Search Results

Search found 67 results on 3 pages for 'buffalo'.

Page 1/3 | 1 2 3  | Next Page >

• Buffalo wireless router

  - by Walter White

  Hi all, I have a Buffalo wireless router and it appears to work fine, for the most part. However, printing out some debug information, I noticed that the Mode is reported as unknown/bug. In the DD-WRT configuration, I have selected AP which should be Master. I was having a problem earlier with my ESSID being a bunch of weird characters. I re-entered it and restarted the router and now the ESSID is correct. I tried re-entering the configuration for the router and it still is reported back as Unknown/bug via iwlist wlan0 scanning. Any ideas? Walter

  Read the article

• HP/Lenovo alternative to Buffalo iSCSI TerraStation?

  - by Robin Day

  I'm looking at virtualising some of our infrastructure in order to allow for more resiliance and future expandability. We have successfully virtualised on single servers with Direct Attached Storage and are now looking for a more future proof solution using a high powered host (or two) and a SAN (or two). I'm thinking that the host machine will probably be an HP ProLiant DL360 G7 (all of our exisiting infrastructure is HP). Unfortunately, I am new to the world of SANs. From what I can see, the Buffalo Terrastation III is all I would need in order to setup an iSCSI SAN for VMWare to use. However, I'm a little reticent to go that way as it's a bit too "entry level" for my liking. In particular I would be very keen for more redundancy, power, networking, etc. I'm also very aware that you "get what you pay for". Therefore, can anyone reccommend equivalents from the big boys? HP/Lenovo? I have searched high and low on the HP site and seen many options but am struggling to work out if it is all the hardware I will need. Some options appear to need separate controllers from disk enclosures, etc.

  Read the article

• HP/IBM alternative to Buffalo iSCSI TerraStation?

  - by Robin Day

  I'm looking at virtualising some of our infrastructure in order to allow for more resiliance and future expandability. We have successfully virtualised on single servers with Direct Attached Storage and are now looking for a more future proof solution using a high powered host (or two) and a SAN (or two). I'm thinking that the host machine will probably be an HP ProLiant DL360 G7 (all of our exisiting infrastructure is HP). Unfortunately, I am new to the world of SANs. From what I can see, the Buffalo Terrastation III is all I would need in order to setup an iSCSI SAN for VMWare to use. However, I'm a little reticent to go that way as it's a bit too "entry level" for my liking. In particular I would be very keen for more redundancy, power, networking, etc. I'm also very aware that you "get what you pay for". Therefore, can anyone reccommend equivalents from the big boys? HP/IBM? I have searched high and low on the HP site and seen many options but am struggling to work out if it is all the hardware I will need. Some options appear to need separate controllers from disk enclosures, etc.

  Read the article

• VPN to Buffalo WHR-HP-G300N produces a Connection Error 807

  - by Darius

  My friend has modem/router from Clear and I have sent him Buffalo router to put it between his Clear device and the Network. I walked him thru establishing VPN in DD-WRT but when I try to VPN I get a VPN Connection Error 807. I am out of ideas how to solve this. Any suggestion? Clear Modem WAN: xx.xx.xx.xx Clearn Modem NAT's to: 192.168.15.XXX Clear Modem DHCP: 192.168.15.2 - 192.168.15.2 (range is limited to that of ONE ip address) Clear Modem DMZ: 192.168.15.2 the LAN of the clear modem is 192.168.15.XXX The DD-WRT IP: 192.168.4.1 Port FWD: 1723 to 192.168.4.1 PPTP server listens on 192.168.4.1 Where is the problem with this setup?

  Read the article

• Using a buffalo wl12-pci-g54s on Debian Linux

  - by Nic Hubbard

  I have a buffalo wl12-pci-g54s wireless card that I want to install in my PC running Debian. I need this so I can move the server to a better location in another room. So, is there an easy way to do this? Some package that I can install and get up and running? Other instructions that I found online have been confusing. I am also using a static IP, so I need to retain that when I make the switch. Thanks!

  Read the article

• LAN->LAN IP translation (for TortoiseSVN + Artifacts + Buffalo router)

  - by Armchair Bronco

  Here's my scenario: I've got a VisualSVN server on my main dev box @ home. I'm also using Visual Studio 2010, TortoiseSVN, VisualSVN client (for source control), and Versioned 'Artifacts' (for bug tracking). (I had to modify the fake URL's below to use only one slash because as a new user, I can't post more than one real URL.) I've got my Buffalo AirStation WHR-HP-G300N router properly configured so my business partner can connect to the SVN server. I have port forwarding enabled for the internet-side IP address (like http:/99.888.77.66:443) which gets forwarded to an internal IP (like 192.168.11.6). This part is working great. The problem I'm having is with the integration piece between TortoiseSVN and my bug tracking system. I need to provide a bugtraq:url property, but I haven't been able to get relative paths to work. So I'm forced to use an absolute URL. On my end, I need to use the name of my server (for example: bugtraq:url = https:/my-server/svn/bla..), but this doesn't work for my partner. He needs to specify the IP address (for example: bugtraq:url = https:/999.888.77.66:443/svn/bla...) Is there a way to configure my router such that the IP address for this parameter gets re-routed/re-mapped to "https://my-server" if the request originates from the LAN itself? My router's software supports LAN-Internet and Internet-LAN, but I don't see LAN-LAN.

  Read the article

• Buffalo TeraStation Firmware Upgrade

  - by jason

  Hi All, I was given a TeraStation HS-DH0.0TGL/R5 It came to me working with 4x250gb. I added 4 x 1TB, TFTP booted and data was copied. How do I load firmware and software now to get it running? I was going based upon this article: http://forums.buffalotech.com/t5/Storage/FAQ-3-of-3-TFTP-boot-procedure-please-read-this/m-p/11015 I downloaded TFTP Boot Recovery HS-DHTGL-R5 2.13.exe and Terastation_112-104.zip Advice is appreciated.

  Read the article

• Backup to disk, encrypted, without any installed local software

  - by user30064

  Hi, Ok, this is a tough one, and it might not even be possible, but no harm in asking I guess. I have a Buffalo Terastation file server that I use for network attached storage. After a couple of phone calls to customer services I realised that there is no way to backup to disk encrypted. In effect, I would be carrying unencrypted company data off-site daily, which is obviously unacceptable. I had a go at TrueCrypt, EncFS, and a few others, and as far as I could see all of them required that you install some software on the machine that is to use the file system, which makes sense. Unfortunately the firmware on the Terastation is closed and I cannot install any software (and I can't build from source either, since Buffalo didn't include a compiler). Are there any ways to copy files to disk, where as soon as they are written to the disk they are transparently encrypted, without having to install additional software? I'm not sure it matters too much, but the Terastation firmware is Linux based, although as I mentioned, closed. Many thanks, Andreas

  Read the article

• replacing buffalo lonkstations with FreeNAS, overall backup strategy, am I on the right path?

  - by Shreko

  We've been using 2 Buffalo LinkStations of 320Gb each for shared directory and employee's server storage (around 20 employees). So only documents (word, excel, cad drawings etc.) and database backup of the main application server (ERP, Accounting) 1 buffalo box serves as a main one, located at the server room, next to the main application server and the other buffalo box is located on the opposite side of the building (for fire protection) in a secure storage room and backs up the first one. We also have several external HDs that backs up everything from the buffalo box for an offsite backup. After 3.5 years of using these, capacity is a main limitation, I'm planning a replacement and would like to use FreeNAS (we already use monowall with great success). I would like to keep it simple and continue similar setup, building two low power boxes with 1 hd (2Tb) each. Is low power atom mobo OK? Not sure about HDs? I've read on this site somebody mentioning more seagate ES2 as more reliable and better performing. How would those eco/green drives compare. We've been pretty happy with speed of Buffalo boxes and I don't want my users to notice any slowdown. Any suggestion?

  Read the article

• After 3 files transferred through sftp using FileZilla, the queue halts. What could be causing it?

  - by Randell

  And when it's happening, all I need to do is browse the internet using Chrome or Firefox, restart FileZilla, and start the queue of files with 32MB each. Then on the 4th file in the queue, the transfer halts or slows down. What could be causing it? I'm running on 64-bit Fedora 12. Buffalo WHR-G125.

  Read the article

• Missing Setup->VLAN on DD-WRT Web GUI?

  - by leeand00

  Please note that I've already posted this question on the dd-wrt forums. I am using "DD-WRT v24-sp2 (08/07/10) std" on a WZR-HP-G300NH model Buffalo router. I've found a number of tutorials online that talk about using Setup-VLAN on the menu system of the GUI interface to configure VLANs, but on my own router, it appears that VLAN configuration is located elsewhere; mainly in the Setup-Networking-VLAN Tagging section of the GUI. I would gladly just use the bash shell to configure the vlans on the router, but every tutorial I read refers to "changing the gui to reflect the changes made in the bash prompt". Are there any tutorials or documentation that you are aware of that that refer to the Setup-Networking-VLAN Tagging GUI portion of my router?

  Read the article

• How can I set my wireless router to run on a time schedule?

  - by Joshua Robison

  I have a Buffalo AirStation WZR-HP-G301NH I am able to access it's settings via 192.168.11.1 I'm connecting wirelessly with toshiba i686 laptop on Linux Mint Debian with service pack 3 and i686 dual core kernel This is just my home network but I know that there must be a way for large industries to shut their networks down or lock out their network access temporarily based on a time schedule, automatically. Like mon - fri the network provides access from 8am to 10pm and then automatically shuts down. I want this to affect all the computers accessing this netowork... basically all my families computers so that the internet just automatically shuts down at bedtime. I am running Linux Mint Debian and so maybe I need to make a cron job or something but does anyone know how big industries implement this and how I can do it privately? TIA

  Read the article

• OpenVPN via DD-WRT

  - by user140491

  I am using DD-WRT with my Buffalo G300NH. I notice in my log files: Wed Oct 10 01:08:25 2012 us=343000 Cannot open /tmp/openvpn/dh.pem for DH parameters: error:02001003:system library:fopen:No such process: error:2006D080:BIO routines:BIO_new_file:no such file I have looked at other answers regarding this error. I have tried to no avail. 755 are chmod rights to /tmp/openvpn. At this point, I can not connect outside my LAN via OpenVPN. My server config looks like this: #mode server #tls-server push "route 192.168.11.1 255.255.255.0" push "dhcp-option DNS 10.8.0.1" server 10.8.0.0 255.255.255.0 port 1194 proto udp dev tun0 ifconfig 10.8.0.1 10.8.0.2 #secret /tmp/static.key ca /tmp/openvpn/ca.crt cert /tmp/openvpn/cert.pem key /tmp/openvpn/key.pem dh /tmp/openvpn/dh.pem keepalive 10 120 comp-lzo persist-key persist-tun verb 5 management localhost 5001 Can someone, knowledgeable, of this error kindly help? i have been going on several days, trying to sort it out. I like all nighters though!!

  Read the article

• Cloning a NAS drive which hosts a SQL Server DB

  - by Adrian Hand

  We have a system in the field running a server application which is suffering with major performance issues. The system in question has 2 onboard 300gb sas drives in RAID 5 from which it boots Windows Server 2003, and a 6tb buffalo terastation NAS unit (also RAID 5) to which the server app does all of its reading and writing. I believe the terastation is the source of all our woes. Whilst under load, reads and writes tick by at something of the order of 1meg/sec, though the network in question is hardly utilised. The terastation contains various data, but crucially hosts a full instance worth of SQL Server .mdf and .ldf files (master etc - the whole shooting match) I wish to stop all the services on the server, then take everything on the terastation and essentially clone it to some alternative onboard storage, so as to eliminate the terastation from the equation as far as poor performance is concerned. ie the terastation is currently drive D: - I want to copy everything off and then have the duplicate assume the drive letter so that as far as the software is aware, nothing is different. This is tricky because of the mdf and ldf files - everything else will work with a straight up file copy. Can anyone suggest a means to achieve what I am describing? Many thanks!

  Read the article

• building a home server with a nas appliance [closed]

  - by user51666

  Possible Duplicate: Best way to build home NAS with redundancy I was hoping to get some ideas from folks here. I'm interested in building a home web server with a nas appliance. It would be primarily used for storing pictures, video. I want a networked storage device so I can have multiple devices access it wirelessly as needed from within our home and also I want the option to access from outside the house using a login/pw access. I'm also interested in customizing, building my own web pages as well. Preferably apache. Any preferences? Does anyone have an interesting, neat set up they can share? Thanks!

  Read the article

• Why my Buffalo router keeps on sending rdp, netbios, ftp, http requests?

  - by user192702

  I have the following network setup: Buffalo Router (192.168.100.1) < Watchguard XTM21 (192.168.100.13) < PC For some reason I keep on seeing the following repeating on my XTM21's Traffic Monitor. While I have enabled Port Forwarding, none of the ports reported below were enabled. Can someone let me know why I'm seeing all of these? 2013-10-19 23:37:56 Deny 192.168.100.1 192.168.100.13 ftp/tcp 4013 21 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 282700472 win 5840" Traffic 2013-10-19 23:37:59 Deny 192.168.100.1 192.168.100.13 http/tcp 2459 80 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 296571237 win 5840" Traffic 2013-10-19 23:38:02 Deny 192.168.100.1 192.168.100.13 8000/tcp 3244 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 298709937 win 5840" Traffic 2013-10-19 23:38:05 Deny 192.168.100.1 192.168.100.13 8000/tcp 3244 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 298709937 win 5840" Traffic 2013-10-19 23:38:05 Deny 192.168.100.1 192.168.100.13 rdp/tcp 3896 3389 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 290482691 win 5840" Traffic 2013-10-19 23:38:08 Deny 192.168.100.1 192.168.100.13 netbios-ns/udp 2110 137 0-External Firebox Denied 78 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" Traffic 2013-10-19 23:38:32 Deny 192.168.100.1 192.168.100.13 ftp/tcp 4025 21 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 321868558 win 5840" Traffic 2013-10-19 23:38:35 Deny 192.168.100.1 192.168.100.13 http/tcp 2471 80 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 325918731 win 5840" Traffic 2013-10-19 23:38:38 Deny 192.168.100.1 192.168.100.13 8000/tcp 3256 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 327854525 win 5840" Traffic 2013-10-19 23:38:41 Deny 192.168.100.1 192.168.100.13 8000/tcp 3256 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 327854525 win 5840" Traffic 2013-10-19 23:38:41 Deny 192.168.100.1 192.168.100.13 rdp/tcp 3896 3389 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 327101423 win 5840" Traffic 2013-10-19 23:38:44 Deny 192.168.100.1 192.168.100.13 netbios-ns/udp 2110 137 0-External Firebox Denied 78 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" Traffic

  Read the article

• Setting up dual wireless routers

  - by JasCav

  I have two wireless routers (one is the router supplied by Verizon - MI424-WR ActionTek and the other is DD-WRT Buffalo router). I want to set them up so that I have the second router (Buffalo) on its own subnet and two SSIDs so I can put different devices on different routers and so I can put my web server on the first router and put most of my other computers behind the second router for a little extra protection in case of a compromise. From my understanding, I have to hook the two routers together so that the LAN from the Verizon router plugs into the WAN port of the Buffalo router. This is where I get stuck. What settings do I need to look for to setup the Buffalo on its own subnet? Do I need to do anything with the Verizon router, or are the configuration changes done to the Buffalo?

  Read the article

• very slow internet with Linksys WRT54GL only in wireless mode (wired is OK)

  - by gojira

  I bought a new Cisco Linksys WRT54GL router to connect my laptop (running Windows 7) to the internet. I installed Tomato 1.28 firmware on the router. When I connect the laptop to the router via ethernet cable, everything is fine and I get extremely fast up- and download speeds. When I connect wirelesssly however, websites load extremely slow - it takes dozens of seconds to load a website! <-- This is my question, how can I fix the wireless speed issue? Gmail for example is unusable this way. I tried speedtest.net, but this always fails in the upload part of the test so I can't even test the bandwidth (could the fact that it fails in the upload part, not the download part, be an indication what the problem is?!). I have isolated the problem a bit, I am convinced it has to do either with the router itself, the router settings, or the settings of the wireless connection in Win 7. Because previously, I was using another router by Buffalo and I had no problems whatsoever. I have tried to reproduce the settings from the Bufallo router as closely as possible on the Linksys router (same channel, same encryption etc). The download speed problem only occurs with the Linksys router, and only in wireless mode! When I exchange the Linksys router with the Buffalo router I have here for testing, the wireless speed is up to normal again. Also, before I had installed the Tomato firmware I had exactly the same problem, so it has nothing to do with the firmware itself. Notes & things I already tried: Changing the channel: does not seem to affect anything, I am also on the same channel (10) which I was previously on when I had a Buffalo router. QoS is off. Ping to the router itself is OK, ~ 1 ms. Some current settings of the linksys router: WAN / Internet Type: DHCP Wirelesss Mode: Access Point B/G Mode: Mixed Broadcast: check Channel: 10 - 2.457 GHz Security: WPA2 Personal Encryption: AES

  Read the article

• selenium, get text from id

  - by user3766148

  on the following url - http://www.filestube.to/26frq-Buffalo-Clover-Test-Your-Love-2014-9Jai9TJFukAS9fq9sWngAD.html I am trying to copy the; Direct links: turbobit.net/9mrb0eu9eksx/26frq.Buffalo.Clover..Test.Your.Love.2014.rar.html via css path or xpath and unable to retrieve the information and store it to a variable. firebug gives me html body div.cnt div.rH.no-js.fd div.rl div.fgBx pre span#copy_paste_links but when I apply css=html.body.div.cnt.div.rH.no-js.fd.div.rl.div.fgBx.pre.span#copy_paste_links/text() to the target, I get error not found http://i.imgur.com/KdBmDHE.png

  Read the article

• Inheritance issue with ivar on the iPhone

  - by Buffalo

  I am using the BLIP/MYNetwork library to establish a basic tcp socket connection between the iPhone and my computer. So far, the code builds and runs correctly in simulator but deploying to device yields the following error: error: property 'delegate' attempting to use ivar '_delegate' declared in super class of 'TCPConnection' @interface TCPConnection : TCPEndpoint { @private TCPListener *_server; IPAddress *_address; BOOL _isIncoming, _checkedPeerCert; TCPConnectionStatus _status; TCPReader *_reader; TCPWriter *_writer; NSError *_error; NSTimeInterval _openTimeout; } /** The delegate object that will be called when the connection opens, closes or receives messages. */ @property (assign) id<TCPConnectionDelegate> delegate; /** The delegate messages sent by TCPConnection. All methods are optional. */ @protocol TCPConnectionDelegate <NSObject> @optional /** Called after the connection successfully opens. */ - (void) connectionDidOpen: (TCPConnection*)connection; /** Called after the connection fails to open due to an error. */ - (void) connection: (TCPConnection*)connection failedToOpen: (NSError*)error; /** Called when the identity of the peer is known, if using an SSL connection and the SSL settings say to check the peer's certificate. This happens, if at all, after the -connectionDidOpen: call. */ - (BOOL) connection: (TCPConnection*)connection authorizeSSLPeer: (SecCertificateRef)peerCert; /** Called after the connection closes. You can check the connection's error property to see if it was normal or abnormal. */ - (void) connectionDidClose: (TCPConnection*)connection; @end @interface TCPEndpoint : NSObject { NSMutableDictionary *_sslProperties; id _delegate; } - (void) tellDelegate: (SEL)selector withObject: (id)param; @end Does anyone know how I would fix this? Would I simply declare _delegate as a public property of the base class "TCPEndPoint"? Thanks for the help ya'll!

  Read the article

• Anyone realize success using Apple Mac OS 10.6 and Parallels 5 for a Visual Studio Dev machine?

  - by Buffalo

  Greetings my wonderful StackOverflow family :) I grew up using Windows and switched to OSX as a Computer Science major in College. I've recently started my first real software developer job, and have a ThinkPad and Windows XP for developing ASP.NET / MS SQL applications (Visual Studio 2008). Question: Basically, I am wondering if any developers out there have had real success creating ASP.NET applications on a Mac using a VM? I've been fighting with Parallels 5 all week and finally have Windows 7 and VS 2008 running but my hot-keys are all screwed up. Is it worth the work to keep beating this thing into submission? Should I give up? Should I give Mono a try instead? Thanks Folks, I can't wait to see what you all think!

  Read the article

• Keeping the application state - deploy/install apk

  - by Buffalo

  I'm trying to have my application minimized when paused and then when it's resumed, it should be restored to its previous state, not recreated. This works perfectly when deploying the application on a device/emulator from Eclipse. The problem occurs when I get the apk (either from bin\ or from Project - Android tools - Export signed application package) and install it on a device with a file browser (Astro): the application is destroyed when paused and then recreated. I can call moveTaskToBack(true); in my activity, yet it will still be recreated when launching it. All the discussions around this are based on achieving the opposite: closing the application when minimizing it. Is there any way of achieving what I want?

  Read the article

• What's wrong with this C# CodeSnippet?

  - by Buffalo

  I've made snippets before but I must be overlooking something really simple; I cannot figure out where the error is in this snippet... <CodeSnippet Format="1.0.0" xmlns="http://schemas.microsoft.com/VisualStudio/2005/CodeSnippet"> <Header> <Title>Throw NotImplementedException()</Title> <Author>olaffuB</Author> <Shortcut>nie</Shortcut> <Description>Quickly add a new NotImplementedException() to code.</Description> <SnippetTypes> <SnippetType>Expansion</SnippetType> </SnippetTypes> </Header> <Snippet> <Declarations> <Literal> <ID>TODO</ID> <Default></Default> </Literal> </Declarations> <Code Language="C#"> <![CDATA[throw new NotImplementedException("$TODO$"); // TODO: $TODO$]]> </Code> </Snippet> Basically, when I got to import the snippet, it says that it is "invalid". The file name is "nie.snippet". Thanks!

  Read the article

• Can't do more than one activity at a time after switching modems

  - by vallorn

  I had to replace the Motorola 2210 DSL modem that I got when I signed up for AT&T DSL Direct a few years ago. The modem kept randomly restarting and it eventually gave out on me. I am assuming overheating was the cause here because it was almost too hot to touch. In any case, I replaced it with a Netgear DM111PSP. It works fine but I can't do more than one activity at a time with it. If my wife is watching Netflix, there is a noticeable delay/latency when trying to view web sites. It's even worse if I try to play an on-line game while she's streaming; the game is basically unplayable. The odd thing is, the only other activity I can do while she's streaming is stream another Netflix show myself. There is no delay when doing that, no buffering either. I'm not a networking guy so maybe there is an explanation for it but I find that kind of odd. I've tried using QoS through my Buffalo N600 wireless router and it doesn't seem to help. With the old Motorola modem, she could be watching Netflix while I play a game and everything worked just fine. Is there anything I can check or reconfigure possibly on the modem that would account for this? Should I just ditch the Netgear and get another modem instead? I have the Netgear modem connected to the Buffalo router in a bridged mode. Its the same exact setup as I had with the Motorola and as far as I can tell, it's not the router that is the cause.

  Read the article

• Devices on one switch can't see devices on another switch

  - by jockey69

  I have RoadRunner Internet cable service hooked to a Motorola Surfboard modem. This is connected to a 10/100 wireless router (located in the garage). Downstairs, I have a ZyXEL GS-108b gigabit switch connected to one port on the router. From this switch I ran connections to a PS3, DVR, Vonage box and a wireless router (Buffalo AirStation 10/100). The Buffalo AirStation works as a wireless AP for other laptops, iPads and cell phones. Upstairs, I have an Asus gigabit switch connected to a gaming desktop, printer, and a media server on FreeNAS (PS3 Media Server on FreeNAS). The router is configured to assign static IPs to both the PS3 and the media server. Problem - I connect a laptop to the switch downstairs after disabling the wireless, thus making sure that I am accessing internet through the wired connection (and the router in the garage). All my computers, iPads and cell phones are able to connect to the internet without a problem. My PS3 connects to the interent with a wired connection but is unable to access the media server (I get a message that no media server is found). I used a wired laptop downstairs (connected to switch downstairs) but am unable to ping either the PS3 or media server! I may be doing something silly but am at my wits' end. Please help!

  Read the article

1 2 3  | Next Page >