Search Results

Search found 175 results on 7 pages for 'autostart'.

Page 1/7 | 1 2 3 4 5 6 7  | Next Page >

  • Gnome Do does not autostart and save shortcuts

    - by Matt
    For some reason the autostart of Gnome-Do will not work in 11.10. I've installed Gnome-Do via the Ubuntu Software Center. Then I changed the shortcut to launch Gnome-Do and marked the option to autostart Gnome-Do within Gnome-Do. In order to verify the autostart, I checked whether it's also found in the autostart applications (which it was). However, upon every restart I have to start Gnome-Do manually via the unity launcher and change the shortcut again.

    Read the article

  • Gnome Do does not autostart and save shortcut in 11.10

    - by Matt
    For some reason the autostart of Gnome-Do will not work in 11.10. I've installed Gnome-Do via the Ubuntu Software Center. Then I changed the shortcut to launch Gnome-Do and marked the option to autostart Gnome-Do within Gnome-Do. In order to verify the autostart, I checked whether it's also found in the autostart applications (which it was). However, upon every restart I have to start Gnome-Do manually via the unity launcher and change the shortcut again.

    Read the article

  • Autostart app with proper icon in unity launcher

    - by kyleN
    One can autostart an application such that it launches on session start with an xdg desktop file in ~/.config/autostart (or /etc/xdg/autostart). But my application (a python/gtk/webkit/html5 app) when autostarted has a unity (and a unity-2d) launcher icon that is a gray question mark, even though: when I find it in dash, the dash shows the icon I specify in my main desktop file (in /usr/share/applications) when I launch it from dash, the launcher shows the icon I specify in my main desktop file when I add it as a favorite, the launcher shows the proper icon There are two cases where I get the gray question mark icon: autostart launch from terminal (this use case is not essential though and doesn't involve the desktop file anyway: but should/does ubuntu have an xdg desktop file interpreter à la #!/usr/bin/desktop or something) So: what is needed such unity (3d/2d) launcher panel shows the icon specified in an autostart desktop file?

    Read the article

  • I can't autostart xfce4 power manger lubuntu 13.10

    - by user203766
    I just upgraded my 64 bit lubuntu to 13.10 on my netbook today. After the upgrade, I simply can't autostart the xfce4 power manager. I tried to add from the desktop session settings, I tried to copy the power manager.desktop file to ~/.config/autostart folder. Everything looks fine, than I logout, log back in, and the darn power manager, just won't start automatically. It only starts when I double click the icon, or if i start it from the terminal. Help me please

    Read the article

  • Lubuntu: How do I autostart xfce4 power manager?

    - by user203766
    I just upgraded my 64 bit Lubuntu to 13.10 on my netbook today. After the upgrade, I simply can't autostart the xfce4 power manager. I tried to add from the desktop session settings, I tried to copy the power manager.desktop file to ~/.config/autostart folder. Everything looks fine. Then I logout, log back in and the darn power manager just won't start automatically. It only starts when I double click the icon, or if I start it from the terminal.

    Read the article

  • Unity doesn't autostart on second X screen

    - by Nonoo
    I have two Nvidia cards both with 2 heads and both configured as TwinView, so I have Screen0 and Screen1 in my xorg.conf. ccsm sees both screens (displays them in the Screens drop-down at the top left), but Unity starts only on Screen0 by default. The displays on Screen1 only show the default white screen and default X mouse cursor, when I hover over them. Is this the normal, expected behavior? Can I start Unity on Screen1 automatically without running custom shell scripts (like DISPLAY=:0.1 compiz --replace)?

    Read the article

  • How to autostart Kupfer in Ubuntu 13.10?

    - by JJD
    I built Kupfer from source on Ubuntu 13.10 and installed it into ./local. In the preferences I checked Start automatically on login. However, Kupfer does not automatically start. The desktop file in ~/.local/share/applications/kupfer.desktop looks like this: [Desktop Entry] Version=1.0 Name=Kupfer Name[cs]=Kupfer Name[da]=Kupfer Name[de]=Kupfer Name[el]=Kupfer Name[es]=Kupfer Name[eu]=Kupfer Name[fr]=Kupfer Name[gl]=Kupfer Name[hu]=Kupfer Name[it]=Kupfer Name[ko]=?? Name[nb]=Kupfer Name[nl]=Kupfer Name[pl]=Kupfer Name[pt]=Kupfer Name[pt_BR]=Kupfer Name[ru]=Kupfer Name[sl]=Kupfer Name[sv]=Kupfer Name[tr]=Kupfer Name[zh_CN]=Kupfer GenericName=Application Launcher GenericName[ca]=Llançador d'aplicació GenericName[cs]=Spouštec aplikací GenericName[da]=Programopstarter GenericName[de]=Anwendungsstarter GenericName[el]=??????t?? efa?µ???? GenericName[es]=Lanzador de aplicaciones GenericName[eu]=Aplikazioen abiarazlea GenericName[fr]=Lanceur d'applications GenericName[gl]=Iniciador de aplicativos GenericName[hu]=Alkalmazásindító GenericName[it]=Lanciatore di applicazioni GenericName[ko]=?? ???? ?? ??? GenericName[nb]=Programstarter GenericName[nl]=Programmastarter GenericName[pl]=Aktywator programów GenericName[pt]=Lançador de Aplicações GenericName[pt_BR]=Lançador de aplicativos GenericName[ru]=???????? ??????? ?????????? GenericName[sl]=Zaganjalnik programov GenericName[sv]=Programstartare GenericName[tr]=Uygulama Çalistirici GenericName[zh_CN]=????? Comment=Convenient command and access tool for applications and documents Comment[cs]=Nástroj pro pohodlné provádení príkazu a prístup k aplikacím a dokumentum Comment[da]=Nemt kommando- og adgangsværktøj til programmer og dokumenter Comment[de]=Praktisches Befehls- und Zugriffswerkzeug für Anwendungen und Dokumente Comment[el]=?????? e??a?e?? e?t???? ?a? p??sßas?? ??a efa?µ???? ?a? ????afa Comment[es]=Herramienta para acceso y manejo de aplicaciones y documentos Comment[eu]=Komando eta atzipen tresna egokia aplikazio eta dokumentuentzat Comment[fr]=Outil pratique pour accéder à des documents et lancer des applications Comment[gl]=Ferramenta cómoda para controlar e acceder a aplicativos e documentos Comment[hu]=Kényelmes parancs és hozzáférési eszköz az alkalmazásokhoz és dokumentumokhoz Comment[it]=Comodo comando e strumento di accesso per applicazioni e documenti Comment[ko]=???? ???????? ??? ???? ??? ?? ? ?? ?? Comment[nb]=Praktiskt kommandoverktøy for programmer og dokumenter Comment[nl]=Handige opdracht- en toegangshulp voor programma's en documenten Comment[pl]=Wygodne narzedzie do uruchamiania programów i otwierania dokumentów Comment[pt]=Ferramenta conveniente para acesso e gestão de aplicações e documentos Comment[pt_BR]=Uma conveniente ferramenta de comando e acesso para aplicativos e documentos Comment[ru]=??????? ?????????? ??? ???????? ??????? ? ?????????? ? ?????????? Comment[sl]=Prikladno orodje za izvajanje ukazov in dostopa do programov in dokumentov Comment[sv]=Praktiskt kommandoprogram för åtkomst av program och dokument Comment[zh_CN]=???????????????? Icon=kupfer Exec=python /home/user/.local/share/kupfer/kupfer.py %F Type=Application Categories=Utility; StartupNotify=true X-UserData=$CONFIG/kupfer;$DATA/kupfer;$CACHE/kupfer Terminal=false

    Read the article

  • How do I start VNC Server on boot?

    - by broiyan
    How do I create a system-wide autostart file? This would be on a cloud server running the desktop version of Maverick. I logged in as root and created an autostart file using System/Preferences/StartupApplications but it ended up in /root/.config/autostart and did not execute (as far as I can tell) upon rebooting. The autostart file is to invoke a bash script that invokes the VNC server. I copied the .desktop autostart file from /root/.config/autostart to /etc/xdg/autostart and rebooted. This did not seem to make a difference.

    Read the article

  • Android: Autostart app and load preferences

    - by BBoom
    Hi, I have a problem with initializing my app properly after the autostart. I've managed to get an autostart to work, after a reboot the app is shown as started but the timer's are not. My guess is that the "onCreate" function of MyApp is not called when I call the context.startService(). The timers are set in the doActivity() function of MyApp. I would greatly appreciate any tips on what I could be doing wrong or links to good tutorials. :) The manifest: <activity android:name=".MyApp" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <receiver android:name="MyApp_Receiver"> <intent-filter> <action android:name="android.intent.action.BOOT_COMPLETED" /> <category android:name="android.intent.category.DEFAULT" /> </intent-filter> </receiver>[/syntax] MyApp_Receiver is a BoradcastReciever with the following two functions public void onReceive(Context context, Intent intent) { // Do Autostart if intent is "BOOT_COMPLETED" if ((intent.getAction() != null) && (intent.getAction().equals("android.intent.action.BOOT_COMPLETED"))) { // Start the service context.startService(new Intent(context, MyApp.class)); } // Else do activity else MAIN_ACTIVITY.doActivity(); } public static void setMainActivity(MyApp activity) { MAIN_ACTIVITY = activity; } MyApp extends PreferenceActivity and has an onCreate() and a doActivity(), the doActivity() reads out the preferences and sets a timer depending on them. public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // Show preferences addPreferencesFromResource(R.xml.preferences);; // Register Preference Click Listeners getPreferenceScreen().getSharedPreferences().registerOnSharedPreferenceChangeListener(this); // Prepare for one-shot alarms if (mIntent == null) { mIntent = new Intent(MyApp.this, MyApp_Receiver.class); mSender = PendingIntent.getBroadcast(MyApp.this, 0, mIntent, 0); MyApp_Receiver.setMainActivity(this); } // Refresh and set all timers on start doActivity(); }

    Read the article

  • How to autostart this slide

    - by lchales
    Hello there: first of all i have no idea on coding or anything related, simple question: is there any simple way to tell this code to autostart the slide? at the current moment the images change on click. currently the index page only have one image, what i want is to add a few but without the need to click to see the next one here is the code from my index: <script type="text/javascript"> //<![CDATA[ /* the images preload plugin */ (function($) { $.fn.preload = function(options) { var opts = $.extend({}, $.fn.preload.defaults, options), o = $.meta ? $.extend({}, opts, this.data()) : opts; var c = this.length, l = 0; return this.each(function() { var $i = $(this); $('<img/>').load(function(i){ ++l; if(l == c) o.onComplete(); }).attr('src',$i.attr('src')); }); }; $.fn.preload.defaults = { onComplete : function(){return false;} }; })(jQuery); //]]> </script><script type="text/javascript"> //<![CDATA[ $(function() { var $tf_bg = $('#tf_bg'), $tf_bg_images = $tf_bg.find('img'), $tf_bg_img = $tf_bg_images.eq(0), $tf_thumbs = $('#tf_thumbs'), total = $tf_bg_images.length, current = 0, $tf_content_wrapper = $('#tf_content_wrapper'), $tf_next = $('#tf_next'), $tf_prev = $('#tf_prev'), $tf_loading = $('#tf_loading'); //preload the images $tf_bg_images.preload({ onComplete : function(){ $tf_loading.hide(); init(); } }); //shows the first image and initializes events function init(){ //get dimentions for the image, based on the windows size var dim = getImageDim($tf_bg_img); //set the returned values and show the image $tf_bg_img.css({ width : dim.width, height : dim.height, left : dim.left, top : dim.top }).fadeIn(); //resizing the window resizes the $tf_bg_img $(window).bind('resize',function(){ var dim = getImageDim($tf_bg_img); $tf_bg_img.css({ width : dim.width, height : dim.height, left : dim.left, top : dim.top }); }); //expand and fit the image to the screen $('#tf_zoom').live('click', function(){ if($tf_bg_img.is(':animated')) return false; var $this = $(this); if($this.hasClass('tf_zoom')){ resize($tf_bg_img); $this.addClass('tf_fullscreen') .removeClass('tf_zoom'); } else{ var dim = getImageDim($tf_bg_img); $tf_bg_img.animate({ width : dim.width, height : dim.height, top : dim.top, left : dim.left },350); $this.addClass('tf_zoom') .removeClass('tf_fullscreen'); } } ); //click the arrow down, scrolls down $tf_next.bind('click',function(){ if($tf_bg_img.is(':animated')) return false; scroll('tb'); }); //click the arrow up, scrolls up $tf_prev.bind('click',function(){ if($tf_bg_img.is(':animated')) return false; scroll('bt'); }); //mousewheel events - down / up button trigger the scroll down / up $(document).mousewheel(function(e, delta) { if($tf_bg_img.is(':animated')) return false; if(delta > 0) scroll('bt'); else scroll('tb'); return false; }); //key events - down / up button trigger the scroll down / up $(document).keydown(function(e){ if($tf_bg_img.is(':animated')) return false; switch(e.which){ case 38: scroll('bt'); break; case 40: scroll('tb'); break; } }); } //show next / prev image function scroll(dir){ //if dir is "tb" (top -> bottom) increment current, //else if "bt" decrement it current = (dir == 'tb')?current + 1:current - 1; //we want a circular slideshow, //so we need to check the limits of current if(current == total) current = 0; else if(current < 0) current = total - 1; //flip the thumb $tf_thumbs.flip({ direction : dir, speed : 400, onBefore : function(){ //the new thumb is set here var content = '<span id="tf_zoom" class="tf_zoom"><\/span>'; content +='<img src="' + $tf_bg_images.eq(current).attr('longdesc') + '" alt="Thumb' + (current+1) + '"/>'; $tf_thumbs.html(content); } }); //we get the next image var $tf_bg_img_next = $tf_bg_images.eq(current), //its dimentions dim = getImageDim($tf_bg_img_next), //the top should be one that makes the image out of the viewport //the image should be positioned up or down depending on the direction top = (dir == 'tb')?$(window).height() + 'px':-parseFloat(dim.height,10) + 'px'; //set the returned values and show the next image $tf_bg_img_next.css({ width : dim.width, height : dim.height, left : dim.left, top : top }).show(); //now slide it to the viewport $tf_bg_img_next.stop().animate({ top : dim.top },700); //we want the old image to slide in the same direction, out of the viewport var slideTo = (dir == 'tb')?-$tf_bg_img.height() + 'px':$(window).height() + 'px'; $tf_bg_img.stop().animate({ top : slideTo },700,function(){ //hide it $(this).hide(); //the $tf_bg_img is now the shown image $tf_bg_img = $tf_bg_img_next; //show the description for the new image $tf_content_wrapper.children() .eq(current) .show(); }); //hide the current description $tf_content_wrapper.children(':visible') .hide() } //animate the image to fit in the viewport function resize($img){ var w_w = $(window).width(), w_h = $(window).height(), i_w = $img.width(), i_h = $img.height(), r_i = i_h / i_w, new_w,new_h; if(i_w > i_h){ new_w = w_w; new_h = w_w * r_i; if(new_h > w_h){ new_h = w_h; new_w = w_h / r_i; } } else{ new_h = w_w * r_i; new_w = w_w; } $img.animate({ width : new_w + 'px', height : new_h + 'px', top : '0px', left : '0px' },350); } //get dimentions of the image, //in order to make it full size and centered function getImageDim($img){ var w_w = $(window).width(), w_h = $(window).height(), r_w = w_h / w_w, i_w = $img.width(), i_h = $img.height(), r_i = i_h / i_w, new_w,new_h, new_left,new_top; if(r_w > r_i){ new_h = w_h; new_w = w_h / r_i; } else{ new_h = w_w * r_i; new_w = w_w; } return { width : new_w + 'px', height : new_h + 'px', left : (w_w - new_w) / 2 + 'px', top : (w_h - new_h) / 2 + 'px' }; } }); //]]> </script>

    Read the article

  • Opensuse 11.1 KDE4 Dropbox autostart issue

    - by OpensuseNewbie
    I am using KDE4 with the lastest version of opensuse, and I want to autostart everytime I turn on my computer. I followed this website: http://antrix.net/journal/techtalk/dropbox%5Fkde.html I got dropbox to work and everything is fine. I created a symlink to the dropboxd file to my ~/.kde4/AUtostart, but does not work. The command line I used to create the symlink is: ln -s ~/.dropbox-dist/dropdoxd ~/.kde4/Autostart/ I've check the symlink itself to see where it "pointed to" in it's properties, and it was the right file. The drobox-dist folder is in my /home/"username", and the dropboxd does work. I've tried using "sudo ln -s ~/.dropbox-dist/dropdoxd ~/.kde4/Autostart/" but no symlink was created. I've checked other blogs and they all say the same things to make dropbox to autostart up, yet it is not working. Does anyone know what's wrong?

    Read the article

  • lxc containers fail to autoboot in 14.04 trusty using 'lxc.start.auto = 1'

    - by user273046
    In trusty 14.04 containers fail to autoboot despite all settings being set as 14.04 requires. They show all as STOPPED I have correctly configured 2 LXC containers: calypso encelado They run perfectly if I run sudo lxc-autostart then sudo lxc-ls --fancy results in: ubuntu@saturn:/etc/init$ sudo lxc-ls --fancy NAME STATE IPV4 IPV6 AUTOSTART calypso RUNNING 192.168.1.161 - YES encelado RUNNING 192.168.1.162 - YES The problem is trying to run them at boot. I have at: /var/lib/lxc/calypso/config: # Template used to create this container: /usr/share/lxc/templates/lxc-download # Parameters passed to the template: # For additional config options, please look at lxc.conf(5) # Distribution configuration lxc.include = /usr/share/lxc/config/ubuntu.common.conf lxc.arch = x86_64 # Container specific configuration lxc.rootfs = /var/lib/lxc/calypso/rootfs lxc.utsname = calypso # Network configuration lxc.network.type = veth lxc.network.flags = up #lxc.network.link = lxcbr0 lxc.network.link = br0 lxc.network.hwaddr = 00:16:3e:64:0b:6e # Assegnazione IP Address lxc.network.ipv4 = 192.168.1.161/24 lxc.network.ipv4.gateway = 192.168.1.1 # Autostart lxc.start.auto = 1 lxc.start.delay = 5 lxc.start.order = 100 and I have LXC_AUTO="false" as required inside /etc/default/lxc: LXC_AUTO="false" USE_LXC_BRIDGE="false" # overridden in lxc-net [ -f /etc/default/lxc-net ] && . /etc/default/lxc-net LXC_SHUTDOWN_TIMEOUT=120 Any idea on why the containers don't start at boot? At reboot they are always in the STOPPED state: ubuntu@saturn:~$ sudo lxc-ls --fancy NAME STATE IPV4 IPV6 AUTOSTART calypso STOPPED - - YES encelado STOPPED - - YES and then again they can be started manually, using sudo lxc-autostart

    Read the article

  • Kubuntu screensaver won't autostart

    - by Bumpalot
    Am using Ubuntu Lucid + kubuntu-desktop. NVidia works fine. Screensavers set to autostart & worked fine after initial install. Now screensaver attempted to start (brief flash of black only) but since quit doing that.. All screensavers work fine in Test mode. Is there a file entry that controls this?. kde/autostart is empty - should there be an entry here? Would the log files show up any relative errors? I am a newbie & the log info is way out of my league! Have not found any relative posts here or other forums. I would appreciate suggestions.

    Read the article

  • autostart app with tag in awm

    - by nonsenz
    while giving awm a try i encounter some problems. i want to autostart some apps when awm is started with specific tags. here's the relevant config i use for that. first my tags with layouts: tags = { names = {"mail", "www", "video", "files", 5, 6, 7, 8, 9}, layout = {layouts[11], layouts[11], layouts[11], layouts[11], layouts[1], layouts[1], layouts[1], layouts[1], layouts[1]} } for s = 1, screen.count() do -- Each screen has its own tag table. tags[s] = awful.tag(tags.names, s, tags.layout) end now the app-autostart stuff: awful.util.spawn("chromium-browser") awful.util.spawn("firefox") awful.util.spawn("vlc") awful.util.spawn_with_shell("xterm -name files -e mc") awful.util.spawn_with_shell("xterm -name 5term") awful.util.spawn_with_shell("xterm -name 5term") awful.util.spawn_with_shell("xterm -name 5term") awful.util.spawn_with_shell("xterm -name 5term") awful.util.spawn_with_shell("xfce4-power-manager") i use xterm with the -name param to give them custom classes (for custom tags via rules). and now some rules to connect apps with tags: awful.rules.rules = { -- All clients will match this rule. { rule = { }, properties = { border_width = beautiful.border_width, border_color = beautiful.border_normal, focus = true, keys = clientkeys, buttons = clientbuttons } }, { rule = { class = "MPlayer" }, properties = { floating = true } }, { rule = { class = "pinentry" }, properties = { floating = true } }, { rule = { class = "gimp" }, properties = { floating = true } }, -- Set Firefox to always map on tags number 2 of screen 1. -- { rule = { class = "Firefox" }, -- properties = { tag = tags[1][2] } }, { rule = { class = "Firefox" }, properties = { tag = tags[1][2] } }, { rule = { class = "Chromium-browser" }, properties = { tag = tags[1][1] } }, { rule = { class = "Vlc"}, properties = { tag = tags[1][3] } }, { rule = { class = "files"}, properties = { tag = tags[1][4] } }, { rule = { class = "5term"}, properties = { tag = tags[1][5] } }, } it works for chromium, firefox and vlc but not for the xterms with the "-name" param. when i check the xterms after they started with xprop i can see: WM_CLASS(STRING) = "5term", "XTerm" i think that sould work, but the xterms are placed on the first workspace/tag.

    Read the article

  • Autostart desktop applications without session login

    - by derekcentrico
    I understand the idea of startup applications when starting a session (ie How do I start a program automatically when I boot?). However, I'm trying to have desktop applications for multiple users start when the computer reboots/starts. Some apps I'm aiming for are Google Music Manager, remote desktop server for each session, etc. How can I either have multiple user sessions launch on boot to get these apps going -or- have them launch some other way for those users? Right now I have my primary user automatically login to start its session and related apps...

    Read the article

  • How to create (via installer script) a task that will install my bash script so it runs on DE startup?

    - by MountainX
    I've been reading for the last couple hours about Upstart, .xinitrc, .xsessions, rc.local, /etc/init.d/, /etc/xdg/autostart, @reboot in crontab and so many other things that I'm totally confused! Here is my bash script. It should start/run after the desktop environment is started and it should continue to run at all times until logout/shutdown. It should start again on reboot. Any time the DE is running, it should run. #!/bin/bash while true; do if [[ -s ~/.updateNotification.txt ]]; then read MSG < ~/.updateNotification.txt kdialog --title 'The software has been updated' --msgbox "$MSG" cat /dev/null > ~/.updateNotification.txt fi sleep 3600 done exit 0 I know zero about using Upstart, but I understand that Upstart is one way to handle this. I'll consider other approaches but most of the things I've been reading about are too complex for me. Furthermore, I can't figure out which approach will meet my requirements (which I'll detail below). There are two steps in my question: How to automatically start the script above, as described above. How to "install" that Upstart task via a bash script (i.e., my "installer"). I assume (or hope) that step 2 is almost trivial once I understand step 1. I have to support all flavors of Ubuntu desktops. Therefore, the kdialog call above will be replaced. I'm considering easybashgui for this. (Or I could use zenity on gnome DE's.) My requirements are: The setup process (installation) must be done via a bash script. I cannot use the GUI method described in the Ubuntu doc AddingProgramToSessionStartup, for example. I must be able to script/automate the setup (installing) process using bash. Currently, it is as simple as having the bash installer script copy the above script into /home/$USER/.kde/Autostart/ The setup process must be universal across Ubuntu derivatives including Unity and KDE and gnome desktops. The same setup script (installer) should run on Linux Mint, Kubuntu, Xbuntu (basically any flavor of Ubuntu and major derivatives such as Linux Mint). For example, we cannot continue to put a script file in /home/$USER/.kde/Autostart/ because that exists only on KDE. The above script should work for each of the limited flavors we use. Hence our interest in using easybashgui instead of kdialog or zenity. See below. The installed monitoring script should only be started after the desktop is started since it will display a GUI message to the user if the update is found. The monitoring script (above) should run without root privileges, of course. But the installer (bash script) can be run as root. I'm not a real developer or a sysadmin. This is a part time volunteer thing for me, so it needs to be easy/simple. I can write bash scripts and I can program a little, but I know nothing about Upstart or systemd, for example. And, unfortunately, my job doesn't give me time to become an expert on init systems or much of anything else related to development and sysadmin. So I have to stick with simple solutions. The easybashgui version of the script might look like this: #!/bin/bash source easybashgui while true; do if [[ -s ~/.updateNotification.txt ]]; then read MSG < ~/.updateNotification.txt message "$MSG" cat /dev/null > ~/.updateNotification.txt fi sleep 3600 done exit 0

    Read the article

  • Apache doesn't autostart because vpn isn't up yet.

    - by Col. Shrapnel
    I have a FreeBSD8 server, and VPN connection to my ISP. I use mpd5 and it works fine. A have an Apache server whch works fine, if I start it manually, after VPN is get up. But when I add it to rc.conf autostart, it fail to start, saying (49) can't assign requested address: make_sock could not bind to address I suppose it's because VPN isn't up yet and no IP address assigned to the interface which i set in the Listen directive in the httpd.conf. If i set Listen to the existing 127.0.0.1, it fail to serve wan requests. Is there a solution, either to delay apache autostart or configure it some different?

    Read the article

  • Why won't this application start when I log in?

    - by George Edison
    I have a file in ~/.config/autostart/ that looks like this: [Desktop Entry] Type=Application Exec=python ~/Documents/StackApplet/stackapplet.py Icon=/usr/share/pixmaps/stackapplet.png Terminal=false Comment=a panel indicator for monitoring StackExchange sites Name=StackApplet Categories=Utility; Unfortunately, it isn't working - the application is not starting when I log in. If I open a terminal and copy-and-paste the command listed in Exec above, then the application runs just fine. What am I doing wrong?

    Read the article

  • Disable shift override for autostart programs per user

    - by Jens
    When starting up windows, one can normally disable all programs in the autostart folder by pressing and holding the SHIFT key. This behavior can be disabled by creating the key ignoreShiftOverride with DWORD setting of 1 in the registry key HKEY_LOCAL_MACHINE\ Software\ Microsoft\ Windows NT\ CurrentVersion\ Winlogon. I'd like to be able to configure this setting for each individual user. How can this be done?

    Read the article

  • Windows service running under network credentials doesn't autostart

    - by David Alpert
    I have a Subversion Server running as a resident service on a Windows XP Pro machine. That service needs to access a secure network fileshare, so I used the Services-Properties-Log On tab to tell the service to run as a user who has access to the target fileshare. That works out fine until the machine restarts, when the service fails to autostart. I am able to start it manually by logging in, going back to that Services-Properties-Log On tab and reconfiming the explicit credentials. Do I have to manually start this service under alternate credentials every time the machine reboots? Is there something else I can do to make sure that my Subversion server service autostarts with proper access to authenticate against this network share?

    Read the article

  • Windows XP autostart process as administrator

    - by Zulakis
    I am looking for a way with which i can autostart a certain program on logon of a user with user-rights with administrator-rights. I already tried using task scheduler but it didn't work out because you got to enter a username with format machine\user and our pxe-image-deployment-system automatically patches the machine names so the entered domain\user stopped working. UPDATE: the runas.exe command does not seem appropiate for this task, too. If using /user:machinename\Administrator /savcred it is invalid after imaging. What one user suggested was using .\Administrator or localhost\Administrator but both didn't work on my XP SP3 machines.

    Read the article

  • How to autostart service in ANY linux?

    - by user329115
    I need to install the dumbest possible service (a binary) and have it reliably run as the current user at boot (or login, whatever) at as many platforms as possible (of the aging point-of-sale type). The app monitors another archives generated by another app in the user-session. Startup alternatives considered: init.d @reboot in crontab a .desktop file in ~/.config/autostart a myriad of other solutions including .profile and .bashrc All of the above break down at some point. The problems stem from not wanting to run as root (I want the files generated to be user-accessible), and not having a way to reliably get the current user name in sudo on all platforms. Ideally not even sudo can be assumed available. Hey, I just want to run something on boot and I have "root" power to do so. Windows get the job done easily enough. This isn't rocket science, is it?

    Read the article

  • How to set up a (relatively) secure kiosk on Natty?

    - by Tim
    I'm trying to get my application to be the only thing a user sees when the machine is powered on - like a kiosk, but a little more secure. Ideally, what I'd like to happen is this: At machine power-on, the user sees the Ubuntu splash image, then my app. While the app is running, the user can't get back to the desktop or a text login prompt via any keyboard shortcut. This is the (relatively) secure bit. When the user exits the app, the user sees a shutdown image, then the machine powers off. In particular, I'd like to configure things so that the user never sees the Gnome desktop on startup or shutdown. At the moment, I've configured a default user to be logged on automatically, with an autostart item which starts my app, but after the Ubuntu startup screen the user sees the Gnome desktop briefly before my app is started. When the app is exited, the user is taken back to the Gnome desktop and has to shut the machine down manually. Also, because of time constraints, I can't really start over with a different window manager. Is there an easy way to configure all of this?

    Read the article

  • Xmonad Xsession

    - by AntLord
    My user level: noob-ish, so please bear with me I'm running 12.04 LTS. I have installed and, to some extent, configured xmonad 0.10 The "automagically" created xsession for it works fine as it is, but when I login it won't run a startup script I've created and "call from" /usr/share/xsessions/xmonad.desktop, if that's right. I've read pretty much all I could find about .xinitrc and .xsession, I tried that and it somehow messed up the other "sessions", if I'm explaining myself correctly. Had to $unity --reset to have the "main session" working again. Anyway, my question is, how do I autostart xmobar and set a desktop background after login into xmonad's default Xsession? I tried this script, start-xmonad: #!/bin/bash # #I only used one of the following each time I tried, none worked #Also, do I really need the '&'? I know what they're for, but... nitrogen --restore & feh --bg-scale ~/Pictures/picture.png & #Then I want xmobar to start, again do I need the '&'? I know it's for it to run #in the background, but I tried removing the '&' and xmonad still launched xmobar & #Finally, the only thing that seems to work in this script exec xmonad Yes, I made sure I did chomd +x ~/start-xmonad The xmonad.desktop is [Desktop Entry] Name=XMonad Encoding=UTF-8 Comment=Lightweight tiling window manager Exec=/home/myusername/start-xmonad Icon=custom_xmonad_badge.png Type=XSession So, this didn't work, now I'm here. Please help :s thanks

    Read the article

1 2 3 4 5 6 7  | Next Page >