Search Results

Search found 21 results on 1 pages for 'caleb cittadino'.

Page 1/1 | 1 

• How to boot Chromebook from SD card without entering developer mode?

  - by Caleb Strutz

  I have a question. Is it at all possible to install Ubuntu or Chrubuntu onto a SD Card and then boot a chromebook from said SD card? I know this is easily possible, but the chromebook in question belongs to my school, so I cannot enter developer mode, because that would void the license agreement. I don't really care how technical or how many steps this will take, as long as it can be possible. Thanks in advance.

  Read the article

• C++ OpenGL wireframe cube rendering blank

  - by caleb.breckon

  I'm just trying to draw a bunch of lines that make up a "cube". I can't for the life of me figure out why this is producing a black screen. The debugger does not break at any point. I'm sure it's a problem with my pointers, as I'm only decent at them in regular c++ and in OpenGL it gets even worse. const char* vertexSource = "#version 150\n" "in vec3 position;" "void main() {" " gl_Position = vec4(position, 1.0);" "}"; const char* fragmentSource = "#version 150\n" "out vec4 outColor;" "void main() {" " outColor = vec4(1.0, 1.0, 1.0, 1.0);" "}"; int main() { initializeGLFW(); // Initialize GLEW glewExperimental = GL_TRUE; glewInit(); // Create Vertex Array Object GLuint vao; glGenVertexArrays(1, &vao); glBindVertexArray(vao); // Create a Vertex Buffer Object and copy the vertex data to it GLuint vbo; glGenBuffers( 1, &vbo ); float vertices[] = { 1.0f, 1.0f, 1.0f, // Vertex 0 (X, Y, Z) -1.0f, 1.0f, 1.0f, // Vertex 1 (X, Y, Z) -1.0f, -1.0f, 1.0f, // Vertex 2 (X, Y, Z) 1.0f, -1.0f, 1.0f, // Vertex 3 (X, Y, Z) 1.0f, 1.0f, -1.0f, // Vertex 4 (X, Y, Z) -1.0f, 1.0f, -1.0f, // Vertex 5 (X, Y, Z) -1.0f, -1.0f, -1.0f, // Vertex 6 (X, Y, Z) 1.0f, -1.0f, -1.0f // Vertex 7 (X, Y, Z) }; GLuint indices[] = { 0, 1, 1, 2, 2, 3, 3, 0, 4, 5, 5, 6, 6, 7, 7, 4, 0, 4, 1, 5, 2, 6, 3, 7 }; glBindBuffer( GL_ARRAY_BUFFER, vbo ); glBufferData( GL_ARRAY_BUFFER, sizeof( vertices ), vertices, GL_STATIC_DRAW ); //glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, vbo); //glBufferData( GL_ELEMENT_ARRAY_BUFFER, sizeof( indices ), indices, GL_STATIC_DRAW ); // Create and compile the vertex shader GLuint vertexShader = glCreateShader( GL_VERTEX_SHADER ); glShaderSource( vertexShader, 1, &vertexSource, NULL ); glCompileShader( vertexShader ); // Create and compile the fragment shader GLuint fragmentShader = glCreateShader( GL_FRAGMENT_SHADER ); glShaderSource( fragmentShader, 1, &fragmentSource, NULL ); glCompileShader( fragmentShader ); // Link the vertex and fragment shader into a shader program GLuint shaderProgram = glCreateProgram(); glAttachShader( shaderProgram, vertexShader ); glAttachShader( shaderProgram, fragmentShader ); glBindFragDataLocation( shaderProgram, 0, "outColor" ); glLinkProgram (shaderProgram); glUseProgram( shaderProgram); // Specify the layout of the vertex data GLint posAttrib = glGetAttribLocation( shaderProgram, "position" ); glEnableVertexAttribArray( posAttrib ); glVertexAttribPointer( posAttrib, 3, GL_FLOAT, GL_FALSE, 0, 0 ); // Main loop while(glfwGetWindowParam(GLFW_OPENED)) { // Clear the screen to black glClearColor( 0.0f, 0.0f, 0.0f, 1.0f ); glClear( GL_COLOR_BUFFER_BIT ); // Draw lines from 2 vertices glDrawElements(GL_LINES, sizeof(indices), GL_UNSIGNED_INT, indices ); // Swap buffers glfwSwapBuffers(); } // Clean up glDeleteProgram( shaderProgram ); glDeleteShader( fragmentShader ); glDeleteShader( vertexShader ); //glDeleteBuffers( 1, &ebo ); glDeleteBuffers( 1, &vbo ); glDeleteVertexArrays( 1, &vao ); glfwTerminate(); exit( EXIT_SUCCESS ); }

  Read the article

• Why does Live-USB boot freeze at the moving dots?

  - by Caleb

  I am currently trying to boot into Ubuntu 12.04 x86 using a USB. I used Untetbootin to do all that boot crap and what not. But for some reason Ubuntu wont load pass that screen with the dots and the purple background. What happens is the dots all light up once, then they go back to white then they all light up at the same time and then it just gets stuck there. Ive even tried using an x64 copy (since my CPU supports it) but have no luck with that either. Ive even tried different DISTRIBUTIONS of Linux and all have failed with loading. Please help

  Read the article

• Flex AS3 - Creating a dynamic property, and then binding a control to it

  - by Caleb Cittadino

  I am trying to: 1) create a dynamic property 2) bind that property to a label This works great for "sealed properties", but for dynamic properties there doesn't appear to be any event triggered. Are dynamic properties implicityly not bindable? var myObj:MyType = new MyType(); // MyType is dynamic myObj["myDynamicPropertyName"] = "initialized"; BindingUtils.bindProperty(myLabel, "data", myObj, repeatedLabel.name); // myLabel now displays "initialized" myObj["myDynamicPropertyName"] = "changed"; // myLabel still displays "initialized", it should say "changed" !!!

  Read the article

• Configure spamassassin to mark very similar messages as spam

  - by Caleb Gray

  Users on my server have been receiving spam, consistently, for some time now. I have most of spamassassin's plugins enabled, and I have made sure to enable verbose logging, where I can see that all of the plugins are working. Why is it, then, that my users are able to receive the same exact junk mail several times in a day without the message being flagged in some way? Here are the relevant headers of an email that I personally have received several copies of: X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on sub.domain.tld X-Spam-Level: *** X-Spam-Status: No, score=3.0 required=4.0 tests=BAYES_50,FSL_HELO_NON_FQDN_1, HELO_NO_DOMAIN,HTML_MESSAGE,RCVD_IN_BRBL_LASTEXT,RDNS_NONE autolearn=no version=3.3.1 Have I accidentally missed the plugin that can see that I, and others, have received the same message multiple times in a short period of time?

  Read the article

• Size Mismatch Between Swing Fonts and Printable Fonts in Java

  - by Caleb Rackliffe

  Hi All, I've got a panel displaying a JTextPane backed by a StyledDocument. When I print a string of text in, say Arial 16, the text it prints is of a different size than the Arial 16 Word prints. Is there some sort of flaw in the translation of Swing fonts to Windows system fonts or something of the sort that makes it difficult (or impossible) to print accurately? I can achieve an approximation by scaling down the size of my font before printing, but this never quite gets me the results I would like, as it's not possible in all cases to reproduce things like equivalent numbers of words on a line, etc. Has anybody run into this before?

  Read the article

• Fading between images

  - by caleb

  How can i fade rotate between two images using jQuery? Say for example. <img src="image01.jpg" /> <img src="image02.jpg" /> I like the images to fade in/out between for say 2seconds each. Thanks! Much appreciated. :)

  Read the article

• Silverlight WCF service acting strange

  - by Caleb Sandfort

  Hi I have a silverlight project that calls into a wcf service. Everything works fine on my local machine. However when I deploy to a virtual machine, with the exact same query the wcf service returns, but the result is empty. I've tried debugging, but have not been able to get it to break in the wcf service. Any ideas what the problem could be, or how I could go about debugging it? Thanks I figured out what the problem is, but am not sure what the solution is. In my silverlight project the wcf service I am referencing is http://localhost/.../SilverlightApiService.svc I used fiddler on my vm to see the request that was made and instead of trying to contact the above service, it was trying to contact: http:///.../SilverlightApiService.svc So, for some reason my machine name is getting inserted in there instead of localhost. Any thoughts on this would be appreciated.

  Read the article

• jQuery tabs using radio buttons instead of list navigation

  - by caleb

  I'm following a tutorial to create a simple jquery tabs show/hide content. Wondering if there's a way to re-engineer it to use a list of radio buttons instead of a list? Tutorial here: http://www.sohtanaka.com/web-design/simple-tabs-w-css-jquery/ My js: $(".tab_content").hide(); //Hide all content $("ul.tabs li:first").addClass("active").show(); //Activate first tab $(".tab_content:first").show(); //Show first tab content //On Click Event $("ul.tabs li").click(function() { $("ul.tabs li").removeClass("active"); //Remove any "active" class $(this).addClass("active").children("input[@type=radio]").click(); //Add "active" class to selected tab $(".tab_content").hide(); //Hide all tab content var activeTab = "#" + $(this).children("input").attr("value"); //Find the href attribute value to identify the active tab + content $(activeTab).fadeIn(); //Fade in the active ID content return false; }); My HTML: <ul class="tabs"> <li><input type="radio" name="card" id="one" value="gallery" /> <label for="one">gallery</label></li> <li><input type="radio" name="card" id="two" value="submit" /> <label for="two">submit</label></li> <li><input type="radio" name="card" id="three" value="resources" /> <label for="three">resources</label></li> <li><input type="radio" name="card" id="four" value="contact" /> <label for="four">contact</label></li> </ul> <div class="tab_container"> <div id="gallery" class="tab_content"> <h2>Gallery</h2> </div> <div id="submit" class="tab_content"> <h2>Submit</h2> </div> <div id="resources" class="tab_content"> <h2>Resources</h2> </div> <div id="contact" class="tab_content"> <h2>Contact</h2> </div> </div> I'm able to actively select the radio button within the list, but not activate the actual div.

  Read the article

• Determining Odd Bottleneck with Rails/Unicorn/CentOS

  - by Caleb

  I have this odd bottleneck that I can't seem to put my finger on. My rails app randomly stalls which causes unicorn workers to restart. I can't seem to recreate it locally. My log shows odd things like this: Completed in 8892ms (View: 14, DB: 12) Ideas?

  Read the article

• Good alternative to .net DateTimePicker?

  - by Caleb

  I can't really explain why exactly, but I really hate the .net DateTimePicker control built into C#.net and VB.net. Is anyone aware of a good alternative to either of these controls which is freely available? I'm sure I'm not the only one who doesn't like the control. The date picker in Google Calendar is one which I really like, so I'd love something like that which I can use in a .net app.

  Read the article

• Content area not expanding with the content within it!

  - by Caleb

  I have been coding a design I had been working on for a week or so and have core across a snag. While doing the HTML/CSS of one of my right column modules the content within it expands however the bg and bordered area it is within does not. htttp://www.gamefriction.com/Coded/ (url with example) http://www.gamefriction.com/Coded/css/style.css (css stylesheet used on page) This website is purely HTML and CSS at this time all code can be viewed through the View Source option on all browsers. The area that is not working properly is the bullet links in the right module with the blue background that says "League Menu". The content above that will make the module background expand however the linked bullet menu will not.

  Read the article

• Listing time every second as a Bash script

  - by Caleb

  Hello all, first time here as I've finally started to learn programming. Anyway, I'm just trying to print the time in nanoseconds every second here, and I have this: #!/usr/bin/env bash while true; do date=(date +%N) ; echo $date ; sleep 1 ; done Now, that simply yields a string of date's, which isn't what I want. My learning has been rather messy, so I hope you'll excuse me for this if it's really simple. Also, I did manage to fine this, that worked on the prompt: while true ; do date +%N ; sleep 1 ; done But that obviously doesn't work as a script.

  Read the article

• If a Framework was a food [closed]

  - by Caleb

  Describe your best food analogies. I'll start: Drupal is like Jello. Looks pretty, tastes good, but has no nutritional value and you can't build anything out of jello blocks.

  Read the article

• Run a macro in all buffers in vim

  - by Caleb Huitt - cjhuitt

  I know about the :bufdo command, and was trying to combine it with a macro I had recorded (@a) to add a #include in the proper spot of each of the header files I'd loaded. However, I couldn't find an easy way to run the macro on each buffer. Is there a way to execute a macro through ex mode, which is what :bufdo requires? Or is there another command I'm missing?

  Read the article

• Electrified Light Saber Helps You Slay Bugs Like a Jedi [Video]

  - by Jason Fitzpatrick

  This fun little DIY project combines a toy light saber with the guts of an electrified fly-swatter to yield a bug slaying sword perfect for your epic battles against the Empire’s tiniest soldiers. Courtesy of Caleb over at Hack A Day, the build is surprisingly simple and quick to put together (if you’re handy with a screw driver and soldering iron). Check out the video above to see the build and the results or hit up the link below to read more about it. Building a Bug Zapping Light Saber [Hack A Day] How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

  Read the article

• Repurpose Old Phones As Intercoms

  - by Jason Fitzpatrick

  If you’ve got some old wired telephones laying around for want of a project, this simple hack turns two wired phones into an intercom. Over at Hack A Day, Caleb Kraft shares his simple phone hack inspired by his VW bus. He writes: In case you haven’t noticed from my many comments on the subject, I drive a VW bus. It is a 1976 Westfalia camper with sage green paint and green plaid upholstery. I absolutely love it and so does the rest of my family. We go for drives in the country as well as camping regularly. We have found that the kids have a hard time communicating with us while we’re going higher speeds. These things aren’t the quietest automobiles in the world. Pushing this bread loaf shaped hunk of steel down the road with an engine that might top out at 75hp results in wind noise, engine noise, and of course, vibration. I decided to employ a really old hack to put two functional telephones in the bus so my kids can talk to my wife (or whoever the passenger is) without screaming quite so loud. This hack is extremely easy, fairly cheap, and can be done in just a few minutes. The result is a functional intercom that you could use pretty much anywhere! For more pics of his setup (and a neat video of his rather retro ride), check out the link below. Hack Your Kindle for Easy Font Customization HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It

  Read the article

• Modded Portal Gun Levitates a Companion Cube [Video]

  - by Jason Fitzpatrick

  This cleverly designed Portal gun prop levitates a model Companion Cube; the whole setup just begs to be paired with a Halloween costume. Courtesy of Caleb over at Hack A Day: I was out to lunch with a couple friends, brainstorming ideas for fun projects when one of them says “Wouldn’t it be cool if we could build a working gravity gun?”. We all immediately concurred that while it would in fact be cool, it is also a silly proposition. However, only a few seconds later, I realized we could do a display piece that emulated this concept very easily. Floating magnetic globes have been around for quite some time. I determined I would tear the guts out of a stock floating globe and mount it on a portal gun, since they’re easier to find than a gravity gun. I would also build a custom companion cube to be the correct size and weight necessary. Watch the video above and then check out the link below for more information on the build. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• Where should you put constants and why?

  - by Tim Meyer

  In our mostly large applications, we usually have a only few locations for constants: One class for GUI and internal contstants (Tab Page titles, Group Box titles, calculation factors, enumerations) One class for database tables and columns (this part is generated code) plus readable names for them (manually assigned) One class for application messages (logging, message boxes etc) The constants are usually separated into different structs in those classes. In our C++ applications, the constants are only defined in the .h file and the values are assigned in the .cpp file. One of the advantages is that all strings etc are in one central place and everybody knows where to find them when something must be changed. This is especially something project managers seem to like as people come and go and this way everybody can change such trivial things without having to dig into the application's structure. Also, you can easily change the title of similar Group Boxes / Tab Pages etc at once. Another aspect is that you can just print that class and give it to a non-programmer who can check if the captions are intuitive, and if messages to the user are too detailed or too confusing etc. However, I see certain disadvantages: Every single class is tightly coupled to the constants classes Adding/Removing/Renaming/Moving a constant requires recompilation of at least 90% of the application (Note: Changing the value doesn't, at least for C++). In one of our C++ projects with 1500 classes, this means around 7 minutes of compilation time (using precompiled headers; without them it's around 50 minutes) plus around 10 minutes of linking against certain static libraries. Building a speed optimized release through the Visual Studio Compiler takes up to 3 hours. I don't know if the huge amount of class relations is the source but it might as well be. You get driven into temporarily hard-coding strings straight into code because you want to test something very quickly and don't want to wait 15 minutes just for that test (and probably every subsequent one). Everybody knows what happens to the "I will fix that later"-thoughts. Reusing a class in another project isn't always that easy (mainly due to other tight couplings, but the constants handling doesn't make it easier.) Where would you store constants like that? Also what arguments would you bring in order to convince your project manager that there are better concepts which also comply with the advantages listed above? Feel free to give a C++-specific or independent answer. PS: I know this question is kind of subjective but I honestly don't know of any better place than this site for this kind of question. Update on this project I have news on the compile time thing: Following Caleb's and gbjbaanb's posts, I split my constants file into several other files when I had time. I also eventually split my project into several libraries which was now possible much easier. Compiling this in release mode showed that the auto-generated file which contains the database definitions (table, column names and more - more than 8000 symbols) and builds up certain hashes caused the huge compile times in release mode. Deactivating MSVC's optimizer for the library which contains the DB constants now allowed us to reduce the total compile time of your Project (several applications) in release mode from up to 8 hours to less than one hour! We have yet to find out why MSVC has such a hard time optimizing these files, but for now this change relieves a lot of pressure as we no longer have to rely on nightly builds only. That fact - and other benefits, such as less tight coupling, better reuseability etc - also showed that spending time splitting up the "constants" wasn't such a bad idea after all ;-)

  Read the article

• Unexpected Blank lines in python output

  - by Martlark

  I have a bit of code that runs through a dictionary and outputs the values from it in a CSV format. Strangely I'm getting a couple of blank lines where all the output of all of the dictionary entries is blank. I've read the code and can't understand has anything except lines with commas can be output. The blank line should have values in it, so extra \n is not the cause. Can anyone advise why I'd be getting blank lines? Other times I run the missing line appears. Missing line: 6415, 6469, -4.60, clerical, 2, ,,,joe,030193027org,joelj,030155640dup Using python 2.6.5 Bit of code: tfile = file(path, 'w') tfile.write('Rec_ID_A, Rec_ID_B, Weight, Assigned, Run, By, On, Comment\n') rec_num_a = 0 while (rec_num_a <= max_rec_num_a): try: value = self.dict['DA'+str(rec_num_a)] except: value = [0,0,0,'rejected'] if (value[3]!='rejected'): weightValue = "%0.2f" % value[2] line = value[0][1:] + ', ' + value[1][1:] + ', ' + weightValue \ + ', ' + str(value[3]) + ', ' + str(value[4]) if (len(value)>5): line = line + ', ' + value[5] + ',' + value[6] + ',' + value[7] (a_pkey, b_pkey) = self.derive_pkeys(value) line = line + a_pkey + b_pkey tfile.write( line + '\n') rec_num_a +=1 Sample output 6388, 2187, 76.50, clerical, 1, ,,,cameron,030187639org,cameron,030187639org 6398, 2103, 70.79, clerical, 1, ,,,caleb,030189225org,caldb,030189225dup 6402, 2205, 1.64, clerical, 2, ,,,jenna,030190334org,cameron,020305169dup 6409, 7892, 79.09, clerical, 1, ,,,liam,030191863org,liam,030191863org 6416, 11519, 79.09, clerical, 1, ,,,thomas,030193156org,thomas,030193156org 6417, 8854, 6.10, clerical, 2, ,,,ruby,030193713org,mia,020160397org 6421, 2864, -0.84, clerical, 2, ,,,kristin,030194394org,connou,020023478dup 6423, 413, 75.63, clerical, 1, ,,,adrian,030194795org,adriah,030194795dup

  Read the article

• getaddrinfo appears to return different results between Windows and Ubuntu?

  - by MrDuk

  I have the following two sets of code: Windows #undef UNICODE #include <winsock2.h> #include <ws2tcpip.h> #include <stdio.h> // link with Ws2_32.lib #pragma comment (lib, "Ws2_32.lib") int __cdecl main(int argc, char **argv) { //----------------------------------------- // Declare and initialize variables WSADATA wsaData; int iResult; INT iRetval; DWORD dwRetval; argv[1] = "www.google.com"; argv[2] = "80"; int i = 1; struct addrinfo *result = NULL; struct addrinfo *ptr = NULL; struct addrinfo hints; struct sockaddr_in *sockaddr_ipv4; // struct sockaddr_in6 *sockaddr_ipv6; LPSOCKADDR sockaddr_ip; char ipstringbuffer[46]; DWORD ipbufferlength = 46; /* // Validate the parameters if (argc != 3) { printf("usage: %s <hostname> <servicename>\n", argv[0]); printf("getaddrinfo provides protocol-independent translation\n"); printf(" from an ANSI host name to an IP address\n"); printf("%s example usage\n", argv[0]); printf(" %s www.contoso.com 0\n", argv[0]); return 1; } */ // Initialize Winsock iResult = WSAStartup(MAKEWORD(2, 2), &wsaData); if (iResult != 0) { printf("WSAStartup failed: %d\n", iResult); return 1; } //-------------------------------- // Setup the hints address info structure // which is passed to the getaddrinfo() function ZeroMemory( &hints, sizeof(hints) ); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_STREAM; // hints.ai_protocol = IPPROTO_TCP; printf("Calling getaddrinfo with following parameters:\n"); printf("\tnodename = %s\n", argv[1]); printf("\tservname (or port) = %s\n\n", argv[2]); //-------------------------------- // Call getaddrinfo(). If the call succeeds, // the result variable will hold a linked list // of addrinfo structures containing response // information dwRetval = getaddrinfo(argv[1], argv[2], &hints, &result); if ( dwRetval != 0 ) { printf("getaddrinfo failed with error: %d\n", dwRetval); WSACleanup(); return 1; } printf("getaddrinfo returned success\n"); // Retrieve each address and print out the hex bytes for(ptr=result; ptr != NULL ;ptr=ptr->ai_next) { printf("getaddrinfo response %d\n", i++); printf("\tFlags: 0x%x\n", ptr->ai_flags); printf("\tFamily: "); switch (ptr->ai_family) { case AF_UNSPEC: printf("Unspecified\n"); break; case AF_INET: printf("AF_INET (IPv4)\n"); sockaddr_ipv4 = (struct sockaddr_in *) ptr->ai_addr; printf("\tIPv4 address %s\n", inet_ntoa(sockaddr_ipv4->sin_addr) ); break; case AF_INET6: printf("AF_INET6 (IPv6)\n"); // the InetNtop function is available on Windows Vista and later // sockaddr_ipv6 = (struct sockaddr_in6 *) ptr->ai_addr; // printf("\tIPv6 address %s\n", // InetNtop(AF_INET6, &sockaddr_ipv6->sin6_addr, ipstringbuffer, 46) ); // We use WSAAddressToString since it is supported on Windows XP and later sockaddr_ip = (LPSOCKADDR) ptr->ai_addr; // The buffer length is changed by each call to WSAAddresstoString // So we need to set it for each iteration through the loop for safety ipbufferlength = 46; iRetval = WSAAddressToString(sockaddr_ip, (DWORD) ptr->ai_addrlen, NULL, ipstringbuffer, &ipbufferlength ); if (iRetval) printf("WSAAddressToString failed with %u\n", WSAGetLastError() ); else printf("\tIPv6 address %s\n", ipstringbuffer); break; case AF_NETBIOS: printf("AF_NETBIOS (NetBIOS)\n"); break; default: printf("Other %ld\n", ptr->ai_family); break; } printf("\tSocket type: "); switch (ptr->ai_socktype) { case 0: printf("Unspecified\n"); break; case SOCK_STREAM: printf("SOCK_STREAM (stream)\n"); break; case SOCK_DGRAM: printf("SOCK_DGRAM (datagram) \n"); break; case SOCK_RAW: printf("SOCK_RAW (raw) \n"); break; case SOCK_RDM: printf("SOCK_RDM (reliable message datagram)\n"); break; case SOCK_SEQPACKET: printf("SOCK_SEQPACKET (pseudo-stream packet)\n"); break; default: printf("Other %ld\n", ptr->ai_socktype); break; } printf("\tProtocol: "); switch (ptr->ai_protocol) { case 0: printf("Unspecified\n"); break; case IPPROTO_TCP: printf("IPPROTO_TCP (TCP)\n"); break; case IPPROTO_UDP: printf("IPPROTO_UDP (UDP) \n"); break; default: printf("Other %ld\n", ptr->ai_protocol); break; } printf("\tLength of this sockaddr: %d\n", ptr->ai_addrlen); printf("\tCanonical name: %s\n", ptr->ai_canonname); } freeaddrinfo(result); WSACleanup(); return 0; } Ubuntu /* ** listener.c -- a datagram sockets "server" demo */ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <errno.h> #include <string.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #define MYPORT "4950" // the port users will be connecting to #define MAXBUFLEN 100 // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } int main(void) { int sockfd; struct addrinfo hints, *servinfo, *p; int rv; int numbytes; struct sockaddr_storage their_addr; char buf[MAXBUFLEN]; socklen_t addr_len; char s[INET6_ADDRSTRLEN]; memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; // set to AF_INET to force IPv4 hints.ai_socktype = SOCK_DGRAM; hints.ai_flags = AI_PASSIVE; // use my IP if ((rv = getaddrinfo(NULL, MYPORT, &hints, &servinfo)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(rv)); return 1; } // loop through all the results and bind to the first we can for(p = servinfo; p != NULL; p = p->ai_next) { if ((sockfd = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) == -1) { perror("listener: socket"); continue; } if (bind(sockfd, p->ai_addr, p->ai_addrlen) == -1) { close(sockfd); perror("listener: bind"); continue; } break; } if (p == NULL) { fprintf(stderr, "listener: failed to bind socket\n"); return 2; } freeaddrinfo(servinfo); printf("listener: waiting to recvfrom...\n"); addr_len = sizeof their_addr; if ((numbytes = recvfrom(sockfd, buf, MAXBUFLEN-1 , 0, (struct sockaddr *)&their_addr, &addr_len)) == -1) { perror("recvfrom"); exit(1); } printf("listener: got packet from %s\n", inet_ntop(their_addr.ss_family, get_in_addr((struct sockaddr *)&their_addr), s, sizeof s)); printf("listener: packet is %d bytes long\n", numbytes); buf[numbytes] = '\0'; printf("listener: packet contains \"%s\"\n", buf); close(sockfd); return 0; } When I attempt www.google.com, I don't get the ipv6 socket returned on Windows - why is this? Outputs: (ubuntu) caleb@ub1:~/Documents/dev/cs438/mp0/MP0$ ./a.out www.google.com IP addresses for www.google.com: IPv4: 74.125.228.115 IPv4: 74.125.228.116 IPv4: 74.125.228.112 IPv4: 74.125.228.113 IPv4: 74.125.228.114 IPv6: 2607:f8b0:4004:803::1010 Outputs: (win) Calling getaddrinfo with following parameters: nodename = www.google.com servname (or port) = 80 getaddrinfo returned success getaddrinfo response 1 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.114 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 2 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.115 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 3 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.116 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 4 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.112 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 5 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.113 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null)

  Read the article

1