Search Results

Search found 219 results on 9 pages for 'zee tee'.

Page 1/9 | 1 2 3 4 5 6 7 8 9  | Next Page >

• Alternative to the tee command whitout STDOUT

  - by aef

  I'm using | sudo tee FILENAME to be able to write or append to a file for which superuser permissions are required quite often. Although I understand why it is helpful in some situation, that tee also sends its input to STDOUT again, I never ever actually used that part of tee for anything useful. In most situations, this feature only causes my screen to be filled with unwanted jitter, if I don't go the extra step and manually silence it with tee 1> /dev/null. My question: Is there is a command arround, which does exactly the same thing as tee, but does by default not output anything to STDOUT?

  Read the article

• How to change SMP affinity of an IRQ on Ubuntu domU inside Xen XCP?

  - by Alexander Gladysh

  I'd like to change IRQ SMP affinity for reasons, outlined in this question: CPU0 is swamped with eth1 interrupts But I can't — I see Input/output error when I try to write to /proc/irq/*/smp_affinity. Please point me to the HOWTO on the matter. (A formal reference on /proc/irq/*/ would be cool as well.) Gory details: Note that this is a VM inside an Ubuntu-based Xen XCP host. $ uname -a Linux MYHOST 2.6.38-15-virtual #59-Ubuntu SMP Fri Apr 27 16:40:18 UTC 2012 i686 i686 i386 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.04 Release: 11.04 Codename: natty $ sudo cat /proc/irq/*/smp_affinity 01 01 01 01 01 80 80 80 80 80 80 40 40 40 40 40 40 20 20 20 20 20 20 10 10 10 10 10 10 08 08 08 08 08 08 04 04 04 04 04 04 02 02 02 02 02 02 01 01 01 01 01 01 Update. The error details: $ N=$(grep -c processor /proc/cpuinfo) $ echo $N 8 $ printf %x $((2**N-1)) ff $ printf %x $((2**N-1)) | sudo tee /proc/irq/*/smp_affinity fftee: /proc/irq/288/smp_affinity: Input/output error tee: /proc/irq/289/smp_affinity: Input/output error tee: /proc/irq/290/smp_affinity: Input/output error tee: /proc/irq/291/smp_affinity: Input/output error tee: /proc/irq/292/smp_affinity: Input/output error tee: /proc/irq/293/smp_affinity: Input/output error tee: /proc/irq/294/smp_affinity: Input/output error tee: /proc/irq/295/smp_affinity: Input/output error tee: /proc/irq/296/smp_affinity: Input/output error tee: /proc/irq/297/smp_affinity: Input/output error tee: /proc/irq/298/smp_affinity: Input/output error tee: /proc/irq/299/smp_affinity: Input/output error tee: /proc/irq/300/smp_affinity: Input/output error tee: /proc/irq/301/smp_affinity: Input/output error tee: /proc/irq/302/smp_affinity: Input/output error tee: /proc/irq/303/smp_affinity: Input/output error tee: /proc/irq/304/smp_affinity: Input/output error tee: /proc/irq/305/smp_affinity: Input/output error tee: /proc/irq/306/smp_affinity: Input/output error tee: /proc/irq/307/smp_affinity: Input/output error tee: /proc/irq/308/smp_affinity: Input/output error tee: /proc/irq/309/smp_affinity: Input/output error tee: /proc/irq/310/smp_affinity: Input/output error tee: /proc/irq/311/smp_affinity: Input/output error tee: /proc/irq/312/smp_affinity: Input/output error tee: /proc/irq/313/smp_affinity: Input/output error tee: /proc/irq/314/smp_affinity: Input/output error tee: /proc/irq/315/smp_affinity: Input/output error tee: /proc/irq/316/smp_affinity: Input/output error tee: /proc/irq/317/smp_affinity: Input/output error tee: /proc/irq/318/smp_affinity: Input/output error tee: /proc/irq/319/smp_affinity: Input/output error tee: /proc/irq/320/smp_affinity: Input/output error tee: /proc/irq/321/smp_affinity: Input/output error tee: /proc/irq/322/smp_affinity: Input/output error tee: /proc/irq/323/smp_affinity: Input/output error tee: /proc/irq/324/smp_affinity: Input/output error tee: /proc/irq/325/smp_affinity: Input/output error tee: /proc/irq/326/smp_affinity: Input/output error tee: /proc/irq/327/smp_affinity: Input/output error tee: /proc/irq/328/smp_affinity: Input/output error tee: /proc/irq/329/smp_affinity: Input/output error tee: /proc/irq/330/smp_affinity: Input/output error tee: /proc/irq/331/smp_affinity: Input/output error tee: /proc/irq/332/smp_affinity: Input/output error tee: /proc/irq/333/smp_affinity: Input/output error tee: /proc/irq/334/smp_affinity: Input/output error tee: /proc/irq/335/smp_affinity: Input/output error Update. irqbalance is running: $ sudo service irqbalance status irqbalance start/running, process 560

  Read the article

• Automatic Standby Recreation for Data Guard

  - by pablo.boixeda(at)oracle.com

  Hi,Unfortunately sometimes a Standby Instance needs to be recreated. This can happen for many reasons such as lost archive logs, standby data files, failover, among others.This is why we wanted to have one script to recreate standby instances in an easy way.This script recreates the standby considering some prereqs:-Database Version should be at least 11gR1-Dummy instance started on the standby node (Seeking to improve this so it won't be needed)-Broker configuration hasn't been removed-In our case we have two TNSNAMES files, one for the Standby creation (using SID) and the other one for production using service names (including broker service name)-Some environment variables set up by the environment db script (like ORACLE_HOME, PATH...)-The directory tree should not have been modified in the stanby hostWe are currently using it on our 11gR2 Data Guard tests.Any improvements will be welcome! Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} #!/bin/ksh ###    NOMBRE / VERSION ###       recrea_dg.sh   v.1.00 ### ###    DESCRIPCION ###       reacreacion de la Standby ### ###    DEVUELVE ###       0 Creacion de STANDBY correcta ###       1 Fallo ### ###    NOTAS ###       Este shell script NO DEBE MODIFICARSE. ###       Todas las variables y constantes necesarias se toman del entorno. ### ###    MODIFICADO POR:    FECHA:        COMENTARIOS: ###    ---------------    ----------    ------------------------------------- ###      Oracle           15/02/2011    Creacion. ### ### ### Cargar entorno ### V_ADMIN_DIR=`dirname $0` . ${V_ADMIN_DIR}/entorno_bd.sh 1>>/dev/null if [ $? -ne 0 ] then   echo "Error Loading the environment."   exit 1 fi V_RET=0 V_DATE=`/bin/date` V_DATE_F=`/bin/date +%Y%m%d_%H%M%S` V_LOGFILE=${V_TRAZAS}/recrea_dg_${V_DATE_F}.log exec 4>&1 tee ${V_FICH_LOG} >&4 |& exec 1>&p 2>&1 ### ### Variables para Recrear el Data Guard ### V_DB_BR=`echo ${V_DB_NAME}|tr '[:lower:]' '[:upper:]'` if [ "${ORACLE_SID}" = "${V_DB_NAME}01" ] then         V_LOCAL_BR=${V_DB_BR}'01'         V_REMOTE_BR=${V_DB_BR}'02' else         V_LOCAL_BR=${V_DB_BR}'02'         V_REMOTE_BR=${V_DB_BR}'01' fi echo " Getting local instance ROLE ${ORACLE_SID} ..." sqlplus -s /nolog 1>>/dev/null 2>&1 <<-! whenever sqlerror exit 1 connect / as sysdba variable salida number declare   v_database_role v\$database.database_role%type; begin   select database_role into v_database_role from v\$database;   :salida := case v_database_role        when 'PRIMARY' then 2        when 'PHYSICAL STANDBY' then 3        else 4      end; end; / exit :salida ! case $? in 1) echo " ERROR: Cannot get instance ROLE ." | tee -a ${V_LOGFILE}   2>&1    V_RET=1 ;; 2) echo " Local Instance with PRIMARY role." | tee -a ${V_LOGFILE}   2>&1    V_DB_ROLE_LCL=PRIMARY ;; 3) echo " Local Instance with PHYSICAL STANDBY role." | tee -a ${V_LOGFILE}   2>&1    V_DB_ROLE_LCL=STANDBY ;; *) echo " ERROR: UNKNOWN ROLE." | tee -a ${V_LOGFILE}   2>&1    V_RET=1 ;; esac if [ "${V_DB_ROLE_LCL}" = "PRIMARY" ] then         echo "####################################################################" | tee -a ${V_LOGFILE}   2>&1         echo "${V_DATE} - Reacreating  STANDBY Instance." | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         echo "DATAFILES, CONTROL FILES, REDO LOGS and ARCHIVE LOGS in standby instance ${V_REMOTE_BR} will be removed" | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         V_PRIMARY=${V_LOCAL_BR}         V_STANDBY=${V_REMOTE_BR} fi if [ "${V_DB_ROLE_LCL}" = "STANDBY" ] then         echo "####################################################################" | tee -a ${V_LOGFILE}   2>&1         echo "${V_DATE} - Reacreating  STANDBY Instance." | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         echo "DATAFILES, CONTROL FILES, REDO LOGS and ARCHIVE LOGS in standby instance ${V_LOCAL_BR} will be removed" | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         V_PRIMARY=${V_REMOTE_BR}         V_STANDBY=${V_LOCAL_BR} fi # Cargamos las variables de los hosts # Cargamos las variables de los hosts PRY_HOST=`sqlplus  /nolog << EOF | grep KEEP | sed 's/KEEP//;s/[   ]//g' connect sys/${V_DB_PWD}@${V_PRIMARY} as sysdba select 'KEEP',host_name from v\\$instance; EOF` SBY_HOST=`sqlplus  /nolog << EOF | grep KEEP | sed 's/KEEP//;s/[   ]//g' connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba select 'KEEP',host_name from v\\$instance; EOF` echo "el HOST primary es: ${PRY_HOST}" | tee -a ${V_LOGFILE}   2>&1 echo "el HOST standby es: ${SBY_HOST}" | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 ## ## Paramos la instancia STANDBY ## V_DATE=`/bin/date` echo "${V_DATE} - Shutting down Standby instance" | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ## ## Paramos la instancia STANDBY ## SBY_STATUS=`sqlplus  /nolog << EOF | grep KEEP | sed 's/KEEP//;s/[   ]//g' connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba select 'KEEP',status from v\\$instance; EOF` if [ ${SBY_STATUS} = 'STARTED' ] || [ ${SBY_STATUS} = 'MOUNTED' ] || [ ${SBY_STATUS} = 'OPEN' ] then         echo "${V_DATE} - Standby instance shutdown in progress..." | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1         sqlplus -s /nolog 1>>/dev/null 2>&1 <<-!         whenever sqlerror exit 1         connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba         shutdown abort         ! fi V_DATE=`/bin/date` echo "" echo "${V_DATE} - Standby instance stopped" | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ## ## Eliminamos los ficheros de la base de datos ## V_SBY_SID=`echo ${V_STANDBY}|tr '[:upper:]' '[:lower:]'` V_PRY_SID=`echo ${V_PRIMARY}|tr '[:upper:]' '[:lower:]'` ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/data/*.dbf ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/arch/*.arc ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/ctl/*.ctl ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/redo/*.ctl ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/redo/*.rdo ## ## Startup nomount stby instance ## V_DATE=`/bin/date` echo "" | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Starting  DUMMY Standby Instance " | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ssh ${SBY_HOST} touch /home/oracle/init_dg.ora ssh ${SBY_HOST} 'echo "DB_NAME='${V_DB_NAME}'">>/home/oracle/init_dg.ora' ssh ${SBY_HOST} touch /home/oracle/start_dummy.sh ssh ${SBY_HOST} 'echo "ORACLE_HOME=/opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2 ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "export ORACLE_HOME">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "PATH=\$ORACLE_HOME/bin:\$PATH">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "export PATH">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "ORACLE_SID='${V_SBY_SID}'">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "export ORACLE_SID">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "sqlplus -s /nolog <<-!" >>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "      whenever sqlerror exit 1 ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "      connect / as sysdba ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "      startup nomount pfile='\''/home/oracle/init_dg.ora'\''">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "! ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'chmod 744 /home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'sh /home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'rm /home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'rm /home/oracle/init_dg.ora' ## ## TNSNAMES change, specific for RMAN duplicate ## V_DATE=`/bin/date` echo "" | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Setting up TNSNAMES in PRIMARY host " | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ssh ${PRY_HOST} 'cp /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora.inst  /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora' V_DATE=`/bin/date` echo "" | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Starting STANDBY creation with RMAN.. " | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 rman<<-! >>${V_LOGFILE} connect target sys/${V_DB_PWD}@${V_PRIMARY} connect auxiliary sys/${V_DB_PWD}@${V_STANDBY} run { allocate channel prmy1 type disk; allocate channel prmy2 type disk; allocate channel prmy3 type disk; allocate channel prmy4 type disk; allocate auxiliary channel stby type disk; duplicate target database for standby from active database dorecover spfile parameter_value_convert '${V_PRY_SID}','${V_SBY_SID}' set control_files='/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/ctl/control01.ctl','/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/redo/control02.ctl' set db_file_name_convert='/opt/oracle/db/db${V_DB_NAME}/${V_PRY_SID}/','/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/' set log_file_name_convert='/opt/oracle/db/db${V_DB_NAME}/${V_PRY_SID}/','/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/' set 'db_unique_name'='${V_SBY_SID}' set log_archive_config='DG_CONFIG=(${V_PRIMARY},${V_STANDBY})' set fal_client='${V_STANDBY}' set fal_server='${V_PRIMARY}' set log_archive_dest_1='LOCATION=/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/arch DB_UNIQUE_NAME=${V_SBY_SID} MANDATORY VALID_FOR=(ALL_LOGFILES,ALL_ROLES)' set log_archive_dest_2='SERVICE="${V_PRIMARY}"','SYNC AFFIRM DB_UNIQUE_NAME=${V_PRY_SID} DELAY=0 MAX_FAILURE=0 REOPEN=300 REGISTER VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)' nofilenamecheck ; } ! V_DATE=`/bin/date` if [ $? -ne 0 ] then         echo ""         echo "${V_DATE} - Error creating STANDBY instance"         echo ""         echo "********************************************************************************" else         echo ""         echo "${V_DATE} - STANDBY instance created SUCCESSFULLY "         echo ""         echo "********************************************************************************" fi sqlplus -s /nolog 1>>/dev/null 2>&1 <<-!         whenever sqlerror exit 1         connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba         alter system set local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST=${SBY_HOST})(PORT=1544))' scope=both;         alter system set service_names='${V_DB_NAME}.eu.roca.net,${V_SBY_SID}.eu.roca.net,${V_SBY_SID}_DGMGRL.eu.roca.net' scope=both;         alter database recover managed standby database using current logfile disconnect from session;         alter system set dg_broker_start=true scope=both; ! ## ## TNSNAMES change, back to Production Mode ## V_DATE=`/bin/date` echo " " | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Restoring TNSNAMES in PRIMARY "  | tee -a ${V_LOGFILE}   2>&1 echo ""  | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************"  | tee -a ${V_LOGFILE}   2>&1 ssh ${PRY_HOST} 'cp /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora.prod  /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora' echo ""  | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} -  Waiting for media recovery before check the DATA GUARD Broker"  | tee -a ${V_LOGFILE}   2>&1 echo ""  | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************"  | tee -a ${V_LOGFILE}   2>&1 sleep 200 dgmgrl <<-! | grep SUCCESS 1>/dev/null 2>&1     connect ${V_DB_USR}/${V_DB_PWD}@${V_STANDBY}     show configuration verbose; ! if [ $? -ne 0 ] ; then         echo "       ERROR: El status del Broker no es SUCCESS" | tee -a ${V_LOGFILE}   2>&1 ;         V_RET=1 else          echo "      DATA GUARD OK " | tee -a ${V_LOGFILE}   2>&1 ; Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}         V_RET=0 fi Hope it helps.

  Read the article

• How to replicate tee behavior in python when using subprocess?

  - by Sorin Sbarnea

  I'm looking for a Python solution that will allow me to save the output of a command in a file without hiding it from the console. Requirements Python solution (not calling tee, it is not available under Windows) to work when calling external programs (subprocess) to work for both stderr and stdout

  Read the article

• Force line-buffering of stdout when piping to tee

  - by houbysoft

  Usually, stdout is line-buffered. In other words, as long as your printf argument ends with a newline, you can expect the line to be printed instantly. This does not appear to hold when using a pipe to redirect to tee. I have a C++ program, a, that outputs strings, always \n-terminated, to stdout. When it is run by itself (./a), everything prints correctly and at the right time, as expected. However, if I pipe it to tee (./a | tee output.txt), it doesn't print anything until it quits, which defeats the purpose of using tee. I know that I could fix it by adding a fflush(stdout) after each printing operation in the C++ program. But is there a cleaner, easier way? Is there a command I can run, for example, that would force stdout to be line-buffered, even when using a pipe?

  Read the article

• Tee a Pipe Asynchronously

  - by User1

  I would like to write the same information to two pipes, but I don't want to wait for the first pipe to read. Here's an example mkfifo one mkfifo two echo hi | tee one two & cat one & cat two & cat one does not start reading until cat two is run. Is there a way to make cat one run without waiting?

  Read the article

• How can I both pipe and display output in Windows' command line?

  - by Bob

  I have a process I need to run within a batch file. This process produces some output. I need to both display this output to the screen and send (pipe) it to another program. The bash method uses tee: echo 'ee' | tee /dev/tty | foo Is there an equivalent for Windows? I am happy to use PowerShell if necessary. There are tee ports for Windows, but there does not appear to be an equivalent for /dev/tty, which complicates matters. The specific use-case here: I have a program (launch4j) that I need to run, displaying output to the user. At the same time, I need to be able to detect success or failure in the script. Unfortunately, this program does not set an exit code, and I cannot force it to do so. My current workaround involves piping to find, to search the output (launch4j config.xml | find "Successfully created") - however, that swallows the output I need to display. Therefore, I need some way to both display to the screen and send the ouput to a command - and this command should be able to set ERRORLEVEL (it cannot run asynchronously).

  Read the article

• Use netcat as a proxy to log traffic

  - by deephacks

  I want to use netcat as a proxy to log http requests and responses to files, then tail these to inspect traffic. Think wireshark. Tried the following where 'fifo' is a named pipe, 'in' and 'out' are files, netcat proxy on port 8080, server on port 8081. while true; do cat fifo | nc -l -p 8080 | tee -a in | nc localhost 8081 | tee -a out 1fifo; done Problems: Netcat stop responing after first request (while loop ignored?). Netcat fails with msg localhost [127.0.0.1] 8081 (tproxy) : Connection refused if server unavailable on 8081. Question: Is it possible to "lazily" connect to 8081 when request is made? I.e. I do not want to have 8081 running when netcat is started.

  Read the article

• Need help to create database schema for wholesale online tee store

  - by techiepark

  Hi, I'm currently working on wholesale online t-shirt shop. I have done this for fixed quantity and price, and its working fine. Now i need to do this for variable quantity and price. Here is the reference link, like what i have to do. Basic tables i have created are - CREATE TABLE attribute ( attribute_id int(11) NOT NULL auto_increment, name varchar(100) NOT NULL, PRIMARY KEY (attribute_id) ); CREATE TABLE attribute_value ( attribute_value_id int(11) NOT NULL auto_increment, attribute_id int(11) NOT NULL, value varchar(100) NOT NULL, PRIMARY KEY (attribute_value_id), KEY idx_attribute_value_attribute_id (attribute_id) ); CREATE TABLE product ( product_id int(11) NOT NULL auto_increment, name varchar(100) NOT NULL, description varchar(1000) NOT NULL, price decimal(10,2) NOT NULL, image varchar(150) default NULL, thumbnail varchar(150) default NULL, PRIMARY KEY (product_id), FULLTEXT KEY idx_ft_product_name_description (name,description) ); CREATE TABLE product_attribute ( product_id int(11) NOT NULL, attribute_value_id int(11) NOT NULL, PRIMARY KEY (product_id,attribute_value_id) ); I'm not getting how to store the price based on variable quantity. Please help me to create product and its related tables. my requirement is same as above reference link.

  Read the article

• Internal "Tee" setup

  - by RadlyEel

  I have inherited some really old VC6.0 code that I am upgrading to VS2008 for building a 64-bit app. One required feature that was implemented long, long ago is overriding std::cout so its output goes simultaneously to a console window and to a file. The implementation depended on the then-current VC98 library implementation of ostream and, of course, is now irretrievably broken with VS2008. It would be reasonable to accumulate all the output until program termination time and then dump it to a file. I got part of the way home by using freopen(), setvbuf(), and ios::sync_with_stdio(), but to my dismay, the internal library does not treat its buffer as a ring buffer; instead when it flushes to the output device it restarts at the beginning, so every flush wipes out all my accumulated output. Converting to a more standard logging function is not desirable, as there are over 1600 usages of "std::cout << " scattered throughout almost 60 files. I have considered overriding ostream's operator<< function, but I'm not sure if that will cover me, since there are global operator<< functions that can't be overridden. (Or can they?) Any ideas on how to accomplish this?

  Read the article

• unix `tee` - chain of commands

  - by Mike

  In a unix environment, I want to use tee on a chain of commands like so $ echo 1; echo 2 | tee file 1 2 $ cat file 2 Why does file only end up as having the output from the final command? For the purpopses of this discussion, let's assume I can't break them apart and run the commands seperately.

  Read the article

• update terminal title from standard output of long running command?

  - by Sam Hasler

  I'd like to change the title of a terminal window during a long running command (for example: git svn fetch) with values greped from the output, whilst still writing to standard output. Is this possible using named pipes or tee and xargs? I'm thinking something like git svn fetch | sed "s/^\(r\d*\).*$/ \"\\\033]0;\"\1\"\\\007\"/" | xargs -l1 echo -ne based on: http://tldp.org/HOWTO/Xterm-Title-3.html Update: getting this to work would be enough: (echo "r9" ; echo "r10") | sed "s/^\(r\d*\).*$/ \"\\\033]0;\"\1\"\\\007\"/" | xargs -l1 echo -ne Update 2: This almost does what I want. I see r10, but not r9: (echo "r9" ; sleep 1 ; echo "r10") | sed "s/^\(r[0-9]*\)\.*$/\\\033]0;\1\\\007/" | xargs -0 echo -ne

  Read the article

• Cheat sheet exhibiting bash shell stdout/stderr redirection behavior

  - by SetJmp

  Is there a good cheat sheet demonstrating the many uses of BASH shell redirection? I would love to give such a thing to my students. Some examples I'd like to see covered: cmd > output_file.txt #redirect stdout to output_file.txt cmd 2> output_file.txt #redirect stderr to output_file.txt cmd >& outpout_file.txt #redirect both stderr and stdout to output_file.txt cmd1 | cmd2 #pipe cmd1 stdout to cmd2's stdin cmd1 2>&1 | cmd2 #pipe cmd1 stdout and stderr to cmd2's stdin cmd1 | tee result.txt #print cmd1's stdout to screen and also write to result.txt cmd1 2>&1 | tee result.txt #print stdout,stderr to screen while writing to result.txt (or we could just make this a community wiki and enumerate such things here) Thanks! SetJmp

  Read the article

• How can I gzip standard in to a file and also print standard in to standard out?

  - by Ross Rogers

  I want to execute a command, have the output of that command get gzip'd on the fly, and also echo/tee out the output of that command. i.e., something like: echo "hey hey, we're the monkees" | gzip --stdout > my_log.gz Except when the line executes, I want to see this on standard out: hey hey, we're the monkees

  Read the article

• Is there a network "tee"-alike with one leg returning to /dev/null ?

  - by Steff Davies

  I've just built a new PostgreSQL server for my employers, which is happily replicating using WALs. I'm now left with the problem of verifying its performance. One nice way which came up in conversation is to break replication with the slave caught up and then direct all production traffic to both servers, discarding the responses from the new server and returning those from the current one to the clients. Once we're sure performance is OK, we re-sync the slave and can fail over with confidence. Bliss. This would require a TCP proxy capable of opening two outgoing connections for each incoming one, and discarding the data returned from one of them, which is a tricky thing to google for, it seems. Do the assembled brains know of such a thing, before I dive into libevent and write one?

  Read the article

• Empty /var/log after running cron bash script

  - by Ortix92

  I wrote a little bash script and all of a sudden my /var/log folder is completely empty except for the log I created for the bash script. This is the script I'm running every hour with cron: #!/bin/bash STL_DIR=/path/to/some/folder/i/hid LOGFILE=/var/log/stl_upload.log now=`date` echo "----------Start of Transmission----------" 2>&1 | tee -a $LOGFILE echo "Starting transfer at $now" 2>&1 | tee -a $LOGFILE rsync -av -e ssh $STL_DIR [email protected]:/users/path/folder 2>&1 | tee -a $LOGFILE echo "----------End of transmission----------" 2>&1 | tee -a $LOGFILE printf "\n" 2>&1 | tee -a $LOGFILE I want to be clear that I'm not 100% certain this is related to the empty logs folder. So if anyone could give me a pointer as to what could be going on about the reason why my log folder is empty, that'd be great.

  Read the article

• sudo displays typed password in bash script

  - by Andy

  Hullo, I have a bash script that uses sudo a few times. There's a couple of strange points about it though. It asks me for my password a few seconds after I've already entered it for a previous command. The second time I enter my password, it's echoed to the display. Here's the relevant bits of the script. sudo service apache2 stop drush sql-dump --root="$SITE_DIR" --structure-tables-key=svn --ordered-dump | grep -iv 'dump completed on' | sudo tee "$DB_DIR/${SITE_NAME}.sql" > /dev/null sudo svn diff "$DB_DIR" | less sudo svn commit -m "$MESSAGE" "$DB_DIR" sudo service apache2 start The first password is to stop apache, and it works as expected. As mentioned, the sudo tee doesn't 'remember' that I have elevated privileges, asks for the password again, and echoes it to the screen. Given that tee is all about echoing to screen, I've played around a little with simple scripts which have | sudo tee, and they all work as expected. Ideas?! TIA Andy

  Read the article

• I will need a formula showing counts, totals and sub-totals for data set from different sheet

  - by Sapthagiri

  I am using MS2003 EXCEL. I have a cell in Sheet 1 with a color value and totals, with sub-totals. On sheet 2, I have a data set with 3 columns (colors, dress, type). On Sheet 1, I will need a tabulation showing Totals for Colors, with totals at sub-group of dress (shirt,pants) split by type totals (Full, Half, Tee) Below table represents my Data set in Sheet 2 Colors Make Dress Type -------------------------------- Red Arrow shirt full Red Levi shirt half blue Rugger Pant full yellow Wrangler shirt tee yellow Rugger Pant half yellow Arrow shirt tee yellow Wrangler Pant half Green Rugger Pant full Red Levi shirt tee blue Rugger Pant full blue Arrow shirt full blue Wrangler Pant half Green Levi shirt full I will need a formula showing counts, totals and sub-totals on Sheet 1 for data set from Sheet 2. Refer my table below which represent my expected data on Sheet 1, total Shirt Full Half Tees Pants Full Shorts Red 10 8 4 3 1 2 1 1 Blue Green Yellow Please note I am not looking for a Pivot table solution.

  Read the article

• CATiled Layer Question~

  - by Zee

  Hi guys, Was wondering how to apply the CATiled Layer to a webView rather than a scrollView. Went through a lot of books as well as searches and found absolutely nothing regarding how to successfully apply a CATiled Layer to a webView. The basic functionality is to make the website rendering smoother on a webView. I'd really appreciate if someone could provide their insight regarding this. Thanks, -Zee-

  Read the article

• Session Sharing with another User on *NIX and Windows

  - by Giri Mandalika

  Oracle Solaris Since Solaris is not widely known for its graphical interface, let's just focus on sharing a terminal session in read-only mode with another user on the same system. Here is an example. eg., % finger Login Name TTY Idle When Where root Super-User pts/1 Sat 16:57 dhcp-amer-vpn-rmdc-a sunperf ??? pts/2 4 Sat 16:41 pitcher.sfbay.sun.com In this example, two users root and sunperf are connected to the same system from two different terminals pts/1 and pts/2 respectively. If the root user wants to show something to sunperf user -- what s/he is doing in her/his terminal, for example, it can be accomplished with the following command. script -a /dev/null | tee -a <target_terminal eg., # script -a /dev/null | tee -a /dev/pts/2 Script started, file is /dev/null # # uptime 5:04pm up 1 day(s), 2:56, 2 users, load average: 0.81, 0.81, 0.81 # # isainfo -v 64-bit sparcv9 applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc 32-bit sparc applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc v8plus div32 mul32 # # exit Script done, file is /dev/null After the script .. | tee .. command, sunperf user should be able to see the root user's stdin and stdout contents in her/his own terminal until the script session exits in root user's terminal. Since this kind of sharing is based on capturing and redirecting the contents to the target terminal, the users on the receiving end won't be able to see whatever is being edited on initiators' terminal [using editors such as vi]. Also it is not possible to share the session with any connected user on the system unless the initiator has the necessary permissions and privileges. The script utility records everything printed in a terminal session, while the tee utility replicates the contents of the screen capture on to the standard output of the target terimal. The tee utility does not buffer the output - so, the screen capture from the initiators' terminal appears almost right away in the target terminal. Though I never tested, this technique may work on all *NIX and Linux flavors with little or no changes. Also there might be other ways to accomplish this. [Thanks to Sujeet for sharing this tip] Microsoft Windows Most of the Windows users may rely on VNC services to share a desktop session. Another way to share the desktop session is to use the Remote Desktop Connection (RDC) client. Here are the steps. Connect to the target Windows system using Remote Desktop Connection client Launch Windows Task Manager Navigate to the "Users" tab Find the user session that you want to connect to and have full control over as the other user who is currently holding that session Select the user name in Windows Task Manager, right click and choose the option "Remote Control" A window pops up on the other user's session with the message "<USER is requesting to control your session remotely. Do you accept the request?" Once the other user says "Yes", you will be granted access to that session. Since then both users should be able to see the same screen and even control the session from their respective workstations.

  Read the article

• DNS: forward part of a managed domain to one host, but sub domain services to another (Google Apps)

  - by Paul Zee

  I was going to post this as a comment against DNS: Forward domain to another host, but I don't seem able to do that. I'm in a similar situation. I have a DNS registered/managed by enom, except with the slight twist that the domain was originally registered with enom through a Google Apps account creation. The domain currently supports a Google Apps site/account. I now want to direct the bare primary domain and www entries to a hosting provider for the website component, but leave the Google Apps setup intact for its services such as calendar, mail etc. For now, I'm leaving the domain managed by enom. Also note that when I registered my account with the hosting provider, I gave the same domain name as the existing domain (e.g. example.com), so at their end I'm working with the same domain name in cpanel, etc. In my case, the existing enom DNS entries don't have an A record for the www.example.com, or the bare example.com domain. Instead, there are 4 x @ records with the Google Apps IP Address, 2 x TXT records with what I assume are Google Apps site verification strings/tokens, and a bunch of CNAME records for the various features of Google Apps (mail, calendar, docs, sites, etc). So, my questions: How do I point the www.example.com and example.com DNS entries at enom to my web site hosting provider, while leaving the domain managed by enom, and the Google Apps services working as they are now (with the obvious exception of Google Sites)? How do I setup the example.com mail-related DNS records (MX, etc) at the web site hosting provider, so that outbound email to [email protected] gets correctly sent to the google apps mail account, and doesn't get trapped inside the pseudo domain within the hosting providers servers?

  Read the article

• How do you exclude yourself from Google Analytics on your website using cookies?

  - by Keoki Zee

  I'm trying to set up an exclusion filter with a browser cookie, so that my own visits to my don't show up in my Google Analytics. I tried 3 different methods and none of them have worked so far. I would like help understanding what I am doing wrong and how I can fix this. Method 1 First, I tried following Google's instructions, http://www.google.com/support/analytics/bin/answer.py?hl=en&answer=55481, for excluding traffic by Cookie Content: Create a new page on your domain, containing the following code: <body onLoad="javascript:pageTracker._setVar('test_value');"> Method 2 Next, when that didn't work, I googled around and found this Google thread, http://www.google.com/support/forum/p/Google%20Analytics/thread?tid=4741f1499823fcd5&hl=en, where the most popular answer says to use a slightly different code: SHS Analytics wrote: <body onLoad="javascript:_gaq.push(['_setVar','test_value']);"> Thank you! This has now set a __utmv cookie containing "test_value", whereas the original: pageTracker._setVar('test_value') (which Google is still recommending) did not manage to do that for me (in Mac Safari 5 and Firefox 3.6.8). So I tried this code, but it didn't work for me. Method 3 Finally, I searched StackOverflow and came across this thread, http://stackoverflow.com/questions/3495270/exclude-my-traffic-from-google-analytics-using-cookie-with-subdomain, which suggests that the following code might work: <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setVar', 'exclude_me']); _gaq.push(['_setAccount', 'UA-xxxxxxxx-x']); _gaq.push(['_trackPageview']); // etc... </script> This script appeared in the head element in the example, instead of in the onload event of the body like in the previous 2 examples. So I tried this too, but still had no luck with trying to exclude myself from Google Analytics. Re-iterate question So, I tried all 3 methods above with no success. Am I doing something wrong? How can I exclude myself from my Google Analytics using an exclusion cookie for my browser?

  Read the article

• This for array colllision function doesn't work with anything but first object in array

  - by Zee Bashew

  For some reason, this simple simple loop is totally broken. (characterSheet is my character Class, it's just a movieClip with some extra functionality) (hitBox, is basically a square movieclip) Anyway: every time hitBox make contact with a characterSheet in a different order than they were created: Nothing happens. The program only seems to be listening to collisions that are made with o2[0]. As soon as another hitBox is created, it pushes the last one out of o2[0] and the last one becomes totally useless. What's super weird is that I can hit characterSheets in any order I like.... public function collisions(o1:Array, o2:Array) { if((o1.lenght>=0)&&(o2.length>=0)){ for (var i = 0; i < o1.length; i++) { var ob1 = o1[i]; for (var f = 0; f < o1.length; f++) { var ob2 = o2[f]; if (ob1 is characterSheet) { if (ob2.hitTestObject(ob1)) { var right:Boolean = true; if (ob1.x < hitBox(ob2).origin.x) right = false; characterSheet(ob1).specialDamage(hitBox(ob2).damageType, hitBox(ob2).damage, right); }}}}}} Also it might be somewhat helpful to see the function for creating a new hitBox public function SpawnHitBox(targeted, following, atype, xoff, yoff, ... args) { var newHitBox = new hitBox(targeted, following, atype, xoff, yoff, args); badCollisionObjects.push(newHitBox); arraydictionary[newHitBox] = badCollisionObjects; addChild(newHitBox); }

  Read the article

• Unable to force Debian to do unattended install... libc6 wants interactive confirm

  - by JD Long

  I'm trying to create a script that forces a Debian Lenny install to install the latest version of CRAN R. During the install it appears libc6 is upgraded and the install wants interactive confirm that it's OK to restart three services (mysql, exim4, cron). This process HAS to be unattended as it runs on Amazon's Elastic Map Reduce (EMR) machines. But I'm running out of options. Here's a few things I've tried: This previous question appears to be exactly what I'm looking for. So I set up my install script as follows: # set my CRAN repos... yes, I know there's a new convention where to put these. echo "deb http://cran.r-project.org/bin/linux/debian lenny-cran/" | sudo tee -a /etc/apt/sources.list echo "deb-src http://cran.r-project.org/bin/linux/debian lenny-cran/" | sudo tee -a /etc/apt/sources.list # set the dpkg.cfg options per the previous SuperUser question echo "force-confold" | sudo tee -a /etc/dpkg/dpkg.cfg echo "force-confdef" | sudo tee -a /etc/dpkg/dpkg.cfg export DEBIAN_FRONTEND=noninteractive # add key to keyring so it doesn't complain gpg --keyserver pgp.mit.edu --recv-key 381BA480 gpg -a --export 381BA480 > jranke_cran.asc sudo apt-key add jranke_cran.asc sudo apt-get update # install the latest R sudo apt-get install --yes --force-yes r-base But this script hangs with the following request for input: OK, so I tried stopping the services using the following script: sudo /etc/init.d/mysql stop sudo /etc/init.d/exim4 stop sudo /etc/init.d/cron stop sudo apt-get install --yes --force-yes libc6 This does not work and the interactive screen comes back, but this time with only cron listed as the service that must be restarted. So is there a way to make libc6 just restart these services with no user input? Or is there a way to stop cron so it does not cause an interactive prompt? Maybe a creative option I've never thought of? Keep in mind that this system is brought up, some Hadoop code is run, and then it's torn down. So I can put up with side effects and bad behavior that we might not want in a production desktop machine or web server.

  Read the article

• How to prevent Android bluetooth RFCOMM connection from dying immediately after .connect()?

  - by Gilead

  I'm trying to connect to a Zeemote (http://zeemote.com/) gaming controller from Moto Droid running 2.0.1 firmware. The test application below does connect to the device (LED flashes) but connection is dropped immediately after that. I can connect to the device perfectly fine using bluez tools (log attached as well). I'm quite at a loss here, I work on it for so long that I ran out of ideas so any help would be very much appreciated. Thanks, Max =========================================== Code: public class ZeeTest extends Activity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); try { test(); } catch (IOException e) { e.printStackTrace(); } } public void test() throws IOException { BluetoothDevice zee = BluetoothAdapter.getDefaultAdapter(). getRemoteDevice("00:1C:4D:02:A6:55"); Log.d("ZeeTest", "++++ Creating socket"); BluetoothSocket sock = zee.createRfcommSocketToServiceRecord( UUID.fromString("8e1f0cf7-508f-4875-b62c-fbb67fd34812")); Log.d("ZeeTest", "++++ Connecting"); sock.connect(); Log.d("ZeeTest", "++++ Connected"); final InputStream in = sock.getInputStream(); new Thread() { @Override public void run() { byte[] buffer = new byte[32]; int bytes = 0; int x = 0; Log.d("ZeeTest", "++++ Listening..."); while (x < 200) { x++; try { bytes = in.read(buffer); Log.d("ZeeTest", "++++ Read "+ bytes +" bytes"); } catch (IOException e) { // java.io.IOException: Software caused connection abort if (x % 50 == 0) { Log.d("ZeeTest", "Tried "+ x +" times ("+ bytes +")"); } try { Thread.sleep(100); } catch (InterruptedException ie) {} } } Log.d("ZeeTest", "++++ Done: thread exit"); } }.start(); Log.d("ZeeTest", "++++ Done: test()"); } } =========================================== Log: I/ActivityManager( 1169): Start proc zee.test for activity zee.test/.ZeeTest: pid=4294 uid=10084 gids={3002, 3001, 3003} I/dalvikvm( 4294): Debugger thread not active, ignoring DDM send (t=0x41504e4d l=38) D/dalvikvm( 4287): LinearAlloc 0x0 used 640700 of 5242880 (12%) I/dalvikvm( 4294): Debugger thread not active, ignoring DDM send (t=0x41504e4d l=20) D/ZeeTest ( 4294): ++++ Creating socket D/ZeeTest ( 4294): ++++ Connecting E/BluetoothEventLoop.cpp( 1169): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1240/hci0/dev_00_1C_4D_02_A6_55 I/usbd ( 1068): process_usb_uevent_message(): buffer = add@/devices/virtual/bluetooth/hci0/hci0:1 I/usbd ( 1068): main(): call select(...) E/BluetoothEventLoop.cpp( 1169): event_filter: Received signal org.bluez.Adapter:DeviceFound from /org/bluez/1240/hci0 V/BluetoothEventRedirector( 1242): Received android.bluetooth.device.action.FOUND V/BluetoothEventRedirector( 1242): Received android.bleutooth.device.action.UUID D/ZeeTest ( 4294): ++++ Connected D/ZeeTest ( 4294): ++++ Done: test() D/ZeeTest ( 4294): ++++ Listening... I/ActivityManager( 1169): Displayed activity zee.test/.ZeeTest: 2296 ms (total 2296 ms) E/BluetoothEventLoop.cpp( 1169): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1240/hci0/dev_00_1C_4D_02_A6_55 I/usbd ( 1068): process_usb_uevent_message(): buffer = remove@/devices/virtual/bluetooth/hci0/hci0:1 I/usbd ( 1068): main(): call select(...) V/BluetoothEventRedirector( 1242): Received android.bleutooth.device.action.UUID D/ZeeTest ( 4294): Tried 50 times (0) D/ZeeTest ( 4294): Tried 100 times (0) D/ZeeTest ( 4294): Tried 150 times (0) D/ZeeTest ( 4294): Tried 200 times (0) D/ZeeTest ( 4294): ++++ Done: thread exit =========================================== Terminal log: $ sdptool browse Inquiring ... Browsing 00:1C:4D:02:A6:55 ... $ sdptool records 00:1C:4D:02:A6:55 Service Name: Zeemote Service RecHandle: 0x10015 Service Class ID List: UUID 128: 8e1f0cf7-508f-4875-b62c-fbb67fd34812 Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 1 Language Base Attr List: code_ISO639: 0x656e encoding: 0x6a base_offset: 0x100 $ rfcomm connect /dev/tty10 00:1C:4D:02:A6:55 Connected /dev/rfcomm0 to 00:1C:4D:02:A6:55 on channel 1 Press CTRL-C for hangup # rfcomm show /dev/tty10 rfcomm0: 00:1F:3A:E4:C8:40 - 00:1C:4D:02:A6:55 channel 1 connected [reuse-dlc release-on-hup tty-attached] # cat /dev/tty10 (nothing here) # hcidump HCI sniffer - Bluetooth packet analyzer ver 1.42 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Read Remote Supported Features (0x0b) plen 11 < ACL data: handle 11 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > HCI Event: Max Slots Change (0x1b) plen 3 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > HCI Event: Command Status (0x0f) plen 4 > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x0000 < ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 3 scid 0x0040 > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x04fb scid 0x0040 result 1 status 2 Connection pending - Authorization pending > HCI Event: Remote Name Req Complete (0x07) plen 255 > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x04fb scid 0x0040 result 0 status 0 Connection successful < ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x04fb flags 0x00 clen 4 MTU 1013 (events are properly received using bluez)

  Read the article

1 2 3 4 5 6 7 8 9  | Next Page >