Search Results

Search found 23 results on 1 pages for 'dban'.

Page 1/1 | 1 

  • Error in using DBAN on HDD

    - by John Watson
    I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

    Read the article

  • Why does DBAN crash on my HDDs?

    - by John Watson
    I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

    Read the article

  • DBAN Hangs at PCI (sysfs)

    - by David
    I'm running Derik's Boot and Nuke 2.2.6 (beta). When I get to a blue screen(Not BSOD) the following is printed. Derik's Boot and Nuke 2.2.6 (beta) is starting. Waiting for USB devices to register..........................done. PCI (sys) After that, it just sits there forever... Any advice, other than an older version of DBAN? I have gotten this version of DBAN to work on an older machine before.

    Read the article

  • DBan not working because disk has bad sectors?

    - by canadiancreed
    Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

    Read the article

  • How to wipe an IPod with DBAN

    - by Matt Powers
    I'm looking to use a utility such as Darik's Boot And Nuke (www.dban.org) to wipe my iPod (classic fifth generation) so I can sell it on Ebay (without having to worry about my data being recovered.) Any suggestions on how to do this?

    Read the article

  • DBan not working because disk has bad sectors? [migrated]

    - by canadiancreed
    Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

    Read the article

  • Delete Data From Your Hardrive With DBAN

    This week, I felt the need to re publish an article that my web designer wrote a few years ago. It was written about formatting files from a hard drive to make them unrecoverable. This is very import... [Author: Chris Holgate - Computers and Internet - April 09, 2010]

    Read the article

  • Darik's Boot And Nuke - ERROR /dev/sda

    - by user1403844
    I'm trying to wipe the drive of an old company computer with DBAN so I can install Redhat Enterprise and learn Linux (it's a Dell Inspiron 1210, if that matters). I burnt DBAN to a CD and boot from that CD (running on an external USB CD drive). Whenever I try to run the utility--whether it's Autonuke, or any of manual wiping methods-- it spits on the errors: ERROR /dev/sdb ERROR /dev/sda From what I've read on some other forums, there are some issues with other drives or removable media interfering however I've disabled all other drives in bios, leaving just CD/DVD and the Hard Disk but still no luck. Any advice on how I can reconcile these errors and wipe the disk?

    Read the article

  • How to boot live iso images?

    - by virpara
    I found that it can be done with loopback as follows menuentry "Lucid ISO" { loopback loop (hd0,1)/boot/iso/ubuntu-10.04-desktop-i386.iso linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/boot/iso/ubuntu-10.04-desktop-i386.iso noprompt noeject initrd (loop)/casper/initrd.lz } But it works only with ubuntu or its derivatives. How it should be written if I want to boot other live images like fedora, cent, opensuse etc. ? Edit: I found some other entries but all of them are probably debian based. menuentry "Linux Mint 10 Gnome ISO" { loopback loop /linuxmint10.iso linux (loop)/casper/vmlinuz file=/cdrom/preseed/mint.seed boot=casper initrd=/casper/initrd.lz iso-scan/filename=/linuxmint10.iso noeject noprompt splash -- initrd (loop)/casper/initrd.lz } menuentry "DBAN ISO" { loopback loop /dban.iso linux (loop)/DBAN.BZI nuke="dwipe" iso-scan/filename=/dban.iso silent -- } menuentry "Tinycore ISO" { loopback loop /tinycore.iso linux (loop)/boot/bzImage -- initrd (loop)/boot/tinycore.gz } menuentry "SystemRescueCd" { loopback loop /systemrescuecd.iso linux (loop)/isolinux/rescuecd isoloop=/systemrescuecd.iso setkmap=us docache dostartx initrd (loop)/isolinux/initram.igz } Edit2: How to chainload grub and syslinux from grub2? Edit3: I want to boot other live images without any removable devices and use grub2 so need menu entries specific to grub2.

    Read the article

  • Used DBAN to wipe Lenovo u410 then installed Ubuntu. Need to install windows 8, but I get an error.

    - by David
    When I try to boot from my windows 8 USB (tested on a separate PC), I get this error text "The boot configuration data for your pc is missing or contains errors." I want to install windows again so I can fix a battery issue I'm having. Lenovo's power management app has an option to keep the battery at 60% if the laptop stays plugged in most of the time. I enabled this, then formatted without changing it back. I think there might be a raid setup that I may need to remove or something. I don't mind removing Ubuntu and starting fresh. I would just love some help with all this, I'm a noob when it comes to Linux.

    Read the article

  • Wipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way

    - by The Geek
    Giving a computer to somebody else? Maybe you’re putting it out on Craigslist to sell to a stranger—either way, you’ll want to make sure that your drive is completely wiped, scrubbed, and clean of any personal data. Here’s the easy way to do it. If you only have access to an Ubuntu Live CD or thumb drive, you can actually use that instead if you prefer, and we’ve got you covered with a full guide to securely wiping your PC’s hard drive. Otherwise, keep reading. Wipe the Drive with DBAN Darik’s Boot and Nuke CD is the easiest way to permanently and totally destroy every bit of personal information on that drive—nobody is going to recover a thing once this is done. The first thing you’ll need to do is download a copy of the ISO image, and then burn it to a blank CD with something really useful like Imgburn. Just choose Burn image to Disc at the start screen, select the little file icon, grab the downloaded ISO, and then go. If you need a little more help, we’ve got you covered with a beginner’s guide to burning an ISO image. Once you’re done, stick the disc into the drive, start the PC up, and then once you boot to the DBAN prompt you’ll see a menu. You can pretty much ignore everything on here, and just type… autonuke And there you are, your disk is now being securely wiped. Once it’s all done, you can remove the CD, and then either pack the PC up to sell, or re-install Windows on there if you feel like it. More Advanced Method If you’re really paranoid, want to run a different type of wipe, or just like fiddling with the options, you can choose F3 or hit Enter at the prompt to head to the advanced selection screen. Here you can choose exactly which drive to wipe, or hit the M key to change the method. You’ll be able to choose between a bunch of different wipe options. The Quick Erase is all you really need though.   So there you are, easy PC wiping in one package. What about you? Do you make sure to wipe your old PCs before giving them away? Personally I’ve always just yanked out the hard drives before I got rid of an old PC, but that’s just me. Download DBAN from dban.org Similar Articles Productive Geek Tips Use an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveHow to Dispose of Old Computers ResponsiblyHow To Delete a VHD in Windows 7Speed up External USB Hard Drives in Windows VistaSpeed Up SATA Hard Drives in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites

    Read the article

  • Locked out of windows 7 pc

    - by Fasih Khatib
    This is a question on behalf of my friend. His kid brother installed a password on his windows 7 home premium desktop and now he forgot. How does he get in? Since the data is backed up into a flash drive, i suggested nuking using DBAN and reinstalling OS. To complicate matters further, his CD drive doesn't work. In that case, what options does he have available to recover his password? Can DBAN be run from a bootable pendrive?

    Read the article

  • Somebody please help me, desperate... please

    - by Beast
    I followed a friend's advice and am using Ubuntu, and was enjoying it. I began to get system errors, tried to fix to no avail. It won't let me download anything to Ubuntu, saying unauthorized or untrusted software, or something. NOW MY CD DRIVE doesn't work! So I can't boot dban or anything via cd. Finally I bought a usb stick but it won't boot dban or anything. I'm about to just smash this with a hammer. Help me start over.

    Read the article

  • Disk wipe preferences

    - by hmvm123
    I manage a pool of systems that are loaded with software and sent to potential customers for evaluations which often land sensitive information on the drives. Before shipping them back, they typically like a standard wipe to be run to clean out the drives. Most are familiar with DBAN so I try to make sure it can work on my systems. Unfortunately, this means I'm usually in RAID driver hell trying to make sure that the versions out there support the ones my systems are shipping with. These are various kinds of 3ware and LSI ones. Consequently, I have DBAN 1.0.7 working on some, a beta version of 2.0 on the others and 2.2.6 on some of the latest SSD based ones. Now with the LSI controllers on my IBM x3550 M3s (1064/1068) I'm getting no love at all. Is there a way out? Do you buildroot with DBAN and try to piece the drivers together? Any other tools, free or commerical, that stay updated. I'm trying to walk people of varying technical proficiencies through this, so a boot disk with simple choices is preferable.

    Read the article

  • "Failed to create swap space" error during installation

    - by Welsh Heron
    I've been trying to install Ubuntu for the past two days or so, but I've been running into a problem: every time I run the installation program on the LiveCD, I always get the same (or a very similar) error: "Failed to create Swap space The creation of swap space in partition #3 of SCSI5 (0,0,0)(sda) failed." So far, I've run DBAN (Darik's Boot and Nuke) on my HDD once, to make absolutely sure that everything on it had been erased. Then, I simply put in the LiveCD, and let it run the automated install. I get the above error directly after I tell it to automatically partition the HDD (it will work for a second or so, then this will pop up), forcing me back to the screen that lets me choose whether I want to automatically or manually partition the HDD. Well, after failing to install the software manually, I did a little research and learned enough about partitioning Linux to use the 'Manual partitioning' option. I partitioned the HDD as follows (it's a 1TB drive): /home - (the rest)- ext2, / - 20GB - ext2, /boot - 100MB - ext2, /swap - 8GB /EFIboot - 40MB The only difference when I tried this method was that I got THIS message: "Failed to create Swap space The creation of swap space in partition #2 of SCSI5 (0,0,0)(sda) failed." Basically, the only difference was that there was now a '2' instead of a '3'. If I may ask, what exactly am I doing wrong? I've tried looking around the internet (that's basically all I've done for the last two days), but no one seems to have the same problem that I have, and I've tried most of the solutions for similar problems (DBAN, formatting partitions in ext2 format, etc). The only thing I haven't tried is using the terminal to manually partition the HDD...and I actually DID try to do this, but I wasn't able to get past 'su' 's password demand, so I wasn't able to use the terminal. Thank you for your help in advance. ~Welsh

    Read the article

  • How to create multiboot flash drive

    - by Nrew
    I've found a guide here: http://www.pendrivelinux.com/boot-multiple-iso-from-usb-multiboot-usb/ And found this menu.lst in my flash drive, which seems to be the one that I'm seeing when I boot using my flash drive: # This Menu Created by Lance http://www.pendrivelinux.com # Ongoing Suggested Menu Entries and the Suggestor are noted! default 0 timeout 30 color NORMAL HIGHLIGHT HELPTEXT HEADING splashimage=(hd0,0)/splash.xpm.gz foreground=FFFFFF background=0066FF title Memtest86+ find --set-root /memtest86+-4.00.iso map --mem /memtest86+-4.00.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by madprofessor title Boot Clonezilla root (hd0,0) kernel /clonezilla/live/vmlinuz live-media-path=clonezilla/live bootfrom=/dev/sd boot=live union=aufs noprompt ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" ocs_lang="" vga=791 ip=frommedia initrd /clonezilla/live/initrd.img title Parted Magic 4.9 (Partition Tools) find --set-root /pmagic-4.9.iso map /pmagic-4.9.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by Deb title Partition Wizard 4.2 (Partition Tools) find --set-root /pwhe42.iso map /pwhe42.iso (hd32) map --hook root (hd32) chainloader (hd32) title Balder DOS image (FreeDOS) map --unsafe-boot /balder10.img (fd0) map --hook chainloader --force (fd0)+1 rootnoverify (fd0) # Suggested by Szymon Silski title Linux Mint 8 find --set-root /LinuxMint-8.iso map /LinuxMint-8.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/mint.seed boot=casper persistent iso-scan/filename=/LinuxMint-8.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 find --set-root /ubuntu-10.04-desktop-i386.iso map /ubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz title Xubuntu 10.04 (XFCE Desktop) find --set-root /xubuntu-10.04-desktop-i386.iso map /xubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz title Kubuntu 10.04 (KDE Desktop) find --set-root /kubuntu-10.04-desktop-i386.iso map /kubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz # Suggested by Ambriel title Lubuntu 10.04 (LXDE Lightweight Desktop) find --set-root /lubuntu-10.04.iso map /lubuntu-10.04.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper persistent iso-scan/filename=/lubuntu-10.04.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 Netbook Remix (NetBook Distro) find --set-root /ubuntu-10.04-netbook-i386.iso map /ubuntu-10.04-netbook-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/netbook-remix.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04-netbook-i386.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 Server Edition Installer (32 bit Installer Only) find --set-root /ubuntu-10.04-server-i386.iso map /ubuntu-10.04-server-i386.iso (0xff) map --hook root (0xff) kernel /install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed boot=install iso-scan/filename=/ubuntu-10.04-server-i386.iso splash initrd /install/initrd.gz title Ubuntu 9.10 find --set-root /ubuntu-9.10-desktop-i386.iso map /ubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz title Xubuntu 9.10 find --set-root /xubuntu-9.10-desktop-i386.iso map /xubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz title Kubuntu 9.10 find --set-root /kubuntu-9.10-desktop-i386.iso map /kubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz # Ubuntu Server and Netbook Remix suggested by Wojciech Holek title Ubuntu 9.10 Server Edition Installer (Installer Only) find --set-root /ubuntu-9.10-server-i386.iso map /ubuntu-9.10-server-i386.iso (0xff) map --hook root (0xff) kernel /install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed boot=install iso-scan/filename=/ubuntu-9.10-server-i386.iso splash initrd /install/initrd.gz title Ubuntu 9.10 Netbook Remix (NetBook Distro) find --set-root /ubuntu-9.10-netbook-remix-i386.iso map /ubuntu-9.10-netbook-remix-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/netbook-remix.seed boot=casper persistent iso-scan/filename=/ubuntu-9.10-netbook-remix-i386.iso splash initrd /casper/initrd.lz title Ubuntu 9.10 Rescue Remix (Recovery Tools) find --set-root /ubuntu-rescue-remix-9-10-revision1.iso map /ubuntu-rescue-remix-9-10-revision1.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper iso-scan/filename=/ubuntu-rescue-remix-9-10-revision1.iso splash initrd /casper/initrd.lz title DSL 4.4.10 find --set-root /dsl-4.4.10-initrd.iso map --mem /dsl-4.4.10-initrd.iso (hd32) map --hook root (hd32) chainloader (hd32) title AVG Rescue CD (Anti-Virus + Anti-Spyware) find --set-root /avg_arl_en_90_100114.iso map /avg_arl_en_90_100114.iso (hd32) map --hook chainloader (hd32) title Ultimate Boot CD 4.11 find --set-root /ubcd411.iso map /ubcd411.iso (hd32) map --hook chainloader (hd32) title OphCrack XP 2.3.1 (XP Password Cracker) find --set-root /ophcrack-xp-livecd-2.3.1.iso map /ophcrack-xp-livecd-2.3.1.iso (0xff) map --hook root (0xff) kernel /boot/bzImage rw root=/dev/null vga=normal lang=C kmap=us screen=1024x768x16 autologin initrd /boot/rootfs.gz title OphCrack Vista 2.3.1 (Vista Password Cracker) find --set-root /ophcrack-vista-livecd-2.3.1.iso map /ophcrack-vista-livecd-2.3.1.iso (0xff) map --hook root (0xff) kernel /boot/bzImage rw root=/dev/null vga=normal lang=C kmap=us screen=1024x768x16 autologin initrd /boot/rootfs.gz # Suggested by Greg Steer title Offline NT Password & Registy Editor find --set-root /cd080802.iso map /cd080802.iso (hd32) map --hook chainloader (hd32) title SliTaz 2.0 find --set-root /slitaz-2.0.iso map --mem /slitaz-2.0.iso (hd32) map --hook chainloader (hd32) title Riplinux 9.3 find --set-root /RIPLinuX-9.3.iso map --heads=0 --sectors-per-track=0 /RIPLinuX-9.3.iso (0xff) || map --heads=0 --sectors-per-track=0 --mem /RIPLinuX-9.3.iso (0xff) map --hook chainloader (0xff) # Suggested by Sunny title YlmF (Windows Like OS) find --set-root /YlmF_OS_EN_v1.0.iso map /YlmF_OS_EN_v1.0.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/YlmF_OS_EN_v1.0.iso splash initrd /casper/initrd.lz # Suggested by Martin Andersson title DBAN 1.0.7 (Drive Nuker) find --set-root /dban-1.0.7_i386.iso map --mem /dban-1.0.7_i386.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by Robin McGough title xPUD 0.9.2 (NetBook Distro) find --set-root --ignore-floppies --ignore-cd /xpud-0.9.2.iso map --heads=0 --sectors-per-track=0 /xpud-0.9.2.iso (hd32) map --hook chainloader (hd32) title Puppy 4.3.1 find --set-root /puppy/pup-431.sfs kernel /puppy/vmlinuz initrd /puppy/initrd.gz # Suggested by Relst title Run a Linux OS from the Internet kernel /gpxe.lkrn I also put some .iso files for os installers (Windows xp sp2 and Ubuntu 10.04) But they didn't show up in the list when I booted Do I need to: extract the .iso files and put in in their respective folders? Add the os that I added on the menu.lst? How do I add the iso image(os) in the menu.lst? Before adding the .iso files I first made a folder named Windows xp sp2 then placed the .iso files in there. Please help, I think I need to add the folder name or the file name on the menu.lst but I don't know how

    Read the article

  • Wiping a laptop from Bios

    - by joshuahornby10
    I am trying to wipe an old laptops hard drive, it doesn't have a CD drive so have been using a USB to try and wipe the hard drive from the BIOS. I have been using http://www.dban.org/ which I installed as an ISO on the USB Stick. When ever I try to boot into this I get an error saying 'No operating system' Does anyone know of a way to wipe a hard drive? I also tried to boot into safe mode but I just stay on a constant loop. Thanks

    Read the article

  • Computer refuses to boot either ubuntu disk I'm using

    - by xtraorange
    I'm attempting to set up an Amahi server, and thus have taken an older PC and wiped it clean using DBAN. I'm now in the process of installing Ubuntu, but for some reason the computer refuses to recognize either form of Ubuntu I throw at it, even though it recognizes the Windows XP CD fine. Things it can't be: Boot order - I've tripple checked A bad DVD - I've booted the live CD off of my Mac just fine. A drive issue - the drive boots other cd's just fine, I've tested both an XP and the ultimate boot disk for windows... they are booting fine. A drive conflict - I have unplugged the only hard drive, leaving the DVD drive alone, still no recognition. I've tried both Ubuntu 12 and an older Ubuntu 10 CD, it refuses to recognize either one. It's like my computer has decided it will have nothing to do with Ubuntu. Any help would be greatly appreciated.

    Read the article

  • How to Deauthorize Flash Content Before You Sell Your PC

    - by Taylor Gibb
    When it comes to selling your old digital equipment you usually should wipe it of all digital traces with something like DBAN, however if you cant there are some precautions you should take, here’s one related to flash content you may have viewed on your PC. When you rent or purchase a movie over a service that uses flash, it authorizes your PC to play that particular content. When you sell your PC, unless you deauthorize your PC, the new owner will still be able to view and play the content your purchased. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

    Read the article

  • Software that supports ATA Secure Erase Command

    - by vy32
    We have a lot of drives that need to be sanitized. NIST SP 800-88 recommends software that uses the ATA Secure Erase command. That's apparently the only way to be sure that the drive is properly wiped, due to bad-block remapping and such. I know that this functionality is available in hdparm. The problem with that approach is that it is inconsistent on multiple platforms, occasionally times out, doesn't have error-checking logic, and doesn't check the resulting drive to make sure that it has, in fact, been erased. So a proper program might use hdparm, but hdparm by itself isn't an answer. I'm looking for open source software that implements ATA Secure Erase. Ideally it will be a bootable disk image like DBAN, but it will use the ATA command.

    Read the article

  • Issues with hard disk secure erase

    - by John Watson
    I want to completely wipe all the data and both OSes (Ubuntu and Windows 7) from my hard drive. I tried DBAN but it gives me an error and does not run. I am looking for an alternative. After reading some articles online, I came to know that, using a Linux live CD, it can be done using either of following commands. a) sudo dd if=/dev/zero of=/dev/sda b) sudo shred -vfz -n 1 /dev/sda My questions are 1) Which option (a or b) is more secure (wipes everything) and faster? 2) Does either of the options damage the hard drive or anything? I want to use hard drive again i.e. installing Windows and Ubuntu again.

    Read the article

  • What processes would make the selling of a hard drive that previously held sensitive data justifiable? [closed]

    - by user12583188
    Possible Duplicate: Securely erasing all data from a hard drive In my personal collection are an increasing number of relatively new drives, only put on the shelf due to upgrades; in the past I have never sold hard drives with used machines for fear of having the encrypted password databases that have been stored on them compromised, but as their numbers increase I find myself more tempted to do so (due to the $$$ I know they're worth on the used market). What tools then exist to make the recovery of data from said drives difficult to the extent that selling them could be justified? Another way of saying this would be: what tools/method exist for making the attempts at recovery of any data previously stored on a certain drive impractical? I assume that it is always possible to recover data from a drive that is in working order. I assume also there are some methods for preventing recovery of data due a program called dban, and one particular feature in macOSX that deals with permanently deleting data from a disk.

    Read the article

  • Erase just the free space on my hard drive

    - by Patriot
    I'm about to give away an older computer with just the Windows XP operating system intact and all other programs uninstalled. However, upon peeking at the "free space" with software called "Recuva", I notice lots of deleted things that could be recoverable. Some of these include sensitive data files, pdfs, and other personal items that I would not want retrieved. I ran a program called "Eraser" to try and overwrite that data, but it failed to do an adequate job. I also tried to do the job with "Glary Utilities" but it failed too. Short of installing a new, very cheap hard drive and re-installing the bare bones operating system, I'm out of ideas. EDIT - WOW!!! I was not really expecting this many GREAT ideas. My next question is this. If I go the DBAN route and truely wipe the hard drive, then restore my disc image (I use Acronis True Image) will it also restore the free space data? Does imaging just copy readable data? I have an old image of when the OS was first installed.

    Read the article

1