Search Results

Search found 2420 results on 97 pages for 'dir 655'.

Page 1/97 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Jumbo Frames on DIR-655

    - by Spookyone
    Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

    Read the article

  • Jumbo Frames on DIR-655

    - by Spookyone
    I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

    Read the article

  • HP 655 Notebook (Ubuntu 12.04) wireless internet disabled after running updates

    - by Bastian
    Today the update-manaeger suggested that I should download some updates. So I did. After the updates were installed I had to reboot the system. After the reboot my notebook doesn't see any wireless networks. I was looking for a long time on the internet for answers but non of them applies to my case. I have the idea, it has got something to do with the kernel I am currently using (Linux 3.2.0-55). Is this one new for Ubuntu 12.04? When I boot my system I can choose to use an older kernel (linux 3.2.0-32). When I use this one the notebook does see the wireless networks. This is my network card according to the command lspci: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Anyone an idea to fix my problems with wireless internet?

    Read the article

  • HP 655 notebook (ubuntu 12.04) keeps consuming energy after closing the lid

    - by Bastian van Binsbergen
    I am unable to change power settings so that when I close the lid the battery stops consuming energy. There are three options in the power settings menu: When the screen is closed: 1 Do nothing 2 Pause 3 Sleep First I could not change anything. I see all the options but I could not click on option 2 and 3. (grey text instead of black) I already made it possible to put in to sleep mode. But I can't pause (suspend) the laptop. Anyone an idea?

    Read the article

  • DLINK Dir-655 Sharing and connecting wirelessly

    - by CYREX
    I have a D-LINK DIR-655 and i wish to do the following: My PC is connected to the internet via eth0 (Wired) and it has a wireless card. I wish to connect to the DIR-655 Router and share my connection via the router but wirelessly. I do not want to connect via a cabled wired to the router. I want to connect to the router via wifi. After that i want to make the Router share the wireless connection am giving it to other PCs wirelessly. So the sharing and connecting in all PCs will be done via WiFi.

    Read the article

  • Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

    - by Mark C
    Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

    Read the article

  • Network Switch fast eneogh for Dlink DIR-655

    - by Recursion
    I am setting up a server and want to keep it outside of my local network which is inside of the Dlink 655 router. I originally bought the dlink router mainly because it is fast, much faster than any other consumer router I have tried. The only router which is capable of real 10MB/s d download speed. I need a switch which will not cause a bottle neck to the router. The switch will connect the to the server and the dlink router.

    Read the article

  • Connecting together DIR-615 and DIR-655

    - by ra170
    On my DIR-655 my internal network is: 192.168.0.x On my DIR-615 my internal network is: 192.168.1.x They are both connected to my firewall PIX 501 box The PIX itself is connected to the comcast modem. I briefly looked at the menu options on those router and they look similar, however I'm not sure what's the best way to connect those two together so that I can go between those networks. (printing, file browsing, etc.) I'm not sure if I have to do this somehow on those two router or on the PIX itself, or probably on all of them. If anyone has experience with something like that please let me know..

    Read the article

  • Can find any /.ecryptfs dir to retrieve my encrypted home dir

    - by Roberto de Armas
    At firs sorry for my english, it isn't my native languaje. I've readed some questions similar but no the exactly whith the same problem. I've moved my home directory to a separated partitión (Ubuntu 11.10) following this tutorial http://www.ubuntu-es.org/node/58233 After checking that they were all my files and folders (forgetting that one of dirs was encrypted by ecryptfs) i've installed fedora 16. Well, suprised when in my home folder was an Readme.txt advising me that my folder was unmounted for security reasons and proposing to type in comand line "ecryptfs-mount-Private" (din't work) or make click on labeled icon "acces your private data desktop" (neither din't work). After three days reading all i could find on the internet, i follow The Dustin Kirkland tutorial in http://blog.dustinkirkland.com/2011/04/introducing-ecryptfs-recover-private.html, but any /.ecryptfs was found. I'm sure that the data are somewere (the size of the moved dir is identical to the original one). Any help would by greatly appreciated. Thaks a lot.

    Read the article

  • Use mod_rewrite to redirect from example.com/dir to www.example.com/dir

    - by kavoir.com
    Assume / is the document root of my domain example.com. /.htaccess RewriteEngine on RewriteCond %{HTTP_HOST} ^golfcoursesd\.com$ [NC] RewriteRule ^(.*)$ http://www.golfcoursesd.com/$1 [R=301,L] /dir/.htaccess <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /dir/index.php [L] </IfModule> I know how to redirect example.com/dir to www.example.com/dir, because /.htaccess does the very job. However, the trick here is that I have to keep /dir/.htaccess to serve up virtual directories (such as /dir/state/AK/35827/ which aren't actual directories) if you know what I mean. Problem is, if I keep /dir/.htaccess, a request of: http://example.com/dir/state/AK/35827/ DOES NOT redirect to: http://www.example.com/dir/state/AK/35827/ as would: http://example.com/ redirect to: http://www.example.com/ Not sure if I made it clear. Basically, how to make http://example.com/dir/state/AK/35827/ correctly redirect to http://www.example.com/dir/state/AK/35827/ AND I can serve virtual URLs?

    Read the article

  • Why do two patterns (/.*) and (.*) match different strings? @per-directory (.htaccess) mod_rewrite RewriteRule

    - by Leftium
    Shouldn't the two patterns (/.*) and (.*) match the same string? My real question is actually: where did the "abc" go? Something funky seems to be happening inside the mod_rewrite engine... Given this .htaccess file in www/dir/: Options +FollowSymlinks RewriteEngine on RewriteRule (/.*) print_url_args.php?result=$1 A request for http://localhost/dir/abc/123/ results in: result ($1) = "/123/" $_REQUEST_URI = "/dir/abc/123/" If the / is removed from the pattern like RewriteRule (.*) print_url_args.php?result=$1 The same request for http://localhost/dir/abc/123/ results in: result ($1) = "print_url_args.php" $_REQUEST_URI = "/dir/abc/123/" update: posted rewrite log. 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (3) [perdir C:/db/www/dir/] add path info postfix: C:/db/www/dir/abc - C:/db/www/dir/abc/123/ 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (3) [perdir C:/db/www/dir/] strip per-dir prefix: C:/db/www/dir/abc/123/ - abc/123/ 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (3) [perdir C:/db/www/dir/] applying pattern '(/.*)$' to uri 'abc/123/' 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (2) [perdir C:/db/www/dir/] rewrite 'abc/123/' - 'print_url_args.php?result=/123/' 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (3) split uri=print_url_args.php?result=/123/ - uri=print_url_args.php, args=result=/123/ 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (3) [perdir C:/db/www/dir/] add per-dir prefix: print_url_args.php - C:/db/www/dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (2) [perdir C:/db/www/dir/] strip document_root prefix: C:/db/www/dir/print_url_args.php - /dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (1) [perdir C:/db/www/dir/] internal redirect with /dir/print_url_args.php [INTERNAL REDIRECT] 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#43833c8/initial/redir#1] (3) [perdir C:/db/www/dir/] strip per-dir prefix: C:/db/www/dir/print_url_args.php - print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#43833c8/initial/redir#1] (3) [perdir C:/db/www/dir/] applying pattern '(/.*)$' to uri 'print_url_args.php' 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#43833c8/initial/redir#1] (1) [perdir C:/db/www/dir/] pass through C:/db/www/dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (3) [perdir C:/db/www/dir/] add path info postfix: C:/db/www/dir/abc - C:/db/www/dir/abc/123/ 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (3) [perdir C:/db/www/dir/] strip per-dir prefix: C:/db/www/dir/abc/123/ - abc/123/ 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (3) [perdir C:/db/www/dir/] applying pattern '(.*)$' to uri 'abc/123/' 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (2) [perdir C:/db/www/dir/] rewrite 'abc/123/' - 'print_url_args.php?result=abc/123/' 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (3) split uri=print_url_args.php?result=abc/123/ - uri=print_url_args.php, args=result=abc/123/ 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (3) [perdir C:/db/www/dir/] add per-dir prefix: print_url_args.php - C:/db/www/dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (2) [perdir C:/db/www/dir/] strip document_root prefix: C:/db/www/dir/print_url_args.php - /dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (1) [perdir C:/db/www/dir/] internal redirect with /dir/print_url_args.php [INTERNAL REDIRECT] 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (3) [perdir C:/db/www/dir/] strip per-dir prefix: C:/db/www/dir/print_url_args.php - print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (3) [perdir C:/db/www/dir/] applying pattern '(.*)$' to uri 'print_url_args.php' 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (2) [perdir C:/db/www/dir/] rewrite 'print_url_args.php' - 'print_url_args.php?result=print_url_args.php' 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (3) split uri=print_url_args.php?result=print_url_args.php - uri=print_url_args.php, args=result=print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (3) [perdir C:/db/www/dir/] add per-dir prefix: print_url_args.php - C:/db/www/dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (1) [perdir C:/db/www/dir/] initial URL equal rewritten URL: C:/db/www/dir/print_url_args.php [IGNORING REWRITE]

    Read the article

  • Strange Windows DIR command behavior

    - by user1167442
    I discovered this quite by accident while looking for a file with a number in the name. When I type: dir *number* (where number represents any number from 0 to 9 and with no spaces between the asterisks and the number) at the cmd.exe command prompt, it returns various files do not appear in any to fit the search criteria. What's weird, is that depending on the directory, some numbers will work and not others. An example is, in a directory associated with a website, I type the following: dir *4* and what is returned is: Directory of C:\Ampps\www\includes\pages 04/30/2012 03:55 PM 153 inventory_list_retrieve.php 06/18/2012 11:17 AM 6,756 ix.html 06/19/2012 01:47 PM 257,501 jquery.1.7.1.js 3 File(s) 264,410 bytes 0 Dir(s) 362,280,906,752 bytes free That just doesn't make any sense to me. Any clue? The question is posed on stackOverflow because the DIR command is often combined with FOR in batch programs. The strange DIR behavior would seem to make batch programs potentially unreliable if they use the DIR command.

    Read the article

  • Bundler isn't loading gems

    - by Garrett
    I have been having a problem with using Bundler and being able to access my gems without having to require them somewhere, as config.gem used to do that for me (as far as I know). In my Rails 3 app, I defined my Gemfile like so: clear_sources source "http://gemcutter.org" source "http://gems.github.com" bundle_path "vendor/bundler_gems" ## Bundle edge rails: git "git://github.com/rails/arel.git" git "git://github.com/rails/rack.git" gem "rails", :git => "git://github.com/rails/rails.git" ## Bundle gem "mongo_mapper", :git => "git://github.com/jnunemaker/mongomapper.git" gem "bluecloth", ">= 2.0.0" Then I run gem bundle, it bundles it all up like expected. Inside the environment.rb file that is included within boot.rb it looks like this: # DO NOT MODIFY THIS FILE module Bundler file = File.expand_path(__FILE__) dir = File.dirname(file) ENV["PATH"] = "#{dir}/../../../../bin:#{ENV["PATH"]}" ENV["RUBYOPT"] = "-r#{file} #{ENV["RUBYOPT"]}" $LOAD_PATH.unshift File.expand_path("#{dir}/gems/builder-2.1.2/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/builder-2.1.2/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/text-hyphen-1.0.0/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/text-hyphen-1.0.0/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/i18n-0.3.3/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/i18n-0.3.3/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/arel/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/arel/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/activemodel/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/activemodel/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/jnunemaker-validatable-1.8.1/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/jnunemaker-validatable-1.8.1/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/abstract-1.0.0/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/abstract-1.0.0/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/erubis-2.6.5/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/erubis-2.6.5/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/mime-types-1.16/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/mime-types-1.16/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/mail-2.1.2/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/mail-2.1.2/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/rake-0.8.7/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/rake-0.8.7/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/railties/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/railties/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/memcache-client-1.7.7/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/memcache-client-1.7.7/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rack/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rack/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/rack-test-0.5.3/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/rack-test-0.5.3/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/rack-mount-0.4.5/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/rack-mount-0.4.5/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/actionpack/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/actionpack/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/bluecloth-2.0.7/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/bluecloth-2.0.7/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/bluecloth-2.0.7/ext") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/activerecord/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/activerecord/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/text-format-1.0.0/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/text-format-1.0.0/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/actionmailer/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/actionmailer/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/tzinfo-0.3.16/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/tzinfo-0.3.16/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/activesupport/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/activesupport/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/activeresource/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/activeresource/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/rails/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/mongo-0.18.2/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/gems/mongo-0.18.2/lib") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/mongomapper/bin") $LOAD_PATH.unshift File.expand_path("#{dir}/dirs/mongomapper/lib") @gemfile = "#{dir}/../../../../Gemfile" require "rubygems" unless respond_to?(:gem) # 1.9 already has RubyGems loaded @bundled_specs = {} @bundled_specs["builder"] = eval(File.read("#{dir}/specifications/builder-2.1.2.gemspec")) @bundled_specs["builder"].loaded_from = "#{dir}/specifications/builder-2.1.2.gemspec" @bundled_specs["text-hyphen"] = eval(File.read("#{dir}/specifications/text-hyphen-1.0.0.gemspec")) @bundled_specs["text-hyphen"].loaded_from = "#{dir}/specifications/text-hyphen-1.0.0.gemspec" @bundled_specs["i18n"] = eval(File.read("#{dir}/specifications/i18n-0.3.3.gemspec")) @bundled_specs["i18n"].loaded_from = "#{dir}/specifications/i18n-0.3.3.gemspec" @bundled_specs["arel"] = eval(File.read("#{dir}/specifications/arel-0.2.pre.gemspec")) @bundled_specs["arel"].loaded_from = "#{dir}/specifications/arel-0.2.pre.gemspec" @bundled_specs["activemodel"] = eval(File.read("#{dir}/specifications/activemodel-3.0.pre.gemspec")) @bundled_specs["activemodel"].loaded_from = "#{dir}/specifications/activemodel-3.0.pre.gemspec" @bundled_specs["jnunemaker-validatable"] = eval(File.read("#{dir}/specifications/jnunemaker-validatable-1.8.1.gemspec")) @bundled_specs["jnunemaker-validatable"].loaded_from = "#{dir}/specifications/jnunemaker-validatable-1.8.1.gemspec" @bundled_specs["abstract"] = eval(File.read("#{dir}/specifications/abstract-1.0.0.gemspec")) @bundled_specs["abstract"].loaded_from = "#{dir}/specifications/abstract-1.0.0.gemspec" @bundled_specs["erubis"] = eval(File.read("#{dir}/specifications/erubis-2.6.5.gemspec")) @bundled_specs["erubis"].loaded_from = "#{dir}/specifications/erubis-2.6.5.gemspec" @bundled_specs["mime-types"] = eval(File.read("#{dir}/specifications/mime-types-1.16.gemspec")) @bundled_specs["mime-types"].loaded_from = "#{dir}/specifications/mime-types-1.16.gemspec" @bundled_specs["mail"] = eval(File.read("#{dir}/specifications/mail-2.1.2.gemspec")) @bundled_specs["mail"].loaded_from = "#{dir}/specifications/mail-2.1.2.gemspec" @bundled_specs["rake"] = eval(File.read("#{dir}/specifications/rake-0.8.7.gemspec")) @bundled_specs["rake"].loaded_from = "#{dir}/specifications/rake-0.8.7.gemspec" @bundled_specs["railties"] = eval(File.read("#{dir}/specifications/railties-3.0.pre.gemspec")) @bundled_specs["railties"].loaded_from = "#{dir}/specifications/railties-3.0.pre.gemspec" @bundled_specs["memcache-client"] = eval(File.read("#{dir}/specifications/memcache-client-1.7.7.gemspec")) @bundled_specs["memcache-client"].loaded_from = "#{dir}/specifications/memcache-client-1.7.7.gemspec" @bundled_specs["rack"] = eval(File.read("#{dir}/specifications/rack-1.1.0.gemspec")) @bundled_specs["rack"].loaded_from = "#{dir}/specifications/rack-1.1.0.gemspec" @bundled_specs["rack-test"] = eval(File.read("#{dir}/specifications/rack-test-0.5.3.gemspec")) @bundled_specs["rack-test"].loaded_from = "#{dir}/specifications/rack-test-0.5.3.gemspec" @bundled_specs["rack-mount"] = eval(File.read("#{dir}/specifications/rack-mount-0.4.5.gemspec")) @bundled_specs["rack-mount"].loaded_from = "#{dir}/specifications/rack-mount-0.4.5.gemspec" @bundled_specs["actionpack"] = eval(File.read("#{dir}/specifications/actionpack-3.0.pre.gemspec")) @bundled_specs["actionpack"].loaded_from = "#{dir}/specifications/actionpack-3.0.pre.gemspec" @bundled_specs["bluecloth"] = eval(File.read("#{dir}/specifications/bluecloth-2.0.7.gemspec")) @bundled_specs["bluecloth"].loaded_from = "#{dir}/specifications/bluecloth-2.0.7.gemspec" @bundled_specs["activerecord"] = eval(File.read("#{dir}/specifications/activerecord-3.0.pre.gemspec")) @bundled_specs["activerecord"].loaded_from = "#{dir}/specifications/activerecord-3.0.pre.gemspec" @bundled_specs["text-format"] = eval(File.read("#{dir}/specifications/text-format-1.0.0.gemspec")) @bundled_specs["text-format"].loaded_from = "#{dir}/specifications/text-format-1.0.0.gemspec" @bundled_specs["actionmailer"] = eval(File.read("#{dir}/specifications/actionmailer-3.0.pre.gemspec")) @bundled_specs["actionmailer"].loaded_from = "#{dir}/specifications/actionmailer-3.0.pre.gemspec" @bundled_specs["tzinfo"] = eval(File.read("#{dir}/specifications/tzinfo-0.3.16.gemspec")) @bundled_specs["tzinfo"].loaded_from = "#{dir}/specifications/tzinfo-0.3.16.gemspec" @bundled_specs["activesupport"] = eval(File.read("#{dir}/specifications/activesupport-3.0.pre.gemspec")) @bundled_specs["activesupport"].loaded_from = "#{dir}/specifications/activesupport-3.0.pre.gemspec" @bundled_specs["activeresource"] = eval(File.read("#{dir}/specifications/activeresource-3.0.pre.gemspec")) @bundled_specs["activeresource"].loaded_from = "#{dir}/specifications/activeresource-3.0.pre.gemspec" @bundled_specs["rails"] = eval(File.read("#{dir}/specifications/rails-3.0.pre.gemspec")) @bundled_specs["rails"].loaded_from = "#{dir}/specifications/rails-3.0.pre.gemspec" @bundled_specs["mongo"] = eval(File.read("#{dir}/specifications/mongo-0.18.2.gemspec")) @bundled_specs["mongo"].loaded_from = "#{dir}/specifications/mongo-0.18.2.gemspec" @bundled_specs["mongo_mapper"] = eval(File.read("#{dir}/specifications/mongo_mapper-0.6.10.gemspec")) @bundled_specs["mongo_mapper"].loaded_from = "#{dir}/specifications/mongo_mapper-0.6.10.gemspec" def self.add_specs_to_loaded_specs Gem.loaded_specs.merge! @bundled_specs end def self.add_specs_to_index @bundled_specs.each do |name, spec| Gem.source_index.add_spec spec end end add_specs_to_loaded_specs add_specs_to_index def self.require_env(env = nil) context = Class.new do def initialize(env) @env = env && env.to_s ; end def method_missing(*) ; yield if block_given? ; end def only(*env) old, @only = @only, _combine_only(env.flatten) yield @only = old end def except(*env) old, @except = @except, _combine_except(env.flatten) yield @except = old end def gem(name, *args) opt = args.last.is_a?(Hash) ? args.pop : {} only = _combine_only(opt[:only] || opt["only"]) except = _combine_except(opt[:except] || opt["except"]) files = opt[:require_as] || opt["require_as"] || name files = [files] unless files.respond_to?(:each) return unless !only || only.any? {|e| e == @env } return if except && except.any? {|e| e == @env } if files = opt[:require_as] || opt["require_as"] files = Array(files) files.each { |f| require f } else begin require name rescue LoadError # Do nothing end end yield if block_given? true end private def _combine_only(only) return @only unless only only = [only].flatten.compact.uniq.map { |o| o.to_s } only &= @only if @only only end def _combine_except(except) return @except unless except except = [except].flatten.compact.uniq.map { |o| o.to_s } except |= @except if @except except end end context.new(env && env.to_s).instance_eval(File.read(@gemfile), @gemfile, 1) end end module Gem @loaded_stacks = Hash.new { |h,k| h[k] = [] } def source_index.refresh! super Bundler.add_specs_to_index end end But when I try to access any of my gems, e.g. MongoMapper, Paperclip, Haml, etc. I get: NameError: uninitialized constant MongoMapper The same goes for any other gem. Does Bundler not include gems like the old Rails 2.0 did? Or is something messed up with my system? Any help would be appreciated, thank you!

    Read the article

  • [Apache] mod_rewrite www.site.com/dir/ --> www.site.com/dir/2009/

    - by Casey
    I'm having trouble with this rewrite. I've never really used mod_rewrite before and don't have much experience with regex. Any help is appreciated! <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on #prevent nested looping RewriteCond %{ENV:REDIRECT_STATUS} ^$ #re-route incoming requests RewriteRule ^(.*)$ %{REQUEST_URI}2009/$1 [L,NE] </IfModule> This partially works, http://www.site.com/dir/ is routed to http://www.site.com/dir/2009/ but a request like http://www.site.com/dir/css/theme.css fails. I'm hoping to rewrite all requests to the parent directory into the 2009 subdirectory but I keep encountering infinite loops and server errors messages. I haven't found any useful examples out there. I figured this would be a common rewrite... Thanks in advance!

    Read the article

  • DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

    - by Kev
    I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

    Read the article

  • On Windows 7, dir or tree can't show unicode characters, even starting cmd with cmd /U

    - by Jian Lin
    On Windows 7, dir or tree can't show unicode characters, even starting cmd with cmd /U So I would press Window Key + R to run something, and type in cmd /U so that the content might handle Unicode. And then using dir or tree /F, the content in Unicode won't show as Unicode. (in Window Explorer (file manager), the Unicode will show) Is there a way to handle it? To get Unicode characters to test your filenames, you can go to http://news.google.com/news?edchanged=1&ned=tw and you will be able to get many Unicode characters there (UTF-8)

    Read the article

  • On Windows 7, dir or tree can't show unicode characters, even starting cmd with cmd /U

    - by ????
    On Windows 7, dir or tree can't show unicode characters, even starting cmd with cmd /U So I would press Window Key + R to run something, and type in cmd /U so that the content might handle Unicode. And then using dir or tree /F, the content in Unicode won't show as Unicode. (in Window Explorer (file manager), the Unicode will show) Is there a way to handle it? To get Unicode characters to test your filenames, you can go to http://news.google.com/news?edchanged=1&ned=tw and you will be able to get many Unicode characters there (UTF-8)

    Read the article

  • DIR filenames that contain extensions

    - by Synetech
    I was just trying to check a dump-directory for any ZIP programs like PeaZip, NanoZip, etc. and ran into an odd problem that I have seen only a few times before. I used the following command to list files whose filenames contain zip (e.g., nanozip.zip, peazip2.rar, winzip-beta.exe, etc.): dir *zip* This listed any files whose filenames contain zip, but also all files with a .zip extension (e.g., foobar.zip). I then tried the following: dir *zip*.* This gave the same results. Does anyone know of a way to get the expected results? (I know that for may be able to do it, but the output won’t be correct.)

    Read the article

  • MBPro, mid 2010 can't see Dlink DIR655 signal after sleep etc

    - by user88114
    This is my son's MBP 7,1 running Snow Leopard 10.6.7. Router signal is fine since iPad, Wintel on same table 20 feet from router are fine. the MBP however frequently wakes and fails to find the internet. iStumbler can see 1 neighbours hub and my garden hub are there but can't get to the normal DIR655 wifi... no ping no en0 or en1 device seems to exist. Airport off and on does not help. He just resets router and it all works but this does not please me! I must admit the winter sometimes seems to loose connect too, but less so. The DIR655 (hardware rev A3) is on the original EU firmware 1.10, I'm cautious about jumping to latest 1.31EU since no downgrade seems to be possible and that feels a bit risky as so much is set up and working fine. If I use the DIR655 admin web and release the lease the MBP has then wake it all worked OK. So I suspect lease timing/locking issue but unsure how to check up, plus why iStumbler seems to say the network is not visible at all when I sit on the iPad right next to it just fine.. I do not think there are any channel overlaps and we also have RFquiet DECT phones (Orchid) that are silent until lifted or called. Anyway signals all show low interference and high throughput except for this failure to connect. Just walked the MBP to the garden office and iStumbler now sees the more distant DIR655 signal although it will not connect to it (does not show under Sys Prefs NetNetwork names) even after airport off & on... It also refuses to connect to my garden network (an old Belkin acting as AP wired to DIR655), the signal it can see and even net name in Sys Prefs NetNetwork names (2 mins later):NOW both names ARE visible, but both fail to accept the correct WPA2 password and keep asking again after failing to connect. IT ALL MAKES NO SENSE TO ME. Just revoked the lease for the MBP on DIR655 and no changes although this seemed to help MBP wake into connection 1 hour ago. OK a bit of walking about to report. Carried MBP across garden towards DIR655, a few other wifis show up on iStumbler, low signals all channel 1. Right next to DIR655 but iStumbler not showing it, although most other wifi's have gone. I'd say iStubler is suffering timeouts&hangs but hard to be sure. Lots of attempts to Airport on/off, join other etc and suddenly I get to connect, get given new IP (I revoked), can browse. Walk away, connection drops quite soon at 30 feet then reconnected briefly then died again. MUST ATTEND ELSEWHERE FOR A BIT...

    Read the article

  • MS-Access nested DIR - check if a file exists elsewhere whilst looping through a folder

    - by David Carle
    I have used the DIR() command in Microsoft Access 2003 to loop through the files in folder A. This works fine, but I need to check if each file also exists in another location (folder B), and only process the file if it doesn't exist in folder B. The problem is that checking for the file existing in folder B also uses the DIR() function and this then resets or confuses the original one, with the result that no further files are found in folder A. Is there a way to check if a file exists without using DIR? Or, is there a way to have a separate instance of DIR? I suppose I could build a list of the files in folder A into an array and then process the entries in the array, but this seems rather 'clunky' Any suggestions for a better solution? Thanks

    Read the article

  • pix 501, static route to d-link router (different subnet)

    - by ra170
    I have pix 501 cisco firewall with internal ip 192.168.10.1. I have connected d-link router (dir-655) to pix 501. The d-link router has internal ip 192.168.0.1 The picture would like something like that: |pix 501| has 192.168.10.1 ip |DIR-655| has 192.168.0.1 ip 1. |cable modem|----|pix 501|-------|DIR-655|-----PC 2. PC--------|pix 501|---------|DIR-655| | | |cable modem| When I'm on the wireless network (dir-655) with assigned ip of 192.168.0.x I can cross the subnet and connect to my firewall 192.168.10.1. (pic. 1) The problem is that if I'm on the 192.168.10.x network I can't connect to anything over at 192.168.0.x network. (pic.2) I've tried entering a static route like this: `route inside 192.168.0.0 255.255.255.0 192.168.10.1 1` I also tried assigning static ip to wan interface on DIR-655 to 192.168.10.30 and then tried this: route inside 192.168.0.0 255.255.255.0 192.168.10.30 1 But still, can't connect to 192.168.0.1 or anything on that subnet. Is there a way to setup a static route? Would adding a separate router between PIX 501 and DIR-655 help? I would think that static route like this should take care of it, but it doesn't. This is my route config and nat: (config)# sh route outside 0.0.0.0 0.0.0.0 (outside_IP) 1 DHCP static outside (outside_IP) 255.255.248.0 (outside_IP) 1 CONNECT static inside 192.168.0.0 255.255.255.0 192.168.10.1 1 OTHER static inside 192.168.10.0 255.255.255.0 192.168.10.1 1 CONNECT static or (route inside 192.168.0.0 255.255.255.0 192.168.10.30 1) (config)# sh nat nat (inside) 1 192.168.1.0 255.255.255.0 0 0 nat (inside) 1 192.168.10.0 255.255.255.0 0 0 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 I ended up turning DIR-655 into an Access Point (turning off DHCP and pluging cable from PIX lan interface into one of the LAN interfaces on DIR-655, and leaving WAN port empty), that works as far as DIR-655 being on the same subnet now, and I can access every machine. However the question is, why can't I simply route between those two? would router between these two help? One of the reasons is, that the PIX 501 has only 10 licences, so now I'm using almost all of them. (I have few computers, iphones, ps3, print server, etc.) I would really appreciate some help! Thanks.

    Read the article

  • Dir all files to output.log, including message "File Not Found"

    - by user316687
    I'm trying to dir a bunch of files with dos command: dir My dir.bat file: dir E:\documentos\57\Asiento\01\"Asiento 3 Modificacion de Estatuto.doc" dir E:\documentos\134\Asiento\01\"File Does Not Exist.doc" dir E:\documentos\55\Asiento\01\"Asiento 5 Padron de Afiliados Segunda Entrega.doc" The second one doesn't exist. Then, when running my bat: C:\myuser>E:\dir.bat > output.log I open output.log and don't find any message about the file that was not found. Output.log : E:\documentos>dir E:\documentos\57\Asiento\01\"Asiento 3 Modificacion de Estatuto.doc" Volume in drive E is New Volume Volume Serial Number is 0027-F7F6 Directory of E:\documentos\57\Asiento\01 20/12/2005 06:41 p.m. 40,960 Asiento 3 Modificacion de Estatuto.doc 1 File(s) 40,960 bytes 0 Dir(s) 17,053,155,328 bytes free E:\documentos>dir E:\documentos\134\Asiento\01\"File Does Not Exist.doc" Volume in drive E is New Volume Volume Serial Number is 0027-F7F6 Directory of E:\documentos\134\Asiento\01 E:\documentos>dir E:\documentos\55\Asiento\01\"Asiento 5 Padron de Afiliados Segunda Entrega.doc" Volume in drive E is New Volume Volume Serial Number is 0027-F7F6 Directory of E:\documentos\55\Asiento\01 08/08/2007 08:33 a.m. 40,960 Asiento 5 Padron de Afiliados Segunda Entrega.doc 1 File(s) 40,960 bytes 0 Dir(s) 17,053,151,232 bytes free Is there any way that output.log shows "File Not Found" message?

    Read the article

  • Scripts help FIND command via atime output to multiple files

    - by sswagner
    here is a script I have wrote that I need help with. in the script I do a find for any file that has not been access for over 30 days, 60, 90, 180, 270 & 365 days. This works just fine. however, this takes a few days just to finish the 30 day portion. it is scanning a NAS. (millions and millions of files) as you see, the 30 day information really holds all the data need for the rest of the scripts. the 60, 90, etc. portion of the script are just redoing the same effort as the 30 day portion, except for an extended time frame. it would save in this case weeks worth of re-scanning if some how the 60, 90 180, etc.. portions could just get its data from the 30 day output. this is where I am asking for help. the output is just like an ls -l command. and you can also see from the output below, there are multiple years in this output. the script is attached and printed below. total 24 -rw-r--r-- 1 root bin 60 Apr 12 13:07 config_file -rw-r--r-- 1 root bin 9 Apr 12 13:07 config_file.InProgress -rw-r--r-- 1 root bin 0 Apr 12 13:07 config_file.sids -rw-r--r-- 1 root bin 1284 Apr 19 10:41 rpt_file -rw-r--r-- 1 16074 5003 20083 Apr 26 2002 /nas/quota/slot_2/CR_APP002/eb_ora_bin1/sun8/product/9.2s/oem_webstage/oracle/sysman/qtour/console/dat1_01.gif -rw-r--r-- 1 16074 5003 20088 Apr 26 2002 /nas/quota/slot_2/CR_APP002/eb_ora_bin1/sun8/product/9.2s/oem_webstage/oracle/sysman/qtour/console/set1_04.gif -rw-r--r-- 1 16074 5003 2008 Apr 26 2002 /nas/quota/slot_2/CR_APP002/eb_ora_bin1/sun8/product/9.2s/oem_webstage/oracle/sysman/qtour/oapps/get2_03.htm -rw-r--r-- 1 16074 5003 20083 Apr 26 2002 /nas/quota/slot_2/CR_APP002/eb_ora_bin1/sun8/product/9.2s/oem_webstage/oracle/sysman/qtour/oapps/per1_01.gif any help is appreciated. these are linux distro boxes, so I am sure perl is on there too if needed.. Thanks! !/bin/ksh # search shares for files that have not been accessed for a certain time. NOTE: $IN = input search $OUT = output directory for text file # TESTS Numeric arguments can be specified as # +n for greater than n, -n for less than n, n for exactly n. # -atime n File was last accessed n*24 hours ago. # # IN1=/nas/quota/slot_2/CR* IN2=/nas/quota/slot_3/CR* IN3=/nas/quota/slot_4/CR* IN4=/nas/quota/slot_5/CR* OUT=/nas/quota/slot_3/CR_PRJ144/steve mkdir ${OUT} for dir in ${IN1}; do find $dir -atime +30 -exec ls -l '{}' \; ${OUT}/30days.txt; done for dir in ${IN2}; do find $dir -atime +30 -exec ls -l '{}' \; ${OUT}/30days.txt; done for dir in ${IN3}; do find $dir -atime +30 -exec ls -l '{}' \; ${OUT}/30days.txt; done for dir in ${IN4}; do find $dir -atime +30 -exec ls -l '{}' \; ${OUT}/30days.txt; done for dir in ${IN1}; do find $dir -atime +60 -exec ls -l '{}' \; ${OUT}/60days.txt; done for dir in ${IN2}; do find $dir -atime +60 -exec ls -l '{}' \; ${OUT}/60days.txt; done for dir in ${IN3}; do find $dir -atime +60 -exec ls -l '{}' \; ${OUT}/60days.txt; done for dir in ${IN4}; do find $dir -atime +60 -exec ls -l '{}' \; ${OUT}/60days.txt; done for dir in ${IN1}; do find $dir -atime +90 -exec ls -l '{}' \; ${OUT}/90days.txt; done for dir in ${IN2}; do find $dir -atime +90 -exec ls -l '{}' \; ${OUT}/90days.txt; done for dir in ${IN3}; do find $dir -atime +90 -exec ls -l '{}' \; ${OUT}/90days.txt; done for dir in ${IN4}; do find $dir -atime +90 -exec ls -l '{}' \; ${OUT}/90days.txt; done for dir in ${IN1}; do find $dir -atime +180 -exec ls -l '{}' \; ${OUT}/180days.txt; done for dir in ${IN2}; do find $dir -atime +180 -exec ls -l '{}' \; ${OUT}/180days.txt; done for dir in ${IN3}; do find $dir -atime +180 -exec ls -l '{}' \; ${OUT}/180days.txt; done for dir in ${IN4}; do find $dir -atime +180 -exec ls -l '{}' \; ${OUT}/180days.txt; done for dir in ${IN1}; do find $dir -atime +270 -exec ls -l '{}' \; ${OUT}/270days.txt; done for dir in ${IN2}; do find $dir -atime +270 -exec ls -l '{}' \; ${OUT}/270days.txt; done for dir in ${IN3}; do find $dir -atime +270 -exec ls -l '{}' \; ${OUT}/270days.txt; done for dir in ${IN4}; do find $dir -atime +270 -exec ls -l '{}' \; ${OUT}/270days.txt; done for dir in ${IN1}; do find $dir -atime +365 -exec ls -l '{}' \; ${OUT}/365days.txt; done for dir in ${IN2}; do find $dir -atime +365 -exec ls -l '{}' \; ${OUT}/365days.txt; done for dir in ${IN3}; do find $dir -atime +365 -exec ls -l '{}' \; ${OUT}/365days.txt; done for dir in ${IN4}; do find $dir -atime +365 -exec ls -l '{}' \; ${OUT}/365days.txt; done

    Read the article

  • find, excluding dir, not descending into dir, AND using maxdepth and mindepth

    - by user1680819
    This is RHEL 5.6 and GNU find 4.2.27. I am trying to exclude a directory from find, and want to make sure that directory isn't descended into. I've seen plenty of posts saying -prune will do this - and it does. I can run this command: find . -type d -name "./.snapshot*" -prune -o -print and it works. I run it through strace and verify it is NOT descending into .snapshot. I also want to find directories ONLY at a certain level. I can use mindepth and maxdepth to do this: find . -maxdepth 8 -mindepth 8 -type d and it gives me all the dirs 8 levels down, including what's in .snapshot. If I combine the prune and mindepth and maxdepth options: find . -maxdepth 8 -mindepth 8 -type d \( -path "./.snapshot/*" -prune -o -print \) the output is right - I see all the dirs 8 levels down except for what's in .snapshot, but if I run that find through strace, I see that .snapshot is still being descended into - to levels 1 through 8. I've tried a variety of different combinations, moving the precedence parens around, reording expression components - everything that yields the right output still descends into .snapshot. I see in the man page that -prune doesn't work with -depth, but doesn't say anything about mindepth and maxdepth. Can anyone offer any advice? Thanks... Bill

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >