Search Results

Search found 275 results on 11 pages for 'ata'.

Page 1/11 | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >

• ata error: UnrecovData Handshk

  - by Aaron Digulla

  I just saw this message in my log (openSUSE 11.3, Linux 2.6.36.2): ata6.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen ata6.00: irq_stat 0x08000000, interface fatal error ata6: SError: { UnrecovData Handshk } ata6.00: failed command: WRITE FPDMA QUEUED ata6.00: cmd 61/58:00:9f:69:00/00:00:00:00:00/40 tag 0 ncq 45056 out res 40/00:04:9f:69:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) ata6.00: status: { DRDY } ata6: hard resetting link ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: configured for UDMA/133 ata6: EH complete Two questions: Which disk caused the error? I search /sys and /proc but couldn't find a way to map ata6 to a device (/dev/sdaXY) When such an error happens, does Linux retry the disk operation? Or do I have a corrupt filesystem?

  Read the article

• LBA48 in Linux SCSI ATA Passthrough

  - by Ben Englert

  I am writing a custom disk monitoring/diagnostics app which, among other things, needs to do stuff to SATA disks behind a SAS PCI card under Linux. So far I am following this guide as well as the example code in sg_utils to pass ATA taskfiles through the SCSI layer. Seems to be working okay. However, in both cases, the CDB data structure (pointed to by the cmdp member of the sg_io argument to the ioctl) has only one unsigned char worth of space for the number of sectors. If you look at the ata_taskfile structure in linux\ata.h you'll see that it has an "nsect" and a "hob_nsect" field - high order bits for the sector count, to support LBA48. It turns out that in my application I need LBA48 support. So, anyone know how to set up an sg_io_hdr structure with an LBA48 sector count?

  Read the article

• After upgrade to xubuntu 12.10 I have 2 mount points for each partition

  - by TiGR

  Just upgraded Xubuntu 12.04 to 12.10 (both XFCE and LXDE desktops are being used at this system). Now I have 2 mount points for each partition. It looks like this: It appears this way in both Thunar and PCManFM. However, there are no dupes in Nautilus. $ ls /dev/disk/by-id/ ata-ST320410A_5FB3MA76 ata-ST3250620A_9RT030B0-part3 scsi-SATA_ST320410A_5FB3MA76-part1 scsi-SATA_ST3250620A_9RT030B0-part4 ata-ST320410A_5FB3MA76-part1 ata-ST3250620A_9RT030B0-part4 scsi-SATA_ST320410A_5FB3MA76-part2 scsi-SATA_ST3250620A_9RT030B0-part5 ata-ST320410A_5FB3MA76-part2 ata-ST3250620A_9RT030B0-part5 scsi-SATA_ST320410A_5FB3MA76-part3 scsi-SATA_ST3250620A_9RT030B0-part6 ata-ST320410A_5FB3MA76-part3 ata-ST3250620A_9RT030B0-part6 scsi-SATA_ST3250620A_9RT030B0 scsi-SATA_ST3250620A_9RT030B0-part7 ata-ST3250620A_9RT030B0 ata-ST3250620A_9RT030B0-part7 scsi-SATA_ST3250620A_9RT030B0-part1 scsi-SATA_ST3250620A_9RT030B0-part8 ata-ST3250620A_9RT030B0-part1 ata-ST3250620A_9RT030B0-part8 scsi-SATA_ST3250620A_9RT030B0-part2 ata-ST3250620A_9RT030B0-part2 scsi-SATA_ST320410A_5FB3MA76 scsi-SATA_ST3250620A_9RT030B0-part3 $ ls /dev/disk/by-uuid/ 01CD9E239FDF54F0 5299-430B 8824C9E324C9D3FA b05c582e-77df-4b83-8a75-17db1ab5dbc1 09a9cf9e-6af4-45ed-a9ac-782c764fe8d1 6bbd501e-7601-4ee7-b725-d3ec7f19f149 8B7C-BAF8 f54ee301-4bd4-40e3-a9fb-75ca79c05974 50366CC66E8BA293 8553dc4a-5d63-4078-9be3-ea91a46d8c67 a5be1bcd-b7c6-4273-8ade-eb9cce15504d There are no SCSI drives in this system. What could cause this problem? Is it a bug?

  Read the article

• mount old ATA disk to USB adapter

  - by 213441265152351

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic USB-IDE, an ATA adapter to USB 1.0 similar to the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. Any ideas?

  Read the article

• scsi and ata entries for same hard drive under /dev/disk/by-id

  - by John Dibling

  I am trying to set up a ZFS pool using 4 bare drives which I have attached to my Ubuntu system via a SATA hot swap backplane. These are Hitachi SATA drives. When I list the contents of /dev/disk/by-id, I see two entries for each drive: root@scorpius:/dev/disk/by-id# ls | grep Hitachi ata-Hitachi_HDS5C3030ALA630_MJ1323YNG0ZJ7C ata-Hitachi_HDS5C3030ALA630_MJ1323YNG1064C ata-Hitachi_HDS5C3030ALA630_MJ1323YNG190AC ata-Hitachi_HDS5C3030ALA630_MJ1323YNG1DGPC scsi-SATA_Hitachi_HDS5C30_MJ1323YNG0ZJ7C scsi-SATA_Hitachi_HDS5C30_MJ1323YNG1064C scsi-SATA_Hitachi_HDS5C30_MJ1323YNG190AC scsi-SATA_Hitachi_HDS5C30_MJ1323YNG1DGPC I know these are the same drives because I wrote down the serial numbers, and all the other drives in this system are either Seagate or WD. The serial number for the first one, for example, is YNG0ZJ7C. Why are there two entries here for each drive? More to the point, when I create my ZFS pool which one should I use; the scsi- one or the ata- one?

  Read the article

• Replacing an ATA-100 hard drive

  - by Pieter

  I was instructed to replace the hard drive in an old laptop, a Dell Latitude D505. I'm suspecting that there was a head crash when someone moved the laptop while it was turned on. In the specifications, I found this about the hard drive: 30GB ATA-100; (4200RPM); 40GB ATA-100 (5400RPM); 60GB ATA-100 (4200RPM) *Optional 40GB (5400) 2nd HDD Module for media bay I'm familiar with SATA and IDE, but ATA-100 doesn't ring a bell. What do I have to take into account when I go look for a replacement hard drive?

  Read the article

• Software that supports ATA Secure Erase Command

  - by vy32

  We have a lot of drives that need to be sanitized. NIST SP 800-88 recommends software that uses the ATA Secure Erase command. That's apparently the only way to be sure that the drive is properly wiped, due to bad-block remapping and such. I know that this functionality is available in hdparm. The problem with that approach is that it is inconsistent on multiple platforms, occasionally times out, doesn't have error-checking logic, and doesn't check the resulting drive to make sure that it has, in fact, been erased. So a proper program might use hdparm, but hdparm by itself isn't an answer. I'm looking for open source software that implements ATA Secure Erase. Ideally it will be a bootable disk image like DBAN, but it will use the ATA command.

  Read the article

• Is a disk/ata timeout exception dangerous?

  - by j-g-faustus

  I have a few hard drives in mdadm RAID 5 configured to go to standby after a few minutes of inactivity. (Using hdparm.conf spindown_time.) At irregular intervals I get messages like these in dmesg: [ 1840.251661] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1840.251722] ata4.00: failed command: SMART [ 1840.251758] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 1840.251759] res 40/00:14:50:2e:04/00:00:02:00:00/40 Emask 0x4 (timeout) [ 1840.251858] ata4.00: status: { DRDY } [ 1840.251888] ata4: hard resetting link [ 1840.600742] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1840.601521] ata4.00: configured for UDMA/133 [ 1840.601547] ata4: EH complete [337877.713988] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [337877.714019] ata4.00: failed command: SMART [337877.714038] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [337877.714039] res 40/00:04:90:10:81/00:00:00:00:00/40 Emask 0x4 (timeout) [337877.714089] ata4.00: status: { DRDY } [337877.714107] ata4: hard resetting link [337878.063085] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [337878.063743] ata4.00: configured for UDMA/133 [337878.063764] ata4: EH complete I think the exception is caused by smartd when a drive does not wake up quickly enough. There are no issues (that I can tell) in accessing the drives normally through the file system - it takes a few seconds longer than normal when they are asleep, but there are no exceptions. Is this something I should worry about, as a potential symptom on something that could corrupt a drive over time? Or can I safely ignore it as part of normal operation? Edit: By request: smartctl -a for sdaand sde, both disks are members of the array. If ata4is the same as scsi-4 then sde is the one that gave the error above, according to /dev/disk/by-path.

  Read the article

• Appropriate USB enclosure to use with an Ultra ATA drive

  - by Topdown

  I have a friend with a broken iBook, but we wish to recover the hard disk. I haven't seen the drive itself, however the spec lists it as an "Ultra ATA drive". Could you please advise if this is 100% compatible with any standard USB IDE 2.5inch enclosure? Full spec: iBook 12" 1GHz(AP) 256MB DDR266 SDRAM built-in Keyboard/Mac OS X Bluetooth Module 40GB Ultra ATA drive Combo (DVD-ROM/CD-RW).

  Read the article

• What does Embedded SATA Controller : ATA mean?

  - by paulH

  I have a Poweredge R510 server with a PERC H700 Integrated RAID controller that is exhibiting slower than expected disk speeds (RAID 1 and RAID 10 arrays) and I'm looking at the configuration of the server. Running the command omreport chassis biossetup on the server shows me the following configuration setting: Embedded SATA Controller : ATA I can also see that the possible options for this setting are: off | ata | qdma | raid I've been looking online to find out what this setting means and what the various options refer to but I've been unable to find anything particularly helpful, so I was hoping that somebody here could help to enlighten me. Thanks, Paul.

  Read the article

• linux: mount old ATA disk to USB adapter

  - by 130490868091234

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic Corp. SL11R-IDE IDE Bridge (04ce:0002), an ATA adapter to USB 1.0 like the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. I get different devices under, for example: /dev/bus/usb/003/002 or /dev/bus/usb/002/004, but I don't get any /dev/sdbN links. The output blkid -o list -c /dev/null is just the laptop's partitions. I have tried taking out the jumper, putting it as master and as CS Enabled, but didn't change the result. Any ideas?

  Read the article

• Using an ATA-100 Hard Drive with a Thermaltake BlacX External Hard Drive Dock

  - by Joe

  Is it possible for a Thermaltake BlacX HDD Dock to connect to and recognize an ATA-100 Hard Drive? I know that the specifications for the BlacX say that it only supports SATA & SATAII, but I was hoping for one of three things: 1) for it to still work even though it isn't supported 2) for there to be some sort of workaround to make this possible 3) for there to be another part of some sort that I could purchase to make this work

  Read the article

• Using an ATA-100 Hard Drive with a Thermaltake BlacX External Hard Drive Dock

  - by Joe

  Is it possible for a Thermaltake BlacX HDD Dock to connect to and recognize an ATA-100 Hard Drive? I know that the specifications for the BlacX say that it only supports SATA & SATAII, but I was hoping for one of three things: 1) for it to still work even though it isn't supported 2) for there to be some sort of workaround to make this possible 3) for there to be another part of some sort that I could purchase to make this work

  Read the article

• telephone sockets connecting them to an ATA

  - by ageis23

  We have many extension sockets in the house therefore be fairly expensive to buy an ata for each phone. Since extension sockets are daisy chained together, could I just plug it into the FXS socket instead of the BT master socket? Or is the FXS port strictly for one phone only?

  Read the article

• Hard drives (SATA/ATA) corrupting

  - by JC Denton

  Hello All, 2 years ago I bought relatives a new computer for christmas and installed Ubuntu on it. Ever since then it has been experiencing problems with the hard drives. The hard drive supplied with the machine was a SATA drive. When it appeared it was having problems (files and folders with invalid encoding started appearing) I replaced the SATA drive with the drive of their previous computer. I replaced it (The replacement) later on, the drive being rather old and thus becoming more prone to the risk of failure. The replacement drive is a IDE drive but the same problems started to appear (files and folders showing up in nautilus with invalid encoding). I fear the files and folders that are showing are existing FS entries, starting to corrupt. As it's happening to both the IDE and SATA drive it's unlikely to be the drives themselves or the IDE/SATA controller, I believe. Any ideas as to what could be causing the (assumed) corruption? EDIT: You're right about the paragraphs. They were there in edit mode but I'm still getting to grips with the whitespace format codes. The system is a "Primo Pro" AMD Phenom II X4 Quad Core 920 2.80GHz SILENT DDR2, ordered from overclockers.co.uk and nothing has been added to it except for the replacement of the SATA drive with an AMD drive. It would seem unlikely for a barebones system to be underpowered.

  Read the article

• Connect a ssd externally such that hdparm is fully supported

  - by student

  I am just trying some hdparm magic with my new ssd (samsung 840 pro). However I don't want to change my drive over and over so it would be great if I could connect it externally to my laptop. I have a cheap sata-usb Adapter, but I feel it doesn't support the ATA commands send by hdparm. So what's the best way to do this? Are there sata-usb Adapters which fully support the hdparm things? Would it be a good idea to buy a sata-esata adapter to get full control over the drive?

  Read the article

• Upgraded Ubuntu, all drives in one zpool marked unavailable

  - by Matt Sieker

  I just upgraded Ubuntu 14.04, and I had two ZFS pools on the server. There was some minor issue with me fighting with the ZFS driver and the kernel version, but that's worked out now. One pool came online, and mounted fine. The other didn't. The main difference between the tool is one was just a pool of disks (video/music storage), and the other was a raidz set (documents, etc) I've already attempted exporting and re-importing the pool, to no avail, attempting to import gets me this: root@kyou:/home/matt# zpool import -fFX -d /dev/disk/by-id/ pool: storage id: 15855792916570596778 state: UNAVAIL status: One or more devices contains corrupted data. action: The pool cannot be imported due to damaged devices or data. see: http://zfsonlinux.org/msg/ZFS-8000-5E config: storage UNAVAIL insufficient replicas raidz1-0 UNAVAIL insufficient replicas ata-SAMSUNG_HD103SJ_S246J90B134910 UNAVAIL ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523 UNAVAIL ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969 UNAVAIL The symlinks for those in /dev/disk/by-id also exist: root@kyou:/home/matt# ls -l /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910* /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51* lrwxrwxrwx 1 root root 9 May 27 19:31 /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910 -> ../../sdb lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910-part9 -> ../../sdb9 lrwxrwxrwx 1 root root 9 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523 -> ../../sdd lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523-part9 -> ../../sdd9 lrwxrwxrwx 1 root root 9 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969 -> ../../sde lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969-part1 -> ../../sde1 lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969-part9 -> ../../sde9 Inspecting the various /dev/sd* devices listed, they appear to be the correct ones (The 3 1TB drives that were in a raidz array). I've run zdb -l on each drive, dumping it to a file, and running a diff. The only difference on the 3 are the guid fields (Which I assume is expected). All 3 labels on each one are basically identical, and are as follows: version: 5000 name: 'storage' state: 0 txg: 4 pool_guid: 15855792916570596778 hostname: 'kyou' top_guid: 1683909657511667860 guid: 8815283814047599968 vdev_children: 1 vdev_tree: type: 'raidz' id: 0 guid: 1683909657511667860 nparity: 1 metaslab_array: 33 metaslab_shift: 34 ashift: 9 asize: 3000569954304 is_log: 0 create_txg: 4 children[0]: type: 'disk' id: 0 guid: 8815283814047599968 path: '/dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910-part1' whole_disk: 1 create_txg: 4 children[1]: type: 'disk' id: 1 guid: 18036424618735999728 path: '/dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523-part1' whole_disk: 1 create_txg: 4 children[2]: type: 'disk' id: 2 guid: 10307555127976192266 path: '/dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969-part1' whole_disk: 1 create_txg: 4 features_for_read: Stupidly, I do not have a recent backup of this pool. However, the pool was fine before reboot, and Linux sees the disks fine (I have smartctl running now to double check) So, in summary: I upgraded Ubuntu, and lost access to one of my two zpools. The difference between the pools is the one that came up was JBOD, the other was zraid. All drives in the unmountable zpool are marked UNAVAIL, with no notes for corrupted data The pools were both created with disks referenced from /dev/disk/by-id/. Symlinks from /dev/disk/by-id to the various /dev/sd devices seems to be correct zdb can read the labels from the drives. Pool has already been attempted to be exported/imported, and isn't able to import again. Is there some sort of black magic I can invoke via zpool/zfs to bring these disks back into a reasonable array? Can I run zpool create zraid ... without losing my data? Is my data gone anyhow?

  Read the article

• How do hdparm's -S and -B options interact?

  - by user697683

  These two options seem confusing. For example: according to the man page -B 254 "does not permit spin-down". However, testing with -B 254 -S 1 the drive does spin down after 5 seconds. -B Query/set Advanced Power Management feature, if the drive supports it. A low value means aggressive power management and a high value means better performance. Possible settings range from values 1 through 127 (which permit spin-down), and values 128 through 254 (which do not permit spin-down). The highest degree of power management is attained with a setting of 1, and the highest I/O performance with a setting of 254. A value of 255 tells hdparm to disable Advanced Power Management altogether on the drive (not all drives support disabling it, but most do). -S Put the drive into idle (low-power) mode, and also set the standby (spindown) timeout for the drive. This timeout value is used by the drive to determine how long to wait (with no disk activity) before turning off the spindle motor to save power. Under such circumstances, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 and 12 hours, and the value 254 is reserved. 255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.

  Read the article

• Will installing an Ultra ATA cable backwards affect performance?

  - by GMMan

  I've recently purchased a hard drive upgrade for my Xbox 320GB WD Caviar Blue WD3200AAJB and StarTech.com Ultra ATA/66/100/133 cable IDE66 yes I'm crazy When it came to installing the cable, it was too short (my fault), and there wasn't enough space between the master and slave ends to reach both the DVD drive and the hard drive. The only thing I could do was install the cable backwards and twisting it quite a bit to make it fit. The upgrade works, but reading the manual for the hard drive I replaced (10GB Seagate U Series 5), apparently there is a specific way you have to connect the cable. I don't have that option, so the question comes down to, will my drive performance be at Ultra ATA levels, or is it still performing at original ATA speeds? Is there any way I can test this (benchmarking software for Xbox)?

  Read the article

• WD1000FYPS harddrive is marked 0 mb in 3ware (and no SMART)

  - by osgx

  After reboot my SATA 1TB WD1000FYPS (previously is was "Drive error") is marked 0 mb in 3ware web gui. Complete message: Available Drives (Controller ID 0) Port 1 WDC WD1000FYPS-01ZKB0 0.00 MB NOT SUPPORTED [Remove Drive] SMART gives me only Device Model and ATA protocol version 1 (not 7-8 as it must be for SATA) What does it mean? Just before reboot, when is was marked only with "Device Error", smart was: Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: WD-WCASJ1130*** Firmware Version: 02.01B01 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Mar 7 18:47:35 2010 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 188 186 021 Pre-fail Always - 7591 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 229 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3 7 Seek_Error_Rate 0x000e 193 193 000 Old_age Always - 125 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16615 10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 1564 193 Load_Cycle_Count 0x0032 146 146 000 Old_age Always - 164824 194 Temperature_Celsius 0x0022 117 100 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 What can be wrong with he? Can it be restored? PS new smart is === START OF INFORMATION SECTION === Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: [No Information Found] Firmware Version: [No Information Found] Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Mar 8 00:29:44 2010 MSK SMART is only available in ATA Version 3 Revision 3 or greater. We will try to proceed in spite of this. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. Checking for SMART support by trying SMART ENABLE command. Command failed, ata.status=(0x00), ata.command=(0x51), ata.flags=(0x01) Error SMART Enable failed: Input/output error SMART ENABLE failed - this establishes that this device lacks SMART functionality. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. PPS There was a rapid grow of " 192 Power-Off_Retract_Count " before dying. The hard was used in raid, with several hards from the same fabric packaging box (close id's). The hard drives were placed identically. Rapid means almost linear grow from 300 to 1700 in 6-7 hours. Maximal temperature was 41C. (thanks to munin's smart monitoring)

  Read the article

• MySQL on Linux out of memory

  - by Sunrays

  OS: Redhat Enterprise Linux Server Release 5.3 (Tikanga) Architecture: Intel Xeon 64Bit MySQL Server 5.5.20 Enterprise Server advanced edition. Application: Liferay. My database size is 200MB. RAM is 64GB. The memory consumption increases gradually and we run out of memory. Then only rebooting releases all the memory, but then process of memory consumption starts again and reaches 63-64GB in less than a day. Parameters detail: key_buffer_size=16M innodb_buffer_pool_size=3GB inndb_buffer_pool_instances=3 max_connections=1000 innodb_flush_method=O_DIRECT innodb_change_buffering=inserts read_buffer_size=2M read_rnd_buffer_size=256K It's a serious production server issue that I am facing. What could be the reason behind this and how to resolve. This is the report of 2pm today, after Linux was rebooted yesterday @ around 10pm. Output of free -m total used free shared buffers cached Mem: 64455 22053 42402 0 1544 1164 -/+ buffers/cache: 19343 45112 Swap: 74998 0 74998 Output of vmstat 2 5 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 43423976 1583700 1086616 0 0 1 173 22 27 1 1 98 0 0 2 0 0 43280200 1583712 1228636 0 0 0 146 1265 491 2 2 96 1 0 0 0 0 43421940 1583724 1087160 0 0 0 138 1469 738 2 1 97 0 0 1 0 0 43422604 1583728 1086736 0 0 0 5816 1615 934 1 1 97 0 0 0 0 0 43422372 1583732 1086752 0 0 0 2784 1323 545 2 1 97 0 0 Output of top -n 3 -b top - 14:16:22 up 16:32, 5 users, load average: 0.79, 0.77, 0.93 Tasks: 345 total, 1 running, 344 sleeping, 0 stopped, 0 zombie Cpu(s): 1.0%us, 0.9%sy, 0.0%ni, 98.1%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 66002772k total, 22656292k used, 43346480k free, 1582152k buffers Swap: 76798724k total, 0k used, 76798724k free, 1163616k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 6434 mysql 15 0 4095m 841m 5500 S 113.5 1.3 426:53.69 mysqld 1 root 15 0 10344 680 572 S 0.0 0.0 0:03.09 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.01 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.01 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/6 21 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/6 22 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/6 23 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/7 24 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/7 25 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/7 26 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/8 27 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/8 28 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/8 29 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/9 30 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/9 31 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/9 32 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/10 33 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/10 34 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/10 35 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/11 36 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/11 37 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/11 38 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/12 39 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/12 40 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/12 41 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/13 42 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/13 43 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/13 44 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/14 45 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/14 46 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/14 47 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/15 48 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/15 49 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/15 50 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/16 51 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/16 52 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/16 53 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/17 54 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/17 55 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/17 56 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/18 57 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/18 58 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/18 59 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/19 60 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/19 61 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/19 62 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/20 63 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/20 64 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/20 65 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/21 66 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/21 67 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/21 68 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/22 69 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/22 70 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/22 71 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/23 72 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/23 73 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/23 74 root 10 -5 0 0 0 S 0.0 0.0 0:00.02 events/0 75 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/1 76 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/2 77 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/3 78 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/4 79 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/5 80 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/6 81 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/7 82 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/8 83 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/9 84 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/10 85 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/11 86 root 10 -5 0 0 0 S 0.0 0.0 0:00.01 events/12 87 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/13 88 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/14 89 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/15 90 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/16 91 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/17 92 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/18 93 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/19 94 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/20 95 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/21 96 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/22 97 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/23 98 root 10 -5 0 0 0 S 0.0 0.0 0:00.01 khelper 615 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kthread 643 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/0 644 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/1 645 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/2 646 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/3 647 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/4 648 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/5 649 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/6 650 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/7 651 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/8 652 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/9 653 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/10 654 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/11 655 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/12 656 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/13 657 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/14 658 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/15 659 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/16 660 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/17 661 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/18 662 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/19 663 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/20 664 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/21 665 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/22 666 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/23 667 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 kacpid 840 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/0 841 root 18 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/1 842 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/2 843 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/3 844 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/4 845 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/5 846 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/6 847 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/7 848 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/8 849 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/9 850 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/10 851 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/11 852 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/12 853 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/13 854 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/14 855 root 18 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/15 856 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/16 857 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/17 858 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/18 859 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/19 860 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/20 861 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/21 862 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/22 863 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/23 866 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khubd 868 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kseriod 1118 root 23 0 0 0 0 S 0.0 0.0 0:00.00 pdflush 1119 root 15 0 0 0 0 S 0.0 0.0 0:00.11 pdflush 1120 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 kswapd0 1121 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 kswapd1 1122 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 aio/0 1123 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 aio/1 1124 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 aio/2 1125 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/3 1126 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/4 1127 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/5 1128 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/6 1129 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/7 1130 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/8 1131 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/9 1132 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/10 1133 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/11 1134 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/12 1135 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/13 1136 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/14 1137 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/15 1138 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/16 1139 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/17 1140 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/18 1141 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/19 1142 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/20 1143 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/21 1144 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/22 1145 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/23 1308 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 kpsmoused 1566 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/0 1567 root 10 -5 0 0 0 S 0.0 0.0 0:00.27 ata/1 1568 root 10 -5 0 0 0 S 0.0 0.0 0:02.39 ata/2 1569 root 10 -5 0 0 0 S 0.0 0.0 0:00.07 ata/3 1570 root 10 -5 0 0 0 S 0.0 0.0 0:00.72 ata/4 1571 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/5 1572 root 10 -5 0 0 0 S 0.0 0.0 0:00.15 ata/6 1573 root 10 -5 0 0 0 S 0.0 0.0 0:00.07 ata/7 1574 root 10 -5 0 0 0 S 0.0 0.0 0:00.06 ata/8 1575 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/9 1576 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/10 1577 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/11 1578 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/12 1579 root 10 -5 0 0 0 S 0.0 0.0 0:00.14 ata/13 1580 root 10 -5 0 0 0 S 0.0 0.0 0:01.56 ata/14 1581 root 10 -5 0 0 0 S 0.0 0.0 0:00.04 ata/15 1582 root 10 -5 0 0 0 S 0.0 0.0 0:00.40 ata/16 1583 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/17 1584 root 10 -5 0 0 0 S 0.0 0.0 0:00.11 ata/18 1585 root 10 -5 0 0 0 S 0.0 0.0 0:00.03 ata/19 1586 root 10 -5 0 0 0 S 0.0 0.0 0:00.02 ata/20 1587 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/21 1588 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/22 1589 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/23 1590 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 ata_aux 1616 root 10 -5 0 0 0 S 0.0 0.0 0:17.20 scsi_eh_0 1617 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1 1668 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2 1669 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 qla2xxx_2_dpc 1670 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_wq_2 1671 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 fc_wq_2 1672 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 fc_dl_2 1673 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3 1674 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 qla2xxx_3_dpc 1675 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_wq_3 1676 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 fc_wq_3 1677 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 fc_dl_3 1728 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 kstriped 1829 root 10 -5 0 0 0 S 0.0 0.0 1:09.14 kjournald 1857 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kauditd 1891 root 11 -4 13008 1188 388 S 0.0 0.0 0:00.40 udevd 4555 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/0 4556 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/1 4557 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/2 4558 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/3 4559 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/4 4560 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/5 4561 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/6 4562 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/7 4563 root 18 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/8 4564 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/9 4565 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/10 4566 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/11 4567 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/12 4568 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/13 4569 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/14 4570 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/15 4571 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/16 4572 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/17 4573 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/18 4574 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/19 4575 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/20 4576 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/21 4577 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/22 4578 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/23 4579 root 18 -5 0 0 0 S 0.0 0.0 0:00.00 kmpath_handlerd 4734 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kjournald 4736 root 10 -5 0 0 0 S 0.0 0.0 0:04.82 kjournald 4744 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kjournald 5238 root RT 0 87584 3648 2768 S 0.0 0.0 0:03.60 multipathd 5537 root 11 -4 27328 812 580 S 0.0 0.0 0:00.14 auditd 5539 root 7 -8 81804 768 616 S 0.0 0.0 0:00.04 audispd 5564 root 15 0 5904 632 512 S 0.0 0.0 0:00.10 syslogd 5567 root 15 0 3800 432 344 S 0.0 0.0 0:00.01 klogd 5579 root 18 0 10728 384 244 S 0.0 0.0 0:00.42 irqbalance 5592 rpc 18 0 8048 584 464 S 0.0 0.0 0:00.00 portmap 5625 root 18 0 11032 768 632 S 0.0 0.0 0:00.00 rpc.statd 5681 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/0 5682 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/1 5683 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/2 5684 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/3 5685 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/4 5686 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/5 5687 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/6 5688 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/7 5689 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/8 5690 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/9 5691 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/10 5692 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/11

  Read the article

• How to diagnose failing 6Gbps SATA connection?

  - by whitequark

  I have a Samsung RC530 notebook and OCZ Vertex-3 6Gbps SATA SSD working in AHCI mode. # dmesg | grep DMI SAMSUNG ELECTRONICS CO., LTD. RC530/RC730/RC530/RC730, BIOS 03WD.M008.20110927.PSA 09/27/2011 # lspci -nn 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) # sdparm -a /dev/sda /dev/sda: ATA OCZ-VERTEX3 2.15 At the boot, the following messages are present in dmesg (I am running Debian wheezy @ Linux 3.2.8): # dmesg | grep -iE '(ata|ahci)' [ 5.179783] ahci 0000:00:1f.2: version 3.0 [ 5.179802] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.179864] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 5.195424] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 5.195429] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.195436] ahci 0000:00:1f.2: setting latency timer to 64 [ 5.204035] scsi0 : ahci [ 5.204301] scsi1 : ahci [ 5.204447] scsi2 : ahci [ 5.204592] scsi3 : ahci [ 5.204682] scsi4 : ahci [ 5.204799] scsi5 : ahci [ 5.204917] ata1: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 42 [ 5.204920] ata2: DUMMY [ 5.204923] ata3: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06200 irq 42 [ 5.204924] ata4: DUMMY [ 5.204926] ata5: DUMMY [ 5.204927] ata6: DUMMY [ 5.523039] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.525911] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100 [ 5.531006] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.533703] ata3.00: configured for UDMA/100 [ 5.542790] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133 [ 5.542800] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.552751] ata1.00: configured for UDMA/133 [ 5.553050] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5 [ 5.559621] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SC00 PQ: 0 ANSI: 5 [ 5.564059] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 5.564127] sd 0:0:0:0: [sda] Write Protect is off [ 5.564131] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.564158] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.564582] sda: sda1 [ 5.564810] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.572006] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.572010] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.572189] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 6.717181] ata1.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen [ 6.717238] ata1.00: irq_stat 0x08000000, interface fatal error [ 6.717291] ata1: SError: { UnrecovData HostInt 10B8B BadCRC } [ 6.717342] ata1.00: failed command: READ FPDMA QUEUED [ 6.717395] ata1.00: cmd 60/50:00:20:39:58/00:00:00:00:00/40 tag 0 ncq 40960 in [ 6.717396] res 40/00:00:20:39:58/00:00:00:00:00/40 Emask 0x50 (ATA bus error) [ 6.717503] ata1.00: status: { DRDY } [ 6.717553] ata1: hard resetting link [ 7.033417] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.055234] ata1.00: configured for UDMA/133 [ 7.055262] ata1: EH complete [ 7.147280] ata1.00: exception Emask 0x10 SAct 0xf8 SErr 0x280100 action 0x6 frozen [ 7.147340] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.147393] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.147460] ata1.00: failed command: READ FPDMA QUEUED [ 7.147529] ata1.00: cmd 60/08:18:88:17:41/00:00:02:00:00/40 tag 3 ncq 4096 in [ 7.147531] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.147691] ata1.00: status: { DRDY } [ 7.147754] ata1.00: failed command: READ FPDMA QUEUED [ 7.147821] ata1.00: cmd 60/00:20:f8:42:4c/01:00:02:00:00/40 tag 4 ncq 131072 in [ 7.147822] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.147977] ata1.00: status: { DRDY } [ 7.148036] ata1.00: failed command: READ FPDMA QUEUED [ 7.148100] ata1.00: cmd 60/50:28:f8:43:4c/00:00:02:00:00/40 tag 5 ncq 40960 in [ 7.148101] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148255] ata1.00: status: { DRDY } [ 7.148315] ata1.00: failed command: READ FPDMA QUEUED [ 7.148379] ata1.00: cmd 60/00:30:50:98:64/01:00:02:00:00/40 tag 6 ncq 131072 in [ 7.148380] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148534] ata1.00: status: { DRDY } [ 7.148593] ata1.00: failed command: READ FPDMA QUEUED [ 7.148657] ata1.00: cmd 60/00:38:50:99:64/01:00:02:00:00/40 tag 7 ncq 131072 in [ 7.148658] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148813] ata1.00: status: { DRDY } [ 7.148875] ata1: hard resetting link [ 7.464842] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.486794] ata1.00: configured for UDMA/133 [ 7.486822] ata1: EH complete [ 7.546395] ata1.00: exception Emask 0x10 SAct 0x2f SErr 0x280100 action 0x6 frozen [ 7.546470] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.546531] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.546588] ata1.00: failed command: READ FPDMA QUEUED [ 7.546648] ata1.00: cmd 60/00:00:e0:4b:61/01:00:02:00:00/40 tag 0 ncq 131072 in [ 7.546649] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.546794] ata1.00: status: { DRDY } [ 7.546847] ata1.00: failed command: READ FPDMA QUEUED [ 7.546906] ata1.00: cmd 60/00:08:90:2f:48/01:00:02:00:00/40 tag 1 ncq 131072 in [ 7.546907] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547053] ata1.00: status: { DRDY } [ 7.547106] ata1.00: failed command: READ FPDMA QUEUED [ 7.547165] ata1.00: cmd 60/00:10:90:30:48/01:00:02:00:00/40 tag 2 ncq 131072 in [ 7.547166] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547310] ata1.00: status: { DRDY } [ 7.547363] ata1.00: failed command: READ FPDMA QUEUED [ 7.547422] ata1.00: cmd 60/00:18:50:c7:64/01:00:02:00:00/40 tag 3 ncq 131072 in [ 7.547423] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547568] ata1.00: status: { DRDY } [ 7.547621] ata1.00: failed command: READ FPDMA QUEUED [ 7.547681] ata1.00: cmd 60/00:28:e0:4c:61/01:00:02:00:00/40 tag 5 ncq 131072 in [ 7.547682] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547825] ata1.00: status: { DRDY } [ 7.547882] ata1: hard resetting link [ 7.864408] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.886351] ata1.00: configured for UDMA/133 [ 7.886375] ata1: EH complete [ 7.890012] ata1: limiting SATA link speed to 3.0 Gbps [ 7.890016] ata1.00: exception Emask 0x10 SAct 0x7 SErr 0x280100 action 0x6 frozen [ 7.890093] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.890152] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.890210] ata1.00: failed command: READ FPDMA QUEUED [ 7.890272] ata1.00: cmd 60/00:00:90:33:48/01:00:02:00:00/40 tag 0 ncq 131072 in [ 7.890273] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890418] ata1.00: status: { DRDY } [ 7.890472] ata1.00: failed command: READ FPDMA QUEUED [ 7.890530] ata1.00: cmd 60/00:08:90:34:48/01:00:02:00:00/40 tag 1 ncq 131072 in [ 7.890531] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890672] ata1.00: status: { DRDY } [ 7.890724] ata1.00: failed command: READ FPDMA QUEUED [ 7.890781] ata1.00: cmd 60/78:10:e0:4f:61/00:00:02:00:00/40 tag 2 ncq 61440 in [ 7.890782] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890925] ata1.00: status: { DRDY } [ 7.890981] ata1: hard resetting link [ 8.208021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 8.230100] ata1.00: configured for UDMA/133 [ 8.230124] ata1: EH complete Looks like the SATA interface tries to use 6Gbps link, then fails miserably and Linux fallbacks to 3Gbps. This is somewhat fine for me, as the system boots successfully each time and works under high load (cd linux-3.2.8; make -j16). I've also ran memtest86+ and it did not find any errors. What concerns me more is that Grub sometimes takes a long time to load the images and/or fails to load itself completely. The error is consistent and is probablistic: that is, each time I boot I have a certain chance to fail. Actually, I have a slight suspiction on the cause of the failure. Look at the cabling: What kind of engineer does it this way? Nah. Even 1Gbps Ethernet hardly tolerates cables bent over a small angle, and there you have 6Gbps SATA. How cound I determine and fix the cause of errors and/or switch the link to 3Gbps mode permanently?

  Read the article

• How to update the hard disk device drivers for a ghosted hard drive image so it can run on different hardware: Ultra ATA > SATA

  - by rism

  I've ghosted a Winxp machine from one laptop with Ultra ATA drive, and would like to set it up on another laptop as a multiboot option on another hard driver with a SATA drive. I can install the partition fine but if i make it active and try to boot it it blue screens. The blue screen is so fast i cant even read it, other than to make out it's saying "something", im picking probably hard drive as it goes through POST fine. So basically i would like to boot into my Win7 OS, and then somehow manipulate the XP partition to use updated drivers for the new hard drive/laptop so that i can then at least boot into the XP OS on the new machine and update all the other drivers in safe mode or whatever to get it to run. I assume someone is going to tell me to just do a fresh install, but that kinda defeats the purpose of ghosting at this point. There is a significant amount of personalisation, development setup on the XP machine that i would like to just transfer as is. As it stands ive invested minmal time in getting it to run, just a ghost and recovery and then a blue screen boot or two, so its still well worth it to me, time wise to try this way. Thanks.

  Read the article

• High Linux loads on low CPU/memory usage

  - by user13323

  Hi. I have quite strange situation, where my CentOS 5.5 box loads are high, but the CPU and memory used are pretty low: top - 20:41:38 up 42 days, 6:14, 2 users, load average: 19.79, 21.25, 18.87 Tasks: 254 total, 1 running, 253 sleeping, 0 stopped, 0 zombie Cpu(s): 3.8%us, 0.3%sy, 0.1%ni, 95.0%id, 0.6%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 4035284k total, 4008084k used, 27200k free, 38748k buffers Swap: 4208928k total, 242576k used, 3966352k free, 1465008k cached free -mt total used free shared buffers cached Mem: 3940 3910 29 0 37 1427 -/+ buffers/cache: 2445 1495 Swap: 4110 236 3873 Total: 8050 4147 3903 Iostat also shows good results: avg-cpu: %user %nice %system %iowait %steal %idle 3.83 0.13 0.41 0.58 0.00 95.05 Here is the ps aux output: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 10348 80 ? Ss 2010 2:11 init [3] root 2 0.0 0.0 0 0 ? S< 2010 0:00 [migration/0] root 3 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/0] root 5 0.0 0.0 0 0 ? S< 2010 0:02 [migration/1] root 6 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/1] root 7 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/1] root 8 0.0 0.0 0 0 ? S< 2010 0:02 [migration/2] root 9 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/2] root 10 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/2] root 11 0.0 0.0 0 0 ? S< 2010 0:02 [migration/3] root 12 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/3] root 13 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/3] root 14 0.0 0.0 0 0 ? S< 2010 0:03 [migration/4] root 15 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/4] root 16 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/4] root 17 0.0 0.0 0 0 ? S< 2010 0:01 [migration/5] root 18 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/5] root 19 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/5] root 20 0.0 0.0 0 0 ? S< 2010 0:11 [migration/6] root 21 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/6] root 22 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/6] root 23 0.0 0.0 0 0 ? S< 2010 0:01 [migration/7] root 24 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/7] root 25 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/7] root 26 0.0 0.0 0 0 ? S< 2010 0:00 [migration/8] root 27 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/8] root 28 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/8] root 29 0.0 0.0 0 0 ? S< 2010 0:00 [migration/9] root 30 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/9] root 31 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/9] root 32 0.0 0.0 0 0 ? S< 2010 0:08 [migration/10] root 33 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/10] root 34 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/10] root 35 0.0 0.0 0 0 ? S< 2010 0:05 [migration/11] root 36 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/11] root 37 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/11] root 38 0.0 0.0 0 0 ? S< 2010 0:02 [migration/12] root 39 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/12] root 40 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/12] root 41 0.0 0.0 0 0 ? S< 2010 0:14 [migration/13] root 42 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/13] root 43 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/13] root 44 0.0 0.0 0 0 ? S< 2010 0:04 [migration/14] root 45 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/14] root 46 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/14] root 47 0.0 0.0 0 0 ? S< 2010 0:01 [migration/15] root 48 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/15] root 49 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/15] root 50 0.0 0.0 0 0 ? S< 2010 0:00 [events/0] root 51 0.0 0.0 0 0 ? S< 2010 0:00 [events/1] root 52 0.0 0.0 0 0 ? S< 2010 0:00 [events/2] root 53 0.0 0.0 0 0 ? S< 2010 0:00 [events/3] root 54 0.0 0.0 0 0 ? S< 2010 0:00 [events/4] root 55 0.0 0.0 0 0 ? S< 2010 0:00 [events/5] root 56 0.0 0.0 0 0 ? S< 2010 0:00 [events/6] root 57 0.0 0.0 0 0 ? S< 2010 0:00 [events/7] root 58 0.0 0.0 0 0 ? S< 2010 0:00 [events/8] root 59 0.0 0.0 0 0 ? S< 2010 0:00 [events/9] root 60 0.0 0.0 0 0 ? S< 2010 0:00 [events/10] root 61 0.0 0.0 0 0 ? S< 2010 0:00 [events/11] root 62 0.0 0.0 0 0 ? S< 2010 0:00 [events/12] root 63 0.0 0.0 0 0 ? S< 2010 0:00 [events/13] root 64 0.0 0.0 0 0 ? S< 2010 0:00 [events/14] root 65 0.0 0.0 0 0 ? S< 2010 0:00 [events/15] root 66 0.0 0.0 0 0 ? S< 2010 0:00 [khelper] root 107 0.0 0.0 0 0 ? S< 2010 0:00 [kthread] root 126 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/0] root 127 0.0 0.0 0 0 ? S< 2010 0:03 [kblockd/1] root 128 0.0 0.0 0 0 ? S< 2010 0:01 [kblockd/2] root 129 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/3] root 130 0.0 0.0 0 0 ? S< 2010 0:05 [kblockd/4] root 131 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/5] root 132 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/6] root 133 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/7] root 134 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/8] root 135 0.0 0.0 0 0 ? S< 2010 0:02 [kblockd/9] root 136 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/10] root 137 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/11] root 138 0.0 0.0 0 0 ? S< 2010 0:04 [kblockd/12] root 139 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/13] root 140 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/14] root 141 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/15] root 142 0.0 0.0 0 0 ? S< 2010 0:00 [kacpid] root 281 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/0] root 282 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/1] root 283 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/2] root 284 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/3] root 285 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/4] root 286 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/5] root 287 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/6] root 288 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/7] root 289 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/8] root 290 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/9] root 291 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/10] root 292 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/11] root 293 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/12] root 294 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/13] root 295 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/14] root 296 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/15] root 299 0.0 0.0 0 0 ? S< 2010 0:00 [khubd] root 301 0.0 0.0 0 0 ? S< 2010 0:00 [kseriod] root 490 0.0 0.0 0 0 ? S 2010 0:00 [khungtaskd] root 493 0.1 0.0 0 0 ? S< 2010 94:48 [kswapd1] root 494 0.0 0.0 0 0 ? S< 2010 0:00 [aio/0] root 495 0.0 0.0 0 0 ? S< 2010 0:00 [aio/1] root 496 0.0 0.0 0 0 ? S< 2010 0:00 [aio/2] root 497 0.0 0.0 0 0 ? S< 2010 0:00 [aio/3] root 498 0.0 0.0 0 0 ? S< 2010 0:00 [aio/4] root 499 0.0 0.0 0 0 ? S< 2010 0:00 [aio/5] root 500 0.0 0.0 0 0 ? S< 2010 0:00 [aio/6] root 501 0.0 0.0 0 0 ? S< 2010 0:00 [aio/7] root 502 0.0 0.0 0 0 ? S< 2010 0:00 [aio/8] root 503 0.0 0.0 0 0 ? S< 2010 0:00 [aio/9] root 504 0.0 0.0 0 0 ? S< 2010 0:00 [aio/10] root 505 0.0 0.0 0 0 ? S< 2010 0:00 [aio/11] root 506 0.0 0.0 0 0 ? S< 2010 0:00 [aio/12] root 507 0.0 0.0 0 0 ? S< 2010 0:00 [aio/13] root 508 0.0 0.0 0 0 ? S< 2010 0:00 [aio/14] root 509 0.0 0.0 0 0 ? S< 2010 0:00 [aio/15] root 665 0.0 0.0 0 0 ? S< 2010 0:00 [kpsmoused] root 808 0.0 0.0 0 0 ? S< 2010 0:00 [ata/0] root 809 0.0 0.0 0 0 ? S< 2010 0:00 [ata/1] root 810 0.0 0.0 0 0 ? S< 2010 0:00 [ata/2] root 811 0.0 0.0 0 0 ? S< 2010 0:00 [ata/3] root 812 0.0 0.0 0 0 ? S< 2010 0:00 [ata/4] root 813 0.0 0.0 0 0 ? S< 2010 0:00 [ata/5] root 814 0.0 0.0 0 0 ? S< 2010 0:00 [ata/6] root 815 0.0 0.0 0 0 ? S< 2010 0:00 [ata/7] root 816 0.0 0.0 0 0 ? S< 2010 0:00 [ata/8] root 817 0.0 0.0 0 0 ? S< 2010 0:00 [ata/9] root 818 0.0 0.0 0 0 ? S< 2010 0:00 [ata/10] root 819 0.0 0.0 0 0 ? S< 2010 0:00 [ata/11] root 820 0.0 0.0 0 0 ? S< 2010 0:00 [ata/12] root 821 0.0 0.0 0 0 ? S< 2010 0:00 [ata/13] root 822 0.0 0.0 0 0 ? S< 2010 0:00 [ata/14] root 823 0.0 0.0 0 0 ? S< 2010 0:00 [ata/15] root 824 0.0 0.0 0 0 ? S< 2010 0:00 [ata_aux] root 842 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_0] root 843 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_1] root 844 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_2] root 845 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_3] root 846 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_4] root 847 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_5] root 882 0.0 0.0 0 0 ? S< 2010 0:00 [kstriped] root 951 0.0 0.0 0 0 ? S< 2010 4:24 [kjournald] root 976 0.0 0.0 0 0 ? S< 2010 0:00 [kauditd] postfix 990 0.0 0.0 54208 2284 ? S 21:19 0:00 pickup -l -t fifo -u root 1013 0.0 0.0 12676 8 ? S<s 2010 0:00 /sbin/udevd -d root 1326 0.0 0.0 90900 3400 ? Ss 14:53 0:00 sshd: root@notty root 1410 0.0 0.0 53972 2108 ? Ss 14:53 0:00 /usr/libexec/openssh/sftp-server root 2690 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/0] root 2691 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/1] root 2692 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/2] root 2693 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/3] root 2694 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/4] root 2695 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/5] root 2696 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/6] root 2697 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/7] root 2698 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/8] root 2699 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/9] root 2700 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/10] root 2701 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/11] root 2702 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/12] root 2703 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/13] root 2704 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/14] root 2705 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/15] root 2706 0.0 0.0 0 0 ? S< 2010 0:00 [kmpath_handlerd] root 2755 0.0 0.0 0 0 ? S< 2010 4:35 [kjournald] root 2757 0.0 0.0 0 0 ? S< 2010 3:38 [kjournald] root 2759 0.0 0.0 0 0 ? S< 2010 4:10 [kjournald] root 2761 0.0 0.0 0 0 ? S< 2010 4:26 [kjournald] root 2763 0.0 0.0 0 0 ? S< 2010 3:15 [kjournald] root 2765 0.0 0.0 0 0 ? S< 2010 3:04 [kjournald] root 2767 0.0 0.0 0 0 ? S< 2010 3:02 [kjournald] root 2769 0.0 0.0 0 0 ? S< 2010 2:58 [kjournald] root 2771 0.0 0.0 0 0 ? S< 2010 0:00 [kjournald] root 3340 0.0 0.0 5908 356 ? Ss 2010 2:48 syslogd -m 0 root 3343 0.0 0.0 3804 212 ? Ss 2010 0:03 klogd -x root 3430 0.0 0.0 0 0 ? S< 2010 0:50 [kondemand/0] root 3431 0.0 0.0 0 0 ? S< 2010 0:54 [kondemand/1] root 3432 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/2] root 3433 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/3] root 3434 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/4] root 3435 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/5] root 3436 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/6] root 3437 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/7] root 3438 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/8] root 3439 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/9] root 3440 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/10] root 3441 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/11] root 3442 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/12] root 3443 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/13] root 3444 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/14] root 3445 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/15] root 3461 0.0 0.0 10760 284 ? Ss 2010 3:44 irqbalance rpc 3481 0.0 0.0 8052 4 ? Ss 2010 0:00 portmap root 3526 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/0] root 3527 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/1] root 3528 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/2] root 3529 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/3] root 3530 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/4] root 3531 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/5] root 3532 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/6] root 3533 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/7] root 3534 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/8] root 3535 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/9] root 3536 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/10] root 3537 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/11] root 3538 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/12] root 3539 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/13] root 3540 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/14] root 3541 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/15] root 3563 0.0 0.0 10160 8 ? Ss 2010 0:00 rpc.statd root 3595 0.0 0.0 55180 4 ? Ss 2010 0:00 rpc.idmapd dbus 3618 0.0 0.0 21256 28 ? Ss 2010 0:00 dbus-daemon --system root 3649 0.2 0.4 563084 18796 ? S<sl 2010 179:03 mfsmount /mnt/mfs -o rw,mfsmaster=web1.ovs.local root 3702 0.0 0.0 3800 8 ? Ss 2010 0:00 /usr/sbin/acpid 68 3715 0.0 0.0 31312 816 ? Ss 2010 3:14 hald root 3716 0.0 0.0 21692 28 ? S 2010 0:00 hald-runner 68 3726 0.0 0.0 12324 8 ? S 2010 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 68 3730 0.0 0.0 12324 8 ? S 2010 0:00 hald-addon-keyboard: listening on /dev/input/event0 root 3773 0.0 0.0 62608 332 ? Ss 2010 0:00 /usr/sbin/sshd ganglia 3786 0.0 0.0 24704 988 ? Ss 2010 14:26 /usr/sbin/gmond root 3843 0.0 0.0 54144 300 ? Ss 2010 1:49 /usr/libexec/postfix/master postfix 3855 0.0 0.0 54860 1060 ? S 2010 0:22 qmgr -l -t fifo -u root 3877 0.0 0.0 74828 708 ? Ss 2010 1:15 crond root 3891 1.4 1.9 326960 77704 ? S<l 2010 896:59 mfschunkserver root 4122 0.0 0.0 18732 176 ? Ss 2010 0:10 /usr/sbin/atd root 4193 0.0 0.8 129180 35984 ? Ssl 2010 11:04 /usr/bin/ruby /usr/sbin/puppetd root 4223 0.0 0.0 18416 172 ? S 2010 0:10 /usr/sbin/smartd -q never root 4227 0.0 0.0 3792 8 tty1 Ss+ 2010 0:00 /sbin/mingetty tty1 root 4230 0.0 0.0 3792 8 tty2 Ss+ 2010 0:00 /sbin/mingetty tty2 root 4231 0.0 0.0 3792 8 tty3 Ss+ 2010 0:00 /sbin/mingetty tty3 root 4233 0.0 0.0 3792 8 tty4 Ss+ 2010 0:00 /sbin/mingetty tty4 root 4234 0.0 0.0 3792 8 tty5 Ss+ 2010 0:00 /sbin/mingetty tty5 root 4236 0.0 0.0 3792 8 tty6 Ss+ 2010 0:00 /sbin/mingetty tty6 root 5596 0.0 0.0 19368 20 ? Ss 2010 0:00 DarwinStreamingServer qtss 5597 0.8 0.9 166572 37408 ? Sl 2010 523:02 DarwinStreamingServer root 8714 0.0 0.0 0 0 ? S Jan31 0:33 [pdflush] root 9914 0.0 0.0 65612 968 pts/1 R+ 21:49 0:00 ps aux root 10765 0.0 0.0 76792 1080 ? Ss Jan24 0:58 SCREEN root 10766 0.0 0.0 66212 872 pts/3 Ss Jan24 0:00 /bin/bash root 11833 0.0 0.0 63852 1060 pts/3 S+ 17:17 0:00 /bin/sh ./launch.sh root 11834 437 42.9 4126884 1733348 pts/3 Sl+ 17:17 1190:50 /usr/bin/java -Xms128m -Xmx512m -XX:+UseConcMarkSweepGC -jar /JavaCore/JavaCore.jar root 13127 4.7 1.1 110564 46876 ? Ssl 17:18 12:55 /JavaCore/fetcher.bin root 19392 0.0 0.0 90108 3336 ? Rs 20:35 0:00 sshd: root@pts/1 root 19401 0.0 0.0 66216 1640 pts/1 Ss 20:35 0:00 -bash root 20567 0.0 0.0 90108 412 ? Ss Jan16 1:58 sshd: root@pts/0 root 20569 0.0 0.0 66084 912 pts/0 Ss Jan16 0:00 -bash root 21053 0.0 0.0 63856 28 ? S Jan30 0:00 /bin/sh /usr/bin/WowzaMediaServerd /usr/local/WowzaMediaServer/bin/setenv.sh /var/run/WowzaM root 21054 2.9 10.3 2252652 418468 ? Sl Jan30 314:25 java -Xmx1200M -server -Djava.net.preferIPv4Stack=true -Dcom.sun.management.jmxremote=true - root 21915 0.0 0.0 0 0 ? S Feb01 0:00 [pdflush] root 29996 0.0 0.0 76524 1004 pts/0 S+ 14:41 0:00 screen -x Any idea what could this be, or where I should look for more diagnostic information? Thanks.

  Read the article

• Dell PERC 5 - RAID-10 keeps rebuilding drive 2 every day

  - by raid question

  I have a Dell PowerEdge 2950 with this card: RAID bus controller [0104]: Dell PowerEdge Expandable RAID controller 5 [1028:0015] and six disks in a RAID-10. I replaced drive 2, because it didn't show up, and then it started to rebuild itself: root@backup01:~# megaraidsas-status -- Arrays informations -- -- ID | Type | Size | Status a0d0 | RAID 10 | 5587GiB | DEGRADED -- Disks informations -- ID | Model | Status | Warnings a0e8s0 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s1 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5394 a0e8s2 | ATA ST2000DM001-1E61 1863GiB | rebuild | errs: media:0 other:99 a0e8s3 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s4 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s5 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 The rebuild finishes, then the virtual drive becomes optimal, and drive 2 goes online. Then once a day, drive 2 acts like it's been removed, and the rebuild starts all over again. How do I make this once a day rebuild stop? Event Description: Removed: PD 02(e1/s2) Event Description: Removed: PD 02(e1/s2) Info: enclPd=08, scsiType=0, portMap=04, sasAddr=1221000002000000,0000000000000000 Event Description: State change on VD 00/0 from OPTIMAL(3) to DEGRADED(2) Event Description: VD 00/0 is now DEGRADED1 Event Description: State change on PD 02(e1/s2) from ONLINE(18) to FAILED(11) Event Description: State change on PD 02(e1/s2) from FAILED(11) to UNCONFIGURED_BAD(1) Event Description: Background Initialization failed on VD 00/0 Event Description: Inserted: PD 02(e1/s2) Event Description: Inserted: PD 02(e1/s2) Info: enclPd=08, scsiType=0, portMap=04, sasAddr=1221000002000000,0000000000000000 Event Description: PD 02(e1/s2) is not a certified drive Event Description: State change on PD 02(e1/s2) Event Description: State change on PD 02(e1/s2) from UNCONFIGURED_GOOD(0) to OFFLINE(10) from UNCONFIGURED_BAD(1) to UNCONFIGURED_GOOD(0) Event Description: Rebuild automatically started on PD 02(e1/s2) Event Description: State change on PD 02(e1/s2) from OFFLINE(10) to REBUILD(14)

  Read the article

1 2 3 4 5 6 7 8 9 10 11  | Next Page >