Search Results

Search found 89616 results on 3585 pages for 'working set'.

Page 1/3585 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Allowing connections initiated from outside

  - by Mark S. Rasmussen

  I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  Read the article

• Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  - by Mark S. Rasmussen

  As we've been having some problems with sporadic packet loss, I've been preparing a replacement router (also an SSG5) for our current Juniper SSG5. I've setup the new SSG5 identically to the old one. We have a /29 IP range with a single IP setup as a MIP map to a server and two others being used for VIP maps. Each VIP/MIP is accompanied by relevant policies. Long story short - we tried connected the new SSG5 and some things were not working as they should. No problem, I just reconnected the old one. However, some things are still broken, even when I reconnected the old one. I fear I may have inadvertently changed some settings while browsing through old settings in my attempt to reconfigure the new SSG5 unit. All inbound traffic seems to work as expected. However, the 192.168.2.202 server can't initiate any outbound connections. It works perfectly on the local network, but any pings or DNS lookups to external IP's fail. The MIP & VIP map to it works perfectly - I can access it through HTTP and RDP without issues. Any tips on what to debug, or where I've messed up my config? I've attached the full config here (with anonymized IPs): set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin auth timeout 10 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "DMZ" tcp-rst set zone "VLAN" block unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 212.242.193.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 212.242.193.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 212.242.193.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 212.242.193.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname iplan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname nzlan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 212.242.193.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set pak-poll p1queue pak-threshold 96 set pak-poll p2queue pak-threshold 32 set flow tcp-mss unset flow tcp-syn-check set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set ike respond-bad-spi 1 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit traffic set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "HTTP" permit traffic priority 0 set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(212.242.193.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• dbus dependency with yum

  - by Hengjie

  Whenever, I try and run yum update I get the following error: [root@server ~]# yum update Loaded plugins: dellsysid, fastestmirror Loading mirror speeds from cached hostfile * base: mirror01.idc.hinet.net * extras: mirror01.idc.hinet.net * rpmforge: fr2.rpmfind.net * updates: mirror01.idc.hinet.net Excluding Packages in global exclude list Finished Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package NetworkManager.x86_64 1:0.7.0-13.el5 set to be updated ---> Package NetworkManager-glib.x86_64 1:0.7.0-13.el5 set to be updated ---> Package SysVinit.x86_64 0:2.86-17.el5 set to be updated ---> Package acl.x86_64 0:2.2.39-8.el5 set to be updated ---> Package acpid.x86_64 0:1.0.4-12.el5 set to be updated ---> Package apr.x86_64 0:1.2.7-11.el5_6.5 set to be updated ---> Package aspell.x86_64 12:0.60.3-12 set to be updated ---> Package audit.x86_64 0:1.8-2.el5 set to be updated ---> Package audit-libs.x86_64 0:1.8-2.el5 set to be updated ---> Package audit-libs-python.x86_64 0:1.8-2.el5 set to be updated ---> Package authconfig.x86_64 0:5.3.21-7.el5 set to be updated ---> Package autofs.x86_64 1:5.0.1-0.rc2.163.el5 set to be updated ---> Package bash.x86_64 0:3.2-32.el5 set to be updated ---> Package bind.x86_64 30:9.3.6-20.P1.el5 set to be updated ---> Package bind-libs.x86_64 30:9.3.6-20.P1.el5 set to be updated ---> Package bind-utils.x86_64 30:9.3.6-20.P1.el5 set to be updated ---> Package binutils.x86_64 0:2.17.50.0.6-20.el5 set to be updated ---> Package centos-release.x86_64 10:5-8.el5.centos set to be updated ---> Package centos-release-notes.x86_64 0:5.8-0 set to be updated ---> Package coreutils.x86_64 0:5.97-34.el5_8.1 set to be updated ---> Package cpp.x86_64 0:4.1.2-52.el5 set to be updated ---> Package cpuspeed.x86_64 1:1.2.1-10.el5 set to be updated ---> Package crash.x86_64 0:5.1.8-1.el5.centos set to be updated ---> Package cryptsetup-luks.x86_64 0:1.0.3-8.el5 set to be updated ---> Package cups.x86_64 1:1.3.7-30.el5 set to be updated ---> Package cups-libs.x86_64 1:1.3.7-30.el5 set to be updated ---> Package curl.x86_64 0:7.15.5-15.el5 set to be updated --> Processing Dependency: dbus = 1.1.2-15.el5_6 for package: dbus-libs ---> Package dbus.x86_64 0:1.1.2-16.el5_7 set to be updated ---> Package dbus-libs.x86_64 0:1.1.2-16.el5_7 set to be updated ---> Package device-mapper.x86_64 0:1.02.67-2.el5 set to be updated ---> Package device-mapper-event.x86_64 0:1.02.67-2.el5 set to be updated ---> Package device-mapper-multipath.x86_64 0:0.4.7-48.el5_8.1 set to be updated ---> Package dhclient.x86_64 12:3.0.5-31.el5 set to be updated ---> Package dmidecode.x86_64 1:2.11-1.el5 set to be updated ---> Package dmraid.x86_64 0:1.0.0.rc13-65.el5 set to be updated ---> Package dmraid-events.x86_64 0:1.0.0.rc13-65.el5 set to be updated ---> Package dump.x86_64 0:0.4b41-6.el5 set to be updated ---> Package e2fsprogs.x86_64 0:1.39-33.el5 set to be updated ---> Package e2fsprogs-devel.x86_64 0:1.39-33.el5 set to be updated ---> Package e2fsprogs-libs.x86_64 0:1.39-33.el5 set to be updated ---> Package ecryptfs-utils.x86_64 0:75-8.el5 set to be updated ---> Package file.x86_64 0:4.17-21 set to be updated ---> Package finger.x86_64 0:0.17-33 set to be updated ---> Package firstboot-tui.x86_64 0:1.4.27.9-1.el5.centos set to be updated ---> Package freetype.x86_64 0:2.2.1-28.el5_7.2 set to be updated ---> Package freetype-devel.x86_64 0:2.2.1-28.el5_7.2 set to be updated ---> Package ftp.x86_64 0:0.17-37.el5 set to be updated ---> Package gamin.x86_64 0:0.1.7-10.el5 set to be updated ---> Package gamin-python.x86_64 0:0.1.7-10.el5 set to be updated ---> Package gawk.x86_64 0:3.1.5-15.el5 set to be updated ---> Package gcc.x86_64 0:4.1.2-52.el5 set to be updated ---> Package gcc-c++.x86_64 0:4.1.2-52.el5 set to be updated ---> Package glibc.i686 0:2.5-81.el5_8.1 set to be updated ---> Package glibc.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package glibc-common.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package glibc-devel.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package glibc-headers.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package gnutls.x86_64 0:1.4.1-7.el5_8.2 set to be updated ---> Package groff.x86_64 0:1.18.1.1-13.el5 set to be updated ---> Package gtk2.x86_64 0:2.10.4-21.el5_7.7 set to be updated ---> Package gzip.x86_64 0:1.3.5-13.el5.centos set to be updated ---> Package hmaccalc.x86_64 0:0.9.6-4.el5 set to be updated ---> Package htop.x86_64 0:1.0.1-2.el5.rf set to be updated ---> Package hwdata.noarch 0:0.213.26-1.el5 set to be updated ---> Package ifd-egate.x86_64 0:0.05-17.el5 set to be updated ---> Package initscripts.x86_64 0:8.45.42-1.el5.centos set to be updated ---> Package iproute.x86_64 0:2.6.18-13.el5 set to be updated ---> Package iptables.x86_64 0:1.3.5-9.1.el5 set to be updated ---> Package iptables-ipv6.x86_64 0:1.3.5-9.1.el5 set to be updated ---> Package iscsi-initiator-utils.x86_64 0:6.2.0.872-13.el5 set to be updated ---> Package kernel.x86_64 0:2.6.18-308.1.1.el5 set to be installed ---> Package kernel-headers.x86_64 0:2.6.18-308.1.1.el5 set to be updated ---> Package kpartx.x86_64 0:0.4.7-48.el5_8.1 set to be updated ---> Package krb5-devel.x86_64 0:1.6.1-70.el5 set to be updated ---> Package krb5-libs.x86_64 0:1.6.1-70.el5 set to be updated ---> Package krb5-workstation.x86_64 0:1.6.1-70.el5 set to be updated ---> Package ksh.x86_64 0:20100621-5.el5_8.1 set to be updated ---> Package kudzu.x86_64 0:1.2.57.1.26-3.el5.centos set to be updated ---> Package less.x86_64 0:436-9.el5 set to be updated ---> Package lftp.x86_64 0:3.7.11-7.el5 set to be updated ---> Package libX11.x86_64 0:1.0.3-11.el5_7.1 set to be updated ---> Package libX11-devel.x86_64 0:1.0.3-11.el5_7.1 set to be updated ---> Package libXcursor.x86_64 0:1.1.7-1.2 set to be updated ---> Package libacl.x86_64 0:2.2.39-8.el5 set to be updated ---> Package libgcc.x86_64 0:4.1.2-52.el5 set to be updated ---> Package libgomp.x86_64 0:4.4.6-3.el5.1 set to be updated ---> Package libpng.x86_64 2:1.2.10-16.el5_8 set to be updated ---> Package libpng-devel.x86_64 2:1.2.10-16.el5_8 set to be updated ---> Package libsmbios.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package libstdc++.x86_64 0:4.1.2-52.el5 set to be updated ---> Package libstdc++-devel.x86_64 0:4.1.2-52.el5 set to be updated ---> Package libsysfs.x86_64 0:2.1.0-1.el5 set to be updated ---> Package libusb.x86_64 0:0.1.12-6.el5 set to be updated ---> Package libvolume_id.x86_64 0:095-14.27.el5_7.1 set to be updated ---> Package libxml2.x86_64 0:2.6.26-2.1.15.el5_8.2 set to be updated ---> Package libxml2-python.x86_64 0:2.6.26-2.1.15.el5_8.2 set to be updated ---> Package logrotate.x86_64 0:3.7.4-12 set to be updated ---> Package lsof.x86_64 0:4.78-6 set to be updated ---> Package lvm2.x86_64 0:2.02.88-7.el5 set to be updated ---> Package m2crypto.x86_64 0:0.16-8.el5 set to be updated ---> Package man.x86_64 0:1.6d-2.el5 set to be updated ---> Package man-pages.noarch 0:2.39-20.el5 set to be updated ---> Package mcelog.x86_64 1:0.9pre-1.32.el5 set to be updated ---> Package mesa-libGL.x86_64 0:6.5.1-7.10.el5 set to be updated ---> Package mesa-libGL-devel.x86_64 0:6.5.1-7.10.el5 set to be updated ---> Package microcode_ctl.x86_64 2:1.17-1.56.el5 set to be updated ---> Package mkinitrd.x86_64 0:5.1.19.6-75.el5 set to be updated ---> Package mktemp.x86_64 3:1.5-24.el5 set to be updated --> Processing Dependency: nash = 5.1.19.6-68.el5_6.1 for package: mkinitrd ---> Package nash.x86_64 0:5.1.19.6-75.el5 set to be updated ---> Package net-snmp.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-snmp-devel.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-snmp-libs.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-snmp-utils.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-tools.x86_64 0:1.60-82.el5 set to be updated ---> Package nfs-utils.x86_64 1:1.0.9-60.el5 set to be updated ---> Package nfs-utils-lib.x86_64 0:1.0.8-7.9.el5 set to be updated ---> Package nscd.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package nspr.x86_64 0:4.8.9-1.el5_8 set to be updated ---> Package nspr-devel.x86_64 0:4.8.9-1.el5_8 set to be updated ---> Package nss.x86_64 0:3.13.1-5.el5_8 set to be updated ---> Package nss-devel.x86_64 0:3.13.1-5.el5_8 set to be updated ---> Package nss-tools.x86_64 0:3.13.1-5.el5_8 set to be updated ---> Package nss_ldap.x86_64 0:253-49.el5 set to be updated ---> Package ntp.x86_64 0:4.2.2p1-15.el5.centos.1 set to be updated ---> Package numactl.x86_64 0:0.9.8-12.el5_6 set to be updated ---> Package oddjob.x86_64 0:0.27-12.el5 set to be updated ---> Package oddjob-libs.x86_64 0:0.27-12.el5 set to be updated ---> Package openldap.x86_64 0:2.3.43-25.el5 set to be updated ---> Package openssh.x86_64 0:4.3p2-82.el5 set to be updated ---> Package openssh-clients.x86_64 0:4.3p2-82.el5 set to be updated ---> Package openssh-server.x86_64 0:4.3p2-82.el5 set to be updated ---> Package openssl.i686 0:0.9.8e-22.el5_8.1 set to be updated ---> Package openssl.x86_64 0:0.9.8e-22.el5_8.1 set to be updated ---> Package openssl-devel.x86_64 0:0.9.8e-22.el5_8.1 set to be updated ---> Package pam_krb5.x86_64 0:2.2.14-22.el5 set to be updated ---> Package pam_pkcs11.x86_64 0:0.5.3-26.el5 set to be updated ---> Package pango.x86_64 0:1.14.9-8.el5.centos.3 set to be updated ---> Package parted.x86_64 0:1.8.1-29.el5 set to be updated ---> Package pciutils.x86_64 0:3.1.7-5.el5 set to be updated ---> Package perl.x86_64 4:5.8.8-38.el5 set to be updated ---> Package perl-Compress-Raw-Bzip2.x86_64 0:2.037-1.el5.rf set to be updated ---> Package perl-Compress-Raw-Zlib.x86_64 0:2.037-1.el5.rf set to be updated ---> Package perl-rrdtool.x86_64 0:1.4.7-1.el5.rf set to be updated ---> Package poppler.x86_64 0:0.5.4-19.el5 set to be updated ---> Package poppler-utils.x86_64 0:0.5.4-19.el5 set to be updated ---> Package popt.x86_64 0:1.10.2.3-28.el5_8 set to be updated ---> Package postgresql-libs.x86_64 0:8.1.23-1.el5_7.3 set to be updated ---> Package procps.x86_64 0:3.2.7-18.el5 set to be updated ---> Package proftpd.x86_64 0:1.3.4a-1.el5.rf set to be updated --> Processing Dependency: perl(Mail::Sendmail) for package: proftpd ---> Package python.x86_64 0:2.4.3-46.el5 set to be updated ---> Package python-ctypes.x86_64 0:1.0.2-3.el5 set to be updated ---> Package python-libs.x86_64 0:2.4.3-46.el5 set to be updated ---> Package python-smbios.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package rhpl.x86_64 0:0.194.1-2 set to be updated ---> Package rmt.x86_64 0:0.4b41-6.el5 set to be updated ---> Package rng-utils.x86_64 1:2.0-5.el5 set to be updated ---> Package rpm.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-build.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-devel.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-libs.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-python.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rrdtool.x86_64 0:1.4.7-1.el5.rf set to be updated ---> Package rsh.x86_64 0:0.17-40.el5_7.1 set to be updated ---> Package rsync.x86_64 0:3.0.6-4.el5_7.1 set to be updated ---> Package ruby.x86_64 0:1.8.5-24.el5 set to be updated ---> Package ruby-libs.x86_64 0:1.8.5-24.el5 set to be updated ---> Package sblim-sfcb.x86_64 0:1.3.11-49.el5 set to be updated ---> Package sblim-sfcc.x86_64 0:2.2.2-49.el5 set to be updated ---> Package selinux-policy.noarch 0:2.4.6-327.el5 set to be updated ---> Package selinux-policy-targeted.noarch 0:2.4.6-327.el5 set to be updated ---> Package setup.noarch 0:2.5.58-9.el5 set to be updated ---> Package shadow-utils.x86_64 2:4.0.17-20.el5 set to be updated ---> Package smartmontools.x86_64 1:5.38-3.el5 set to be updated ---> Package smbios-utils-bin.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package smbios-utils-python.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package sos.noarch 0:1.7-9.62.el5 set to be updated ---> Package srvadmin-omilcore.x86_64 0:6.5.0-1.452.1.el5 set to be updated ---> Package strace.x86_64 0:4.5.18-11.el5_8 set to be updated ---> Package subversion.x86_64 0:1.6.11-7.el5_6.4 set to be updated ---> Package sudo.x86_64 0:1.7.2p1-13.el5 set to be updated ---> Package sysfsutils.x86_64 0:2.1.0-1.el5 set to be updated ---> Package syslinux.x86_64 0:3.11-7 set to be updated ---> Package system-config-network-tui.noarch 0:1.3.99.21-1.el5 set to be updated ---> Package talk.x86_64 0:0.17-31.el5 set to be updated ---> Package tar.x86_64 2:1.15.1-31.el5 set to be updated ---> Package traceroute.x86_64 3:2.0.1-6.el5 set to be updated ---> Package tzdata.x86_64 0:2012b-3.el5 set to be updated ---> Package udev.x86_64 0:095-14.27.el5_7.1 set to be updated ---> Package util-linux.x86_64 0:2.13-0.59.el5 set to be updated ---> Package vixie-cron.x86_64 4:4.1-81.el5 set to be updated ---> Package wget.x86_64 0:1.11.4-3.el5_8.1 set to be updated ---> Package xinetd.x86_64 2:2.3.14-16.el5 set to be updated ---> Package yp-tools.x86_64 0:2.9-2.el5 set to be updated ---> Package ypbind.x86_64 3:1.19-12.el5_6.1 set to be updated ---> Package yum.noarch 0:3.2.22-39.el5.centos set to be updated ---> Package yum-dellsysid.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package yum-fastestmirror.noarch 0:1.1.16-21.el5.centos set to be updated ---> Package zlib.x86_64 0:1.2.3-4.el5 set to be updated ---> Package zlib-devel.x86_64 0:1.2.3-4.el5 set to be updated --> Running transaction check --> Processing Dependency: dbus = 1.1.2-15.el5_6 for package: dbus-libs --> Processing Dependency: nash = 5.1.19.6-68.el5_6.1 for package: mkinitrd ---> Package perl-Mail-Sendmail.noarch 0:0.79-1.2.el5.rf set to be updated base/filelists | 3.5 MB 00:00 dell-omsa-indep/filelists | 195 kB 00:01 dell-omsa-specific/filelists | 1.0 kB 00:00 extras/filelists_db | 224 kB 00:00 rpmforge/filelists | 4.8 MB 00:06 updates/filelists_db | 715 kB 00:00 --> Finished Dependency Resolution dbus-libs-1.1.2-15.el5_6.i386 from installed has depsolving problems --> Missing Dependency: dbus = 1.1.2-15.el5_6 is needed by package dbus-libs-1.1.2-15.el5_6.i386 (installed) mkinitrd-5.1.19.6-68.el5_6.1.i386 from installed has depsolving problems --> Missing Dependency: nash = 5.1.19.6-68.el5_6.1 is needed by package mkinitrd-5.1.19.6-68.el5_6.1.i386 (installed) Error: Missing Dependency: nash = 5.1.19.6-68.el5_6.1 is needed by package mkinitrd-5.1.19.6-68.el5_6.1.i386 (installed) Error: Missing Dependency: dbus = 1.1.2-15.el5_6 is needed by package dbus-libs-1.1.2-15.el5_6.i386 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. I have tried running package-cleanup --dupes and package-cleanup --problems but to no avail.

  Read the article

• Getting started with Document Set in SharePoint2010

  - by ybbest

  Folders are widely used in traditional file based system, in SharePoint world you can create folder in the document library as well. However, there is a new improved feature in SharePoint called Document Set; you can attach metadata to the document set. To get start with Document set, you can perforce the following steps. 1. Go to Site Settings >>Site collection features >>Activate the Document Sets feature. 2. After the Document Sets feature is activated, you will get a new content type called Document Set. 3. Next, we can create a custom content type called Loan Application Document Set that inherited from Document Set Content Type. 4. Then I create a new column called Application Number. 5. Add this field to the loan application content type 6. Create a new Content Type called Loan Contract form that inherited from Document content type. 7. Add the Application Number to the Loan Contract form content type. 8. Create a new Content Type called Loan Application form that inherited from Document content type and add Application Number to it.(The same step as above.) 9.Go to the Loan Application Document Set content type and go to the Document Set Settings. 10. You can define which content type you would like this Document set contains and you can also define the default document for each content type. When you create a new document set, those default documents will get automatically created in the document set. You can also define the Shared field that shared across content types; in my case I define the Application number and description as my shared fields. Finally, you can define the fields that you’d like to show in the document set welcome page. 11. Now create a new document library and attach those content types to the document library and create a new loan application document set. 12. You will see the default document created in the document set.If you updated Application Number on the document set , the field will get updated in the documents inside the document set as well.

  Read the article

• SVN Working Copy to Different Branch Merge Without Commit to Working Copy Branch

  - by Q Boiler

  If a working copy (local copy) was created from a branch, lets call it A. Coding was done in branch A, but branch A was "Closed" to commits, and branch b was opened. How do I merge my working copy changes into Branch B and commit to branch B, without commiting my changes to branch A first. Trunk - branch A. I checked out branch A and made changes. Branch A was closed to commits. New Branch created from branch A. branch A - branch B. I would like to commit my working copy changes (currently pointing at Branch A into branch B without commiting to Branch A)

  Read the article

• append set to another set

  - by mr.bio

  Hi Is there a better way of appending a set to another set than iterating through each element ? i have : set<string> foo ; set<string> bar ; ..... for (set<string>::const_iterator p = foo.begin( );p != foo.end( ); ++p) bar.insert(*p); Is there a more efficient way to do this ?

  Read the article

• How to deploy Document Set using CAML in SharePoint2010 solution package

  - by ybbest

  In my last post, I showed you how to use Document Set using SharePoint UI in the browser. In this post, I’d like to show you how to create the same Document Set using CAML and SharePoint solution package. You can download the complete solution here. 1. Create the Application Number site column using the SharePoint empty element item template in VS2010 <?xml version="1.0" encoding="utf-8"?> <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <Field Type="Text" DisplayName="ApplicationNumber" Required="FALSE" EnforceUniqueValues="FALSE" Indexed="FALSE" MaxLength="255" Group="YBBEST" ID="{916bf3af-5ec1-4441-acd8-88ff62ab1b7e}" Name="ApplicationNumber" ></Field> </Elements> 2. Create the Loan Application Form and Loan Contract Form content types. <?xml version="1.0" encoding="utf-8"?> <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <!-- Parent ContentType: Document (0x0101) --> <ContentType ID="0x0101005dfbf820ce3c49f69c73a00e0e0e53f6" Name="Loan Contract Form" Group="YBBEST" Description="Loan Contract Form" Inherits="TRUE" Version="0"> <FieldRefs> <FieldRef ID="916bf3af-5ec1-4441-acd8-88ff62ab1b7e" Name="ApplicationNumber" DisplayName="ApplicationNumber" /> </FieldRefs> </ContentType> <!-- Parent ContentType: Document (0x0101) --> <ContentType ID="0x010100f3016e3d03454b93bc4d6ab63941c0d2" Name="Loan Application Form" Group="YBBEST" Description="Loan Application Form" Inherits="TRUE" Version="0"> <FieldRefs> <FieldRef ID="916bf3af-5ec1-4441-acd8-88ff62ab1b7e" Name="ApplicationNumber" DisplayName="ApplicationNumber" /> </FieldRefs> </ContentType> </Elements> 3. Create the Loan Application Document Set. 4. Create the Document Set Welcome Page using the SharePoint Module item template. Notes: 1.When creating document set content type , you need to set the  Inherits=”FALSE”  or remove the  Inherits=”TRUE” from the content type definition (default is  Inherits=”FALSE”) . This is the Document Set limitation in the current version of SharePoint2010. Because of this , you also need to manually  attach the event receiver and  Document Set welcome page to your custom Document Set Content Type. 2. Shared Fields are push down only: 3. Not available in SharePoint foundation (only SharePoint Server 2010). 4. You can’t have folders within document sets (you can place document sets in folders though). For a complete limitation and considerations , you can see the references for details. References: Document Set Limitations and Considerations in SharePoint 2010 1 Document Set Limitations and Considerations in SharePoint 2010 2 Document Sets planning (SharePoint Server 2010) Import Document Sets Issue http://msdn.microsoft.com/en-us/library/gg581064.aspx http://channel9.msdn.com/Events/TechEd/NorthAmerica/2010/OSP305 DocumentSet Class

  Read the article

• How to deploy Document Set using CAML in SharePoint2010 solution package

  - by ybbest

  In my last post, I showed you how to use Document Set using SharePoint UI in the browser. In this post, I’d like to show you how to create the same Document Set using CAML and SharePoint solution package. You can download the complete solution here. 1. Create the Application Number site column using the SharePoint empty element item template in VS2010 <?xml version="1.0" encoding="utf-8"?> <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <Field Type="Text" DisplayName="ApplicationNumber" Required="FALSE" EnforceUniqueValues="FALSE" Indexed="FALSE" MaxLength="255" Group="YBBEST" ID="{916bf3af-5ec1-4441-acd8-88ff62ab1b7e}" Name="ApplicationNumber" ></Field> </Elements> 2. Create the Loan Application Form and Loan Contract Form content types. <?xml version="1.0" encoding="utf-8"?> <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <!-- Parent ContentType: Document (0x0101) --> <ContentType ID="0x0101005dfbf820ce3c49f69c73a00e0e0e53f6" Name="Loan Contract Form" Group="YBBEST" Description="Loan Contract Form" Inherits="TRUE" Version="0"> <FieldRefs> <FieldRef ID="916bf3af-5ec1-4441-acd8-88ff62ab1b7e" Name="ApplicationNumber" DisplayName="ApplicationNumber" /> </FieldRefs> </ContentType> <!-- Parent ContentType: Document (0x0101) --> <ContentType ID="0x010100f3016e3d03454b93bc4d6ab63941c0d2" Name="Loan Application Form" Group="YBBEST" Description="Loan Application Form" Inherits="TRUE" Version="0"> <FieldRefs> <FieldRef ID="916bf3af-5ec1-4441-acd8-88ff62ab1b7e" Name="ApplicationNumber" DisplayName="ApplicationNumber" /> </FieldRefs> </ContentType> </Elements> 3. Create the Loan Application Document Set. 4. Create the Document Set Welcome Page using the SharePoint Module item template. Notes: 1.When creating document set content type , you need to set the  Inherits=”FALSE”  or remove the  Inherits=”TRUE” from the content type definition (default is  Inherits=”FALSE”) . This is the Document Set limitation in the current version of SharePoint2010. Because of this , you also need to manually  attach the event receiver and  Document Set welcome page to your custom Document Set Content Type. 2. Shared Fields are push down only: 3. Not available in SharePoint foundation (only SharePoint Server 2010). 4. You can’t have folders within document sets (you can place document sets in folders though). For a complete limitation and considerations , you can see the references for details. References: Document Set Limitations and Considerations in SharePoint 2010 1 Document Set Limitations and Considerations in SharePoint 2010 2 Document Sets planning (SharePoint Server 2010) Import Document Sets Issue http://msdn.microsoft.com/en-us/library/gg581064.aspx http://channel9.msdn.com/Events/TechEd/NorthAmerica/2010/OSP305 DocumentSet Class

  Read the article

• How should developers handle subpar working conditions? [closed]

  - by ivar

  I have been working in my current job for less than a year and at the beginning didn't have the courage to say anything about the things that bothered me. Now I'm a bit fed up and need things to get better. The first problem is not random but I'll mention it anyway. We are running out of space so every new employee gets a smaller table. We are promised that the space problem will be fixed soon. Almost every employee has a different keyboard, mouse, headphones (if any). Mine are $10 keyboard, some random cheap mouse and some random crappy headphones with a mic. All these were used and dirty when I got them. The number of monitor is 1-3 and with different sizes. I have 2 nice monitors and can't complain but some are given 1 small monitor. When it's their first job they don't have the guts to ask for 2 even if most others have 2. Nobody seems to care too. Project manager asked if it's ok? He obviously said he can handle the 1 small one. Then the manager said you can go ask for 1 more. I'm watching this and think go and ask where? The company is trying to hire more people but is not doing much after the person has signed the contract. We are put in one room that is open to the hallway and it's super noisy. Almost like a zoo at times. Even if nobody is talking the crappy keyboards make too much noise. Is this normal? Am I too negative and should I just do my job with what I was given? Should I demand better things? Should the company have some system that everybody gets things in some price range?

  Read the article

• How do you get better working conditions? [closed]

  - by 0A0D

  I work at a business who has a software side and manufacturing side. The software we write is sold as a package along with other hardware that our customers purchase. I basically work in a warehouse. There is one door that seperates the engineers from the warehouse noise. I have asked for noise cancelling walls to be put in. I have asked multiple times over 6 months to be moved up front to one of two vacant sales offices, but they seem reluctant to let an Engineer move into a sales office. In fact, sales are the only ones with windows and they get commission though they make mistakes or overpromise to the customer. So, my question is how can I get better working conditions without necessarily having to leave my current job? It is very hard to work and concentrate. UPDATE I think I can finally close this chapter in my life. I have moved on to a large corporation which follows CMMI religiously and has even started using Agile in many of its projects. Nevertheless, there is organization, respect, and genuine care for the engineers and scientists that work for them. Pierre was right - quitting was the right answer. My life does not nearly have the amount of stress it used to have because I now work for a place that is organized and knows what it wants its engineers to do along with treating them like they should be treated.

  Read the article

• Expand a Set[Set[String]] into Set[String] in Scala

  - by huynhjl

  I have the following set of sets. I don't know ahead of time how long it will be. val sets = Set(Set("a","b","c"), Set("1","2"), Set("S","T")) I would like to expand it into a cartesian product: Set("a&1&S", "a&1&T", "a&2&S", ..., "c&2&T") How would you do that?

  Read the article

• Juniper SSG-5 subinterface vlan routing to the internet

  - by catfish

  I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• Set theory problem - transform one set to another

  - by mwnorman

  Given 2 sets A & B, is there an algorithm that will generate the insert/update/delete operations required to transform set A into set B?

  Read the article

• What permissions are required for SET IDENTITY_INSERT ON?

  - by AaronBertrand

  SQL Server 2000's SET IDENTITY_INSERT ON topic says: Execute permissions default to the sysadmin fixed server role, and the db_owner and db_ddladmin fixed database roles, and the object owner. While the SET IDENTITY_INSERT topic for SQL Server 2005 (and up) says: User must own the object, or be a member of the sysadmin fixed server role, or the db_owner and db_ddladmin fixed database roles. This was clearly adapted from the 2000 books online and re-written by someone who misinterpreted "db_owner...(read more)

  Read the article

• SVN: Working with branches using the same working copy

  - by uXuf

  We've just moved to SVN from CVS. We have a small team and everyone checks in code on the trunk and we have never ever used branches for development. We each have directories on a remote dev server with the codebase checked out. Each developer works on their own sandbox with an associated URL to pull up the app in a browser (something like the setup here: Trade-offs of local vs remote development workflows for a web development team). I've decided that for my current project, I'll use a branch because it would span multiple releases. I've already cut a branch out, but I am using the same directory as the one originally checked out (i.e. for the trunk). Since it's the same directory (or working copy) for both the branch and the trunk, if for e.g. a bug pops up in the app I switch to the trunk and commit the change there, and then switch back to my branch for my project development. My questions are: Is this a sane way to work with branches? Are there any pitfalls that I need to be aware of? What would be the optimal way to work with branches if separate working copies are out of the question? I haven't had issues yet as I have just started doing this way but all the tutorials/books/blog posts I have seen about branching with SVN imply working with different working copies (or perhaps I haven't come across an explanation of mixed working copies in plain English). I just don't want to be sorry three months down the road when its time to integrate the branch back to the trunk.

  Read the article

• How to create a link to Nintex Start Workflow Page in the document set home page

  - by ybbest

  In this blog post, I’d like to show you how to create a link to start Nintex Workflow Page in the document set home page. 1. Firstly, you need to upload the latest version of jQuery to the style library of your team site. 2. Then, upload a text file to the style library for writing your own html and JavaScript 3. In the document set home page, insert a new content editor web part and link the text file you just upload. 4. Update the text file with the following content, you can download this file here. <script type="text/javascript" src="/Style%20Library/jquery-1.9.0.min.js"></script> <script type="text/javascript" src="/_layouts/sp.js"></script> <script type="text/javascript"> $(document).ready(function() { listItemId=getParameterByName("ID"); setTheWorkflowLink("YBBESTDocumentLibrary"); }); function buildWorkflowLink(webRelativeUrl,listId,itemId) { var workflowLink =webRelativeUrl+"_layouts/NintexWorkflow/StartWorkflow.aspx?list="+listId+"&ID="+itemId+"&WorkflowName=Start Approval"; return workflowLink; } function getParameterByName(name) { name = name.replace(/[\[]/, "\\\[").replace(/[\]]/, "\\\]"); var regexS = "[\\?&]" + name + "=([^&#]*)"; var regex = new RegExp(regexS); var results = regex.exec(window.location.search); if(results == null){ return ""; } else{ return decodeURIComponent(results[1].replace(/\+/g, " ")); } } function setTheWorkflowLink(listName) { var SPContext = new SP.ClientContext.get_current(); web = SPContext.get_web(); list = web.get_lists().getByTitle(listName); SPContext.load(web,"ServerRelativeUrl"); SPContext.load(list, 'Title', 'Id'); SPContext.executeQueryAsync(setTheWorkflowLink_Success, setTheWorkflowLink_Fail); } function setTheWorkflowLink_Success(sender, args) { var listId = list.get_id(); var listTitle = list.get_title(); var webRelativeUrl = web.get_serverRelativeUrl(); var startWorkflowLink=buildWorkflowLink(webRelativeUrl,listId,listItemId) $("a#submitLink").attr('href',startWorkflowLink); } function setTheWorkflowLink_Fail(sender, args) { alert("There is a problem setting up the submit exam approval link"); } </script> <a href="" target="_blank" id="submitLink"><span style="font-size:14pt">Start the approval process.</span></a> 5. Save your changes and go to the document set Item, you will see the link is on the home page now. Notes: 1. You can create a link to start the workflow using the following build dynamic string configuration: {Common:WebUrl}/_layouts/NintexWorkflow/StartWorkflow.aspx?list={Common:ListID}&ID={ItemProperty:ID}&WorkflowName=workflowname. With this link you will still need to click the start button, this is standard SharePoint behaviour and cannot be altered. References: http://connect.nintex.com/forums/27143/ShowThread.aspx How to use html and JavaScript in Content Editor web part in SharePoint2010

  Read the article

• working validation hint, working word counter but not working together

  - by Sriyani Rathnayaka

  I added a word counter to a my form's textarea... it is something like this... <div> <label>About you:</label> <textarea id="qualification" class="textarea hint_needed" rows="4" cols="30" ></textarea> <span class="hint">explain about you</span> <script type="text/javascript"> $("textarea").textareaCounter(); </script> </div> My problem is when I add textaracounter() like this my validation hint is not working.. when I remover the counter function validation hint is working... this is the jquery for hint message.. $(".hint").css({ "display":"none" }); $("input.hint_needed, select.hint_needed, textarea.hint_needed, radio.hint_needed").on("mouseenter", function() { $(this).next(".hint").css({ "display":"inline" }); }).on("mouseleave", function() { $(this).next(".hint").css({ "display":"none" }); }); this is for the word counter.. (function($){ $.fn.textareaCounter = function(options) { // setting the defaults // $("textarea").textareaCounter({ limit: 100 }); var defaults = { limit: 150 }; var options = $.extend(defaults, options); // and the plugin begins return this.each(function() { var obj, text, wordcount, limited; obj = $("#experience"); obj.after('<span style="font-weight: bold; color:#6a6a6a; clear: both; margin: 3px 0 0 150px; float: left; overflow: hidden;" id="counter-text">Max. '+options.limit+' words</span>'); obj.keyup(function() { text = obj.val(); if(text === "") { wordcount = 0; } else { wordcount = $.trim(text).split(" ").length; } if(wordcount > options.limit) { $("#counter-text").html('<span style="color: #DD0000;">0 words left</span>'); limited = $.trim(text).split(" ", options.limit); limited = limited.join(" "); $(this).val(limited); } else { $("#counter-text").html((options.limit - wordcount)+' words left'); } }); }); }; })(jQuery); can anybody tell me what is the problem there? Thank you..

  Read the article

• Using SET NULL and SET DEFAULT with Foreign Key Constraints

  Cascading Updates and Deletes, introduced with SQL Server 2000, were such an important, crucial feature that it is hard to imagine providing referential integrity without them. One of the new features in SQL Server 2005 that hasn't gotten a lot of press from what I've read is the new options for the ON DELETE and ON UPDATE clauses: SET NULL and SET DEFAULT. Let's take a look!

  Read the article

• An efficient code to determine if a set is a subset of another set

  - by Edward

  I am looking for an efficient way to determine if a set is a subset of another set in Matlab or Mathematica. Example: Set A = [1 2 3 4] Set B = [4 3] Set C = [3 4 1] Set D = [4 3 2 1] The output should be: Set A Sets B and C belong to set A because A contains all of their elements, therefore, they can be deleted (the order of elements in a set doesn't matter). Set D has the same elements as set A and since set A precedes set D, I would like to simply keep set A and delete set D. So there are two essential rules: 1. Delete a set if it is a subset of another set 2. Delete a set if its elements are the same as those of a preceding set My Matlab code is not very efficient at doing this - it mostly consists of nested loops. Suggestions are very welcome! Additional explanation: the issue is that with a large number of sets there will be a very large number of pairwise comparisons.

  Read the article

• An efficient code to determine if a set is a subset of another set

  - by Edward

  I am looking for an efficient way to determine if a set is a subset of another set in Matlab or Mathematica. Example: Set A = [1 2 3 4] Set B = [4 3] Set C = [3 4 1] Set D = [4 3 2 1] The output should be: Set A Sets B and C belong to set A because A contains all of their elements, therefore, they can be deleted (the order of elements in a set doesn't matter). Set D has the same elements as set A and since set A precedes set D, I would like to simply keep set A and delete set D. So there are two essential rules: 1. Delete a set if it is a subset of another set 2. Delete a set if its elements are the same as those of a preceding set My Matlab code is not very efficient at doing this - it mostly consists of nested loops. Suggestions are very welcome! Additional explanation: the issue is that with a large number of sets there will be a very large number of pairwise comparisons.

  Read the article

• sqlplus: Running "set lines" and "set pagesize" automatially

  - by katsumii

  This is a followup to my previous entry. Using the full tty real estate with sqlplus (INOUE Katsumi @ Tokyo) 'rlwrap' is widely used for adding 'sqlplus' the history function and command line editing. Here's another but again kludgy implementation. First this is the alias. alias sqlplus="rlwrap -z ~/sqlplus.filter sqlplus" And this is the file content. #!/usr/bin/env perl use lib ($ENV{RLWRAP_FILTERDIR} or "."); use RlwrapFilter; use POSIX qw(:signal_h); use strict; my $filter = new RlwrapFilter; $filter -> prompt_handler(\&prompt); sigprocmask(SIG_UNBLOCK, POSIX::SigSet->new(28)); $SIG{WINCH} = 'winchHandler'; $filter -> run; sub winchHandler { $filter -> input_handler(\&input); sigprocmask(SIG_UNBLOCK, POSIX::SigSet->new(28)); $SIG{WINCH} = 'winchHandler'; $filter -> run; } sub input { $filter -> input_handler(undef); return `resize |sed -n "1s/COLUMNS=/set linesize /p;2s/LINES=/set pagesize /p"` . $_; } sub prompt { if ($_ =~ "SQL> ") { $filter -> input_handler(\&input); $filter -> prompt_handler(undef); } return $_; } I hope I can compare these 2 implementations after testing more and getting some feedbacks.

  Read the article

• Installed Ubuntu 14.04LTS

  - by user291729

  On my laptop which came pre-installed with Windows 8.1. Felt I needed to see the competition for myself to establish which was a better OS. So I followed the channels to dual boot. All seemed fine and I accessed Ubuntu with no issues after selecting this from the menu to select the OS. I should add that the boot method was changed to legacy. However, since using Ubuntu, I no longer have the ability to select the OS. The laptop simply logs straight into Ubuntu. I therefore attempted to access the recovery options, only it appears the Windows 8 bootloader has somehow been corrupted as I am now told to use the Windows 8 recovery disc (which, as this was pre-installed - I do not have). Left with no other alternative, I have scoured these forums without success, and so I am hoping someone in the know (or who has experienced similar) can help. I have tried boot repair again without success. On rebooting I am only presented with a basic splash screen asking me to select Ubuntu, Memtest, Windows 8 Recovery or Windows 8 Bootloader (The bootloaders again require I insert the disc). I have tried Code: cat /boot/grub/grub.cfg df -h sudo fdisk -l cat /proc/partitions # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9 84G 7.1G 73G 9% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 3.9G 4.0K 3.9G 1% /dev tmpfs 794M 1.4M 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 80K 3.9G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sdc1 7.5G 2.2G 5.4G 29% /media/john/DYLANMUSIC /dev/sr0 964M 964M 0 100% /media/john/Ubuntu 14.04 LTS amd64 /dev/sdb1 1.9T 892G 972G 48% /media/john/Storage Main WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4e2ccf75 Device Boot Start End Blocks Id System /dev/sda1 1 1953525167 976762583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 8011 MB, 8011120640 bytes 41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 15646719 7819328 b W95 FAT32 Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7d968ff Device Boot Start End Blocks Id System /dev/sdb1 64 3907029119 1953514528 7 HPFS/NTFS/exFAT major minor #blocks name 8 0 976762584 sda 8 1 266240 sda1 8 2 1509376 sda2 8 3 266240 sda3 8 4 131072 sda4 8 5 841012780 sda5 8 6 358400 sda6 8 7 35376128 sda7 8 8 1024 sda8 8 9 89501696 sda9 8 10 8337408 sda10 11 0 987136 sr0 8 32 7823360 sdc 8 33 7819328 sdc1 8 16 1953514584 sdb 8 17 1953514528 sdb1 I am no expert on this and I'm at a loss as how to correct this without having to re-format everything and reinstall Windows 8. However, if I'm to try using Ubuntu again then there is the risk this problem may come back. Again, I did not do anything manually - the installer did everything (with the exception of changing the boot to Legacy to allow the booting of another bootloader). LiveCD works but doesn't give me the options that I've seen here and as mentioned earlier, only boot recovery only gives me the options as mentioned earlier. Also this fails to load via USB (possibly because HDD comes before USB in the boot order?). Being used to a Windows environment, the Ubuntu (and Linux) environment is a dive at a less than comfortable depth at present (but one I fully intend to get to grips with - especially the commands being more common via Terminal). I very much appreciate the help with this guys.

  Read the article

• How to set Grub to automatically load Xen kernel

  - by Cerin

  How do you configure Grub to automatically use the Xen kernel under Ubuntu 11.10? No matter what I do, it loads the first menuentry. The only way I can get it to load Xen is to manually select the kernel, which I can't do if I have to reboot the server remotely, or there's a power failure and the machine automatically boots up when power's restored, etc. It's driving me nuts. In my /boot/grub/grub.cfg, the Xen kernel is at index 4 (i.e. it's the 5th menuentry). So I've tried: Setting GRUB_DEFAULT=4, and running sudo update-grub Setting GRUB_DEFAULT=saved and GRUB_SAVEDEFAULT=true, and running sudo update-grub Setting GRUB_DEFAULT="Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server", and running sudo update-grub None of these work. It continues to load the first menuentry, which is "Ubuntu, with Linux 3.0.0-16-server". Below is my current /boot/grub/grub.cfg. What am I doing wrong? # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=2 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-16-server' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux /boot/vmlinuz-3.0.0-16-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro initrd /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu, with Linux 3.0.0-16-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Linux 3.0.0-16-server ...' linux /boot/vmlinuz-3.0.0-16-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-16-server } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.0.0-12-server' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux /boot/vmlinuz-3.0.0-12-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro initrd /boot/initrd.img-3.0.0-12-server } menuentry 'Ubuntu, with Linux 3.0.0-12-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Linux 3.0.0-12-server ...' linux /boot/vmlinuz-3.0.0-12-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-server } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### submenu "Xen 4.1-amd64" { menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-16-server ...' module /boot/vmlinuz-3.0.0-16-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-16-server ...' module /boot/vmlinuz-3.0.0-16-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro single echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-12-server' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-12-server ...' module /boot/vmlinuz-3.0.0-12-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-12-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-12-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-12-server ...' module /boot/vmlinuz-3.0.0-12-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro single echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-12-server } } ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

  Read the article

• Sound not working for uid=1003 but working fine for uid=1000

  - by Dirk Eddelbuettel

  Sounds works for uid=1000, but not for the main user on the system, running with uid=1003. Upon boot, the Ubuntu chime clearly plays. When the user is logged in, sound test shows no input device. I looked at several of the previous questions, added the user to audio, video, pulse, pulse-access --- but still no luck. To recap: This worked perfectly in 11.04, 11.10, 12.04. It works for the default user uid=1000, it does not work for the actual user. The differing group memberships are mainly for adm, admin, sudo and the like.

  Read the article

• Xerox 3100 mfp printer/ scanner not working not working

  - by Nikos

  I have installed the latest version of Ubuntu on my system. My problem is I cannot find the proper drivers for my printer/ scanner:Xerox Phaser 3100 MFP. Although it is recognised by the system and my print jobs appear as completed, in fact they are not. Also I have a problem with my wireless connectio. Although it is configured in the network settings, connection is not successful, unless I restart my router. What can I do? Thank you in advance

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >