Search Results

Search found 24 results on 1 pages for 'blackscreen'.

Page 1/1 | 1 

• Blackscreen while installing 12.10

  - by Nalelvon

  everytime I try to install ubuntu 12.10 on my laptop i get a blackscreen after clicking on "install ubuntu", "try ubuntu without installation" or "ubuntu live" i tried it with nomodeset, nolapic and acpi=off too but nothing works. Sometimes i even get so a loading screen with nothing but "Ubuntu 12.10" and 4 dots in the middle, after that shortly a blackscreen appears with some text on it and then the complete blackscreen appears. As i tried with "no splash" instead of "quiet splash" it shows me something with graphic and determined in it but it was to fast away in a blackscreen to remember. Has someone any idea what I can do to get this working? Sry for my bad english i'm actually from germany. Sincerely Nalelvon

  Read the article

• Black screen appears when booting new install of Ubuntu 11.10 on my desktop, cannot access Grub menu to fix

  - by izn

  I installed 11.10 on my desktop PC but get a black screen after the BIOS screen when I try to boot it. I was able to run 10.04.04 on my hard drive before installing 11.10 and I am also able to use 11.10 on my usb pendrive and CD ROM. I've tried unplugging all USB devices before booting and also upgrading from 11.10 to 11.10. Holding the shift key from the BIOS screen doesn't allow me to access the GRUB menu to try: Highlight the first entry, press “e” to edit it. Navigate to words “quiet splash”, delete them and type “nomodeset” in their place (without quotes). Press Ctrl + X to continue boot. Once on the desktop, go to System Administration Additional Drivers and activate the recommended drivers. So running 11.10 on my pendrive, I tried editing /etc/default/grub, commenting out the GRUB_HIDDEN_TIMEOUT setting by putting a '#' in front of it to display the grub menu and setting GRUB_TIMEOUT setting to a value greater than or equal to 1 e.g. GRUB_TIMEOUT=10. However, when I run sudo update-grub, I get: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?) I get the same error with update-grub after: sudo mount /dev/sda1 /mnt and after: sudo grub-install --root-directory=/mnt /dev/sda reboot sudo update-grub Other suggestions to fix the update-grub problem: Open synaptic, then purge all the related grub installed packages and reinstall grub-pc then and finally: sudo update-grub Or use Grub Customizer http://ubuntuforums.org/showthread.php?t=1195275 What would be the best way to approach this? I'm concerned about purging "all the related grub installed packages" but if it's true some files are corrupted this would seem necessary. Also, was I executing the correct commands i.e. with mount and grub-install, before running grub-update?

  Read the article

• Black Screen and System Hang - Possibly CPU overheating

  - by Mahesh

  I have this old computer - P4 2.0ghz, 1.2GB RAM and onboard graphics(no external card), 80GBHDD. It has xubuntu installed on it and it regularly hangs when it takes more system resources for say like graphical programs, too many tabs on firefox etc. It just either hangs the system or shows black screen. Tested if it was issue of HD but it wasn't because i have used linux livecd and problem is still the same even if I have removed the HD. I have also tested with USB linux (puppy linux and ubuntu linux on 8gb drives). Tested windows XP as well on this HD and results are the same. Tested another HD on this machine, results are still the same with it. System hangs or goes black screen and requires restart. I thought later it could be thermal heat issue and then applied thermal paste on heatsink but still it fails to work for me. It continues to show symptoms. Another thing which was yet to be tested is changing of CPU fan which was not done because I have not found any fan for old pentium 4 machine in the market. I have to hit online stores (but i am in india and it's hard to find it in online shops which can deliver it to me). So far I don't see this as HD or Monitor or OS issue because I have tested with other HD and results are the same. So it could be either CPU fan or motherboard? What could be possible issue with the hardware?

  Read the article

• Acer makes monitor go to power safe mode unless in safe mode

  - by Babyfriend

  I have an acer aspire x3200 Monitor says no input signal (go to power safe mode) I was only able to use computer in safe mode The computer was on (power safe mode) for two weeks. The monitor is ok with another desktop I tried with a different monitor, same message (monitor goes to power safe mode) Why is this happening and if it's my video card probLem will I be able to replace the video card and solve it? It's currently using GeForce 8200 The NVIDIA® GeForce® 8200 motherboard GPU provides DirectX® 10 and HD movies to everyone. System is Windows Vista™ Thanks

  Read the article

• Black stripe appears to the right of the screen, impossible to get rid of

  - by Gabriele Cirulli

  After clicking the "Auto Config" button on my Acer AL2216w screen a stripe appeared on the right of the screen where the screen doesn't "exist" and I can't seem to take the screen viewport back even by using the OCD setting and moving it to the right. The left part of the screen is also hidden and I'm not able to see what's going on there. The PC is connected to the screen through a DVI adapter and a VGA cable. I also use multiple monitors and this is the second monitor. Anyway this seems not to be a related issue, as this used to happen even when I only had a single monitor. I managed to fix this issue once but it was more than two years ago and I can't remember what I did, and out of all of the things I've tried so far (connecting the screen to another PC and performing auto adjustment, switching the cables, etc.) none worked. Here's how it looks: Can anyone help me fix this?

  Read the article

• Radeon hd 6570 black screen

  - by Sho

  I got some problem with new graphic card. Every time I use AMD Catalyst drivers on Windows or Linux, screen repeatedly goes black. This usually shows u when i open new cards in a browser, resize a window or run a program. Card runs smoothly on basic drivers but this means low resolution. 1940x1080 is native for my monitor so it causes a lot of problems. I've got a 600W Deus G1, so the power is not the problem. Maybe its a silly question, but would going form a vga cable to hdmi help to improve this situation? If not, can it be caused by slow processor or old mainboard? Im getting kinda confused about this whole thing...

  Read the article

• Linux Defualt Startup Display PCI to fix black boot screen

  - by Jonathan

  You heard it all before black screen on boot after perfectly fine install of most linux ubnuntu mint etc distributions (the netbook works fine) It has an Intel N10 integrated graphics chipset. I have actually found that if I plug in an external display then remove it the default screen turns on and my laptop works fine drivers all great - I have tried the screen cycle button fn f7 but doesn't work when no display is plugged in. It also works out all the correct resolutions and no modification of the grub bootloader or creating any xorg configs. So I think my monitor is forcing to a display that doesn't exist. Do you know if there is anyway I can force it to choose a different screen at boot so I can get a login screen? I can use nomodeset on grub but xrandr cant add the damned 1024 600 60 resolution that I need! Ideas guys?

  Read the article

• Dark Windows 7 Screen

  - by user147521

  My Gateway laptop -Windows 7- screen became too dark a few days ago after I finished installing Windows automatic update. I can see nothing unless I use a flashlight. Windows login screen is the only bright screen for few seconds. What should I do to resolve this issue? I checked power-saving/ Power Options settings and rebooting in Safe Mode. I tried to lower the refresh rate but it did not allow me. The laptop adapter type is ATI Radeon Xpress series. I uninstalled and reinstalled the driver. And the driver is up to-date. Any help would be appreciated.

  Read the article

• Windows 8 black screen with mouse pointer after login

  - by Sagar Juneja

  I restarted my system today and after logging in, i could see see nothing but a black screen with mouse pointer. I can start task manager via alt+ctrl+del, Task manager and msconfig show fine but when i try to run 'explorer' nothing happens. In safe mode everything seems fine. I do not have any system restore points and repair options from the DVD show "this option is not available for the selected OS" I've also updated my graphic drivers. Didn't help

  Read the article

• Black Screen After Sleep (Win 8)

  - by Mark

  I have an SSD only, Intel HD Graphics only, Ultrabook running on Windows 8 64-bit and after I turn it back on, after a long sleep of a few hours, the screen remains black even though the power is on (the fan and keyboard backlight are on). I have to force a shut down and switch it back on to use it normally again. Hibernation and hybrid-sleep are turned off. It comes out of sleep of less than an hour just fine. Any advise? Mark

  Read the article

• Windows 7 black screen after boot animation

  - by t_virus

  This is happening with my windows 7 64-bit install frequently. Today i was trying to install an icon pack. There was already a restore point prior to it so i didn't feel like create one. I replaced the following system files in both system32 and sysWOW64 imageres.dll imagesp1.dll zipfldr.dll and shell32.dll After a reboot i see windows boot animation and then a black screen (with no mouse) I let it like that for 10 minutes and the laptop automatically went to sleep mode. I wake it up and see an error box this error "interactive logon failed to initialize" I close it and i'm left with a black screen again, this time with a mouse though. I tried using automatic system repair. It just tells me to remove any extra hardware (i have none attached atm) System restore finishes successfully but doesn't fix the problem. Safe mode doesn't work either. same black screen after boot animation Can someone help me with this? Also, I'll be grateful anyone can upload those default files (listed above) for both system32 and sysWOW64 from a windows 7 64bit install (no service pack)

  Read the article

• Very Dark Windows 7 Screen

  - by user147521

  My Gateway laptop -Windows 7- screen became too dark a few days ago after I finished installing Windows automatic update. I can see nothing unless I use a flashlight. Windows login screen is the only bright screen for few seconds. What should I do to resolve this issue? I checked power-saving/ Power Options settings and rebooting in Safe Mode. I tried to lower the refresh rate but it did not allow me. The laptop adapter type is ATI Radeon Xpress series. I calibrated display color. I uninstalled and reinstalled the adapter. I tried to update the driver but the driver is up to-date. Any help would be appreciated.

  Read the article

• Black screen with thinkpad edge e525, AMD radeon HD before and after installation, plymouth?

  - by carolien

  I have a new thinkpad edge e525 (which should work) and wanted to try ubuntu (first linux experience). With the ubuntu desktop-cd I had a blackscreen before installation, I could fix that with nomodeset. After the installation, when rebooting I got the black screen again. First I see some ubuntu colour with a green busted stripe. I have the same problem with the live boot, also tried mint live, the stripe gets pink. I installed xubuntu 64bit from an alternate cd and I didnt have problems until de reboot after the installation. Same problem, just a black screen with the green stripe than blackscreen. I tried several things: adding nomodeset to the bootmenu, but than I get: No connection to plymouth and it is stuck at checking the battery status. I tried to replace quiet splash with text. Didnt work either. actually one time I saw a blue booting image before that. I managed to get a root command though via the recovery boot. I didnt dare to just remove the plymouth package. Can I just delete plymouth or do I have to deinstall it as described in several ways. (Problem is, right now the notebook doesnt have a internet connection. And I dont know how to manage it with a usb stick?) Or do I have to install the AMD catalyst driver manually? (Again, how can I do that with an usb stick) I also tried this: Ubuntu hits a black screen after boot. Is there any solution without internet? And if I need internet which is the right one? Please explain step by step what I have to write and so on! Thank you! also tried: set gfxpayload=text and: just remove splash and adding vesafb.nonsense=1 to the grub editor, because I couldnt find it anywhere

  Read the article

• xp black screen

  - by ciss

  Hello, sorry for my english, i am from russia. so, my pc based on AMD athlon. In past i move harddrive with xp and insert this HardDrive to another PC (Intel core2duo) I do this because i need a lot of files from my pc to another. So after this i back my harddrive to original pc (amd) And i see blackscreen on win-loading! (additional info - i boot this hard on another pc ... i know this is bad =(

  Read the article

• Unable to get screen signal after purge FGLRX

  - by Boris

  I thought that my ATI driver was not running well so I wanted to re-instal it completely. I did: sudo apt-get remove --purge fglrx* sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon and after a boot I wanted to intal the ATI driver BUT at the boot no more signal to my screen. Since, every time I turn on my PC it gets to purple screen and then screen shuts down ! Note that: Even if the screen is off, PC seems to be running almost well: I m still able to use my network to access data shared with NFS. Using live USB I have no screen problem. I tried to plug my screen on an alternative output but it did not work. I tried CTRL+ALT+F1 while being on purple screen but it does not do anything, screen shut down anyway. I m going to try the SHIFT thing and learn from blackscreen wiki...

  Read the article

• Can't install Ubuntu 13.10 from 12.04 lts

  - by Matt Carle

  I have ubuntu 12.04 lts installed on my hp pavilion and I want to try 13.10. When I try to boot into the livecd, I get the purple ubuntu splash screen, then a blackscreen where some text flashes (to fast to see what it says) then it goes to a black screen and stays there. I know the installation disc is not the problem because I've successfully installed it on a different machine using the same disc. I've been trying to troubleshoot the issue for a while now and no luck. I have a radeon hd 8250 card. I know it's not much to go off of but any help would be greatly appreciated! Thanks!

  Read the article

• APK Assets not loaded on Kindle Fire HD

  - by Bastl

  I have developed an App for the Amazon Kindle Fire HD. While distributing I got a report from amazon that its not running on almost all Kindle devices and a blackscreen is displayed. They send me a logcat log file and I found out that it's not possible to load some assets directly from APK file (accessing via C++ and zlib). Everything is running fine if I start it via Eclipse. Any idea whats going wrong? Thanks!

  Read the article

• [Silverlight] MessageBox Black Page

  - by nCdy

  I do Silverlight MVC project on VWDEE2010 when I do private void button1_Click(object sender, RoutedEventArgs e) { MessageBox.Show("I am a button"); } Message shows on BlackScreen on background and only when I click OK it returnts me to my page. Why black page and what ways to avoid ? Thank you.

  Read the article

• Why won't my graphics work in Ubuntu 12.04 LTS?

  - by user170974

  I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

  Read the article

• iphone problem adding splashscreen

  - by zebra

  hi all, i've a little problem, i've add a default.png in my app and it work. I've modify my file, delete file and reference and upload my new file. On my iphone the image does not appear, only some second of blackscreen and after my app start. In the simulator the splashscreen appear. I've try to delete my app on iphone, make a clean all and rebuild & install but nothing... I've try to make clean all, close xcode, delete default.png to my project directory (sometimes exist, sometimes no), open xcode, add my file and build & install on my iphone but nothing... Any ideas?

  Read the article

• Warning in gdb,while run application in device mode

  - by dragon

  Warning in gdb, while run application in device mode... The warning message is warning: UUID mismatch detected with the loaded library - on disk is: /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.2.sdk/System/Library/PrivateFrameworks/MBX2D.framework/MBX2D =uuid-mismatch-with-loaded-file,file="/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.2.sdk/System/Library/PrivateFrameworks/MBX2D.framework/MBX2D" warning: UUID mismatch detected with the loaded library - on disk is: /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.2.sdk/usr/lib/libxml2.2.dylib =uuid-mismatch-with-loaded-file,file="/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.2.sdk/usr/lib/libxml2.2.dylib" The application not loaded in ipod ? the blackscreen shown for long time ... How can i fix this ? can any one help me? Thanks in advance.....

  Read the article

• Data 'logger' turning off when phone goes to standbymode

  - by Marko Järvenpää

  I'm creating a datalogger which logs the gps data and the sensor data of the phone. I've just a strange problem. If the phone is not touched for few minutes it goes into standby mode (screen goes black), and that causes the logger to stop working. Actually the firewriting in the logger stops working. The GPS resumes fine after coming out of blackscreen, but when I check the log I created it only shows saved points for few minutes. Does anyone have idea what is causing this?

  Read the article

• Host system resets (crashes) when using VMWare or VirtualBox and 64-bit guest systems

  - by sinni800

  I have been trying to install virtual systems on VMWare for a while now and encountered strange behaviour from my PC. The behaviour is as follows: On "automatic" virtualization mode it either outputs a cryptic error message (can MAYBE give later, if I can reproduce) right on startup (before even the BIOS) or it resets the complete HOST system (blackscreen, bios...) If I install a Windows XP on it it works well on "binary translation" mode. If I try installing Linux on it, in "binary translation" mode it crashes 1 or 2 seconds after I hit enter on the GRUB selection screen (after the first page of kernel messages rolled in) Using VirtualBox it crashes right in the BIOS. It gave me a Bluescreen though! 0x00000101: CLOCK_WATCHDOG_TIMEOUT: a clock interrupt was not received on a secondary processor within the allocated time interval NEWS: I tried VirtualBox again and it did not completely crash the computer this time. It gave me a critical error and a log file: http://pastebin.com/yKZSDs91 In conclusion, it will crash instantly if VT-x is activated. If not, it seemingly only crashed if I try to install something with 64 bits. Another update: Yes, it ONLY crashes when the guest is 64 bit! What I tried: Reinstalling Windows (my Windows installation was quite broken so it seemed natural. Didn't work though.) New BIOS What I am certain of: Virtualization extensions are activated in the BIOS What my computer specs are: ASUS P8P67 LE mainboard, newest BIOS/EFI firmware Intel Core i5 2500k Ati Radeon HD 5770 16 GB Corsair 1333mhz DDR3 RAM, 4 X 4 GB

  Read the article

• Update successful notice with pure css and a close button

  - by Crays

  Hi guys, i've seen websites that allow you to say update your profile and when the stuff is done, they'll stay in the same page or redirect you to another and with a fancy notice that says "Update successful. click here to close" with a lowered opacity black background and a box in the middle with the text within. I've got most of the stuff, the lowred opacity black background, the middle box with the text and even the click here to close function. But how i did the "Click here to close" function is by using a link. Let's say after updating the profile, my script redirect me to index.php?update=successful then i use $update = $_GET['update']; if ($update == "successful") { echo '<div id="BlackScreen"><p id="MiddleBox">You\'ve successfully update your status!<br><span class="close"><a class="menu" href="index.php">Click to close. </a></span></div></div>'; } so that the lowered opacity background div will be gone, but is there another way to do this? Any tips please?

  Read the article

1