Search Results

Search found 39 results on 2 pages for '3com'.

Page 1/2 | 1 2  | Next Page >

  • Problem connecting a 3Com 2952-Plus switch to a Cisco 3750 switch

    - by Noel
    Connected a 3Com 2952-SFP Plus switch to a Cisco 3750 switch via fibre. There is a light on the 3Com end, but nothing at the Cisco end, and no traffic will flow. Have swapped SFP's, have swapped fibre cables, have used a different port on the Cisco, have even swapped the 3Com switch, but still no joy. When I connect a 3Com 2948 switch over fibre that works OK. Any ideas?

    Read the article

  • DHCP Relay V DHCP Local Cisco v 3com

    - by DefSol
    Howdy, I have a client who has a WAN with 7 sites. At one site in particular, randomly about 4-5 clients do not get an IP address. The local gateway is a cisco 871 and relay's to a windows server in a Data Center running a valid scope for the subnet. If I put in a cisco 1800 and configure a dhcp scope (disabling the scope on the server) all clients get an ip address and everything is right with the world. The Wan providing keeps saying it's a local issue although we can work around with the 1800. The provider says a 3Com switch is at fault and the 1800 does not have a local switch, and because the 871 does, means the internal switching will receive a different uplink policy. The 3Com is the only managed switch in the subnet. Any ideas greatly appreciated. Reuben

    Read the article

  • DHCP Relay V DHCP Local Cisoc v 3com

    - by DefSol
    Howdy, I have a client who has a WAN with 7 sites. At one site in particular, randomly about 4-5 clients do not get an IP address. The local gateway is a cisco 871 and relay's to a windows server in a Data Center running a valid scope for the subnet. If I put in a cisco 1800 and configure a dhcp scope (disabling the scope on the server) all clients get an ip address and everything is right with the world. The Wan providing keeps saying it's a local issue although we can work around with the 1800. The provider says a 3Com switch is at fault and the 1800 does not have a local switch, and because the 871 does, means the internal switching will receive a different uplink policy. The 3Com is the only managed switch in the subnet. Any ideas greatly appreciated. Reuben

    Read the article

  • Users loggin to 3Com switches authenticated by radius not getting admin priv and no access available

    - by 3D1L
    Hi, Following the setup that I have for my Cisco devices, I got some basic level of functionality authenticating users that loggin to 3Com switches authenticated against a RADIUS server. Problem is that I can not get the user to obtain admin privileges. I'm using Microsoft's IAS service. According to 3Com documentation when configuring the access policy on IAS the value of 010600000003 have to be used to specify admin access level. That value have to be input in the Dial-in profile section: 010600000003 - indicates admin privileges 010600000002 - manager 010600000001 - monitor 010600000000 - visitor Here is the configuration on the switch: radius scheme system server-type standard primary authentication XXX.XXX.XXX.XXX accounting optional key authentication XXXXXX key accounting XXXXXX domain system scheme radius-scheme system local-user admin service-type ssh telnet terminal level 3 local-user manager service-type ssh telnet terminal level 2 local-user monitor service-type ssh telnet terminal level 1 The configuration is working with the IAS server because I can check user login events with the Eventviewer tool. Here is the output of the DISPLAY RADIUS command at the switch: [4500]disp radius SchemeName =system Index=0 Type=standard Primary Auth IP =XXX.XXX.XXX.XXX Port=1645 State=active Primary Acct IP =127.0.0.1 Port=1646 State=active Second Auth IP =0.0.0.0 Port=1812 State=block Second Acct IP =0.0.0.0 Port=1813 State=block Auth Server Encryption Key= XXXXXX Acct Server Encryption Key= XXXXXX Accounting method = optional TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12 Permitted send realtime PKT failed counts =5 Retry sending times of noresponse acct-stop-PKT =500 Quiet-interval(min) =5 Username format =without-domain Data flow unit =Byte Packet unit =1 Total 1 RADIUS scheme(s). 1 listed Here is the output of the DISPLAY DOMAIN and DISPLAY CONNECTION commands after users log into the switch: [4500]display domain 0 Domain = system State = Active RADIUS Scheme = system Access-limit = Disable Domain User Template: Idle-cut = Disable Self-service = Disable Messenger Time = Disable Default Domain Name: system Total 1 domain(s).1 listed. [4500]display connection Index=0 ,Username=admin@system IP=0.0.0.0 Index=2 ,Username=user@system IP=xxx.xxx.xxx.xxx On Unit 1:Total 2 connections matched, 2 listed. Total 2 connections matched, 2 listed. [4500] Here is the DISP RADIUS STATISTICS: [4500] %Apr 2 00:23:39:957 2000 4500 SHELL/5/LOGIN:- 1 - ecajigas(xxx.xxx.xxx.xxx) in un it1 logindisp radius stat state statistic(total=1048): DEAD=1046 AuthProc=0 AuthSucc=0 AcctStart=0 RLTSend=0 RLTWait=2 AcctStop=0 OnLine=2 Stop=0 StateErr=0 Received and Sent packets statistic: Unit 1........................................ Sent PKT total :4 Received PKT total:1 Resend Times Resend total 1 1 2 1 Total 2 RADIUS received packets statistic: Code= 2,Num=1 ,Err=0 Code= 3,Num=0 ,Err=0 Code= 5,Num=0 ,Err=0 Code=11,Num=0 ,Err=0 Running statistic: RADIUS received messages statistic: Normal auth request , Num=1 , Err=0 , Succ=1 EAP auth request , Num=0 , Err=0 , Succ=0 Account request , Num=1 , Err=0 , Succ=1 Account off request , Num=0 , Err=0 , Succ=0 PKT auth timeout , Num=0 , Err=0 , Succ=0 PKT acct_timeout , Num=3 , Err=1 , Succ=2 Realtime Account timer , Num=0 , Err=0 , Succ=0 PKT response , Num=1 , Err=0 , Succ=1 EAP reauth_request , Num=0 , Err=0 , Succ=0 PORTAL access , Num=0 , Err=0 , Succ=0 Update ack , Num=0 , Err=0 , Succ=0 PORTAL access ack , Num=0 , Err=0 , Succ=0 Session ctrl pkt , Num=0 , Err=0 , Succ=0 RADIUS sent messages statistic: Auth accept , Num=0 Auth reject , Num=0 EAP auth replying , Num=0 Account success , Num=0 Account failure , Num=0 Cut req , Num=0 RecError_MSG_sum:0 SndMSG_Fail_sum :0 Timer_Err :0 Alloc_Mem_Err :0 State Mismatch :0 Other_Error :0 No-response-acct-stop packet =0 Discarded No-response-acct-stop packet for buffer overflow =0 The other problem is that when the RADIUS server is not available I can not log in to the switch. The switch have 3 local accounts but none of them works. How can I specify the switch to use the local accounts in case that the RADIUS service is not available?

    Read the article

  • Baseline 2952-SFP normal?

    - by Atlas
    I just installed a 3com 2952-sfp, and I had its port #48 connected to another gigabit switch through a cat5e cable. Now when I look at the logs, I see the lines shown below: Mar 23 11:20:15:829 2010 MSTP Critical PFWD Instance 0's GigabitEthernet1/0/48 has been set to forwarding state! Mar 23 11:20:15:822 2010 IFNET Warning LINK UPDOWN GigabitEthernet1/0/48: link status is UP Mar 23 11:20:12:974 2010 IFNET Warning LINK UPDOWN GigabitEthernet1/0/48: link status is DOWN The above happens like dozens of times per day, is there something wrong with my setup?

    Read the article

  • If a managed network switch were to overheat, would you consider it no longer reliable?

    - by Scott Szretter
    Here is the scenario - I have a network switch, one of several in a stack. It's fan failed. Soon, there were reports of users with network issues. After quickly replacing the fan, the users were fine, network issues were resolved. I assume the unit was overheating, and thus failing somehow. Today someone suggested to me, that I should not assume the unit is 100% reliable anymore. So what do you think, would an overheat condition (less than 1 day with the fan stopped) potentially cause permanent damage that could at some point come to the surface as future network failures/issues? If it matters, we are talking managed switches such as 3Com/HP SuperStack , ProCurve or PWR-Plus.

    Read the article

  • InterVLAN routing on a HP V1910 series switch

    - by tintix
    Recently bought a HP V1910-16G switch (former 3com 29??) with IPv4 routing capabilities. After unpacking I did a firmware upgrade to the latest 5.20 Release 1513P06. I did set up additional VLANs (#2 and #3) and VLAN interfaces for those. The problem is that connected PCs on different VLAN's can't ping each other. Looks like VLAN routing doesn't even work. So here's my setup: VLAN ID VLAN interface 1 10.0.0.21/24 2 10.0.5.1/24 3 10.0.6.1/24 Have one PC connected to VLAN 2 (IP address 10.0.5.2, default gateway 10.0.5.1) and a second PC connected to VLAN 3 (IP address 10.0.6.2, default gateway 10.0.6.1) Routing table: Destination IP Mask Next Hop 0.0.0.0 0.0.0.0 10.0.0.1 10.0.0.0 255.255.255.0 10.0.0.21 10.0.0.21 255.255.255.255 127.0.0.1 10.0.5.0 255.255.255.0 10.0.5.1 10.0.5.1 255.255.255.255 127.0.0.1 10.0.6.0 255.255.255.0 10.0.6.1 10.0.6.1 255.255.255.255 127.0.0.1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 255.255.255.255 127.0.0.1 The first PC can't ping the second PC one and vice versa. They only can ping their own gateways and that's all. What I'm doing wrong?

    Read the article

  • HP MSR 30-10a Router - Route Traffic over Default Route

    - by SteadH
    We have a brand new HP MSR 30-10a Router. We have a fairly simple routing situation - we have two IP blocks, one which has a route out. We need things on the first block to go through the router, and out. I have an old Cisco 2801 router doing the job right now. For our example - IP Block 1: 50.203.110.232/29, Router interface on this block is 50.203.110.237, route out is 50.203.110.233. IP Block 2: 50.202.219.1/27, Router interface on this block at 50.202.219.20. I have a static route created for: 0.0.0.0 0.0.0.0 50.203.110.233 The router seems to understand this. When on the CLI via serial cable, I can ping 8.8.8.8 and hear responses from Google DNS. Woo hoo! The issue arrives when any client sits on the IP Block 2 side. I configured my client with a static IP of 50.202.219.15/27, default gateway 50.202.219.20. I can ping myself. I can ping the near side of the router (50.202.219.20), and I can ping the far side of the router (50.203.110.237. I cannot ping anything else in IP block 1, nor can I ping 8.8.8.8. Here is my configuration file: <HP>display current-configuration # version 5.20.106, Release 2507, Standard # sysname HP # domain default enable system # dar p2p signature-file flash:/p2p_default.mtd # port-security enable # undo ip http enable # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet # cwmp undo cwmp enable # interface Aux0 async mode flow link-protocol ppp # interface Cellular0/0 async mode protocol link-protocol ppp # interface Ethernet0/0 port link-mode route ip address 50.203.110.237 255.255.255.248 # interface Ethernet0/1 port link-mode route ip address 50.202.219.20 255.255.255.224 # interface NULL0 # ip route-static 0.0.0.0 0.0.0.0 50.203.110.233 permanent # load xml-configuration # load tr069-configuration # user-interface tty 12 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme # My guess right now is there is some sort of "permission" needed to use the default route. The manuals haven't turned up a lot in this area that don't make the situation much more complicated (but maybe it needs to be more complicated?) Background: we use HP switches, and I love the CLI. I bought HP thinking the command line interface would be similar, or at least speak the same language. Whoops! I'd be happy to provide more information or perform any additional tests. Thanks in advance! Update 1: The manual mentions routing rules. I hadn't previously added these (since our Cisco 2801 seems to route anything by default). I added: ip ip-prefix 1 permit 0.0.0.0 0 less-equal 32 alas, still no dice.

    Read the article

  • Asterisk SIP digest authentication username mismatch

    - by Matt
    I have an asterisk system that I'm attempting to get to work as a backup for our 3com system. We already use it for a conference bridge. Our phones are the 3com 3C10402B, so I don't have the issue of older 3com phones that come without a SIP image. The 3com phones are communicating SIP with the Asterisk, but are unable to register because they present a digest username value that doesn't match what Asterisk thinks it should. As an example, here are the relevant lines from a successful registration from a soft phone: Server sends: WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="1cac3853" Phone responds: Authorization: Digest username="2321", realm="asterisk", nonce="1cac3853", uri="sip:192.168.254.12", algorithm=md5, response="d32df9ec719817282460e7c2625b6120" For the 3com phone, those same lines look like this (and fails): Server sends: WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="6c915c33" Phone responds: Authorization: Digest username="sip:[email protected]", realm="asterisk", nonce="6c915c33", uri="sip:192.168.254.12", opaque="", algorithm=MD5, response="a89df25f19e4b4598595f919dac9db81" Basically, Asterisk wants to see a username in the Digest username field of 2321, but the 3com phone is sending sip:[email protected]. Anyone know how to tell asterisk to accept this format of username in the digest authentication? Here is the sip.conf info for that extension: [2321] deny=0.0.0.0/0.0.0.0 disallow=all type=friend secret=1234 qualify=yes port=5060 permit=0.0.0.0/0.0.0.0 nat=yes mailbox=2321@device host=dynamic dtmfmode=rfc2833 dial=SIP/2321 context=from-internal canreinvite=no callerid=device <2321 allow=ulaw, alaw call-limit=50 ... and for those interested in the grit, here is the debug output of the registration attempt: REGISTER sip:192.168.254.12 SIP/2.0 v: SIP/2.0/UDP 192.168.254.157:5060 t: f: i: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER Max-Forwards: 70 m: ;dt=544 Expires: 3600 User-Agent: 3Com-SIP-Phone/V8.0.1.3 X-3Com-PhoneInfo: firstRegistration=no; primaryCallP=192.168.254.12; secondaryCallP=0.0.0.0; --- (11 headers 0 lines) --- Using latest REGISTER request as basis request Sending to 192.168.254.157 : 5060 (no NAT) SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: Content-Length: 0 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: ;tag=as3fb867e2 Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="6c915c33" Content-Length: 0 Scheduling destruction of SIP dialog 'fa4451d8-01d6-1cc2-13e4-00e0bb33beb9' in 32000 ms (Method: REGISTER) confbridge*CLI REGISTER sip:192.168.254.12 SIP/2.0 v: SIP/2.0/UDP 192.168.254.157:5060 t: f: i: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER Max-Forwards: 70 m: ;dt=544 Expires: 3600 User-Agent: 3Com-SIP-Phone/V8.0.1.3 Authorization: Digest username="sip:[email protected]", realm="asterisk", nonce="6c915c33", uri="sip:192.168.254.12", opaque="", algorithm=MD5, response="a89df25f19e4b4598595f919dac9db81" X-3Com-PhoneInfo: firstRegistration=no; primaryCallP=192.168.254.12; secondaryCallP=0.0.0.0; --- (12 headers 0 lines) --- Using latest REGISTER request as basis request Sending to 192.168.254.157 : 5060 (NAT) SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: Content-Length: 0 SIP/2.0 403 Authentication user name does not match account name Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: ;tag=as3fb867e2 Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Content-Length: 0 Scheduling destruction of SIP dialog 'fa4451d8-01d6-1cc2-13e4-00e0bb33beb9' in 32000 ms (Method: REGISTER) Thanks for your input!

    Read the article

  • Asterisk SIP digest authentication username mismatch

    - by Matt
    I have an asterisk system that I'm attempting to get to work as a backup for our 3com system. We already use it for a conference bridge. Our phones are the 3com 3C10402B, so I don't have the issue of older 3com phones that come without a SIP image. The 3com phones are communicating SIP with the Asterisk, but are unable to register because they present a digest username value that doesn't match what Asterisk thinks it should. As an example, here are the relevant lines from a successful registration from a soft phone: Server sends: WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="1cac3853" Phone responds: Authorization: Digest username="2321", realm="asterisk", nonce="1cac3853", uri="sip:192.168.254.12", algorithm=md5, response="d32df9ec719817282460e7c2625b6120" For the 3com phone, those same lines look like this (and fails): Server sends: WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="6c915c33" Phone responds: Authorization: Digest username="sip:[email protected]", realm="asterisk", nonce="6c915c33", uri="sip:192.168.254.12", opaque="", algorithm=MD5, response="a89df25f19e4b4598595f919dac9db81" Basically, Asterisk wants to see a username in the Digest username field of 2321, but the 3com phone is sending sip:[email protected]. Anyone know how to tell asterisk to accept this format of username in the digest authentication? Here is the sip.conf info for that extension: [2321] deny=0.0.0.0/0.0.0.0 disallow=all type=friend secret=1234 qualify=yes port=5060 permit=0.0.0.0/0.0.0.0 nat=yes mailbox=2321@device host=dynamic dtmfmode=rfc2833 dial=SIP/2321 context=from-internal canreinvite=no callerid=device <2321 allow=ulaw, alaw call-limit=50 ... and for those interested in the grit, here is the debug output of the registration attempt: REGISTER sip:192.168.254.12 SIP/2.0 v: SIP/2.0/UDP 192.168.254.157:5060 t: f: i: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER Max-Forwards: 70 m: ;dt=544 Expires: 3600 User-Agent: 3Com-SIP-Phone/V8.0.1.3 X-3Com-PhoneInfo: firstRegistration=no; primaryCallP=192.168.254.12; secondaryCallP=0.0.0.0; --- (11 headers 0 lines) --- Using latest REGISTER request as basis request Sending to 192.168.254.157 : 5060 (no NAT) SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: Content-Length: 0 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: ;tag=as3fb867e2 Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="6c915c33" Content-Length: 0 Scheduling destruction of SIP dialog 'fa4451d8-01d6-1cc2-13e4-00e0bb33beb9' in 32000 ms (Method: REGISTER) confbridge*CLI REGISTER sip:192.168.254.12 SIP/2.0 v: SIP/2.0/UDP 192.168.254.157:5060 t: f: i: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER Max-Forwards: 70 m: ;dt=544 Expires: 3600 User-Agent: 3Com-SIP-Phone/V8.0.1.3 Authorization: Digest username="sip:[email protected]", realm="asterisk", nonce="6c915c33", uri="sip:192.168.254.12", opaque="", algorithm=MD5, response="a89df25f19e4b4598595f919dac9db81" X-3Com-PhoneInfo: firstRegistration=no; primaryCallP=192.168.254.12; secondaryCallP=0.0.0.0; --- (12 headers 0 lines) --- Using latest REGISTER request as basis request Sending to 192.168.254.157 : 5060 (NAT) SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: Content-Length: 0 SIP/2.0 403 Authentication user name does not match account name Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: ;tag=as3fb867e2 Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Content-Length: 0 Scheduling destruction of SIP dialog 'fa4451d8-01d6-1cc2-13e4-00e0bb33beb9' in 32000 ms (Method: REGISTER) Thanks for your input!

    Read the article

  • What's the best way to block IP spoofing on a layer 3 switch?

    - by toupeira
    We're hosting Dedicated Servers and are currently using old 3com switches with IP-based ACLs. So each port has an ACL that allows all IP addresses assigned to this customer, and blocks everything else. But now 3com was bought by HP, and the follow-up model only supports basic ACL that aren't flexible enough to both allow certain IPs while blocking others. Looking at other switches in a similar price-range, we've found that most of them have similar problems or don't offer any ACL features at all. I assume this could also somehow be done with VLANs, but if I understand this correctly we'd still need some kind of ACL to actually specify the valid IP addresses for each port. What do you use to make sure your customers don't use unassigned IP addresses? Or what switches can you recommend that have flexible ACL functionality?

    Read the article

  • Delayed internet access

    - by Joel Coel
    When I (and presumably my users) first start up or log in to my computer I can't get internet access until several minutes after logging in. Internet pages like serverfault.com will time out. During this time I can access internal web servers. Sometimes pinging the gateway seems to fix the problem. I'm using Windows 7 on this machine with wifi, and the problem seems limited to the wifi network, which is on a separate vlan. The wired network does not share the problem, but I know it's not the wifi connection itself because the internal sites work. The wifi access point is attached to a 3Com 4200 switch, with the port set for vlan 2 untagged, vlan 1 tagged. The 4200 has a fiber connection to a 3Com 4900SX fiber switch that acts almost as a router here. The fiber connection is vlan 1 untagged vlan 2 tagged at both ends. The gateway is then attached to a different 4200 (vlan 1 untagged, vlan 2 tagged) that has a similar fiber connection to the 4900SX. vlan 2 has 192.168.8.0/22 IPs, vlan 1 has 10.1.0.0/16 IPs. The 4900SX has an interface for both vlans (10.1.1.1/192.168.8.1), as does the gateway (10.1.1.5/192.168.8.5). There is one dchp server for both vlans on the same switch as the gateway. It chooses a dhcp scope based on the interface used by the 4900sx to forward the dhcp request. There is also a network access list on the 4900sx set to deny all vlan2 traffic to any 10.1.x.x host, with exceptions made for a few servers, including dhcp, 4900sx, and the gateway. I think that about covers it. Any ideas on why internet access would be delayed like this?

    Read the article

  • Wake-on-lan only works so many times

    - by Chance
    I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

    Read the article

  • ls -l freezes terminal locally and remotely

    - by Jakobud
    I've been reading other SF threads regarding ls not returning results or freezing and stalling terminal sessions and it appears they usually the fault of network problems. My problem however, occurs both over remote SSH sessions but also if I am physically at the server itself... I just installed CentOS 5.4 on one of our servers. I'm setting up some rdiff-backup scripts and when I downloaded librsync and untared it, thats when I started seeing some weird behavior with ls -l. wget http://sourceforge.net/projects/librsync/files/librsync/0.9.7/librsync-0.9.7.tar.gz/download /tmp cd /tmp tar -xzf librsync-0.9.7.tar.gz Simple enough. To view the files in this directory I did this: ls results: librsync-0.9.7 librsync-0.9.7.tar.gz Now, if I ls -l, my terminal freezes. I have to re-ssh in to keep going. After reading SF threads, I thought it was network related. So I was extremely surprised to go sit down at the server itself and see the exact same thing happen... So its obviously not a network issues. Even if I ls /tmp/librsync-0.9.7, my terminal freezes just the same... Next I did an strace and got this (warning: wall of text coming....): strace ls -l /tmp execve("/bin/ls", ["ls", "-l", "/tmp"], [/* 21 vars */]) = 0 brk(0) = 0x1c521000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cc0000 uname({sys="Linux", node="massive.answeron.com", ...}) = 0 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=71746, ...}) = 0 mmap(NULL, 71746, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2b8582cc1000 close(3) = 0 open("/lib64/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \"\200\2730\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=53448, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cd3000 mmap(0x30bb800000, 2132936, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bb800000 mprotect(0x30bb807000, 2097152, PROT_NONE) = 0 mmap(0x30bba07000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x30bba07000 close(3) = 0 open("/lib64/libacl.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\31@\2740\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=28008, ...}) = 0 mmap(0x30bc400000, 2120992, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bc400000 mprotect(0x30bc406000, 2093056, PROT_NONE) = 0 mmap(0x30bc605000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0x30bc605000 close(3) = 0 open("/lib64/libselinux.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`E\300\2730\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=95464, ...}) = 0 mmap(0x30bbc00000, 2192784, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bbc00000 mprotect(0x30bbc15000, 2097152, PROT_NONE) = 0 mmap(0x30bbe15000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x30bbe15000 mmap(0x30bbe17000, 1424, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x30bbe17000 close(3) = 0 open("/lib64/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220\332\201\2720\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=1717800, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cd4000 mmap(0x30ba800000, 3498328, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30ba800000 mprotect(0x30ba94d000, 2097152, PROT_NONE) = 0 mmap(0x30bab4d000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14d000) = 0x30bab4d000 mmap(0x30bab52000, 16728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x30bab52000 close(3) = 0 open("/lib64/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220W\0\2730\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=145824, ...}) = 0 mmap(0x30bb000000, 2204528, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bb000000 mprotect(0x30bb016000, 2093056, PROT_NONE) = 0 mmap(0x30bb215000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x30bb215000 mmap(0x30bb217000, 13168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x30bb217000 close(3) = 0 open("/lib64/libattr.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\17\300\2750\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=17888, ...}) = 0 mmap(0x30bdc00000, 2110728, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bdc00000 mprotect(0x30bdc04000, 2093056, PROT_NONE) = 0 mmap(0x30bde03000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x30bde03000 close(3) = 0 open("/lib64/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20\16\300\2720\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=23360, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cd5000 mmap(0x30bac00000, 2109696, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bac00000 mprotect(0x30bac02000, 2097152, PROT_NONE) = 0 mmap(0x30bae02000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x30bae02000 close(3) = 0 open("/lib64/libsepol.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0=\0\2740\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=247496, ...}) = 0 mmap(0x30bc000000, 2383136, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bc000000 mprotect(0x30bc03b000, 2097152, PROT_NONE) = 0 mmap(0x30bc23b000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3b000) = 0x30bc23b000 mmap(0x30bc23c000, 40224, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x30bc23c000 close(3) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cd6000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cd7000 arch_prctl(ARCH_SET_FS, 0x2b8582cd6c50) = 0 mprotect(0x30bba07000, 4096, PROT_READ) = 0 mprotect(0x30bab4d000, 16384, PROT_READ) = 0 mprotect(0x30bb215000, 4096, PROT_READ) = 0 mprotect(0x30ba61b000, 4096, PROT_READ) = 0 mprotect(0x30bae02000, 4096, PROT_READ) = 0 munmap(0x2b8582cc1000, 71746) = 0 set_tid_address(0x2b8582cd6ce0) = 24102 set_robust_list(0x2b8582cd6cf0, 0x18) = 0 futex(0x7fff72d02d6c, FUTEX_WAKE_PRIVATE, 1) = 0 rt_sigaction(SIGRTMIN, {0x30bb005370, [], SA_RESTORER|SA_SIGINFO, 0x30bb00e7c0}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x30bb0052b0, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x30bb00e7c0}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=10240*1024, rlim_max=RLIM_INFINITY}) = 0 access("/etc/selinux/", F_OK) = 0 brk(0) = 0x1c521000 brk(0x1c542000) = 0x1c542000 open("/etc/selinux/config", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=448, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cc1000 read(3, "# This file controls the state o"..., 4096) = 448 read(3, "", 4096) = 0 close(3) = 0 munmap(0x2b8582cc1000, 4096) = 0 open("/proc/mounts", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cc1000 read(3, "rootfs / rootfs rw 0 0\n/dev/root"..., 4096) = 577 close(3) = 0 munmap(0x2b8582cc1000, 4096) = 0 open("/selinux/mls", O_RDONLY) = 3 read(3, "1", 19) = 1 close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 connect(3, {sa_family=AF_FILE, path="/var/run/setrans/.setrans-unix"...}, 110) = 0 sendmsg(3, {msg_name(0)=NULL, msg_iov(5)=[{"\1\0\0\0", 4}, {"\1\0\0\0", 4}, {"\1\0\0\0", 4}, {"\0", 1}, {"\0", 1}], msg_controllen=0, msg_flags=0}, MSG_NOSIGNAL) = 14 readv(3, [{"\1\0\0\0", 4}, {"\1\0\0\0", 4}, {"\0\0\0\0", 4}], 3) = 12 readv(3, [{"\0", 1}], 1) = 1 close(3) = 0 open("/usr/lib/locale/locale-archive", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=56413824, ...}) = 0 mmap(NULL, 56413824, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2b8582cd8000 close(3) = 0 ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=65, ws_col=137, ws_xpixel=0, ws_ypixel=0}) = 0 open("/usr/share/locale/locale.alias", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2528, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(3, "# Locale name alias data base.\n#"..., 4096) = 2528 read(3, "", 4096) = 0 close(3) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/usr/share/locale/en_US.UTF-8/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.utf8/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.UTF-8/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.utf8/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) lstat("/tmp", {st_mode=S_IFDIR|S_ISVTX|0777, st_size=4096, ...}) = 0 getxattr("/tmp", "system.posix_acl_access", 0x0, 0) = -1 ENODATA (No data available) getxattr("/tmp", "system.posix_acl_default", 0x0, 0) = -1 ENODATA (No data available) socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=1711, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1711 read(3, "", 4096) = 0 close(3) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=71746, ...}) = 0 mmap(NULL, 71746, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2b85862a5000 close(3) = 0 open("/lib64/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\37\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=53880, ...}) = 0 mmap(NULL, 2139432, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2b85862b7000 mprotect(0x2b85862c1000, 2093056, PROT_NONE) = 0 mmap(0x2b85864c0000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9000) = 0x2b85864c0000 close(3) = 0 mprotect(0x2b85864c0000, 4096, PROT_READ) = 0 munmap(0x2b85862a5000, 71746) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl(3, F_GETFD) = 0 fcntl(3, F_SETFD, FD_CLOEXEC) = 0 fstat(3, {st_mode=S_IFREG|0644, st_size=1823, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1823 close(3) = 0 munmap(0x2b85862a5000, 4096) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/group", O_RDONLY) = 3 fcntl(3, F_GETFD) = 0 fcntl(3, F_SETFD, FD_CLOEXEC) = 0 fstat(3, {st_mode=S_IFREG|0644, st_size=743, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(3, "root:x:0:root\nbin:x:1:root,bin,d"..., 4096) = 743 close(3) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/tmp", O_RDONLY|O_NONBLOCK|O_DIRECTORY) = 3 fcntl(3, F_SETFD, FD_CLOEXEC) = 0 getdents(3, /* 8 entries */, 32768) = 264 lstat("/tmp/librsync-0.9.7.tar.gz", {st_mode=S_IFREG|0644, st_size=453802, ...}) = 0 getxattr("/tmp/librsync-0.9.7.tar.gz", "system.posix_acl_access", 0x0, 0) = -1 ENODATA (No data available) getxattr("/tmp/librsync-0.9.7.tar.gz", "system.posix_acl_default", 0x0, 0) = -1 ENODATA (No data available) lstat("/tmp/librsync-0.9.7", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0 getxattr("/tmp/librsync-0.9.7", "system.posix_acl_access", 0x0, 0) = -1 ENODATA (No data available) getxattr("/tmp/librsync-0.9.7", "system.posix_acl_default", 0x0, 0) = -1 ENODATA (No data available) open("/etc/passwd", O_RDONLY) = 4 fcntl(4, F_GETFD) = 0 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=1823, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1823 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=71746, ...}) = 0 mmap(NULL, 71746, PROT_READ, MAP_PRIVATE, 4, 0) = 0x2b85862a5000 close(4) = 0 open("/lib64/libnss_ldap.so.2", O_RDONLY) = 4 read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300r\4\0\0\0\0\0"..., 832) = 832 fstat(4, {st_mode=S_IFREG|0755, st_size=3169960, ...}) = 0 mmap(NULL, 5329912, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x2b85864c2000 mprotect(0x2b858679e000, 2093056, PROT_NONE) = 0 mmap(0x2b858699d000, 176128, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x2db000) = 0x2b858699d000 mmap(0x2b85869c8000, 62456, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2b85869c8000 close(4) = 0 open("/lib64/libcom_err.so.2", O_RDONLY) = 4 read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\n\300\2770\0\0\0"..., 832) = 832 fstat(4, {st_mode=S_IFREG|0755, st_size=10000, ...}) = 0 mmap(0x30bfc00000, 2103048, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x30bfc00000 mprotect(0x30bfc02000, 2093056, PROT_NONE) = 0 mmap(0x30bfe01000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x1000) = 0x30bfe01000 close(4) = 0 open("/lib64/libkeyutils.so.1", O_RDONLY) = 4 read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\n@\2760\0\0\0"..., 832) = 832 fstat(4, {st_mode=S_IFREG|0755, st_size=9472, ...}) = 0 mmap(0x30be400000, 2102416, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x30be400000 mprotect(0x30be402000, 2093056, PROT_NONE) = 0 mmap(0x30be601000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x1000) = 0x30be601000 close(4) = 0 open("/lib64/libresolv.so.2", O_RDONLY) = 4 read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\2402\0\2760\0\0\0"..., 832) = 832 fstat(4, {st_mode=S_IFREG|0755, st_size=92736, ...}) = 0 mmap(0x30be000000, 2181864, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x30be000000 mprotect(0x30be011000, 2097152, PROT_NONE) = 0 mmap(0x30be211000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x11000) = 0x30be211000 mmap(0x30be213000, 6888, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x30be213000 close(4) = 0 mprotect(0x30be211000, 4096, PROT_READ) = 0 munmap(0x2b85862a5000, 71746) = 0 rt_sigaction(SIGPIPE, {0x1, [], SA_RESTORER, 0x30ba8302d0}, {SIG_DFL, [], 0}, 8) = 0 geteuid() = 0 futex(0x2b85869c7708, FUTEX_WAKE_PRIVATE, 2147483647) = 0 open("/etc/ldap.conf", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=9119, ...}) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=9119, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "# @(#)$Id: ldap.conf,v 1.38 2006"..., 4096) = 4096 read(4, "Use the OpenLDAP password change"..., 4096) = 4096 read(4, " OpenLDAP 2.0 and earlier is \"no"..., 4096) = 927 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 uname({sys="Linux", node="massive.answeron.com", ...}) = 0 open("/etc/resolv.conf", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=107, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "; generated by /sbin/dhclient-sc"..., 4096) = 107 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 4 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(4) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 4 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(4) = 0 open("/etc/host.conf", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=17, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "order hosts,bind\n", 4096) = 17 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 futex(0x30bab54d44, FUTEX_WAKE_PRIVATE, 2147483647) = 0 open("/etc/hosts", O_RDONLY) = 4 fcntl(4, F_GETFD) = 0 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=187, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "# Do not remove the following li"..., 4096) = 187 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=71746, ...}) = 0 mmap(NULL, 71746, PROT_READ, MAP_PRIVATE, 4, 0) = 0x2b85862a5000 close(4) = 0 open("/lib64/libnss_dns.so.2", O_RDONLY) = 4 read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\17\0\0\0\0\0\0"..., 832) = 832 fstat(4, {st_mode=S_IFREG|0755, st_size=23736, ...}) = 0 mmap(NULL, 2113792, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x2b85869d8000 mprotect(0x2b85869dc000, 2093056, PROT_NONE) = 0 mmap(0x2b8586bdb000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x3000) = 0x2b8586bdb000 close(4) = 0 mprotect(0x2b8586bdb000, 4096, PROT_READ) = 0 munmap(0x2b85862a5000, 71746) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4 connect(4, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, 28) = 0 fcntl(4, F_GETFL) = 0x2 (flags O_RDWR) fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 gettimeofday({1276265920, 823870}, NULL) = 0 poll([{fd=4, events=POLLOUT}], 1, 0) = 1 ([{fd=4, revents=POLLOUT}]) sendto(4, "C\v\1\0\0\1\0\0\0\0\0\0\7massive\10answeron\3co"..., 38, MSG_NOSIGNAL, NULL, 0) = 38 poll([{fd=4, events=POLLIN}], 1, 5000) = 1 ([{fd=4, revents=POLLIN}]) ioctl(4, FIONREAD, [122]) = 0 recvfrom(4, "C\v\205\200\0\1\0\1\0\2\0\2\7massive\10answeron\3co"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, [16]) = 122 close(4) = 0 open("/etc/openldap/ldap.conf", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=335, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "#\n# LDAP Defaults\n#\n\n# See ldap."..., 4096) = 335 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 getuid() = 0 geteuid() = 0 getgid() = 0 getegid() = 0 open("/root/ldaprc", O_RDONLY) = -1 ENOENT (No such file or directory) open("/root/.ldaprc", O_RDONLY) = -1 ENOENT (No such file or directory) stat("/etc/ldap.conf", {st_mode=S_IFREG|0644, st_size=9119, ...}) = 0 geteuid() = 0 brk(0x1c566000) = 0x1c566000 open("/etc/hosts", O_RDONLY) = 4 fcntl(4, F_GETFD) = 0 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=187, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "# Do not remove the following li"..., 4096) = 187 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/etc/hosts", O_RDONLY) = 4 fcntl(4, F_GETFD) = 0 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=187, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "# Do not remove the following li"..., 4096) = 187 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4 connect(4, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, 28) = 0 fcntl(4, F_GETFL) = 0x2 (flags O_RDWR) fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 gettimeofday({1276265920, 855948}, NULL) = 0 poll([{fd=4, events=POLLOUT}], 1, 0) = 1 ([{fd=4, revents=POLLOUT}]) sendto(4, "\32 \1\0\0\1\0\0\0\0\0\0\4ldap\10answeron\3com\0\0"..., 35, MSG_NOSIGNAL, NULL, 0) = 35 poll([{fd=4, events=POLLIN}], 1, 5000) = 1 ([{fd=4, revents=POLLIN}]) ioctl(4, FIONREAD, [104]) = 0 recvfrom(4, "\32 \205\200\0\1\0\1\0\1\0\0\4ldap\10answeron\3com\0\0"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, [16]) = 104 close(4) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4 connect(4, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, 28) = 0 fcntl(4, F_GETFL) = 0x2 (flags O_RDWR) fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 gettimeofday({1276265920, 858536}, NULL) = 0 poll([{fd=4, events=POLLOUT}], 1, 0) = 1 ([{fd=4, revents=POLLOUT}]) sendto(4, "I\375\1\0\0\1\0\0\0\0\0\0\4ldap\10answeron\3com\0\0"..., 35, MSG_NOSIGNAL, NULL, 0) = 35 poll([{fd=4, events=POLLIN}], 1, 5000) = 1 ([{fd=4, revents=POLLIN}]) ioctl(4, FIONREAD, [139]) = 0 recvfrom(4, "I\375\205\200\0\1\0\2\0\2\0\2\4ldap\10answeron\3com\0\0"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, [16]) = 139 close(4) = 0 socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 4 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 setsockopt(4, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 fcntl(4, F_GETFL) = 0x2 (flags O_RDWR) fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(4, {sa_family=AF_INET, sin_port=htons(389), sin_addr=inet_addr("10.20.0.30")}, 16) = -1 EINPROGRESS (Operation now in progress) poll([{fd=4, events=POLLOUT|POLLERR|POLLHUP}], 1, 120000 And thats where it stops, right there after that last 120000.... Using strace, I can obviously CTRL+C to keep going. But like I said, normally the terminal completely freezes. Anyone have any clues?

    Read the article

  • NBX v3001 new phone account: all incoming calls directly diverted to voicemail

    - by Pitto
    That's my problem: I've added a new user in our NBX v3001 3com (now hp) and all the incoming calls are diverted, without ringing, to the voicemail. The phone is a Sip Endpoint Terminal and I really don't have a clue why this is happening since I've installed other identical phones without troubles. I've also tried deleting and re-adding the user and changing the extension: nothing. Any hints to solve?

    Read the article

  • Steps to diagnose SNU5600 disconnection problem

    - by Rich
    I have a Philips SNU5600 WiFi dongle plugged into two machines (ie I have two SNU5600 dongles, one in each machine). One machine is running 10.10 and the other is running Linux Mint. The dongles work absolutely fine, except if I do a lot of file transfers to a NAS attached to the wireless router. After a while the connection to the router will go. To get the connection back I either need to run sudo /etc/init.d/networking restart or I need to unplug and plug in again the dongle. Otherwise the dongle works fine (web browsing, streaming, etc). Output of lsusb: Bus 002 Device 003: ID 0471:1236 Philips (or NXP) SNU5600 802.11bg Output of lsusb -v at http://pastebin.com/dXYKkF01 What steps should I take next to resolve this? Is it a known problem? Could it be the router? It is a 3Com "OfficeConnect Wireless 11g Cable/DSL Gateway Version 1.02.15".

    Read the article

  • Recommendation for Ethernet switches that allow arbitrary network topologies

    - by sblair
    We have the following requirements for three Ethernet switches that will be connected together: Allow the switches to connect together to form dynamic, arbitrary topologies, i.e., support for the RSTP is essential. Allow the physical topology (which ports are connected together) to be gleaned from the switches, e.g., using SNMP traps. This is optional, but would be very useful. At least 5 ports on each switch, but only 3 will be used for connecting the switches together. Be as compact as possible. Ideally be in stock, in the UK. Only 100Mb/s is required. (This question is the result of the lack of RSTP support from 3Com NJ225 devices, as described in my previous question.)

    Read the article

  • Problems with wireless file copy - hangs during copy

    - by Eran Kampf
    I have this problem on my home network where when I try to copy files via wireless connection, at some point the copy fails and the machine doing the copy loses connection to the network. I'm pretty much lost as to figuring out the source for the problem... Some more details that might help: It's not OS related. I have Windows 7 machines and Leopard machines and this occurs on both I'm using a 3com OfficeConnect router Wired transfer works fine Other programs that require heavy wireless traffic work just fine:streaming large HD movies, Xbox Live! ... I'm lost as to how to even begin trying to diagnose the problem so any tips are welcome...

    Read the article

  • network design to segregate public and staff

    - by barb
    My current setup has: a pfsense firewall with 4 NICs and potential for a 5th 1 48 port 3com switch, 1 24 port HP switch, willing to purchase more subnet 1) edge (Windows Server 2003 for vpn through routing and remote access) and subnet 2) LAN with one WS2003 domain controller/dns/wins etc., one WS2008 file server, one WS2003 running Vipre anti-virus and Time Limit Manager which controls client computer use, and about 50 pcs I am looking for a network design for separating clients and staff. I could do two totally isolated subnets, but I'm wondering if there is anything in between so that staff and clients could share some resources such as printers and anti-virus servers, staff could access client resources, but not vice versa. I guess what I'm asking is can you configure subnets and/or vlans like this: 1)edge for vpn 2)services available to all other internal networks 3)staff which can access services and clients 4)clients which can access services but not staff By access/non-access, I mean stronger separation than domain usernames and passwords.

    Read the article

  • Two network cards in one Windows 7 PC

    - by Martin
    Hi, I've upgraded from Vista to Windows 7. On Vista I used to run one network card (Intel 82566DC -2 Gigabit) for my internet which was connected to a Dovado USB mobile broadband router connected to a 3G modem. The IP setup on the card is set on DHCP. The second card (3com Ethernet link) was used to connect to our town's local WUG (wireless user group) and all worked fine. Now the problem I have with Windows 7 is that when I connect to the internet with the (Intel) first card, the internet work fine but as soon as I connect the second card to the wug my internet drops. If I then disconnect the first card (internet one) and try to connect to the wug it works. It seems that the two cards are fighting each other. Is there maybe something I can do to fix the problem? As you probably can gather from this post is that I am not an expert on PC's so please if you do answer do I in simple terms. :) Thanks, Martin

    Read the article

  • partition alignment on fresh windows 2003 ent server

    - by Datapimp23
    Hi, I have this server which has it's physical disks in RAID 5 controlled by a 3com raid controller. size of the stripe unit is unknown for the moment (Can check tomorrow in the office). I need to install windows server 2003 ENT and create 2 partitions (OS, Data). I'd like to create the partitions before the installation on windows server. They have to be aligned properly. I have the newest version of gparted on a disc but I have no clue if this is the right tool. Can someone point me in the right direction? Thanks

    Read the article

1 2  | Next Page >