Search Results

Search found 153 results on 7 pages for 'brendan webster'.

Page 1/7 | 1 2 3 4 5 6 7  | Next Page >

• Brendan Gregg's "Systems Performance: Enterprise and the Cloud"

  - by user12608550

  Long ago, the prerequisite UNIX performance book was Adrian Cockcroft's 1994 classic, Sun Performance and Tuning: Sparc & Solaris, later updated in 1998 as Java and the Internet. As Solaris evolved to include the invaluable DTrace observability features, new essential performance references have been published, such as Solaris Performance and Tools: DTrace and MDB Techniques for Solaris 10 and OpenSolaris (2006)  by McDougal, Mauro, and Gregg, and DTrace: Dynamic Tracing in Oracle Solaris, Mac OS X and FreeBSD (2011), also by Mauro and Gregg. Much has occurred in Solaris Land since those books appeared, notably Oracle's acquisition of Sun Microsystems in 2010 and the demise of the OpenSolaris community. But operating system technologies have continued to improve markedly in recent years, driven by stunning advances in multicore processor architecture, virtualization, and the massive scalability requirements of cloud computing. A new performance reference was needed, and I eagerly waited for something that thoroughly covered modern, distributed computing performance issues from the ground up. Well, there's a new classic now, authored yet again by Brendan Gregg, former Solaris kernel engineer at Sun and now Lead Performance Engineer at Joyent. Systems Performance: Enterprise and the Cloud is a modern, very comprehensive guide to general system performance principles and practices, as well as a highly detailed reference for specific UNIX and Linux observability tools used to examine and diagnose operating system behaviour.  It provides thorough definitions of terms, explains performance diagnostic Best Practices and "Worst Practices" (called "anti-methods"), and covers key observability tools including DTrace, SystemTap, and all the traditional UNIX utilities like vmstat, ps, iostat, and many others. The book focuses on operating system performance principles and expands on these with respect to Linux (Ubuntu, Fedora, and CentOS are cited), and to Solaris and its derivatives [1]; it is not directed at any one OS so it is extremely useful as a broad performance reference. The author goes beyond the intricacies of performance analysis and shows how to interpret and visualize statistical information gathered from the observability tools.  It's often difficult to extract understanding from voluminous rows of text output, and techniques are provided to assist with summarizing, visualizing, and interpreting the performance data. Gregg includes myriad useful references from the system performance literature, including a "Who's Who" of contributors to this great body of diagnostic tools and methods. This outstanding book should be required reading for UNIX and Linux system administrators as well as anyone charged with diagnosing OS performance issues.  Moreover, the book can easily serve as a textbook for a graduate level course in operating systems [2]. [1] Solaris 11, of course, and Joyent's SmartOS (developed from OpenSolaris) [2] Gregg has taught system performance seminars for many years; I have also taught such courses...this book would be perfect for the OS component of an advanced CS curriculum.

  Read the article

• Fronteers 2010 — Brendan Eich announced

  Just like last year, Fronteers, the Dutch association of front-end engineers, is organising a conference, and it looks quite good. For me personally the best part is that I don’t have to do a thing; contrary to the last two years I’m not involved in the organisation at all, and just have to show up and have a good time.We’re especially pleased to be able to announceBrendan Eich,inventor of JavaScript and technical architect for the Mozilla project.Fronteers 2010 will take place on 7 and 8 October...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Trouble launch byobu with custom windows.NAME file

  - by Brendan Piater

  Apologies if the solution is obvious but I'm stumped! I want to launch byobu from within my Gnome 3 desktop environment on 12.04 but it's not working for me as yet. Here's what I have: created a windows list file ~/.byobu/windows.mrb then tried to launch byobu from within the gnome terminal with: $ BYOBU_WINDOWS=mrb byobu But it gives me the default windows list, NOT my windows list. I followed these instructions from the wiki: http://goo.gl/omgl8 Here is a sanitised version of my windows.mrb file: screen -t local bash screen -t name1 ssh xxx@xxx screen -t name2 ssh root@xxx screen -t name3 bash Appreciate the time and effort. Cheers Brendan

  Read the article

• How to optimize this mysql query - explain output included

  - by Sandeepan Nath

  This is the query (a search query basically, based on tags):- select SUM(DISTINCT(ttagrels.id_tag in (2105,2120,2151,2026,2046) )) as key_1_total_matches, td.*, u.* from Tutors_Tag_Relations AS ttagrels Join Tutor_Details AS td ON td.id_tutor = ttagrels.id_tutor JOIN Users as u on u.id_user = td.id_user where (ttagrels.id_tag in (2105,2120,2151,2026,2046)) group by td.id_tutor HAVING key_1_total_matches = 1 And following is the database dump needed to execute this query:- CREATE TABLE IF NOT EXISTS `Users` ( `id_user` int(10) unsigned NOT NULL auto_increment, `id_group` int(11) NOT NULL default '0', PRIMARY KEY (`id_user`), KEY `Users_FKIndex1` (`id_group`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 AUTO_INCREMENT=730 ; INSERT INTO `Users` (`id_user`, `id_group`) VALUES (303, 1); CREATE TABLE IF NOT EXISTS `Tutor_Details` ( `id_tutor` int(10) unsigned NOT NULL auto_increment, `id_user` int(10) NOT NULL default '0', PRIMARY KEY (`id_tutor`), KEY `Users_FKIndex1` (`id_user`), KEY `id_user` (`id_user`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 AUTO_INCREMENT=58 ; INSERT INTO `Tutor_Details` (`id_tutor`, `id_user`) VALUES (26, 303); CREATE TABLE IF NOT EXISTS `Tags` ( `id_tag` int(10) unsigned NOT NULL auto_increment, `tag` varchar(255) default NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`), KEY `tag_4` (`tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 AUTO_INCREMENT=2957 ; INSERT INTO `Tags` (`id_tag`, `tag`) VALUES (2026, 'Brendan.\nIn'), (2046, 'Brendan.'), (2105, 'Brendan'), (2120, 'Brendan''s'), (2151, 'Brendan)'); CREATE TABLE IF NOT EXISTS `Tutors_Tag_Relations` ( `id_tag` int(10) unsigned NOT NULL default '0', `id_tutor` int(10) unsigned default NULL, `tutor_field` varchar(255) default NULL, `cdate` timestamp NOT NULL default CURRENT_TIMESTAMP, `udate` timestamp NULL default NULL, KEY `Tutors_Tag_Relations` (`id_tag`), KEY `id_tutor` (`id_tutor`), KEY `id_tag` (`id_tag`), KEY `id_tutor_2` (`id_tutor`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `Tutors_Tag_Relations` (`id_tag`, `id_tutor`, `tutor_field`, `cdate`, `udate`) VALUES (2105, 26, 'firstname', '2010-06-17 17:08:45', NULL); ALTER TABLE `Tutors_Tag_Relations` ADD CONSTRAINT `Tutors_Tag_Relations_ibfk_2` FOREIGN KEY (`id_tutor`) REFERENCES `Tutor_Details` (`id_tutor`) ON DELETE NO ACTION ON UPDATE NO ACTION, ADD CONSTRAINT `Tutors_Tag_Relations_ibfk_1` FOREIGN KEY (`id_tag`) REFERENCES `Tags` (`id_tag`) ON DELETE NO ACTION ON UPDATE NO ACTION; What the query does? This query actually searches tutors which contain "Brendan"(as their name or biography or something). The id_tags 2105,2120,2151,2026,2046 are nothing but the tags which are LIKE "%Brendan%". My question is :- 1.In the explain of this query, the reference column shows NULL for ttagrels, but there are possible keys (Tutors_Tag_Relations,id_tutor,id_tag,id_tutor_2). So, why is no key being taken. How to make the query take references. Is it possible at all? 2. The other two tables td and u are using references. Any indexing needed in those? I think not. Check the explain query output here http://www.test.examvillage.com/explain.png

  Read the article

• New Book: "Systems Performance: Enterprise and the Cloud"

  - by uwes

  Brendan Gregg, former Solaris kernel engineer at Sun published his new book "Systems Performance: Enterprise and the Cloud" in October. The book is a modern, very comprehensive guide to general system performance principles and practices, as well as a highly detailed reference for specific UNIX and Linux observability tools used to examine and diagnose operating system behaviour. Read a more detailed abstract and review on Harry J Foxwell's Blog entry "Brendan Gregg's "Systems Performance: Enterprise and the Cloud"

  Read the article

• ATI (fglrx) Dual monitor / laptop hot-plugging

  - by Brendan Piater

  I feel like I've gone back 5 years on my desktop today. I'll try not dump to much frustration here... I been running 12.04 since alpha with the ATI open source drivers and the gnome 3 desktop. I been generally very happy with them with only small issues along the way. Now of course it does not support 3D acceleration 100%, so games like my newly purchased Amnesia from the Humble bundle would not play. OK, no worries, the ATI driver is in the repos so let me have a go I thought. With all this testing that's been done with multi-monitor support, what could go wrong...? How I use my computer: It's laptop, with a HD 3670 card in it. I spend about 50% of the time working directly on the laptop (at home) and about 50% of the time working with an additional display connected (at work), multi desktop environment. What happening now: installed drivers things seemed to working, save some small other bugs (not critical) this morning I take my machine and plug the additional monitor into it, and nothing happens... ok fine. open "displays" try configure dual display, won't work open ati config "thing" (cause it is a thing, a crap thing) and set-up monitors there reboot it says (oh ffs, really.... ok) reboot, login and wow, I got a gnome 2 desktop (presume gnome 3 fall back) and no multi-monitor...great. (screenshot: http://ubuntuone.com/5tFe3QNFsTSIGvUSVLsyL7 ) after getting into a situation where I had to Ctrl + Alt + Del to get out of a frozen display, I eventually manage to set-up a single display desktop on the "main" monitor ok.. time to go home... unplug monitor... nothing happens.. oh boy here we go... try displays again, nothing, just hangs the display.. great. crash all the apps and reboot... So it's been a trying day... What I really hope is that someone else has figured out how to avoid this PAIN. Please help with a solution that: allows me run fglrx (so I can run the games I want) allows me to hot-plug a monitor to my laptop and remove it again allows me to change the display so include the hot-plugged monitor (preferable automatically like it did with the open drivers) Next best if that's not possible: switch between laptop only display and monitor only display easily (i.e. not having to reboot/logout/suspened etc) Really appreciate the time of anyone that has a solution. Thanks in advance. Regards Brendan PS: I guess I should file a bug about this too, so some direction as to the best place to file this would be appreciated too.

  Read the article

• SOA Suite 11g Native Format Builder Complex Format Example

  - by bob.webster

  This rather long posting details the steps required to process a grouping of fixed length records using Format Builder.   If it’s 10 pm and you’re feeling beat you might want to leave this until tomorrow.  But if it’s 10 pm and you need to get a Format Builder Complex template done, read on… The goal is to process individual orders from a file using the 11g File Adapter and Format Builder Sample Data =========== 001Square Widget            0245.98 102Triagular Widget         1120.00 403Circular Widget           0099.45 ORD8898302/01/2011 301Hexagon Widget         1150.98 ORD6735502/01/2011 The records are fixed length records representing a number of logical Order records. Each order record consists of a number of item records starting with a 3 digit number, followed by a single Summary Record which starts with the constant ORD. How can this file be processed so that the first poll returns the first order? 001Square Widget            0245.98 102Triagular Widget         1120.00 403Circular Widget           0099.45 ORD8898302/01/2011 And the second poll returns the second order? 301Hexagon Widget           1150.98 ORD6735502/01/2011 Note: if you need more than one order per poll, that’s also possible, see the “Multiple Messages” field in the “File Adapter Step 6 of 9” snapshot further down.   To follow along with this example you will need - Studio Edition Version 11.1.1.4.0    with the   - SOA Extension for JDeveloper 11.1.1.4.0 installed Both can be downloaded from here:  http://www.oracle.com/technetwork/middleware/soasuite/downloads/index.html You will not need a running WebLogic Server domain to complete the steps and Format Builder tests in this article.     Start with a SOA Composite containing a File Adapter The Format Builder is part of the File Adapter so start by creating a new SOA Project and Composite. Here is a quick summary for those not familiar with these steps - Start JDeveloper - From the Main Menu choose File->New - In the New Gallery window that opens Expand the “General” category and Select the Applications node.   Then choose SOA Application from the Items section on the right.  Finally press the OK button. - In Step 1 of the “Create SOA Application wizard” that appears enter an Application Name and an Directory of your     choice,   then press the Next button. - In Step 2 of the “Create SOA Application wizard”, press the Next button leaving all entries as defaulted. - In Step 3 of the “Create SOA Application wizard”, Enter a composite name of your choice and Press the Finish   Button These steps result in a new Application and SOA Project. The SOA Project contains a composite.xml file which is opened and shown below. For our example we have not defined a Mediator or a BPEL process to minimize the steps, but one or the other would eventually be needed to use the File Adapter we are about to create. Drag and drop the File Adapter icon from the Component Pallette onto either the LEFT side of the diagram under “Exposed Services” or the right side under “External References”.  (See the Green Circle in the image below).  Placing the adapter on the left side would indicate the file being processed is inbound to the composite, if the adapter is placed on the right side then the data is outbound to a file.     Note that the same Format Builder definition can be used in both directions.  For example we could use the format with a File Adapter on the left side of the composite to parse fixed data into XML, modify the data in our Composite or BPEL process and then use the same Format Builder definition with a File adapter on the right side of the composite to write the data back out in the same fixed data format When the File Adapter is dropped on the Composite the File Adapter Wizard Appears. Skip Past the first page, Step 1 of 9 by pressing the Next button. In Step 2 enter a service name of your choice as shown below, then press Next   When the Native Format Builder appears, skip the welcome page by pressing next. Also press the Next button to accept the settings on Step 3 of 9 On Step 4, select Read File and press the Next button as shown below.   On Step 5 enter a directory that will contain a file with the input data, then  Press the Next button as shown below. In step 6, enter *.txt or another file format to select input files from the input directory mentioned in step 5. ALSO check the “Files contain Multiple Messages” checkbox and set the “Publish Messages in Batches of” field to 1.  The value can be set higher to increase the number of logical order group records returned on each poll of the file adapter.  In other words, it determines the number of Orders that will be sent to each instance of a Mediator or Composite processing using the File Adapter.   Skip Step 7 by pressing the Next button In Step 8 press the Gear Icon on the right side to load the Native Format Builder.       Native Format Builder  appears Before diving into the format, here is an overview of the process. Approach - Bottom up Assuming an Order is a grouping of item records and a summary record…. - Define a separate  Complex Type for each Record Type found in the group.    (One for itemRecord and one for summaryRecord) - Define a Complex Type to contain the Group of Record types defined above   (LogicalOrderRecord) - Define a top level element to represent an order.  (order)   The order element will be of type LogicalOrderRecord   Defining the Format In Step 1 select   “Create new”  and  “Complex Type” and “Next”   In Step two browse to and select a file containing the test data shown at the start of this article. A link is provided at the end of this article to download a file containing the test data. Press the Next button     In Step 3 Complex types must be define for each type of input record. Select the Root-Element and Click on the Add Complex Type icon This creates a new empty complex type definition shown below. The fastest way to create the definition is to highlight the first line of the Sample File data and drag the line onto the  <new_complex_type> Format Builder introspects the data and provides a grid to define additional fields. Change the “Complex Type Name” to  “itemRecord” Then click on the ruler to indicate the position of fixed columns.  Drag the red triangle icons to the exact columns if necessary. Double click on an existing red triangle to remove an unwanted entry. In the case below fields are define in columns 0-3, 4-28, 29-eol When the field definitions are correct, press the “Generate Fields” button. Field entries named C1, C2 and C3 will be created as shown below. Click on the field names and rename them from C1->itemNum, C2->itemDesc and C3->itemCost  When all the fields are correctly defined press OK to save the complex type.        Next, the process is repeated to define a Complex Type for the SummaryRecord. Select the Root-Element in the schema tree and press the new complex type icon Then highlight and drag the Summary Record from the sample data onto the <new_complex_type>   Change the complex type name to “summaryRecord” Mark the fixed fields for Order Number and Order Date. Press the Generate Fields button and rename C1 and C2 to itemNum and orderDate respectively.   The last complex type to be defined is a type to hold the group of items and the summary record. Select the Root-Element in the schema tree and click the new complex type icon Select the “<new_complex_type>” entry and click the pencil icon   On the Complex Type Details page change the name and type of each input field. Change line 1 to be named item and set the Type  to “itemRecord” Change line 2 to be named summary and set the Type to “summaryRecord” We also need to indicate that itemRecords repeat in the input file. Click the pencil icon at the right side of the item line. On the Edit Details page change the “Max Occurs” entry from 1 to UNBOUNDED. We also need to indicate how to identify an itemRecord.  Since each item record has “.” in column 32 we can use this fact to differentiate an item record from a summary record. Change the “Look Ahead” field to value 32 and enter a period in the “Look For” field Press the OK button to save entry.     Finally, its time to create a top level element to represent an order. Select the “Root-Element” in the schema tree and press the New element icon Click on the <new_element> and press the pencil icon.   Set the Element Name to “order” and change the Data Type to “logicalOrderRecord” Press the OK button to save the element definition.   The final definition should match the screenshot below. Press the Next Button to view the definition source.     Press the Test Button to test the definition   Press the Green Triangle Icon to run the test.   And we are presented with an unwelcome error. The error states that the processor ran out of data while working through the definition. The processor was unable to differentiate between itemRecords and summaryRecords and therefore treated the entire file as a list of itemRecords.  At end of file, the “summary” portion of the logicalOrderRecord remained unprocessed but mandatory.   This root cause of this error is the loss of our “lookAhead” definition used to identify itemRecords. This appears to be a bug in the  Native Format Builder 11.1.1.4.0 Luckily, a simple workaround exists. Press the Cancel button and return to the “Step 4 of 4” Window. Manually add    nxsd:lookAhead="32" nxsd:lookFor="."   attributes after the maxOccurs attribute of the item element. as shown in the highlighted text below.   When the lookAhead and lookFor attributes have been added Press the Test button and on the Test page press the Green Triangle. The test is now successful, the first order in the file is returned by the File Adapter.     Below is a complete listing of the Result XML from the right column of the screen above   Try running it The downloaded input test file and completed schema file can be used for testing without following all the Native Format Builder steps in this example. Use the following link to download a file containing the sample data. Download Sample Input Data This is the best approach rather than cutting and pasting the input data at the top of the article.  Since the data is fixed length it’s very important to watch out for trailing spaces in the data and to ensure an eol character at the end of every line. The download file is correctly formatted. The final schema definition can be downloaded at the following link Download Completed Schema Definition   - Save the inputData.txt file to a known location like the xsd folder in your project. - Save the inputData_6.xsd file to the xsd folder in your project. - At step 1 in the Native Format Builder wizard  (as shown above) check the “Edit existing” radio button,    then browse and select the inputData_6.xsd file - At step 2 of the Format Builder configuration Wizard (as shown above) supply the path and filename for    the inputData.txt file. - You can then proceed to the test page and run a test. - Remember the wizard bug will drop the lookAhead and lookFor attributes,  you will need to manually add   nxsd:lookAhead="32" nxsd:lookFor="."    after the maxOccurs attribute of the item element in the   LogicalOrderRecord Complex Type.  (as shown above)   Good Luck with your Format Project

  Read the article

• Scripting a sophisticated RTS AI with Lua

  - by T. Webster

  I'm planning to develop a somewhat sophisticated RTS AI (eg see BWAPI). have experience programming, but none in game development, so it seems easiest to start by scripting the AI of an existing game I've played, Warhammer 40k: Dawn of War (2004). As far as I can tell, the game AI is scripted with some variant of Lua (by the file extension .ai or .scar). The online documentation is sparse and the community isn't active anymore. I'd like to get some idea of the difficulty of this undertaking. Is it practical with a scripting language like Lua to develop a RTS AI that includes FSMs, decision trees, case-based reasoning, and transposition tables? If someone has any experience scripting Dawn of War, that would also help.

  Read the article

• learning on the clock

  - by T. Webster

  Some might argue this question is too general, but because keeping up seems especially relevant to programming, is anyone's experience that: do employers expect you to stay current? what is the "industry standard" of expected time a programmer should spend keeping up-to-date? is it generally acceptable that a programmer can spend some time during working hrs on meeting the expectation to keep skills current? If not, how do most programmers find the time? -

  Read the article

• Can I use GLFW and GLEW together in the same code

  - by Brendan Webster

  I use the g++ compiler, which could be causing the main problem, but I'm using GLFW for window and input management, and I am using GLEW so that I can use OpenGL 3.x functionality. I loaded in models and then tried to make Vertex and Index buffers for the data, but it turned out that I kept getting segmentation faults in the program. I finally figured out that GLEW just wasn't working with GLFW included. Do they not work together? Also I've done the context creation through GLFW so that may be another factor in the problem.

  Read the article

• C++ problem with assimp 3D model loader

  - by Brendan Webster

  In my game I have model loading functions for Assimp model loading library. I can load the model and render it, but the model displays incorrectly. The models load in as if they were using a seperate projection matrix. I have looked over my code over and over again, but I probably keep on missing the obvious reason why this is happening. Here is an image of my game: It's simply a 6 sided cube, but it's off big time! Here are my code snippets for rendering the cube to the screen: void C_MediaLoader::display(void) { float tmp; glTranslatef(0,0,0); // rotate it around the y axis glRotatef(angle,0.f,0.f,1.f); glColor4f(1,1,1,1); // scale the whole asset to fit into our view frustum tmp = scene_max.x-scene_min.x; tmp = aisgl_max(scene_max.y - scene_min.y,tmp); tmp = aisgl_max(scene_max.z - scene_min.z,tmp); tmp = (1.f / tmp); glScalef(tmp/5, tmp/5, tmp/5); // center the model //glTranslatef( -scene_center.x, -scene_center.y, -scene_center.z ); // if the display list has not been made yet, create a new one and // fill it with scene contents if(scene_list == 0) { scene_list = glGenLists(1); glNewList(scene_list, GL_COMPILE); // now begin at the root node of the imported data and traverse // the scenegraph by multiplying subsequent local transforms // together on GL's matrix stack. recursive_render(scene, scene->mRootNode); glEndList(); } glCallList(scene_list); } void C_MediaLoader::recursive_render (const struct aiScene *sc, const struct aiNode* nd) { unsigned int i; unsigned int n = 0, t; struct aiMatrix4x4 m = nd->mTransformation; // update transform aiTransposeMatrix4(&m); glPushMatrix(); glMultMatrixf((float*)&m); // draw all meshes assigned to this node for (; n < nd->mNumMeshes; ++n) { const struct aiMesh* mesh = scene->mMeshes[nd->mMeshes[n]]; apply_material(sc->mMaterials[mesh->mMaterialIndex]); if(mesh->mNormals == NULL) { glDisable(GL_LIGHTING); } else { glEnable(GL_LIGHTING); } for (t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; GLenum face_mode; switch(face->mNumIndices) { case 1: face_mode = GL_POINTS; break; case 2: face_mode = GL_LINES; break; case 3: face_mode = GL_TRIANGLES; break; default: face_mode = GL_POLYGON; break; } glBegin(face_mode); for(i = 0; i < face->mNumIndices; i++) { int index = face->mIndices[i]; if(mesh->mColors[0] != NULL) glColor4fv((GLfloat*)&mesh->mColors[0][index]); if(mesh->mNormals != NULL) glNormal3fv(&mesh->mNormals[index].x); glVertex3fv(&mesh->mVertices[index].x); } glEnd(); } } // draw all children for (n = 0; n < nd->mNumChildren; ++n) { recursive_render(sc, nd->mChildren[n]); } glPopMatrix(); } Sorry there is so much code to look through, but I really cannot find the problem, and I would love to have help.

  Read the article

• I can't figure out how to animate my loaded model with Assimp

  - by Brendan Webster

  I have loaded in a model to my C++ OpenGL game. It is a COLLADA file type that I have loaded, and I setup an animation under blender for the file. The problem is I don't know how to animate the model. The Assimp documentation didn't really help me out. Their source code didn't use animations, and I can't seem to find anywhere online that someone explains how to animate your loaded model... I'm sorta wondering if someone could link me to a helpful website, or maybe just help me out, so that maybe I will understand how to do animations with assimp.

  Read the article

• OpenGL not rendering my images to the screen

  - by Brendan Webster

  for some reason my game isn't showing the image I am rendering to the screen. My engine is state based, and at the beginning I set the logo, but it isn't showing on the screen. Here is my method of doing so first I create one image and assign some values to it's preset values. //create one image instance for the logo background O_File.v_Create_Images(1); //set the atributes of the background //first Image O_File.sImage[0].nImageDepth = -30.0f; O_File.sImage[0].sImageLocation = "image.bmp"; //load the images int O_File.v_Load_Images(); Then I load them with DevIL void C_File_Manager::v_Load_Images() { ilGenImages(1, &image); ilBindImage(image); for(int i = 0;i < sImage.size();i++) { success = ilLoadImage(sImage[i].sImageLocation.c_str()); if (success) { success = ilConvertImage(IL_RGBA, IL_UNSIGNED_BYTE); glGenTextures(1, &image); glBindTexture(GL_TEXTURE_2D, image); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexImage2D(GL_TEXTURE_2D, 0, 4, ilGetInteger(IL_IMAGE_WIDTH), ilGetInteger(IL_IMAGE_HEIGHT), 0, ilGetInteger(IL_IMAGE_FORMAT), GL_UNSIGNED_BYTE, ilGetData()); //asign values to the width and height of the image if they are already not assigned if(sImage[i].nImageHeight == 0) sImage[i].nImageHeight = ilGetInteger(IL_IMAGE_HEIGHT); if(sImage[i].nImageWidth == 0) sImage[i].nImageWidth = ilGetInteger(IL_IMAGE_WIDTH); std::cout << sImage[i].nImageHeight << std::endl; const std::string word = sImage[i].sImageLocation.c_str(); std::cout << sImage[i].sImageLocation.c_str() << std::endl; ilLoadImage(word.c_str()); ilDeleteImages(1, &image); } } } and then I apply them to the screen void C_File_Manager::v_Apply_Images() { glMatrixMode(GL_MODELVIEW); glLoadIdentity(); for(int i = 0;i < sImage.size();i++) { //move the image to where it should be on the screen; glTranslatef(sImage[i].nImageX,sImage[i].nImageY,sImage[i].nImageDepth); //rotate image around the 3 axes glRotatef(sImage[i].fImageAngleX,1,0,0); glRotatef(sImage[i].fImageAngleY,0,1,0); glRotatef(sImage[i].fImageAngleZ,0,0,1); //scale the image glScalef(1,1,1); //center the image glTranslatef((sImage[i].nImageWidth/2),(sImage[i].nImageHeight/2),0); //draw the box that will encase the loaded image glBegin(GL_QUADS); //change the color of the loaded image; glColor4f(1,1,1,1); //top left corner of image glNormal3f(0.0,0,0.0); glTexCoord2f (1.0, 0.0); glVertex3f(0,0,sImage[i].nImageDepth); //top right corner of image glNormal3f(1.0,0,0.0); glTexCoord2f (1.0, 1.0); glVertex3f(0,sImage[i].nImageHeight,sImage[i].nImageDepth); //bottom right corner of image glNormal3f(-1.0,0,0.0); glTexCoord2f (0.0, 1.0); glVertex3f(sImage[i].nImageWidth,sImage[i].nImageHeight,sImage[i].nImageDepth); //bottom left corner of image glNormal3f(-1.0,0,0.0); glTexCoord2f(0.0, 0.0); glVertex3f(sImage[i].nImageWidth,0,sImage[i].nImageDepth); glEnd(); } } when I debug there is no errors at all, but yet the images don't show up on the screen, I have positioned the camera at (0,0,-1) and that is where the images should show up. the clipping plane is set 1 to 1000. There is probably some random problem with the code, but I just can't catch it.

  Read the article

• Problem with Assimp 3D model loader

  - by Brendan Webster

  In my game I have model loading functions for Assimp model loading library. I can load the model and render it, but the model displays incorrectly. The models load in as if they were using a seperate projection matrix. I have looked over my code over and over again, but I probably keep on missing the obvious reason why this is happening. Here is an image of my game: It's simply a 6 sided cube, but it's off big time! Here are my code snippets for rendering the cube to the screen: void C_MediaLoader::display(void) { float tmp; glTranslatef(0,0,0); // rotate it around the y axis glRotatef(angle,0.f,0.f,1.f); glColor4f(1,1,1,1); // scale the whole asset to fit into our view frustum tmp = scene_max.x-scene_min.x; tmp = aisgl_max(scene_max.y - scene_min.y,tmp); tmp = aisgl_max(scene_max.z - scene_min.z,tmp); tmp = (1.f / tmp); glScalef(tmp/5, tmp/5, tmp/5); // center the model //glTranslatef( -scene_center.x, -scene_center.y, -scene_center.z ); // if the display list has not been made yet, create a new one and // fill it with scene contents if(scene_list == 0) { scene_list = glGenLists(1); glNewList(scene_list, GL_COMPILE); // now begin at the root node of the imported data and traverse // the scenegraph by multiplying subsequent local transforms // together on GL's matrix stack. recursive_render(scene, scene->mRootNode); glEndList(); } glCallList(scene_list); } void C_MediaLoader::recursive_render (const struct aiScene *sc, const struct aiNode* nd) { unsigned int i; unsigned int n = 0, t; struct aiMatrix4x4 m = nd->mTransformation; // update transform aiTransposeMatrix4(&m); glPushMatrix(); glMultMatrixf((float*)&m); // draw all meshes assigned to this node for (; n < nd->mNumMeshes; ++n) { const struct aiMesh* mesh = scene->mMeshes[nd->mMeshes[n]]; apply_material(sc->mMaterials[mesh->mMaterialIndex]); if(mesh->mNormals == NULL) { glDisable(GL_LIGHTING); } else { glEnable(GL_LIGHTING); } for (t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; GLenum face_mode; switch(face->mNumIndices) { case 1: face_mode = GL_POINTS; break; case 2: face_mode = GL_LINES; break; case 3: face_mode = GL_TRIANGLES; break; default: face_mode = GL_POLYGON; break; } glBegin(face_mode); for(i = 0; i < face->mNumIndices; i++) { int index = face->mIndices[i]; if(mesh->mColors[0] != NULL) glColor4fv((GLfloat*)&mesh->mColors[0][index]); if(mesh->mNormals != NULL) glNormal3fv(&mesh->mNormals[index].x); glVertex3fv(&mesh->mVertices[index].x); } glEnd(); } } // draw all children for (n = 0; n < nd->mNumChildren; ++n) { recursive_render(sc, nd->mChildren[n]); } glPopMatrix(); } Sorry there is so much code to look through, but I really cannot find the problem, and I would love to have help.

  Read the article

• I'm using OpenAL, trying to load a .ogg file and having .dll troubles

  - by Brendan Webster

  I'm using OpenAL for my game's music, and it loads .wav files by default, but to load in Ogg files I had to download and setup a few .dlls and lib files. I have fixed all errors with dlls except for this: I need vorbis.dll, and it says it's missing vorbis_window. I just can't find the dll anywhere online that includes the vorbis_window, anyone have suggestions on how I should fix this problem with my dll?

  Read the article

• Process Oracle OER Events using a simple Web Service

  - by Bob Webster

  This post provides an example of a simple web service that processes Oracle Enterprise Repository (OER) Events. The service receives events from OER and utilizes the OER REX API to implement simple OER automations for selected event types. The web service example implements the following: When a new Asset is Submitted to OER: The Asset is automatically Accepted by a defined user. When an Asset is Accepted: The Asset is automatically assigned  to a defined user for review. If the accepted asset is of type Service The Version meta data attribute is set based on the version id contained in the suffix of the Service Namespace.      When an Asset is Registered: If the registered Asset is of type Service The related Assets ( Interface and Endpoint are also automatically registered. The sample web service is not intended to replace the out of the Box OER BPM Based workflows, but the service can be utilized in cases where only simple automation is required and the developer has a Java skill set. The service is a lightweight web application that can be easily deployed to the same server as OER or on a different server. Read the complete post here

  Read the article

• Create an Asynchronous JAX-WS Web Service and call it from Oracle BPEL 11g

  - by Bob Webster

  This posting is the result of a simple requirement to take an existing JAX-WS Web service,convert it to be asynchronous and call it from Oracle BPEL 11g It turned out that this is not a trivial task... BPEL has some very specific expectations about the WSDL for an asynchronous process. One approach is to develop the service starting from a WSDL document that meets BPEL's requirements. This is possible but requires considerable WSDL authoring skills. The other approach is to modify the WSDL generated by Web Service Annotations in Java code (Bottom up development) and instruct JAX-WS to use that WSDL instead of dynamically generating one from annotations. This is the approach taken in this article. This posting details how to: Modify a JAX-WS Web Service developed using a "Bottom up " approach to have an asynchronous method and callback. Call the Asynchronous Service from Oracle BPEL 11g. Read the full posting here.

  Read the article

• Are developers expected to have skills of business analysts?

  - by T. Webster

  Our business analyst has left the team. We are now expected to do the work which was previously done by the business analyst, and the management thinks that a task which is done in three months by a business analyst can be done in one month by a developer. My experience is in programming only, and I'm not familiar to the business intelligence tools. To me this seems like maybe an unfair comparison or expectation, and might even trivialize the role of a business analyst. Has anyone else encountered this situation? How to deal with it?

  Read the article

• How do I apply a computer science degree to web development?

  - by T. Webster

  I'm a web programmer, but I haven't found many opportunities to take advantage of a formal education in computer science. Maybe I'm not looking in the right places, but it seems to me like most of the web jobs I come across are CRUD, web forms, and data grids. For these jobs a formal CS background doesn't seem necessary, and you could do fine with O'Reilly cookbooks in jQuery, CSS 3, PHP, SQL, or ASP.NET MVC. What kinds of web developer jobs exist that really let you apply your computer science background? Do I need to branch out into other areas of programming to take full advantage of my degree?

  Read the article

• JDeveloper does not recognize existing subversion working directory

  - by Bob Webster

  Just a quick note about an issue where JDeveloper no longer recognized an existing subversion working directory. Symptom:  JDeveloper Versioning menu offers to Version an Application that is already versioned in svn. Cause: The repository url contained in the hidden .svn folders of the working directory is no longer valid. Solution: Determine the correct url for the Subversion repository and update the .svn working directory.Fix the url contained in the svn folders of the working directory using the svn switch command. Example:           In a shell change directory to the Application folder.           Run the svn info command to confirm the current settings.                $ svn info                   Path: .                   URL: http://192.168.1.128/repos/jdeveloperrepo/AsyncExamples/BPELCallAsync/trunk                   Repository Root: http://192.168.1.128/repos/jdeveloperrepo                   Repository UUID: 3dc5eb88-3001-0010-8d6e-fd6f73825647                   Revision: 145                   Node Kind: directory                   Schedule: normal                   Last Changed Rev: 145                   Last Changed Date: 2012-06-07 07:15:56 -0700 (Thu, 07 Jun 2012)            In this case, the IP address in the repository URL is incorrect,           the svn server is located at 192.168.56.1           Note: The IP Address currently set is displayed after the Project Name in the            Application Navigator.  See the screen snapshot above.            Run the svn switch command with the --relocate option            Provide as much of the urls as necessary to correctly rewrite the url from current to new.            For example,            to change the repository server address from 192.168.1.128   to   192.168.56.1                     $  svn switch --relocate  http://192.168.1.128   http://192.168.56.1  .                               (Note the trailing period in the above command)           When the url is correct, JDeveloper should recognize the Subversion Working Directory.

  Read the article

• Extend OER to enable deletion of unsubmitted assets

  - by Bob Webster

  This post provides a small extension to OER 11g that allows users without full Registrar permissions to delete their own unsubmitted assets. When the extension is installed in OER, a delete button conditionally appears on the Asset Details page of the OER Web App. The button is only visible if the selected Asset is in the 'Unsubmitted' state and the asset was created by the current user. Read the full post here 

  Read the article

• how much is a graduate Information Technology (IT) degree worth?

  - by T. Webster

  I have a bachelor's degree in IS/MIS not CS, and a few years of software development experience now. I want to pursue some sort of graduate education that will give me more career options. I was wondering if it's worth pursuing a graduate degree in Information Technology (not CS). -How much is a master's degree in Information Technology worth? By this I mean how marketable does it make you, and how valuable is the education itself. -How does its worth compare to a master's in CS? -What types of employers are looking for the IT master's degree vs. a Computer Science master's degree? -What's the most valuable thing an Information Technology degree can give, that someone wouldn't have without the degree? Thanks.

  Read the article

• ESXi 4.0 Guests Locking up

  - by Brendan Sherwin

  I installed ESXi 4.0 on an HP Proliant g5 with a 64bit Xeon processor and took advantage of the free license as I work for a public school. I created two instances of server 2003 from scratch, one to be the DC, DHCP, the other to be a file server and DNS/DHCP backup. I had both guests up and running fine, setup my user accounts, transferred the data, etc etc. Once I joined a client machine to the domain, I would find that both of my Windows guests would lock up. Sometimes it would be for five or so minutes, once it was overnight. The "locked up" state means that as far I could tell, all services were stopped; dhcp no longer handed out IP's, DNS stopped working, I couldn't RDP into the server. The ESXi host, my HP server, was still running fine. VSphere was working, and I could look at the performance of the individual guests.I would try Powering off the hosts from inside VSPhere, and the hosts would start powering off, but get stuck at 95%, and stay that way, sometimes only for 10 minutes, others for hours. Several times I had to restart ESXi from it's console in order to restart my machines. Now, can anyone tell me what is happening, and how I can fix it, or take steps to prevent it? I hired a consultant to come take a look at it, someone who's experience and knowledge I trust, and he told me he had never seen anything like this ever before. He spoke to a friend of his who is VM certified, and he also said he had never heard of this issue. Thanks for your replies, and I'll do my best to respond ASAP. Currently, the server is powered off, and I've reinstituted my nine year old Server 2000 boxes, and I'm considering installing ESXi 3.5. Does anyone know a host created in 4.0 will work in 3.5? I'd really like to avoid having to rebuild those accounts! I know 4.0 works on this server, as I have another server in another school with the same exact hardware running 4.0 fine. Brendan

  Read the article

• How to structure a XML-based order form using ASP.NET

  - by Brendan

  First question here; please help me if I'm doing something wrong. I'm a graphic designer who's trying to teach himself ASP.NET/C#. My server-side background is PHP/WordPress and some ASP Classic, and when I do code I've hand-coded just about everything since I started learning HTML. So, as I've started to learn .NET, my code has been very manual and procedural. I'm now trying to create a really basic order form that pulls from an XML file to populate the form; there's an image, a title, a price, and selectable quantities. If I was making this form as a static HTML file, I'd have each field named manually and so on postback I could query each field to get the values. But I'm trying to do this dynamically so that I can add/remove items from the form and not have to change the code. In terms of displaying the XML, I rolled my own by loading XmlDocument and using XmlNodeList and a bunch of foreach loops to get things displayed. Then, I learned about <asp:XmlDataSource> and <asp:Repeater>, which made displaying the XML simpler by a large margin. However, I've had a really hard time getting the data that's been submitted on postback (it was implied on SO that there are better ways to get data than nested RepeaterItems). So, what I've learned so far is that you can do things a bunch of different ways in .NET. that's why I thought it'd be good to ask for answers regarding the best way to use ASP.NET to display a XML document and dynamically capture the data that's submitted. Any help is appreciated! I'm using Notepad++ to code .NET 2.0.

  Read the article

• Ougoing telnet: Unable to connect to remote host: Connection refused

  - by brendan

  I am trying to telnet from Ubuntu server (running Maverick) on ec2 to another machine I have set up not on ec2 - we'll call it "server-x". The two machines are connected via vpn. I can ping from the ec2 machine to server-x no problem. On another machine also on the vpn but also not on ec2 I can telnet to server-x without issue so it is accepting incoming connections on that port. But when I run telnet from the ubuntu instance to server-x I get : ubuntu@ip-10-111-11-11:~$ telnet 5.1.1.1 9143 Trying 5.1.1.1... telnet: Unable to connect to remote host: Connection refused Other telnets work like this: ubuntu@ip-10-111-11-11:~$ telnet imap.gmail.com 993 Trying 173.194.76.108... Connected to gmail-imap.l.google.com. Escape character is '^]'. I have disabled ufw on the ubuntu machine. Is there anything else that can be blocking this outgoing connection? I tried adding the outgoing port to iptables but I'm not certain I'm doing that right.

  Read the article

1 2 3 4 5 6 7  | Next Page >