Search Results

Search found 9658 results on 387 pages for 'authentication provider'.

Page 1/387 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Configuring Fed Authentication Methods in OIF / IdP

  - by Damien Carru

  In this article, I will provide examples on how to configure OIF/IdP to map OAM Authentication Schemes to Federation Authentication Methods, based on the concepts introduced in my previous entry. I will show examples for the three protocols supported by OIF: SAML 2.0 SSO SAML 1.1 SSO OpenID 2.0 Enjoy the reading! Configuration As I mentioned in my previous article, mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. WLST Commands The two OIF WLST commands that can be used to define mapping Federation Authentication Methods to OAM Authentication Schemes are: addSPPartnerProfileAuthnMethod() to define a mapping on an SP Partner Profile, taking as parameters: The name of the SP Partner Profile The Federation Authentication Method The OAM Authentication Scheme name addSPPartnerAuthnMethod() to define a mapping on an SP Partner , taking as parameters: The name of the SP Partner The Federation Authentication Method The OAM Authentication Scheme name Note: I will discuss in a subsequent article the other parameters of those commands. In the next sections, I will show examples on how to use those methods: For SAML 2.0, I will configure the SP Partner Profile, that will apply all the mappings to SP Partners referencing this profile, unless they override mapping definition For SAML 1.1, I will configure the SP Partner. For OpenID 2.0, I will configure the SP/RP Partner SAML 2.0 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 2.0 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use BasicScheme as the Authentication Scheme Map BasicSessionScheme  to  the urn:oasis:names:tc:SAML:2.0:ac:classes:Password Federation Authentication Method Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to  the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                   urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> BasicScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to BasicScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "BasicScheme") Exit the WLST environment:exit() The user will now be challenged via HTTP Basic Authentication defined in the BasicScheme for AcmeSP. Also, as noted earlier, the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via HTTP Basic Authentication, OIF/IdP would issue an Assertion similar to: <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                   urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> Mapping BasicScheme To change the Federation Authentication Method mapping for the BasicScheme to urn:oasis:names:tc:SAML:2.0:ac:classes:Password instead of urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport for the saml20-sp-partner-profile SAML 2.0 SP Partner Profile (the profile to which my AcmeSP Partner is bound to), I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:Password", "BasicScheme") Exit the WLST environment:exit() After authentication via HTTP Basic Authentication, OIF/IdP would now issue an Assertion similar to (see that the AuthnContextClassRef was changed from PasswordProtectedTransport to Password): <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                   urn:oasis:names:tc:SAML:2.0:ac:classes:Password                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to OAMLDAPPluginAuthnScheme instead of BasicScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will now be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme and BasicScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods. As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthnContextClassRef set to OAMLDAPPluginAuthnScheme): <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef> OAMLDAPPluginAuthnScheme                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To add the OAMLDAPPluginAuthnScheme  to the Federation Authentication Method urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapping, I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to PasswordProtectedTransport): <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                   urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> SAML 1.1 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 1.1 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to  the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method Use LDAPScheme as the Authentication Scheme Map LDAPScheme to  the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:1.0:am:password to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">            <saml:Subject>                <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner to OAMLDAPPluginAuthnScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for the SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods (in the SP Partner Profile). As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to OAMLDAPPluginAuthnScheme): <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="OAMLDAPPluginAuthnScheme">            <saml:Subject>                <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To map the OAMLDAPPluginAuthnScheme  to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password for this SP Partner only, I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to password): <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">            <saml:Subject>                <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> LDAPScheme as Authentication Scheme I will now show that by defining a Federation Authentication Mapping at the Partner level, this now ignores all mappings defined at the SP Partner Profile level. For this test, I will switch the default Authentication Scheme for this SP Partner back to LDAPScheme, and the Assertion issued by OIF/IdP will not be able to map this LDAPScheme to a Federation Authentication Method anymore, since A Federation Authentication Method mapping is defined at the SP Partner level and thus the mappings defined at the SP Partner Profile are ignored The LDAPScheme is not listed in the mapping at the Partner level I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for this SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to LDAPScheme): <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="LDAPScheme">            <saml:Subject>                <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> Mapping LDAPScheme at Partner Level To fix this issue, we will need to add the LDAPScheme  to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password mapping for this SP Partner only. I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to password): <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">            <saml:Subject>                <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> OpenID 2.0 In the OpenID 2.0 flows, the RP must request use of PAPE, in order for OIF/IdP/OP to include PAPE information. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. The WLST command will take a list of policies, delimited by the ',' character, instead of SAML 2.0 or SAML 1.1 where a single Federation Authentication Method had to be specified. Test Setup In this setup, OIF is acting as an IdP/OP and is integrated with a remote OpenID 2.0 SP/RP partner identified by AcmeRP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Map LDAPScheme to  the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods (the second one is a custom for this use case) LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. No Federation Authentication Method is defined OOTB for OpenID 2.0, so if the IdP/OP issue an SSO response with a PAPE Response element, it will specify the scheme name instead of Federation Authentication Methods After authentication via FORM, OIF/IdP would issue an SSO Response similar to: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=LDAPScheme&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D Mapping LDAPScheme To map the LDAP Scheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods, I will execute the addSPPartnerAuthnMethod() method (the policies will be comma separated): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeRP", "http://schemas.openid.net/pape/policies/2007/06/phishing-resistant,http://openid-policies/password-protected", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to the two policies): https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant+http%3A%2F%2Fopenid-policies%2Fpassword-protected&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will cover how OIF/IdP can be configured so that an SP can request a specific Federation Authentication Method to challenge the user during Federation SSO.Cheers,Damien Carru

  Read the article

• Configure Forms based authentication in SharePoint 2010

  - by sreejukg

    Configuring form authentication is a straight forward task in SharePoint. Mostly public facing websites built on SharePoint requires form based authentication. Recently, one of the WCM implementation where I was included in the project team required registration system. Any internet user can register to the site and the site offering them some membership specific functionalities once the user logged in. Since the registration open for all, I don’t want to store all those users in Active Directory. I have decided to use Forms based authentication for those users. This is a typical scenario of form authentication in SharePoint implementation. To implement form authentication you require the following A data store where you are storing the users – technically this can be active directory, SQL server database, LDAP etc. Form authentication will redirect the user to the login page, if the request is not authenticated. In the login page, there will be controls that validate the user inputs against the configured data store. In this article, I am going to use SQL server database with ASP.Net membership API’s to configure form based authentication in SharePoint 2010. This article assumes that you have SQL membership database available. I already configured the membership and roles database using aspnet_regsql command. If you want to know how to configure membership database using aspnet_regsql command, read the below blog post. http://weblogs.asp.net/sreejukg/archive/2011/06/16/usage-of-aspnet-regsql-exe-in-asp-net-4.aspx The snapshot of the database after implementing membership and role manager is as follows. I have used the database name “aspnetdb_claim”. Make sure you have created the database and make sure your database contains tables and stored procedures for membership. Create a web application with claims based authentication. This article assumes you already created a web application using claims based authentication. If you want to enable forms based authentication in SharePoint 2010, you must enable claims based authentication. Read this post for creating a web application using claims based authentication. http://weblogs.asp.net/sreejukg/archive/2011/06/15/create-a-web-application-in-sharepoint-2010-using-claims-based-authentication.aspx  You make sure, you have selected enable form authentication, and then selected Membership provider and Role manager name. To make sure you are done with the configuration, navigate to central administration website, from central administration, navigate to the Web Applications page, select the web application and click on icon, you will see the authentication providers for the current web application. Go to the section Claims authentication types, and make sure you have enabled forms based authentication. As mentioned in the snapshot, I have named the membership provider as SPFormAuthMembership and role manager as SPFormAuthRoleManager. You can choose your own names as you need. Modify the configuration files(Web.Config) to enable form authentication There are three applications that needs to be configured to support form authentication. The following are those applications. Central Administration If you want to assign permissions to web application using the credentials from form authentication, you need to update Central Administration configuration. If you do not want to access form authentication credentials from Central Administration, just leave this step.  STS service application Security Token service is the service application that issues security token when users are logging in. You need to modify the configuration of STS application to make sure users are able to login. To find the STS application, follow the following steps Go to the IIS Manager Expand the sites Node, you will see SharePoint Web Services Expand SharePoint Web Services, you can see SecurityTokenServiceApplication Right click SecuritytokenServiceApplication and click explore, it will open the corresponding file system. By default, the path for STS is C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\SecurityToken You need to modify the configuration file available in the mentioned location. The web application that needs to be enabled with form authentication. You need to modify the configuration of your web application to make sure your web application identifies users from the form authentication.   Based on the above, I am going to modify the web configuration. At end of each step, I have mentioned the expected output. I recommend you to go step by step and after each step, make sure the configuration changes are working as expected. If you do everything all together, and test your application at the end, you may face difficulties in troubleshooting the configuration errors. Modifications for Central Administration Web.Config Open the web.config for the Central administration in a text editor. I always prefer Visual Studio, for editing web.config. In most cases, the path of the web.config for the central administration website is as follows C:\inetpub\wwwroot\wss\VirtualDirectories\<port number> Make sure you keep a backup copy of the web.config, before editing it. Let me summarize what we are going to do with Central Administration web.config. First I am going to add a connection string that points to the form authentication database, that I created as mentioned in previous steps. Then I need to add a membership provider and a role manager with the corresponding connectionstring. Then I need to update the peoplepickerwildcards section to make sure the users are appearing in search results. By default there is no connection string available in the web.config of Central Administration. Add a connection string just after the configsections element. The below is the connection string I have used all over the article. <add name="FormAuthConnString" connectionString="Initial Catalog=yourdatabasename;data source=databaseservername;Integrated Security=SSPI;" /> Once you added the connection string, the web.config look similar to Now add membership provider to the code. In web.config for CA, there will be <membership> tag, search for it. You will find membership and role manager under the <system.web> element. Under the membership providers section add the below code… <add name="SPFormAuthMembership" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" applicationName="FormAuthApplication" connectionStringName="FormAuthConnString" /> After adding memberhip element, see the snapshot of the web.config. Now you need to add role manager element to the web.config. Insider providers element under rolemanager, add the below code. <add name="SPFormAuthRoleManager" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" applicationName="FormAuthApplication" connectionStringName="FormAuthConnString" /> After adding, your role manager will look similar to the following. As a last step, you need to update the people picker wildcard element in web.config, so that the users from your membership provider are available for browsing in Central Administration. Search for PeoplePickerWildcards in the web.config, add the following inside the <PeoplePickerWildcards> tag. <add key="SPFormAuthMembership" value="%" /> After adding this element, your web.config will look like After completing these steps, you can browse the users available in the SQL server database from central administration website. Go to the site collection administrator’s page from central administration. Select the site collection you have created for form authentication. Click on the people picker icon, choose Forms Auth and click on the search icon, you will see the users listed from the SQL server database. Once you complete these steps, make sure the users are available for browsing from central administration website. If you are unable to find the users, there must be some errors in the configuration, check windows event logs to find related errors and fix them. Change the web.config for STS application Open the web.config for STS application in text editor. By default, STS web.config does not have system.Web or connectionstrings section. Just after the System.Webserver element, add the following code. <connectionStrings> <add name="FormAuthConnString" connectionString="Initial Catalog=aspnetdb_claim;data source=sp2010_db;Integrated Security=SSPI;" /> </connectionStrings> <system.web> <roleManager enabled="true" cacheRolesInCookie="false" cookieName=".ASPXROLES" cookieTimeout="30" cookiePath="/" cookieRequireSSL="false" cookieSlidingExpiration="true" cookieProtection="All" createPersistentCookie="false" maxCachedResults="25"> <providers> <add name="SPFormAuthRoleManager" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" applicationName="FormAuthApplication" connectionStringName="FormAuthConnString" /> </providers> </roleManager> <membership userIsOnlineTimeWindow="15" hashAlgorithmType=""> <providers> <add name="SPFormAuthMembership" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" applicationName="FormAuthApplication" connectionStringName="FormAuthConnString" /> </providers> </membership> </system.web> See the snapshot of the web.config after adding the required elements. After adding this, you should be able to login using the credentials from SQL server. Try assigning a user as primary/secondary administrator for your site collection from Central Administration and login to your site using form authentication. If you made everything correct, you should be able to login. This means you have successfully completed configuration of STS Configuration of Web Application for Form Authentication As a last step, you need to modify the web.config of the form authentication web application. Once you have done this, you should be able to grant permissions to users stored in the membership database. Open the Web.config of the web application you created for form authentication. You can find the web.config for the application under the path C:\inetpub\wwwroot\wss\VirtualDirectories\<port number> Basically you need to add connection string, membership provider, role manager and update the people picker wild card configuration. Add the connection string (same as the one you added to the web.config in Central Administration). See the screenshot after the connection string has added. Search for <membership> in the web.config, you will find this inside system.web element. There will be other providers already available there. You add your form authentication membership provider (similar to the one added to Central Administration web.config) to the provider element under membership. Find the snapshot of membership configuration as follows. Search for <roleManager> element in web.config, add the new provider name under providers section of the roleManager element. See the snapshot of web.config after new provider added. Now you need to configure the peoplepickerwildcard configuration in web.config. As I specified earlier, this is to make sure, you can locate the users by entering a part of their username. Add the following line under the <PeoplePickerWildcards> element in web.config. See the screenshot of the peoplePickerWildcards element after the element has been added. Now you have completed all the setup for form authentication. Navigate to the web application. From the site actions -> site settings -> go to peope and groups Click on new -> add users, it will popup the people picker dialog. Click on the icon, select Form Auth, enter a username in the search textbox, and click on search icon. See the screenshot of admin search when I tried searching the users If it displays the user, it means you are done with the configuration. If you add users to the form authentication database, the users will be able to access SharePoint portal as normal.

  Read the article

• Fed Authentication Methods in OIF / IdP

  - by Damien Carru

  This article is a continuation of my previous entry where I explained how OIF/IdP leverages OAM to authenticate users at runtime: OIF/IdP internally forwards the user to OAM and indicates which Authentication Scheme should be used to challenge the user if needed OAM determine if the user should be challenged (user already authenticated, session timed out or not, session authentication level equal or higher than the level of the authentication scheme specified by OIF/IdP…) After identifying the user, OAM internally forwards the user back to OIF/IdP OIF/IdP can resume its operation In this article, I will discuss how OIF/IdP can be configured to map Federation Authentication Methods to OAM Authentication Schemes: When processing an Authn Request, where the SP requests a specific Federation Authentication Method with which the user should be challenged When sending an Assertion, where OIF/IdP sets the Federation Authentication Method in the Assertion Enjoy the reading! Overview The various Federation protocols support mechanisms allowing the partners to exchange information on: How the user should be challenged, when the SP/RP makes a request How the user was challenged, when the IdP/OP issues an SSO response When a remote SP partner redirects the user to OIF/IdP for Federation SSO, the message might contain data requesting how the user should be challenged by the IdP: this is treated as the Requested Federation Authentication Method. OIF/IdP will need to map that Requested Federation Authentication Method to a local Authentication Scheme, and then invoke OAM for user authentication/challenge with the mapped Authentication Scheme. OAM would authenticate the user if necessary with the scheme specified by OIF/IdP. Similarly, when an IdP issues an SSO response, most of the time it will need to include an identifier representing how the user was challenged: this is treated as the Federation Authentication Method. When OIF/IdP issues an Assertion, it will evaluate the Authentication Scheme with which OAM identified the user: If the Authentication Scheme can be mapped to a Federation Authentication Method, then OIF/IdP will use the result of that mapping in the outgoing SSO response: AuthenticationStatement in the SAML Assertion OpenID Response, if PAPE is enabled If the Authentication Scheme cannot be mapped, then OIF/IdP will set the Federation Authentication Method as the Authentication Scheme name in the outgoing SSO response: AuthenticationStatement in the SAML Assertion OpenID Response, if PAPE is enabled Mappings In OIF/IdP, the mapping between Federation Authentication Methods and Authentication Schemes has the following rules: One Federation Authentication Method can be mapped to several Authentication Schemes In a Federation Authentication Method <-> Authentication Schemes mapping, a single Authentication Scheme is marked as the default scheme that will be used to authenticate a user, if the SP/RP partner requests the user to be authenticated via a specific Federation Authentication Method An Authentication Scheme can be mapped to a single Federation Authentication Method Let’s examine the following example and the various use cases, based on the SAML 2.0 protocol: Mappings defined as: urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapped to LDAPScheme, marked as the default scheme used for authentication BasicScheme urn:oasis:names:tc:SAML:2.0:ac:classes:X509 mapped to X509Scheme, marked as the default scheme used for authentication Use cases: SP sends an AuthnRequest specifying urn:oasis:names:tc:SAML:2.0:ac:classes:X509 as the RequestedAuthnContext: OIF/IdP will authenticate the use with X509Scheme since it is the default scheme mapped for that method. SP sends an AuthnRequest specifying urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the RequestedAuthnContext: OIF/IdP will authenticate the use with LDAPScheme since it is the default scheme mapped for that method, not the BasicScheme SP did not request any specific methods, and user was authenticated with BasisScheme: OIF/IdP will issue an Assertion with urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the FederationAuthenticationMethod SP did not request any specific methods, and user was authenticated with LDAPScheme: OIF/IdP will issue an Assertion with urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the FederationAuthenticationMethod SP did not request any specific methods, and user was authenticated with BasisSessionlessScheme: OIF/IdP will issue an Assertion with BasisSessionlessScheme as the FederationAuthenticationMethod, since that scheme could not be mapped to any Federation Authentication Method (in this case, the administrator would need to correct that and create a mapping) Configuration Mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. Authentication Schemes As discussed in the previous article, during Federation SSO, OIF/IdP will internally forward the user to OAM for authentication/verification and specify which Authentication Scheme to use. OAM will determine if a user needs to be challenged: If the user is not authenticated yet If the user is authenticated but the session timed out If the user is authenticated, but the authentication scheme level of the original authentication is lower than the level of the authentication scheme requested by OIF/IdP So even though an SP requests a specific Federation Authentication Method to be used to challenge the user, if that method is mapped to an Authentication Scheme and that at runtime OAM deems that the user does not need to be challenged with that scheme (because the user is already authenticated, session did not time out, and the session authn level is equal or higher than the one for the specified Authentication Scheme), the flow won’t result in a challenge operation. Protocols SAML 2.0 The SAML 2.0 specifications define the following Federation Authentication Methods for SAML 2.0 flows: urn:oasis:names:tc:SAML:2.0:ac:classes:unspecified urn:oasis:names:tc:SAML:2.0:ac:classes:InternetProtocol urn:oasis:names:tc:SAML:2.0:ac:classes:Telephony urn:oasis:names:tc:SAML:2.0:ac:classes:MobileOneFactorUnregistered urn:oasis:names:tc:SAML:2.0:ac:classes:PersonalTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:PreviousSession urn:oasis:names:tc:SAML:2.0:ac:classes:MobileOneFactorContract urn:oasis:names:tc:SAML:2.0:ac:classes:Smartcard urn:oasis:names:tc:SAML:2.0:ac:classes:Password urn:oasis:names:tc:SAML:2.0:ac:classes:InternetProtocolPassword urn:oasis:names:tc:SAML:2.0:ac:classes:X509 urn:oasis:names:tc:SAML:2.0:ac:classes:TLSClient urn:oasis:names:tc:SAML:2.0:ac:classes:PGP urn:oasis:names:tc:SAML:2.0:ac:classes:SPKI urn:oasis:names:tc:SAML:2.0:ac:classes:XMLDSig urn:oasis:names:tc:SAML:2.0:ac:classes:SoftwarePKI urn:oasis:names:tc:SAML:2.0:ac:classes:Kerberos urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport urn:oasis:names:tc:SAML:2.0:ac:classes:SecureRemotePassword urn:oasis:names:tc:SAML:2.0:ac:classes:NomadTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:AuthenticatedTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:MobileTwoFactorUnregistered urn:oasis:names:tc:SAML:2.0:ac:classes:MobileTwoFactorContract urn:oasis:names:tc:SAML:2.0:ac:classes:SmartcardPKI urn:oasis:names:tc:SAML:2.0:ac:classes:TimeSyncToken Out of the box, OIF/IdP has the following mappings for the SAML 2.0 protocol: Only urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport is defined This Federation Authentication Method is mapped to: LDAPScheme, marked as the default scheme used for authentication FAAuthScheme BasicScheme BasicFAScheme This mapping is defined in the saml20-sp-partner-profile SP Partner Profile which is the default OOTB SP Partner Profile for SAML 2.0 An example of an AuthnRequest message sent by an SP to an IdP with the SP requesting a specific Federation Authentication Method to be used to challenge the user would be: <samlp:AuthnRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol" Destination="https://idp.com/oamfed/idp/samlv20" ID="id-8bWn-A9o4aoMl3Nhx1DuPOOjawc-" IssueInstant="2014-03-21T20:51:11Z" Version="2.0">  <saml:Issuer ...>https://acme.com/sp</saml:Issuer>  <samlp:NameIDPolicy AllowCreate="false" Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified"/>  <samlp:RequestedAuthnContext Comparison="minimum">    <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion">      urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef>  </samlp:RequestedAuthnContext></samlp:AuthnRequest> An example of an Assertion issued by an IdP would be: <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                    urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> An administrator would be able to specify a mapping between a SAML 2.0 Federation Authentication Method and one or more OAM Authentication Schemes SAML 1.1 The SAML 1.1 specifications define the following Federation Authentication Methods for SAML 1.1 flows: urn:oasis:names:tc:SAML:1.0:am:unspecified urn:oasis:names:tc:SAML:1.0:am:HardwareToken urn:oasis:names:tc:SAML:1.0:am:password urn:oasis:names:tc:SAML:1.0:am:X509-PKI urn:ietf:rfc:2246 urn:oasis:names:tc:SAML:1.0:am:PGP urn:oasis:names:tc:SAML:1.0:am:SPKI urn:ietf:rfc:3075 urn:oasis:names:tc:SAML:1.0:am:XKMS urn:ietf:rfc:1510 urn:ietf:rfc:2945 Out of the box, OIF/IdP has the following mappings for the SAML 1.1 protocol: Only urn:oasis:names:tc:SAML:1.0:am:password is defined This Federation Authentication Method is mapped to: LDAPScheme, marked as the default scheme used for authentication FAAuthScheme BasicScheme BasicFAScheme This mapping is defined in the saml11-sp-partner-profile SP Partner Profile which is the default OOTB SP Partner Profile for SAML 1.1 An example of an Assertion issued by an IdP would be: <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">            <saml:Subject>                <saml:NameID ...>[email protected]</saml:NameID>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> Note: SAML 1.1 does not define an AuthnRequest message. An administrator would be able to specify a mapping between a SAML 1.1 Federation Authentication Method and one or more OAM Authentication Schemes OpenID 2.0 The OpenID 2.0 PAPE specifications define the following Federation Authentication Methods for OpenID 2.0 flows: http://schemas.openid.net/pape/policies/2007/06/phishing-resistant http://schemas.openid.net/pape/policies/2007/06/multi-factor http://schemas.openid.net/pape/policies/2007/06/multi-factor-physical Out of the box, OIF/IdP does not define any mappings for the OpenID 2.0 Federation Authentication Methods. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. An example of an OpenID 2.0 Request message sent by an SP/RP to an IdP/OP would be: https://idp.com/openid?openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=checkid_setup&openid.claimed_id=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.identity=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.realm=https%3A%2F%2Facme.com%2Fopenid&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_request&openid.ax.type.attr0=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.if_available=attr0&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.max_auth_age=0 An example of an Open ID 2.0 SSO Response issued by an IdP/OP would be: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will provide examples on how to configure OIF/IdP for the various protocols, to map OAM Authentication Schemes to Federation Authentication Methods.Cheers,Damien Carru

  Read the article

• IIS7 Mixed Mode Authentication

  - by drachenstern

  We're getting ready to start migrating some of our IIS6 sites to IIS7, and the application currently uses Forms Authentication. We have started getting some requests from various sites to use the Windows Authentication for the users. While this is easy enough to implement (and I've shown internally that there is no issue with the app, as expected) the question then is how to continue to keep Forms authentication for when Integrated Windows doesn't work. I've seen several walkthroughs on how to have it configured on IIS6, and I could do the same thing on IIS7, but then I have to turn on Classic Mode processing. Any solution should also be back portable to IIS6, if possible, to keep the build tree simple. So what are my options on this? Do I setup the app with Integrated Windows Authentication in IIS7, Forms Auth in the web.config, and redirect 401 errors to an "error page" allowing them to login using forms, then back to the regular app? The case when Forms is likely to be needed is going to be reserved for Contract workers, our support staff, and if someone needs to access it on their site from their Extranet. So primarily it's for our staff to login to check functionality and confirm bug reports. I suggested we just maintain that for our support staff to work, we need a Windows login that will always be live, and then we'll just enforce local responsibility on who can login to the site, but I'm told that we would do better to have Forms Authentication. Any thoughts? I can post some of the links of the articles I've already read through if that would help the forum better narrow my needs. Many thanks. tl;dr: How to do mixed mode authentication (forms, windows) in IIS7 without changing to classic pipeline and still be able to use the build in IIS6 if possible.

  Read the article

• Enabling Kerberos Authentication for Reporting Services

  - by robcarrol

  Recently, I’ve helped several customers with Kerberos authentication problems with Reporting Services and Analysis Services, so I’ve decided to write this blog post and pull together some useful resources in one place (there are 2 whitepapers in particular that I found invaluable configuring Kerberos authentication, and these can be found in the references section at the bottom of this post). In most of these cases, the problem has manifested itself with the Login failed for User ‘NT Authority\Anonymous’ (“double-hop”) error. By default, Reporting Services uses Windows Integrated Authentication, which includes the Kerberos and NTLM protocols for network authentication. Additionally, Windows Integrated Authentication includes the negotiate security header, which prompts the client to select Kerberos or NTLM for authentication. The client can access reports which have the appropriate permissions by using Kerberos for authentication. Servers that use Kerberos authentication can impersonate those clients and use their security context to access network resources. You can configure Reporting Services to use both Kerberos and NTLM authentication; however this may lead to a failure to authenticate. With negotiate, if Kerberos cannot be used, the authentication method will default to NTLM. When negotiate is enabled, the Kerberos protocol is always used except when: Clients/servers that are involved in the authentication process cannot use Kerberos. The client does not provide the information necessary to use Kerberos. An in-depth discussion of Kerberos authentication is beyond the scope of this post, however when users execute reports that are configured to use Windows Integrated Authentication, their logon credentials are passed from the report server to the server hosting the data source. Delegation needs to be set on the report server and Service Principle Names (SPNs) set for the relevant services. When a user processes a report, the request must go through a Web server on its way to a database server for processing. Kerberos authentication enables the Web server to request a service ticket from the domain controller; impersonate the client when passing the request to the database server; and then restrict the request based on the user’s permissions. Each time a server is required to pass the request to another server, the same process must be used. Kerberos authentication is supported in both native and SharePoint integrated mode, but I’ll focus on native mode for the purpose of this post (I’ll explain configuring SharePoint integrated mode and Kerberos authentication in a future post). Configuring Kerberos avoids the authentication failures due to double-hop issues. These double-hop errors occur when a users windows domain credentials can’t be passed to another server to complete the user’s request. In the case of my customers, users were executing Reporting Services reports that were configured to query Analysis Services cubes on a separate machine using Windows Integrated security. The double-hop issue occurs as NTLM credentials are valid for only one network hop, subsequent hops result in anonymous authentication. The client attempts to connect to the report server by making a request from a browser (or some other application), and the connection process begins with authentication. With NTLM authentication, client credentials are presented to Computer 2. However Computer 2 can’t use the same credentials to access Computer 3 (so we get the Anonymous login error). To access Computer 3 it is necessary to configure the connection string with stored credentials, which is what a number of customers I have worked with have done to workaround the double-hop authentication error. However, to get the benefits of Windows Integrated security, a better solution is to enable Kerberos authentication. Again, the connection process begins with authentication. With Kerberos authentication, the client and the server must demonstrate to one another that they are genuine, at which point authentication is successful and a secure client/server session is established. In the illustration above, the tiers represent the following: Client tier (computer 1): The client computer from which an application makes a request. Middle tier (computer 2): The Web server or farm where the client’s request is directed. Both the SharePoint and Reporting Services server(s) comprise the middle tier (but we’re only concentrating on native deployments just now). Back end tier (computer 3): The Database/Analysis Services server/Cluster where the requested data is stored. In order to enable Kerberos authentication for Reporting Services it’s necessary to configure the relevant SPNs, configure trust for delegation for server accounts, configure Kerberos with full delegation and configure the authentication types for Reporting Services. Service Principle Names (SPNs) are unique identifiers for services and identify the account’s type of service. If an SPN is not configured for a service, a client account will be unable to authenticate to the servers using Kerberos. You need to be a domain administrator to add an SPN, which can be added using the SetSPN utility. For Reporting Services in native mode, the following SPNs need to be registered --SQL Server Service SETSPN -S mssqlsvc/servername:1433 Domain\SQL For named instances, or if the default instance is running under a different port, then the specific port number should be used. --Reporting Services Service SETSPN -S http/servername Domain\SSRS SETSPN -S http/servername.domain.com Domain\SSRS The SPN should be set for the NETBIOS name of the server and the FQDN. If you access the reports using a host header or DNS alias, then that should also be registered SETSPN -S http/www.reports.com Domain\SSRS --Analysis Services Service SETSPN -S msolapsvc.3/servername Domain\SSAS Next, you need to configure trust for delegation, which refers to enabling a computer to impersonate an authenticated user to services on another computer: Location Description Client 1. The requesting application must support the Kerberos authentication protocol. 2. The user account making the request must be configured on the domain controller. Confirm that the following option is not selected: Account is sensitive and cannot be delegated. Servers 1. The service accounts must be trusted for delegation on the domain controller. 2. The service accounts must have SPNs registered on the domain controller. If the service account is a domain user account, the domain administrator must register the SPNs. In Active Directory Users and Computers, verify that the domain user accounts used to access reports have been configured for delegation (the ‘Account is sensitive and cannot be delegated’ option should not be selected): We then need to configure the Reporting Services service account and computer to use Kerberos with full delegation:   We also need to do the same for the SQL Server or Analysis Services service accounts and computers (depending on what type of data source you are connecting to in your reports). Finally, and this is the part that sometimes gets over-looked, we need to configure the authentication type correctly for reporting services to use Kerberos authentication. This is configured in the Authentication section of the RSReportServer.config file on the report server. <Authentication> <AuthenticationTypes>           <RSWindowsNegotiate/> </AuthenticationTypes> <EnableAuthPersistence>true</EnableAuthPersistence> </Authentication> This will enable Kerberos authentication for Internet Explorer. For other browsers, see the link below. The report server instance must be restarted for these changes to take effect. Once these changes have been made, all that’s left to do is test to make sure Kerberos authentication is working properly by running a report from report manager that is configured to use Windows Integrated authentication (either connecting to Analysis Services or SQL Server back-end). Resources: Manage Kerberos Authentication Issues in a Reporting Services Environment http://download.microsoft.com/download/B/E/1/BE1AABB3-6ED8-4C3C-AF91-448AB733B1AF/SSRSKerberos.docx Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=23176 How to: Configure Windows Authentication in Reporting Services http://msdn.microsoft.com/en-us/library/cc281253.aspx RSReportServer Configuration File http://msdn.microsoft.com/en-us/library/ms157273.aspx#Authentication Planning for Browser Support http://msdn.microsoft.com/en-us/library/ms156511.aspx

  Read the article

• Disable authentication on subfolder(s) of an ASP.NET app using windows authentication

  - by Bert Vandamme

  Hi, Is it possible to disable windows authentication on one or more subfolders of an ASP.net application using windows authentication?

  Read the article

• Sharing authentication methods across API and web app

  - by Snixtor

  I'm wanting to share an authentication implementation across a web application, and web API. The web application will be ASP.NET (mostly MVC 4), the API will be mostly ASP.NET WEB API, though I anticipate it will also have a few custom modules or handlers. I want to: Share as much authentication implementation between the app and API as possible. Have the web application behave like forms authentication (attractive log-in page, logout option, redirect to / from login page when a request requires authentication / authorisation). Have API callers use something closer to standard HTTP (401 - Unauthorized, not 302 - Redirect). Provide client and server side logout mechanisms that don't require a change of password (so HTTP basic is out, since clients typically cache their credentials). The way I'm thinking of implementing this is using plain old ASP.NET forms authentication for the web application, and pushing another module into the stack (much like MADAM - Mixed Authentication Disposition ASP.NET Module). This module will look for some HTTP header (implementation specific) which indicates "caller is API". If the header "caller is API" is set, then the service will respond differently than standard ASP.NET forms authentication, it will: 401 instead of 302 on a request lacking authentication. Look for username + pass in a custom "Login" HTTP header, and return a FormsAuthentication ticket in a custom "FormsAuth" header. Look for FormsAuthentication ticket in a custom "FormsAuth" header. My question(s) are: Is there a framework for ASP.NET that already covers this scenario? Are there any glaring holes in this proposed implementation? My primary fear is a security risk that I can't see, but I'm similarly concerned that there may be something about such an implementation that will make it overly restrictive or clumsy to work with.

  Read the article

• Bypass proxy authentication [closed]

  - by Diego Queiroz

  My scenario: My network has a proxy that requires interative authentication. When I access any URL, an username and password is requested to enable navigation. I do have a valid username/password (this means I have permissions to access external content). I do not have access to the proxy server (any change to the proxy server is not an option). What I need: I need to bypass the interative authentication process and make it an automated authentication process. What I do NOT need/want: I do not need/want to hack the network. I do not need/want to access unauthorized content. In other words, I just need to find a way to "save" my password in the computer (security is not a problem) to allow application that does not support this kind of interative authentication to access the internet (like non-browser software that also uses HTTP port). My guess: My guess is to develop a new proxy server that will run in the local machine (eg, a proxy for the network proxy). This proxy server will access my network proxy, authenticate and forward the content. Of course this is a last resort. I prefer to not need to develop a proxy server. Does someone know other solution? (any operating system)

  Read the article

• What does Provider mean in asp.net ?

  - by Mostafa

  Hi I've got confused . We hear a lot about Provider in ASP.NET . Membership-Provider , Role Provider , XmlDataProvider ,CustomProvider, .... What are those and why we need them in ASP.NET ?

  Read the article

• Domain authentication used for kerberos based authentication of users on my server

  - by J G

  Suppose a user process has authenticated itself against domain's directory server via kerberos, and then attempts opens a network socket to my server application. My server application has a white-list of users from the domain directory server. How does my server app authenticate the user from the directory based on this socket opening attempt? (To keep things simple - let's say my server is written in Java, and the directory server is Active Directory) EDIT My question is about how the client asks for an authentication token.

  Read the article

• NIS client authentication

  - by Tarun Gupta

  How to configure the nis client on ubuntu? and how to configure system authentication? there is no option for system authentication like system setting system info in my system etc. when ever i go to software center and search them nis authentication then i got one package for nis authentication and i try to install them then one error occur that is remove hostname utility. when i try to remove hostname utility then it does not remove.

  Read the article

• Membership provider stopped working on using Membership Provider in ASP.Net MVC

  - by Michael Meadows

  I have a production ASP.Net MVC application that has been using the membership service. It has worked fine, up until today. Nothing has changed on the server, but I now have this error: System.Configuration.Provider.ProviderException: The 'System.Web.Security.SqlMembershipProvider' requires a database schema compatible with schema version '1'. However, the current database schema is not compatible with this version. You may need to either install a compatible schema with aspnet_regsql.exe (available in the framework installation directory), or upgrade the provider to a newer version. I checked the asp_schemaversions table, and it looks fine. Please any help would be appreciated.

  Read the article

• Windows Authentication behaves oddly when VPN'd

  - by Dan F

  Hi all We've got a few apps that rely on windows authentication - a couple of web apps with AD auth turned on and we usually connect to our SQL servers with windows auth. This normally runs without a hitch. It doesn't work so well if we're VPN'd to a client site though. SSMS Opening SSMS normally from the start menu, then picking a server that normally accepts windows auth, results in a message saying: Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. (.Net SqlClient Data Provider) If I drop to a command prompt and use runas /user:domain\user to launch SSMS I can successfully windows auth to our SQL server instances with that ssms process. If I look in task manager, both copies of ssms.exe (start menu vs runas) have the same user, and I can see no discernible differences between the processes in procexp. AD Auth websites If I open IE and browse to any of our websites that require an authenticated windows user, I get the "who are you" prompt, and that dialog thinks I'm whoever the VPN user is. I can click "Use another account" and authenticate that way though. Outlook Even Outlook prompts for a username when we are VPN'd! It's affecting our Win7 and Vista machines. It's been a while since we had an XP box, but I don't recall having this issue on XP for what it's worth. The VPN connections are just using the built in windows VPN connections, they're not fancy cisco VPNs or anything of that nature. Does anyone know how to tell windows that I'd like to be my normal old primary domain user rather than the VPN user when authenticating to resources in our domain? Heck, I'd be happy with a solution that prompted me with the "who are you" if I was trying to access windows auth requiring resources on the client's VPN. Thanks! Apologies if this is more a superuser question, I wasn't sure which site it best suited. It's about networking and infrastructure and plagues all of our developers here, so I hope it's a serverfault Q.

  Read the article

• Troubleshooting Windows Authentication problems (no challenge) in IIS 7.5?

  - by Aaronaught

  I know that there are thousands of reports of people having trouble getting Integrated Windows Authentication to work with IIS, but they all seem to lead to web pages that don't apply or solutions that I've already tried. I've deployed dozens of sites like this before, so either there's something bizarre going on with the server/configuration, or I've been looking at this too long and not seeing the obvious. Simply put, everything works perfectly on my local machine, but falls apart on the production server, which as far as I can tell has the exact same configuration. On the local machine: The machine is running Windows 7 Ultimate, Service Pack 1, IIS 7.5. The site has been tested successfully, using both IIS and the VS Web Development Server. The IIS site config has all authentication methods disabled except Windows Authentication. The local machine is not on any domain. The Providers set up are Negotiate and NTLM (not Negotiate:Kerberos). Extended Protection is Off. All browsers tested (IE, Firefox, Chrome) show the challenge prompt and allow me to log in to the localhost domain with my (local) Windows account. All browsers tested also work using an opaque local IP address - so the browsers themselves don't seem to care whether the site appears "local" or "remote". I've added a display line to the web page which shows the currently-logged-in user and it shows exactly what I would expect (whichever local user I logged in with). On the remote machine: The server is running Windows Server 2008 R2, IIS 7.5. Loading the web page results in an immediate 401.2 error: You are not authorized to view this page due to invalid authentication headers. No challenge prompt ever appears. The IIS site config has all authentication methods disabled except Windows Authentication. The remote machine is not on any domain. The Providers set up are Negotiate and NTLM (not Negotiate:Kerberos). Extended Protection is Off. On the remote machine (remote desktop session), the same error appears in Internet Explorer regardless of whether the domain is localhost or the external IP address. If I try to view the remote web site from my local machine, the error is still 401, but a slightly different 401. No subcode, with the text: Access is denied due to invalid credentials. The Windows Authentication IIS role feature is installed. The WindowsAuthentication Module is added (at the Server level). The exact same error occurs if I turn off Windows Authentication and enable Basic Authentication. The site does load if I turn off Windows Authentication and enable Anonymous (obviously). I've already followed all of the troubleshooting steps on Microsoft Support: Troubleshooting HTTP 401 errors in IIS I've already tried the workaround shown on another Microsoft support page (supposedly to force NTLM as the only method). Last but not least, I tried turning on FREB for 401.2 errors and the results don't seem to tell me anything useful, all I see is the following warning: MODULE_SET_RESPONSE_ERROR_STATUS ModuleName IIS Web Core Notification 2 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 2 ErrorCode 2147942405 ConfigExceptionInfo Notification AUTHENTICATE_REQUEST ErrorCode Access is denied. (0x80070005) ...this seems to just be telling me what I already know (that it's simply rejecting the request instead of negotiating the credentials). The trace does indicate that the WindowsAuthentication module is correctly loaded because there is a NOTIFY_MODULE_START line with ModuleName = WindowsAuthentication (and various other ASP.NET follow-up events - [un]fortunately, no interesting errors or warnings here). Can anyone tell me what I might be missing here? Quick Update: I'm a little uncomfortable sending a whole Wireshark dump as it would reveal IPs, URLs and other stuff, but I did a side-by-side comparison of the HTTP responses from localhost and the remote server in Fiddler, and it seems fairly self-evident what the problem is: Localhost: HTTP/1.1 401 Unauthorized Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM X-Powered-By: ASP.NET Date: Sat, 17 Dec 2011 23:42:34 GMT Content-Length: 6399 Proxy-Support: Session-Based-Authentication Remote: HTTP/1.1 401 Unauthorized Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Sat, 17 Dec 2011 23:43:13 GMT Content-Length: 1293 Aside from a few seemingly-inconsequential differences like cache-control, the main difference is that the remote server is not sending the WWW-Authenticate headers back to the client. So, I guess that narrows the question down to: Why is IIS not sending WWW-Authenticate headers when Windows Authentication appears to be installed, loaded, and exclusively enabled?

  Read the article

• Replacing ASP.NET Forms Authentication with WIF Session Authentication (for the better)

  - by Your DisplayName here!

  ASP.NET Forms Authentication and WIF Session Authentication (which has *nothing* to do with ASP.NET sessions) are very similar. Both inspect incoming requests for a special cookie that contains identity information, if that cookie is present it gets validated and if that is successful, the identity information is made available to the application via HttpContext.User/Thread.CurrentPrincipal. The main difference between the two is the identity to cookie serialization engine that sits below. Whereas ForsmAuth can only store the name of the user and an additional UserData string. It is limited to a single cookie and hardcoded to protection via the machine key. WIF session authentication in turn has these additional features: Can serialize a complete ClaimsPrincipal (including claims) to the cookie(s). Has a cookie overflow mechanism when data gets too big. In total it can create up to 8 cookies (á 4 KB) per domain (not that I would recommend round tripping that much data). Supports server side caching (which is an extensible mechanism). Has an extensible mechanism for protection (DPAPI by default, RSA as an option for web farms, and machine key based protection is coming in .NET 4.5) So in other words – session authentication is the superior technology, and if done cleverly enough you can replace FormsAuth without any changes to your application code. The only features missing is the redirect mechanism to a login page and an easy to use API to set authentication cookies. But that’s easy to add ;) FormsSessionAuthenticationModule This module is a sub class of the standard WIF session module, adding the following features: Handling EndRequest to do the redirect on 401s to the login page configured for FormsAuth. Reads the FormsAuth cookie name, cookie domain, timeout and require SSL settings to configure the module accordingly. Implements sliding expiration if configured for FormsAuth. It also uses the same algorithm as FormsAuth to calculate when the cookie needs renewal. Implements caching of the principal on the server side (aka session mode) if configured in an AppSetting. Supports claims transformation via a ClaimsAuthenticationManager. As you can see, the whole module is designed to easily replace the FormsAuth mechanism. Simply set the authentication mode to None and register the module. In the spirit of the FormsAuthentication class, there is also now a SessionAuthentication class with the same methods and signatures (e.g. SetAuthCookie and SignOut). The rest of your application code should not be affected. In addition the session module looks for a HttpContext item called “NoRedirect”. If that exists, the redirect to the login page will *not* happen, instead the 401 is passed back to the client. Very useful if you are implementing services or web APIs where you want the actual status code to be preserved. A corresponding UnauthorizedResult is provided that gives you easy access to the context item. The download contains a sample app, the module and an inspector for session cookies and tokens. Let’s hope that in .NET 4.5 such a module comes out of the box. HTH

  Read the article

• Forms authentication for users and Windows for Database?

  - by scyonx

  On our production servers, the admins created a WebUser active directory account which is users for anonymous access to IIS and is also used to authenticate database access with our SQL Server instances using Integrated Security=SSPI in the connection string and identity impersonate="true" in the web.config. I've often come across situations where I would like to or even need to use forms authentication. However, I using forms authentication, Integrated Security seems to use the logged in user's credentials to authenticate against the database. In these cases I have changed the connection string to use the credentials of a SQL Server users instead. I would prefer to not have a hard coded username and password in the connection string or rather worse in code. Is it possible to use forms authentication just for user authentication for users and windows authentication with the IIS user for database access? What would be the best practice in such a situation?

  Read the article

• Disable authentication on subfolder(s) of an ASP.NET app using windows authentication

  - by Bert Vandamme

  Hi, Is it possible to disable windows authentication on one or more subfolders of an ASP.net application using windows authentication?

  Read the article

• Authentication failure!

  - by veera

  At the time of installation i gave login password and that was the login keyring password and authentication password.. then once in user accounts-login options in dat for password options i set as none and then i locked.. after that the passwd which i gave at the time of installation remained as login keyring passwd but wen i entered that passwd for authentication while installing some packages it's showing authentication failure.pls try again.. so i couldnt download any packages or updates.. is there any possibilities to change/reset the authentication password.. pls help me..

  Read the article

• windows authentication vs sql server authentication for asp.net forms authentication site

  - by Brij

  I have a database and a site having forms authentication. It is working fine with VS2008. This time, I am using "Trusted_connection =True". But when it is opened from outside or directly from browser then I am getting error "Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'." I know this is due to permission. SQL server is based on windows authentication. What is the best approach to manage user to connect sql server? Should I enable sql server authentication? Let me know what to do so that it makes the production feel and there wouldn't be any problem during deployment. Note: Sql server is installed on domain server.

  Read the article

• ASP.NET - Manual authentication system

  - by Gal V

  Hello all, Wer'e developing an ASP.NET C# application, which will contain an authentication system that authenticates users in multiple levels (user, admin, super-admin, etc.). Our idea is NOT to use the built in ASP.NET forms authentication feature. Our plan is to create a whole 'new' system for it- based on the Session object, and SQL database contains users' info such as username & password. Is there any SERIOUS different between our idea to the Forms authentication feature? What security risks do we take? How do we solve them? Is this a good alternative for the forms authentication feature? Thanks in advance !

  Read the article

• Token based Authentication for WCF HTTP/REST Services: Authentication

  - by Your DisplayName here!

  This post shows some of the implementation techniques for adding token and claims based security to HTTP/REST services written with WCF. For the theoretical background, see my previous post. Disclaimer The framework I am using/building here is not the only possible approach to tackle the problem. Based on customer feedback and requirements the code has gone through several iterations to a point where we think it is ready to handle most of the situations. Goals and requirements The framework should be able to handle typical scenarios like username/password based authentication, as well as token based authentication The framework should allow adding new supported token types Should work with WCF web programming model either self-host or IIS hosted Service code can rely on an IClaimsPrincipal on Thread.CurrentPrincipal that describes the client using claims-based identity Implementation overview In WCF the main extensibility point for this kind of security work is the ServiceAuthorizationManager. It gets invoked early enough in the pipeline, has access to the HTTP protocol details of the incoming request and can set Thread.CurrentPrincipal. The job of the SAM is simple: Check the Authorization header of the incoming HTTP request Check if a “registered” token (more on that later) is present If yes, validate the token using a security token handler, create the claims principal (including claims transformation) and set Thread.CurrentPrincipal If no, set an anonymous principal on Thread.CurrentPrincipal. By default, anonymous principals are denied access – so the request ends here with a 401 (more on that later). To wire up the custom authorization manager you need a custom service host – which in turn needs a custom service host factory. The full object model looks like this: Token handling A nice piece of existing WIF infrastructure are security token handlers. Their job is to serialize a received security token into a CLR representation, validate the token and turn the token into claims. The way this works with WS-Security based services is that WIF passes the name/namespace of the incoming token to WIF’s security token handler collection. This in turn finds out which token handler can deal with the token and returns the right instances. For HTTP based services we can do something very similar. The scheme on the Authorization header gives the service a hint how to deal with an incoming token. So the only missing link is a way to associate a token handler (or multiple token handlers) with a scheme and we are (almost) done. WIF already includes token handler for a variety of tokens like username/password or SAML 1.1/2.0. The accompanying sample has a implementation for a Simple Web Token (SWT) token handler, and as soon as JSON Web Token are ready, simply adding a corresponding token handler will add support for this token type, too. All supported schemes/token types are organized in a WebSecurityTokenHandlerCollectionManager and passed into the host factory/host/authorization manager. Adding support for basic authentication against a membership provider would e.g. look like this (in global.asax): var manager = new WebSecurityTokenHandlerCollectionManager(); manager.AddBasicAuthenticationHandler((username, password) => Membership.ValidateUser(username, password));   Adding support for Simple Web Tokens with a scheme of Bearer (the current OAuth2 scheme) requires passing in a issuer, audience and signature verification key: manager.AddSimpleWebTokenHandler(     "Bearer",     "http://identityserver.thinktecture.com/trust/initial",     "https://roadie/webservicesecurity/rest/",     "WFD7i8XRHsrUPEdwSisdHoHy08W3lM16Bk6SCT8ht6A="); In some situations, SAML token may be used as well. The following configures SAML support for a token coming from ADFS2: var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri("https://roadie/webservicesecurity/rest/")); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from config) adfsConfig.ServiceTokenResolver = IdentityModelConfiguration.ServiceConfiguration.CreateAggregateTokenResolver();             manager.AddSaml11SecurityTokenHandler("SAML", adfsConfig);   Transformation The custom authorization manager will also try to invoke a configured claims authentication manager. This means that the standard WIF claims transformation logic can be used here as well. And even better, can be also shared with e.g. a “surrounding” web application. Error handling A WCF error handler takes care of turning “access denied” faults into 401 status codes and a message inspector adds the registered authentication schemes to the outgoing WWW-Authenticate header when a 401 occurs. The next post will conclude with authorization as well as the source code download.   (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

  Read the article

• Different behaviour with windows authentication on IIS7 websites

  - by amaters

  I need to run a website with just windows authentication. Given the following situation: The location of the default website is: c:\inetpub\wwwroot The location of my code is: c:\Sites\WebApp my hostfile is edited so any .local i use points to 127.0.0.1 I have created a new application called 'AppX' underneath the default website and point it to c:\Sites\WebApp. It will use the DefaultappPool. When I switch off anonymous and switch on windows authentication all works well when I go to localhost/AppX/. What i really want is a new website (No need to question why I want this). So I created Website2 and did exact the same creation of the application. Everything is the same; destination, app pool and authentication. Now when I browse to this website web2.local/AppX/ I get the 401.2 - Unauthorized error. What am I missing here?

  Read the article

• Audiencing with Forms-Based Authentication (FBA)

  - by PeterBrunone

  This really is no different from when you create an audience with regular old NTLM (Windows Authentication).  The difference is that while the AD provider is set up by default in all environments, the extra membership provider (that you use for Forms Authentication) isn't included anywhere except in the web application where you install it.  To be able to find your FBA users in the audience creation tool, you'll need to add the extra membership provider(s) to the web.config for your SSP site in IIS.  At that point, the People Picker should start recognizing your Forms Auth users, and you can create your audience as needed.

  Read the article

• Approach for replacing forms authentication in .NET application

  - by Ash Machine

  My question is about an approach, and I am looking for tips or links to help me develop a solution. I have an .NET 4.0 web forms application that works with Forms authentication using the aspnetdb SQL database of users and passwords. A new feature for the application is a new authentication mechanism using single sign on to allow access for thousands of new users. Essentially, when the user logs in through the new single-sign-on method, I will be able to identify them as legitimate users with a role. So I will have something like HttpContext.Current.Session["email_of_authenticated_user"] (their identity) and HttpContext.Current.Session["role_of_authenticated_user"] (their role). Importantly, I don't necessarily want to maintain these users and roles redundantly in the aspnetdb database which will be retired, but I do want to use the session objects above to allow the user to pass through the application as if they were in passing through with forms authentication. I don't think CustomRoleProviders or CustomMemberProviders are helpful since they do not allow for creating session-level users. So my question is how to use the session level user and role that I do have to "mimic" all the forms authentication goodness like enforcing: [System.Security.Permissions.PrincipalPermission(System.Security.Permissions.SecurityAction.Demand, Role = "Student")] or <authorization> <allow users="wilma, barney" /> </authorization> Thanks for any pointers.

  Read the article

• ASP.NET MVC authentication for iPhone application

  - by manu08

  This is for an ASP.NET MVC application. For browser based access on my normal controllers, I'm using standard forms authentication and auth cookies. My question is how I do the same for an iPhone application. I have a set of RESTful controllers that the iPhone application uses directly, but I'm not sure how to go about authentication... I was thinking of having a special Login method that returns the auth cookie. Then I can use the standard Authentication attribute on the ASP.NET MVC side, but I'm not sure how to handle this on the iPhone side? Can I store this cookie and have it automatically sent with every request? Perhaps there's a better approach altogether?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >