Search Results

Search found 234 results on 10 pages for 'compaq'.

Page 1/10 | 1 2 3 4 5 6 7 8 9 10  | Next Page >

  • HP Compaq 2510p wireless disabled by hardware switch

    - by mylovelyhorse
    I have an HP Compaq 2510p laptop running ubuntu 12.04 LTS. ubuntu reports that wireless is disabled by means of a hardware switch. There is a 'soft-key' button on the laptop to control the physical wireless hardware but this does not respond. There is no other button, slider, (fn)+ combination to control the physical wireless hardware. There is no BIOS function to disable wireless (and on XP - previous OS - wireless functioned fine). mike@ubuntu:~$ rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no Running rfkill unblock all doesn't change things and I can see no way to change use from 0: to 1: (if that's even possible - or desirable - in the first place). I have checked for additional drivers and the Broadcom proprietary wireless driver is already installed and has a green light. Essentially, I believe I need to make the HP 'soft-keys' work - or at least the wireless card toggle. Advice gratefully received. Cheers M

    Read the article

  • Internal Mic Ubuntu 12.04 on Compaq Presario CQ50

    - by Genius FDE
    I have problem with the internal microphone not working on Ubuntu 12.04. It looks like a common problem on most of the laptops running ubuntu 12.04. I tried a lot of possible solutions available online but nothing seems to work! sudo aplay -l gives: **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 By the way, the Laptop has no HDMI port! I've seen the same problem with Sony laptop but the mic was working with too much static noise. Thank you.

    Read the article

  • Not able to change brightness on a Compaq Presario CQ61

    - by jinu
    Here is my result of lsmod Module Size Used by joydev 17393 0 vesafb 13516 1 snd_hda_codec_hdmi 31775 1 snd_hda_codec_idt 60251 1 snd_hda_intel 32765 3 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec nvidia 10958194 42 snd_seq_midi 13132 0 arc4 12473 2 snd_rawmidi 25424 1 snd_seq_midi ath9k 117425 0 snd_seq_midi_event 14475 1 snd_seq_midi mac80211 436455 1 ath9k bnep 17830 2 snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event uvcvideo 67203 0 rfcomm 38139 0 parport_pc 32114 0 ath9k_common 13781 1 ath9k snd_timer 28931 2 snd_pcm,snd_seq psmouse 87213 0 videodev 86588 1 uvcvideo snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq bluetooth 158438 8 bnep,rfcomm ppdev 12849 0 serio_raw 13027 0 ath9k_hw 391523 2 ath9k,ath9k_common ath 19387 3 ath9k,ath9k_common,ath9k_hw mac_hid 13077 0 binfmt_misc 17292 1 cfg80211 178679 3 ath9k,mac80211,ath snd 62064 16 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp r8169 56321 0 usbhid 41906 0 hid 77367 1 usbhid

    Read the article

  • COMPAQ Tower No Signal to monitor

    - by Lancelot
    Hi there, I have had some troubles with this: I received a compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. It was given to me on condition i give her the files back. My plan was to turn this into an Ubuntu Server. It booted up no problems even with the ubuntu live disc. After a normal shutdown(not unpluggin the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks etc. Thus i checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower now boots. It booted into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which i assure work perfectly but not with this tower(i recall it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since i am not using an external Video Card, this is onboard VGA. Thanks!

    Read the article

  • COMPAQ Tower No Signal to monitor

    - by Lancelot
    I received a Compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. My plan was to turn this into an Ubuntu Server. It booted up with no problems even with the Ubuntu live disc. After a normal shutdown (not unplugging the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks might be faulty, etc. Thus, I checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower was able to boot into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which I know work perfectly but not with this tower (I recall that it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since I am not using an external Video Card, this is onboard VGA.

    Read the article

  • Noisy compaq 610 laptop

    - by Dave
    Hi, I just bought a new compaq 610 laptop and the fan seems to be constantly on. I updated the bios and am using their recommended power settings. Am I missing something? Is there anything I can do to fix it?

    Read the article

  • Standard F* keys need holding Fn key on Compaq CQ62

    - by Chandru
    I got a Compaq CQ62 laptop recently. I find that I have to hold down the Fn keys to use the standard F* keys while accessing the special functionalities like media keys does not. This is frustrating as the standard keys are used more often the special functions. Is there anyway to fix it so that it behaves like other sane laptops out there? I use Ubuntu Lucid, but this behavior is present on laptops running Windows 7 too.

    Read the article

  • Standard F* keys need holding Fn key on Compaq CQ62

    - by Chandru
    I got a Compaq CQ62 laptop recently. I find that I have to hold down the Fn keys to use the standard F* keys while accessing the special functionalities like media keys does not. This is frustrating as the standard keys are used more often the special functions. Is there anyway to fix it so that it behaves like other sane laptops out there? I use Ubuntu Lucid, but this behavior is present on laptops running Windows 7 too.

    Read the article

  • Standard F* keys need holding Fn key on Compaq CQ62

    - by Chandru
    I got a Compaq CQ62 laptop recently. I find that I have to hold down the Fn keys to use the standard F* keys while accessing the special functionalities like media keys does not. This is frustrating as the standard keys are used more often the special functions. Is there anyway to fix it so that it behaves like other sane laptops out there? I use Ubuntu Lucid, but this behavior is present on laptops running Windows 7 too.

    Read the article

  • Compaq 610 fan is constantly on and noisy, base is fairly hot too

    - by Dave
    The fans on both of my HP Compaq 610s are constantly on and the base is fairly hot and I don't know if this is standard issue. HP assures me that this is unusual and that I should return them as DOA. Because both laptops have this problem, I'm thinking that this might be a design flaw rather than a one-off problem. I've updated the BIOS and using their recommended power settings. Am I missing something? Is there anything I can do to fix it?

    Read the article

  • Compaq Q2009 monitor display Issues

    - by jasonco
    I have this compaq q2009 monitor 20' inches and I am having display issues. When I turn on the computer the image is displayed fine for a fraction of a second and then the display goes black. If I turn off the monitor and turn it on again the the same thing happens: the image is displayed for a fraction of a second and then goes black. This is odd. I've looked all over the web and I haven't found anything useful (not even in the HP website). So there is no "out of range" or "recommended resolution" message. It just displays and then goes black. I think the resolution is fine because it was working OK until recently and I haven't changed anything in that regard. Any help would be appreciated. Thanks.

    Read the article

  • Compaq Presario V2000 Vista/7 trial virtualization

    - by James Schweninger
    I am currently studying for an A-Plus certification to which was recently added troubleshooting Windows 7 to the exam. You also have to be very familiar with Vista as well. I only have XP on my Compaq Presario V2000, but I wanted to set it up ( I believe I have the minimum requirements for both ) so that I could run trial versions of Vista and 7 virtually.Windows 2000 is also on the exam. Is there an easy legal way to do this? I wouldn't mind partitioning my HDD for the four operating systems either. Thnx if you have any ideas, JLS

    Read the article

  • Compaq motherboard CQ60 AMD - nvidia chipsed graphic problem

    - by Dritan
    Hi! It nice to have read that you solved this problem this way. I have 2 laptops Compaq CQ60 AMD Athlon with Nvidia graphic cards. the first one is new, when i press power button, it lights up only the ON led in front and nothing else, no fan working, blank screen, no beep.. I don't know what may be the problem. When I put on power adaptor, it lights up only the side power led near dhe power adapter plug but it doesn't light up the front led one. the second one have this problem that it spins the fan, light power and On led, but it doesn't show nothing on the screen blank (even with external monitor). In this case it maybe this problem of the Nvida Graphic Chip and it may need a reflow. I have an hot air station, but I don't know if I should try this or the oven one. Please can you give me any suggestion what to do to solve this. I have read that the solution of the Oven method is just temporary,maximum of three months, do you have the same experience about this? Any suggestion is wellcome.

    Read the article

  • Compaq Motherboard gives "CPU Fan Error"

    - by John
    I have a motherboard for a HP business desktop dx5150 PC. The model written on the board is "MS-7050" and it is for an AMD socket 939 processor. I got everything installed in it, and when I turned it on, it showed a message stating that there was a "CPU Fan Error" (or some similar language) and then turned off. It never stays on for more than about 30 seconds, probably less. The fan had previously been working great, but I replaced it anyway with a brand new Cooler Master fan. This did not work. I then reset the BIOS with the jumpers on the board, no dice. I replaced the CMOS battery. Same error. I then replaced the entire computer power supply with a brand new Antec, same error. The fan header is keyed, and has room for 3 pins. The CPU fan is designed the same way, so its not that I'm missing a temperature sensor or anything. Can anyone give some suggestions? Especially maybe some secret keystrokes to bypass this error?

    Read the article

  • Does anyone own a compaq 610? Fan Issues.

    - by Dave
    Hi, I've just purchased 2 HP compaq 610s and both have the same problem, that the fan is constantly on and the base is fairly hot. HP assures me that this is unusual and that I should return them as DOA. Becasue both laptops have this issue, I think that it may be a design flaw rather than a one off problem. Can any 610 owners comment? Is their fan constantly on too?

    Read the article

  • How to enable wireless on my hp compaq nx6110 laptop

    - by victor
    My laptop is an old HP Compaq NX6110. The wireless switch is not working, and I can`t also enable wireless from connexion manager. I connected to to the Internet with Ubuntu using wired LAN, and I downloaded windows wireless drivers, Wi-Fi radar application, and additional drivers. I also updated to Ubuntu 11.10 but still no luck. I guess I need some terminal commands. Any ideas are welcome. Thank you for the attention victor.

    Read the article

  • How to boot Ubuntu 12.04-64bit from a USB from Compaq CQ58

    - by user208092
    I try to boot Ubuntu 12.04, 64-bit on my Compaq CQ58 laptop from a USB but it is not working. I've correctly installed the Ubuntu on my pen drive following the instructions on Ubuntu website. (http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows) These are my BIOS settings: Post Hotkey Delay (sec) <0 CD-ROM Boot Internal Network Adapter Boot Network Boot Protocol Legacy Support Secure Boot Platform Key Enrolled Pending Action None Clear All Secure Boot UEFI Boot Order: USB Diskette on Key/USB Hard Disk OS Boot Manager Internal CD/DVD ROM Drive ! Network Adapter With these settings when i restart my computer what shows up is: Boot Device Not Found. This is what I get on the Boot Manager: Boot Option Menu OS boot Manager Boot From EFI File (Arrow Up) and (Arrow Down) to change option, ENTER to select an option. Press F10 to BIOS Setup Options, ESC to exit. PLEASE HELP... P.S. My laptop has windows 8

    Read the article

  • Compaq Presario R3000 randomly fails to boot on 11.10, 12.04, 12.10

    - by dlfuller
    I’m trying to figure what to do with random failures to boot. My old HP Presario R3000 with AMD Athlon XP-M sometimes boots, sometimes hangs with a blank screen during boot, and sometimes hangs on shutdown. After a few boot attempts it will finally boot to the GNU GRUB screen where I usually can select Recovery Mode, then select return to a normal boot, and the thing will startup and function normally. The pattern is not repeatable and seemed to start after upgrading from 11.04. Clean installs of 12.04 and 12.10 on newly-formatted hard drives make no difference. If this might be a clue, hangs on shutdown often stop at a line with: “pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff”. I did try the “acpi=off” modification from 11.10 randomly fails to boot on Compaq Presario R3000 with no change in these random boot failures. Any suggestions sure appreciated.

    Read the article

  • Ubuntu running like mud, system hangs and looks like its running at 3FPS

    - by user240803
    the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

    Read the article

  • WiFi is not detecting in compaq presario c700

    - by charan
    Hi I have a Compaq Presario c700 laptop,I just installed Ubuntu 10.04 in my laptop. My wireless networks are not showing in network manager. charan@charan-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) 01:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 02) 02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)

    Read the article

  • how to get wireless to work on my HP Compaq nx6325 Notebook on 12.04

    - by user211487
    When my laptop ran XP, the wireless worked perfectly. Now the only way I get internet is having it wired in my living room - which is MASSIVELY inconvenient for me seeing as my room is outside. I have downloaded the driver from 'Additional Drivers', reset my computer (with difficulty, it also doesn't seem to like turning off, so I have to 'kill' it) and still nothing! I have looked all over the internet trying to find solutions but I just cant seem to get it to work. I have a USB wireless stick but I can't load the driver from the CD. I got this comment on a previous question: "Using either Snaptic Package Manager or Ubuntu's own Software Centre, remove "bcmwl-kernel-source" if it's already installed. Next, search for "firmware-b43-installer” and “b43-fwcutter” and install both. Finally, running Software Sources and checking the Additional Drivers tab you should find Broadcom STA Wireless Driver that you can select, install and on reboot hopefully have wireless working ok..." Which I replied: "Right, so I tried to find/remove "bcmwl-kernel-source" but couldn't find anything. I managed to install both "firmware-b43-installer” and “b43-fwcutter” using terminal, after finding out how it worked. And lastly, I couldn't figure out how to find 'Broadcom STA Wireless Driver' - still no more additional drivers. And my wireless is still not working. My laptop has a button that turns wifi on and off and since I put Ubuntu on it, it hasn't worked. And also, my computer still doesn't seem to restart properly - it just gets stuck on the ubuntu loading screen." - hope that helps, somewhat I am VERY new to Linux, not very technical and in need of help! -Running Ubuntu 12.04 32bit on a HP Compaq nx6325 Notebook Thank you to anyone who replies, its much appreciated

    Read the article

  • Laptop Battery problem

    - by sudhin
    My Compaq Presario CQ42 laptop battery is not working well with Ubuntu 12.04. But there is no problem in Ubuntu 10.04. Sometimes it shows percentage, sometimes remaining time, but charge reduces suddenly if I close the lid. The battery's charge reduces as follows: 100% charged battery after two minutes shows 1hr:30min remaining then after 2 minutes time remaining is 1hr:24min after 10mins if i just close lid and opened then shows 64% remaining ..... How can I solve this problem?

    Read the article

  • Ubuntu 12.04, web cam light flashing

    - by user205877
    Have been running Ubuntu on my Compaq C757 reliably since 9.10. Currently running a fresh install of 12.04 LTS. Somewhere during my regular updates, my webcam started flashing its power light. Light flashes from logon screen all throughout my session. I am not running Google Chrome but chromium and firefox. Webcam works normally whenever I run Cheese webcam booth, light comes on solid and webcam works normally. I close out of Cheese, webcam shuts off, and then the light starts blinking again. My system is dual boot, when I boot into Windows 7, webcam does not exhibit this problem. I suspect issue may be related to new laptop power management settings in kernel based on research on the web of similar problems, but I do not know how to instruct it to treat webcam differently.

    Read the article

  • Ubuntu runs really slow on netbook

    - by Tim
    so I installed Ubuntu through Wubi in my netbook (Compaq Mini, 1.6 GHZ Atom, 1 GB RAM, 250 HDD, Windows 7 Starter) and decided to keep the original OS and run both... The thing is that, after I installed Ubuntu (really hyped: a couple of friends told me this OS was amazing, much faster and eaiser to use than Windows) and selecting it from the boot menu, I find that it runs really slow, sometimes freezing for a sec... For what I know, there must me be a partition in C:/ and a lot of HDD space for the Installation Size to make things faster, but I am sure I got those things right... Any help?? Also, why doesn't Wubi ask you for the DVD or bootable USB drive?? I'm just new in all this guys...

    Read the article

1 2 3 4 5 6 7 8 9 10  | Next Page >