Search Results

Search found 3397 results on 136 pages for 'conference room'.

Page 1/136 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Cooling for a small server room

    - by John Zwinck
    I have a server room about 12 feet square with an unfinished ceiling (exposed ducts and wiring). It houses a few servers (about ten, 1U and 2U) and some networking gear (four 1U switches, three routers, three modems, two cable boxes). With the door closed, it runs around 80 degrees Fahrenheit with half the servers turned on. When I turned on all the servers it reached 86 before I chickened out and propped the door open. The room is adjacent to air-conditioned office space, but does not itself have dedicated air conditioning. The ventilation for this room seems to be limited to one duct coming in at ceiling level, with a powered fan to draw air in, and one duct at ceiling level to allow air to flow out (it seems like it may just go into the drop ceiling cavity in the adjacent room). The adjacent office space stays fairly cool, but I'd prefer not to leave the door propped open all the time. There is both 110v and 208v service in the room, and plenty of power available. But there are no windows, and no floor drains (in a pinch we might be able to run a condensation hose through a small hole we'd drill in the wall to a nearby sink area, but only if absolutely necessary). I've considered portable A/C units, but I'm not sure on sizing and a lot less sure how we would run the exhaust hose(s). I suppose we could point one at the existing room exhaust duct (air return), but substantially modifying the duct is probably a no-no. I've also considered installing a fan box in the door of the room, but I'm concerned that this will only drop the temperature a little. Even right now, with all the equipment on, the room is at 83 degrees with the door open. And the main building A/C turns off daily at 6 PM to conserve energy, so the adjacent room temperature rises at night. How would you cool this room? Let's say the goal is to bring the temperature with everything running from a steady state of around 90 degrees down to 75 (equivalently, to offset the heat produced by ten 1U servers).

    Read the article

  • Annual SQL Server conference in Poland - SQLDay 2014

    - by Damian
    We had a great 3-days conference this year in Poland. The SQLDay (7th edition) is an annual community conference. We started in 2008 as a part of C2C (community to communities) conference and after that, from 2009 the SQLDay is the independent event dedicated to the SQL Server specialists. This year we had almost 300 people and speakers like Bob Ward, Klaus Aschenbrenner and Alberto Ferrari. Of course there were also many local Polish leaders (MVP's and an MCM :) )If you are curious how we played in Wroclaw this year - just visit the link http://goo.gl/cgNzDl (or try that one https://plus.google.com/photos/100738200012412193487/albums/6010410545898180113?authkey=CITqmqmkrKK8Tw) Visit the conference site: http://conference.plssug.org.pl/ 

    Read the article

  • Server Room Protocols/Server Room Management

    - by Matthew E
    Hi, I'm new to this site but have found the articles and feedback very useful. We have a Server Room which our Organisation owns and controls, yet there are several thirs party companies that have open access to this room. As such, we have been asked to put together a protocol paper that stipulates the standards that we expect to be adhered to when working in this room. Other than the monitoring of UPS loads, Air Cooling functionality, alarm systems etc, does any one have any guidance on the kind of issues that need to be documented to make this protocol all encompassing? I'm thinking along the lines of not leaving cardboard or other combustibles in the room, not having food and drink in the room, not altering the fabric of the building by drilling through walls etc? Many thanks in advance for any guidance provided.

    Read the article

  • Data Governance 2010 Conference in San Diego

    - by Tony Ouk
    The Data Governance Annual Conference is one of the world's most authoritative and vendor neutral event on Data Governance and Data Quality.  The conference will focus on the "how-tos" from starting a data governance and stewardship program to attaining data governance maturity with specific topics on MDM.  This year's event will be hosted June 7 through June 10 in San Diego, California. For more information, including registration details, visit the Data Governance 2010 Conference website.

    Read the article

  • Speaking at Dog Food Conference 2013

    - by Brian T. Jackett
    Originally posted on: http://geekswithblogs.net/bjackett/archive/2013/10/22/speaking-at-dog-food-conference-2013.aspx    It has been a couple years since I last attended / spoke at Dog Food Conference, but on Nov 21-22, 2013 I’ll be speaking at Dog Food Conference 2013 here in Columbus, OH.  For those of you confused by the name of the conference (no it’s not about dog food), read up on the concept of dogfooding .  This conference has a history of great sessions from local and regional speakers and I look forward to being a part of it once again.  Registration is now open (registration link) and is expected to sell out quickly.  Reserve your spot today.   Title: The Evolution of Social in SharePoint Audience and Level: IT Pro / Architect, Intermediate Abstract: Activities, newsfeed, community sites, following... these are just some of the big changes introduced to the social experience in SharePoint 2013. This class will discuss the evolution of the social components since SharePoint 2010, the architecture (distributed cache, microfeed, etc.) that supports the social experience, Yammer integration, and proper planning considerations when deploying social capabilities (personal sites, SkyDrive Pro and distributed cache). This session will include demos of the social newsfeed, community sites, and mentions. Attendees should have an intermediate knowledge of SharePoint 2010 or 2013 administration.         -Frog Out

    Read the article

  • Conference Calling Meetme.conf PROBLEM - Astarisk

    - by Zafer
    I am facing problem in conference calling (OS ubuntu latest) ... I created a conference Room and an extension no .. when i dial from my softphone (3cx or X-Lite) it says "YOU ARE ENTERING CONFERENCE NO 1234. YOU ARE CURRENTLY THE ONLY PERSON IN THE CONFERENCE) and then a music for a second and then shows connected... Now when i dial form another soft phone the same extension it goes to second conference room and plays the same message .. if i create only one conference room .. the second no. didn't connect to it and says no conference room. CAN some one help me out .... I just want to create a conference room OR extension where 4-5 or 6 people can call and make a conference ... i am not very much expert in linux and asterisk so simple steps to achieve my goal .. Thanks

    Read the article

  • Domino 8.5.3 forward room reservation request to external email

    - by Cividan
    I have created a room reservation database on my notes server. Now my problem is that we have 2 company that will use this room and I would like to forward the meeting request sent to this room to external email address so that the other company email server receive the reservation request and update the calendar on their side to see the accurate availability of the room. How can I achive this. Thanks !

    Read the article

  • Monitoring server room temperature

    - by user640
    I have a small server room with its own AC unit. Recently, the AC died, and the temperature increased from 70 F to 90 F. We rarely go in this room, so I was lucky that someone happened to notice that the fans were running a lot louder than normal as they walked past the door. It looks like I need a way to be notified when the temperature in that room gets too hot. What tools are you using to monitor the temperature in your server room? How does this tool notify you of a problem (email, SNMP, etc). Note: I've read this question on server temperature, but I'm interested in the whole room, not just the inside of a server case. Edit: Thanks for all the great responses so far! Many of these products measure much more than just temperature. What else should I be looking at and why?

    Read the article

  • The Future of Life Assurance Conference Recap

    - by [email protected]
    I recently wrote about the Life Insurance Conference held in Washington, DC last month. This week I was both an attendee and guest speaker the 13th Annual Future of Life Assurance Conference held at The Guoman Tower in London, UK. It's amazing that these two conferences were held on opposition sides of the Atlantic Ocean and addressed many of the same session topics and themes. Insurance is certainly a global industry! This year's conference was attended by many of the leading carriers and CEOs in the UK and across Europe.The sessions included a strong lineup of keynote speakers and panel discussions from carriers such as Legal & General, Skandia, Aviva, Standard Life, Friends Provident, LV=, Zurich UK, Barclays and Scottish Life. Sessions topics addressed a variety of business and regulatory issues including: Ensuring a profitable future Key priorities in regulation The future of advice The impact of the RDR on distribution Bancassurance Gaining control of the customer relationship Revitalizing product offerings In addition, Oracle speakers (Glenn Lottering and myself) led specific sessions on gearing up for Solvency II and speeding product development through adaptive rules-based systems. The main themes that played throughout many of the sessions included: change is here, focusing on customers, the current economic crisis has been challenging and the industry needs to get back to the basics and simplify - simplify - simplify. Additionally, it is clear that the UK Life & Pension markets will be going through some major changes as new RDR regulation related to advisor fees and commission and automatic enrollment are rolled out in 2012 Roger A.Soppe, CLU, LUTCF, is the Senior Director of Insurance Strategy, Oracle Insurance.

    Read the article

  • A dusty server room

    - by pauska
    Here's the story.. The owners of the building we lease office space from decided to do a renovation of the exterior. This involved in some pretty heavy work at the level where our server room is, including exchanging windows wich are fit inside a concrete wall. My red alert went off when I heard that they were going to do the same thing with our server room (yes, our server room has a window. We're a small shop with 3 racks. The window is secured with steel bars.) I explicity told the contractor that they need to put up a temporarily wall between our racks and the original wall - and to make sure that the temporary wall is 100 % air and water-tight. They promised to do so. The temporary wall has a small door in it, so that workers can go in/out through the day (through our server room, wich was the only option....). On several occasions I could find the small door half-way shut while working evenings/nights. I locked the door, and thought that they would hopefully get the point soon and keep the door shut. I even gave a electrician a mouthful when I saw that he didn't close the door properly. By this point - I bet that most of you get a picture of what happened. Yes, they probably left the door open while drilling in the concrete. I present you our 4 weeks old EMC VNX: I'll even put in a little bonus, here is the APC UPS one rack further away from the temporary wall. See the nice little landing strip from my finger? What should I do? The only thing that comes to mind is to either call all our suppliers (EMC, HP, Dell, Cisco) and get them to send technicians to check out all the gear in the server room, or get some kind of certified 3rd-party consulant to check all of it. Would you run production systems on this gear? How long? Edit: I should also note that our aircondition isn't exactly enterprise-grade, given the nature of our small room. It's just a single inverter, wich have failed one time before I started working here (failed inverters usually leads to water dripping out).

    Read the article

  • Moving server room to another part of the building

    - by PHLiGHT
    This question is a bit different than the typical we are moving our server room to an off site location or we are moving the whole office to a new building. Management wants to add some more office space and to do so they want to move the server room to another location. The server room has Verizon smart jacks, a few servers, PBX and all the office network drops go into this room. I'm going to go over there to scout out an alternate location for the equipment because that is still TBD. This sounds like quite a pain since the Verizon equipment for our MPLS will need to be moved (never done that) and the office jacks will need to be re-run. How do you handle the jacks? I was thinking of keeping them in the same location and having new wall plates put in with half the ports going to the current location and the other half to the new location. Or do you think that 40 drops could just be done over the weekend so the old stuff would be ripped out and replaced with the new? Currently the wiring is a mess so this could be a blessing in the long run.

    Read the article

  • Catch AutoVue at the COE 2010 PLM Conference

    - by [email protected]
    It's a busy tradeshow season! The AutoVue team will be exhibiting at next week's COE 2010 PLM Conference and Technifair in Las Vegas, NV. This will be a unique opportunity to meet with AutoVue visualization experts and discuss how to leverage visualization throughout your engineering organization to capitalize on product and engineering information to improve business processes, such as design reviews, change management and design revisions. If you plan on attending, be sure to stop by Oracle's AutoVue booth (#508). Click here for more details about the show.

    Read the article

  • The perfect server room?

    - by splattne
    What do I have to consider when I'm planning a new server room for a small company (30 PCs, 5 servers, a couple of switches, routers, UPS...)? What are the most important aspects in order to protect the hardware? What things do not belong in a server closet? Edit: You may also be interested in this question: Server Room Survival Kit. Thank you!

    Read the article

  • Watch Google’s I/O 2012 Developer Conference Live (Online) Starting June 27

    - by Asian Angel
    Google’s annual I/O conference begins on Wednesday this week and will be filled with exciting sessions about Android, Chrome, Google+, and more. To help you keep up with all the fun we have the links you need so that you can tune in with live streaming! Photo courtesy of Google I/O website. The keynote for Day 1 will begin at 9:30 a.m. PDT (U.S. time) and the keynote for the second day will begin at 10:00 a.m. PDT (U.S. time), so make sure to mark it on your schedule! Visit the blog post linked below for more details about signing up for Extended Events, the I/O mobile app, the liveblogging gadget, and more. SPECIAL NOTE: The Google blog post linked below was slightly ambiguous and listed both of the I/O URLs we have shown here, so make sure to keep a watch on both… How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

    Read the article

  • Another Marketing Conference, part two – the afternoon

    - by Roger Hart
    In my previous post, I’ve covered the morning sessions at AMC2012. Here’s the rest of the write-up. I’ve skipped Charles Nixon’s session which was a blend of funky futurism and professional development advice, but you can see his slides here. I’ve also skipped the Google presentation, as it was a little thin on insight. 6 – Brand ambassadors: Getting universal buy in across the organisation, Vanessa Northam Slides are here This was the strongest enforcement of the idea that brand and campaign values need to be delivered throughout the organization if they’re going to work. Vanessa runs internal communications at e-on, and shared her experience of using internal comms to align an organization and thereby get the most out of a campaign. She views the purpose of internal comms as: “…to help leaders, to communicate the purpose and future of an organization, and support change.” This (and culture) primes front line staff, which creates customer experience and spreads brand. You ensure a whole organization knows what’s going on with both internal and external comms. If everybody is aligned and informed, if everybody can clearly articulate your brand and campaign goals, then you can turn everybody into an advocate. Alignment is a powerful tool for delivering a consistent experience and message. The pathological counter example is the one in which a marketing message goes out, which creates inbound customer contacts that front line contact staff haven’t been briefed to handle. The NatWest campaign was again mentioned in this context. The good example was e-on’s cheaper tariff campaign. Building a groundswell of internal excitement, and even running an internal launch meant everyone could contribute to a good customer experience. They found that meter readers were excited – not a group they’d considered as obvious in providing customer experience. But they were a group that has a lot of face-to-face contact with customers, and often were asked questions they may not have been briefed to answer. Being able to communicate a simple new message made it easier for them, and also let them become a sales and marketing asset to the organization. 7 – Goodbye Internet, Hello Outernet: the rise and rise of augmented reality, Matt Mills I wasn’t going to write this up, because it was essentially a sales demo for Aurasma. But the technology does merit some discussion. Basically, it replaces QR codes with visual recognition, and provides a simple-looking back end for attaching content. It’s quite sexy. But here’s my beef with it: QR codes had a clear visual language – when you saw one you knew what it was and what to do with it. They were clunky, but they had the “getting started” problem solved out of the box once you knew what you were looking at. However, they fail because QR code reading isn’t native to the platform. You needed an app, which meant you needed to know to download one. Consequentially, you can’t use QR codes with and ubiquity, or depend on them. This means marketers, content providers, etc, never pushed them, and they remained and awkward oddity, a minority sport. Aurasma half solves problem two, and re-introduces problem one, making it potentially half as useful as a QR code. It’s free, and you can apparently build it into your own apps. Add to that the likelihood of it becoming native to the platform if it takes off, and it may have legs. I guess we’ll see. 8 – We all need to code, Helen Mayor Great title – good point. If there was anybody in the room who didn’t at least know basic HTML, and if Helen’s presentation inspired them to learn, that’s fantastic. However, this was a half hour sales pitch for a basic coding training course. Beyond advocating coding skills it contained no useful content. Marketers may also like to consider some of these resources if they’re looking to learn code: Code Academy – free interactive tutorials Treehouse – learn web design, web dev, or app dev WebPlatform.org – tutorials and documentation for web tech  11 – Understanding our inner creativity, Margaret Boden This session was the most theoretical and probably least actionable of the day. It also held my attention utterly. Margaret spoke fluently, fascinatingly, without slides, on the subject of types of creativity and how they work. It was splendid. Yes, it raised a wry smile whenever she spoke of “the content of advertisements” and gave an example from 1970s TV ads, but even without the attempt to meet the conference’s theme this would have been thoroughly engaging. There are, Margaret suggested, three types of creativity: Combinatorial creativity The most common form, and consisting of synthesising ideas from existing and familiar concepts and tropes. Exploratory creativity Less common, this involves exploring the limits and quirks of a particular constraint or style. Transformational creativity This is uncommon, and arises from finding a way to do something that the existing rules would hold to be impossible. In essence, this involves breaking one of the constraints that exploratory creativity is composed from. Combinatorial creativity, she suggested, is particularly important for attaching favourable ideas to existing things. As such is it probably worth developing for marketing. Exploratory creativity may then come into play in something like developing and optimising an idea or campaign that now has momentum. Transformational creativity exists at the edges of this exploration. She suggested that products may often be transformational, but that marketing seemed unlikely to in her experience. This made me wonder about Listerine. Crucially, transformational creativity is characterised by there being some element of continuity with the strictures of previous thinking. Once it has happened, there may be  move from a revolutionary instance into an explored style. Again, from a marketing perspective, this seems to chime well with the thinking in Youngme Moon’s book: Different Talking about the birth of Modernism is visual art, Margaret pointed out that transformational creativity has historically risked a backlash, demanding what is essentially an education of the market. This is best accomplished by referring back to the continuities with the past in order to make the new familiar. Thoughts The afternoon is harder to sum up than the morning. It felt less concrete, and was troubled by a short run of poor presentations in the middle. Mainly, I found myself wrestling with the internal comms issue. It’s one of those things that seems astonishingly obvious in hindsight, but any campaign – particularly any large one – is doomed if the people involved can’t believe in it. We’ve run things here that haven’t gone so well, of course we have; who hasn’t? I’m not going to air any laundry, but people not being informed (much less aligned) feels like a common factor. It’s tough though. Managing and anticipating information needs across an organization of any size can’t be easy. Even the simple things like ensuring sales and support departments know what’s in a product release, and what messages go with it are easy to botch. The thing I like about framing this as a brand and campaign advocacy problem is that it makes it likely to get addressed. Better is always sexier than less-worse. Any technical communicator who’s ever felt crowded out by a content strategist or marketing copywriter  knows this – increasing revenue gets a seat at the table far more readily than reducing support costs, even if the financial impact is identical. So that’s it from AMC. The big thought-provokers were social buying behaviour and eliciting behaviour change, and the value of internal communications in ensuring successful campaigns and continuity of customer experience. I’ll be chewing over that for a while, and I’d definitely return next year.      

    Read the article

  • A simple message room

    - by webbyJoe
    Can anyone recommend a simple message room (not chat room) which I can use for a private communication between my users. My idea: to grant some users (2-3 at the most) a specific privilege to talk privately in a message room. none of them would be administrator there. I need such features: - admin panel for adding users allowed to post messages in room - room invisible to anyone except users - filtering not-allowed words - Ajax-enabled so that replies appear immediately - other message room features I have a linux hosting so PHP message room would be the best option. I thought of using a forum for this, but it's too much work as a forum is public by nature and I need something private by nature. Any ideas? Thanks in advance.

    Read the article

  • Bringing people into an Asterisk conference call

    - by Harley
    I'm using Asterisk 1.4 and am trying to work out a way to bring people into a conference call. In the ideal scenario two people would be talking and one of them would push some keys, then a phone number and then the three of them would be in a conference. From there they should be able to bring in other people as well. This seems to be what the Asterisk n-way call HOWTO is trying to do, but it doesn't work quite properly for me. Here's what happens: 1. Internal person A calls person B 2. Person A presses *0, he is given a dial tone and person B is taken to a conference room 3. Person A calls person C and they can talk, and then person A presses **. 4. Person C is brought to the conference room, but person A is disconnected. In the last step, A should be taken to the conference room as well. Here's the relevant logs, where 230 is person A, 231 is person B, 207 is person C, and 282 is the conference room.

    Read the article

  • Portable server room air-con options

    - by Bridgette
    We are looking for portable industrial aircond for our server room which whould blow hot air to the sealing cavity, split-system is not an option (http://www.ikoo.com.au/Aircond.png). Something exactly like this would be ideal, but unfortunately not available in AUS: http://www.apc.com/resource/include/techspec_index.cfm?base_sku=ACPA4000&ISOCountrycode=us http://www.apcmedia.com/salestools/ASTE-6Z2RUU_R1_EN.pdf. So we pretty much looking for competing products to the APC's NetworkAIR PA4000 available in AU. ? We currently have 3 x DeLonghi Penguino PACT120, but space is limited and getting more of these is prob not ideal.

    Read the article

  • Server room kit?

    - by Bill Weiss
    I feel like this is a question I've seen on here before, but some searching didn't do me any good. This looks similar, but I'm looking for stuff I leave there, not what's in my go-bag. What would you say is indispensable equipment in your server room? I've inherited one that's a bit light on stuff (except for servers, those are in there). We're in the single digits of racks, if that matters. I'm thinking of things like: Cable labeler Ethernet tester (copper at least, fibre if you need) ... ? Community wiki, because, really. [Edit] I suppose it's important to say that it's a colo facility, kind of far from the office. No food, water, etc. :(

    Read the article

  • Best labeler for the server room?

    - by Matt Simmons
    Right now, I've got a Brother P-touch labeler that prints four or five sizes of text on one long label. It has features such as italics and bold. It's...non-ideal. What do you use in your server room? I have heard of labelers that will print vertically as well as horizontally, or which can produce labels for cable management as well. I also think it would be great to be able to produce barcodes for my tapes (LTO-3). So basically, I would like a labeler that prints normal, can print cable labels, and can print barcodes. Unicorn optional. Any ideas, or could you even suggest the best labeler for each solution?

    Read the article

  • Google Talk Chat/Conference Solutions

    - by Adam Davis
    I started using the old confbot python conference script in 2005 for my family. This essentially implements an IRC like conference room over Google Talk (or any Jabber/XMPP server). It has significantly increased family communication, and has become rather indispensable due to this. Recently it's begun to have severe problems (people can't see each other in the conference room) which has nearly killed the usefulness of it. Before I develop my own software or debug confbot (probably not - it uses an older jabber library that hasn't been updated since 2003) I wanted to see what other solutions exist that meet our needs: Supports Google Talk (Sorry, I'm not going to try to convince everyone involved to move to a new IM or other client) Free and open source (ideal, but not required) Runs on Windows (Not a web service run by someone else) Implements basic functionality such as kick/ban, emotes Remembers who joined the conference room across restarts Obeys Do Not Disturb and Busy status Archives all activity -Adam

    Read the article

  • Asterisk - Trying to use call files to create a conference call between two dynamic numbers

    - by Hank
    I'm trying to setup an Asterisk system that will allow me to create a conference call between two dynamic numbers. It seems I can use 'call files' to make Asterisk initiate the call without needing an incoming call - http://www.voip-info.org/tiki-index.php?page=Asterisk+auto-dial+out This example seems to be what I'd need: Channel: SIP/mytrunk/12345678 MaxRetries: 2 RetryTime: 60 WaitTime: 30 Context: callme Extension: 800 Priority: 2 I can generate this file with some scripting language and then place it into the Asterisk Call File folder. The problem I'm having is: How do I call out to two numbers and join them in a conference call? The MeetMe plugin/extension seems to be what I need in terms of conference calling, I'm just unsure as to how I'd use the two together and join them. Also, is it possible to have multiple 2-person conference calls at the same time? Is setting this up as simple as setting aside X amount of 'channels' in the meetme.conf?

    Read the article

  • Asterisk - Trying to use call files to create a conference call between two dynamic numbers

    - by Hank
    I'm trying to setup an Asterisk system that will allow me to create a conference call between two dynamic numbers. It seems I can use 'call files' to make Asterisk initiate the call without needing an incoming call - http://www.voip-info.org/tiki-index.php?page=Asterisk+auto-dial+out This example seems to be what I'd need: Channel: SIP/mytrunk/12345678 MaxRetries: 2 RetryTime: 60 WaitTime: 30 Context: callme Extension: 800 Priority: 2 I can generate this file with some scripting language and then place it into the Asterisk Call File folder. The problem I'm having is: How do I call out to two numbers and join them in a conference call? The MeetMe plugin/extension seems to be what I need in terms of conference calling, I'm just unsure as to how I'd use the two together and join them. Also, is it possible to have multiple 2-person conference calls at the same time? Is setting this up as simple as setting aside X amount of 'channels' in the meetme.conf?

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >