Connect ADSL modem SMC7904WBRA-N to CISCO RV082

Posted by Cy. on Server Fault See other posts from Server Fault or by Cy.
Published on 2012-10-17T16:26:07Z Indexed on 2012/10/17 17:04 UTC
Read the original article Hit count: 291

Filed under:

bridge

|

adsl

|

rv082

I have a SMC7904WBRA-N ADSL modem/router that connects to the internet with a static IP given by the provider.

I've received a RV082 to create a VPN connection which is having problems to connect to the remote VPN Server. After many tries we deduced that the SMC7904WBRA-N is being problematic with the NAT and I have been suggested to put the SMC router into the appropriate DSL bridging mode so the RV082 gets direct access to internet with the static IP.

Can you give me any hints on how could this be done? Which mode is that?

© Server Fault or respective owner

Related posts about bridge

How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

as seen on Server Fault - Search for 'Server Fault'
Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError:… >>> More
How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

as seen on Server Fault - Search for 'Server Fault'
Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError:… >>> More
WPA2 authentication fails on Ubuntu 12.04 using Rosewill RNX-N1

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. RNX-X1 works on other systems (including TV); also have… >>> More
WPA2 authentication fails using USB network devices (Linksys and Rosewill)

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. … >>> More
Using the Onboard VGA output with a PCIe video card. Both nVidia

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
I have 2 video cards, one On board, a nVidia 6150SE nForce 430 and a PCIe nVidia GeForce GT 220 1GB DDR2 RAM I have already configured the PCIe card to use the dual monitor feature, using the VGA and HDMI ports, but now I want to add a third monitor, using the On board VGA port I have managed to… >>> More

Related posts about adsl

Advice needed: ADSL and VPN for a small company

as seen on Server Fault - Search for 'Server Fault'
Hi. I need advice on purchasing an ADSL modem/router for a small company. At the moment, we are using the iBurst Wireless service for internet connectivity. I have the iBurst desktop modem, which connects to my Netgear WNR2000 router via ethernet. I am using the Netgear WNR2000 to deploy a wireless… >>> More
ADSL Modem Goes Slower Than Dialup

as seen on Super User - Search for 'Super User'
Hi All, I have two ADSL modems, the first one does not have wireless, but is configured and working fine at around 6 - 7 mbps (ADSL) on Orcon in New Zealand. I bought a Belkin N150 wireless router to replace the first one. I configured it exactly the same as the first one, but a speed test confirms… >>> More
Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

as seen on Server Fault - Search for 'Server Fault'
Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them… >>> More
ADSL Modem Goes Slower Than Dialup

as seen on Super User - Search for 'Super User'
Hi All, I have two ADSL modems, the first one does not have wireless, but is configured and working fine at around 6 - 7 mbps (ADSL) on Orcon in New Zealand. I bought a Belkin N150 wireless router to replace the first one. I configured it exactly the same as the first one, but a speed test confirms… >>> More
Windows 7 recognises the wrong router.

as seen on Super User - Search for 'Super User'
I have a cable router connected to my cable ISP. On the LANs are 4 computers, one of which is a dual boot XP/Win7 machine. I was given an ADSL wireless router which I connected to one of the LAN sockets on my cable router. I don't have an ADSL connection. All the machines connect correctly, some wirelessly… >>> More