After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem?

Configuration summary
---------------------------

 1. Server name.....................raid_test
    Adaptec Storage Manager agent...7.31.00 (18856)
    Adaptec Storage Manager console.7.31.00 (18856)
    Number of controllers...........1
    Operating system................Windows

    Configuration information for controller 1
    -------------------------------------------------------
    Type............................Controller
    Model...........................Adaptec 5805
    Controller number...............1
    Physical slot...................2
    Installed memory size...........512 MB
    Serial number...................8C4510C6C9E
    Boot ROM........................5.2-0 (18948)
    Firmware........................5.2-0 (18948)
    Device driver...................5.2-0 (16119)
    Controller status...............Optimal
    Battery status..................Charging
    Battery temperature.............Normal
    Battery charge amount (%).......37
    Estimated charge remaining......0 days, 16 hours, 12 minutes
    Background consistency check....Disabled
    Copy back.......................Disabled
    Controller temperature..........Normal (40C / 104F)
    Default logical drive task priority High
    Performance mode................Dynamic
    Number of logical devices.......1
    Number of hot-spare drives......0
    Number of ready drives..........0
    Number of drive(s) assigned to MaxCache cache0
    Maximum drives allowed for MaxCache cache8
    MaxCache Read Cache Pool Size...0 GB
    NCQ status......................Enabled Stay
    awake status...............Disabled
    Internal drive spinup limit.....0
    External drive spinup limit.....0
    Phy 0...........................No device attached
    Phy 1...........................No device attached
    Phy 2...........................No device attached
    Phy 3...........................1.50 Gb/s
    Phy 4...........................No device attached
    Phy 5...........................No device attached
    Phy 6...........................No device attached
    Phy 7...........................No device attached
    Statistics version..............2.0
    SSD Cache size..................0
    Pages on fetch list.............0
    Fetch list candidates...........0
    Candidate replacements..........0
    69319...........................31293

    Logical device..................0
    Logical device name.............
    RAID level......................Simple volume
    Data space......................148,916 GB
    Date created....................09/19/2012
    Interface type..................Serial ATA
    State...........................Optimal
    Read-cache mode.................Enabled
    Preferred MaxCache read cache settingEnabled
    Actual MaxCache read cache setting Disabled
    Write-cache mode................Enabled (write-back)
    Write-cache setting.............Enabled (write-back)
    Partitioned.....................Yes
    Protected by hot spare..........No
    Bootable........................Yes
    Bad stripes.....................No
    Power Status....................Disabled
    Power State.....................Active
    Reduce RPM timer................Never
    Power off timer.................Never
    Verify timer....................Never
    Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT
    Overall host IOs................99075
    Overall MB......................4411203
    DRAM cache hits.................71929
    SSD cache hits..................0
    Uncached IOs....................29239
    Overall disk failures...........0
    DRAM cache full hits............71929
    DRAM cache fetch / flush wait...0
    DRAM cache hybrid reads.........3476
    DRAM cache flushes..............--
    Read hits.......................0
    Write hits......................0
    Valid Pages.....................0
    Updates on writes...............0
    Invalidations by large writes...0
    Invalidations by R/W balance....0
    Invalidations by replacement....0
    Invalidations by other..........0
    Page Fetches....................0
    0...............................0
    73..............................10822
    8...............................3
    46138...........................4916
    27184...........................15226
    20875...........................323
    16982...........................1771
    1563............................5317
    1948............................2969

    Serial attached SCSI
    -----------------------
    Type............................Disk drive
    Vendor..........................Unknown
    Model...........................ST3160815AS
    Serial Number...................9RX3KZMT
    Firmware level..................3.AAD
    Reported channel................0
    Reported SCSI device ID.........0
    Interface type..................Serial ATA
    Size............................149,05 GB
    Negotiated transfer speed.......1.50 Gb/s
    State...........................Optimal
    S.M.A.R.T. error................No
    Write-cache mode................Write back
    Hardware errors.................0
    Medium errors...................0
    Parity errors...................0
    Link failures...................0
    Aborted commands................0
    S.M.A.R.T. warnings.............0
    Solid-state disk (non-spinning).false
    MaxCache cache capable..........false
    MaxCache cache assigned.........false
    NCQ status......................Enabled
    Phy 0...........................1.50 Gb/s
    Power State.....................Full rpm
    Supported power states..........Full rpm, Powered off
    0x01............................113
    0x03............................98
    0x04............................99
    0x05............................100
    0x07............................83
    0x09............................75
    0x0A............................100
    0x0C............................99
    0xBB............................100
    0xBD............................100
    0xBE............................61
    0xC2............................39
    0xC3............................69
    0xC5............................100
    0xC6............................100
    0xC7............................200
    0xC8............................100
    0xCA............................100
    Aborted commands................0
    Link failures...................0
    Medium errors...................0
    Parity errors...................0
    Hardware errors.................0
    SMART errors....................0

End of the configuration information for controller 1