Search Results

Search found 328 results on 14 pages for 'dst'.

Page 1/14 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Why i disconnect every few seconds? using USB wireless adapter

    - by Rev3rse
    i know it's for ubuntu questions..but mint and ubuntu are very similiar and i had the same problem with linux ubuntu too..so i think this is the right place for my question anyway i don't have experience with drivers and other things,after installing Linux on my machine( i did dist-upgrade btw) everything seem to be great because i didn't have to install any driver, after a while i realized that my connection stop after few minutes(actually it shows that I'm connected but it's not) so i have to reconnect and after few minutes it disconnect again. I'm using Alfa USB wireless adapter AWS036H, and my Linux version is 11 i think the driver i'm using is Realtek i searched in the Internet and i found nothing. these are some outputs of few things people usually ask for: Note: I'm NOT using a laptop. dmsg: [19445.604448] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=2.174.220.77 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=104 ID=10466 DF PROTO=TCP SPT=55150 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19448.164050] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=41982 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=7566 DF PROTO=TCP INCOMPLETE [8 bytes] ] [19465.079565] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=80.128.216.31 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=5100 DF PROTO=TCP SPT=50169 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19486.270328] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=90.130.13.122 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=109 ID=22207 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19497.480522] wlan0: deauthenticating from 00:24:c8:4b:46:e0 by local choice (reason=3) [19497.593276] cfg80211: All devices are disconnected, going to restore regulatory settings [19497.593282] cfg80211: Restoring regulatory settings [19497.593346] cfg80211: Calling CRDA to update world regulatory domain [19497.638740] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [19497.638745] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638749] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [19497.638753] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638756] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [19497.638760] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638763] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [19497.638766] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638770] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [19497.638773] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638776] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [19497.638780] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638783] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [19497.638787] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638790] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [19497.638794] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638797] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [19497.638801] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638804] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [19497.638807] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638811] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [19497.638814] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638817] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [19497.638821] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638824] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [19497.638828] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638831] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [19497.638835] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [19497.638838] cfg80211: World regulatory domain updated: [19497.638841] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [19497.638845] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [19497.638848] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [19497.638852] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [19497.638855] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [19497.638859] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [19513.145150] wlan0: authenticate with 00:24:c8:4b:46:e0 (try 1) [19513.146910] wlan0: authenticated [19513.252775] wlan0: associate with 00:24:c8:4b:46:e0 (try 1) [19513.255149] wlan0: RX AssocResp from 00:24:c8:4b:46:e0 (capab=0x411 status=0 aid=2) [19513.255154] wlan0: associated [19515.675091] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=91.79.8.40 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x20 TTL=110 ID=42720 DF PROTO=TCP SPT=1945 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [19525.684312] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=78.13.80.169 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=109 ID=49890 DF PROTO=TCP SPT=53401 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 [19551.856766] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=85.228.39.93 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=103 ID=1162 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19564.623005] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=90.202.21.238 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=17881 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19584.855364] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=2.49.151.87 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=31716 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19604.688647] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=109.225.124.155 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=6656 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19626.362529] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=81.184.50.41 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=23241 DF PROTO=TCP SPT=1416 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [19645.040906] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=92.250.245.244 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=51 ID=0 DF PROTO=TCP SPT=50061 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 [19665.212659] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=87.183.3.18 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=111 ID=1689 DF PROTO=TCP SPT=62817 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19685.036415] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=78.13.80.169 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=109 ID=50638 DF PROTO=TCP SPT=49624 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 [19705.487915] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=217.122.17.82 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=112 ID=19070 DF PROTO=TCP SPT=54795 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19726.779185] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=80.88.116.239 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=109 ID=32168 DF PROTO=TCP SPT=57330 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19744.755673] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=109.124.5.43 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=2288 DF PROTO=TCP SPT=6475 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [19764.449183] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=79.216.35.19 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=4281 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19784.456189] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=81.82.25.149 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=114 ID=1866 DF PROTO=TCP SPT=59507 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19804.836687] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=81.56.199.3 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=108 ID=14749 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19824.812685] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=186.28.7.159 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=107 ID=44686 PROTO=UDP SPT=23418 DPT=6881 LEN=28 [19847.683314] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=78.13.80.169 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=108 ID=63046 DF PROTO=TCP SPT=52192 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 [19884.711455] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=84.146.24.238 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=27914 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19884.983589] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=2.107.130.61 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=7742 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19905.681078] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=95.21.11.121 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=31775 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19926.035707] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=109.76.132.55 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=28140 DF PROTO=TCP SPT=51905 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19945.668326] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=188.92.0.197 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=7865 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [19967.200339] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=83.252.102.172 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=105 ID=28408 DF PROTO=TCP SPT=63505 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [19999.752732] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=79.166.171.200 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=36405 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [20007.928719] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=79.235.59.16 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=46415 DF PROTO=TCP SPT=4537 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 [20026.181726] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=81.182.169.36 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=106 ID=25126 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [20048.845358] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=87.66.118.104 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=111 ID=18068 DF PROTO=TCP SPT=49928 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20064.341857] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=77.2.63.153 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=107 ID=7242 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [20090.093490] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=93.16.17.210 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=108 ID=894 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [20104.443995] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=89.83.235.99 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=114 ID=17295 DF PROTO=TCP SPT=58979 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20128.625374] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=81.62.91.79 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=107 ID=21793 DF PROTO=TCP SPT=51446 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20151.055506] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=84.135.217.213 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=112 ID=32452 DF PROTO=TCP SPT=55136 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20164.618874] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=91.79.8.40 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x20 TTL=110 ID=47784 DF PROTO=TCP SPT=2422 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [20184.337745] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=83.252.212.71 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=107 ID=14544 PROTO=UDP SPT=6881 DPT=6881 LEN=28 [20205.007512] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=91.62.158.247 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=21562 DF PROTO=TCP SPT=3933 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [20225.204018] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=84.146.24.238 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=113 ID=15045 DF PROTO=TCP SPT=49630 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20244.842290] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=82.82.190.168 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=23741 DF PROTO=TCP SPT=50766 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20266.701649] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=88.153.108.124 DST=192.168.1.6 LEN=48 TOS=0x02 PREC=0x00 TTL=111 ID=206 DF PROTO=TCP SPT=2451 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [20286.305414] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=78.240.86.73 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=107 ID=325 DF PROTO=TCP SPT=65184 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [20294.293989] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43133 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=56899 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20294.297015] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43134 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.40 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=12080 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20294.297242] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43135 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=25195 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20295.478338] wlan0: deauthenticating from 00:24:c8:4b:46:e0 by local choice (reason=3) [20295.552735] cfg80211: All devices are disconnected, going to restore regulatory settings [20295.552742] cfg80211: Restoring regulatory settings [20295.552748] cfg80211: Calling CRDA to update world regulatory domain [20295.680635] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [20295.680641] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680644] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [20295.680648] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680652] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [20295.680655] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680658] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [20295.680662] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680665] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [20295.680669] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680672] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [20295.680676] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680679] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [20295.680683] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680687] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [20295.680690] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680693] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [20295.680697] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680700] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [20295.680704] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680708] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [20295.680711] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680715] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [20295.680718] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680722] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [20295.680725] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680728] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [20295.680732] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [20295.680736] cfg80211: World regulatory domain updated: [20295.680738] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [20295.680742] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [20295.680745] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [20295.680749] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [20295.680752] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [20295.680756] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [20306.009341] wlan0: authenticate with 00:24:c8:4b:46:e0 (try 1) [20306.011225] wlan0: authenticated [20306.118095] wlan0: associate with 00:24:c8:4b:46:e0 (try 1) [20306.120963] wlan0: RX AssocResp from 00:24:c8:4b:46:e0 (capab=0x411 status=0 aid=2) [20306.120967] wlan0: associated [20307.364427] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=87.91.101.130 DST=192.168.1.6 LEN=64 TOS=0x00 PREC=0x00 TTL=49 ID=36839 DF PROTO=TCP SPT=62492 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [20310.914290] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43180 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=56900 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20310.936634] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43181 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.40 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=12081 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20310.939017] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43182 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=25196 DF PROTO=TCP INCOMPLETE [8 bytes] ] [20325.941050] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=217.118.78.99 DST=192.168.1.6 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=4407 PROTO=UDP SPT=2970 DPT=6881 LEN=28 [20328.801724] [UFW BLOCK] IN=wlan0 OUT= MAC=00:c0:ca:44:62:d1:00:24:c8:4b:46:e0:08:00 SRC=192.168.1.254 DST=192.168.1.6 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=43196 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.6 DST=91.189.88.33 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=56901 DF PROTO=TCP INCOMPLETE [8 bytes] ] ... inxi -N Network: Card-1 Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver r8169 Card-2 Realtek RTL-8139/8139C/8139C+ driver 8139too /usr/lib/linuxmint/mintWifi/mintWifi.py ------------------------- * I. scanning WIFI PCI devices... ------------------------- * II. querying ndiswrapper... ------------------------- * III. querying iwconfig... lo no wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"Home" Mode:Managed Frequency:2.437 GHz Access Point: 00:24:C8:4B:46:E0 Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=68/70 Signal level=-42 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:1132 Missed beacon:0 ------------------------- * IV. querying ifconfig... eth0 Link encap:Ethernet HWaddr 00:1f:d0:c9:b8:8e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x4000 eth1 Link encap:Ethernet HWaddr 00:0e:2e:77:88:16 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 Base address:0xd000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10696 errors:0 dropped:0 overruns:0 frame:0 TX packets:10696 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3823011 (3.8 MB) TX bytes:3823011 (3.8 MB) wlan0 Link encap:Ethernet HWaddr 00:c0:ca:44:62:d1 inet addr:192.168.1.6 Bcast:255.255.255.255 Mask:255.255.255.0 inet6 addr: fe80::2c0:caff:fe44:62d1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:90424 errors:0 dropped:0 overruns:0 frame:0 TX packets:65201 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:98024465 (98.0 MB) TX bytes:10345450 (10.3 MB) ------------------------- * V. querying DHCP... lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9400 GT] (rev a1) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) lsmod Module Size Used by ipt_REJECT 12512 1 ipt_LOG 12784 5 xt_limit 12541 7 xt_tcpudp 12531 8 ipt_addrtype 12535 4 xt_state 12514 7 ip6table_filter 12711 1 ip6_tables 22545 1 ip6table_filter nf_nat_irc 12542 0 nf_conntrack_irc 13138 1 nf_nat_irc nf_nat_ftp 12548 0 nf_nat 24827 2 nf_nat_irc,nf_nat_ftp nf_conntrack_ipv4 19024 9 nf_nat nf_defrag_ipv4 12649 1 nf_conntrack_ipv4 nf_conntrack_ftp 13106 1 nf_nat_ftp nf_conntrack 69744 7 xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp iptable_filter 12706 1 ip_tables 18125 1 iptable_filter x_tables 21907 10 ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,ipt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables nls_utf8 12493 10 udf 83795 1 crc_itu_t 12627 1 udf usb_storage 43946 1 uas 17676 0 snd_seq_dummy 12686 0 cryptd 19801 0 aes_i586 16956 1 aes_generic 38023 1 aes_i586 binfmt_misc 13213 1 dm_crypt 22463 0 vesafb 13449 1 nvidia 9766978 44 arc4 12473 2 rtl8187 56206 0 mac80211 257001 1 rtl8187 cfg80211 156212 2 rtl8187,mac80211 ppdev 12849 0 snd_hda_codec_realtek 255882 1 parport_pc 32111 1 psmouse 73312 0 eeprom_93cx6 12653 1 rtl8187 snd_hda_intel 24113 5 snd_hda_codec 90901 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13274 1 snd_hda_codec snd_pcm 80042 3 snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25269 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq joydev 17322 0 snd 55295 18 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device serio_raw 12990 0 soundcore 12600 1 snd snd_page_alloc 14073 2 snd_hda_intel,snd_pcm lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid dm_raid45 88410 0 xor 21860 1 dm_raid45 btrfs 527388 0 zlib_deflate 26594 1 btrfs libcrc32c 12543 1 btrfs 8139too 23208 0 8139cp 22497 0 r8169 42534 0 floppy 60032 0

    Read the article

  • understand SimpleTimeZone and DST Test

    - by Cygnusx1
    I Have an issue with the use of SimpleTimeZone class in Java. First, the JavaDoc is nice but not quite easy to understand in regards of the start and end Rules. But with the help of some example found on the web, i managed to get it right (i still don't understand why 8 represents the second week of a month in day_of_month!!! but whatever) Now i have written a simple Junit test to validate what i understand: package test; import static org.junit.Assert.assertEquals; import java.sql.Timestamp; import java.util.Calendar; import java.util.GregorianCalendar; import java.util.SimpleTimeZone; import org.apache.log4j.Logger; import org.junit.Test; public class SimpleTimeZoneTest { Logger log = Logger.getLogger(SimpleTimeZoneTest.class); @Test public void testTimeZoneWithDST() throws Exception { Calendar testDateEndOut = new GregorianCalendar(2012, Calendar.NOVEMBER, 4, 01, 59, 59); Calendar testDateEndIn = new GregorianCalendar(2012, Calendar.NOVEMBER, 4, 02, 00, 00); Calendar testDateStartOut = new GregorianCalendar(2012, Calendar.MARCH, 11, 01, 59, 59); Calendar testDateStartIn = new GregorianCalendar(2012, Calendar.MARCH, 11, 02, 00, 00); SimpleTimeZone est = new SimpleTimeZone(-5 * 60 * 60 * 1000, "EST"); est.setStartRule(Calendar.MARCH, 8, -Calendar.SUNDAY, 2 * 60 * 60 * 1000); est.setEndRule(Calendar.NOVEMBER, 1, Calendar.SUNDAY, 2 * 60 * 60 * 1000); Calendar theCal = new GregorianCalendar(est); theCal.setTimeInMillis(testDateEndOut.getTimeInMillis()); log.info(" Cal date = " + new Timestamp(theCal.getTimeInMillis()) + " : " + theCal.getTimeZone().getDisplayName()); log.info(" Cal use DST = " + theCal.getTimeZone().useDaylightTime()); log.info(" Cal In DST = " + theCal.getTimeZone().inDaylightTime(theCal.getTime())); log.info("offset = " + theCal.getTimeZone().getOffset(theCal.getTimeInMillis())); log.info("DTS offset= " + theCal.getTimeZone().getDSTSavings()); assertEquals("End date Should be In DST", true, theCal.getTimeZone().inDaylightTime(theCal.getTime())); theCal.setTimeInMillis(testDateEndIn.getTimeInMillis()); log.info(" Cal date = " + new Timestamp(theCal.getTimeInMillis()) + " : " + theCal.getTimeZone().getDisplayName()); log.info(" Cal use DST = " + theCal.getTimeZone().useDaylightTime()); log.info(" Cal In DST = " + theCal.getTimeZone().inDaylightTime(theCal.getTime())); log.info("offset = " + theCal.getTimeZone().getOffset(theCal.getTimeInMillis())); log.info("DTS offset= " + theCal.getTimeZone().getDSTSavings()); assertEquals("End date Should be Out DST", false, theCal.getTimeZone().inDaylightTime(theCal.getTime())); theCal.setTimeInMillis(testDateStartIn.getTimeInMillis()); log.info(" Cal date = " + new Timestamp(theCal.getTimeInMillis()) + " : " + theCal.getTimeZone().getDisplayName()); log.info(" Cal use DST = " + theCal.getTimeZone().useDaylightTime()); log.info(" Cal In DST = " + theCal.getTimeZone().inDaylightTime(theCal.getTime())); log.info("offset = " + theCal.getTimeZone().getOffset(theCal.getTimeInMillis())); log.info("DTS offset= " + theCal.getTimeZone().getDSTSavings()); assertEquals("Start date Should be in DST", true, theCal.getTimeZone().inDaylightTime(theCal.getTime())); theCal.setTimeInMillis(testDateStartOut.getTimeInMillis()); log.info(" Cal date = " + new Timestamp(theCal.getTimeInMillis()) + " : " + theCal.getTimeZone().getDisplayName()); log.info(" Cal use DST = " + theCal.getTimeZone().useDaylightTime()); log.info(" Cal In DST = " + theCal.getTimeZone().inDaylightTime(theCal.getTime())); log.info("offset = " + theCal.getTimeZone().getOffset(theCal.getTimeInMillis())); log.info("DTS offset= " + theCal.getTimeZone().getDSTSavings()); assertEquals("Start date Should be Out DST", false, theCal.getTimeZone().inDaylightTime(theCal.getTime())); } } Ok, i want to test the date limits to see if the inDaylightTime return the right thing! So, my rules are : DST start the second sunday of March at 2am DST end the first sunday of november at 2am In 2012 (now) this give us the march 11 at 2am and November 4 at 2am You can see my test dates are set properly!!! Well here is the output of my test run: 2012-11-01 18:22:44,344 INFO [test.SimpleTimeZoneTest] - < Cal date = 2012-11-04 01:59:59.0 : Eastern Standard Time> 2012-11-01 18:22:44,345 INFO [test.SimpleTimeZoneTest] - < Cal use DST = true> 2012-11-01 18:22:44,345 INFO [test.SimpleTimeZoneTest] - < Cal In DST = false> 2012-11-01 18:22:44,345 INFO [test.SimpleTimeZoneTest] - <offset = -18000000> 2012-11-01 18:22:44,345 INFO [test.SimpleTimeZoneTest] - <DTS offset= 3600000> My first assert just fails and tell me that 2012-11-04 01:59:59 is not inDST... !!!!??? If i put 2012-11-04 00:59:59, the test pass! This 1 hour gap just puzzle me... can anyone explain this behavior? Oh, btw, if anyone could elaborate on the : est.setStartRule(Calendar.MARCH, 8, -Calendar.SUNDAY, 2 * 60 * 60 * 1000); Why 8 means second week of march... and the -SUNDAY. I can't figure out this thing on a real calendar example!!! Thanks

    Read the article

  • 12.04lts: no network internet

    - by dgermann
    Friends-- Cannot connect reliably to ethernet nor at all to Internet: Symptoms: About 2 weeks ago did an upgrade. Have not been able to connect to ethernet nor Internet. Today, for example, boot up this System76 laptop and there was no network connection. Did sudo mount -a and got some internal network connectivity: doug@ubuntu:/sam$ ping earth PING earth (192.168.0.201) 56(84) bytes of data. 64 bytes from earth (192.168.0.201): icmp_req=1 ttl=64 time=0.160 ms 64 bytes from earth (192.168.0.201): icmp_req=2 ttl=64 time=0.177 ms 64 bytes from earth (192.168.0.201): icmp_req=3 ttl=64 time=0.159 ms ^C --- earth ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.159/0.165/0.177/0.013 ms doug@ubuntu:/sam$ ping doug2 PING doug (192.168.0.4) 56(84) bytes of data. ^C --- doug ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 1999ms doug@ubuntu:/sam$ ping sharon PING sharon (192.168.0.111) 56(84) bytes of data. 64 bytes from sharon (192.168.0.111): icmp_req=1 ttl=128 time=0.276 ms ^C --- sharon ping statistics --- 6 packets transmitted, 1 received, 83% packet loss, time 5031ms rtt min/avg/max/mdev = 0.276/0.276/0.276/0.000 ms doug@ubuntu:/sam$ ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 4999ms doug@ubuntu:/sam$ ping earth PING earth (192.168.0.201) 56(84) bytes of data. ^C --- earth ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4032ms doug@ubuntu:/sam$ ping yahoo.com ping: unknown host yahoo.com doug@ubuntu:/sam$ ping ubuntu.com ping: unknown host ubuntu.com doug@ubuntu:/sam$ ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 14 packets transmitted, 0 received, 100% packet loss, time 13103ms Note that earth is the cifs server, and one time pinging it worked, later failed. Clues: doug@ubuntu:/sam$ grep -i eth /var/log/syslog |tail Aug 23 15:32:46 ubuntu kernel: [ 5328.070401] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:32:48 ubuntu kernel: [ 5330.651139] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=19090 PROTO=2 Aug 23 15:34:51 ubuntu kernel: [ 5453.072279] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:34:55 ubuntu kernel: [ 5457.085433] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16137 PROTO=2 Aug 23 15:36:56 ubuntu kernel: [ 5578.074492] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:37:00 ubuntu kernel: [ 5582.359006] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16150 PROTO=2 Aug 23 15:39:01 ubuntu kernel: [ 5703.074410] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:39:03 ubuntu kernel: [ 5705.070122] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16163 PROTO=2 Aug 23 15:41:06 ubuntu kernel: [ 5828.074387] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:41:13 ubuntu kernel: [ 5835.319941] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=23298 PROTO=2 doug@ubuntu:/sam$ ifconfig -a eth0 Link encap:Ethernet HWaddr [BLANKED] inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21b:fcff:fe29:9dfc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3961 errors:0 dropped:0 overruns:0 frame:0 TX packets:2007 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:991204 (991.2 KB) TX bytes:252908 (252.9 KB) Interrupt:16 Base address:0xec00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2190 errors:0 dropped:0 overruns:0 frame:0 TX packets:2190 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:168052 (168.0 KB) TX bytes:168052 (168.0 KB) wlan0 Link encap:Ethernet HWaddr 00:19:d2:72:5a:0c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) doug@ubuntu:/sam$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. doug@ubuntu:/sam$ lsmod Module Size Used by des_generic 21191 0 md4 12523 0 nls_iso8859_1 12617 1 nls_cp437 12751 1 vfat 17308 1 fat 55605 1 vfat usb_storage 39646 1 dm_crypt 22528 1 joydev 17393 0 snd_hda_codec_analog 75395 1 snd_hda_intel 32719 2 pcmcia 39826 0 snd_hda_codec 109562 2 snd_hda_codec_analog,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec ip6t_LOG 16846 4 xt_hl 12465 6 ip6t_rt 12473 3 snd_pcm 80916 2 snd_hda_intel,snd_hda_codec nf_conntrack_ipv6 13581 7 nf_defrag_ipv6 13175 1 nf_conntrack_ipv6 ipt_REJECT 12512 1 ipt_LOG 12783 5 xt_limit 12541 12 xt_tcpudp 12531 21 xt_addrtype 12596 4 snd_seq_midi 13132 0 xt_state 12514 14 ip6table_filter 12711 1 ip6_tables 22528 3 ip6t_LOG,ip6t_rt,ip6table_filter nf_conntrack_netbios_ns 12585 0 nf_conntrack_broadcast 12541 1 nf_conntrack_netbios_ns nf_nat_ftp 12595 0 nf_nat 24959 1 nf_nat_ftp nf_conntrack_ipv4 19084 9 nf_nat nf_defrag_ipv4 12649 1 nf_conntrack_ipv4 nf_conntrack_ftp 13183 1 nf_nat_ftp nf_conntrack 73847 8 nf_conntrack_ipv6,xt_state,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp iptable_filter 12706 1 ip_tables 18106 1 iptable_filter snd_rawmidi 25424 1 snd_seq_midi psmouse 86982 0 x_tables 22011 13 ip6t_LOG,xt_hl,ip6t_rt,ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables arc4 12473 2 r592 17808 0 snd_seq_midi_event 14475 1 snd_seq_midi memstick 15857 1 r592 yenta_socket 27465 0 serio_raw 13027 0 pcmcia_rsrc 18367 1 yenta_socket iwl3945 73186 0 pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc iwl_legacy 71334 1 iwl3945 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event mac80211 436493 2 iwl3945,iwl_legacy snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq rfcomm 38139 0 bnep 17830 2 parport_pc 32114 0 bluetooth 158447 10 rfcomm,bnep ppdev 12849 0 cfg80211 178877 3 iwl3945,iwl_legacy,mac80211 asus_laptop 23693 0 sparse_keymap 13658 1 asus_laptop input_polldev 13648 1 asus_laptop nls_utf8 12493 6 cifs 258037 10 snd 62218 13 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd mac_hid 13077 0 snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp i915 428418 3 firewire_ohci 40172 0 sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci firewire_core 56940 1 firewire_ohci crc_itu_t 12627 1 firewire_core r8169 56396 0 drm_kms_helper 45466 1 i915 drm 197641 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19115 1 i915 doug@ubuntu:/sam$ dmesg |grep eth [ 0.116936] i2c-core: driver [aat2870] using legacy suspend method [ 0.116939] i2c-core: driver [aat2870] using legacy resume method [ 1.453811] r8169 0000:03:07.0: eth0: RTL8169sb/8110sb at 0xf840ec00, [BLANKED], XID 10000000 IRQ 16 [ 1.453815] r8169 0000:03:07.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 25.681231] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 154.037318] r8169 0000:03:07.0: eth0: link down [ 154.037329] r8169 0000:03:07.0: eth0: link down [ 154.037596] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 155.583162] r8169 0000:03:07.0: eth0: link up [ 155.583366] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 156.637048] r8169 0000:03:07.0: eth0: link down [ 156.637066] r8169 0000:03:07.0: eth0: link down [ 156.637339] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 156.773699] r8169 0000:03:07.0: eth0: link down [ 156.773983] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 158.456181] r8169 0000:03:07.0: eth0: link up [ 158.456378] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 159.364468] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 162.384496] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=38877 PROTO=2 [ 166.272457] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 166.422333] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=40695 PROTO=2 [ 168.736049] eth0: no IPv6 routers present [ 183.572472] r8169 0000:03:07.0: eth0: link down [ 183.572490] r8169 0000:03:07.0: eth0: link down [ 183.572934] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 185.204801] r8169 0000:03:07.0: eth0: link up [ 185.205005] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3620.680451] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3621.068431] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3624.912973] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9118 PROTO=2 [ 3631.088069] eth0: no IPv6 routers present [ 3703.062980] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3703.465330] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9210 PROTO=2 [ 3828.062951] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3833.617772] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9749 PROTO=2 [ 3953.062920] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3955.675129] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15983 PROTO=2 [ 4078.062922] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4078.386319] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15997 PROTO=2 [ 4203.062899] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4203.559241] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16011 PROTO=2 [ 4328.062833] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4328.930922] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16027 PROTO=2 [ 4453.062811] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4453.950224] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16039 PROTO=2 [ 4578.062742] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4580.626432] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=13738 PROTO=2 [ 4703.062704] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4706.310170] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15942 PROTO=2 [ 4828.062707] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4832.174324] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16505 PROTO=2 [ 4953.062628] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4961.469282] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16090 PROTO=2 [ 5078.062552] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5080.776462] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17239 PROTO=2 [ 5203.070394] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5205.358134] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17665 PROTO=2 [ 5328.070401] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5330.651139] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=19090 PROTO=2 [ 5453.072279] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5457.085433] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16137 PROTO=2 [ 5578.074492] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5582.359006] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16150 PROTO=2 [ 5703.074410] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5705.070122] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16163 PROTO=2 [ 5828.074387] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5835.319941] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=23298 PROTO=2 [ 5953.074429] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5961.925481] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=24261 PROTO=2 doug@ubuntu:/sam$ lspci -nnk |grep -iA2 eth 03:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10) Subsystem: ASUSTeK Computer Inc. Device [1043:11e5] Kernel driver in use: r8169 doug@ubuntu:/sam$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 doug@ubuntu:/sam$ nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Ifupdown (eth0)] ---------------------------------------------- Type: Wired Driver: r8169 State: connected Default: yes HW Address: [BLANKED] Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwl3945 State: disconnected Default: no HW Address: 00:19:D2:72:5A:0C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points ATT592: Infra, 30:60:23:76:FE:60, Freq 2437 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2 doug@ubuntu:/sam$ nslookup ubuntu.com ;; connection timed out; no servers could be reached doug@ubuntu:/sam$ dig ubuntuforums.org ; <<>> DiG 9.8.1-P1 <<>> ubuntuforums.org ;; global options: +cmd ;; connection timed out; no servers could be reached doug@ubuntu:/sam$ sudo ifconfig eth0 up doug@ubuntu:/sam$ dhcpcd eth0 The program 'dhcpcd' can be found in the following packages: * dhcpcd * dhcpcd5 Try: sudo apt-get install <selected package> doug@ubuntu:/sam$ lspci -k 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 1252 Kernel driver in use: i915 Kernel modules: intelfb, i915 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 1252 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel modules: leds-ss4200, iTCO_wdt, intel-rng 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel modules: i2c-i801 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection Kernel driver in use: iwl3945 Kernel modules: iwl3945 03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: r592 Kernel modules: r592 03:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller (rev 10) Subsystem: ASUSTeK Computer Inc. Device 11e5 Kernel driver in use: r8169 Kernel modules: r8169 doug@ubuntu:/sam$ Things I have tried: sudo start network-manager: no help gksudo gedit /etc/network/interfaces changed line to iface eth0 inet dhcp: no help gksudo gedit /etc/NetworkManager/NetworkManager.conf, I changed managed=false to managed=true. Then sudo service network-manager restart: no help: network is unreachable sudo pkill -9 NetworkManager: no help gksudo gedit /etc/resolve.conf added line nameseriver 8.8.8.8: no help I know very little about networking; to date this has simply worked. Thanks for your help! :- Doug.

    Read the article

  • SSL / HTTP / No Response to Curl

    - by Alex McHale
    I am trying to send commands to a SOAP service, and getting nothing in reply. The SOAP service is at a completely separate site from either server I am testing with. I have written a dummy script with the SOAP XML embedded. When I run it at my local site, on any of three machines -- OSX, Ubuntu, or CentOS 5.3 -- it completes successfully with a good response. I then sent the script to our public host at Slicehost, where I fail to get the response back from the SOAP service. It accepts the TCP socket and proceeds with the SSL handshake. I do not however receive any valid HTTP response. This is the case whether I use my script or curl on the command line. I have rewritten the script using SOAP4R, Net::HTTP and Curb. All of which work at my local site, none of which work at the Slicehost site. I have tried to assemble the CentOS box as closely to match my Slicehost server as possible. I rebuilt the Slice to be a stock CentOS 5.3 and stock CentOS 5.4 with the same results. When I look at a tcpdump of the bad sessions on Slicehost, I see my script or curl send the XML to the remote server, and nothing comes back. When I look at the tcpdump at my local site, I see the response just fine. I have entirely disabled iptables on the Slice. Does anyone have any ideas what could be causing these results? Please let me know what additional information I can furnish. Thank you! Below is a wire trace of a sample session. The IP that starts with 173 is my server while the IP that starts with 12 is the SOAP server's. No. Time Source Destination Protocol Info 1 0.000000 173.45.x.x 12.36.x.x TCP 36872 > https [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=137633469 TSER=0 WS=6 Frame 1 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 0, Len: 0 No. Time Source Destination Protocol Info 2 0.040000 12.36.x.x 173.45.x.x TCP https > 36872 [SYN, ACK] Seq=0 Ack=1 Win=8760 Len=0 MSS=1460 Frame 2 (62 bytes on wire, 62 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 0, Ack: 1, Len: 0 No. Time Source Destination Protocol Info 3 0.040000 173.45.x.x 12.36.x.x TCP 36872 > https [ACK] Seq=1 Ack=1 Win=5840 Len=0 Frame 3 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 1, Ack: 1, Len: 0 No. Time Source Destination Protocol Info 4 0.050000 173.45.x.x 12.36.x.x SSLv2 Client Hello Frame 4 (156 bytes on wire, 156 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 1, Ack: 1, Len: 102 Secure Socket Layer No. Time Source Destination Protocol Info 5 0.130000 12.36.x.x 173.45.x.x TCP [TCP segment of a reassembled PDU] Frame 5 (1434 bytes on wire, 1434 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 1, Ack: 103, Len: 1380 Secure Socket Layer No. Time Source Destination Protocol Info 6 0.130000 173.45.x.x 12.36.x.x TCP 36872 > https [ACK] Seq=103 Ack=1381 Win=8280 Len=0 Frame 6 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 103, Ack: 1381, Len: 0 No. Time Source Destination Protocol Info 7 0.130000 12.36.x.x 173.45.x.x TLSv1 Server Hello, Certificate, Server Hello Done Frame 7 (1280 bytes on wire, 1280 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 1381, Ack: 103, Len: 1226 [Reassembled TCP Segments (2606 bytes): #5(1380), #7(1226)] Secure Socket Layer No. Time Source Destination Protocol Info 8 0.130000 173.45.x.x 12.36.x.x TCP 36872 > https [ACK] Seq=103 Ack=2607 Win=11040 Len=0 Frame 8 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 103, Ack: 2607, Len: 0 No. Time Source Destination Protocol Info 9 0.130000 173.45.x.x 12.36.x.x TLSv1 Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message Frame 9 (236 bytes on wire, 236 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 103, Ack: 2607, Len: 182 Secure Socket Layer No. Time Source Destination Protocol Info 10 0.190000 12.36.x.x 173.45.x.x TLSv1 Change Cipher Spec, Encrypted Handshake Message Frame 10 (97 bytes on wire, 97 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 2607, Ack: 285, Len: 43 Secure Socket Layer No. Time Source Destination Protocol Info 11 0.190000 173.45.x.x 12.36.x.x TLSv1 Application Data Frame 11 (347 bytes on wire, 347 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 285, Ack: 2650, Len: 293 Secure Socket Layer No. Time Source Destination Protocol Info 12 0.190000 173.45.x.x 12.36.x.x TCP [TCP segment of a reassembled PDU] Frame 12 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 13 0.450000 12.36.x.x 173.45.x.x TCP https > 36872 [ACK] Seq=2650 Ack=578 Win=64958 Len=0 Frame 13 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 2650, Ack: 578, Len: 0 No. Time Source Destination Protocol Info 14 0.450000 173.45.x.x 12.36.x.x TCP [TCP segment of a reassembled PDU] Frame 14 (206 bytes on wire, 206 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 2038, Ack: 2650, Len: 152 No. Time Source Destination Protocol Info 15 0.510000 12.36.x.x 173.45.x.x TCP [TCP Dup ACK 13#1] https > 36872 [ACK] Seq=2650 Ack=578 Win=64958 Len=0 Frame 15 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 2650, Ack: 578, Len: 0 No. Time Source Destination Protocol Info 16 0.850000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 16 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 17 1.650000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 17 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 18 3.250000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 18 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 19 6.450000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 19 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer

    Read the article

  • More than 10k connections on linux vps

    - by Sash_007
    my question what is causing this and how to check? we use url masking script is the website..is it causing this?please help We could noticed that you are abusing our network, as you have made more than 10k connections in our node due to this our node became unstable and all of our customer faced down time because of your VPS. Please find the log details below for your reference. ============================== 593 src=199.231.227.56 dst=58.2.236.196 465 src=199.231.227.56 dst=192.223.243.6 396 src=199.231.227.56 dst=58.2.238.191 217 src=199.231.227.56 dst=58.2.236.197 161 src=199.231.227.56 dst=20.139.83.50 145 src=199.231.227.56 dst=192.223.163.6 136 src=199.231.227.56 dst=125.21.230.68 134 src=199.231.227.56 dst=125.21.230.132 131 src=199.231.227.56 dst=20.139.67.50 117 src=199.231.227.56 dst=110.234.29.210 112 src=199.231.227.56 dst=65.52.0.51 104 src=199.231.227.56 dst=202.46.23.55 100 src=199.231.227.56 dst=202.3.120.4 94 src=199.231.227.56 dst=117.198.39.22 69 src=203.197.253.62 dst=199.231.227.56 62 src=14.194.248.225 dst=199.231.227.56 53 src=199.231.227.56 dst=192.223.136.5 52 src=49.248.11.195 dst=199.231.227.56 51 src=199.231.227.56 dst=117.198.38.15 50 src=199.231.227.56 dst=192.71.175.2 47 src=199.231.227.56 dst=61.16.189.76 45 src=199.231.227.56 dst=122.177.222.17 43 src=199.231.227.56 dst=115.242.89.40 42 src=199.231.227.56 dst=103.22.237.215 41 src=125.16.9.2 dst=199.231.227.56 39 src=199.231.227.56 dst=117.198.35.90 38 src=199.231.227.56 dst=203.91.201.54 38 src=199.231.227.56 dst=14.139.241.89 38 src=199.231.227.56 dst=111.93.85.82 37 src=199.231.227.56 dst=65.52.0.56 Note: 1st column indicates the total number of connections to a particular IP. You have totally made more than 10k connections.

    Read the article

  • New Time Zone Patch DST V18 is available

    - by Mike Dietrich
    Sorry for not updating the blog more often at the moment - but more updates will come soon as I play around with Oracle Restart and single instance databases in ASM with Oracle 11.2. Just on the side there's a new time zone patch to DST V18 available since May 2012. You can download it via PATCH download from MOS with the patch number: 13417321 What do you think? Will Lufthansa operate a faster jet the other night? Will the jet stream be more powerful? Or a better type of fuel? Or is it just the travel portal which hasn't applied the correct time zone patches to catch DST change that night in the US whereas it happens two weeks later in Europe? Guess ... And please see the readme about how to apply the patch and our slides about why time zone patching may be important even in your environment RDBMS bug: Bug 13417321: DST 18 : HALF YEARLY DST PATCHES, MAY 2012 OJVM Bug 14112098 - dst changes for dstv18 (tzdata2012c) - need ojvm fix

    Read the article

  • Offset time for DST in one specific timezone using JavaScript

    - by Shannon
    I need to offset the time by an hour if it's currently DST in the Pacific Time Zone. How can I determine the current daylight savings status of the Pacific Time Zone, regardless of the user's local timezone? Here's what I have so far. "dst" in line 4 is just a placeholder for a function that would tell me if daylight savings time is active in that zone. function checkTime() { var d = new Date(); var hour = d.getUTCHours(); var offset = dst ? 7 : 8; // is pacific time currently in daylight savings? // is it currently 6 AM, 2 PM, or 10 PM? if (hour === ((6 + offset) % 24) || hour === ((14 + offset) % 24) || hour === ((22 + offset) % 24)) { // do stuff } } checkTime();

    Read the article

  • Autodetect timezone in Rails given UTC offset and DST

    - by Jose
    I basically want to autodetect a user's timezone using Rails. I can use this JS code at the user's browser (http://www.onlineaspect.com/2007/06/08/auto-detect-a-time-zone-with-javascript/) to send a form with the UTC offset and the fact that the time zone observes DST during summer or not, in the user's time zone. Once I have that info in the server, I want to select the matching time zone. In Rails, I can get a list of time zones with ActiveSupport::TimeZone.all. Also, I can filter zones by utf offset thanks to the utc_offset method. However, I don't know how to filter the timezones that do/don't observe DST. E.g. suppose a user lives in Amsterdam. Filtering by UTC offset will return Berlin, Belgrado, Madrid, etc timezones, as well as West Central Africa. All of them, but West Central Africa, would be appropriate timezones for a user in Amsterdam (as they provide the same time/date), but I need to filter West Central Africa, which does not perform DST in summer. How can I do this in Rails? Also, are any of my assumptions wrong?

    Read the article

  • What approach to take for SIMD optimizations

    - by goldenmean
    Hi, I am trying to optimize below code for SIMD operations (8way/4way/2way SIMD whiechever possible and if it gives gains in performance) I am tryin to analyze it first on paper to understand the algorithm used. How can i optimize it for SIMD:- void idct(uint8_t *dst, int stride, int16_t *input, int type) { int16_t *ip = input; uint8_t *cm = ff_cropTbl + MAX_NEG_CROP; int A, B, C, D, Ad, Bd, Cd, Dd, E, F, G, H; int Ed, Gd, Add, Bdd, Fd, Hd; int i; /* Inverse DCT on the rows now */ for (i = 0; i < 8; i++) { /* Check for non-zero values */ if ( ip[0] | ip[1] | ip[2] | ip[3] | ip[4] | ip[5] | ip[6] | ip[7] ) { A = M(xC1S7, ip[1]) + M(xC7S1, ip[7]); B = M(xC7S1, ip[1]) - M(xC1S7, ip[7]); C = M(xC3S5, ip[3]) + M(xC5S3, ip[5]); D = M(xC3S5, ip[5]) - M(xC5S3, ip[3]); Ad = M(xC4S4, (A - C)); Bd = M(xC4S4, (B - D)); Cd = A + C; Dd = B + D; E = M(xC4S4, (ip[0] + ip[4])); F = M(xC4S4, (ip[0] - ip[4])); G = M(xC2S6, ip[2]) + M(xC6S2, ip[6]); H = M(xC6S2, ip[2]) - M(xC2S6, ip[6]); Ed = E - G; Gd = E + G; Add = F + Ad; Bdd = Bd - H; Fd = F - Ad; Hd = Bd + H; /* Final sequence of operations over-write original inputs. */ ip[0] = (int16_t)(Gd + Cd) ; ip[7] = (int16_t)(Gd - Cd ); ip[1] = (int16_t)(Add + Hd); ip[2] = (int16_t)(Add - Hd); ip[3] = (int16_t)(Ed + Dd) ; ip[4] = (int16_t)(Ed - Dd ); ip[5] = (int16_t)(Fd + Bdd); ip[6] = (int16_t)(Fd - Bdd); } ip += 8; /* next row */ } ip = input; for ( i = 0; i < 8; i++) { /* Check for non-zero values (bitwise or faster than ||) */ if ( ip[1 * 8] | ip[2 * 8] | ip[3 * 8] | ip[4 * 8] | ip[5 * 8] | ip[6 * 8] | ip[7 * 8] ) { A = M(xC1S7, ip[1*8]) + M(xC7S1, ip[7*8]); B = M(xC7S1, ip[1*8]) - M(xC1S7, ip[7*8]); C = M(xC3S5, ip[3*8]) + M(xC5S3, ip[5*8]); D = M(xC3S5, ip[5*8]) - M(xC5S3, ip[3*8]); Ad = M(xC4S4, (A - C)); Bd = M(xC4S4, (B - D)); Cd = A + C; Dd = B + D; E = M(xC4S4, (ip[0*8] + ip[4*8])) + 8; F = M(xC4S4, (ip[0*8] - ip[4*8])) + 8; if(type==1){ //HACK E += 16*128; F += 16*128; } G = M(xC2S6, ip[2*8]) + M(xC6S2, ip[6*8]); H = M(xC6S2, ip[2*8]) - M(xC2S6, ip[6*8]); Ed = E - G; Gd = E + G; Add = F + Ad; Bdd = Bd - H; Fd = F - Ad; Hd = Bd + H; /* Final sequence of operations over-write original inputs. */ if(type==0){ ip[0*8] = (int16_t)((Gd + Cd ) >> 4); ip[7*8] = (int16_t)((Gd - Cd ) >> 4); ip[1*8] = (int16_t)((Add + Hd ) >> 4); ip[2*8] = (int16_t)((Add - Hd ) >> 4); ip[3*8] = (int16_t)((Ed + Dd ) >> 4); ip[4*8] = (int16_t)((Ed - Dd ) >> 4); ip[5*8] = (int16_t)((Fd + Bdd ) >> 4); ip[6*8] = (int16_t)((Fd - Bdd ) >> 4); }else if(type==1){ dst[0*stride] = cm[(Gd + Cd ) >> 4]; dst[7*stride] = cm[(Gd - Cd ) >> 4]; dst[1*stride] = cm[(Add + Hd ) >> 4]; dst[2*stride] = cm[(Add - Hd ) >> 4]; dst[3*stride] = cm[(Ed + Dd ) >> 4]; dst[4*stride] = cm[(Ed - Dd ) >> 4]; dst[5*stride] = cm[(Fd + Bdd ) >> 4]; dst[6*stride] = cm[(Fd - Bdd ) >> 4]; }else{ dst[0*stride] = cm[dst[0*stride] + ((Gd + Cd ) >> 4)]; dst[7*stride] = cm[dst[7*stride] + ((Gd - Cd ) >> 4)]; dst[1*stride] = cm[dst[1*stride] + ((Add + Hd ) >> 4)]; dst[2*stride] = cm[dst[2*stride] + ((Add - Hd ) >> 4)]; dst[3*stride] = cm[dst[3*stride] + ((Ed + Dd ) >> 4)]; dst[4*stride] = cm[dst[4*stride] + ((Ed - Dd ) >> 4)]; dst[5*stride] = cm[dst[5*stride] + ((Fd + Bdd ) >> 4)]; dst[6*stride] = cm[dst[6*stride] + ((Fd - Bdd ) >> 4)]; } } else { if(type==0){ ip[0*8] = ip[1*8] = ip[2*8] = ip[3*8] = ip[4*8] = ip[5*8] = ip[6*8] = ip[7*8] = ((xC4S4 * ip[0*8] + (IdctAdjustBeforeShift<<16))>>20); }else if(type==1){ dst[0*stride]= dst[1*stride]= dst[2*stride]= dst[3*stride]= dst[4*stride]= dst[5*stride]= dst[6*stride]= dst[7*stride]= cm[128 + ((xC4S4 * ip[0*8] + (IdctAdjustBeforeShift<<16))>>20)]; }else{ if(ip[0*8]){ int v= ((xC4S4 * ip[0*8] + (IdctAdjustBeforeShift<<16))>>20); dst[0*stride] = cm[dst[0*stride] + v]; dst[1*stride] = cm[dst[1*stride] + v]; dst[2*stride] = cm[dst[2*stride] + v]; dst[3*stride] = cm[dst[3*stride] + v]; dst[4*stride] = cm[dst[4*stride] + v]; dst[5*stride] = cm[dst[5*stride] + v]; dst[6*stride] = cm[dst[6*stride] + v]; dst[7*stride] = cm[dst[7*stride] + v]; } } } ip++; /* next column */ dst++; } }

    Read the article

  • System time wrong after running ntpdate because DST ignored

    - by Ian Dunn
    When I run ntpdate, my system clock displays the time as an hour behind what it should be. I know that ntpdate does everything in UTC, so I'm guessing there's a timezone setting wrong and it's ignoring Daylight Savings Time, but I can't figure it out. Here's what I've done so far: ln -sf /usr/share/zoneinfo/EST /etc/localtime to set the timezone Set UTC=true in /etc/sysconfig/clock so that DST will be automatically applied date -s hh:mm::ss to set system clock correctly hwclock -systohc --utc to set the hardware clock correctly At this point date and hwclock both display the correct time. But if I then run ntpdate 0.us.pool.ntp.org, the date output is an hour behind what it should be. I've looked at a dozen tutorials and can't figure out what I'm doing wrong. Does anyone have any ideas?

    Read the article

  • Daylight saving time and Timezone best practices

    - by Oded
    I am hoping to make this question and the answers to it the definitive guide to dealing with daylight saving time, in particular for dealing with the actual change overs. If you have anything to add, please do Many systems are dependent on keeping accurate time, the problem is with changes to time due to daylight savings - moving the clock forward or backwards. For instance, one has business rules in an order taking system that depend on the time of the order - if the clock changes, the rules might not be as clear. How should the time of the order be persisted? There is of course an endless number of scenarios - this one is simply an illustrative one. How have you dealt with the daylight saving issue? What assumptions are part of your solution? (looking for context here) As important, if not more so: What did you try that did not work? Why did it not work? I would be interested in programming, OS, data persistence and other pertinent aspects of the issue. General answers are great, but I would also like to see details especially if they are only available on one platform. Summary of answers and other data: (please add yours) Do: Always persist time according to a unified standard that is not affected by daylight savings. GMT and UTC have been mentioned by different people. Include the local time offset (including DST offset) in stored timestamps. Remember that DST offsets are not always an integer number of hours (e.g. Indian Standard Time is UTC+05:30). If using Java, use JodaTime. - http://joda-time.sourceforge.net/ Create a table TZOffsets with three columns: RegionClassId, StartDateTime, and OffsetMinutes (int, in minutes). See answer Check if your DBMS needs to be shutdown during transition. Business rules should always work on civil time. Internally, keep timestamps in something like civil-time-seconds-from-epoch. See answer Only convert to local times at the last possible moment. Don't: Do not use javascript date and time calculations in web apps unless you ABSOLUTELY have to. Testing: When testing make sure you test countries in the Western and Eastern hemispheres, with both DST in progress and not and a country that does not use DST (6 in total). Reference: Olson database, aka Tz_database - ftp://elsie.nci.nih.gov/pub Sources for Time Zone and DST - http://www.twinsun.com/tz/tz-link.htm ISO format (ISO 8601) - http://en.wikipedia.org/wiki/ISO_8601 Mapping between Olson database and Windows TimeZone Ids, from the Unicode Consortium - http://unicode.org/repos/cldr-tmp/trunk/diff/supplemental/windows_tzid.html TimeZone page on WikiPedia - http://en.wikipedia.org/wiki/Tz_database StackOverflow questions tagged dst - http://stackoverflow.com/questions/tagged/dst StackOverflow questions tagged timezone - http://stackoverflow.com/questions/tagged/timezone Other: Lobby your representative to end the abomination that is DST. We can always hope...

    Read the article

  • I have UFW block messages from local network machines, how can I analyse if they are malicious?

    - by Trygve
    I'm getting a lot of messages in my UFW log, and I'm trying to figure out if these are malicious or just normal. A UDP broadcast is coming from a windows laptop x.x.x.191, and some from our synology disks x.x.x.{6,8,10,11}. I have not figured out which macine 114 is yet. I would appreciate some advice in how to read the log, and get the most I can out of these calls. Oct 18 17:03:34 <myusername> kernel: [ 4034.755221] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:00:11:32:06:e8:19:08:00 SRC=x.x.x.6 DST=x.x.x.169 LEN=364 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=47978 LEN=344 Oct 18 17:03:34 <myusername> kernel: [ 4034.755292] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:00:11:32:1b:e8:8f:08:00 SRC=x.x.x.10 DST=x.x.x.169 LEN=366 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=47978 LEN=346 Oct 18 17:03:34 <myusername> kernel: [ 4034.756444] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:c0:c1:c0:52:18:ea:08:00 SRC=x.x.x.8 DST=x.x.x.169 LEN=294 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=47978 LEN=274 Oct 18 17:03:34 <myusername> kernel: [ 4034.756613] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:c0:c1:c0:52:18:ea:08:00 SRC=x.x.x.8 DST=x.x.x.169 LEN=306 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=47978 LEN=286 Oct 18 17:03:34 <myusername> kernel: [ 4034.760416] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:00:11:32:1e:6a:33:08:00 SRC=x.x.x.11 DST=x.x.x.169 LEN=366 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=47978 LEN=346 Oct 18 17:03:36 <myusername> kernel: [ 4036.215134] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:00:22:19:de:80:a4:08:00 SRC=x.x.x.191 DST=x.x.x.169 LEN=424 TOS=0x00 PREC=0x00 TTL=128 ID=11155 PROTO=UDP SPT=1900 DPT=47978 LEN=404 Oct 18 17:04:23 <myusername> kernel: [ 4083.853710] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:22:19:de:80:a4:08:00 SRC=x.x.x.191 DST=239.255.255.250 LEN=652 TOS=0x00 PREC=0x00 TTL=1 ID=11247 PROTO=UDP SPT=58930 DPT=3702 LEN=632 Oct 18 17:04:24 <myusername> kernel: [ 4084.063153] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:22:19:de:80:a4:08:00 SRC=x.x.x.191 DST=239.255.255.250 LEN=652 TOS=0x00 PREC=0x00 TTL=1 ID=11299 PROTO=UDP SPT=58930 DPT=3702 LEN=632 Oct 18 17:07:02 <myusername> kernel: [ 4242.153947] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:22:19:de:80:a4:08:00 SRC=x.x.x.191 DST=239.255.255.250 LEN=680 TOS=0x00 PREC=0x00 TTL=1 ID=18702 PROTO=UDP SPT=58930 DPT=3702 LEN=660 Oct 18 17:07:02 <myusername> kernel: [ 4242.275788] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:22:19:de:80:a4:08:00 SRC=x.x.x.191 DST=239.255.255.250 LEN=680 TOS=0x00 PREC=0x00 TTL=1 ID=18703 PROTO=UDP SPT=58930 DPT=3702 LEN=660 Oct 18 17:12:29 <myusername> kernel: [ 4569.073815] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:22:19:de:80:a4:08:00 SRC=x.x.x.191 DST=239.255.255.250 LEN=680 TOS=0x00 PREC=0x00 TTL=1 ID=30102 PROTO=UDP SPT=58930 DPT=3702 LEN=660 Oct 18 17:12:29 <myusername> kernel: [ 4569.242740] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:22:19:de:80:a4:08:00 SRC=x.x.x.191 DST=239.255.255.250 LEN=680 TOS=0x00 PREC=0x00 TTL=1 ID=30103 PROTO=UDP SPT=58930 DPT=3702 LEN=660 Oct 18 17:17:02 <myusername> kernel: [ 4841.440729] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:22:19:de:80:a4:08:00 SRC=x.x.x.191 DST=239.255.255.250 LEN=680 TOS=0x00 PREC=0x00 TTL=1 ID=9195 PROTO=UDP SPT=58930 DPT=3702 LEN=660 Oct 18 17:17:02 <myusername> kernel: [ 4841.553211] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:22:19:de:80:a4:08:00 SRC=x.x.x.191 DST=239.255.255.250 LEN=680 TOS=0x00 PREC=0x00 TTL=1 ID=9196 PROTO=UDP SPT=58930 DPT=3702 LEN=660 Oct 18 17:19:10 <myusername> kernel: [ 4969.294709] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:25:36:26:02:86:08:00 SRC=x.x.x.114 DST=239.255.255.250 LEN=923 TOS=0x00 PREC=0x00 TTL=1 ID=27103 PROTO=UDP SPT=3702 DPT=3702 LEN=903 Oct 18 17:19:10 <myusername> kernel: [ 4969.314553] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:25:36:26:02:86:08:00 SRC=x.x.x.114 DST=239.255.255.250 LEN=923 TOS=0x00 PREC=0x00 TTL=1 ID=27104 PROTO=UDP SPT=3702 DPT=3702 LEN=903 Oct 18 17:33:34 <myusername> kernel: [ 5832.431610] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:00:11:32:1b:e8:8f:08:00 SRC=x.x.x.10 DST=x.x.x.169 LEN=366 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=55281 LEN=346 Oct 18 17:33:34 <myusername> kernel: [ 5832.431659] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:00:11:32:06:e8:19:08:00 SRC=x.x.x.6 DST=x.x.x.169 LEN=364 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=55281 LEN=344 Oct 18 17:33:34 <myusername> kernel: [ 5832.431865] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:00:11:32:1e:6a:33:08:00 SRC=x.x.x.11 DST=x.x.x.169 LEN=366 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=55281 LEN=346 Oct 18 17:33:34 <myusername> kernel: [ 5832.433024] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:c0:c1:c0:52:18:ea:08:00 SRC=x.x.x.8 DST=x.x.x.169 LEN=294 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=55281 LEN=274 Oct 18 17:33:34 <myusername> kernel: [ 5832.433224] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:c0:c1:c0:52:18:ea:08:00 SRC=x.x.x.8 DST=x.x.x.169 LEN=306 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=55281 LEN=286 Oct 18 17:33:37 <myusername> kernel: [ 5834.914484] [UFW BLOCK] IN=eth0 OUT= MAC=f0:de:f1:71:c3:2e:00:22:19:de:80:a4:08:00 SRC=x.x.x.191 DST=x.x.x.169 LEN=424 TOS=0x00 PREC=0x00 TTL=128 ID=10075 PROTO=UDP SPT=1900 DPT=55281 LEN=404

    Read the article

  • iptables syn flood countermeasure

    - by Penegal
    I'm trying to adjust my iptables firewall to increase the security of my server, and I found something a bit problematic here : I have to set INPUT policy to ACCEPT and, in addition, to have a rule saying iptables -I INPUT -i eth0 -j ACCEPT. Here comes my script (launched manually for tests) : #!/bin/sh IPT=/sbin/iptables echo "Clearing firewall rules" $IPT -F $IPT -Z $IPT -t nat -F $IPT -t nat -Z $IPT -t mangle -F $IPT -t mangle -Z $IPT -X echo "Defining logging policy for dropped packets" $IPT -N LOGDROP $IPT -A LOGDROP -j LOG -m limit --limit 5/min --log-level debug --log-prefix "iptables rejected: " $IPT -A LOGDROP -j DROP echo "Setting firewall policy" $IPT -P INPUT DROP # Deny all incoming connections $IPT -P OUTPUT ACCEPT # Allow all outgoing connections $IPT -P FORWARD DROP # Deny all forwaring echo "Allowing connections from/to lo and incoming connections from eth0" $IPT -I INPUT -i lo -j ACCEPT $IPT -I OUTPUT -o lo -j ACCEPT #$IPT -I INPUT -i eth0 -j ACCEPT echo "Setting SYN flood countermeasures" $IPT -A INPUT -p tcp -i eth0 --syn -m limit --limit 100/second --limit-burst 200 -j LOGDROP echo "Allowing outgoing traffic corresponding to already initiated connections" $IPT -A OUTPUT -p ALL -m state --state ESTABLISHED,RELATED -j ACCEPT echo "Allowing incoming SSH" $IPT -A INPUT -p tcp --dport 22 -m state --state NEW -m recent --set --name SSH -j ACCEPT echo "Setting SSH bruteforce attacks countermeasures (deny more than 10 connections every 10 minutes)" $IPT -A INPUT -p tcp --dport 22 -m recent --update --seconds 600 --hitcount 10 --rttl --name SSH -j LOGDROP echo "Allowing incoming traffic for HTTP, SMTP, NTP, PgSQL and SolR" $IPT -A INPUT -p tcp --dport 25 -i eth0 -j ACCEPT $IPT -A INPUT -p tcp --dport 80 -i eth0 -j ACCEPT $IPT -A INPUT -p udp --dport 123 -i eth0 -j ACCEPT $IPT -A INPUT -p tcp --dport 5433 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p udp --dport 5433 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p tcp --dport 8983 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p udp --dport 8983 -i eth0.2654 -s 172.16.0.2 -j ACCEPT echo "Allowing outgoing traffic for ICMP, SSH, whois, SMTP, DNS, HTTP, PgSQL and SolR" $IPT -A OUTPUT -p tcp --dport 22 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 25 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 43 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 53 -o eth0 -j ACCEPT $IPT -A OUTPUT -p udp --dport 53 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 80 -o eth0 -j ACCEPT $IPT -A OUTPUT -p udp --dport 80 -o eth0 -j ACCEPT #$IPT -A OUTPUT -p tcp --dport 5433 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p udp --dport 5433 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p tcp --dport 8983 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p udp --dport 8983 -o eth0 -d 176.31.236.101 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 5433 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p udp --sport 5433 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 8983 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p udp --sport 8983 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p icmp -j ACCEPT echo "Allowing outgoing FTP backup" $IPT -A OUTPUT -p tcp --dport 20:21 -o eth0 -d 91.121.190.78 -j ACCEPT echo "Dropping and logging everything else" $IPT -A INPUT -s 0/0 -j LOGDROP $IPT -A OUTPUT -j LOGDROP $IPT -A FORWARD -j LOGDROP echo "Firewall loaded." echo "Maintaining new rules for 3 minutes for tests" sleep 180 $IPT -nvL echo "Clearing firewall rules" $IPT -F $IPT -Z $IPT -t nat -F $IPT -t nat -Z $IPT -t mangle -F $IPT -t mangle -Z $IPT -X $IPT -P INPUT ACCEPT $IPT -P OUTPUT ACCEPT $IPT -P FORWARD ACCEPT When I launch this script (I only have a SSH access), the shell displays every message up to Maintaining new rules for 3 minutes for tests, the server is unresponsive during the 3 minutes delay and then resume normal operations. The only solution I found until now was to set $IPT -P INPUT ACCEPT and $IPT -I INPUT -i eth0 -j ACCEPT, but this configuration does not protect me of any attack, which is a great shame for a firewall. I suspect that the error comes from my script and not from iptables, but I don't understand what's wrong with my script. Could some do-gooder explain me my error, please? EDIT: here comes the result of iptables -nvL with the "accept all input" ($IPT -P INPUT ACCEPT and $IPT -I INPUT -i eth0 -j ACCEPT) solution : Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 1 52 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 100/sec burst 200 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 state NEW recent: SET name: SSH side: source 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 recent: UPDATE seconds: 600 hit_count: 10 TTL-Match name: SSH side: source 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 tcp dpt:5433 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 udp dpt:5433 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 tcp dpt:8983 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 udp dpt:8983 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 2 728 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:43 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp spt:5433 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp spt:5433 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp spt:8983 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp spt:8983 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 91.121.190.78 tcp dpts:20:21 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain LOGDROP (5 references) pkts bytes target prot opt in out source destination 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix `iptables rejected: ' 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 EDIT #2 : I modified my script (policy ACCEPT, defining authorized incoming packets then logging and dropping everything else) to write iptables -nvL results to a file and to allow only 10 ICMP requests per second, logging and dropping everything else. The result proved unexpected : while the server was unavailable to SSH connections, even already established, I ping-flooded it from another server, and the ping rate was restricted to 10 requests per second. During this test, I also tried to open new SSH connections, which remained unanswered until the script flushed rules. Here comes the iptables stats written after these tests : Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 600 35520 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 6 360 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 100/sec burst 200 0 0 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "w00tw00t.at.ISC.SANS." ALGO name bm TO 65535 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "Host: anoticiapb.com.br" ALGO name bm TO 65535 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "Host: www.anoticiapb.com.br" ALGO name bm TO 65535 105 8820 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 10/sec burst 5 830 69720 LOGDROP icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 state NEW recent: SET name: SSH side: source 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 recent: UPDATE seconds: 600 hit_count: 10 TTL-Match name: SSH side: source 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 tcp spt:5433 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 udp spt:5433 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 tcp spt:8983 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 udp spt:8983 16 1684 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 600 35520 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 0 0 LOGDROP tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 owner UID match 33 0 0 LOGDROP udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 owner UID match 33 116 11136 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp dpt:5433 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp dpt:5433 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp dpt:8983 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp dpt:8983 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:43 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 91.121.190.18 tcp dpts:20:21 7 1249 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain LOGDROP (11 references) pkts bytes target prot opt in out source destination 35 3156 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 1/sec burst 5 LOG flags 0 level 7 prefix `iptables rejected: ' 859 73013 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Here comes the log content added during this test : Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=52 TOS=0x00 PREC=0x00 TTL=51 ID=55666 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=52 TOS=0x00 PREC=0x00 TTL=51 ID=55667 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55668 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55669 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:52 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55670 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:54 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55671 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:58 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55672 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=6 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=7 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=8 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=9 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=59 Mar 28 09:53:00 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=152 Mar 28 09:53:01 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=246 Mar 28 09:53:02 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=339 Mar 28 09:53:03 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=432 Mar 28 09:53:04 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=524 Mar 28 09:53:05 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=617 Mar 28 09:53:06 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=711 Mar 28 09:53:07 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=804 Mar 28 09:53:08 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=897 Mar 28 09:53:16 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61402 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:19 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61403 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:21 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55674 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:53:25 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61404 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=116 TOS=0x00 PREC=0x00 TTL=51 ID=55675 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=116 TOS=0x00 PREC=0x00 TTL=51 ID=55676 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55677 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:38 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55678 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:39 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55679 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:39 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5055 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:41 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55680 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:42 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5056 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:45 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55681 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:48 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5057 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 If I correctly interpreted these results, they say that ICMP rules were correctly interpreted by iptables, but SSH rules were not. This does not make any sense... Does somebody understand where my error comes from? EDIT #3 : After some more tests, I found out that commenting the SYN flood countermeasure removes the problem. I continue researches in this way but, meanwhile, if somebody sees my anti SYN flood rule error...

    Read the article

  • Python datetime not including DST when using pytz timezone

    - by Jesper
    If I convert a UTC datetime to swedish format, summertime is included (CEST). However, while creating a datetime with sweden as the timezone, it gets CET instead of CEST. Why is this? >>> # Modified for readability >>> import pytz >>> import datetime >>> sweden = pytz.timezone('Europe/Stockholm') >>> >>> datetime.datetime(2010, 4, 20, 16, 20, tzinfo=pytz.utc).astimezone(sweden) datetime(2010, 4, 20, 18, 20, tzinfo=<... 'Europe/Stockholm' CEST+2:00:00 DST>) >>> >>> datetime.datetime(2010, 4, 20, 18, 20, tzinfo=sweden) datetime(2010, 4, 20, 18, 20, tzinfo=<... 'Europe/Stockholm' CET+1:00:00 STD>) >>>

    Read the article

  • Automatic setting of Local Time zone w/DST

    - by Frode Roed
    I can derive latitude and longitude and UTC time from GPS NMEA sentences. Now, how can I automaticly adjust the Windows local time zone on my PC (2003 Server OS), based on this? Also, Is there an easy way of distributing this to clients based on code or apps software? Preferred programming environment is .NET, C# & Visual Studio. I use a GPS Time server (GPS clock with antenna) today, but this could not support other than UTC. I want to set computers in my TCP/UDP network to correct time zone w/DST based on coordinates derived from GPS, so manually setting of all is not required.

    Read the article

  • Robocopy for Windows 2003 doesn't support /DST option

    - by Jon
    Does anyone know if it is possible to download the latest robocopy for Windows 2003. The latest version provides the /DST option which ignores time stamps changed due to BST (British Summer Time). Every time we do a build and sync our servers when we go +1/-1 hour it takes hours instead of minutes because it sees everything as changed. I noticed it is included automatically with Vista/Win7 but the Resource toolkit that I downloaded doesn't include a new version of robocopy for Win Server 2003. If there is a place to download it from & will it also work on Windows Server 2003? Thanks.

    Read the article

  • Daylight saving time of current tz

    - by spam2
    Hi, in my c++ software I've used Boost in some parts and also for the local time. OK, now my problem is to make a check if in my machine is active or not the DST. With the follow part of code I can know only the difference from the UTC time. In my case the difference is 2 hours because is active the DST ptime tLoc = second_clock::local_time(); ptime tUTC = second_clock::universal_time(); time_duration tDiff = tUTC - tLoc; local_time_zone = tDiff.hours(); I think that the boolean funcion has_dst() can help, right? My system is Debian GNU/Linux. Thanks

    Read the article

  • Weird UPD packets on incoming FTP MLSD command

    - by FractalizeR
    Hello. I am developing a firewall script for my server. So far it is working fine, except for FTP. Server is dedicated, CentOS based with static IP. There is no NAT between me and server. IPTables is a firewall. Here is a script I use to configure iptables: http://pastebin.com/f54a70fec I allow all RELATED and ESTABLISHED connections in it and load all conn_track modules. I supposed it to be sufficient in order FTP to work with iptables. The problem is that FTP is not working either in passive or active mode. FileZilla and TotalCommander just hangs on MLSD FTP command. In the server log at the exact moment of FTP connection some weird packets are dropped by firewall: Dec 20 15:37:09 server ntpd[12329]: synchronized to 81.200.8.213, stratum 5 Dec 20 15:37:14 server proftpd[30526]: gsmforum.ru (::ffff:95.24.7.25[::ffff:95.24.7.25]) - FTP session opened. Dec 20 12:37:14 server proftpd[30526]: gsmforum.ru (::ffff:95.24.7.25[::ffff:95.24.7.25]) - Preparing to chroot to directory '/home/gsmforum' Dec 20 15:37:23 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:1a:64:6b:1d:67:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=306 TOS=0x00 PREC=0x00 TTL=128 ID=32566 DF PROTO=UDP SPT=68 DPT=67 LEN=286 Dec 20 15:37:25 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:1f:29:63:03:de:08:00 SRC=89.111.189.17 DST=255.255.255.255 LEN=68 TOS=0x00 PREC=0x00 TTL=128 ID=13480 PROTO=UDP SPT=1052 DPT=1947 LEN=48 Dec 20 15:37:26 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=61798 PROTO=TCP SPT=4178 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:26 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:1a:64:9c:50:e7:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=306 TOS=0x00 PREC=0x00 TTL=128 ID=50015 DF PROTO=UDP SPT=68 DPT=67 LEN=286 Dec 20 15:37:26 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=62305 PROTO=TCP SPT=4178 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:26 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:19:bb:eb:c6:e1:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=30 ID=5245 PROTO=UDP SPT=68 DPT=67 LEN=308 Dec 20 15:37:27 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=63285 PROTO=TCP SPT=4178 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:29 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=391 PROTO=TCP SPT=4183 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:29 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=707 PROTO=TCP SPT=4178 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:30 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=975 PROTO=TCP SPT=4183 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:30 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:15:17:10:c5:9b:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=30 ID=28799 PROTO=UDP SPT=68 DPT=67 LEN=308 Dec 20 15:37:30 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=2020 PROTO=TCP SPT=4187 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:31 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=2383 PROTO=TCP SPT=4183 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:31 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=2533 PROTO=TCP SPT=4187 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:32 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=3271 PROTO=TCP SPT=4190 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:32 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=77.35.184.49 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=115 ID=14501 DF PROTO=TCP SPT=1355 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:32 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=3700 PROTO=TCP SPT=4187 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:32 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=3769 PROTO=TCP SPT=4196 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:32 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=4034 PROTO=TCP SPT=4190 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:33 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=4522 PROTO=TCP SPT=4196 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:33 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=4657 PROTO=TCP SPT=4183 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Can you please suggest what is the problem? Everything is working fine except for this damn FTP.

    Read the article

  • Comparing dicts and update a list of result

    - by lmnt
    Hello, I have a list of dicts and I want to compare each dict in that list with a dict in a resulting list, add it to the result list if it's not there, and if it's there, update a counter associated with that dict. At first I wanted to use the solution described at http://stackoverflow.com/questions/1692388/python-list-of-dict-if-exists-increment-a-dict-value-if-not-append-a-new-dict but I got an error where one dict can not be used as a key to another dict. So the data structure I opted for is a list where each entry is a dict and an int: r = [[{'src': '', 'dst': '', 'cmd': ''}, 0]] The original dataset (that should be compared to the resulting dataset) is a list of dicts: d1 = {'src': '192.168.0.1', 'dst': '192.168.0.2', 'cmd': 'cmd1'} d2 = {'src': '192.168.0.1', 'dst': '192.168.0.2', 'cmd': 'cmd2'} d3 = {'src': '192.168.0.2', 'dst': '192.168.0.1', 'cmd': 'cmd1'} d4 = {'src': '192.168.0.1', 'dst': '192.168.0.2', 'cmd': 'cmd1'} o = [d1, d2, d3, d4] The result should be: r = [[{'src': '192.168.0.1', 'dst': '192.168.0.2', 'cmd': 'cmd1'}, 2], [{'src': '192.168.0.1', 'dst': '192.168.0.2', 'cmd': 'cmd2'}, 1], [{'src': '192.168.0.2', 'dst': '192.168.0.1', 'cmd': 'cmd1'}, 1]] What is the best way to accomplish this? I have a few code examples but none is really good and most is not working correctly. Thanks for any input on this! UPDATE The final code after Tamås comments is: from collections import namedtuple, defaultdict DataClass = namedtuple("DataClass", "src dst cmd") d1 = DataClass(src='192.168.0.1', dst='192.168.0.2', cmd='cmd1') d2 = DataClass(src='192.168.0.1', dst='192.168.0.2', cmd='cmd2') d3 = DataClass(src='192.168.0.2', dst='192.168.0.1', cmd='cmd1') d4 = DataClass(src='192.168.0.1', dst='192.168.0.2', cmd='cmd1') ds = d1, d2, d3, d4 r = defaultdict(int) for d in ds: r[d] += 1 print "list to compare" for d in ds: print d print "result after merge" for k, v in r.iteritems(): print("%s: %s" % (k, v))

    Read the article

  • Convert UTC DateTime to another Time Zone

    - by Mark Richman
    I have a UTC DateTime value coming from a database record. I also have a user-specified time zone (an instance of TimeZoneInfo). How do I convert that UTC DateTime to the user's local time zone? Also, how do I determine if the user-specified time zone is currently observing DST? I'm using .NET 3.5. Thanks, Mark

    Read the article

  • Does salesforce.com have a timezone field that is DST aware?

    - by vfilby
    I am mailing out reminders to potential customers and the time is getting converted to our servers timezone EST (I think it is currently using EDT though as appropriate). I need to store the timezone for the potential customer and translate the time into their current timezone. I can store the offset but I am worried about daylight savings time. I can always store a non-DST offset but that causes issues when the signup appointment is scheduled before DST but occurs after DST. Ideally I would like to store a timezone and have salesforce translate the datetime to that timezone accounting for DST if necessary. How can I do this?

    Read the article

  • perl DateTime now() problem

    - by Sergey Sinkovskiy
    Having this script use DateTime; use DateTime::Format::Strptime; my $p = DateTime::Format::Strptime->new(pattern => '%F %T', time_zone => 'local'); my $dt1 = DateTime->now(time_zone=>'local')->set_time_zone('UTC'); my $dt2 = $p->parse_datetime('2010-10-23 14:10:02')->set_time_zone('UTC'); print Dumper($dt1->hms); print Dumper($dt2->hms); print Dumper($dt1 > $dt2); The problem is that $dt1 is off by 1 hour. Like $VAR1 = '12:09:55'; $VAR1 = '11:10:02'; $VAR1 = 1; If I remove set_time_zone('UTC') in both cases - dumped values are okay. My feel is that somewhere DST is taken into account unnecessarily, but can't find out. Update: I dumped $dt-time_zone-name and $dt-offset for both and that's what i get. $VAR1 = 'Europe/Kiev'; $VAR1 = 7200; $VAR1 = 'Europe/Kiev'; $VAR1 = 10800; How this could be possible?

    Read the article

  • Building TimeZone object in Java

    - by Harish
    I build a Java TimeZone object using the TimeZone String like GMT-8,GMT,PST,EST etc. This did not consider whether the timezone is daylight saving enabled or not.Now there is a requirement to include this check and instead of giving the input as PDT or EDT the daylight saving is given as a seperate flag.I am not sure whether TimeZone has a direct method to change the dayLight saving property of that TimeZone. So if I get an input like PST and DaylightSaving as true then I have to change the string as PDT.Whats even worse is sometimes I will get inputs like GMT-8 or GMT-6 with Day light flag as either true or false. Is there a way out ? I can't use thirdparty TimeZone related classes Code Sample: TimeZone timeZone = TimeZone.getTimeZone("EST"); TimeZone timeZone = TimeZone.getTimeZone("PST"); TimeZone timeZone = TimeZone.getTimeZone("GMT-8");

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >