Search Results

Search found 67 results on 3 pages for 'buffalo'.

Page 2/3 | < Previous Page | 1 2 3  | Next Page >

• A driver (service) for this device has been disabled. Is how the code 32 starts off:

  - by E S

  A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32) No drive letter show in device manager, and the dvd/cd is now not useable because it is not seen. This all happened, when i starting using a new, external usb hard drive from Buffalo. I have win 7 64bit. Everything else looks to be working fine. I even out of desperation, tried to hook up, and external dvd that had worked fine in the past. Just too slow and ate up memory, so i never used it. It tries to use the same drives, and when you click to update drivers, it says this is the best one. HELP.... even if i wanted, (WHICH I DON'T), to use the factory win 7 re-installation dvd, how,lol. No drive to install it from in this situation. I am at a lose here, and Buffalo tec was of no help at all. Just said he could not help. Any help would be much appreciated.

  Read the article

• Troubleshooting wireless client-bridged networks between two DD-WRT routers?

  - by KronoS

  I recently purchased a Buffalo N600 wireless router which came with DD-WRT pre-installed. I want to take my old wireless router a Linksys WRT54GL, also with DD-WRT pre-installed, and use it as a wireless bridge for my HTPC and Blu-Ray Player in the other room. I other words, I'm trying to connect to WIRED networks via the wireless on the routers. I followed eactly the instruction from DD-WRT's manual for 'Client Bridged' however I'm still not able to connect to two routers correctly, when the encryption is enabled (WPA2-Personal Mixed) however I am able to connect the two routers when there is NO encryption. I've checked, double checked, and triple checked that EVERYTHING is the same on BOTH routers: Routers 1 & 2 Encryption: WPA2-Personal Mixed Wireless Mode: G-Only Wireless Channel: 6 Subnet Mask: 255.255.255.0 Subnet: 192.168.1.0/254 SSID: Krono$ Primary Router #1 (Buffalo N600) IP Address: 192.168.1.1 Firewall: Enables w/ defaults DCHP: Enabled as DHCP Server Secondary Router #2 (Linksys WRT54GL) IP Address: 192.168.1.2 Firewall: Disabled as per DD-WRT instructions I'm looking for any configurations that I may have missed, or settings that may need to happen in order for this work.

  Read the article

• External HDD USB 3.0 failure

  - by Philip

  [ 2560.376113] usb 9-1: new high-speed USB device number 2 using xhci_hcd [ 2560.376186] usb 9-1: Device not responding to set address. [ 2560.580136] usb 9-1: Device not responding to set address. [ 2560.784104] usb 9-1: device not accepting address 2, error -71 [ 2560.840127] hub 9-0:1.0: unable to enumerate USB device on port 1 [ 2561.080182] usb 10-1: new SuperSpeed USB device number 5 using xhci_hcd [ 2566.096163] usb 10-1: device descriptor read/8, error -110 [ 2566.200096] usb 10-1: new SuperSpeed USB device number 5 using xhci_hcd [ 2571.216175] usb 10-1: device descriptor read/8, error -110 [ 2571.376138] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2571.744174] usb 10-1: new SuperSpeed USB device number 7 using xhci_hcd [ 2576.760116] usb 10-1: device descriptor read/8, error -110 [ 2576.864074] usb 10-1: new SuperSpeed USB device number 7 using xhci_hcd [ 2581.880153] usb 10-1: device descriptor read/8, error -110 [ 2582.040123] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2582.224139] hub 9-0:1.0: unable to enumerate USB device on port 1 [ 2582.464177] usb 10-1: new SuperSpeed USB device number 9 using xhci_hcd [ 2587.480122] usb 10-1: device descriptor read/8, error -110 [ 2587.584079] usb 10-1: new SuperSpeed USB device number 9 using xhci_hcd [ 2592.600150] usb 10-1: device descriptor read/8, error -110 [ 2592.760134] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2593.128175] usb 10-1: new SuperSpeed USB device number 11 using xhci_hcd [ 2598.144183] usb 10-1: device descriptor read/8, error -110 [ 2598.248109] usb 10-1: new SuperSpeed USB device number 11 using xhci_hcd [ 2603.264171] usb 10-1: device descriptor read/8, error -110 [ 2603.480157] usb 10-1: new SuperSpeed USB device number 12 using xhci_hcd [ 2608.496162] usb 10-1: device descriptor read/8, error -110 [ 2608.600091] usb 10-1: new SuperSpeed USB device number 12 using xhci_hcd [ 2613.616166] usb 10-1: device descriptor read/8, error -110 [ 2613.832170] usb 10-1: new SuperSpeed USB device number 13 using xhci_hcd [ 2618.848135] usb 10-1: device descriptor read/8, error -110 [ 2618.952079] usb 10-1: new SuperSpeed USB device number 13 using xhci_hcd [ 2623.968155] usb 10-1: device descriptor read/8, error -110 [ 2624.184176] usb 10-1: new SuperSpeed USB device number 14 using xhci_hcd [ 2629.200124] usb 10-1: device descriptor read/8, error -110 [ 2629.304075] usb 10-1: new SuperSpeed USB device number 14 using xhci_hcd [ 2634.320172] usb 10-1: device descriptor read/8, error -110 [ 2634.424135] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2634.776186] usb 10-1: new SuperSpeed USB device number 15 using xhci_hcd [ 2639.792105] usb 10-1: device descriptor read/8, error -110 [ 2639.896090] usb 10-1: new SuperSpeed USB device number 15 using xhci_hcd [ 2644.912172] usb 10-1: device descriptor read/8, error -110 [ 2645.128174] usb 10-1: new SuperSpeed USB device number 16 using xhci_hcd [ 2650.144160] usb 10-1: device descriptor read/8, error -110 [ 2650.248062] usb 10-1: new SuperSpeed USB device number 16 using xhci_hcd [ 2655.264120] usb 10-1: device descriptor read/8, error -110 [ 2655.480182] usb 10-1: new SuperSpeed USB device number 17 using xhci_hcd [ 2660.496121] usb 10-1: device descriptor read/8, error -110 [ 2660.600086] usb 10-1: new SuperSpeed USB device number 17 using xhci_hcd [ 2665.616167] usb 10-1: device descriptor read/8, error -110 [ 2665.832177] usb 10-1: new SuperSpeed USB device number 18 using xhci_hcd [ 2670.848110] usb 10-1: device descriptor read/8, error -110 [ 2670.952066] usb 10-1: new SuperSpeed USB device number 18 using xhci_hcd [ 2675.968081] usb 10-1: device descriptor read/8, error -110 [ 2676.072124] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2786.104531] xhci_hcd 0000:02:00.0: remove, state 4 [ 2786.104546] usb usb10: USB disconnect, device number 1 [ 2786.104686] xHCI xhci_drop_endpoint called for root hub [ 2786.104692] xHCI xhci_check_bandwidth called for root hub [ 2786.104942] xhci_hcd 0000:02:00.0: USB bus 10 deregistered [ 2786.105054] xhci_hcd 0000:02:00.0: remove, state 4 [ 2786.105065] usb usb9: USB disconnect, device number 1 [ 2786.105176] xHCI xhci_drop_endpoint called for root hub [ 2786.105181] xHCI xhci_check_bandwidth called for root hub [ 2786.109787] xhci_hcd 0000:02:00.0: USB bus 9 deregistered [ 2786.110134] xhci_hcd 0000:02:00.0: PCI INT A disabled [ 2794.268445] pci 0000:02:00.0: [1b73:1000] type 0 class 0x000c03 [ 2794.268483] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff] [ 2794.268689] pci 0000:02:00.0: PME# supported from D0 D3hot [ 2794.268700] pci 0000:02:00.0: PME# disabled [ 2794.276383] pci 0000:02:00.0: BAR 0: assigned [mem 0xd7800000-0xd780ffff] [ 2794.276398] pci 0000:02:00.0: BAR 0: set to [mem 0xd7800000-0xd780ffff] (PCI address [0xd7800000-0xd780ffff]) [ 2794.276419] pci 0000:02:00.0: no hotplug settings from platform [ 2794.276658] xhci_hcd 0000:02:00.0: enabling device (0000 -> 0002) [ 2794.276675] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2794.276762] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 2794.276771] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2794.276913] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 2794.395760] xhci_hcd 0000:02:00.0: irq 16, io mem 0xd7800000 [ 2794.396141] xHCI xhci_add_endpoint called for root hub [ 2794.396144] xHCI xhci_check_bandwidth called for root hub [ 2794.396195] hub 9-0:1.0: USB hub found [ 2794.396203] hub 9-0:1.0: 1 port detected [ 2794.396305] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2794.396371] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10 [ 2794.396496] xHCI xhci_add_endpoint called for root hub [ 2794.396499] xHCI xhci_check_bandwidth called for root hub [ 2794.396547] hub 10-0:1.0: USB hub found [ 2794.396553] hub 10-0:1.0: 1 port detected [ 2798.004084] usb 1-3: new high-speed USB device number 8 using ehci_hcd [ 2798.140824] scsi21 : usb-storage 1-3:1.0 [ 2820.176116] usb 1-3: reset high-speed USB device number 8 using ehci_hcd [ 2824.000526] scsi 21:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2824.002263] sd 21:0:0:0: Attached scsi generic sg2 type 0 [ 2824.003617] sd 21:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2824.005139] sd 21:0:0:0: [sdb] Write Protect is off [ 2824.005149] sd 21:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2824.009084] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.009094] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.011944] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.011952] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.049153] sdb: sdb1 [ 2824.051814] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.051821] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.051825] sd 21:0:0:0: [sdb] Attached SCSI disk [ 2839.536624] usb 1-3: USB disconnect, device number 8 [ 2844.620178] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2844.640281] scsi22 : usb-storage 10-1:1.0 [ 2850.326545] scsi 22:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2850.327560] sd 22:0:0:0: Attached scsi generic sg2 type 0 [ 2850.329561] sd 22:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2850.329889] sd 22:0:0:0: [sdb] Write Protect is off [ 2850.329897] sd 22:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2850.330223] sd 22:0:0:0: [sdb] No Caching mode page present [ 2850.330231] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.331414] sd 22:0:0:0: [sdb] No Caching mode page present [ 2850.331423] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.384116] usb 10-1: USB disconnect, device number 2 [ 2850.392050] sd 22:0:0:0: [sdb] Unhandled error code [ 2850.392056] sd 22:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2850.392061] sd 22:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 2850.392074] end_request: I/O error, dev sdb, sector 0 [ 2850.392079] quiet_error: 70 callbacks suppressed [ 2850.392082] Buffer I/O error on device sdb, logical block 0 [ 2850.392194] ldm_validate_partition_table(): Disk read failed. [ 2850.392271] Dev sdb: unable to read RDB block 0 [ 2850.392377] sdb: unable to read partition table [ 2850.392581] sd 22:0:0:0: [sdb] READ CAPACITY failed [ 2850.392584] sd 22:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2850.392588] sd 22:0:0:0: [sdb] Sense not available. [ 2850.392613] sd 22:0:0:0: [sdb] Asking for cache data failed [ 2850.392617] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.392621] sd 22:0:0:0: [sdb] Attached SCSI disk [ 2850.732182] usb 10-1: new SuperSpeed USB device number 3 using xhci_hcd [ 2850.752228] scsi23 : usb-storage 10-1:1.0 [ 2851.752709] scsi 23:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2851.754481] sd 23:0:0:0: Attached scsi generic sg2 type 0 [ 2851.756576] sd 23:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2851.758426] sd 23:0:0:0: [sdb] Write Protect is off [ 2851.758436] sd 23:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2851.758779] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.758787] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.759968] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.759977] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.817710] sdb: sdb1 [ 2851.820562] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.820568] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.820572] sd 23:0:0:0: [sdb] Attached SCSI disk [ 2852.060352] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.076533] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.076538] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.196329] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.212593] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.212599] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.456290] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.472402] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.472408] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.624304] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.640531] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.640536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.772296] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.788536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.788541] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.920349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.936536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.936540] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2853.072287] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2853.088565] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2853.088570] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.176339] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.192561] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.192567] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.320349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.336526] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.336531] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.468344] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.484551] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.484556] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.612349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.628540] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.628545] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.756350] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.772528] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.772533] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.848116] usb 10-1: USB disconnect, device number 3 [ 2884.851493] scsi 23:0:0:0: [sdb] killing request [ 2884.851501] scsi 23:0:0:0: [sdb] killing request [ 2884.851699] scsi 23:0:0:0: [sdb] Unhandled error code [ 2884.851702] scsi 23:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2884.851708] scsi 23:0:0:0: [sdb] CDB: Read(10): 28 00 00 5f 2b ee 00 00 3e 00 [ 2884.851721] end_request: I/O error, dev sdb, sector 6237166 [ 2884.851726] Buffer I/O error on device sdb1, logical block 6237102 [ 2884.851730] Buffer I/O error on device sdb1, logical block 6237103 [ 2884.851738] Buffer I/O error on device sdb1, logical block 6237104 [ 2884.851741] Buffer I/O error on device sdb1, logical block 6237105 [ 2884.851744] Buffer I/O error on device sdb1, logical block 6237106 [ 2884.851747] Buffer I/O error on device sdb1, logical block 6237107 [ 2884.851750] Buffer I/O error on device sdb1, logical block 6237108 [ 2884.851753] Buffer I/O error on device sdb1, logical block 6237109 [ 2884.851757] Buffer I/O error on device sdb1, logical block 6237110 [ 2884.851807] scsi 23:0:0:0: [sdb] Unhandled error code [ 2884.851810] scsi 23:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2884.851813] scsi 23:0:0:0: [sdb] CDB: Read(10): 28 00 00 5f 2c 2c 00 00 3e 00 [ 2884.851824] end_request: I/O error, dev sdb, sector 6237228 [ 2885.168190] usb 10-1: new SuperSpeed USB device number 4 using xhci_hcd [ 2885.188268] scsi24 : usb-storage 10-1:1.0 Please help me with my problem. I got this after running dmesg.

  Read the article

• Windows XP: saving large files on network share stalls

  - by mklhmnn

  When I transfer larger files (a few hundred MB) on a network share (either Buffalo LinkStation or other Windows machine) from my Windows XP Pro SP3, it always stalls. Smaller files are no problem, reading from a network share is also no problem. I already had this problem on my notebook and now on my desktop machine, so I assume that it most likely is no driver problem. Does anybody have a clue what could be the problem — or better: the solution?

  Read the article

• Wired and wireless network file sharing

  - by Megan

  I have connected my Internet to a buffalo air station router and a swtich. Computers and Laptops on this network connect to the Internet wired and wirelessly. I would like to share files locally on this network but I can't access the laptop's which connect wirelessly. I have shared folders on each computer but I would like to know if local file sharing is possible as all the computers utimately connect to the same router. All computers are running Windows 7.

  Read the article

• Valentine's Day in sunny Ottawa, Ontario

  - by Roy F. Swonger

  Birds may fly south for the winter, but I will be heading to Ottawa, Ontario next week for a workshop on 15-FEB. I'm pretty used to winter because I grew up in the snow belt southeast of Buffalo, NY -- and this winter in New England is helping me get prepared as well. For reference, the big lump is my gas grill. Anyway, I'm looking forward to a good workshop and to visiting Ottawa for my first time. If you're in the Ottawa/Gatineau area and would like to attend, please contact your account team for more information.

  Read the article

• Logitech M515 does not work after upgrade to 12.04

  - by user877329

  After upgrading to 12.04, my Logitech M515 does not work here is some output from the terminal: lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0411:002a BUFFALO INC. (formerly MelCo., Inc.) Bus 001 Device 004: ID 055d:3021 Samsung Electro-Mechanics Co. Bus 002 Device 002: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard Bus 004 Device 002: ID 0582:0074 Roland Corp. EDIROL UA-25 Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver dmesg | grep Logitech [ 30.470528] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input2 The cursor does not move. Also the mouse was working in 11.10 and is working in Windows NT 5.1.2600.

  Read the article

• 2 Days of Share &amp; Point

  - by Mark Rackley

  Groovy man… SharePoint Saturday Ozarks is back for 2010, bigger and better than before. Join us for a far out time and learn more about SharePoint in one day than you could in a year from the man… Yes! SharePoint Saturday Ozarks is back! SharePoint Saturday Ozarks is the largest SharePoint conference in Arkansas, Southern Missouri, and the very north east tip of Oklahoma. Last year we had a great turn out with 20 speakers, 5 MVPs, and attendees coming from Arkansas, Texas, Oklahoma, Missouri, Kansas, Nebraska, Indiana, Ohio, Alabama, Michigan, and Washington. Hey Man… what’s SharePoint Saturday anyway? Sounds like a conspiracy man… Not to worry, SharePoint Saturday is not an arm of the government bent on mind control or any attempt what-so-ever to bring you down man. SharePoint Saturday is grass roots effort started by Michael Lotter (http://www.sharepointsaturday.org/pages/about.aspx). It is a FREE one day event where the best SharePoint speakers gather to present their love, hatred, and frustrations of SharePoint to those lucky individuals who attend. Lessons are learned, contacts are made, prizes are won, food is eaten, assorted beverages are consumed until wee hours of the morning. SharePoint Saturday started with just a few sporadic one day events here and there. However, over the past year SharePoint Saturday has exploded and it’s hard to find a weekend where there is NOT a SharePoint Saturday event happing in some corner of the globe. There are even occasions where there are two SharePoint Saturdays on the same day! Many people are pleasantly surprised at the caliber of speakers at these SharePoint Saturday events. For the most part, these speakers are more eloquent, practiced, and practical than those speakers you find at the major multi-day conferences. These guys aren’t even paid to speak.. they do it out of love man… SharePoint Saturday Ozarks 2009 Alumni We had a star studded cast last year with many returning this year! Just check out the fun that they had… John Ferringer – Admin rockstar… I can still sense the awesomeness   SharePoint poster children Mike Watson & Laura Rogers     Lori Gowin spreading the SharePoint Love Eric Shupps is a little bit country and a little bit rock and roll       Cathy Dew, Sean McDonough, and JD Wade relaxing between gigs Actually, you can see real photos from last year’s SharePoint Saturday ozarks here:  picasaweb.google.com/mrackley/SharePointSaturdayOzarks#    What’s new for SharePoint Saturday Ozarks 2010 SharePoint Saturday Ozarks 2010 will totally blow your mind man. We’re getting the band back to together with many returning speakers and few new faces. Joel Oleson will be speaking this year, maybe he’ll grace us with his song stylings. Sadly, once again, Andrew Connell will not be able to attend SharePoint Saturday Ozarks, however he did feel the need to show his support in his own way. Prizes this year currently include books, software, a Zune HD, and much more! Wait Man… You said 2 days? I thought it was a one day event? Correct you are my herbal smelling friend… SharePoint Saturday Ozarks 2010 will spread the love an additional day this year. The first day will be all about the SharePoint love, on day 2 we will be taking a leisurely float down the Buffalo National River for those interested in a truly unique experience (no banjos allowed please).   Here are the details: WHAT 4 – 5 hour float down the Buffalo National River WHEN & WHERE Sunday June 13th. We will be leaving at 10am from the Parking Lot of: Gordon’s Motel & Canoe Rental Old Highway 7 Jasper, AR 72641 (870) 446-5252 Jasper is about 30 minutes south of Harrison, AR on Highway 7 South. You are responsible for bumming a ride to/from Gordon’s Motel, but they will be shuttling us to/from the river and providing canoes and a boxed lunch. WHAT ELSE? The float trip is dependent on the weather of course, we won’t be floating down the river in a thunderstorm, however I planned SPS Ozarks around a time of year ideal for floating. We aren’t talking class 5 rapids here, you don’t need any real skill, but you need to be okay with possibly tipping your canoe over once or twice. You can bring your own assorted beverages with you, but glass containers are not allowed on the river. I suggest a small cooler with extra snacks and drinks. Also bring clothing you can get wet in (these SharePoint people can get ornery). HOW DO I SIGN UP? When you register for SharePoint Saturday Ozarks, you will have the option to also sign up for the float trip. Seats are limited though! If you do not intend to go, please do not take someone else’s place.  The cost for the float trip will be about $35 dollars per person (which you are responsible for unless we find a sponsor). The price includes shuttle to/from river, canoe, life jackets, paddles, and boxed lunch. Far out man… how do I register??? You can register for SharePoint Saturday Ozarks by going to http://spsozarks.eventbrite.com/ We are limited to 200 people for the conference and 50 people for the float trip, so register today before we are sold out. Lodging for SharePoint Saturday Ozarks will once again take place at the Hotel Seville: Annex Suites are available for $103.20 This is So Groovy.. How can I help? I’m glad you asked! We are still looking for a few sponsors and one or two more speakers. If you are interested please let me know!  You can find out more information at http://www.sharepointsaturday.org/ozarks Hey… wait a minute…. what exactly IS SharePoint man??? Come to SharePoint Saturday Ozarks and find out!!  See you guys there!

  Read the article

• PPTP VPN on OS X and iOS failed to connect Facebook and Youtube

  - by bGiraffe

  Thnaks for reading. I setup a VPN server on my Buffalo WHR-HP-G300N router at Macau, and use it for access website over China Firewall when i travel in China. On Android and Windows, everything work fine, however on my Macbook Air and iPad, it is not working. I can access blocked site like badoo.com but not facebook and youtube. If i ping it at terminal, it said "ping: cannot resolve facebook.com: Unknown host". After i read this http://cp.hidemynet.com/knowledgebase.php?action=displayarticle&id=26, i find i can restart my router and reboot my Macbook, and connect to VPN before any request to any blocked site so that i can successfully connect to facebook and youtube. However it works sometime but not always. It is really annoying because i need to work on VPN and my Mac, would anyone can help me to solve it? Rather than restarting my router and my Mac every time. Please HELP!!! regards

  Read the article

• How can I setup a subnetwork using DDWRT and a 2Wire?

  - by MadBurn

  Ok, I'm having a bit of trouble getting this setup. I'm not really sure what direction I need to be looking in. I am on ATT UVerse and I have to use their horrible 2Wire Modem/Router. But with this router, I have very limited control over my network and my wifi range is too small for my house. But, I have a hardwire ran to my TV which I have hooked into a switch and split the line to my PS3. The problem I'm having, is I don't know how to get the Buffalo DD-WRT setup as a subnetwork so that the PS3 can find my Media Server. Here is a diagram of what I'm trying to accomplish: Blue is ethernet.

  Read the article

• how to connect only ethernet and only wireless hosts together

  - by Ashok Das

  Here is my problem. I have an android tablet that have only WiFi for network connectivity and I have a windows server that have only Ethernet ports for network connection. Now I want to telnet to my server from my tablet. I think some wireless to Ethernet converter required in between. I am planning to use Buffalo Air Station WCR-GN or TP-LINK TL-WR740N or TL-WR702N. The connection setup should be like this: [server]<---Ethernet---[WIFI router]<---wireless---[Tablet]. Now I am in doubt will this setup work? Anybody please help me with this. Regards Ashok

  Read the article

• How do I connect to my wireless router settings on Linux?

  - by Joshua Robison

  My network is as follows: Internet Provider's DSL modem connected to Internet Provider's router connected to My Buffalo Wireless router connected to My Toshiba Laptop via WEP network My Toshiba Laptop is running LMDE Linux Mint Debian Edition Service Pack 3 i686 kernel I have experience using various routers and their configuration settings but for some reason I can not access my wireless router. In my cromium browser I tried the following ip addresses: Standard Usual IPs : 192.168.1.1, 192.168.0.1 (connection hangs and goes no where) On the back of my router: 192.168.11.1, 192.168.11.100 (connection hangs and goes nowhere ) In some tcpip info: 192.168.24.1 (unable to connect error message) If someone could give me some terminal commands that will help me find my wireless router address or some trouble shooting ideas, I would be very thankful.

  Read the article

• Why can't my networks reach each other?

  - by HOLOGRAPHICpizza

  We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

  Read the article

• DD-WRT Router Can't hold a connection after initial setup...

  - by AC

  Struggeling with my new DDWRT router (Buffalo WZR-HP-G300NH) configuration. I configured it using one machine while comparing the settings on my existing Linksys WRT54GL on another machine. To the best of my knowledge, I've set it up the same way as my Linksys, but DDWRT has so many other options. After configuring it, I plugged it into the modem, VOIP device & my network. I see the phones come back online. However after a few minutes, it seems I lose the outbound connection (phones die and I can't get out over HTTP). What's confusing me is it works for a few minutes, then it fails. No idea what to look for. Ideas?

  Read the article

• DD-WRT with both https and sshd running in port 443

  - by Bruno

  I have a buffalo router with dd-wrt v24 SP2. After setting up the basic stuff, I enabled the https access to the admin page. Several days later, while setting up remote ssh, I changed the default port from 22 to 443. And now..well :) You got the picture :) I can ssh the router but I have no web access to it's admin page. Before rushing to a cold-hearted configuration reset, is there any way to change the ssh port from a shell? Or make dd-wrt accessible thru basic http?

  Read the article

• Why does my ping command (Windows) results alternate between "timeout" and "network is not reachable"?

  - by Sopalajo de Arrierez

  My Windows is in Spanish, so I will have to paste console outputs in that language (I think that translating without knowing the exact terms used in english versions could give worse results than leaving it as it appears on screen). This is the issue: when pinging a non-existent IP from a WinXP-SP3 machine (clean Windows install, just formatted), I get sometimes a "Timeout" result, and sometimes a "network is not reachable" message. This is the result of: ping 192.168.210.1 Haciendo ping a 192.168.210.1 con 32 bytes de datos: Tiempo de espera agotado para esta solicitud. Respuesta desde 80.58.67.86: Red de destino inaccesible. Respuesta desde 80.58.67.86: Red de destino inaccesible. Tiempo de espera agotado para esta solicitud. Estadísticas de ping para 192.168.210.1: Paquetes: enviados = 4, recibidos = 2, perdidos = 2 (50% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms 192.168.210.1 does not exist on the network. DHCP client is enabled, and the computer gets assigned those network config by the router. My IP: 192.168.11.2 Netmask: 255.255.255.0 Gateway: 192.168.11.1 DNS: 80.58.0.33/194.224.52.36 This is the output from "route print command": =========================================================================== Rutas activas: Destino de red Máscara de red Puerta de acceso Interfaz Métrica 0.0.0.0 0.0.0.0 192.168.11.1 192.168.11.2 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.11.0 255.255.255.0 192.168.11.2 192.168.11.2 20 192.168.11.2 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.11.255 255.255.255.255 192.168.11.2 192.168.11.2 20 224.0.0.0 240.0.0.0 192.168.11.2 192.168.11.2 20 255.255.255.255 255.255.255.255 192.168.11.2 192.168.11.2 1 255.255.255.255 255.255.255.255 192.168.11.2 3 1 Puerta de enlace predeterminada: 192.168.11.1 =========================================================================== Rutas persistentes: ninguno The output of: ping 1.1.1.1 Haciendo ping a 1.1.1.1 con 32 bytes de datos: Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Estadísticas de ping para 1.1.1.1: Paquetes: enviados = 4, recibidos = 0, perdidos = 4 1.1.1.1 does not exist on the network. and the output of: ping 10.1.1.1 Haciendo ping a 10.1.1.1 con 32 bytes de datos: Respuesta desde 80.58.67.86: Red de destino inaccesible. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Respuesta desde 80.58.67.86: Red de destino inaccesible. Estadísticas de ping para 10.1.1.1: Paquetes: enviados = 4, recibidos = 2, perdidos = 2 (50% perdidos), 10.1.1.1 does not exist on the network. I can do some aproximate translation of what you demand if necessary. I have another computers in the same network (WinXP-SP3 and Win7-SP1), and they have, too, this problem. Gateway (Router): Buffalo WHR-HP-GN (official Buffalo firmware, not DD-WRT). I have some Linux (Debian/Kali) machine in my network, so I tested things on it: ping 192.168.210.1 PING 192.168.210.1 (192.168.210.1) 56(84) bytes of data. From 80.58.67.86 icmp_seq=1 Packet filtered From 80.58.67.86 icmp_seq=2 Packet filtered From 80.58.67.86 icmp_seq=3 Packet filtered From 80.58.67.86 icmp_seq=4 Packet filtered to the non-existing 1.1.1.1 : ping 1.1.1.1 PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data. ^C --- 1.1.1.1 ping statistics --- 153 packets transmitted, 0 received, 100% packet loss, time 153215ms (no response after waiting a few minutes). and the non-existing 10.1.1.1: ping 10.1.1.1 PING 10.1.1.1 (10.1.1.1) 56(84) bytes of data. From 80.58.67.86 icmp_seq=20 Packet filtered From 80.58.67.86 icmp_seq=22 Packet filtered From 80.58.67.86 icmp_seq=23 Packet filtered From 80.58.67.86 icmp_seq=24 Packet filtered From 80.58.67.86 icmp_seq=25 Packet filtered What is going on here? I am posing this question mainly for learning purposes, but there is another reason: when all pings are returning "timeout", it creates an %ERRORLEVEL% value of 1, but if there is someone of "Network is not reachable" type, %ERRORLEVEL% goes to 0 (no error), and this could be inappropriate for a shell script (we can not use ping to detect, for example, if the network is down due to loss of contact with the gateway).

  Read the article

• Restoring an Ubuntu Server using ZFS RAIDZ for data

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own Home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and ZFS (OS on 1 Ext4 disk, Data on 3 RAIDZ disks). As Joel Spolsky and Geoff Atwood say with regards to backup, I can't rest until I have done a restore in all of the failure scenarios that I am seeking to protect against. Q: How to configure Ubuntu Server to recognise a pre-existing RAIDZ array? Clearly if one of the data disks die - then that is a resilvering scenario, which is well documented. If two of the data disks die, then I am into regular backup/restore land. If the OS dies and I can restore, also an easy scenario. But if the OS dies and I can't restore, then I need to recreate an Ubuntu server. But how do I get this to recognise my RAID-Z array? Is the necessary configuration information stored within and across the RAIZ array and simply need to be found (if so, how)? Or does it reside on the OS ext4 disk (in which case how do I recreate it)?

  Read the article

• Restoring an Ubuntu Server using ZFS RAID-Z for data

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own Home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and ZFS (OS on 1 Ext4 disk, Data on 3 RAID-Z disks). As Joel Spolsky and Geoff Atwood say with regards to backup, I can't rest until I have done a restore in all of the failure scenarios that I am seeking to protect against. Q: How to configure Ubuntu Server to recognise a pre-existing RAID-Z array? Clearly if one of the data disks die - then that is a resilvering scenario, which is well documented. If two of the data disks die, then I am into regular backup/restore land. If the OS dies and I can restore, also an easy scenario. But if the OS dies and I can't restore, then I need to recreate an Ubuntu server. But how do I get this to recognise my RAID-Z array? Is the necessary configuration information stored within and across the RAID-Z array and simply need to be found (if so, how)? Or does it reside on the OS ext4 disk (in which case how do I recreate it)?

  Read the article

• Why is Samba Access from Windows So Slow?

  - by swalker2001

  I have set up a file server using Ubuntu 12.04 Server. The purpose is to serve several network drives to Windows users that have heretofore been served by numerous NAS drives. I have Samba set up with one share defined so far. I can connect to it fine from my test Windows 7 and Windows XP machines. When I do a directory listing on the share from Windows, it can take up to two minutes to get all the files listed--would have taken about 1.5 seconds when I was using the Buffalo NAS. Sometimes it times out with no response at all. I have used the default smb.conf and simply added the following for the share I have set up so far: [engineering] comment = Ubuntu File Server Share path = /networkdriveshares/engineering browsable = yes guest ok = yes read only = no create mask = 0755 I have tried changing the workgroup setting to the Active Domain name our Windows computer use but didn't notice any difference. The only other change I made to the default smb.conf was adding in the recommended socket settings: SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY Lots of information about slow Samba shares online but I have tried all of the solutions I have found and none have made a lick of difference. If there is no solution, is there a better way to set up a file server to be used by Windows clients?

  Read the article

• Compute the AES-encryption key given the plaintext and its ciphertext?

  - by Null Pointers etc.

  I'm tasked with creating database tables in Oracle which contain encrypted strings (i.e., the columns are RAW). The strings are encrypted by the application (using AES, 128-bit key) and stored in Oracle, then later retrieved from Oracle and decrypted (i.e., Oracle itself never sees the unencrypted strings). I've come across this one column that will be one of two strings. I'm worried that someone will notice and presumably figure out what those two values to figure out the AES key. For example, if someone sees that the column is either Ciphertext #1 or #2: Ciphertext #1: BF,4F,8B,FE, 60,D8,33,56, 1B,F2,35,72, 49,20,DE,C6. Ciphertext #2: BC,E8,54,BD, F4,B3,36,3B, DD,70,76,45, 29,28,50,07. and knows the corresponding Plaintexts: Plaintext #1 ("Detroit"): 44,00,65,00, 74,00,72,00, 6F,00,69,00, 74,00,00,00. Plaintext #2 ("Chicago"): 43,00,68,00, 69,00,63,00, 61,00,67,00, 6F,00,00,00. can he deduce that the encryption key is "Buffalo"? 42,00,75,00, 66,00,66,00, 61,00,6C,00, 6F,00,00,00. I'm thinking that there should be only one 128-bit key that could convert Plaintext #1 to Ciphertext #1. Does this mean I should go to a 192-bit or 256-bit key instead, or find some other solution? (As an aside, here are two other ciphertexts for the same plaintexts but with a different key.) Ciphertext #1 A ("Detroit"): E4,28,29,E3, 6E,C2,64,FA, A1,F4,F4,96, FC,18,4A,C5. Ciphertext #2 A ("Chicago"): EA,87,30,F0, AC,44,5D,ED, FD,EB,A8,79, 83,59,53,B7.

  Read the article

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

• in free(): error: junk pointer, too high to make sense Segmentation fault: 11 (core dumped) gprof

  - by Mayank

  I am trying to profile my application. For this I compiled my code with -pg and -lc_p option, it compiled successfully During run time I am getting the following error. in free(): error: junk pointer, too high to make sense Segmentation fault: 11 (core dumped) Doing GDB gives error as. (gdb) b main Breakpoint 1 at 0x5124d4: (gdb) r warning: Unable to get location for thread creation breakpoint: generic error [New LWP 100085] cacheIp in free(): error: junk pointer, too high to make sense Program received signal SIGSEGV, Segmentation fault. [Switching to LWP 100085] 0x00000000006c3a1f in pthread_sigmask () My application is multi threaded and is a combination of C and C++ code. uname -a FreeBSD 6.3-RELEASE FreeBSD 6.3-RELEASE #0: Wed Jan 16 01:43:02 UTC 2008 [email protected].buffalo.edu:/usr/obj/usr/src/sys/SMP amd64 Why is the code crashing. Am I missing something.

  Read the article

• Inflector for .NET

  - by srkirkland

  I was writing conventions for FluentNHibernate the other day and I ran into the need to pluralize a given string and immediately thought of the ruby on rails Inflector.  It turns out there is a .NET library out there also capable of doing word inflection, originally written (I believe) by Andrew Peters, though the link I had no longer works.  The entire Inflector class is only a little over 200 lines long and can be easily included into any project, and contains the Pluralize() method along with a few other helpful methods (like Singularize(), Camelize(), Capitalize(), etc). The Inflector class is available in its entirety from my github repository https://github.com/srkirkland/Inflector.  In addition to the Inflector.cs class I added tests for every single method available so you can gain an understanding of what each method does.  Also, if you are wondering about a specific test case feel free to fork my project and add your own test cases to ensure Inflector does what you expect. Here is an example of some test cases for pluralize: TestData.Add("quiz", "quizzes"); TestData.Add("perspective", "perspectives"); TestData.Add("ox", "oxen"); TestData.Add("buffalo", "buffaloes"); TestData.Add("tomato", "tomatoes"); TestData.Add("dwarf", "dwarves"); TestData.Add("elf", "elves"); TestData.Add("mouse", "mice");   TestData.Add("octopus", "octopi"); TestData.Add("vertex", "vertices"); TestData.Add("matrix", "matrices");   TestData.Add("rice", "rice"); TestData.Add("shoe", "shoes"); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Pretty smart stuff.

  Read the article

• How can I solve http_port 3129 intercept with squid?

  - by wmoreno3

  My system: uname -a FreeBSD server.local.jmorenov.com.co 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 [email protected].buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 pkg info | grep squid squid-3.2.7 HTTP Caching Proxy I have this configuration in squid.conf: http_port 3128 accel vhost allow-direct # OK http_port 3129 intercept # Does not work icp_port 0 When I tried with: http_port 3129 intercept By switch line on ipnat.rules. In access log appears: 2013/01/09 00:46:03 kid1| IPF (IPFilter) NAT open failed: (13) Permission denied 2013/01/09 00:46:03 kid1| BUG #3329: Orphan Comm::Connection: local=127.0.0.1:3129 remote=192.168.1.129:51595 FD 24 flags=33 2013/01/09 00:46:03 kid1| NOTE: 1 Orphans since last started. /var/log/squid/cache.log 2013/02/08 09:02:33 kid1| Squid plugin modules loaded: 0 2013/02/08 09:02:33 kid1| Accepting reverse-proxy HTTP Socket connections at local=127.0.0.1:3128 remote=[::] FD 33 flags=9 2013/02/08 09:02:33 kid1| Accepting NAT intercepted HTTP Socket connections at local=127.0.0.1:3129 remote=[::] FD 34 flags=41 My /etc/ipnat.rules: root@server:/root # cat /etc/ipnat.rules # em0 = External NIC # bge0 = Internal NIC map em0 0/0 -> 0/32 proxy port ftp ftp/tcp map em0 0/0 -> 0/32 portmap tcp/udp auto map em0 0/0 -> 0/32 # Redirect direct web traffic to local web server. rdr em0 192.168.0.3/32 port 80 -> 127.0.0.1 port 80 tcp rdr bge0 192.168.1.3/32 port 80 -> 127.0.0.1 port 80 tcp # Redirect everything else to squid on port 3128 or 3129 intercept rdr em0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3128 tcp rdr bge0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3128 tcp #rdr em0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3129 tcp #rdr bge0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3129 tcp With 3128 is OK, but with 3129, Does not work, when switch in ipnat.rules.

  Read the article

• Win Server 2k and Win 7 client

  - by Ray Kruse

  I have a Win Server 2000 system with AD configured. The network consists of an OKI printer, a network server, a wifi router a Win 2k client and the server. I'm trying to connect a Win 7 client. The purpose of the network, besides sharing equipment is to move files from client to client and scatter backups over more than 1 machine. The Win 7 client is configured for DHCP and does in fact receive it's IP and DNS configuration from the server and it sees the printer, wifi router and network drive, but does not see the Win 2k client nor the Win 2k server. I have tried the LAN Management Authentication Level set to 'Send LM & NTLM responses' with the 128 bit encryption removed. I've also done the registry hack on the key 'LmCompatibilityLevel'. Neither of these have helped. I have two questions: Is there a fix or is Win 2k totally incompatible? Is the best (or quickest/cheapest) fix to upgrade the server to Win 2k3 and not worry about the Win 2k client? Thanks for any help. Ray Kruse Buffalo, KY

  Read the article

< Previous Page | 1 2 3  | Next Page >