Search Results

Search found 23 results on 1 pages for 'devnull'.

Page 1/1 | 1 

• Why does this mod_rewrite rule 'not-match'? (big rewrite log included)

  - by Christopher

  I've got a scenario involving two domains: WordPress site hosted on domain1.com domain2.co.uk, simply redirecting users to domain1 via mod_rewrite This rule applies irrespective of whether www. is specified or not. (It's eventually removed from the URL, I'm a no-WWW fan.) There's nothing on domain2.co.uk at all except for an .htaccess with some mod_rewrite rules. However, I want to be able to allow users to be redirected to the correct article URI even if they specify the "wrong" URL (i.e., a 301 redirect preserving the stuff after the first forward slash). I'm currently achieving this with this ruleset: RewriteCond %{HTTP_HOST} ^((www\.)?[^\.]+)\.domain2\.co\.uk [NC,OR] RewriteCond %{HTTP_HOST} ^domain2\.co\.uk [NC] RewriteRule ^(.*)$ http://domain1.com/$1 [R=301,L] This works but is uglier than I want it to be. I'm not a mod_rewrite zen master, but from what I can tell the top rule should match irrespective of whether www. is specified... But it doesn't. In order to catch www-less requests, I need the second RewriteCond. From the rewrite log, with just the first RewriteCond: [domain2.co.uk/sid#e200498][rid#e670168/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/ -> [domain2.co.uk/sid#e200498][rid#e670168/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '' [domain2.co.uk/sid#e200498][rid#e670168/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e670168/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/ [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.html [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.htm [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.shtml [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php5 [domain2.co.uk/sid#e200498][rid#e666c98/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php4 [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php3 [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.phtml [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.cgi [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/403.shtml -> 403.shtml [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '403.shtml' [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/403.shtml [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/favicon.ico -> favicon.ico [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri 'favicon.ico' [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/favicon.ico [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/404.shtml -> 404.shtml [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '404.shtml' [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/404.shtml However with the second RewriteCond added, the rule works, and the logs show this: [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/ -> [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '' [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)?[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^domain2\.co\.uk' [NC] => matched [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (2) [perdir /home/devnull/domains/domain2.co.uk/public_html/] rewrite '' -> 'http://domain1.com/' [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (2) [perdir /home/devnull/domains/domain2.co.uk/public_html/] explicitly forcing redirect with http://domain1.com/ [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] escaping http://domain1.com/ for redirect [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] redirect to http://domain1.com/ [REDIRECT/301] Can anybody help me figure out why it just won't work with the one rule? I feel like I'm missing the bleeding obvious, and while the second RewriteCond is a valid workaround, it's a kludge and that annoys me. ;-) All help appreciated...

  Read the article

• Using Zend_HTTP_Client instead of CURL

  - by Vincent

  All, I want to use Zend_HTTP_CLient instead of CURL as there are issues with using curl on Solaris. I have the following curl code.. How will this code be written if I want to use Zend_HTTP_Client? $ch = curl_init(); $devnull = fopen('/tmp/cookie.txt', 'w'); curl_setopt($ch, CURLOPT_STDERR, $devnull); curl_setopt($ch, CURLOPT_POST, 1); curl_setopt($ch, CURLOPT_URL, $desturl); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false); curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, false); curl_setopt($ch, CURLOPT_HEADER, false); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 0); curl_setopt($ch, CURLOPT_CONNECTTIMEOUT,800); curl_setopt($ch, CURLOPT_AUTOREFERER, true); curl_setopt($ch, CURLOPT_ENCODING, 'gzip,deflate'); curl_setopt($ch, CURLOPT_POSTFIELDS, $postdata); $retVal = curl_exec($ch); print_r(curl_error($ch)); curl_close($ch); if ($devnull) { fclose($devnull); } Thanks

  Read the article

• CURL - https - solaris

  - by Vincent

  All, I am receiving the following error when I use PHP to curl to a https site. Both PHP and the https site are hosted on Solaris. This error seems to occur occassionally but frequently. error:80089077:lib(128):func(137):reason(119) This is the curl code I am using: $ch = curl_init(); $devnull = fopen('/tmp/cookie.txt', 'w'); curl_setopt($ch, CURLOPT_STDERR, $devnull); curl_setopt($ch, CURLOPT_POST, 1); curl_setopt($ch, CURLOPT_URL, $desturl); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false); curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, false); curl_setopt($ch, CURLOPT_HEADER, false); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 0); curl_setopt($ch, CURLOPT_CONNECTTIMEOUT,800); curl_setopt($ch, CURLOPT_AUTOREFERER, true); curl_setopt($ch, CURLOPT_ENCODING, 'gzip,deflate'); curl_setopt($ch, CURLOPT_POSTFIELDS, $postdata); $retVal = curl_exec($ch); print_r(curl_error($ch)); curl_close($ch); if ($devnull) { fclose($devnull); } How can I fix this error? If not, is there an alternative to curl?

  Read the article

• Windows 2008 Group Policy Setting? - Migration Headache

  - by DevNULL

  I have a small domain of users that I just migrated from a linux domain running open-ldap. Our new servers are running Windows 2008 Standard. I've installed Active Directory and everything is working perfectly... except that the initial user privileges is pretty restrictive and I need to loosen it up a bit. For example once they login to their workstations, they can create new files and folders but can not modify existing files or start. I basically want to open it all up except for software installations. Can someone please help with with this migration headache?

  Read the article

• EC2 instance store cloning or to ebs via gui management console

  - by devnull

  I have found similar questions here but the answer are either outdated or are from the command line. The case is this. I have an EC2 instance using instance store (this was the only AMI available for Debian 6 in Ireland). Now through the AWS GUI I can do a snapshot of the instance volume and/or even create a volume. But an image made from the snapshot doesn't boot. What is the best solution to either clone an EC2 instance that uses instance store OR from the created snapshot of the instance store to launch a new EBS instance (identical clone) FROM the gui aws management console and not command line ? Before turning this down consider that there is not similar question on how to do it via the aws management console. hint can't be done is not an appropriate answer. As you can create a snapshot of the instance store backed instance and/or a volume and create an AMI from that snapshot.

  Read the article

• Ruby Passeger + Nginx or lighthttpi + fgci for shared hosting

  - by devnull

  I have set up a passenger + nginx setup and I plan to offer a free non-commercial hosting (or in fact on the fly deployment) for rack-based frameworks (e.g. camping, sinatra). I am facing an "issue" with passenger. For each application you need to configure nginx.conf (it would be the same with apache so it is not an nginx issue) with: server { ... passenger_base_uri /app1; passenger_base_uri /app2; passenger_base_uri /app3; } Now this is not inherently bad as, in theory, I could allow a user to run just one app on his webspace but even in this case I need to create a new server directory on nginx e.g. (user.domain.com). As this will mainly be used to deploy apps the behavior I am looking at is more the possibility to auto map several apps (e.g. app1, app2, app3, app4) under the same server (your app.com/app1 yourapp.com/app2) without having to update the nginx or apache file each time. This seems to be a limitation in passenger. As such I am thinking about an alternative with lighttpd and fastcgi. Would this allow immediate deployment without touching the lighttpd config file e.g. I create a new directory with app2 and it will run immediately ? What is your experience in performance difference between passenger + nginx vs. lighttpd + fastcgi ? thanks in advance scenario details: on nginx + passenger - user cannot add a new sub-folder and run another sinatra/camping app without declaring the path on nginx.conf and restarting the server; wished behavior with the new setup: - user can add a new folder with a new app and it would run on lighttpd+fcgi without any extra configuration of the web server;

  Read the article

• EC2 instance store cloning or to ebs via guy management console

  - by devnull

  I have found similar questions here but the answer are either outdated or are from the command line. The case is this. I have an EC2 instance using instance store (this was the only AMI available for Debian 6 in Ireland). Now through the AWS GUI I can do a snapshot of the instance volume and/or even create a volume. But an image made from the snapshot doesn't boot. What is the best solution to either clone an EC2 instance that uses instance store OR from the created snapshot of the instance store to launch a new EBS instance (identical clone) FROM the gui aws management console and not command line ? Before turning this down consider that there is not similar question on how to do it via the aws management console. hint can't be done is not an appropriate answer. As you can create a snapshot of the instance store backed instance and/or a volume and create an AMI from that snapshot.

  Read the article

• Windows Server 2008 Migration - Did I miss something?

  - by DevNULL

  I'm running in to a few complications in my migration process. My main role has been a Linux / Sun administrator for 15 yrs so Windows server 2008 environment is a bit new to me, but understandable. Here's our situation and reason for migrating... We have a group of developers that develop VERY low-level software in Visual C with some inline assembler. All the workstations were separate from each other which cased consistency problems with development libraries, versions, etc... Our goal was to throw them all on to a Windows domain were we can control workstation installations, hot fixes (which can cause enormous problems), software versions, etc... All Development Workstations are running Windows XP x32 (sp3) and x64 (sp2) I running in to user permission problems and I was wondering maybe I missed one, tWO or a handful of things during my deployment. Here is what I have currently done: Installed and Activated Windows Server 2008 Added Roles for DNS and Active Directory Configured DNS with WINS for netbios name usage Added developers to AD and mapped their shared folders to their profile Added roles for IIS7 and configured the developers SVN Installed MySQL Enterprise Edition for development usage Not having a firm understanding of Group Policy I haven't delved deeply in to that realm yet. Problems I'm encountering: 1. When I configure any XP workstations to logon our domain, once a user uses their new AD login, everything goes well, except they have very restrictive permissions. (Eg: If a user opens any existing file, they don't have write access, except in their documents folder.) Since these guys are working on low system level events, they need to r/w all files. All I'm looking to restrict in software installations. Am I correct to assume that I can use WSUS to maintain the domains hot fixes and updates pushed to the workstations? I need to map a centralized shared development drive upon the users login. This is open to EVERYONE. Right now I have the users folders mapped upon login through their AD profile. But how do I map a share if I've already defined one within their profile in AD? Any responses would be very grateful. Do I have to configure and define a group policy for the domain users? Can I use Volume Mirroring to mirror / sync two drives on two separate servers or should I just script a rsync or MS Synctool? The drives simply store nightly system images.

  Read the article

• nohup or persistent process on Mac OS X ssh

  - by devnull

  I know this has been asked before but none of the answers seems to work in OS X mountain lion. I would like to launch a process via SSH and close the terminal without kill the process. nohup ccl64 -e '(ql:quickload :"file")' & doesn't work. When the terminal is closed the process dies nohup ccl64 -e '(ql:quickload :"file")' same here I think there must be a way. this is very annoying as it works as a standard in any linux system yet mac os x refuses to work with any of these combinations. Thanks in advance

  Read the article

• Windows Server 2008 Stnd - Wins Issue Possibly???

  - by DevNULL

  Currently we have a freshly setup Windows Server 2008 server acting as DNS and AD,Print and File server. I setup VPN and routing services and was able to successfully connect through VPN however I can't resolve any host using NETBios names. Only IP addresses. Sounds like I need to add a role for WINS but since this is a LIVE environment I'm a little hesitant about adding and removing additions to the box. What would I need to do to resolve this issue?

  Read the article

• Domain workstation acting up and I can't track it down.

  - by DevNULL

  I have a developer with a Windows XP (SP2) 64 bit machine. If the machine is left on overnight (or any period of time longer than 5-6 hours) it takes 2-3 minutes to open any local drive and his network drives are no longer accessible. Here's what the system logs report... Any Help BTW: The problem just started a week ago and nothing has changed on the domain controller / AD or his machine. --- ERROR 1 Event Type: Error Event Source: NETLOGON Event Category: None Event ID: 5719 Date: 6/8/2010 Time: 9:17:26 AM User: N/A Computer: BFC1 Description: This computer was not able to set up a secure session with a domain controller in domain UR due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. ADDITIONAL INFO If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5e 00 00 c0 ^..A --- ERROR 2 The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID {555F3418-D99E-4E51-800A-6E89CFD8B1D7} to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19). This security permission can be modified using the Component Services administrative tool. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. --- ERROR 3 Event Type: Error Event Source: RemoteAccess Event Category: None Event ID: 20106 Date: 6/8/2010 Time: 10:12:18 AM User: N/A Computer: BFC1 Description: Unable to add the interface {E76F0A78-7A0B-4EBB-A081-BA3BD452FC4C} with the Router Manager for the IP protocol. The following error occurred: Cannot complete this function. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: eb 03 00 00 e...

  Read the article

• Outlook displaying sender incorrectly

  - by Devnull

  In one user mailbox anything sent from any distribution list in our domain shows up as being from 'System Administrator'. It only happens when they are viewing the inbox using outlook (OWA is not affected), and its persisted across computers (though it did not happen immediately). When other users view the inbox from their outlook install (ie open users folder), everything appears as normal. Other folders are not affected. if a message is moved into a subfolder, the sender displays properly. Because of the persistence, and it only affecting one user, I suspect some user behavior is causing this, but i cannot determine what. Ive checked the contact list, and its not that.

  Read the article

• Windows 2008 Group Policy Setting? - Migration Headache

  - by DevNULL

  I have a small domain of users that I just migrated from a linux domain running open-ldap. Our new servers are running Windows 2008 Standard. I've installed Active Directory and everything is working perfectly... except that the initial user privileges is pretty restrictive and I need to loosen it up a bit. For example once they login to their workstations, they can create new files and folders but can not modify existing files or start. I basically want to open it all up except for software installations. Can someone please help with with this migration headache?

  Read the article

• New Windows 2008 server on Linux Domain

  - by DevNULL

  We just installed a Windows 2008 Enterprise server and I'm having a problem joining the domain. We're running Ubuntu Server, OpenLdap with Samba shares. Does anyone know of reference material where I can find information about getting this server to properly join our domain. I've tried googling various boolean searches with poor results.

  Read the article

• Advanced imap search with alpine?

  - by devnull

  I am using alpine since a few days and I am very happy with the IMAP functionality and the terrific speed. The only frustration is that the W search (whereis) isn't as powerful (and probably not meant to be). What would be the best solution to search all inbox messages e.g. with a specific from (and having alpine to show a list of these matching messages) or even in the entire collection of IMAP folders or in a specific IMAP folder (e.g. archive) ? I think this might need a special script

  Read the article

• ADFS http login failure not re-requesting credentials

  - by Devnull

  We have ADFS working with HTTP (401) login. If a user types their password incorrectly, ADFS barfs and requires that the browser be closed, rather than asking the user for to attempt to log in again. Reprompting for user credentials is the typical behavior with other web servers (even IIS). This appears to be an artifact of setting the HTTP session, but other HTTP-login applications dont behave this way. We are having additional issues now because some users are saving that password, and its causing them account lockouts because the browsers do not realize they need to update saved credentials. Anyone know of a workaround? Wed rather not enable forms login if possible.

  Read the article

• How to block access to addresses outside network (internet)

  - by devnull

  I have a homeserver, that is now connected to the internet with an own network device (ath0 - 192.168.1.x). It also has one more network interface (eth0 - 192.168.0.x). Soon I will get a second internet line that will be connected the second network. The server then has both networks with different internet lines available, but i only want it to connect to the internet on the old ath0 interface - not the new eth0 (192.168.0.x). Background of that constellation is that the new line has a volume-limit in traffic - the old hasn't and i need the new line for all mobile devices and laptops. The devices should be able to use the new network to connect to the internet and the server. The homeserver is a debian 6 with iptables and some already written rules for it. I need now a rule to block all outgoing internet access on the eth0 interface - i guess it could be something with --target != 192.168.0.0 but i did not succeed in finding the proper solution. Edit: found the solution: iptables -A OUTPUT -o eth0 -d 192.168.0.0/24 -m state --state NEW,ESTABLISHED -j ACCEPT With that setting, all traffic that uses the eth0 interface is only allowed if the destination is inside the network 192.168.0.x - all other traffic is denied .

  Read the article

• How to react when asked a question you already know during an interview

  - by DevNull

  The short story:- If you are asked a tough algorithmic/puzzle question during an interview, whose solution is already known to you, do you:- Honestly tell the interviewer that you know this question already? -- this could result in bursting the interviewer's ego and him increasing the complexity level of the subsequent questions. Do an Oscar deserving performance and act as if you are thinking and trying hard and slowly getting to the solution? -- depending on your acting skills, could majorly impress the interviewer making the rest of the interview easier. Long story:- OK, this question comes as a result of what happened to me in a recent telephonic interview that I gave - the interview was supposed to be all algorithmic. The interviewer started with an algorithmic question which I had luckily already seen here on Stackoverflow. The best solution to that problem is not very intuitive and is more of a you-get-it-if-you-know-it kind. Now, just to not disappoint the interviewer too much, I took a few seconds as if I was pondering on the problem and then blurted out the answer which I knew too well having read and admired it on SO already. But I guess that gave it away to the interviewer that I already knew this question and since then, he started asking me for more efficient solutions and I kept coming up with approaches (even if not correct or more efficient, but I did touch a lot of different data structures and algos) and he kept asking for more efficient solutions and generally seemed put off by my initial salvo which was unexpected. What should I have done? Cheers!

  Read the article

• simple form validation in dancer/perl

  - by devnull

  I am trying to do a simple form validation in perl dancer but I was wondering what would be the best way to validate simple parameters (e.g. field cannot be empty, validity of the email, minimum length of a field) in dancer/perl without any extra plugin or CPAN module here is the code so far post '/register' => sub { my $db = connect_db(); my $sql = 'insert into users (username, email, password, motivation) values (?, ?, ? ,?)'; my $sth = $db->prepare($sql) or die $db->errstr; $sth->execute(params->{'username'}, params->{'email'},params->{'password'}, params->{'motivation'}) or die $sth->errstr; set_flash('Hey you signed up !'); redirect '/thanks'; }; I did google it and I found several ways to do validation using CPAN modules like Form::Foo but how do it without that ?

  Read the article

• Select records by comparing subsets

  - by devnull

  Given two tables (the rows in each table are distinct): 1) x | y z 2) x | y z ------- --- ------- --- 1 | a a 1 | a a 1 | b b 1 | b b 2 | a 1 | c 2 | b 2 | a 2 | c 2 | b 2 | c Is there a way to select the values in the x column of the first table for which all the values in the y column (for that x) are found in the z column of the second table? In case 1), expected result is 1. If c is added to the second table then the expected result is 2. In case 2), expected result is no record since neither of the subsets in the first table matches the subset in the second table. If c is added to the second table then the expected result is 1, 2. I've tried using except and intersect to compare subsets of first table with the second table, which works fine, but it takes too long on the intersect part and I can't figure out why (the first table has about 10.000 records and the second has around 10). EDIT: I've updated the question to provide an extra scenario.

  Read the article

• How do you redirect a standard stream of a C++ routine wrapped with SWIG and exposed to Python?

  - by cmdev

  Is it possible to control the standard streams of C++ code in python? The code is wrapped with SWIG and then exposed to Python where I call one of its functions. I am getting all kinds of unwanted messages coming from C++ code and I want to suppress them either by not using the output stream or by redirecting it to a bit bucket, e.g. devnull from the os module.

  Read the article

• Why is my spawned process still causing IntelliJ to wait?

  - by itsadok

  I'm trying to start a server as part of an Ant artifact. Here are the relevant lines: <exec dir="." executable="cmd.exe" spawn="true"> <arg line="/c c:\Java\james-2.3.2\bin\debug.bat" /> </exec> If I start it with ant from the command line, a process is spawned and I get a command prompt and everything seems fine. However, if I start it from IntelliJ 6, my IDE, the build stays alive until I kill the server. Here's the line IntelliJ uses to start ant: C:\Java\jdk1.6.0_02\bin\java -Xmx128m -Dant.home=C:\Java\apache-ant-1.7.1 -Dfile.encoding=UTF-8 -classpath "C:\Java\apache-ant-1.7.1\lib\ant-antlr.jar;C:\Java\apache-ant-1.7.1\lib\ant-apache-bcel.jar;C:\Java\apache-ant-1.7.1\lib\ant-apache-bsf.jar;C:\Java\apache-ant-1.7.1\lib\ant-apache-log4j.jar;C:\Java\apache-ant-1.7.1\lib\ant-apache-oro.jar;C:\Java\apache-ant-1.7.1\lib\ant-apache-regexp.jar;C:\Java\apache-ant-1.7.1\lib\ant-apache-resolver.jar;C:\Java\apache-ant-1.7.1\lib\ant-commons-logging.jar;C:\Java\apache-ant-1.7.1\lib\ant-commons-net.jar;C:\Java\apache-ant-1.7.1\lib\ant-jai.jar;C:\Java\apache-ant-1.7.1\lib\ant-javamail.jar;C:\Java\apache-ant-1.7.1\lib\ant-jdepend.jar;C:\Java\apache-ant-1.7.1\lib\ant-jmf.jar;C:\Java\apache-ant-1.7.1\lib\ant-jsch.jar;C:\Java\apache-ant-1.7.1\lib\ant-junit.jar;C:\Java\apache-ant-1.7.1\lib\ant-launcher.jar;C:\Java\apache-ant-1.7.1\lib\ant-netrexx.jar;C:\Java\apache-ant-1.7.1\lib\ant-nodeps.jar;C:\Java\apache-ant-1.7.1\lib\ant-starteam.jar;C:\Java\apache-ant-1.7.1\lib\ant-stylebook.jar;C:\Java\apache-ant-1.7.1\lib\ant-swing.jar;C:\Java\apache-ant-1.7.1\lib\ant-testutil.jar;C:\Java\apache-ant-1.7.1\lib\ant-trax.jar;C:\Java\apache-ant-1.7.1\lib\ant-weblogic.jar;C:\Java\apache-ant-1.7.1\lib\ant.jar;C:\Java\apache-ant-1.7.1\lib\xercesImpl.jar;C:\Java\apache-ant-1.7.1\lib\xml-apis.jar;C:\Java\jdk1.6.0_02\lib\tools.jar;C:\Program Files\JetBrains\IntelliJ IDEA 6.0\lib\idea_rt.jar" com.intellij.rt.ant.execution.AntMain2 -logger com.intellij.rt.ant.execution.IdeaAntLogger2 -inputhandler com.intellij.rt.ant.execution.IdeaInputHandler -buildfile C:\Java\Projects\CcMailer\ccmailer.xml jar I suspect the inputhandler parameter has something to do with the problem, but if I run it myself the problem is not reproduced. Either way, I have only limited control over what IntelliJ does. My question is: how does IntelliJ even know the process is running? The Ant process is long gone. Is there a way to start a subprocess in a more sneaky way, so that IntelliJ won't even know there's anything to wait around for? Here's what I've tried so far: I tried using the start command, like this: <exec dir="." executable="cmd.exe" spawn="true"> <arg line="/c start cmd /c c:\Java\james-2.3.2\bin\debug.bat" /> </exec> I also tried using python, with code like this: import os.path import subprocess subprocess.Popen(["cmd.exe", "/c", "debug.bat"], stdin=open(os.path.devnull), stdout=open(os.path.devnull, "w"), stderr=subprocess.STDOUT) To no avail. The build window always stays up until I kill the server. Any ideas?

  Read the article

• CURL - HTTPS Wierd error

  - by Vincent

  All, I am having trouble requesting info from HTTPS site using CURL and PHP. I am using Solaris 10. It so happens that sometimes it works and sometimes it doesn't. I am not sure what is the cause. If it doesn't work, this is the entry recorded in the verbose log: * About to connect() to 10.10.101.12 port 443 (#0) * Trying 10.10.101.12... * connected * Connected to 10.10.101.12 (10.10.101.12) port 443 (#0) * error setting certificate verify locations, continuing anyway: * CAfile: /etc/opt/webstack/curl/curlCA CApath: none * error:80089077:lib(128):func(137):reason(119) * Closing connection #0 If it works, this is the entry recorded in the verbose log: * About to connect() to 10.10.101.12 port 443 (#0) * Trying 10.10.101.12... * connected * Connected to 10.10.101.12 (10.10.101.12) port 443 (#0) * error setting certificate verify locations, continuing anyway: * CAfile: /etc/opt/webstack/curl/curlCA CApath: none * SSL connection using DHE-RSA-AES256-SHA * Server certificate: * subject: C=CA, ST=British Columnbia, L=Vancouver, O=google, OU=FDN, CN=g.googlenet.com, [email protected] * start date: 2007-07-24 23:06:32 GMT * expire date: 2027-09-07 23:06:32 GMT * issuer: C=US, ST=California, L=Sunnyvale, O=Google, OU=Certificate Authority, CN=support, [email protected] * SSL certificate verify result: unable to get local issuer certificate (20), continuing anyway. > POST /gportal/gpmgr HTTP/1.1^M Host: 10.10.101.12^M Accept: */*^M Accept-Encoding: gzip,deflate^M Content-Length: 1623^M Content-Type: application/x-www-form-urlencoded^M Expect: 100-continue^M ^M < HTTP/1.1 100 Continue^M < HTTP/1.1 200 OK^M < Date: Wed, 28 Apr 2010 21:56:15 GMT^M < Server: Apache^M < Cache-Control: no-cache^M < Pragma: no-cache^M < Vary: Accept-Encoding^M < Content-Encoding: gzip^M < Content-Length: 1453^M < Content-Type: application/json^M < ^M * Connection #0 to host 10.10.101.12 left intact * Closing connection #0 My CURL options are as under: $ch = curl_init(); $devnull = fopen('/tmp/curlcookie.txt', 'w'); $fp_err = fopen('/tmp/verbose_file.txt', 'ab+'); fwrite($fp_err, date('Y-m-d H:i:s')."\n\n"); curl_setopt($ch, CURLOPT_STDERR, $devnull); curl_setopt($ch, CURLOPT_POST, 1); curl_setopt($ch, CURLOPT_URL, $desturl); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false); curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, false); curl_setopt($ch, CURLOPT_HEADER, false); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 0); curl_setopt($ch, CURLOPT_CONNECTTIMEOUT,120); curl_setopt($ch, CURLOPT_AUTOREFERER, true); curl_setopt($ch, CURLOPT_ENCODING, 'gzip,deflate'); curl_setopt($ch, CURLOPT_POSTFIELDS, $postdata); curl_setopt($ch, CURLOPT_VERBOSE,1); curl_setopt($ch, CURLOPT_FAILONERROR, true); curl_setopt($ch, CURLOPT_STDERR, $fp_err); $ret = curl_exec($ch); Anybody has any idea, why it works sometimes but fails mostly? Thanks

  Read the article

1