Search Results

Search found 43 results on 2 pages for 'yoga'.

Page 1/2 | 1 2  | Next Page >

  • Yoga Pro 2 Wi-Fi not working

    - by user293004
    I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

    Read the article

  • Turning on Bluetooth disables wifi on Yoga 2

    - by Yostage
    I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

    Read the article

  • How do I get the brightness control working on a Lenovo Yoga 13?

    - by Viktor Ax
    Brightness control doesn't work by default in Ubuntu 13.04. Solution for 12.10 doesn't work, also as this Any idea how to fix it? Update: After research I found how to change brightness manually. What need to do is to type in terminal: echo 2000 | sudo tee /sys/class/backlight/intel_backlight/brightness It will reduce brightness by half, but still would be good to find solution which will allow to use keyboard for changing brightness. Update2: Found solution, see below

    Read the article

  • Directing from a 1und1 hosting solution, with urls intact

    - by Jelmar
    Hi, I have done this before on GoDaddy without a hitch, but I cannot seem to figure out this particular case. I have a domain space with temporary url http://yogainun.mysubname.com/ and am hosting the domain name that is to be applied to it at 1und1.de. Right now I have set it up so that from the 1und1 domain name hosting the address http://www.yoga-in-unternehmen.de/ is frame redirected to the subdomain that I just referred to. But this is not what I want. http://www.yoga-in-unternehmen.de/ is to be the domain. With the frame redirect, url's like http://www.yoga-in-unternehmen.de/example-article do not show up. But this is what I want. With godaddy in a similar case, I just turned on DNS and changed the name servers. That worked without problem, but with 1und1 not. Is there something I am missing?

    Read the article

  • Directing from a 1und1 hosting solution, with urls intact

    - by Jelmar
    I have done this before on GoDaddy without a hitch, but I cannot seem to figure out this particular case. I have a domain space with temporary url http://yogainun.mysubname.com/ and am hosting the domain name that is to be applied to it at 1und1.de. Right now I have set it up so that from the 1und1 domain name hosting the address http://www.yoga-in-unternehmen.de/ is frame redirected to the subdomain that I just referred to. But this is not what I want. http://www.yoga-in-unternehmen.de/ is to be the domain. With the frame redirect, url's like http://www.yoga-in-unternehmen.de/example-article do not show up. But this is what I want. With godaddy in a similar case, I just turned on DNS and changed the name servers. That worked without problem, but with 1und1 not. Is there something I am missing?

    Read the article

  • Error from sudo update-grub

    - by Jim
    I've installed Ubuntu 13.10 on a Lenovo yoga 13. In order to make the backlight work with the keys I've been following some instructions here: How do I get the brightness control working on a Lenovo Yoga 13? The process asks me to run update-grub, but this causes the following error: /usr/sbin/grub-mkconfig: 27: /etc/default/grub: want: not found Which doesn't seem to come up hardly anywhere on Google - which is me pretty much stumped when it comes to grub!

    Read the article

  • Are there any risk if your DNS's SOA or admin contact are using the same domain as the DNS

    - by Yoga
    For example, Google.com [1] The SOA email is : dns-admin.google.com The contact is: Administrative Contact: DNS Admin Google Inc. dns-admin.google.com As you can see, both are using google.com, I am thinking it is safe to use the same domain, i.e. consider the case you lost control of the domain, you can receive email also. (Of course Google is a public company so the chance is low, but might occur for smaller company that their domain might be stolen..) So, do you recommend use your the same domain as the contact or others free services such as gmail? [1] http://whois.domaintools.com/google.com

    Read the article

  • A lot of "(direct) / (none)" traffic in Google Analytics

    - by Yoga
    my web site has a lot of "(direct) / (none)" traffic (over 50%) in Google Analytics, but under the "Audience", 100% are new visitors, why is that? I am quite sure most of the Audience should be new visitor, but why so many "(direct) / (none)" traffic? Update: Actually we have launch a new site which this number drop significantly, so I am interested in knowing why the number was so high in the past.

    Read the article

  • Alternative to Google Adsense which has good international coverage

    - by Yoga
    I have a technical blog (programming related) which has around 500 visit per days, 70% are international visitors and 30% are from US/CA. Google Adsense disabled my account due to invalid clicks so I can't use them (no need to explain here, they suck hard and never respect and listen to the publishers' appeal) I have tried adbrite and recently using chitika but they almost give me nothing, e.g. chitika 13,865 Page Views 4 clicks $0.01 The performance is so poor even I don't want to mention about it. I am already putting a full top banner and a 350x200 box in article body. I am researching if any alternative would provide more revenue for my internation visitors or technical visitors. Thanks.

    Read the article

  • Should I set NOINDEX header for my JS, CSS and image files?

    - by Yoga
    Are there any harms if my site send NOINDEX headers for all my static assets? For image files, I refer to those valueless, e.g. background images, button images, etc. Update: more background information I have this concern is since recent Google said they also execute JS and they might fetch content via Ajax. So, for example, if I send noindex for my jQuery script, so Google would not be able to use them to load Ajax, I suppose it is not good for my site's SEO, right?

    Read the article

  • Any frameworks or library allow me to run large amount of concurrent jobs schedully?

    - by Yoga
    Are there any high level programming frameworks that allow me to run large amount of concurrent jobs schedully? e.g. I have 100K of urls need to check their uptime every 5 minutes Definitely I can write a program to handle this, but then I need to handle concurrency, queuing, error handling, system throttling, job distribution etc. Will there be a framework that I only focus on a particular job (i.e. the ping task) and the system will take care of the scaling and error handling for me? I am open to any language.

    Read the article

  • Why does rsync spawn multiple processes for me?

    - by Yoga
    I am using the following cron statement to backup from one folder to another folder in the same machine: 19 21 * * * root rsync -ac --delete /source/folder /dest/folder When I use pstree, I see the cron forked three processes +-cron---cron---rsync---rsync---rsync And ps 9972 ? Ds 1:00 rsync -ac --delete /source/folder /dest/folder 9973 ? S 0:29 rsync -ac --delete /source/folder /dest/folder 9974 ? S 0:09 rsync -ac --delete /source/folder /dest/folder Why are three processes? Can I limit to only one?

    Read the article

  • Deploy an AWS Auto Scaling groups using Chef Server

    - by Yoga
    You can, for example, to deploy an an Auto Scaling groups consists of web severs, ELB and DB using AWS CloudFormation (with Chef server): http://aws.amazon.com/cloudformation/aws-cloudformation-templates/ But, you need to initially create a CF template, is it possible to do it only using Chef Server and Knife? We don't want to rely much on the CloudFormation and seems the hosted Chef server at (http://www.opscode.com/) is able to do so. Any opensource alternative? Thanks.

    Read the article

  • Journaled filesystems and power failure

    - by Yoga
    I heard that even a journaled filesystems such as EXT3/EXT4 might corrupted during power failure, e.g. from wikipedia [1]: In the event of a system crash or power failure, such file systems are quicker to bring back online and less likely to become corrupted. Can anyone provide more detail by giving examples such that when corruption can occur corruption is avoided by journaled filesystems [1] http://en.wikipedia.org/wiki/Journaling_file_system

    Read the article

  • Nginx ignoring client's HTTP 1.0 request and respond by HTTP 1.1

    - by Yoga
    I am testing using nginx/php5-fpm, with the code <?php header($_SERVER["SERVER_PROTOCOL"]." 404 Not Found"); // also tested: header("Status: 404 Not Found"); echo $_SERVER["SERVER_PROTOCOL"]; And force to use HTTP 1.0 with the curl command. curl -0 -v 'http://www.example.com/test.php' > GET /test.php HTTP/1.0 < HTTP/1.1 404 Not Found < Server: nginx < Date: Sat, 27 Oct 2012 08:51:27 GMT < Content-Type: text/html < Connection: close < * Closing connection #0 HTTP/1.0 As you can see I am already requesting using HTTP 1.0, but nginx reply me with HTTP 1.1

    Read the article

  • Amazon EC2 Elastic Load Balancing - strategy for zero downtime server restart

    - by Yoga
    I have 5 web servers (Apache/mod_perl) behind Amazon EC2 Elastic Load Balancing, when I deploy codes to the web servers, I am doing this.. For each machine, shutdown the Apache Update the code Start over the server and proceed to the next server I think when my server is shutdown, ELB will not distribute request to my server, but how about the request still serving? I think a better approach is Stop accepting new request from ELB Sleep for sometimes, shutdown web server only if all requests are responded Update the codes Start the server again But how to perform (1) and (2) from my local sever? Do I need to use AWS API? or other easy way to do it? Thanks.

    Read the article

  • MySQL query cache is enabled but not being used

    - by Yoga
    I've checked the query cache is enabled mysql> SHOW VARIABLES LIKE 'have_query_cache'; +------------------+-------+ | Variable_name | Value | +------------------+-------+ | have_query_cache | YES | +------------------+-------+ 1 row in set (0.00 sec) But seems it is not being used mysql> SHOW STATUS LIKE 'Qcache%'; +-------------------------+----------+ | Variable_name | Value | +-------------------------+----------+ | Qcache_free_blocks | 1 | | Qcache_free_memory | 16759648 | | Qcache_hits | 0 | | Qcache_inserts | 0 | | Qcache_lowmem_prunes | 0 | | Qcache_not_cached | 21555882 | | Qcache_queries_in_cache | 0 | | Qcache_total_blocks | 1 | +-------------------------+----------+ 8 rows in set (0.00 sec) Any reason?

    Read the article

  • Improve efficiency when using parallel to read from compressed stream

    - by Yoga
    Is another question extended from the previous one [1] I have a compressed file and stream them to feed into a python program, e.g. bzcat data.bz2 | parallel --no-notice -j16 --pipe python parse.py > result.txt The parse.py can read from stdin continusuoly and print to stdout My ec2 instance is 16 cores but from the top command it is showing 3 to 4 load average only. From the ps, I am seeing a lot of stuffs like.. sh -c 'dd bs=1 count=1 of=/tmp/7D_YxccfY7.chr 2>/dev/null'; I know I can improve using the -a in.txtto improve performance, but with my case I am streaming from bz2 (I cannot exact it since I don't have enought disk space) How to improve the efficiency for my case? [1] Gnu parallel not utilizing all the CPU

    Read the article

  • Today's Links (6/24/2011)

    - by Bob Rhubart
    Fusion Applications - How we look at the near future | Domien Bolmers Bolmers recaps a Logica pow-wow around Fusion Applications. Who invented e-mail? | Nicholas Carr IT apparently does matter to Nicholas Carr as he shares links to Errol Morris's 5-part NYT series about the origins of email. David Sprott's Blog: Service Oriented Cloud (SOC) "Whilst all the really good Cloud environments are Service Oriented," says Sprott, "it’s very much the minority of consumer SaaS that is today." Fast, Faster, JRockit | René van Wijk Oracle ACE René van Wijk tells you "everything you ever wanted to know about the JRockit JVM, well quite a lot anyway." Creating an XML document based on my POJO domain model – how will JAXB help me? | Lucas Jellema "I thought that adding a few JAXB annotations to my existing POJO model would do the trick," says Jellema, "but no such luck." Announcing Oracle Environmental Accounting and Reporting | Theresa Hickman Oracle Environmental Accounting and Reporting is designed to help companies track and report greenhouse emissions. Yoga framework for REST-like partial resource access | William Vambenepe Vambenepe says: "A tweet by Stefan Tilkov brought Yoga to my attention, 'a framework for supporting REST-like URI requests with field selectors.'" InfoQ: Pragmatic Software Architecture and the Role of the Architect "Joe Wirtley introduces software architecture and the role of the architect in software development along with techniques, tips and resources to help one get started thinking as an architect."

    Read the article

  • viable part-time career in IT/programming?

    - by Rider
    Hi, I'd like to ask for some career advice from you people. Is there a viable job/career that can be done in programming/IT for the long term? Right now, I am thinking about website (PHP?) developer path. My background: I have a degree in computer science and have been a programmer/system analyst for almost 10 years. Lately I took a big break from programming and studied for a B.arch. degree (yes architecture), only to discover that architecture offers zero (0) jobs where I'm from, for 3 years already (and no, I am not going to move and the grass in not greener in other places). I have never been particularly interested in programming, in fact I was bored by it. But I was always quite good at both programming and system analysis, and very valued by practically all my employers. On the other hand, I have never been valued or offered a good job in any other field (although I can do many things, like design, architecture, translations, documentation, teaching, etc etc.) I guess the human component has been always more important for me in programming jobs - I value all the good people I worked with, but not projects. However, I have about zero skills or desire to be a project manager. I also have close to zero skills for selling myself. I like it best when I can do "my thing", have my niche, have an ownership of some project. Right now my career perspective is to do part time programming and to part time teach yoga. I have already started the yoga teaching part. Do you think that part time programming is viable? And what niche works best for that? I have considered web development, QA, or software development in a company like I did before. However, my fear is that when you do programming part-time, you get the most boring coding work, only to see your colleagues move to more interesting projects and up their respective career ladders. I also fear that part-timers are not especially needed either. And, since I don't share much enthusiasm at programming, I'd rather not be around young programmers boiling with geeky enthusiasm about coding, but rather QA mindset with people from different backgrounds and life paths might work better for me. Thanks for any advice, --Rider

    Read the article

  • Lenovo Ideapad Unstable Touchpad Cursor

    - by vicban3d
    I recently installed Ubuntu 14.04 on my Lenovo Yoga 2 Pro and there is a problem with the touchpad. Whenever I lift my finger from the touchpad or click, the cursor moves a little bit to a random direction which makes me miss the target I wanted to click. This is very annoying and I couldn't find a solution online. Can anyone tell me whether there is a solution to this problem and how would I fix it? Thanks in advance.

    Read the article

  • CodePlex Daily Summary for Monday, February 21, 2011

    CodePlex Daily Summary for Monday, February 21, 2011Popular ReleasesA2Command: 2011-02-21 - Version 1.0: IntroductionThis is the full release version of A2Command 1.0, dated February 21, 2011. These notes supersede any prior version's notes. All prior releases may be found on the project's website at http://a2command.codeplex.com/releases/ where you can read the release notes for older versions as well as download them. This version of A2Command is intended to replace any previous version you may have downloaded in the past. There were several bug fixes made after Release Candidate 2 and all...Chiave File Encryption: Chiave 0.9: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Feedbacks are Welcome!....Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...Azure Storage Samples: Version 1.0 (February 2011): These downloads contain source code. Each is a complete sample that fully exercises Windows Azure Storage across blobs, queues, and tables. The difference between the downloads is implementation approach. Storage DotNet CS.zip is a .NET StorageClient library implementation in the C# language. This library come with the Windows Azure SDK. Contains helper classes for accessing blobs, queues, and tables. Storage REST CS.zip is a REST implementation in the C# language. The code to implement R...MiniTwitter: 1.66: MiniTwitter 1.66 ???? ?? ?????????? 2 ??????????????????? User Streams ?????????View Layout Replicator for Microsoft Dynamics CRM 2011: View Layout Replicator (1.0.119.18): Initial releaseWindows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...Advanced Explorer for Wp7: Advanced Explorer for Wp7 Version 1.4 Test8: Added option to run under Lockscreen. Fixed a bug when you open a pdf/mobi file without starting adobe reader/amazon kindle first boost loading time for folders added \Windows directory (all devices) you can now interact with the filesystem while it is loading!Game Files Open - Map Editor: Game Files Open - Map Editor Beta 2 v1.0.0.0: The 2° beta release of the Map Editor, we have fixed a big bug of the files regen.Document.Editor: 2011.6: Whats new for Document.Editor 2011.6: New Left to Right and Left to Right support New Indent more/less support Improved Home tab Improved Tooltips/shortcut keys Minor Bug Fix's, improvements and speed upsCatel - WPF and Silverlight MVVM library: 1.2: Catel history ============= (+) Added (*) Changed (-) Removed (x) Error / bug (fix) For more information about issues or new feature requests, please visit: http://catel.codeplex.com =========== Version 1.2 =========== Release date: ============= 2011/02/17 Added/fixed: ============ (+) DataObjectBase now supports Isolated Storage out of the box: Person.Save(myStream) stores a whole object graph in Silverlight (+) DataObjectBase can now be converted to Json via Person.ToJson(); (+)...??????????: All-In-One Code Framework ??? 2011-02-18: ?????All-In-One Code Framework?2011??????????!!http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????,?????AzureBingMaps??????,??Azure,WCF, Silverlight, Window Phone????????,????????????????????????。 ???: Windows Azure SQL Azure Windows Azure AppFabric Windows Live Messenger Connect Bing Maps ?????: ??????HTML??? ??Windows PC?Mac?Silverlight??? ??Windows Phone?Silverlight??? ?????:http://blog.csdn.net/sjb5201/archive/2011...Image.Viewer: 2011: First version of 2011Silverlight Toolkit: Silverlight for Windows Phone Toolkit - Feb 2011: Silverlight for Windows Phone Toolkit OverviewSilverlight for Windows Phone Toolkit offers developers additional controls for Windows Phone application development, designed to match the rich user experience of the Windows Phone 7. Suggestions? Features? Questions? Ask questions in the Create.msdn.com forum. Add bugs or feature requests to the Issue Tracker. Help us shape the Silverlight Toolkit with your feedback! Please clearly indicate that the work items and issues are for the phone t...VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 29 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) Build 29 (beta)New: Added VsTortoise Solution Explorer integration for Web Project Folder, Web Folder and Web Item. Fix: TortoiseProc was called with invalid parameters, when using TSVN 1.4.x or older #7338 (thanks psifive) Fix: Add-in does not work, when "TortoiseSVN/bin" is not added to PATH environment variable #7357 Fix: Missing error message when ...Sense/Net CMS - Enterprise Content Management: SenseNet 6.0.3 Community Edition: Sense/Net 6.0.3 Community Edition We are happy to introduce you the latest version of Sense/Net with integrated ECM Workflow capabilities! In the past weeks we have been working hard to migrate the product to .Net 4 and include a workflow framework in Sense/Net built upon Windows Workflow Foundation 4. This brand new feature enables developers to define and develop workflows, and supports users when building and setting up complicated business processes involving content creation and response...thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.11): Features Added a new option that allows properties on data contract types to be marked as virtual. Bug Fixes Fixed a bug caused by certain project properties not being available on Web Service Software Factory projects. Fixed a bug that could result in the WrapperName value of the MessageContractAttribute being incorrect when the Adjust Casing option is used. The menu item code now caters for CommandBar instances that are not available. For example the Web Item CommandBar does not exist ...AllNewsManager.NET: AllNewsManager.NET 1.3: AllNewsManager.NET 1.3. This new version provide several new features, improvements and bug fixes. Some new features: Online Users. Avatars. Copy function (to create a new article from another one). SEO improvements (friendly urls). New admin buttons. And more...Facebook Graph Toolkit: Facebook Graph Toolkit 0.8: Version 0.8 (15 Feb 2011)moved to Beta stage publish photo feature "email" field of User object added new Graph Api object: Group, Event new Graph Api connection: likes, groups, eventsDJME - The jQuery extensions for ASP.NET MVC: DJME2 -The jQuery extensions for ASP.NET MVC beta2: The source code and runtime library for DJME2. For more product info you can goto http://www.dotnetage.com/djme.html What is new ?The Grid extension added The ModelBinder added which helping you create Bindable data Action. The DnaFor() control factory added that enabled Model bindable extensions. Enhance the ListBox , ComboBox data binding.New ProjectsAuto-mobile Forum: Automobileforum is a website regarding cars where users can share their ideas about cars and whatever information they want about a car they can get that from this website. The language used for development of this website is ASP.NET Azure Storage Samples: Azure Storage Samples are Windows Azure Storage code samples. They show how to perform every Windows Azure Storage operation for blobs, queues, and tables. There are 2 identical implementations, one using REST and the other using the .NET Storage Client Library (both in C#).b1234: b1234 is b1234betrayal: bahothBungee Jumper: This is a community website for a sport known as Bungee Jumping which is one of the most dangerous adventure sport. Chiave File Encryption: Application for file encryption and decryption using 512 Bit Rijndael encryption algorithm with simple UI to use. Its written in C# and compiled in .Net version 3.5, it incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass.DecEncIT: DecEncIT rend l’expérience de l’utilisateur commun avec la cryptographie (cryptage) plus aisée. Pas de soucies pour les réglages et les termes techniques, vagues et difficiles à comprendre ; inclus également une option pour automatiser toutes les tâches recommandées. VB.Net/3.5ELearningTutorial: A list of tutorialsExtjs Practice - Open our extj journey: ????extjs 1.demo ?? 2.partice ?? 3.work ??Functional: This class library for .NET 3.5 and 4.0 provides extension methods for delegates, to help with functional style programming.HauntedNetworking: HauntedNetworking is a site where people can share their paranormal experiences and related photographs. They can also share pictures of haunted and scary places across the world.KharaSoft Nexus: Nexus is the last inbox you'll ever need.Kojax: kojax projectLEAD - Learn Execute And Develop: It’s a portal to share your knowledge, learn from blogs, wikis, post your questions in query board, learn new things under video training, Execute and develop these, helping gaining knowledge.Luac For 5.1 ????: luac??????? Lunar Lander: Simple WPF Lunar Lander simulator, with reactive intelligent agent autopilot.MasterSchool: Tworzenie swiadectwmovies blogspot: The Movies blog- spot is an interactive site for the information related to movies, actors, personnel and fictional characters features. MvcTemplates: MvcTemplates is a project devoted to creating a complete suite of Razor Editor and Display templates that utilize attributes, built in models, and jQuery. It is developed in C# and packages the templates into an easy to use dll.MySearcher: Quickly and easily search the major search engines with MySearcher. No clicking around, no switching windows; No matter how many windows you have open, or what you're doing, Searching the major search engines is as simple as moving your mouse to the side of the screen!Photography in Kerala: Photography in Kerala's a website which makes easier for people who are into naturistic Photography to share their photos and other Info of Kerala(also called God's own country).You'll no longer have to search about Kerala,Or share your own info/pics here.Developed in ASP.Net.Pixels(Storage Engine): Pixels(Storage Engine)PortsManager: C# Project to Simplify working with Ports Currnetly it's working with COMs in Receive only and soon it'll be updated to work in send and expand the library to handle send informations even in network.Public Web Browser: Public Web Browser is a webbrowser client with alot of featuresRealStatus - MS Communicator 2007 & A Traffic Light Indicator Hardware: A demonstration of a traffic light indicator hardware corresponding to status events of MS Communicator in real-time. A demo video can be found here: http://www.youtube.com/watch?v=GwgfSVeXVksSABnzbdNet: A SABnzbd monitor and administrator. Built in C# WPF.Sendill: Kerfi fyrir sendibílastöðvarT4 Metadata and Data Annotations Template: This T4 template handles generating metadata classes from an Entity Framework 4 model and decorates primitive and navigation properties with data annotation attributes such as [Required] and [StringLength]. The [DataType] attribute is also applied when appropriate.urlshorten service: urlshorten service need storoom @ http://storoom.codeplex.com/ developed in vb.netuVersionClientCache: uVersionClientCache is a custom macro to always automatically version (URL querstring parameter) your files based on a MD5 hash of the file contents or file last modified date to prevent issues with client browsers caching an old file after you have changed it.Video Game Network Library: A lightweight network library written in C++ for video games.View Layout Replicator for Microsoft Dynamics CRM 2011: View Layout Replicator make it easier for Microsoft Dynamics CRM 2011 customizers to copying the layout of a view and paste it to the layout of other views in the same entityVLC MakeIT: This is virtual learning center yogaasana4you: The website is on Yoga Asana for the community who want to feel the amazing experience of Yoga asana - Yoga Exercises and Postures.

    Read the article

  • Help identifying device and driver for 0bda:1724

    - by user104547
    I've got a new Lenovo Ideapad Yoga 13. The onboard lan/bluetooth device is identified in Linux as 0bda:1724 (via lsusb). No network peripherals are reported from lspci. From the interwebs, the vendor:product above looks to be RT2573, however, in Windows, the device is identified as RTL8723A. Unfortunately, I have followed both roads, trying rt2500usb, rt2x00usb, and rtl8723e. I have emailed Realtek asking them for help but so far my email has fallen on deaf ears. I've posted the output of lspci -nn -v and lsusb -v to: http://pastebin.com/dqvTSVjF Any help at all would be appreciated. Thank you, Ryan

    Read the article

  • 13.10 Cursor Disappearing?

    - by ConnorRoberts
    Upgraded from 13.04 to 13.10 on my Ideapad Yoga yesterday, hoping it might have fixes for a couple of issues I've been having. While it seems to have made the touchscreen more usable, it has made the problem with my trackpad even worse :( In 13.04 and below, the cursor occasionally (maybe once or twice a day) would completely stop working and to get it working again I would run sudo modprobe -r psmouse sudo modprobe psmouse and it would be happy again, now every hour or so, my cursor just goes invisible, you can tell its still there as you can hover over things and they will respond. Again running sudo modprobe -r psmouse sudo modprobe psmouse works but it's getting a little annoying now its so frequent! Does anyone have any suggestions on things to try? :( Thanks in advance!

    Read the article

  • Does the lense for videos search youtube correctly

    - by Luis Alvarado
    When I search in youtube.com for "Erika Tipo 11" I get videos about the actual show. When I do the same using the Dash video Lense I get anything else except the actual show. I mean I even get chinesse stuff, some yoga lessons and anything VERY out there that is not even remotely related to the show. Now my questions are: Does the video lense search in a similar way as searching in youtube/vimeo/any other video site? Is there an option apart from the Filter settings to configure the behavior of the search so it searches in a similar way as one would do when searching from the actual site.

    Read the article

1 2  | Next Page >