Trixbox: external SIP with no sound

Posted by Leandro Vidal on Server Fault See other posts from Server Fault or by Leandro Vidal
Published on 2011-06-24T07:35:56Z Indexed on 2011/06/24 8:24 UTC
Read the original article Hit count: 432

Filed under:

sip

|

sound

|

trixbox

I have a trixbox server and every works find except the external SIPs. Inside net all sound goes fine, but if I use a SIP phone outside the net, I can connect, I can receive calls but I there is no sound.

I have this text in the sip_nat.conf:

nat=yes
externhost=xxxxx.dyndns.org
localnet=192.168.1.0/255.255.255.0
localhost=192.168.1.210
externrefresh=10
qualify=yes

And I have the ports from 5036 to 5082, 4569 and from 10000 to 20000 redirected to 192.168.1.210 on TCP and UDP.

What's wrong?

Thank you very much in advance

© Server Fault or respective owner

Related posts about sip

Asterisk SIP digest authentication username mismatch

as seen on Super User - Search for 'Super User'
I have an asterisk system that I'm attempting to get to work as a backup for our 3com system. We already use it for a conference bridge. Our phones are the 3com 3C10402B, so I don't have the issue of older 3com phones that come without a SIP image. The 3com phones are communicating SIP with the… >>> More
Asterisk SIP digest authentication username mismatch

as seen on Server Fault - Search for 'Server Fault'
I have an asterisk system that I'm attempting to get to work as a backup for our 3com system. We already use it for a conference bridge. Our phones are the 3com 3C10402B, so I don't have the issue of older 3com phones that come without a SIP image. The 3com phones are communicating SIP with the… >>> More
Lync 2010, Kamailio, & Trixbox 2.6.23 (Asterisk 1.4)

as seen on Server Fault - Search for 'Server Fault'
I'm having an issue trying to connect Lync 2010 phone calls with our trixbox PBX. I've gotten to the point where Kamailio seems to be functioning properly and acting as a bridge between TCP traffic (from Lync) & UDP traffic (to the trixbox, as Asterisk 1.4 does not support SIP over TCP). Our… >>> More
PSTN Trunk TDM400P Install on Asterisk / Trixbox

as seen on Server Fault - Search for 'Server Fault'
Hey All, I'm trying to get a TDM400P card with FXO module to connect to our PSTN line. The card is correctly detected by Linux: [trixbox1.localdomain asterisk]# lspci 00:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I've run setup-pstn which… >>> More
Getting RINGING response on SIP UAC without sending it from the other UAC

as seen on Stack Overflow - Search for 'Stack Overflow'
Hi, I hope this would be my last question about this SIP subject, I have managed to overcome the last issue I had by asking a friend to help me from a remote computer, I'm able to connect between the computers, but here is the thing, according to all the examples I saw, the Callee should invoke the… >>> More

Related posts about sound

No sound after video card replaced (AMD Radeon HD 7770)

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Issue: no sound System: Dual boot Windows 7 (sda) Ubuntu 12.04 (sdb) 2 harddrives Dell XPS 730 Video card: AMD Radeo HD 7770 Diamond Multimedia Sound card: Creative Labs SB X-Fi Additional info: My sound used to work. Then, my old video card (NVIDIA geforce 280) died. I bought and… >>> More
No Sound card detected in Sound Settings, although sound works

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
I have Ubuntu 12.04 installed on my laptop. When I go to Sound Settings while logged into my user, no sound card appears detected. In spite of this, the sound on my laptop is working ok, and I can use alsamixer just fine. The Unity sound indicator is dead, and this is quite annoying. If I login… >>> More
Ubuntu 12.04, Can hear the sound but Sound option in settings shows no sound card

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
I have weired issue. I did a fresh installation of Ubuntu 12.04. Then I installed Nvidia drives for my graphics card. I executed the command "modprobe nvidia" after installing the Nvidia drivers and rebooted. After reboot, sound indicator in top panel is disabled and I can't control the volume from… >>> More
Play stereo sound as mono sound for different channel using c#.net

as seen on Super User - Search for 'Super User'
hi I want to play a stereo sound in the following manner using c#.net It’s a stereo track: Make it possible to hear only the L or only the R channel or both channels simultaneously. If you play only one channel put the audio out in mono so that you can hear the one channel in either speakers or… >>> More
OSS4 on Debian Squeeze

as seen on Super User - Search for 'Super User'
Hi, I am trying to get OSS4 to work on a Debian Squeeze 64 bit machine with an usb sound adapter. There is no sound from this adapter at the present, although it worked just before on the previous installation. You can see the output of some commands here: $ sudo /etc/init.d/oss4-base restart Stopping… >>> More