Search Results

Search found 129 results on 6 pages for 'vijit jain'.

Page 1/6 | 1 2 3 4 5 6 | Next Page >

Oracle SOA Suite for healthcare integration Dashboard By Nitesh Jain

- by JuergenKress

Oracle SOA Suite Healthcare came up with a new way of monitoring where user can configure a dashboard and follow the dynamic runtime changes. Oracle SOA Suite for healthcare integration dashboards display information about the current health of the endpoints in a healthcare integration application. You can create and configure multiple dashboards as needed to monitor the status and volume metrics for the endpoints you have defined. The Dashboards reflects changes that occur in the runtime repository, such as purging runtime instance data, new messages processed, and new error messages. You can display data for various time periods, and you can manually refresh the data in real time or set the dashboard to automatically refresh at set intervals. Dashboard shows the following information: Status: The current status of the endpoint, such as Running, Idle, Disabled, or Errors. Messages Sent: The number of messages sent by the endpoint in the specified time period. Messages Received: The number of messages received by the endpoint in the specified time period. Errors: The number of messages with errors for the endpoint in the given time period. Last Sent: The date and time the last message was sent from the endpoint. Last Received: The date and time the last message was received from the endpoint. Last Error: The date and time of the last error for the endpoint. It also shows the detailed view of a specific Endpoint. The document type. The number of messages received per second. The total number of message processed in the specified time period. The average size of each message. For more information please visit Nitesh Jain blog SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Suite,SOA heathcare,soa health,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

Read the article
Amit Jasuja's Session at Gartner IAM with Ranjan Jain of Cisco

- by Naresh Persaud

If you did not get a chance to attend Amit Jasuja's session at Gartner IAM this week in Las Vegas, here is a summary of the session and a copy of the slides. The agenda featured an introduction by Ray Wagner, Managing VP at Gartner, followed by Amit discussing the trends in Identity and Access Management shaping Oracle's strategy. Today we are seeing the largest re-architecture in a decade. Every business from manufacturing to retail is transforming the way they do business. Manufacturing companies are becoming manufacturing services companies. Retail organizations are embracing social retail. Healthcare is being delivered on-line around the clock. Identity Management is at the center of the transformation. Whether you are Toyota embracing a social network for cars or launching the next Iphone, the Identity of the user provides context to enable the interaction and secure the experience. All of these require greater attention to the context of the user and externalizing applications for customers and employees. Ranjan discussed how Cisco is transforming by integrating 1800 applications to a single access management framework and consolidating 3M users across 4 data centers to support internal and external processes. David Lee demonstrated how to use Oracle Access Manager 11g R2 on a mobile application to sign-on across multiple applications while connecting mobile applications to a single access control policy.

Read the article
HTML Redirect issue with Apache2

- by Vijit Jain

I am facing an issue with the ProxyPass on my Apache server on Ubuntu. I have configured Apache to deal with Virtual Hosts on my server. There is an application with runs on the server and uses ports 8001 8002. I need to do something like www.example.com/demo/origin to display the contents that I would see when I visit www.example.com:8000. The contents to be displayed are a host of HTML pages. This is the section of the virtual host config that has issues ProxyPass /demo/vader http://www.example.com:8001/ ProxyPassReverse /demo/vader http://www.example:8001/ ProxyPass /demo/skywalker http://www.example.com:8002/ ProxyPassReverse /demo/skywalker http://www.example.com:8002/ Now when I visit example.com/demo/skywalker, I see the first page of port 8002, say the login.html page. The second should have been www.example.com/demo/skywalker/userAction.html, instead the server shows www.example.com:8000/login.html. In the error logs I see something like: [Mon Nov 11 18:01:20 2013] [debug] mod_proxy_http.c(1850): proxy: HTTP: FILE NOT FOUND /htdocs/js/demo.72fbff3c9a97f15a4fff28e19b0de909.min.js I do not have any folder htdocs in the system. This is only an issue while viewing .html pages. Otherwise, no such issue occurs. When I visit localhost:8001 it will show any and all contents without any errors or issues. www.example.com/demo/skywalker displays a separate webpage www.example.com/demo/origin displays a different webpage and www.example.com/demo/vader displays a different webpage. I have also tried to use one more type of combination, <Location /demo/origin/> ProxyPass http://localhost:8000/ ProxyPassReverse http://localhost:8000/ ProxyHTMLURLMap http://localhost:8000/ / </Location> This fails as well. I would greatly appreciate if anyone can help me resolve this issue.

Read the article
Merging paragraphs in MS Word 2007

- by Rajneesh Jain

My name is Rajneesh Jain from New Delhi, India. I saw your code on merging and re-formatting paragraphs in MS Word 2007. I am facing problem of text overflow. The code I used is: Sub FixParagraph() ' ' FixParagraph Macro ' ' Dim selectedText As String Dim textLength As Integer selectedText = Selection.Text ' If no text is selected, this prevents this subroutine from typing another ' copy of the character following the cursor into the document If Len(selectedText) <= 1 Then Exit Sub End If ' Replace all carriage returns and line feeds in the selected text with spaces selectedText = Replace(selectedText, vbCr, " ") selectedText = Replace(selectedText, vbLf, " ") ' Get rid of repeated spaces Do textLength = Len(selectedText) selectedText = Replace(selectedText, " ", " ") Loop While textLength <> Len(selectedText) ' Replace the selected text in the document with the modified text Selection.TypeText (selectedText) End Sub

Read the article
Finding all Stored procedures calling a function

- by Abhishek Jain

Hi, How can I find out all the stored procedures that are calling a particular user defined function in SQL Server 2005. Or how to assign a defult value to a parameter in a user defined function so that when a stored procedure calls that function and does not pass any value to that parameter function assumes the default value. Regards, Abhishek jain

Read the article
How to upload a huge(GBs) file to a webserver

- by Aman Jain

Hi I want to create a web interface that will allow users to upload huge files. These files are actually vmdk files(Virtual Machine Disks), and they can be multi GB in size. I think this makes the situation different from normal file uploads(10-20MB file uploads). So any advise on how to achieve the same in an efficient and fault tolerant way, is appreciated. Thanks Aman Jain

Read the article
SIP and Java, where to start and with what?

- by Senne

I want to implement the SIP protocol in java and would want to be able to create different clients (5 or more) and make them connect to a proxy server. This is all for testing purposes so I would like to be able to see well what's happening on a rather low level. The clients should first be able to communicate trough text and later on maybe also by audio. (If I ever get that far) I already read a bit about the JAIN libraries and what I understood from that is that they are not really well suited for the server side? I also didn't really find any proxy server examples, tutorials, using JAIN. I also found this SIP Servlet Tutorial book, I used HTTP servlets in the past but should I prefer servlets or JAIN or ...? I'm quite new to SIP so I don't really know where to start or what to choose in combination with java.

Read the article
Whether to go for part MBA or not [closed]

- by Santosh singh

I need your help in knowing more about SP Jain Finance MBA. I am currently working in Singapore as a tech lead having 6.5 year experience in IT, planning to do part time MBA. There are currently 3 specialisation offered- marketing,operations and finance- I am not sure which one to choose. Whether I would be able to find a job in finance after getting MBA degree from SP Jain. Basically I do not forsee any career growth in my present company, so in a fix should I do MBA or go for some specialised course if you suggest.

Read the article
i want to wrap the image as well text around the products like mug, t Shirt, crystals

- by Sachin jain

I am working on shopping cart. pls follow the link www.photohaat.com In the mug section whenever the user upload the image i want to wrap the complete image onto the mug so that he/she will saw the final output immediately. we develop this shopping cart on PHP language. I am trying to resolve this problem but unfortunately can't get a success. If you have any solutions regarding this than please let me know. Thanks & Regards Sachin Jain

Read the article
iPhone in App purchase : Working but Not

- by Vimal Jain

Hi, I have added in App purchase functionality within my application. We have tested it successfully on iPhone (in sandbox mode). After successfully testing, we sent the application for final testing to tester situated at other country. In strange case, the tester is not able to test in App purchase functionality. He is getting "Invalid Product Id" error. We are giving same build to tester which is working perfectly at our side. The whole application is working perfectly except in app purchase functionality. If any guesses. Thanks, Vimal Jain.

Read the article
Ubuntu 14.04 Boot Problem

- by Sanyam Jain

I am currently using windows 7 and wanted to try out Linux. I found out that Ubuntu is the most easy to learn Linux OS. So I create a Live USB of Ubuntu 14.04 with the help of the following link: How to make your own "Ubuntu LiveUSB" I created the Live USB successfully, but when I started my PC, i encountered an error message saying : Kernel Panic - not syncing: Attempted to kill init! Along with a lot of commands which I cannot even understand. I would be very grateful if anyone can tell me what is wrong.

Read the article
Oracle B2B Started Kit

- by Nitesh Jain Oracle

This post is for audience who is starting their journey with Oracle B2B 11g practice. Thought of writing this article as even i wondered as to what to do where to search while i was like you. Hope this material will help you to understand Oracle B2B closely: Oracle B2B OTN : http://www.oracle.com/technology/products/soa/b2b/index.html Download Location: http://www.oracle.com/technology/products/soa/soasuite/collateral/downloads.html#11.1.1.3.0 Installation Guide: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e13925/toc.htm User Guide: http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/toc.htm Sample Location: B2B Samples are part of SOA sample at below location: http://www.oracle.com/technology/sample_code/products/soa/index.html Developer Notes / Step by Step configuration guide: http://www.oracle.com/technology/products/soa/b2b/index.html http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU001_EDI.pdf http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU002_HL7.pdf http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU003_ebxml.pdf Blog: http://blogs.oracle.com/oracleb2bgurus/ Forum: http://forums.oracle.com/forums/forum.jspa?forumID=242&start=0 This article is as per Oracle B2B 11g PS2 Release (11.1.1.3.0)

Read the article
Changing Endpoint URL for a Web Service Data Control

- by vishal.s.jain(at)oracle.com

When you move your application from Development to Production, there is more often then not, a need to change the web service endpoint URL in your ADF application. If you are using a Web Service Data Control(WSDC), you can do this in more than one ways. The following example illustrates how this can be done.At Design TimeIf the application workspace is in your control, you can quickly do this by updating the definition in DataControl.dcx file:Along with this, you will also need to change the endpoint in connections.xml. So invoke the Edit Connections dialog: Then, change the endpoint URL.At DeploymentAnother way to change is changing the endpoint at the ear level, at deployment. So when you select Deploy -> Application Server at the Application level, it will bring up a Deployment Configuration dialog, in which you can edit the WSDL URL:Also, change the Port URL:At Post DeploymentIf your need to change this post deployment, you can do it through Oracle Enterprise Manager. But for this, your application needs to be configured with a writable MDS repository. It is recommended you use a Database MDS store during deployment. So have your application configured (by having an entry in adf-config.xml) and server configured (by having a MDS store registered). Once done, you can configure the ADF Connection in EM for this application:Change the WSDL location here on 'Edit':Also, change the Port using Advance Connection Configuration:Change the Endpoint Address here:Apply Changes and you are done!

Read the article
Taglist: Failed to generate tags for macvim [migrated]

- by Mohit Jain

When ever I am trying to open a file in my rails project using macVim. I am geting an error Taglist: Failed to generate tags for ....... But it works perfectly in terminal vim. Why its happening? I am a new bie and just installed everything using this dotvim repo. I installed ctags using these commands that I got from this git $ ctags -R --exclude=.git --exclude=log * ctags: illegal option -- R usage: ctags [-BFadtuwvx] [-f tagsfile] file ... #you need to get new ctags, i recommend homebrew but anything will work $ brew install ctags #alias ctags if you used homebrew $ alias ctags="`brew --prefix`/bin/ctags" #try again! ctags -R --exclude=.git --exclude=log * which ctags on terminal returning, same if i do from vim or gvim using ! (bang): /usr/bin/ctags Can anyone help me?

Read the article
Oracle B2B 11g - Transport Layer Acknowledgement

- by Nitesh Jain Oracle

In Health Care Industry,Acknowledgement or Response should be sent back very fast. Once any message received, Acknowledgement should be sent back to TP. Oracle B2B provides a solution to send acknowledgement or Response from transport layer of mllp that is called as immediate acknowledgment. Immediate acknowledgment is generated and transmitted in the transport layer. It is an alternative to the functional acknowledgment, which generates after processing/validating the data in document layer. Oracle B2B provides four types of immediate acknowledgment: Default: Oracle B2B parses the incoming HL7 message and generates an acknowledgment from it. This mode uses the details from incoming payload and generate the acknowledgement based on incoming HL7 message control number, sender and application identification. By default, an Immediate ACK is a generic ACK. Trigger event can also sent back by using Map Trigger Event property. If mapping the MSH.10 of the ACK with the MSH.10 of the incoming business message is required, then enable the Map ACK Control ID property. Simple: B2B sends the predefined acknowledgment message to the sender without parsing the incoming message. Custom: Custom immediate Ack/Response mode gives a user to define their own response/acknowledgement. This is configurable using file in the Custom Immediate ACK File property. Negative: In this case, immediate ACK will be returned only in the case of exceptions.

Read the article
Tomcat still running after uninstalling

- by Rohit Jain

I installed tomcat7 using the following command: sudo apt-get install tomcat7 Then to uninstall it, I used below command: sudo dpkg -l|grep tomcat This listed all the packages related to tomcat. Then I removed tomcat7: sudo dpkg -P tomcat7 After that, I saw that, some related package were still there, and surprisingly I was still able to access the tomcat home page at - http://localhost:8080. So, I tried to remove it using the following command: sudo apt-get remove tomcat7 sudo apt-get autoremove But, still I was able to access the tomcat home page. So I re-booted my PC, thinking that the effect will take effect after that. But again, I'm still able to access the homepage. That means that tomcat is still running on my PC. What's going on here? Have I followed the steps correctly to uninstall tomcat. I want to uninstall to re-install a private instance of tomcat. I found out that the directory - /usr/share/tomcat7, is still there: /usr/share/tomcat7$ ls conf log webapps Is it something to do with the uninstallation?

Read the article
How to Create image grid view gallery and on click show description by particular image?

- by Priya jain

I am Getting stuck on j-query issue i am new to it please help me! I have a image gallery like: Now i want a div to be open when i click on open link and view full description of respective image. My html code is: <ul class="thumb-pic"> <li class="box_small"> <div class="director-detail"> <div align="right"><a href="#" class="open_div">Open</a><a href="#" class="close_div">Close</a></div> <div class="director-name">David MacLeod Dip OHS</div> <div class="director-position"> Director</div> </div> <img src="images/pic1.jpg" alt="pic"> </li> <li class="large_box"> <div align="right"><a href="#" class="open_div">Open</a><a href="#" class="close_div">Close</a></div> <img src="images/pic1.jpg" alt="pic" class="small_img"> <div class="desc"> <div class="director-name">David MacLeod Dip OHS</div> <div class="director-position"> Director</div> <p>All Macil staff are true specialists in their chosen fields and bring a unique set of skills and expertise and a desire to work in the investigation industry. Macil aims to provide a work environment that is empowering, inspiring and motivational</p> </div> </li> <li class="box_small"> <div class="director-detail"> <div align="right"><a href="#" class="open_div">Open</a><a href="#" class="close_div">Close</a></div> <div class="director-name">David MacLeod Dip OHS</div> <div class="director-position"> Director</div> </div> <img src="images/pic2.jpg" alt="pic"> </li> <li class="large_box"> <div align="right"><a href="#" class="open_div">Open</a><a href="#" class="close_div">Close</a></div> <img src="images/pic2.jpg" alt="pic" class="small_img"> <div class="desc"> <div class="director-name">David MacLeod Dip OHS</div> <div class="director-position"> Director</div> <p>All Macil staff are true specialists in their chosen fields and bring a unique set of skills and expertise and a desire to work in the investigation industry. Macil aims to provide a work environment that is empowering, inspiring and motivational</p> </div> </li> <li class="box_small"> <div class="director-detail"> <div align="right"><a href="#" class="open_div">Open</a><a href="#" class="close_div">Close</a></div> <div class="director-name">David MacLeod Dip OHS</div> <div class="director-position"> Director</div> </div> <img src="images/pic3.jpg" alt="pic"> </li> <li class="large_box"> <div align="right"><a href="#" class="open_div">Open</a><a href="#" class="close_div">Close</a></div> <img src="images/pic3.jpg" alt="pic" class="small_img"> <div class="desc"> <div class="director-name">David MacLeod Dip OHS</div> <div class="director-position"> Director</div> <p>All Macil staff are true specialists in their chosen fields and bring a unique set of skills and expertise and a desire to work in the investigation industry. Macil aims to provide a work environment that is empowering, inspiring and motivational</p> </div> </li> </ul> And Jquery code that i am using: <script type="text/javascript"> $(function() { $('#st-accordion').accordion({ oneOpenedItem : true }); }); $(document).ready(function(){ $('.open_div').click(function(){ $('.large_box').show(); $(this).prev('li .box_small').hide(); }); $('.close_div').click(function(){ $('.large_box').hide(); $('.box_small').show(); }); }); </script> I am new to jquery Please help me or give me some direction to achieve the solution.

Read the article
HTTP Basic Auth Protected Services using Web Service Data Control

- by vishal.s.jain(at)oracle.com

With Oracle JDeveloper 11g (11.1.1.4.0) one can now create Web Service Data Control for services which are protected with HTTP Basic Authentication.So when you provide such a service to the Data Control Wizard, a dialog pops up prompting you to entry the authentication details:After you give the details, you can proceed with the creation of Data Control.Once the Data Control is created, you can use the WSDC Tester to quickly test the service.In this case, since the service is protected, we need to first edit the connection to provide username details:Enter the authentication details against username and password. Once done, select DataControl.dcx and using the context menu, select 'Run'. This will bring up the Tester.On the Tester, select the Service Node and using context menu pick 'Operations'. This will bring up the methods which you can test:Now you can pick a method, provide the input parameters and hit execute to see the results.

Read the article
How do I fix an overheating problem with an HP ENVY-4 ultrabook?

- by ashutosh jain

I have bought a new HP ENVY-4 ultrabook. It has an i5 processor, preinstalled windows7 and 2GB radeon graphics card. What happened was when I started using ubuntu it showed overheating. I ignored it but after a few days it burnt my laptop battery to 0% capacity. It was just one month old so I got the battery replaced for free. I tried installing linux mint but it also showed overheating. I tried fedora17 but it didn't installed fine. On windows it is running perfectly fine and it's not even heating a bit. Now anyone please suggest whats the problem with ubuntu and how can I overcome with it. I am a computer science guy so I can't work without linux and this machine is then like a waste for me.

Read the article
What are programmers made to do in spare time in jobs?

- by Shashank Jain

Well, with no prior job experience I am completely ignorant of how things happen at software companies. I want to know what programmers are made to do when there is nothing to do? Lets consider Facebook or twitter. Now it is quite improbable that Facebook people have something or other feature in mind to be implemented. So software developers are quite expected to have some time when there is nothing to do. Are they free to do anything in this?

Read the article
Database Web Service using Toplink DB Provider

- by Vishal Jain

With JDeveloper 11gR2 you can now create database based web services using JAX-WS Provider. The key differences between this and the already existing PL/SQL Web Services support is:Based on JAX-WS ProviderSupports SQL Queries for creating Web ServicesSupports Table CRUD OperationsThis is present as a new option in the New Gallery under 'Web Services'When you invoke the New Gallery option, it present you with three options to choose from:In this entry I will explain the options of creating service based on SQL queries and Table CRUD operations.SQL Query based Service When you select this option, on 'Next' page it asks you for the DB Conn details. You can also choose if you want SOAP 1.1 or 1.2 format. For this example, I will proceed with SOAP 1.1, the default option.On the Next page, you can give the SQL query. The wizard support Bind Variables, so you can parametrize your queries. Give "?" as a input parameter you want to give at runtime, and the "Bind Variables" button will get enabled. Here you can specify the name and type of the variable.Finish the wizard. Now you can test your service in Analyzer:See that the bind variable specified comes as a input parameter in the Analyzer Input Form:CRUD OperationsFor this, At Step 2 of Wizard, select the radio button "Generate Table CRUD Service Provider"At the next step, select the DB Connection and the table for which you want to generate the default set of operations:Finish the Wizard. Now, run the service in Analyzer for a quick check.See that all the basic operations are exposed:

Read the article
Oracle OpenWorld Healthcare Integration Session Highlights Challenges & Solutions

- by Nitesh Jain

In today’s session co-presented by Steve Schenks, Integration Architect from Ascension Health and Oracle’s Sundar Shenbagam and Suresh Sharma (apparently your initials must be SS to present during this session), interesting insights in many different areas including Steve’s descriptions of the challenges with their previous environment: Disparate hardware and software is an issue common across healthcare and most other industries…Larry Ellison spoke on this topic during Sundays’ keynote address. In the last part of session, Suresh is planning to go over some of the best practices and lesson learned to implement successful healthcare applications and will discuss the different options to model Sequencing (FIF0) use cases (one of most common use cases in the provider market). The session was “Implementing Successful Healthcare Applications with Oracle SOA Suite” – Session # CON8546. For more information about this session, please contact Senior Principal Product Manager Suresh Sharma Ref : https://blogs.oracle.com/SOA/entry/oracle_openworld_healthcare_integration_session

Read the article
SOA Suite HealthCare Integration Architecture

- by Nitesh Jain

Oracle SOA Suite for HealthCare integration is an integrated, best-of-breed suite that helps HealthCare organizations rapidly design and assemble, deploy and manage, highly agile and adaptable business applications.It will help healthcare industry to reduce operating costs and speeds time-to-market by delivering a consistent user interface, management console and monitoring environment, as well as healthcare libraries and templates for healthcare customer projects.Oracle SOA Suite for healthcare integration is fully configurable and extensible, providing a highly flexible platform for collaboration across all healthcare domains.Healthcare message standards support: Messaging standards - HL7, HIPAA, Custom , X12N Exchange standards - MLLP (v1.0, v2.0), TCP/IP, File, FTP, SFTP, JMSSimplified dashboards and customized reports helps users to advanced monitoring capabilities that support end-to-end healthcare message tracking.A toolkit for rapid HIPAA 5010 upgrade and compliance provides pre-defined healthcare integration mapping for HIPAA standards that is fully customizable and extensible.MLLP-HA helps easily failover and disaster recovery which makes system running on the long time without any issue.Audit keeps track of all the system changes. Alert and notification (SMS,Email etc) helps user to take the fast action and gives tracking on the real-time.

Read the article
C-panel mail goes into spam instead of inbox in gmail

- by Robin Jain

I have c-panel vps server. I have created a domain on the same server, but when I send mail through webmail to gmail email id it goes into the spam folder. Note--->Mail ip note blacklisted Spf records enable DKIM enable reverse dns are perfect ====================================================================== Email header Information: Delivered-To: [email protected] Received: by 10.143.93.13 with SMTP id v13csp119806wfl; Fri, 6 Jul 2012 08:01:36 -0700 (PDT) Received: by 10.182.52.42 with SMTP id q10mr26133912obo.46.1341586895571; Fri, 06 Jul 2012 08:01:35 -0700 (PDT) Return-Path: <[email protected]> Received: from lakshyacs-u.securehostdns.com ([50.97.147.134]) by mx.google.com with ESMTPS id fx3si18028369obc.144.2012.07.06.08.01.35 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 06 Jul 2012 08:01:35 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 50.97.147.134 as permitted sender) client-ip=50.97.147.134; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 50.97.147.134 as permitted sender) [email protected] Received: from localhost.localdomain ([127.0.0.1]:39016 helo=harishjoshico.com) by lakshyacs-u.securehostdns.com with esmtpa (Exim 4.77) (envelope-from <[email protected]>) id 1SnA2J-0006Nq-05 for [email protected]; Fri, 06 Jul 2012 20:31:35 +0530 Received: from 223.189.14.213 ([223.189.14.213]) (SquirrelMail authenticated user [email protected]) by harishjoshico.com with HTTP; Fri, 6 Jul 2012 20:31:35 +0530 Message-ID: <[email protected]> Date: Fri, 6 Jul 2012 20:31:35 +0530 Subject: ggglkhl From: [email protected] To: [email protected] User-Agent: SquirrelMail/1.4.22 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - lakshyacs-u.securehostdns.com X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - harishjoshico.com jhkhl ================================================================

Read the article
Web services, J2EE, Spring, DB integration project ideas - maybe data mining related?

- by saral jain

I am a graduate Computer Science student (Data Mining and Machine Learning) and have good exposure to core Java (3 years). I have read up on a bunch of stuff on the following topics: Design patterns, J2EE Web services (SOAP and REST), Spring, and Hibernate Java Concurrency - advanced features like Task and Executors. I would now like to do a project combining this stuff -- over my free time of course -- to get a better understanding of these things and to kind of make an end to end software (to learn the best design principles etc + SVN, maven). Any good project ideas would be really appreciated. I just want to build this stuff to learn, so I don't really mind re-inventing the wheel. Also, anything related to data mining would be an added bonus as it fits with my research but is absolutely not necessary since this project is more to learn to do large scale software development.

Read the article

1 2 3 4 5 6 | Next Page >