the computer is an HP TouchSmart, with American Megatrends BIOS v02.61. I looked into the BIOS set up but it is quite simple and dosen't have something for "hardware assisted virtualization". The CPU is Intel Core 2 Duo T5750.

    Read the article

  • Grub not showing on startup for Windows 8.1 Ubuntu 13.10 Dual boot

    - by driftking96
    K im so a newbie to Ubuntu and i bought a Windows 8 pre-installed laptop last month. I updated to Windows 8.1 and then i thought about installing Ubuntu as a dual boot so i could mess around and learn more about it. So i followed a Youtube tutorial ( http://www.youtube.com/watch?v=dJfTvkgLqfQ ). And i got my stuff working fine. The first few times i booted i got the GRUB menu instead of my default HP Boot OS Manager, and i was able to select my OS. So i went to sleep and the next day i turned on my computer and the GRUB menu did not show up. I tried several times and it didnt automatically show up. In order for me to see the GRUB menu i had to turn on my PC and on start had to press ESC to pause startup and press F9 to get boot options. Then from there i had to pick from OS Boot, Ubuntu, Ubuntu (Yes there were two Ubuntus available) and a default EFI file thingy. When i click the first Ubuntu i get the GRUB Menu (I was too scared to try the second incase i screwed my laptop up) and i can safely load Ubuntu from there and use it (although i do have to increase my brightness everytime i load Ubuntu bec it somehow reduces my brightness to complete darkness on boot) So my problem here is why isnt my GRUB showing on boot, after it worked on the first day? I was on Windows 8.1 while typing this and if you have any questions or answers, i will happily answer or use them as a solution to the best of my abilities. BTW my laptop is a HP TouchSmart j-078CA.

    Read the article

  • Mouse selects everything on its own

    - by meneer
    I have a strange problem that my mouse keeps selecting everything I point to. For example, if I open Rhythmbox, then at the top of the screen there is a text which says which song is playing. If I move my mouse over this text, then it will select this text; but I am not clicking. This behaviour does not happen in all programs. For example in Firefox I have no problem at all. Maybe it is Gtk related? Nautilus also behaves strangely; I cannot open files by clicking on them, I have to select and make a box around the file and then press enter to open it. If I click, then nothing happens. Similar problems also happen with other Gtk software. I think the problem might be related to touchscreen issues (I have a touchscreen). I run Gnome 3 on Ubuntu 12.04. I have a HP touchsmart 610 desktop computer. Any help is greatly appreciated. UPDATE: I just did a fresh reinstall, and I am 90% certain that it is related to the touchscreen drivers. Here is what happens when I reinstall. At first boot, so exactly after install, everything works fine, except the touchscreen: The touchscreen does not respond. I update ubuntu, because I installed from an old CD (CD with ub. 12.04). Then on next reboot I have touchscreen working , but the working touchscreen comes together with the mouse selecting everything on its own. SECOND QUESTION: Would anybody know how I could figure out what those touchscreen drivers are (so that I can disable them) ?

    Read the article

  • Silverlight 4 desktop application sometimes zooms when touching it... and cannot zoom out

    - by TimothyP
    Hi, I have a Silverlight 4 desktop application which I control using a touchscreen (on an HP Touchsmart). Most of the time it works fine but sometimes when clicking something everything just zooms in and every time it happens things get bigger and bigger. The only way to get the normal size again is by restarting the application. Has anybody got any idea what might be causing it ? Does not seem to happen in browser mode. Is there a way to prevent zooming? Thnx

    Read the article

  • Display Driver Issue on an hp TX2-1160ea Notebook

    - by Sam
    I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

    Read the article

  • Windows 7: Touch gestures in IE not working without explorer.exe being run once

    - by Michael
    Details: Internet Explorer 9 and Windows 7 Professional, running on a HP TouchSmart (touch screen PC). It is going to be a kiosk PC (running a custom GUI for displaying websites). Scenario 1: When running Internet Explorer as a normal program in Windows 7, touch functions work perfectly. I can scroll the website by dragging it with my finger, I can pinch zoom and I can touch-and-hold right click. I now change the default shell in Windows to Internet Explorer (ie. IE starts instead of explorer.exe). Internet Explorer of course starts up when logging in. However, touch functions are reduced to basic clicking (no dragging, no pinch zooming, no touch-and-hold right click). Then I manually start explorer.exe, and the touch functions work again! And here is the weird part: When I kill explorer.exe, the touch functions keeps working - even if I close IE and start a new instance. Scenario 2: The exact same, but instead of changing the default shell to Internet Explorer, I change it to my own program, which uses an embedded Internet Explorer ("WebBrowser"). Same thing happens. What I've tried: Autorun programs: When explorer.exe launches, it launches all the autorun programs. There are no relevant programs being run by explorer, but just in case, I have manually started all the autorun programs, so that it is identical (but without explorer.exe) to a normal login. It still does not work (until I launch explorer.exe). Specifically TabTip.exe, TabTip32.exe and wisptis.exe are all running. All services are also started. To sum it up Running explorer.exe once changes something in the touch capabilities of Internet Explorer. It doesn't matter if explorer.exe is running - as long as it has been run once. Does anyone know what causes this behavior? Or how I can circumvent it neatly? Thanks!

    Read the article

  • Touch gestures in IE not working without explorer.exe being run once

    - by Michael
    Edit: Rephrasing my question: Upon further troubleshooting, I can conclude that: Touch gestures (dragging, pinch to zoom, touch-and-hold right click) in Internet Explorer start to work when: The system has been running for ~2 minutes. This coincides with the delayed start of services. Explorer.exe is being run, then killed. I assume Explorer.exe starts some services? The services with delayed start are as follows: Security Center Software Protection Windows Defender, Search and Update Windows Font Cache Service Microsoft .NET Framework NGEN v4.0.30319_X64 and X86 I see no connection between these services and touch gestures, but just in case, I manually tried starting these services, but without luck. What else happens delayed after system boot, which also happens when explorer is started? Old question: Details: Internet Explorer 9 and Windows 7 Professional, running on a HP TouchSmart (touch screen PC). It is going to be a kiosk PC (running a custom GUI for displaying websites). Scenario 1: When running Internet Explorer as a normal program in Windows 7, touch functions work perfectly. I can scroll the website by dragging it with my finger, I can pinch zoom and I can touch-and-hold right click. I now change the default shell in Windows to Internet Explorer (ie. IE starts instead of explorer.exe). Internet Explorer of course starts up when logging in. However, touch functions are reduced to basic clicking (no dragging, no pinch zooming, no touch-and-hold right click). Then I manually start explorer.exe, and the touch functions work again! And here is the weird part: When I kill explorer.exe, the touch functions keeps working - even if I close IE and start a new instance. Scenario 2: The exact same, but instead of changing the default shell to Internet Explorer, I change it to my own program, which uses an embedded Internet Explorer ("WebBrowser"). Same thing happens. What I've tried: Autorun programs: When explorer.exe launches, it launches all the autorun programs. There are no relevant programs being run by explorer, but just in case, I have manually started all the autorun programs, so that it is identical (but without explorer.exe) to a normal login. It still does not work (until I launch explorer.exe). Specifically TabTip.exe, TabTip32.exe and wisptis.exe are all running. All services are also started. To sum it up Running explorer.exe once changes something in the touch capabilities of Internet Explorer. It doesn't matter if explorer.exe is running - as long as it has been run once. Does anyone know what causes this behavior? Or how I can circumvent it neatly?

    Read the article

1